Search

The toxicity of the most efficient fire retardant additives is a major problem for polymeric materials. Cellulose nanofiber (CNF)/clay nanocomposites, with unique brick-and-mortar structure and prepared by simple filtration, are characterized from the morphological point of view by scanning electron microscopy and X-ray diffraction. These nanocomposites have superior fire protection properties to other clay nanocomposites and fiber composites. The corresponding mechanisms are evaluated in terms of flammability (reaction to a flame) and cone calorimetry (exposure to heat flux). These two tests provide a wide spectrum characterization of fire protection properties in CNF/montmorrilonite (MTM) materials. The morphology of the collected residues after flammability testing is investigated. In addition, thermal and thermo-oxidative stability are evaluated by thermogravimetric analyses performed in inert (nitrogen) and oxidative (air) atmospheres. Physical and chemical mechanisms are identified and related to the unique nanostructure and its low thermal conductivity, high gas barrier properties and CNF/MTM interactions for char formation.

The present study was carried out to evaluate the impact of the effluents and the solid wastes generated by a giant pulp and paper mill in the northeastern part of India on soil mineralogy of the area. The impacts were monitored by analysis of soil samples from seven sites located in the potential impact zone and a control site where any kind of effluent discharge or solid waste dumping was absent. The soil belonged to medium texture type (sandy clay loam, sandy loam, loamy sand, and silt loam), and the soil aggregate analysis indicated higher levels of organic carbon, pH, electrical conductivity, effective cation exchange capacity, and mean weight diameter at sites receiving effluents and solid wastes from the pulp and paper mill. Depletion in soil silica level and in feldspar and quartz contents and rise in iron and calcium contents at the sites receiving effluents from the pulp and paper mill indicated significant influence on soil mineralogy. The soil contained a mixture of minerals consisting of tectosilicates (with silicate frameworks as in quartz or feldspar), phylosilicates (layered clays like kaolinite, smectite, chlorite, illite, etc.), and carbonates. Absence of pure clay minerals indicated a state of heterogeneous intermediate soil clay transformation. The significance of the mixed mineralogy in relation to the disposal of effluents and dumping of solid wastes is discussed in details.

The stability of biochar carbon (C) is the major determinant of its value for long-term C sequestration in soil. A long-term (5 year) laboratory experiment was conducted under controlled conditions using 11 biochars made from five C3 biomass feedstocks (Eucalyptus saligna wood and leaves, papermill sludge, poultry litter, cow manure) at 400 and/or 550 °C. The biochars were incubated in a vertisol containing organic C from a predominantly C4-vegetation source, and total CO(2)-C and associated δ(13)C were periodically measured. Between 0.5% and 8.9% of the biochar C was mineralized over 5 years. The C in manure-based biochars mineralized faster than that in plant-based biochars, and C in 400 °C biochars mineralized faster than that in corresponding 550 °C biochars. The estimated mean residence time (MRT) of C in biochars varied between 90 and 1600 years. These are conservative estimates because they represent MRT of relatively labile and intermediate-stability biochar C components. Furthermore, biochar C MRT is likely to be higher under field conditions of lower moisture, lower temperatures or nutrient availability constraints. Strong relationships of biochar C stability with the initial proportion of nonaromatic C and degree of aromatic C condensation in biochar support the use of these properties to predict biochar C stability in soil.

Nacre-mimicking hybrids of high inorganic content (>50 wt %) tend to show low strain-to-failure. Therefore, we prepared clay nanopaper hybrid composite montmorillonite platelets in a continuous matrix of nanofibrillated cellulose (NFC) with the aim of harnessing the intrinsic toughness of fibrillar networks. Hydrocolloid mixtures were used in a filtration approach akin to paper processing. The resulting multilayered structure of the nanopaper was studied by FE-SEM, FTIR, and XRD. Uniaxial stress−strain curves measured in tension and thermal analysis were carried out by DMTA and TGA. In addition, fire retardance and oxygen permeability characteristics were measured. The continuous NFC matrix is a new concept and provides unusual ductility to the nanocomposite, allowing inorganic contents as high as 90% by weight. Clay nanopaper extends the property range of cellulose nanopaper and is of interest in self-extinguishing composites and in oxygen barrier layers.

The paper describes results obtained in the development of a previous research. We study here, in fast firing, the sintering behaviour and measure some properties of tiles containing a mixture of 60 wt% of paper mill sludge and 40 wt% of glass cullet. The behaviour of this material is compared to those displayed by materials obtained by the same mixture added with 10, 20 and 30 wt% of a natural red clay. In parallel, the same properties are measured also on a reference blend, which is presently used to produce commercial tiles. We show that powders containing 60 wt% of paper sludge and 40 wt% of glass cullet to which 30 wt% of clay is added give rise to materials that display a stable sintering process and have good hardness and strength and therefore could be used for the industrial production of tiles.

The lack of landfill capacity, forthcoming EU waste disposal and landfill management legislation and the use of non-renewable and energy intensive natural resources for the end-treatment of old landfills increase pressures to develop new landfill management methods. This paper considers a method for the end-management of old landfills in Finland, which is based on the utilization of forest and paper industry waste flows, wastes from paper recycling (de-inking) and wastes from forest industry energy production. Fibre clay wastes from paper mills, de-inking sludges from de-inking of recovered waste paper and incineration ash from forest industry power plants serve to substitute the use of natural clay for the building of landfill structures for closed landfills. Arguably, this method is preferable to existing practices of natural clay use for landfill building, because it (1) substitutes non-renewable natural clay, (2) consumes less energy and generates less CO2 emissions than the use of natural clay, and (3) eliminates considerable amounts of wastes from paper production, paper consumption and from forest industry energy production. Some difficulties in the application of the method are considered and the waste flow utilization is incorporated into a local forest industry recycling network.

The large volumes of wastes generated by industrialised society has led to efforts to find practical uses for these wastes, whilst also offsetting the consumption of natural resources. This paper describes the use of an innovative rotary kiln to produce synthetic aggregates from a variety of waste streams. The main waste used was a quarry fines which was blended with either paper sludge, clay, or a dredged harbour sediment. The different combinations were extruded and fired in the kiln to produce a material suitable for natural aggregate replacement. Two of the synthetic aggregates produced were tested by incorporation in to concrete as coarse aggregate replacement. The concrete 28-day compressive strengths achieved were above 40 N mm-2 and compared favourably with control concretes made with natural aggregates and a commercially available lightweight aggregate (Lytag). Leaching tests have also been carried out to assess the potential environmental impact of utilisation. Although not finalised, these tests have also given favourable results.