Search

The article discusses the research on surface rupture zone of seismic faults in China using high-resolution remote sensing technology and mentions the quantitative research of earthquakes. Topics include the survey on geometric and kinematic characteristics of the rupture zone; the 7.2 earthquake at Yutian in Xinjiang, China; and the use of digital elevation model the surface rupture behavior.

[Display omitted] [ABSTRACT FROM AUTHOR]

Abstract The Mw6.9 Yushu earthquake occurred on 14 April 2010, in Qinghai, China; the largest aftershock, a Mw5.8 event, occurred west of the mainshock on 29 May 2010 (˜40 days later). The aftershock had a different focal mechanism from the mainshock. Furthermore, seismicity after 29 May showed different spatial characteristics in terms of focal depth and distribution direction. To better understand the faulting and the relationship between these two events, we derived the whole displacement field caused by the Yushu mainshock and the Mw5.8 aftershock based on multi-perspective Interferometric Synthetic Aperture Radar (InSAR) data. We then conducted a robust inversion of the slip distribution jointly constrained by InSAR and GPS data. The results indicate that the Mw5.8 aftershock produced a separated deformation field with significant displacement changes of up to ˜4–6 cm, which indicates another intersecting ruptured fault at the west end of the Yushu fault. The slip distribution shows a 75-km NW rupture with a maximum slip of ˜2.1 m at a depth of ˜0–10 km on the main Yushu fault, and a 20 km NE rupture with peak slip of ˜0.4 m at a depth of ˜5–15 km on a vertical hidden fault. Both events showed a dominant left-lateral component. The total rupture length associated with the 2010 Yushu earthquake sequence reached ˜95 km. By calculating Coulomb stress changes, we confirmed that the mainshock triggered the Mw5.8 aftershock. Our results imply that the increased stress at the western end of the Yushu fault caused by the mainshock rupture may have played an important role in transferring the rupture plane from the Yushu fault to the NE hidden fault. [ABSTRACT FROM AUTHOR]

Abstract: We obtained the coseismic deformation field of the Ms7.1 earthquake in Yushu, Qinghai, China on 14 April 2010 using L band and C band SAR images. The results show that the deformation fields derived from L and C bands separately are consistent in general. They are all characterized by concentric elliptic interference fringes surrounding a NW trending fault with two local intensively deformed regions. Meanwhile they have small differences in area coverage of the deformation field, magnitude of LOS displacements and other details of deformation nearby the fault. The deformation from C band and L band covers 89∗59km square and 77∗43km square, with maximum displacements of about 45cm and 65cm in the radar line of sight, respectively. Using these two kinds of InSAR measurements separately and jointly, we constructed a three-segment fault model and inverted the coseismic fault slip of the Yushu event. The inversion results show that the slip distributions constrained by the two kinds of inSAR data are in agreement on the whole. They all indicate two concentration regions of slip distribution, one is located near the Jiegu town on the southeastern segment of the Yushu fault with a large area and the maximum slip of 2.4m, and the other is at the epicenter on the northwestern segment of the fault with a relatively small area. There are also discrepancies between the two kinds of slip distribution models. In general, the scale, magnitude, and depth of slip distribution constrained by C band ASAR data are larger than that by L band PALSAR data. The slip distribution from a joint inversion of the two kinds of SAR data is considered to be the most robust model compared to the results of that constrained by L band SAR data or C band SAR data alone. [Copyright &y& Elsevier]

We investigate the slip distribution of the 2008 May 12 Wenchuan M 7.9 earthquake using GPS data and InSAR measurements under a linear inversion scheme, with emphasis on the effect of three factors, including constraint on rake, different discretizations, and layered elastic model. Within our inversion parameterization context, we find the most influential factor would be constraint on rake. Without constraint on rake, the slip model seems physically wrong under the depth of 15 km, due to the limited depth resolution of the geodetic data used, especially the one orbit of InSAR measurements. Thus it is necessary to add a priori to the slip rake to obtain a reasonable fault source model. Different discretizations of the subfault patches have a notable impact on the slip distribution. Also, the layered elastic model predicts more slip at depth than does the half-space model, by about 15-20 per cent. The characteristics of slip distribution established through our inversions include some points as follows: (1) the most reliable results would be expected at depth range of 0-15 km; (2) three peak-slip asperities are inverted, at Yingxiu county (near epicentre), Yuejiashan county, and Beichuan county, respectively; (3) the inverted rake along the Yingxiu-Beichuan fault changes from dominantly thrusting motion at the southwest segments to dominant right-lateral or even pure right-lateral strike slip at the northeast segments, and (4) only thrust slip is occurred on the Guanxian-Jiangyou fault. [ABSTRACT FROM AUTHOR]

Abstract: On 21 March 2008, an Ms7.3 earthquake occurred at Yutian County, Xinjiang Uygur Autonomous Region, which is in the same year as 2008 Mw 7.9 Wenchuan earthquake. These two earthquakes both took place in the Bayar Har block, while Yutian earthquake is located in the west edge and Wenchuan earthquake is in the east. The research on source characteristics of Yutian earthquake can serve to better understand Wenchuan earthquake mechanism. We attempt to reveal the features of the causative fault of Yutian shock and its co-seismic deformation field by a sensitivity-based iterative fitting (SBIF) method. Our work is based on analysis and interpretation to high-resolution satellite (Quickbird) images as well as D-InSAR data from the satellite Envisat ASAR, in conjunction with the analysis of seismicity, focal mechanism solutions and active tectonics in this region. The result shows that the 22km long, nearly NS trending surface rupture zone by this event lies on a range-front alluvial platform in the Qira County. It is characterized by distinct linear traces and a simple structure with 1–3m-wide individual seams and maximum 6.5m width of a collapse fracture. Along the rupture zone are seen many secondary fractures and fault-bounded blocks by collapse, exhibiting remarkable extension. The co-seismic deformation affected a big range 100km×40km. D-InSAR analysis indicates that the interferometric deformation field is dominated by extensional faulting with a small strike-slip component. Along the causative fault, the western wall fell down and the eastern wall, that is the active unit, rose up, both with westerly vergence. The maximum subsidence displacement is ∼2.6m in the LOS, and the maximum uplift is 1.2m. The maximum relative vertical dislocation reaches 4.1m, which is 10km distant from the starting rupture point to south. The 42km-long seismogenic fault in the subsurface extends in NS direction as an arc, and it dipping angle changes from 70° near the surface to 52° at depth ∼10km. The slip on the fault plane is concentrated in the depth range 0–8km, forming a belt of length 30km along strike on the fault plane. There are three areas of concentrating slip, in which the largest slip is 10.5m located at the area 10km distant from the initial point of the rupture. [Copyright &y& Elsevier]

Investigating relationships between temporally- and spatially-related continental earthquakes is important for a better understanding of the crustal deformation, the mechanism of earthquake nucleation and occurrence, and the triggering effect between earthquakes. Here we utilize Global Positioning System (GPS) velocities before and after the 2008 Mw 7.9 Wenchuan earthquake to invert the fault coupling of the Longmenshan Fault (LMSF) and investigate the impact of the 2008 Mw 7.9 Wenchuan earthquake on the 2013 Mw 6.6 Lushan earthquake. The results indicate that, before the 2008 Mw 7.9 Wenchuan earthquake, fault segments were strongly coupled and locked at a depth of ~18 km along the central and northern LMSF. The seismic gap between the two earthquake rupture zones was only locked at a depth < 5 km. The southern LMSF was coupled at a depth of ~10 km. However, regions around the hypocenter of the 2013 Mw 6.6 Lushan earthquake were not coupled, with an average coupling coefficient ~0.3. After the 2008 Mw 7.9 Wenchuan earthquake, the central and northern LMSF, including part of the seismic gap, were decoupled, with an average coupling coefficient smaller than 0.2. The southern LMSF, however, was coupled to ~20 km depth. Regions around the hypocenter of the 2013 Mw 6.6 Lushan earthquake were also coupled. Moreover, by interpreting changes of the GPS velocities before and after the 2008 Mw 7.9 Wenchuan earthquake, we find that the upper crust of the eastern Tibet (i.e., the Bayan Har block), which was driven by the postseismic relaxation of the 2008 Mw 7.9 Wenchuan earthquake, thrust at an accelerating pace to the Sichuan block and result in enhanced compression and shear stress on the LMSF. Consequently, downdip coupling of the fault, together with the rapid accumulation of the elastic strain, lead to the occurrence of the 2013 Mw 6.6 Lushan earthquake. Finally, the quantity analysis on the seismic moment accumulated and released along the southern LMSF show that the 2013 Mw 6.6 Lushan earthquake should be defined as a “delayed” aftershock of the 2008 Mw 7.9 Wenchuan earthquake. The seismic risk is low along the seismic gap, but high on the unruptured southwesternmost area of the 2013 Mw 6.6 Lushan earthquake. [ABSTRACT FROM AUTHOR]