66 results on '"Wu, K."'
Search Results
2. Processing, Microstructure and Mechanical Properties of Ti6Al4V Particles-Reinforced Mg Matrix Composites
- Author
-
Wang, X. M., Wang, X. J., Hu, X. S., Wu, K., and Zheng, M. Y.
- Published
- 2016
- Full Text
- View/download PDF
3. The Development of Steel Band Feeding for HSLA Heavy Plates
- Author
-
Isayev, O., Hress, O., Hu, C. Y., Xin, R., and Wu, K. M.
- Published
- 2016
- Full Text
- View/download PDF
4. Shear rheology and melt compounding of compatibilized-polypropylene nanocomposites: effect of compatibilizer molecular weight
- Author
-
Wang, Yeh, Chen, F.-B., Wu, K.-C., and Wang, J.-C.
- Subjects
Rheology -- Analysis -- Chemical properties -- Mechanical properties ,Polypropylene -- Structure -- Chemical properties -- Mechanical properties -- Analysis ,Engineering and manufacturing industries ,Science and technology ,Structure ,Analysis ,Chemical properties ,Mechanical properties - Abstract
Direct melt compounding was used to prepare nanocomposites of organophilic montmorillonite (o-mmt) clay dispersed in maleated polypropylenes (PPgMA) as well as nanocomposites of organoclay and polypropylene (PP) modified with various grades of PPgMA compatibilizers. The thermal effect on the rheology and melt compounding was first investigated with a plasticorder. The shear viscosities and the melt flow indices (MFI) of the PPgMA compatibilizers were sensitive to the blending temperature, which had to be varied with the compatibilizer grade to achieve desirable level of torque for extensive exfoliation of organoclay in the plasticorder. However, for low molecular weight oligomer, the clay dispersion was poor because of low shear viscosity and thermal instability. Next, the PPgMA-modified PP/organoclay nanocomposites were prepared on a corotating twin-screw extruder. The nanoscale dimensions of the dispersed clay platelets led to significantly increased linear viscoelastic properties, which were qualitatively correlated with the state of exfoliation in the nanocomposites. The relative viscosity (relative to the silicate-free matrix) curves revealed a systematic trend with the extent of clay exfoliation. Furthermore, the degree of clay dispersion was found to increase with the loading of compatibilizers; however, high loading of compatibilizer compromised the final moduli of the nanocomposites. POLYM. ENG. SCI., 46:289-302, 2006. © 2006 Society of Plastics Engineers, INTRODUCTION Commercial exploitation of isotactic polypropylene has been expanded rapidly since the development of 'Zieglertype' catalysts in 1950s. It is because of polypropylene's attractive characters of low cost, low weight, [...]
- Published
- 2006
5. Tensile instability and deformation behavior of rapidly heated metals in a constant-load environment
- Author
-
Jones, H. N. and Wu, K. M.
- Published
- 1990
- Full Text
- View/download PDF
6. Magnesium matrix composite reinforced by nanoparticles – A review.
- Author
-
Nie, K.B., Wang, X.J., Deng, K.K., Hu, X.S., and Wu, K.
- Subjects
MAGNESIUM ,METAL nanoparticles ,NANOPARTICLES ,NANOPARTICLE size - Abstract
Significant progress has been made in magnesium-based composites during recent decades, especially for the appearance of magnesium matrix composite reinforced by nanoparticles. The nanoparticles added not only exhibit a good strengthening effect, but also maintain the initial toughness of the matrix, effectively balancing the contradiction between the strength and plasticity in the traditional magnesium matrix composites. The magnesium matrix nanocomposites with excellent mechanical properties have pushed the development of magnesium matrix composites to a new stage. However, it is very difficult to disperse the nanoparticles in metal melt especially in magnesium melt which is different from other metal melts and dangerous during the cast processing. This means that the preparation of magnesium matrix nanocomposite is extremely challenging. Further, the magnesium matrix nanocomposites possess a distinctive characteristic in deformation behavior, strengthening and toughening mechanism due to their special size effect of nanoparticles. Accordingly, this review will focus on the new preparation technologies, deformation behavior, mechanical properties and strengthening and toughening mechanisms. The potential applications, development trends and future research ideas of magnesium matrix nanocomposite are also prospected. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
7. Microstructure and mechanical properties of spark plasma sintered titanium‐added copper/reduced graphene oxide composites.
- Author
-
Zhang, X., Wu, K., Liu, X., Ge, X., and Yang, W.
- Subjects
- *
GRAPHENE oxide , *TITANIUM powder , *COPPER , *MICROSTRUCTURE , *SOLID solutions , *COMPRESSIVE strength - Abstract
Copper matrix composites were fabricated through mixing fixed amount of reduced graphene oxide and the different amounts of titanium. The dried copper/titanium/reduced graphene oxide mixture powders were firstly obtained by the wet‐mixing process, and then the spark plasma sintering process realized their faster densification. In the as‐sintered bulk composites, the layered reduced graphene oxide network, uniform titanium particles and copper‐titanium solid solution are observed in copper matrix. Investigations on mechanical properties show that the as‐prepared bulk composites exhibit the hardness and compressive yield strength compared with single reduced graphene oxide added composites. Increased titanium addition resulted into higher hardness and strength. The relevant formation and failure mechanisms of the composites and their influence on mechanical properties were discussed. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
8. Development of High Performance Magnesium Matrix Nanocomposites Using Nano-SiC Particulates as Reinforcement.
- Author
-
Shen, M., Ying, W., Wang, X., Zhang, M., and Wu, K.
- Subjects
MAGNETISM -- Experiments ,MAGNESIUM group ,LIGHT metals ,METAL extrusion ,MICROSTRUCTURE - Abstract
In the present study, magnesium-based composites with three different volume percentages of nano-sized SiC particulates (SiCp) reinforcement were fabricated using a simple and inexpensive technique followed by hot extrusion. Microstructural characterization of the materials revealed uniform distribution of nano-size SiCp and obvious grain refinement. The tensile test result indicates a remarkable improvement on the strength for the as-extruded SiCp/AZ31B nanocomposite, while the elongation to fracture was decreased by comparing with the AZ31B alloy. Although, compared with the as-extruded AZ31B alloy, the ductility of the SiCp-reinforced AZ31B nanocomposite is decreased, but the ductility of the present SiCp-reinforced AZ31B nanocomposite is far higher than that of the conventional micron or submicron SiCp-reinforced magnesium matrix composites. It is concluded that, compared with the larger sized (micron or submicron) particles, the addition of nano SiCp in the AZ31B alloy resulted in the best combination of the strength and ductility. An attempt is made in the present study to correlate the effect of presence of nano-SiCp as reinforcement and its increasing amount with the microstructural and mechanical properties of magnesium. [ABSTRACT FROM AUTHOR]
- Published
- 2015
- Full Text
- View/download PDF
9. Microstructure and room temperature tensile properties of 1 μm-SiCp/AZ31B magnesium matrix composite.
- Author
-
Shen, M.J., Wang, X.J., Zhang, M.F., Zhang, B.H., Zheng, M.Y., and Wu, K.
- Subjects
MICROSTRUCTURE ,TEMPERATURE ,TENSILE strength ,MAGNESIUM compounds ,TRANSMISSION electron microscopes - Abstract
In the present study, AZ31B magnesium matrix composites reinforced with two volume fractions (3 and 5 vol.%) of micron-SiC particles(1 μm) were fabricated by semisolid stirring assisted ultrasonic vibration method. The as-cast ingots were extruded at 350 °C with the extrusion ratio of 15:1 at a constant ram speed of 15 mm/s. The microstructure of the composites was investigated by optical microscopy, scanning electron microscope and transmission electron microscope. Microstructure characterization of the composites showed relative uniform reinforcement distribution and significant grain refinement. The presence of 1 μm-SiC particles assisted in improving the elastic modulus and tensile strength. The ultimate tensile strength and yield strength of the 5 vol.% SiCp/AZ31B composites were simultaneously improved. [ABSTRACT FROM AUTHOR]
- Published
- 2015
- Full Text
- View/download PDF
10. Microstructure and mechanical properties of the Mg/Al laminated composite fabricated by accumulative roll bonding (ARB)
- Author
-
Wu, K., Chang, H., Maawad, E., Gan, W.M., Brokmeier, H.G., and Zheng, M.Y.
- Subjects
- *
MICROSTRUCTURE , *MECHANICAL behavior of materials , *SCANNING electron microscopy , *LAMINATED materials , *ALUMINUM-magnesium alloys , *TEMPERATURE effect , *SEALING (Technology) , *MICROHARDNESS - Abstract
Abstract: The Mg/Al laminated composite was fabricated by the accumulative roll bonding (ARB) using the pure magnesium and Al5052 alloy at 400°C. Tensile properties along rolling direction and the transverse direction and the microhardness were evaluated at the ambient temperature. The tensile strength of the laminated Mg/Al composite along both directions increased gradually till two ARB cycles, but then decreased after the third ARB cycles. Optical microscopy and scanning electron microscopy (SEM) were utilized to reveal the microstructure evolution and the failure mechanism. Grain refinement of Mg layers was not obvious during the ARB process due to the high temperature and interval reheating. The obvious crack at the coarse intermetallic compounds and rupture of the Al layer after the third cycle led to the premature failure of the sample along the rolling direction during the tensile test. [Copyright &y& Elsevier]
- Published
- 2010
- Full Text
- View/download PDF
11. Low frequency damping capacities and mechanical properties of Mg–Si alloys
- Author
-
Hu, X.S., Wu, K., Zheng, M.Y., Gan, W.M., and Wang, X.J.
- Subjects
- *
DAMPING (Mechanics) , *MAGNESIUM alloys , *METALLIC composites , *DISLOCATIONS in crystals - Abstract
Abstract: The effect of Si content on low frequency damping capacities and mechanical properties of as-cast Mg–Si alloys were investigated. Both hypoeutectic alloys with 0.3wt.%Si, 0.8wt.%Si and hypereutectic alloy with 2.3wt.%Si exhibit high damping capacities since these Mg–Si alloys possess large size α-Mg phase with very small amount of soluble atoms in it. The amount of the in situ formed Mg2Si determines the dislocation density and then influences the damping capacity of these Mg–Si alloys. The Mg–0.3wt.%Si alloy exhibits the lowest damping value at small strain region but the highest damping value at large strain region among these Mg–Si alloys. Two damping peaks were found in Mg–Si alloys at 80 and 230°C, respectively. But the addition of Al in Mg–Si alloy impeded the appearance of these two damping peaks since the soluble Al atoms hindered the movement of dislocations and the slide of grain boundaries. The presence of large size, brittle primary Mg2Si particles decreases the tensile strength and ductility of the hypereutectic Mg–Si alloy. [Copyright &y& Elsevier]
- Published
- 2007
- Full Text
- View/download PDF
12. Effects of microarc oxidation surface treatment on the mechanical properties of Mg alloy and Mg matrix composites
- Author
-
Wu, K., Wang, Y.Q., and Zheng, M.Y.
- Subjects
- *
MAGNESIUM alloys , *OXIDATION , *SURFACES (Technology) , *STRENGTH of materials , *PROTECTIVE coatings - Abstract
Abstract: Mechanical properties of coated AZ91 Mg alloy, Al18B4O33w/AZ91 and SiCw/AZ91 composites by microarc oxidation (MAO) surface treatment technique were measured and effects of MAO treatment on the mechanical properties were investigated. Tensile test shows that MAO treatment just slightly decreases ultimate tensile strength (UTS) and elongation of the Mg-based materials, while enhances their elastic modulus to some extent. But the effects of MAO treatment on the mechanical properties will be influenced by the energy parameters applied during surface treatment. The three materials coated under the same process conditions have exhibited differential surface morphology and fracture after tensile test, which indirectly indicates that the qualities of MAO coatings are also related with the substrate materials. [Copyright &y& Elsevier]
- Published
- 2007
- Full Text
- View/download PDF
13. The effect of thermal exposure on the interface and mechanical properties of Al18B4O33w/AZ91 magnesium matrix composite
- Author
-
Zheng, M.Y., Wu, K., Liang, M., Kamado, S., and Kojima, Y.
- Subjects
- *
MECHANICAL properties of metals , *MAGNESIUM , *BORATES , *ALUMINUM - Abstract
The effect of high temperature exposure on the interface and tensile properties of Al18B4O33w/AZ91 magnesium matrix composite fabricated by squeeze casting was studied. The interfaces of the composites were examined using transmission electron microscopy, and the mechanical properties were evaluated by tensile tests. The interfacial region was composed of MgO which was formed by the reaction between the Al18B4O33 whisker and the Mg matrix. An thin and uniform interfacial reaction layer with a thickness of 10–20 nm formed during squeeze casting could act as a barrier to prevent the further reaction between Al18B4O33 whisker and Mg alloys. The interfacial reaction rate was very low during thermal exposure below the liquidus temperature of AZ91 matrix alloy. Only after exposure above the liquidus temperature of the AZ91 matrix alloy for a long period, the thickness of the interfacial layer increased obviously. However, the interfacial reaction rate was much slower than that in the Al18B4O33w/Al–Mg composites. The interfacial reaction kinetics was controlled by the seepage of Mg and release of Al and B along the narrow diffusion channels between the fine MgO particle. The composite did not show a degradation in the tensile properties after exposure below the solidus temperature of AZ91 for long periods, suggesting that the Al18B4O33w/AZ91 magnesium matrix composite could be subjected to long-term service at elevated temperature. [Copyright &y& Elsevier]
- Published
- 2004
- Full Text
- View/download PDF
14. The Comparison in the Microstructure and Mechanical Properties between AZ91 Alloy and Nano-SiCp/AZ91 Composite Processed by Multi-Pass Forging Under Varying Passes and Temperatures.
- Author
-
Nie, K.B., Han, J.G., Deng, K.K., Wang, X.J., Xu, C., and Wu, K.
- Subjects
ALLOYS ,GRAIN size ,CRYSTALLIZATION ,MICROSTRUCTURE ,COMPOSITE materials ,MECHANICAL behavior of materials ,YIELD strength (Engineering) - Abstract
In this study, both AZ91 alloy and nano-SiCp/AZ91 composite were subjected to multi-pass forging under varying passes and temperatures. The microstructure and mechanical properties of the alloy were compared with its composite. After six passes of multi-pass forging at a constant temperature of 400 ℃, complete recrystallization occurred in both the AZ91 alloy and composite. The decrease of temperature and the increase of passes for the multi-pass forging led to further refinement of dynamic recrystallized grains and dynamic precipitation of second phases. The grain size of the nano-SiCp/AZ91 composite was smaller than that of the AZ91 alloy under the same multi-pass forging condition, which indicated that the addition of SiC nanoparticles were beneficial to grain refinement by pinning the grain boundaries. The texture intensity for the 12 passes of multi-pass forging with varying temperatures was increased compared with that after nine passes. The ultimate tensile strength is slightly decreased while the yield strength was increased unobviously for the AZ91 alloy with the decrease of temperature and the increase of the passes for the multi-pass forging. Under the same condition of multi-pass forging, the yield strength of the composite was higher than that of the AZ91 alloy due to the Orowan strengthening effect and grain refinement strengthening resulting from externally applied SiC nanoparticles and internally precipitated second phases. By comparing the microstructure and mechanical properties between the AZ91 alloy and nano-SiCp/AZ91 composite, the strength-toughness properties of the composites at room temperature were affected by the matrix grain size, texture evolution, SiC nanoparticles distribution and the precipitated second phases. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
15. Annealing hardening/softening of nanocrystalline Ta films mediated by grain boundary evolution and phase transformation.
- Author
-
Zuo, J.D., Wang, Y.Q., Wu, K., Zhang, J.Y., Liu, G., and Sun, J.
- Subjects
- *
PHASE transitions , *CRYSTAL grain boundaries , *GRAIN , *LOW temperatures , *COMPARATIVE method , *RESEARCH personnel , *WATER softening - Abstract
Due to its service background, the thermal behavior of Ta films is substantially concerning to researchers, especially the heat-induced β-Ta to α-Ta phase transformation. In this work, the nanocrystalline Ta films with varying β/α phase ratios (0.85–0) were deposited and vacuum annealed at 200–800 °C to study the phase transformation behavior and mechanical properties. Partial phase transformation of β-Ta to α-Ta occurred at low temperature (200 °C) and complete transformation when the annealing temperature was raised to 800 °C. Moreover, an orientation relationship of β-<110>//α-<111> and β-{330}//α-{110} was concluded, and a hypothesis theory about the low-temperature phase transformation was proposed. Annealing hardening took place at 200–600 °C and softening at 800 °C in all the samples. The hardening is mostly due to the ordering of intergranular amorphous phases with the temperature increased, simultaneously bringing the increase of modulus. The annealing softening is governed by both grain coarsening and phase transformation, where the latter is dominated in high β fraction samples. • High-temperature induced grain boundary structure ordering promotes the hardening of Ta films at 200 °C–600 °C. • β-Ta to α-Ta phase transformation was found at a wide temperature range, which partially governs the softening of Ta at 800 °C. • A preferred orientation relationship of β-<110>{330}//α-<111>{110} was concluded • The influence of phase transformation on mechanical properties was independently quantified using a simple comparative method. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
16. Influence of rolling temperature on the microstructure and mechanical properties of Mg–Gd–Y–Zn–Zr alloy sheets
- Author
-
Xu, C., Zheng, M.Y., Wu, K., Wang, E.D., Fan, G.H., Xu, S.W., Kamado, S., Liu, X.D., Wang, G.J., and Lv, X.Y.
- Subjects
- *
ZIRCONIUM alloys , *ROLLING (Metalwork) , *METAL microstructure , *MECHANICAL properties of metals , *STRAINS & stresses (Mechanics) , *CRYSTAL grain boundaries , *PHASE distortion (Electronics) - Abstract
Abstract: The extruded Mg–8.2Gd–3.8Y–1.0Zn–0.4Zr (wt%) alloy were subjected to large-strain hot rolling with different final rolling temperatures. The microstructural evolution and mechanical properties of the sheets were investigated. The microstructure became homogeneous after hot rolling process and long period stacking ordered (LPSO) phase distributed at grain boundaries along rolling direction. The sheet rolled at 300°C was composed of deformed grains, substructures and excessive dislocations. With increasing final rolling temperatures from 300°C to 400°C, the volume fraction of recrystallized grains with relatively random orientations increased significantly. The strength of the rolled sheets was improved while the ductility was deteriorated with decreasing final rolling temperatures. The tensile yield strength and ultimate tensile strength of the sheet rolled at 300°C reached 320MPa and 416MPa, respectively with the elongation to failure of 5.3%. The mechanical anisotropy of the rolling sheet became unity when rolled at higher temperature of 400°C due to the formation of weaker basal texture. [Copyright &y& Elsevier]
- Published
- 2013
- Full Text
- View/download PDF
17. Effect of cooling rate on the microstructure evolution and mechanical properties of homogenized Mg–Gd–Y–Zn–Zr alloy
- Author
-
Xu, C., Zheng, M.Y., Wu, K., Wang, E.D., Fan, G.H., Xu, S.W., Kamado, S., Liu, X.D., Wang, G.J., and Lv, X.Y.
- Subjects
- *
MANGANESE alloys , *COOLING , *METAL microstructure , *MECHANICAL properties of metals , *METAL quenching , *CRYSTAL grain boundaries , *PARTICLE size distribution , *STRENGTH of materials - Abstract
Abstract: Different cooling processes, such as quenching in warm water and cooling in furnace, were introduced to homogenize Mg–8.2Gd–3.8Y–1.0Zn–0.4Zr (wt%) alloy. Microstructure evolution and mechanical properties of the homogenized alloy were investigated. The as-quenched sample was comprised of α-Mg matrix, Mg5RE phase and 18R LPSO phase distributed at the grain boundaries and a few of RE-rich particles distributed randomly. During the process of cooling in furnace, Mg5RE and 18R LPSO phases were transformed into block-shaped 14H LPSO phase and lamellar-shaped 14H LPSO phase, respectively, due to the diffusion of solute atoms into the α-Mg matrix. Furthermore, the lamellar-shaped 14H LPSO phase grew and ran through the whole grains. The as-quenched sample exhibits tensile yield strength of 130MPa, ultimate tensile strength of 206MPa and elongation to failure of 5.5%, while the sample cooled in the furnace exhibits higher tensile yield strength but lower ultimate tensile strength and ductility due to the coarse grains and formation of block-shaped 14H LPSO phase. [Copyright &y& Elsevier]
- Published
- 2013
- Full Text
- View/download PDF
18. Effect of final rolling reduction on the microstructure and mechanical properties of Mg–Gd–Y–Zn–Zr alloy sheets
- Author
-
Xu, C., Zheng, M.Y., Wu, K., Wang, E.D., Fan, G.H., Xu, S.W., Kamado, S., Liu, X.D., Wang, G.J., Lv, X.Y., Li, M.J., and Liu, Y.T.
- Subjects
- *
MANGANESE alloys , *ROLLING (Metalwork) , *METAL microstructure , *MECHANICAL properties of metals , *METALS , *CRYSTAL texture , *RECRYSTALLIZATION (Metallurgy) - Abstract
Abstract: The Mg–8.2Gd–3.8Y–1.0Zn–0.4Zr (wt.%) alloy was hot rolled with different final rolling reductions at 400°C. The microstructure evolution and texture of the sheets were analyzed, and their effect on the mechanical properties was discussed. All of the rolled sheets consist of fine dynamically recrystallized grains with almost random orientation, large deformed grains with strong basal texture. In addition, bent lamellar-shaped long period stacking ordered (LPSO) phases due to kink deformation were observed in the deformed grains. The volume fraction of the dynamic recrystallization increased with increasing final rolling reduction and the basal texture weakened gradually. The strength of the alloy sheets changed a little with increasing final rolling reduction, while the yield anisotropy and the ductility were significantly improved. The sheet final-rolled with thickness reduction of 60% exhibits tensile yield strength of 306MPa, ultimate tensile strength of 393MPa and elongation to failure of 14.6% at ambient temperature, and tensile yield strength of 264MPa, ultimate tensile strength of 345MPa and elongation to failure of 19.4% at 250°C. [Copyright &y& Elsevier]
- Published
- 2013
- Full Text
- View/download PDF
19. Development of SiCp/AZ91 magnesium matrix nanocomposites using ultrasonic vibration
- Author
-
Nie, K.B., Wang, X.J., Wu, K., Hu, X.S., and Zheng, M.Y.
- Subjects
- *
SILICON carbide , *MAGNESIUM alloys , *NANOCOMPOSITE materials , *ULTRASONICS , *STRENGTH of materials , *FRACTURE mechanics , *CRYSTAL grain boundaries - Abstract
Abstract: Magnesium matrix nanocomposites reinforced by SiC nanoparticles were fabricated by ultrasonic vibration with SiC nanoparticle size of 60nm and volume fractions of 0.5%, 1% and 2%, respectively. With increasing the volume fraction of the SiC nanoparticles, grain size of matrix in the SiCp/AZ91 nanocomposites was gradually decreased and morphology of the phase Mg17Al12 was refined compared with as-cast AZ91 alloy. Most of the SiC nanoparticles exhibited a homogeneous distribution in the 0.5 and 1vol.% SiCp/AZ91 nanocomposites. The ultimate tensile strength, yield strength and elongation to fracture of the 0.5 and 1vol.% SiCp/AZ91 nanocomposites were simultaneously improved. However, agglomerates of SiC nanoparticles along the grain boundaries were evidently increased when the volume fraction of nanoparticles was increased to 2, which caused the decrease of ultimate tensile strength and elongation to fracture. [Copyright &y& Elsevier]
- Published
- 2012
- Full Text
- View/download PDF
20. Microstructure and mechanical properties of the accumulative roll bonded (ARBed) pure magnesium sheet
- Author
-
Chang, H., Zheng, M.Y., Wu, K., Gan, W.M., Tong, L.B., and Brokmeier, H.-G.
- Subjects
- *
METAL microstructure , *MECHANICAL properties of metals , *SHEET metal , *MAGNESIUM , *METAL bonding , *HEAT treatment of metals , *CRYSTAL texture , *METALS - Abstract
Abstract: The pure Mg sheets were processed by ARB at 400°C and 300°C up to 8 cycles and 4 cycles, respectively. The microstructure was refined during the first cycle and only homogenized during the following ARB process due to the high deformation temperature, intermediate reheating and air-cooling. The ARB process did not show an obvious effect on the tensile properties of the as-ARBed pure Mg sheet due to the stable grain size and dominant basal plane texture during ARB. Further deformation should be introduced to improve the bonding quality of the as-ARBed sheet. [ABSTRACT FROM AUTHOR]
- Published
- 2010
- Full Text
- View/download PDF
21. Superplasticity of Mg–Zn–Y alloy containing quasicrystal phase processed by equal channel angular pressing
- Author
-
Zheng, M.Y., Xu, S.W., Wu, K., Kamado, S., and Kojima, Y.
- Subjects
- *
SUPERPLASTICITY , *METALS , *DUCTILITY , *QUASICRYSTALS , *CRYSTAL growth , *ALLOYS - Abstract
Abstract: Equal channel angular pressing (ECAP) has been conducted on as-cast Mg–4.3 wt.%Zn–0.7 wt.%Y Mg alloy containing quasicrystal phase at a temperature of 623 K. After 8 ECAP passes, the grain size of the as-cast alloy is decreased from ∼120 to ∼3.5 μm, and the coarse eutectic quasicrystal phases are broken and dispersed in the alloy. Tensile testing has been performed on the ECAPed Mg–Zn–Y alloy at temperatures of 523 K and 623 K with initial strain rates from 1.5×10−3 to 1.5×10−4 s−1. The ECAPed alloy exhibits a maximum elongation of about 600% when testing at 623 K using an initial strain rate of 1.5×10−4 s−1. Grain boundary sliding is considered to be the dominant deformation mechanism of the Mg–Zn–Y alloy in the temperature and strain-rate range investigated. [Copyright &y& Elsevier]
- Published
- 2007
- Full Text
- View/download PDF
22. Tuning the microstructure and mechanical properties of magnetron sputtered Cu-Cr thin films: The optimal Cr addition.
- Author
-
Li, X.G., Cao, L.F., Zhang, J.Y., Li, J., Zhao, J.T., Feng, X.B., Wang, Y.Q., Wu, K., Zhang, P., Liu, G., and Sun, J.
- Subjects
- *
THIN films , *MICROSTRUCTURE , *MECHANICAL properties of metals , *SOLID state electronics , *MORPHOLOGY - Abstract
Grain boundary (GB) engineering via alloying opens a pathway to design the interfaces in alloys for tuning their mechanical properties, thus it is quite critical to determine the optimum addition of alloying element. Here, we prepared immiscible Cu-Cr alloyed thin films by non-equilibrium magnetron sputtering deposition to study Cr alloying effects on the microstructure and mechanical properties of Cu thin films. It is found that Cr doping can notably refine the grains and promote the formation of fully nanotwinned columnar grains at low Cr volume concentrations (≤∼3.7 at.%) associated with the average GB Cr concentrations ≤ ∼15 at.%, beyond which the formation of nanotwins is significantly suppressed. The role of Cr atoms/clusters played in the twinning process is rationalized in terms of dislocation rebound-promotion mechanism. Importantly, a maximum hardness is discovered at the optimum Cr addition of ∼2.0 at.%. The Cr concentration-dependent hardness of Cu-Cr alloyed films was quantified by a combined strengthening model. The achievement of the maximum hardness was related to the greatest GB solute segregation-induced strength contribution. It is further uncovered that the Cu-Cr system exhibits strain rate sensitivity (SRS, m ) monotonically reduced with increasing the Cr concentration, ranging from a positive m of 0.0314 (for pure Cu) to a negative m of −0.0245, which is attributed to a competition between the dislocation-boundary interactions (increasing m ) and the dislocation-solute atoms interactions (decreasing m ). These findings provide valuable insights into tuning the composition of alloyed thin films to achieve optimized mechanical performance. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
23. Precipitate characteristics and synergistic strengthening realization of graphene nanoplatelets reinforced bimodal structural magnesium matrix composites.
- Author
-
Xiang, S.L., Hu, X.S., Wang, X.J., Wang, L.D., and Wu, K.
- Subjects
- *
GRAPHENE , *MICROSTRUCTURE , *MAGNESIUM alloys , *COMPOSITE materials , *METAL extrusion - Abstract
This study investigates the precipitation behavior in the graphene nanoplatelets (GNPs) reinforced bimodal structural Mg-6Zn (wt%) matrix composite. The GNPs with an increasing content progressively accelerate the age-hardening response in the local regions of the composite. The composite takes only half the time that the Mg-6Zn alloy needs to reach the peak strength when aging at 200 °C. The observation reveals that the planar and wrinkled GNPs in the composite act as the effective trigger of dislocations and collector of solute atoms to accelerate the precipitation. It is concluded that GNPs have a pronounced effect on the development of matrix microstructure. Moreover, the orientation relationship between the aligned GNPs towards the extrusion direction and the matrix grains with a fiber type texture makes the GNPs and [0001] Mg precipitate rods constitute a hybrid strengthening architecture in the composite. As a result, the synergistic strengthening effect of the GNPs and the precipitates is realized. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
24. Alloying effects on the microstructure and mechanical properties of nanocrystalline Cu-based alloyed thin films: Miscible Cu-Ti vs immiscible Cu-Mo.
- Author
-
Zhang, J.Y., Zhao, J.T., Li, X.G., Wang, Y.Q., Wu, K., Liu, G., and Sun, J.
- Subjects
- *
MICROSTRUCTURE , *MECHANICAL properties of metals , *THIN films , *NANOCRYSTALS , *SOLID solutions - Abstract
Tuning the microstructure to optimize the mechanical performance of nanocrystalline Cu thin films via the alloying strategy is quite important for their application in microdevices. In this work, we prepared nanocrystalline miscible Cu-Ti and immiscible Cu-Mo alloyed thin films to investigate alloying effects on the microstructure and mechanical properties of Cu thin films in terms of mixing enthalpies. It is found that the dopants of both Ti and Mo can notably refine the grains, and in particular promote the formation of nanotwins below a critical content of solute, beyond which the formation of nanotwins is notably suppressed. The nonmonotonic solute concentration-dependent twinning behavior observed in Cu-Ti and Cu-Mo alloyed thin films is explained by the coupling effects between grain size and grain boundary segregated dopants that affects the stimulated slip process of partials. The increased hardness of both Cu-Ti and Cu-Mo systems with increasing the solute contents are quantitatively explained by combining several strengthening mechanisms, including solid solution strengthening, grain/twin boundary (GB/TB) strengthening, solute segregation-induced strengthening. It unexpectedly appears that with increasing the solute contents, the Cu-Ti system exhibits monotonically reduced positive strain rate sensitivity (SRS, m ), whereas the Cu-Mo system manifests almost constant negative SRS. The fundamental difference in SRS m between Cu-Ti and Cu-Mo is rationalized in terms of the interactions between solute atomic clusters and dislocations based on the cross-core diffusion mechanism. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
25. The partial substitution of Y with Gd on microstructures and mechanical properties of as-cast and as-extruded Mg-10Zn-6Y-0.5Zr alloy.
- Author
-
Jiang, H.S., Qiao, X.G., Zheng, M.Y., Wu, K., Xu, C., and Kamado, S.
- Subjects
- *
MAGNESIUM-yttrium alloys , *MECHANICAL behavior of materials , *MICROSTRUCTURE , *RECRYSTALLIZATION (Metallurgy) , *GRAIN size , *TENSILE strength - Abstract
Mg-10Zn-6Y-0.5Zr (wt%) alloy and Mg-10Zn-3Y-3Gd-0.5Zr (wt%) alloy with medium RE content have been fabricated by conventional casting and indirect extrusion. The as-extruded Mg-10Zn-6Y-0.5Zr (wt%) alloy shows a bimodal microstructure containing dynamic recrystallized (DRXed) grains with average grain size of 2 μm and deformed regions. In addition to the fragmented W phase particle bands distributing along the extrusion direction, large amount of nano W phase and small amount of nano β 2 ′ phase are precipitated in the matrix. While the as-extruded Mg-10Zn-3Y-3Gd-0.5Zr (wt%) alloy exhibits completely dynamic recrystallized microstructure with average grain size of 3 μm. The broken W phase particles are distributed homogeneously in the matrix. Icosahedral quasicrystal phase layer is observed at the surface of some W phase particles in the as-extruded Mg-10Zn-3Y-3Gd-0.5Zr alloy. The as-extruded Mg-10Zn-6Y-0.5Zr (wt%) alloy exhibits yield strength of 341 MPa, ultimate tensile strength of 368 MPa and elongation to failure of 6.8%. While the as-extruded Mg-10Zn-3Y-3Gd-0.5Zr (wt%) alloy shows lower yield strength of 247 MPa, ultimate tensile strength of 330 MPa and higher elongation to failure of 19.8%. The higher strength in the as-extruded Mg-10Zn-6Y-0.5Zr (wt%) alloy is mainly attributed to higher area fraction of unDRXed regions with strong texture and the precipitation of nano W and β 2 ′ phase. The fully recrystallized microstructure with weak texture and the formation of icosahedral quasicrystal phases with good coherent bond with α-Mg contribute to the good ductility of the as-extruded Mg-10Zn-3Y-3Gd-0.5Zr alloy. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
26. Low cycle fatigue behaviors of pure Mo and Mo-La2O3 alloys.
- Author
-
Cheng, P.M., Zhang, Z.J., Zhang, G.J., Zhang, J.Y., Wu, K., Liu, G., Fu, W., and Sun, J.
- Subjects
- *
METAL fatigue , *MOLYBDENUM alloys , *STRENGTH of materials , *POWDER metallurgy , *MIXING , *TENSILE strength - Abstract
Pure molybdenum (PM) and La 2 O 3 dispersion strengthened Mo alloy (ODS-Mo) were prepared by powder metallurgy through two different mixing method (solid-solid or SS mixing and solid-liquid or SL mixing). After annealed at 1050 °C for 1 h, the PM, SS-Mo and SL-Mo were compared in microstructure and mechanical properties. The microstructural examinations showed that the PM was mostly recrystallized with rather coarse grains, but the ODS-Mo alloys remained fine elongated grains. This discrepancy is due to a higher recrystallization temperature held in the ODS-Mo alloys. The uniaxial testing results showed that the ODS-Mo had higher tensile mechanical properties compared to the PM, which are attributed to the remarkable strengthening and ductilizing effect induced by the La 2 O 3 particles. The low cycle fatigue (LCF) testing results revealed that the PM experienced cyclic hardening behaviors, while the ODS-Mo alloys exhibited cyclic softening behaviors. The Basquin-Manson-Coffin analyses results demonstrated that the ODS-Mo possessed a higher fatigue ductility and longer fatigue life than the PM. Two kinds of cracks, i.e., cleavage cracks and intergranular cracks, were experimentally observed to coexist on the fracture surface. In particular in the SL-Mo alloy, the two crack interacted and propagated forward until final fracture, leading to a step-like crack growth path and concomitantly enhanced fatigue ductility. In addition, different cycling dislocation structures were revealed between the PM and ODS-Mo alloys. Cycle fatigue mechanisms responsible for the fatigue behaviors and microstructure evolution during LCF testing were discussed. The best LCF resistance combined with superior uniaxial tensile mechanical properties found in the SL-Mo alloy were rationalized. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
27. Influence of SiC nanoparticles addition on the microstructural evolution and mechanical properties of AZ91 alloy during isothermal multidirectional forging.
- Author
-
Nie, K.B., Deng, K.K., Wang, X.J., Wang, T., and Wu, K.
- Subjects
- *
SILICON carbide , *MICROSTRUCTURE , *MECHANICAL behavior of materials , *MAGNESIUM alloys , *VIBRATION (Mechanics) - Abstract
In this study, low volume fraction SiCp/AZ91 magnesium matrix nanocomposites billets intended for structural applications were synthesized using semisolid stirring assisted ultrasonic vibration, leading to the dispersion of SiC nanoparticles. Both the AZ91 alloy and nanocomposite billets were then subjected to isothermal multidirectional forging (IMDF). Micrographic observations illustrated that the mean grain size of the developed nanocomposite showed an initial increase after 3 IMDF passes, followed by a decrease after 6 IMDF passes compared to the AZ91 alloy. This indicated that the effect of dispersed SiC nanoparticles on the inhibition of the dynamic recrystallization grains growth was impaired due to the present high IMDF temperature. The improved yield strength of the nanocomposite could be attributed to Orowan strengthening effect related to the dispersed SiC nanoparticles as well as the second phases precipitated far from the dynamic recrystallization grains. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
28. Microstructure and mechanical properties of WE43 magnesium alloy fabricated by direct-chill casting.
- Author
-
Jiang, H.S., Zheng, M.Y., Qiao, X.G., Wu, K., Peng, Q.Y., Yang, S.H., Yuan, Y.H., and Luo, J.H.
- Subjects
- *
MAGNESIUM alloys , *INGOTS , *METAL microstructure , *MECHANICAL properties of metals , *METAL castings , *GRAIN size - Abstract
High quality WE43 magnesium alloy ingots with diameter of 500 mm are successfully fabricated by direct-chill (DC) casting. The alloying elements distributed almost homogeneously across the large ingot. With the average grain size decreasing from the center to the edge of the ingot, the mechanical properties are improved gradually. After solution treatment at 525 °C for 8 h, the Mg 14 Nd 2 Y phases distributing along the grain boundaries are well dissolved into matrix. The direct-chill (DC) casting ingot exhibits remarkable age-hardening response from 85 Hv to 117 Hv after T6 treatment at 250 °C. The T6 peak-aged sample exhibits ultimate tensile strength of 274 MPa, yield strength of 215 MPa and elongation to failure of 3.4%, which are higher than those of sand-cast and permanent mold cast WE43 alloys. The large amount of nano prismatic β ′ and β 1 phases precipitated during T6 treatment contribute to improved strength of the WE43 alloy. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
29. Effect of Ca/Al ratio on microstructure and mechanical properties of Mg-Al-Ca-Mn alloys.
- Author
-
Li, Z.T., Zhang, X.D., Zheng, M.Y., Qiao, X.G., Wu, K., Xu, C., and Kamado, S.
- Subjects
- *
MAGNESIUM alloys , *CALCIUM , *MECHANICAL properties of metals , *METAL microstructure , *METAL extrusion , *STRENGTH of materials - Abstract
The effect of Ca/Al ratio on microstructure and mechanical properties of the as-cast and as-extruded Mg-Al-Ca-Mn alloys were investigated. The as-cast Mg-Al-Ca-Mn alloys with Ca/Al mass ratios less than 0.50 contain divorced and lamellar eutectic (Mg,Al) 2 Ca. When Ca/Al ratio is greater than 0.90, fine lamellar Mg 2 Ca phase is formed in the as-cast Mg-Al-Ca-Mn alloys. After extrusion, the second phases are broken and dispersed along the extrusion direction. The area fraction of DRXed regions decrease with increasing Ca/Al ratio, the microstructure changes from an almost fully recrystallized structure to a bimodal structure consisting of fine dynamically recrystallized (DRXed) grains and coarse deformed regions. With increasing Ca/Al ratio, the DRXed grains and dispersed second phases are refined. The as-extruded alloys exhibit a strong basal fiber texture, the intensity of which is increased with increasing Ca/Al ratio. With increasing Ca/Al ratio, the {0002}<11-20> texture component in the DRXed regions is suppressed, and shifted to a {0002}<10-10> texture component. The strength of the as-extruded Mg-Al-Ca-Mn alloys increases significantly with increasing Ca/Al ratio. The as-extruded Mg-2.7Al-3.5Ca-0.4Mn (wt%) alloy exhibits a tensile proof strength of 438 MPa and an ultimate tensile strength of 457 MPa. The extraordinary high strengths are attributed to the ultrafine DRXed grains pinned by fragmented secondary phases, strong basal texture and dense nano-scale precipitates. The present research indicates that the Mg-Al-Ca-Mn alloys have a great potential as next generation low-cost ultrahigh-strength wrought Mg alloys. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
30. Size-dependent microstructural evolution and mechanical properties of crystalline/amorphous high-entropy alloy nanostructured multilayers: Cu/FeCoCrNiBSi vs Ni/FeCoCrNiBSi.
- Author
-
Zhao, Y.F., Chen, B., Wang, Y.Q., Zhang, J.Y., Li, S.Z., Wu, K., Liu, G., and Sun, J.
- Subjects
- *
AMORPHOUS alloys , *COPPER , *MULTILAYERS , *MAGNETRON sputtering , *DEVITRIFICATION , *PSEUDOPLASTIC fluids - Abstract
Magnetron sputtering technique was employed to synthesize crystalline/amorphous high-entropy alloy (AHEA) X/AHEA (X = Cu and Ni, AHEA = Fe 20 Co 20 Cr 20 Ni 20 B 10 Si 10) nanostructured multilayers (CANMs) with equal layer thickness h ranging from 5 to 150 nm, aiming at systematically investigating their plastic deformation and microstructural evolution. Unlike traditional crystalline/crystalline multilayers often with shear banding at small h , the present X/AHEA CANMs exhibit h -independent homogeneous deformation via the thinning of both constituent layers, while associated with h -dependent deformation-induced devitrification in AHEA layers with thickness below 25 nm. This homogeneous plasticity of AHEA layers with the large incubation size for mature shear bands can be ascribed to the coupling between dislocations in X layers and shear transformation zones in AHEA layers. Meanwhile, the absorption of abundant dislocations emitted from X layers by AHEA layers with small thickness facilitates the occurrence of devitrification behavior, implying the microstructural instability under strong constraint conditions. Moreover, both of Cu/AHEA and Ni/AHEA CANMs manifest size-dependent hardness with the fashion that "smaller is stronger", which is captured well by the rule-of-mixture, based on the size-dependent strength of X nanolayers and size-independent homogenous flow of AHEA nanolayers. [Display omitted] [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
31. Characteristics and mechanical properties of magnesium matrix composites reinforced with micron/submicron/nano SiC particles.
- Author
-
Shen, M.J., Wang, X.J., Ying, T., Wu, K., and Song, W.J.
- Subjects
- *
MAGNESIUM compounds , *MECHANICAL properties of metals , *METALLIC composites , *SILICON carbide , *PARTICLE size distribution , *MICROFABRICATION - Abstract
The (micron[m]+submicron[s]+nano[n]) SiC particles (SiCp) reinforced AZ31B magnesium matrix composites (AZ31B/SiCp/m + s + n composites) were fabricated by stirring casting technology followed by hot extrusion. This method has successfully solved the homodisperse problem of SiCp/m + s + n in the magnesium matrix composites. The influence of SiCp/m + s + n on the dynamic recrystallization (DRX) behavior of the magnesium matrix was investigated by researching the TEM microstructures of composites. The results indicated that the addition of SiCp/m + s + n was helpful to increase the ratio of DRXed nucleation and reduce the average grain size of matrix. The particle deformation zone (PDZ) can be formed in the vicinity of micron SiCp, while the region with high dislocation density can be created around submicron SiCp owing to pin dislocation and deformation mismatch between matrix and particles. These regions are ideal sites for the formation of recrystallization nucleus. Meanwhile, the addition of fine SiCp(nano and submicron) may delay or hinder the growth of matrix grain through the pinning effect on the grain boundaries during hot extrusion. The tensile test indicates that the strength of the AZ31B/SiCp/m + s + n composites has a significant improvement. Compared with the single sized or bimodal sized particles reinforced magnesium matrix composites, the tensile strength of the AZ31B/SiCp/m + s + n composites were highlighted. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
32. Ultrahigh strength as-extruded Mg–10.3Zn–6.4Y–0.4Zr–0.5Ca alloy containing W phase.
- Author
-
Jiang, H.S., Qiao, X.G., Xu, C., Zheng, M.Y., Wu, K., and Kamado, S.
- Subjects
- *
MAGNESIUM alloys , *METAL extrusion , *TUNGSTEN , *METAL castings , *TENSILE strength , *YIELD stress , *CRYSTAL grain boundaries - Abstract
A new ultrahigh-strength W phase (Mg 3 Y 2 Zn 3 ) containing Mg–10.3Zn–6.4Y–0.4Zr–0.5Ca (wt.%) alloy with medium RE content has been fabricated through conventional casting and indirect extrusion. The as-extruded alloy exhibits ultimate tensile strength of 466 MPa, tensile yield stress of 447 MPa and elongation to failure of 4.7%. The as-cast Mg–10.3Zn–6.4Y–0.4Zr–0.5Ca (wt.%) alloy is mainly composed of α-Mg and lamellar eutectic α-Mg and W phase distributed at grain boundaries. After extrusion, the coarse lamellar W phases in the as-cast alloy are broken into fine particles of about 0.5 μm, dispersing in the particle bands along the extrusion direction. The as-extruded alloy exhibits a bimodal microstructure consisting of ultrafine dynamic recrystallized (DRXed) grains with fine broken W phase particles at the DRXed grain boundaries and coarse un-DRXed regions. Large number of nano W phase and small amount of nano β 2 ′ phase are dynamically precipitated in the coarse unDRXed regions during extrusion, which contribute to the ultrahigh strength of the as-extruded alloy. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
33. Effect of microalloying with Ca on the microstructure and mechanical properties of Mg-6 mass%Zn alloys.
- Author
-
Du, Y.Z., Qiao, X.G., Zheng, M.Y., Wang, D.B., Wu, K., and Golovin, I.S.
- Subjects
- *
ZINC alloys , *MICROALLOYING , *METAL microstructure , *MECHANICAL properties of metals , *PHASE transitions , *METAL castings - Abstract
The Mg-6 mass%Zn alloys microalloyed with different amounts of Ca were cast and extruded. The second phase in the as-cast Mg-6Zn alloy is Mg 4 Zn 7 , which is replaced by Ca 2 Mg 6 Zn 3 with an increase of Ca addition. Microalloying by Ca affects the grain size, dynamic recrystallization, and dynamic precipitation of Mg-6Zn alloys during extrusion. The Ca addition inhibits dynamic recrystallization and grain growth due to the pinning effect of fine precipitates, giving rise to fine dynamic recrystallized grains. A large amount of precipitates is observed in the Ca containing alloys after extrusion. Ca effectively improves strength of the as-extruded Mg-6Zn alloy, which is mainly attributed to refined dynamic recrystallized grains, dense precipitates, and deformed regions with high-density dislocations and strong basal texture. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
34. Significantly improved strength and ductility in bimodal-size grained microstructural magnesium matrix composites reinforced by bimodal sized SiCp over traditional magnesium matrix composites.
- Author
-
Shen, M.J., Wang, X.J., Zhang, M.F., Zheng, M.Y., and Wu, K.
- Subjects
- *
COMPOSITE materials , *DUCTILITY , *GRAIN size , *MICROSTRUCTURE , *MAGNESIUM , *MATERIAL plasticity - Abstract
High strong magnesium matrix composites can be obtained by refining grain size, heat treatment and severe plastic deformation methods. However, most of the composite enhancing approaches result in the disappointingly poor tensile ductility. Thus, the designing and fabricating of composites with simultaneously good ductility and high strength have become burning issues for the application of light metals/alloys. Simply adding particles or changing particle parameters can not solve the problem of combination of high strength and good ductility. A new method has been developed, wherein the bimodal size grained microstructure formed by adding the bimodal sized SiC particles (SiCp) was selected as favorable microstructure for achieving good ductility and high strength in present work. The fine grains (grain size: <1 μm) were obtained through the particle stimulate of nucleation (PSN) and pin grain boundary effect. However, the coarse grains (grain size: ∼4 μm) were obtained through forming SiCp free zones in the present magnesium matrix composites. The tensile test indicates a significant improvement in the ductility (∼8.3%) and strength (UTS: ∼402 MPa, YS: ∼323 MPa) of the composites. Compared with the conventional single-sized particles (micron or nano) reinforced magnesium matrix composites, the tensile ductility and strength of present composite (AZ31B/SiCp/1n + 9m composite) were highlighted in the current literature. [ABSTRACT FROM AUTHOR]
- Published
- 2015
- Full Text
- View/download PDF
35. Microstructures and mechanical properties of SiCp/AZ91 magnesium matrix nanocomposites processed by multidirectional forging.
- Author
-
Nie, K.B., Deng, K.K., Wang, X.J., Gan, W.M., Xu, F.J., Wu, K., and Zheng, M.Y.
- Subjects
- *
MAGNESIUM alloys , *METAL microstructure , *MECHANICAL properties of metals , *SILICON compounds , *NANOCOMPOSITE materials , *FORGING - Abstract
A particulate reinforced magnesium matrix nanocomposite was subjected to multidirectional forging (MDF). The results showed that the microstructure of the nanocomposite mainly consisted of some large initial grains and fine recrystallized grains along initial grain boundaries after 1 MDF pass. With increasing the MDF passes, the degree of dynamic recrystallization increased and ultrafine grains with average size of about 20 nm were observed in the nanocomposites after 6 MDF passes. The distribution of SiC nanoparticles in the nanocomposite was homogeneous outside some SiC nanoparticle dense zones after different MDF passes. Compared with typical basal texture obtained for 1 MDF pass, the basal pole intensity decreased firstly for 3 MDF pass and then increased for 6 MDF passes. Both ultimate tensile strength and elongation to fracture of the nanocomposite were enhanced with increasing the MDF passes, while yield strength decreased after 3 MDF passes and then increased slightly after 6 MDF passes. [ABSTRACT FROM AUTHOR]
- Published
- 2015
- Full Text
- View/download PDF
36. Multidirectional forging of AZ91 magnesium alloy and its effects on microstructures and mechanical properties.
- Author
-
Nie, K.B., Deng, K.K., Wang, X.J., Xu, F.J., Wu, K., and Zheng, M.Y.
- Subjects
- *
FORGING , *MAGNESIUM alloys , *MECHANICAL behavior of materials , *RECRYSTALLIZATION (Metallurgy) , *CRYSTAL grain boundaries - Abstract
AZ91 alloy was subjected to multidirectional forging (MDF) and the relationship between microstructures and mechanical properties generated by MDF were investigated. The results showed that after 1 MDF pass grain size of the alloy decreased compared with as-cast alloy, and the amount of recrystallization grains increased when the MDF temperature increased from 250 °C to 400 °C. With increasing the MDF passes at 350 °C, grains of the alloy were gradually refined. A typical basal texture was obtained after 1 MDF pass, and then the basal pole scattered with the increase of MDF passes. Mg 17 Al 12 phases were precipitated along grain boundaries during MDF, which could hinder the growth of recrystallization grains. Both tensile strength and elongation to failure of the alloy were significantly enhanced till 3 MDF passes with increasing the MDF passes. [ABSTRACT FROM AUTHOR]
- Published
- 2015
- Full Text
- View/download PDF
37. Microstructures and mechanical properties of AZ91 magnesium alloy processed by multidirectional forging under decreasing temperature conditions.
- Author
-
Nie, K.B., Wang, X.J., Deng, K.K., Xu, F.J., Wu, K., and Zheng, M.Y.
- Subjects
- *
MAGNESIUM alloys , *MICROSTRUCTURE , *MECHANICAL behavior of materials , *PRECIPITATION (Chemistry) , *CRYSTAL grain boundaries , *TENSILE strength , *GRAIN refinement - Abstract
The present study dealt with the AZ91 alloy subjected to multidirectional forging (MDF) under decreasing temperature conditions with emphasizing on relationship between microstructures and mechanical properties generated by MDF. The obtained results showed that grains of the alloy were gradually refined while the amount of the second phase precipitated along the grain boundaries was increased with increasing the MDF passes and decreasing the MDF temperature. Compared with the as-cast alloy, yield strength, ultimate tensile strength and elongation of the AZ91 alloy after MDF under decreasing temperature conditions were simultaneously increased. As the numbers of MDF passes were gradually increased and the MDF temperature was gradually decreased, the yield strength was gradually decreased, suggesting that texture softening may overwhelm the strengthening due to the grain refinement as well as the homogeneous distribution of precipitates. [ABSTRACT FROM AUTHOR]
- Published
- 2014
- Full Text
- View/download PDF
38. Microstructural evolution, mechanical properties and deformation mechanisms of nanocrystalline Cu thin films alloyed with Zr.
- Author
-
Zhang, P., Zhang, J. Y., Li, J., Liu, G., Wu, K., Wang, Y. Q., and Sun, J.
- Subjects
- *
MICROSTRUCTURE , *MECHANICAL behavior of materials , *DEFORMATIONS (Mechanics) , *NANOCRYSTALS , *THIN films , *COPPER-zirconium alloys , *HARDNESS - Abstract
The hardness, tensile ductility and fatigue lifetime of nanostructured (NC) Cu-Zr alloyed thin films have been systematically measured at different Zr additions (0, 0.5, 2.0, 4.0, 8.0at.%). Experimental results showed that the Cu-0.5at.% Zr film exhibited the highest hardness, largest ductility and longest fatigue lifetime, which are increased by 120%, 80%, and above an order of magnitude, respectively, in comparison with its pure Cu counterpart. The simultaneous improvements of mechanical properties are rationalized with respect to microstructural evolutions related to Zr segregation at grain boundaries (GBs). Besides refinement in NC grains and enhancement in nanotwins, grain orientation was apparently modified by the GB Zr segregation. (110) grains were promoted and layer-like microstructure was formed with coexistence of three orientation of grains at the upper layer, facilitating Cu grain growth at room temperature. GB doping strengthening worked as an additional strengthening mechanism and mechanically driven grain growth became the predominant deformation mechanism and fatigue mechanism, which accounted for the optimal combination of mechanical properties achieved in the Cu-0.5at.% Zr film. When the Zr content was >2.0at.%, however, amorphous phases were formed at the GBs due to locally increased Zr concentration. The GB doping strengthening effect was concomitantly weakened and strength was gradually decreased. In addition, stress/strain localization occurred readily at the amorphous phase regions, triggering intergranular fracture and reducing ductility. During cyclic testing in the low stress range, GB amorphous phases strengthened rather impaired the GBs, which gave the Cu-Zr films a fatigue lifetime greater than that of the pure NC Cu film. The present results clearly indicate that, once solute content is suitably explored, the solute segregation at GBs in NC metals can not only retain NC grains in loading-free conditions, but also impart enhanced mechanical properties when exposed to applied stress. [ABSTRACT FROM AUTHOR]
- Published
- 2014
- Full Text
- View/download PDF
39. Effect of solidification on microstructures and mechanical properties of carbon nanotubes reinforced magnesium matrix composite.
- Author
-
Li, C.D., Wang, X.J., Liu, W.Q., Shi, H.L., Ding, C., Hu, X.S., Zheng, M.Y., and Wu, K.
- Subjects
- *
MICROSTRUCTURE , *CARBON nanotubes , *MAGNESIUM , *MECHANICAL behavior of materials , *COMPOSITE materials , *SOLIDIFICATION - Abstract
Highlights: [•] The solidification rates significantly affect the CNTs distribution. [•] Uniform CNTs distribution was achieved in the composites. [•] The tensile properties of the composites follow the Kelly–Tyson formula well. [Copyright &y& Elsevier]
- Published
- 2014
- Full Text
- View/download PDF
40. Processing, microstructure and mechanical properties of micro-SiC particles reinforced magnesium matrix composites fabricated by stir casting assisted by ultrasonic treatment processing.
- Author
-
Wang, X.J., Wang, N.Z., Wang, L.Y., Hu, X.S., Wu, K., Wang, Y.Q., and Huang, Y.D.
- Subjects
- *
MAGNESIUM alloys , *SILICON carbide , *METAL microstructure , *MECHANICAL properties of metals , *MICROFABRICATION , *METAL castings , *HEAT treatment of metals - Abstract
Highlights: [•] Novel stir casting assisted by ultrasonic treatment was developed. [•] Ultrasonic treatment significantly improved the stir casting. [•] Ultrasonic treatment improved the mechanical properties. [Copyright &y& Elsevier]
- Published
- 2014
- Full Text
- View/download PDF
41. Fabrication of bimodal size SiCp reinforced AZ31B magnesium matrix composites.
- Author
-
Shen, M.J., Wang, X.J., Zhang, M.F., Hu, X.S., Zheng, M.Y., and Wu, K.
- Subjects
- *
FABRICATION (Manufacturing) , *COMPOSITE materials , *NANOPARTICLES , *MAGNESIUM , *TENSILE strength - Abstract
Abstract: Bimodal sized (Micro-particles: m and Nano-particles: n) SiC particulates (SiCp) reinforced magnesium matrix composites with different volume fractions of micro-particles (1n+4p, 1n+9p and 1n+14p) were prepared by a semisolid stirring assisted ultrasonic vibration method. Both the as-cast SiCp/AZ31B composites and the AZ31B alloy were extruded at 350°C with the extrusion ratio of 12:1 at a constant ram speed of 15mm/s. The microstructure investigation was carried out by optical microscope (OM), scanning electron microscope (SEM) and transmission electron microscopy (TEM). The results show that the distribution of bimodal size SiCp and the mechanical properties of the AZ31B alloy were significantly improved after hot extrusion. When the volume fraction of nano SiCp is 1vol%, both the yield strength and ultimate tensile strength of the AZ31B/SiC/1n+14p composite are stronger than that of the AZ31B/SiC/1n+4p and AZ31B/SiC/1n+9p composites, while the elongation to fracture was decreased comparing with the AZ31B/SiC/1n+4p and AZ31B/SiC/1n+9p composites. [Copyright &y& Elsevier]
- Published
- 2014
- Full Text
- View/download PDF
42. Microstructure and strengthening mechanism of carbon nanotubes reinforced magnesium matrix composite.
- Author
-
Li, C.D., Wang, X.J., Liu, W.Q., Wu, K., Shi, H.L., Ding, C., Hu, X.S., and Zheng, M.Y.
- Subjects
- *
METAL microstructure , *STRENGTH of materials , *CARBON nanotubes , *MAGNESIUM compounds , *METALLIC composites , *MECHANICAL properties of metals , *METAL extrusion - Abstract
Abstract: Carbon nanotube (CNTs) reinforced Mg matrix composites were successfully fabricated by a novel approach. After hot extrusion, the influence of CNTs on microstructure and mechanical properties of Mg–6Zn matrix was investigated. The results showed that most CNTs distributed uniformly and individually in the composites, and good interfacial bonding was achieved. CNTs significantly refined the grains of Mg–6Zn matrix, and the CNTs evidently improved the ultimate tensile strength (UTS), yield strength (YS) and Young's modulus. Grain refinement, load transfer mechanism and Orowan strengthening mechanism play important roles on the increase of the yield strength. [Copyright &y& Elsevier]
- Published
- 2014
- Full Text
- View/download PDF
43. Effect of submicron size SiC particles on microstructure and mechanical properties of AZ31B magnesium matrix composites.
- Author
-
Shen, M.J., Wang, X.J., Li, C.D., Zhang, M.F., Hu, X.S., Zheng, M.Y., and Wu, K.
- Subjects
- *
SILICON carbide , *METAL microstructure , *MECHANICAL properties of metals , *MAGNESIUM , *COMPOSITE materials , *MICROFABRICATION - Abstract
Highlights: [•] Submicron-SiCp/AZ31B composites were fabricated.. [•] The influence of submicron SiCp for matrix alloy was determined. [•] Mechanical properties of submicron SiCp/AZ31B composite were enhanced significantly. [Copyright &y& Elsevier]
- Published
- 2014
- Full Text
- View/download PDF
44. Formation of long-period stacking ordered phase only within grains in Mg–Gd–Y–Zn–Zr casting by friction stir processing.
- Author
-
Yang, Q., Xiao, B.L., Wang, D., Zheng, M.Y., Wu, K., and Ma, Z.Y.
- Subjects
- *
STACKING interactions , *PHASE transitions , *CRYSTAL grain boundaries , *FRICTION stir processing , *MAGNESIUM alloys , *METAL castings , *MECHANICAL properties of metals - Abstract
Highlights: [•] Friction stir processing (FSP) was applied to Mg–Gd–Y–Zn–Zr casting. [•] The grain boundary Mg3RE and LPSO phases in the casting dissolved after FSP. [•] Fine grains with LPSO phase distributed only within the grains was achieved. [•] High mechanical properties were obtained in FSP Mg–Gd–Y–Zn–Zr. [ABSTRACT FROM AUTHOR]
- Published
- 2013
- Full Text
- View/download PDF
45. Effect of bimodal size SiC particulates on microstructure and mechanical properties of AZ31B magnesium matrix composites.
- Author
-
Shen, M.J., Wang, X.J., Li, C.D., Zhang, M.F., Hu, X.S., Zheng, M.Y., and Wu, K.
- Subjects
- *
SILICON carbide , *MECHANICAL behavior of materials , *MICROSTRUCTURE , *MAGNESIUM alloys , *COMPOSITE materials , *FABRICATION (Manufacturing) - Abstract
Highlights: [•] Bimodal size SiCp/AZ31B composites were fabricated. [•] The influence of bimodal size SiCp for matrix alloy was determined. [•] Mechanical properties of bimodal size SiCp/AZ31B composite were enhanced significantly. [ABSTRACT FROM AUTHOR]
- Published
- 2013
- Full Text
- View/download PDF
46. The effect of double extrusion on the microstructure and mechanical properties of Mg–Zn–Ca alloy.
- Author
-
Du, Y.Z., Zheng, M.Y., Qiao, X.G., Wu, K., Liu, X.D., Wang, G.J., Lv, X.Y., Li, M.J., Liu, X.L., Wang, Z.J., and Liu, Y.T.
- Subjects
- *
MICROSTRUCTURE , *EXTRUSION process , *MECHANICAL behavior of materials , *MAGNESIUM alloys , *PARTICLE size distribution , *TEMPERATURE effect - Abstract
The Mg–4.50Zn–1.13Ca (wt%) alloy was subjected to double extrusion, and the microstructure and mechanical properties of the extruded alloys were investigated. Double extrusion refined the microstructure significantly, resulting in the enhancement of mechanical properties of the double-extruded alloys compared with the single-extruded alloy. The yield strength of the single-extruded alloy was 173MPa, while the value was increased to 320MPa and 370MPa after subsequent second extrusion at 300°C and 250°C, respectively. The second extrusion ratio had little effect on the microstructure and mechanical properties of the double-extruded alloys, while grain size was decreased and strength was increased with the decrease of double extrusion temperature. The double-extruded Mg–Zn–Ca alloy exhibited superior elevated temperature mechanical properties, which was attributed to the fine stable Ca2Mg6Zn3 intermetallic compound particles dispersed in the alloy. [ABSTRACT FROM AUTHOR]
- Published
- 2013
- Full Text
- View/download PDF
47. Microstructure and mechanical properties of Mg–Zn–Ca–Ce alloy processed by semi-continuous casting.
- Author
-
Du, Y.Z., Zheng, M.Y., Qiao, X.G., Wu, K., Liu, X.D., Wang, G.J., and Lv, X.Y.
- Subjects
- *
MAGNESIUM alloys , *MICROSTRUCTURE , *MECHANICAL properties of metals , *METAL castings , *PHASE transitions , *STRENGTH of materials - Abstract
Abstract: The microstructures and mechanical properties of Mg–5.3Zn–0.2Ca–0.5Ce (wt%) alloy fabricated by semi-continuous casting were investigated. The as-cast alloy consists of α-Mg, Ca2Mg6Zn3 and T′1 phase with orthorhombic structure (a=0.57nm, b=0.75nm and c=1.00nm). T′1 phase mainly distributes at the triple conjunctions while the Ca2Mg6Zn3 at the grain boundaries. The as-cast alloy exhibits high strength retention due to the stable Ca2Mg6Zn3 and T′1 phase at the grain boundaries. [Copyright &y& Elsevier]
- Published
- 2013
- Full Text
- View/download PDF
48. Microstructures and mechanical properties of as-cast and as-extruded Mg-4.50Zn-1.13Ca (wt%) alloys.
- Author
-
Du, Y.Z., Zheng, M.Y., Xu, C., Qiao, X.G., Wu, K., Liu, X.D., Wang, G.J., and Lv, X.Y.
- Subjects
- *
MAGNESIUM alloys , *METAL microstructure , *MECHANICAL properties of metals , *MICROFABRICATION , *CRYSTAL grain boundaries , *CRYSTAL texture , *METALS , *METAL castings - Abstract
Abstract: A large Mg-4.50Zn-1.13Ca (wt%) alloy ingot 350mm in diameter and 1730mm long was successfully fabricated by semi-continuous casting. The microstructures and mechanical properties of the as-cast and as-extruded alloys were investigated. The as-cast alloy exhibits uniform chemical composition and microstructure from the centre to the surface of the ingot and mainly consists of α-Mg and Ca2Mg6Zn3. The coarse grains and network-like second phases that are distributed at the grain boundaries result in poor mechanical properties for the as-cast alloy. The mechanical properties of the as-extruded alloys are significantly enhanced. The high yield strengths of the as-extruded alloys mainly result from the fine DRXed grain and the stronger basal texture. [Copyright &y& Elsevier]
- Published
- 2013
- Full Text
- View/download PDF
49. Effect of ageing treatment on the microstructure, texture and mechanical properties of extruded Mg–8.2Gd–3.8Y–1Zn–0.4Zr (wt%) alloy
- Author
-
Chi, Y.Q., Zheng, M.Y., Xu, C., Du, Y.Z., Qiao, X.G., Wu, K., Liu, X.D., Wang, G.J., and Lv, X.Y.
- Subjects
- *
MAGNESIUM compounds , *MECHANICAL properties of metals , *METAL microstructure , *EFFECT of temperature on metals , *CRYSTAL texture , *METALS , *RECRYSTALLIZATION (Metallurgy) , *EXTRUSION process - Abstract
Abstract: Extruded Mg–8.2Gd–3.8Y–1Zn–0.4Zr (wt%) alloy was subjected to ageing treatment at 200°C. The microstructures, textures and mechanical properties of the as-extruded and peak-aged alloys were investigated. Recrystallization occurred during ageing treatment. A large number of β′ phases were observed in the peak-aged alloy, accompanied with the decrease of the volume fraction of LPSO phases. A basal fiber texture and an unusual texture component with basal planes perpendicular to the extrusion direction were found in the as-extruded alloy, and the basal fiber texture was strengthened after ageing treatment. The peak-aged alloy exhibited a tensile yield strength (TYS), an ultimate tensile strength (UTS) and an elongation to failure of 395MPa, 470MPa and 8%, respectively, at ambient temperature, and 271MPa, 311MPa and 19%, respectively, at 300°C. The superior strength of the peak-aged alloy was mainly attributed to the precipitation of fine β′ phases, the remaining LPSO phases and the texture modification. [Copyright &y& Elsevier]
- Published
- 2013
- Full Text
- View/download PDF
50. Dynamic recrystallization behavior during hot deformation and mechanical properties of 0.2μm SiCp reinforced Mg matrix composite
- Author
-
Deng, K.K., Wang, X.J., Zheng, M.Y., and Wu, K.
- Subjects
- *
MAGNESIUM alloys , *RECRYSTALLIZATION (Metallurgy) , *DEFORMATIONS (Mechanics) , *MECHANICAL properties of metals , *METALLIC composites , *FLUX pinning - Abstract
Abstract: In this paper, 0.2μm SiCp/AZ91 composite was fabricated by stir casting technology. The influence of fine (<1μm) particles on the dynamic recrystallization (DRX) behavior of AZ91 matrix was investigated by researching the microstructure evolution of 0.2μm 1vol% SiCp/AZ91 composite during the hot extrusion process. Results showed that the DRXed ratio of AZ91 matrix increased as well as the average size of DRXed grains reduced due to the addition of fine particles. The SiCp could not only pin dislocation, but also was helpful to generate dislocations owing to the deformation mismatch between matrix and particles, thus causing the increase of dislocation density around SiCp, which was benefit to stimulate DRX nucleation. Meanwhile, the growth of DRXed grains was suppressed in the following deformation process due to the pinning effect of fine particles on grain boundaries. Thus, the fine particles had significant effect on stimulating DRXed nucleation and refining grain size. The yield strength and ultimate tensile strength of the as-deformed 0.2μm 1vol% SiCp/AZ91 composite are 275 and 335MPa, respectively, which are mainly attributed to the grain refinement, basal plane texture and uniform particle distribution induced by hot deformation. [Copyright &y& Elsevier]
- Published
- 2013
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.