Low cycle fatigue behaviors of pure Mo and Mo-La2O3 alloys.

Pure molybdenum (PM) and La 2 O 3 dispersion strengthened Mo alloy (ODS-Mo) were prepared by powder metallurgy through two different mixing method (solid-solid or SS mixing and solid-liquid or SL mixing). After annealed at 1050 °C for 1 h, the PM, SS-Mo and SL-Mo were compared in microstructure and mechanical properties. The microstructural examinations showed that the PM was mostly recrystallized with rather coarse grains, but the ODS-Mo alloys remained fine elongated grains. This discrepancy is due to a higher recrystallization temperature held in the ODS-Mo alloys. The uniaxial testing results showed that the ODS-Mo had higher tensile mechanical properties compared to the PM, which are attributed to the remarkable strengthening and ductilizing effect induced by the La 2 O 3 particles. The low cycle fatigue (LCF) testing results revealed that the PM experienced cyclic hardening behaviors, while the ODS-Mo alloys exhibited cyclic softening behaviors. The Basquin-Manson-Coffin analyses results demonstrated that the ODS-Mo possessed a higher fatigue ductility and longer fatigue life than the PM. Two kinds of cracks, i.e., cleavage cracks and intergranular cracks, were experimentally observed to coexist on the fracture surface. In particular in the SL-Mo alloy, the two crack interacted and propagated forward until final fracture, leading to a step-like crack growth path and concomitantly enhanced fatigue ductility. In addition, different cycling dislocation structures were revealed between the PM and ODS-Mo alloys. Cycle fatigue mechanisms responsible for the fatigue behaviors and microstructure evolution during LCF testing were discussed. The best LCF resistance combined with superior uniaxial tensile mechanical properties found in the SL-Mo alloy were rationalized. [ABSTRACT FROM AUTHOR]