Search

The energy sector faces a pressing need for significant transformation to curb CO2 emissions. For instance, Czechia and Germany have taken steps to phase out fossil thermal power plants by 2038, opting instead for a greater reliance on variable renewable energy sources like wind and solar power. Nonetheless, thermal power plants will still have roles, too. While the conventional multistage axial turbine design has been predominant in large-scale power plants for the past century, it is unsuitable for small-scale decentralized projects due to complexity and cost. To address this, the study investigates less common turbine types, which were discarded as they demonstrated lower efficiency. One design is the Elektra turbine, characterized by its velocity compounded radial re-entry configuration. The Elektra turbine combines the advantages of volumetric expanders (the low rotational speed requirement) with the advantages of a turbine (no rubbing seals, no lubrication in the working fluid, wear is almost completely avoided). Thus, the research goal of the authors is the implementation of a 10 kW-class ORC turbine driving a cost-effective off-the-shelf 3000 rpm generator. The paper introduces the concept of the Elektra turbine in comparison to other turbines and proposes this approach for an ORC working fluid. In the second part, the 1D design and 3D–CFD optimization of the 7 kW Elektra turbine working with Hexamethyldisiloxane (MM) is performed. Finally, CFD efficiency characteristics of various versions of the Elektra are presented and critically discussed regarding the originally defined design approach. The unsteady CFD calculation of the final Elektra version showed 46% total-to-static isentropic efficiency.

The energy industry must change dramatically in order to reduce CO2-emissions and to slow down climate change. Germany, for example, decided to shut down all large nuclear (2022) and fossil thermal power plants by 2038. Power generation will then rely on fluctuating renewables such as wind power and solar. However, thermal power plants will still play a role with respect to waste incineration, biomass, exploitation of geothermal wells, concentrated solar power (CSP), power-to-heat-to-power plants (P2H2P), and of course waste heat recovery (WHR). While the multistage axial turbine has prevailed for the last hundred years in power plants of the several hundred MW class, this architecture is certainly not the appropriate solution for small-scale waste heat recovery below 1 MW or even below 100 kW. Simpler, cost-effective turbo generators are required. Therefore, the authors examine uncommon turbine architectures that are known per se but were abandoned when power plants grew due to their poor efficiency compared to the multistage axial machines. One of these concepts is the so-called Elektra turbine, a velocity compounded radial re-entry turbine. The paper describes the concept of the Elektra turbine in comparison to other turbine concepts, especially other velocity compounded turbines, such as the Curtis type. In the second part, the 1D design and 3D computational fluid dynamics (CFD) optimization of the 5 kW air turbine demonstrator is explained. Finally, experimentally determined efficiency characteristics of various early versions of the Elektra are presented, compared, and critically discussed regarding the originally defined design approach. The unsteady CFD calculation of the final Elektra version promised 49.4% total-to-static isentropic efficiency, whereas the experiments confirmed 44.5%.