Search

This study developed active packaging films of Polylactic acid incorporated with the plant-based essential oils of Trachyspermum ammi, T. ammi and Vanilla to package waffles, where the antimicrobial property was provided by T. ammi and its odor was masked by vanilla essential oil. Compared to conventional solvent-cast films of smaller sizes requiring a huge amount of solvents, bigger-size PLA-oil films with lower solvent demand were prepared by tape casting technique with 10, 30, and 50 wt% essential oil blends. Films were studied for their morphological, chemical, mechanical, barrier, and antimicrobial properties. The presence and time-bound release of volatile oils from the films was confirmed by infrared spectroscopy, with a continuous decrease of oils from the films till day 30. The plasticizing effect of oils in films was evidenced by decreased tensile strength and crystallinity. In contrast, an increase in elongation at break and water vapor permeability of oil films were also measured. Finally, when packed in PLA films containing 50 wt% blend of both oils, waffles shelf-life extended up to 30 days compared to 2 days for the neat PLA film, where Vanilla was found effective in masking the unpleasant odor of T.ammi as confirmed by sensory analysis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

3D multifunctional scaffold has been designed based on Cs/SA/NS/NPHA. Nanoparticles hydroxyapatite (NPHA) was prepared via precipitation method of sodium dihydrogen phosphate in presence calcium chloride. Different ratios of Chitosan (CS)/Sodium Alginate (SA) were used to prepare Cs/SA scaffolds in presence of CaCl 2 as a cross linker. NPHA was incorporated in CS/SA scaffold and neomycin sulfate (NS) was added as an antimicrobial agent. The structure and surface morphology of the scaffolds were investigated via infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and thermal gravimetric analysis (TGA) techniques. Additionally, Antimicrobial activity of the scaffold has evaluated against Gram- negative and Gram- positive bacteria. The result showed promising antimicrobial activity against Bacillus subtilis, Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa and Candida albicans. Furthermore, cytotoxicity against MG63 osteosarcoma cell and fibroblast normal cell line has investigated. The result showed anti-proliferative against MG63. DFT calculations and molecular docking were used to study the reactivity of the compounds. The results exhibited that Cs/SA/NS/NPHA is potent expected to be used in bone tissue regeneration., Competing Interests: Declaration of competing interest The author declares that there is no conflict to interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study, novel Cu-complexes of heterocyclic cellulose which were synthesized via the reaction of carboxymethyl cellulose (CMC) from bagasse pulp with NH 2 NH 2 to give hydrazide cellulose which easily reacted with CS 2 to form salt and then cyclized in the presence of HCl to afford cellulose oxadiazole, or with hydrazine hydrate to give cellulose triazole. Furthermore, the cellulose oxadiazole and triazole moieties acting as chelating agents with metal ion Cu (II), and all synthesized compounds were examined for their spectral analysis to show the adsorption of Cu (II) on the surface of cellulose through intramolecular hydrogen bonding. Results illustrated that cellulose oxadiazole and Cu- cellulose oxadiazole exhibited antimicrobial activities more than triazole and Cu- cellulose triazole. Furthermore, anticancer results showed that both cellulose oxadiazole and triazole exhibited activity higher than Cu-cellulose oxadiazole and Cu-cellulose triazole, where the cellulose triazole showed the highest activity (IC50 = 58.7 μg/μL). Additionally, the docking simulation of the synthesized cellulose complexes with different proteins such as PDBID:3t88, PDBID:4ynt, PDBID:1tgh, PDBID:2wje, and PDBID:4hdq and shortage bond length to confirm the experimental results. Optimization of metal complexes utilized the DFT/B3LYP/LANL2DZ basis set to confirm the stability of these metals theoretically and their physical descriptors and FMO analysis., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Acacia catechu contains polyphenolic compounds such as catechin and tannins, which exhibit antioxidant and antimicrobial properties that have the potential to be used in food packaging applications. In this study, chitosan-based (CH) antioxidant films were developed with the incorporation of calcium carbonate (CC) and Acacia catechu (CT). The films were fabricated by the solvent-casting method, and the effects of the different concentrations of Acacia catechu were analyzed. The physicomechanical, antioxidant, and UV shielding properties of the films were determined. The addition of Acacia catechu and calcium carbonate has significantly increased the tensile from 2.30 MPa to 4.95 MPa, respectively, for neat CH and CH/CC/CT-4 film. At the same time, there is a reduction in the elongation at break from 26.75 % in neat CH film to 12.11 % in CH/CC/CT-4 film. The CH/CC/CT-4 film has shown the highest ferric-reducing antioxidant power (FRAP) of 0.440 mg Trolox/g dried weight of the film and 2,2 diphenyl picrylhydrazyl (DPPH) radical scavenging activity of 93.05 %. The UV transmittance of CH/CC/CT-4 film was 0.46 %, the lowest compared to the rest of the fabricated films. These active properties depict that CH/CC/CT-4 film has the potential to be utilized for the packaging of light and oxygen-sensitive food products., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Despite the advancements in bone tissue engineering, the majority of implant failures are caused due to microbial contamination. So, efforts are being made to develop biomaterial with antimicrobial property enhancing the regeneration of damaged bone tissue. In the present study, chitosan-gelatin (CG) scaffolds containing silver-doped hydroxyapatite (AgHAP) nanoparticles at 0.5%, 1.0% and 1.5% (w/v) were fabricated by lyophilization technique. The results confirmed the synthesis of AgHAP nanoparticles and showed interconnected porous structure of the nanocomposite scaffolds with 89%-75% porosity. Similarly, the swelling percentage, degradation behavior and compressive modulus of CG-AgHAP nanocomposite scaffolds were 1666%, 40% and 0.7 MPa, respectively. The developed nanocomposite scaffolds revealed better antimicrobial properties and bioactivity. The cell culture studies showed favorable viability of Wharton's jelly stem cells on CG-AgHAP nanocomposite scaffolds. CAM (chorioallantoic membrane) assay determined the angiogenic potential with better visualization of blood vessels in the CAM area. Hence, the obtained results confirmed that CG-AgHAP 3 nanocomposite scaffold was the most suitable for bone tissue engineering applications among all scaffolds.

Due to its excellent antiseptic efficacy and antimicrobial properties, propolis has shown attractive advantages in wound dressings. However, an inclusive review of the propolis-based materials as a wound dressing is still lacking. The current short review summarizes the skin wound healing process, relates evaluation parameters, and then reviews the refined propolis-based materials dressings such as antimicrobial property, adhesion and hemostasis, anti-inflammatory and substance delivery. The approaches implemented to achieve these functions are classified and discussed. Furthermore, applications of propolis wound dressing for treating different types of wounds such as heal wounds, burns, and ulcers are presented. The future directions of propolis-based wound dressings for wound healing are further proposed. This review showed that propolis-based materials might be a promising new dressing for wound occlusion and tissue repairing., (© 2023. The Author(s).)

To improve the antimicrobial ability of MoS 2 -containing films, we used lignin and triple-frequency ultrasound for liquid-phase exfoliation (LPE) to obtain MoS 2 nanosheets. Photoresponsive antimicrobial films with MoS 2 nanosheets, lignin, polyvinyl alcohol and deep eutectic solvents were subsequently prepared. Lignin functionalized the MoS 2 nanosheets by chemically linking with S in MoS 2 and significantly improved the exfoliation efficiency. Tri-frequency ultrasound produces beneficial effects on the LPE process by creating a more homogeneous sound field and a stronger degree of cavitation. The concentration of MoS 2 nanosheets in the exfoliating solution could reach 1.713 mg/mL under the effect of lignin-ultrasound. The antimicrobial ability of the films was analyzed, and the colony-forming units of E. coli and S. aureus could be reduced from 7 × 10 6 to 1 × 10 6  cfu/mL under the irradiation of infrared. The lignin in the film undergoes depolymerization and demethoxylation under the irradiation of infrared to have a more phenolic hydroxyl structure, which confers the growth inhibition ability of the films for bacteria that cannot be in close contact with the film. The method we used has some significance for the preparation of MoS 2 nanosheets, and composite films prepared from MoS 2, and lignin can be used in food packaging, wound antimicrobials, and other fields., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Paper coating plays an important role in the paper properties, printability and application. The nanocoating is a multifunction layer that provides the paper with unique features. In this work, nanocoating formulas were prepared using a green method and component. The nanocoating formulas were based on biopolymers nanostarch NSt and nanochitosan NCh (NCS) decorated with Egyptian kaolinite Ka doped with zinc nanoparticles NCS@xka/ZnONPs (x represents different ratios) support for multifunctional uses. The nanocoating formulas were characterized using a physiochemical analysis as well as a topographical study. FTIR, XRD, SEM and TEM techniques were used. Additionally, the antimicrobial activity of the tested samples was assessed against six microorganisms including Gram-negative and Gram-positive bacteria. The prepared nanocoating formulas affirmed excellent antimicrobial activity as a broad-spectrum antimicrobial active agent with excellent activity against all representative microbial communities. The nanocoating with the highest ratio of Ka/ZnONPs (NCS@40 ka/ZnONPs) showed excellent antimicrobial activity with an inhibition percentage of more than 70% versus all microorganisms presented. The paper was coated with the prepared suspensions and characterized concerning optical, mechanical and physical properties. When Ka/ZnONPs were loaded into NCS in a variety of ratios, the characteristics of coated paper were enhanced compared to blank paper. The sample NCS@40 ka/ZnONPs increased tensile strength by 11%, reduced light scattering by 12%, and improved brightness and whiteness by 1%. Paper coated with NCh suspension had 35.32% less roughness and 188.6% less porosity. When coated with the sample NCS@10 ka/ZnONPs, the coated paper's porosity was reduced by 94% and its roughness was reduced by 10.85%. The greatest reduction in water absorptivity was attained by coating with the same sample, with a reduction percentage of 132%., (© 2023. The Author(s).)

Active packing systems employed to preserve food quality have gone through chains of sustainable development processes, reflecting the growth in consumer awareness of high-quality foods in eco-friendly packaging. Consequently, this study aims to develop antioxidant, antimicrobial, UV-shielding, pH-sensitive, edible, and flexible films from composites of carboxymethyl cellulose (CMC), pomegranate anthocyanin extract (PAE), and various fractions (1-15 %) of bacterial cellulose from the Kombucha SCOBY (BC Kombucha). Various analytical tools such as ATR-FTIR, XRD, TGA, and TEM were utilized to investigate the physicochemical characterization of BC Kombucha and CMC-PAE/BC Kombucha films. The DDPH scavenging test demonstrated the efficiency of PAE as a matrix with potent antioxidant properties, both as a solution and enclosed in composite films. The fabricated films of CMC-PAE/BC Kombucha showed antimicrobial activities against many pathogenic Gram-negative (Pseudomonas aeruginosa, Salmonella sp., and Escherichia coli), Gram-positive (Listeria monocytogenes and Staphylococcus aureus) bacteria, and Candida albicans, ranging from a 20 to 30 mm inhibition zone. The CMC-PAE/BC Kombucha nanocomposite has additionally been utilized to pack red grapes and plums. The results illustrated that CMC-PAE/BC Kombucha nanocomposite can increase red grapes and plums' shelf lives by up to 25 days while maintaining the fruits' quality better than those left unpacked., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Bacterial cellulose (BC) is currently among the most promising natural polymers. However, the production costs and biological inactivity are still challenges. The current study exploited the enzymatically hydrolyzed prickly pear peels (PPP) for BC production, which supported about 2.94 g/L as the sole production medium. The BC production was further optimized through a central composite design, where the maximum BC production was 6.01 g/L at 68 % PPPE at pH 4 after 11 days of incubation at 20 °C. The produced BC was characterized by FT-IR spectroscopy, XRD, and SEM analysis, and the results showed that PPPE is a promising carbon source for pure BC production. The BC membrane was separately loaded with several fruit byproduct extracts to enhance its biological activity for multiple applications. BC loaded with pomegranate peel extract (BC/PPE) revealed significant broad-spectrum antimicrobial activity, followed by BC loaded with pomegranate molasses (BC/PM). The BC/PPE membrane enhanced the shelf-life storage of strawberry fruits by about 5 days, with a reduction in the fruits' weight loss of 15 % compared to the uncovered group. The current study revealed the successful application of PPE for sustainable BC production with its packaging potential for enhancing strawberry shelf-life when loaded with PPE or PM., Competing Interests: Declaration of competing interest The authors declare no competing interests., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Biodegradable materials with antibacterial properties are highly promising. A novel antimicrobial nanocellulose (ECP) was synthesized in one-step by enzyme-catalyzed method to improve the mechanical and antimicrobial properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(HB-co-HV)]. The biodegradable nanocomposites were prepared by melt blending and the performance analysis results show that the nanocomposites display enhanced mechanical performances and antibacterial activities. Compared with the neat P(HB-co-HV), the P(HB-co-HV) doped with 0.5 wt%-ECP shows the highest mechanical properties with yield strength/elongation at break of 29.3 MPa, 7.63 %, respectively, an increase of 38 %/59 %, and a clear inhibition zone against Staphylococcus aureus (S. aureus) of approximately 3.0 mm. As a heterogeneous nucleation agent, ECP optimizes nucleation, and the interfacial interaction between phenol group and matrix promotes the compatibility and dispersion of ECP, resulting in superior mechanical properties of ECP-based composites. The P(HB-co-HV)/ECP nanocomposites have great potential in biomedical materials especially for the bone defect filling material., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Hemicellulose and its derivatives have attracted extensive attention as packaging materials and various methods have been utilized to improve its film formation properties. To make use of the byproduct in dissolving pulp production, hemicellulose collected from waste water was modified by carboxymethylation and blended with polyvinyl alcohol (PVA) to prepare composite film by solution casting method. Potassium cinnamate (PC) was further incorporated to endow the film with antibacterial activity. The properties of the composite films were characterized. Due to the good compatibility and intermolecular interactions, the composite film exhibited moderate oxygen barrier property (3.64-12.21 cm 3  μm m -2 d -1  KPa -1 ). The flexibility of the film was improved compared with pure PVA film although tensile strength was decreased. The film had good UV barrier properties and good antibacterial properties due to the introduction of PC. GAB model could be used to predict moisture sorption of the composite films. Moreover, the obtained film showed good performance in cherry tomato preservation. This work provided a prospective route for utilization of hemicellulose recovered from waste water for high value-added products., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

In this work, the effect of using Ag-doped TiO 2 nanopigments on optical, mechanical and antimicrobial properties of coated paper was explored. Furthermore, the long-term antimicrobial activity of the coated paper was examined for up to 25 years. Titanium dioxide (TiO 2 ) nanoparticles have been synthesized and doped with different percentages of Ag nanoparticles (Ag NPs) using a simple wet chemical approach. The Ag@TiO 2 modified nanopigments were in the form of nanorods with an average size of about 20 nm as observed from TEM images. Increasing Ag content from 0.01 to 1.0% showed an increase in the mechanical properties of coated paper in terms of tensile, stretching, tensile energy absorption and burst while preserving the optical properties. Moreover, the antimicrobial inhibition activity increased with increasing the Ag content. The 1% Ag@TiO 2 showed a long-lasting antimicrobial effect against Staphylococcus aureus (S. aureus) Gram-positive bacteria even after 25 years of ageing (93.4% inhibition). Investigation of reactive oxygen species (ROS) generation and reaction mechanism of antimicrobial activity over Ag/TiO 2 under visible light is proposed. These results suggest that Ag/TiO 2 NPs can be potentially used as a disinfection coating for paper and improving its mechanical properties., (© 2022. The Author(s).)

Gelatine is an excellent substitute for biodegradable packaging materials; nevertheless, it is necessary to mix it with other polymers due to its poor mechanical and high hydrophilicity. In the present study, we used Cylindropuntia fulgida mucilage (CF) as main constituent and gelatine (GTN). The Euphorbia caducifolia extract (ECE) was incorporated in concentrations of 0, 1, 5, 10, 20 %, and its influence on the film's morphological, thermal, mechanical, and water vapor barrier properties was assessed. The surface of fabricated CF/GTN/ECE biocomposite films was more homogeneous and smoother with the high concentration of in ECE. The elongation at break improved from 2 to 60.59 %, and WVP enhanced from 3.34 to 2.59 10 -4  g mm/mm 2  day kPa and highest antimicrobial activity of 3.62 ± 0.71 Log CFU g -1 when CF/GTN was incorporated with 20 % ECE. Incorporating CF and ECE 10 to 20 % makes these films a good substitute for the packaging of food products., (Copyright © 2022 Elsevier B.V. All rights reserved.)

In recent years, polysaccharides-based nanocomposites have been used for biomedical applications. In the current study, a nanocomposite based on myco-synthesized copper nanoparticles (CuNPs) and starch was prepared. The prepared nanocomposite was fully characterized using UV-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX), mapping, transmission electron microscope (TEM), and dynamic light scattering (DLS). Results revealed that this nanocomposite is characterized by nano spherical shape ranged around 200 nm as well as doped with CuNPs with size about 9 nm. Antimicrobial, antioxidant, and anticancer activities of the prepared nanocomposite were evaluated. Results revealed that CuNPs-based nanocomposite exhibited outstanding antibacterial and antifungal activity toward Escherichia coli ATCC25922, Bacillus subtilis ATCC605, Candida albicans ATCC90028, Cryptococcus neoformance ATCC 14,116, Aspergillus niger RCMB 02,724, A. terreus RCMB 02,574, and A. fumigatus RCMB 02,568. Moreover, CuNPs-based nanocomposite has a strong antioxidant activity as compared to ascorbic acid, where IC 50 was 18 µg/mL. Cytotoxicity test of CuNPs-based nanocomposite revealed that this nanocomposite is safe in use, where IC 50 was 185.1 µg/mL. Furthermore, CuNPs-based nanocomposite exhibited potential anticancer activity against MCF7 cancerous cell line where IC 50 was 62.8 µg/mL which was better than CuNPs alone. In conclusion, the prepared CuNPs with starch-based nanocomposite is promising for different biomedical applications as antimicrobial, antioxidant, and anticancer activities., (© 2021. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Bacterial cellulose (BC) is an ecofriendly biopolymer with diverse commercial applications. Its use is limited by the capacity of bacterial production strains and cost of the medium. Mining for novel organisms with well-optimized growth conditions will be important for the adoption of BC. In this study, a novel BC-producing strain was isolated from rotten fruit samples and identified as Lactiplantibacillus plantarum from 16S rRNA sequencing. Culture conditions were optimized for supporting maximal BC production using one variable at a time, Plackett-Burman design, and Box Behnken design approaches. Results indicated that a modified Yamanaka medium supported the highest BC yield (2.7 g/l), and that yeast extract, MgSO 4 , and pH were the most significant variables influencing BC production. After optimizing the levels of these variables through Box Behnken design, BC yield was increased to 4.51 g/l. The drug delivery capacity of the produced BC membrane was evaluated through fabrication with sodium alginate and gentamycin antibiotic at four different concentrations. All membranes (normal and fabricated) were characterized by scanning electron microscope, Fourier transform-infrared spectroscopy, X-ray diffraction, and mechanical properties. The antimicrobial activity of prepared composites was evaluated by using six human pathogens and revealed potent antibacterial activity against Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, and Streptococcus mutans, with no detected activity against Pseudomonas aeruginosa and Candida albicans., (© 2022. The Author(s).)

Background: Biopolymers are promising candidates that can be fabricated into hydrophilic matrices and used for many applications due to their distinctive properties such as non-toxic, biodegradable, biocompatibility, and low cost. A promising composite of chitosan and carrageenan with self-crosslinking has been prepared., Methods and Results: In this study, a rigorous approach for an inexpensive and non-toxic combination of different amounts of clove oil with two polyelectrolytes including chitosan and carrageenan in the form of beads has been prepared. The structure and the surface morphology of the beads were investigated using FTIR, X-ray diffraction (XRD), and SEM. Moreover, antimicrobial, antiviral activity, and molecular docking were evaluated. Antibacterial results revealed that chitosan/carrageenan@clove oil beads have antimicrobial activity as well as chitosan/carrageenan without clove oil against Escherichia coli AATCC25922, Pseudomonas aeruginosa AATCC27853, Staphylococcus aureus ATCC25923, Bacillus subtilis AATCC6051, and Candida albicans ATCC90028. Furthermore, maximum non-toxic concentration (MNTC) of chitosan/carrageenan@clove oil beads was (31.25 μg ml -1 ) which exhibited promising antiviral activity against Herpes simplex virus-1 (HSV-1), and was significantly higher than chitosan/carrageenan without clove oil, where antiviral activity was 82.94% and 57.64%, respectively. Eventually, docking study and computational calculation have been used to show the reactivity of the molecules., Conclusions: The developed chitosan/carrageenan@clove oil beads have shown promising properties to be used as carriers of drug delivery, tissue engineering, and regenerative medicine., (© 2021 Wiley-VCH GmbH.)

In this present work, a new design for antimicrobial wound bandages is presented. The wound dressings were prepared using cotton fibers reinforced with elastic compression straps and secured with a polyester fabric of tight mesh size. The cotton pads were doped with a wound healing biocomposite, composed of chitosan, glycogen, and ZnO nanoparticles (CG@ZnONPs) previously formulated through a green process. The size of ZnONPs in the prepared CG@ZnONPs was 30-80 nm. The cotton pads impregnated with the CG@ZnONPs nanocomposite were characterized using FTIR, SEM, EDX, TGA, and DTGA methods. Moreover, the prepared dressings were tested on a number of intentionally injured rats. In this experiment, the % contraction of the treated wounds was monitored and compared to that of a control group of wounded rats, to which only sterile gauzes were applied. The results showed a much faster and an almost complete healing of rats treated with the synthesized dressings and the results were further confirmed by histopathological examination. The dressings were also found to exert a significant antimicrobial activity against a number of pathogenic microorganisms, generally encountered in common wounds, and could therefore be recommended to be a novel biomedical application for a fast, successful, and flawless wounds healing process., (Copyright © 2021 Elsevier B.V. All rights reserved.)

This study aimed to develop a plasticized starch (PS) based film loaded with chitosan nanoparticles (CNPs, 1, 2, 3, and 4%) as a reinforcing and antibacterial agent. We examined the morphology, biodegradability, mechanical, thermo-mechanical, and barrier properties of the PS/CNPs films. The antimicrobial activity against both Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria was investigated by colony forming unit (CFU) and disc diffusion methods. A dense structure was obtained for all PS/CNPs films and, thus, their complete biodegradation occurred in more days than neat PS. The increase in the CNPs percentage led to improved mechanical behaviour and barrier properties. PS-CNPs composite films revealed inhibition zones against both E. coli and S. aureus, with the 100% reduction in CFU against S. aureus. The current study exhibited that PS-CNPs films were more effective in inhibiting bacteria growth than neat PS film, confirming the composite films potential application as antimicrobial food packaging., (Copyright © 2021 Elsevier B.V. All rights reserved.)

In this work, biocompatible, antimicrobial, and antiviral nanocomposites were prepared through two steps. In the first step, periodate oxidation of cellulose was performed to get dialdehyde cellulose (DAC). The second step included the reaction of DAC with sulfur-containing amino acids included Cysteine (Cys) and Methionine (Meth) in the presence of graphene oxide (GO). The prepared nanocomposites were characterized via FT-IR, SEM, TEM, and TGA. Antimicrobial and antiviral activities for all designed nanocomposites besides DAC were carried out. Both DAC/GO/Cys and DAC/GO/Meth exhibited a promising antimicrobial activity against Gram-negative (E. coli and P. aeruginosa), Gram-positive (B. subtilis and S. aureus), and unicellular fungi (C. Albicans and C. neoformans), while the DAC/GO/Cys/Meth nanocomposite was the lowest. Moreover, all designed nanocomposites have a strong antiviral activity against Herpes simplex virus 1(HSV-1) at minimum nontoxic concentration. Additionally, Computational procedures and Molecular docking showed the reactivity and stability of the molecules that have biological activity against Gram-positive, Gram-negative, and HSV-1. As well as DAC incorporation with amino acid enhanced their reactivity and their interaction., (Copyright © 2021 Elsevier B.V. All rights reserved.)

New chitosan derivatives bearing guanidinium functions were synthesized following different synthesis strategies. N-guanidinium chitosan acetate and N-guanidinium chitosan chloride were synthesized by direct reaction between chitosan and cyanamide in the presence of scandium(III) triflate. The synthesis of N-guanidinium chitosan (N,N'-dicyclohexyl) chloride and N-guanidinium chitosan (N-(3-dimethylaminopropyl)-N'-ethyl hydrochloride) chloride involved the reaction of chitosan with carbodiimides in ionic liquid. The chitosan derivatives were characterized by analytical techniques including 13 C solid state NMR, FT-IR spectroscopies, thermogravimetry and elemental analysis. The antimicrobial properties of chitosan and the new derivatives were investigated using the minimal inhibitory concentration (MIC) technique. All new guanylated chitosan derivatives displayed high antimicrobial activity in comparison with neat chitosan. The N-guanidinium chitosan acetate reduced the time required for killing to half in comparison with chitosan and recorded MIC values less than 3.125 mg/mL against all assayed microorganisms. This work opens new perspectives for using chitosan derivatives as antimicrobial surfaces., Competing Interests: Declaration of Competing Interest The authors declare no competing financial interest., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The present study deals with novel synthesizing method of TEMPO oxidized cellulose (extracted from bagasse) (TOC) amino acids (l-phenyl alanine (Phe) and l-tryptophan (Trp)) nano-composites as potential antimicrobial biocompatible agents. The produced nanocomposites were characterized via Fourier transform Infrared (FT-IR) spectroscopy, thermal analysis (TGA and DTGA), scanning electron microscope(SEM), and transmission electron microscope (TEM) which approved that the synthesis of composites in nano-scale in spherical shape with average particle size 72 and 44.37 nm for l-phenylalanine composite (Phe-TOC) and l-tryptophan composite (Trp-TOC) respectively. The antimicrobial studies were carried out on (i) Gram-negative bacteria: Escherichia coli (NCTC-10416) and Pseudomonas aeruginosa (NCID-9016); (ii) Gram-positive bacteria: Streptococcus aurous (NCTC-7447) and Bacillus subtilis (NCID-3610); (iii) unicellular fungi: namely, Candida albicans (NCCLS 11). The results were cleared that the both composites have high effective, rapid and broad-spectrum antimicrobial activity. The Trp-TOC showed slightly higher antimicrobial activity than Phe-TOC especially in time required of killing performance. The Phe-TOC has required 20 h for killing all microbial population while Trp-TOC required only 12 h. The MIC values were close in both nanocomposites with high clear zone measurements in the same concentration in the case of Trp-TOC., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Various ferulic acid (FA) dimers occurring in plant cell walls, such as 8-5-, 8-O-4-, 5-5-, and 8-8- coupled dimers, are effective antioxidants and potential antimicrobials. It is necessary to access these diferulates as reference compounds to validate those isolated from plants. 3,6-bis(4-hydroxy-3-methoxyphenyl)-tetrahydrofuro-[3,4-c]furan-1,4-dione, a 8-8-coupled FA dilactone generated from ferulic acid via radical coupling, has been used to synthesize 8-8-coupled FA dimers although few reports investigated the distribution of products and mechanisms involved in the transformation of FA dilactone. In this work, the FA dilactone, obtained from FA by a peroxidase-catalyzed radical coupling, was reacted under various base/acid conditions. Effects of reaction conditions and workup procedures on the distribution of products were investigated by GC-MS. The isolated products from such treatments of FA dilactone were characterized by NMR. New derivatives of FA dimer including 2-(4-hydroxy-3-methoxybenzylidene)-3-(hydroxyl-(4-hydroxy-3-methoxyphenyl)methyl)succinic acid and 2-(bis(4-hydroxy-3-methoxyphenyl)-methyl)-succinic acid were produced from NaOH treatment. Another novel 8-8-coupled cyclic FA dimer, diethyl 6-hydroxy-1-(4-hydroxy-3-methoxyphenyl)-7-methoxy-1,2-dihydronaphthalene-2,3-dicarboxylate was identified in products from FA dilactone treated by dry HCl in absolute ethanol. Mechanisms involved in such transformations were proposed., Competing Interests: The authors declare no conflict of interest.

Despite the advantages of bacterial cellulose (BC) over traditional cellulose, its low yield and little bioactivity makes a limitation to be used in an industrial scale. This paper was mainly dual aimed to increase the BC yield using a nanobioactive glass (NBG), and in situ synthesize BC/NBG bioactive nanocomposites by a novel and simple green method. Accordingly, the composites were prepared via in situ fermentation approach by incorporation of NBG particles into BC producing culture medium. The effect of NBG addition on the production process of cellulose, biocompatibility, bioactivity and antimicrobial activity were investigated. The results showed that NBG was enhanced and increased the BC yield and this has been achieved by maintaining these NBG on the pH value of the culture medium during the fermentation period. Moreover, it was effectively improved biocompatibility and antimicrobial properties of BC. This study evidenced that BC/NBG composite can be expected to be widely applied in biomedical industries such as bone regeneration and wound healing with the unique of being not harmful to humans., (Copyright © 2019 Elsevier B.V. All rights reserved.)

A facile and green route is introduced to fabricate antimicrobial composite films in this article from xylan (XL) and hydroxyethyl cellulose (HEC) with citric acid (CA) and polyethylene glycol 400 (PEG-400) as crosslinker and plasticizer, respectively. XL was obtained by precipitating wood hydrolysate (WH) produced during pulping process with ethanol. Antimicrobial activity was constructed by incorporating β-cyclodextrin/sodium benzoate (β-CD/NaBz) complex into the composite matrix. The interactions, including hydrogen bonds and covalent bonds, between the polymers were confirmed by FT-IR spectroscopy. Morphology and crystallinity of composite films at different curing time were investigated by AFM and XRD, respectively. The composite film cured for 40 min exhibits tensile strength up to 62.3 MPa and oxygen permeability (OP) as low as 1.0 cm 3 ·μm m -2 ·d -1 ·kPa -1 . Finally, the antimicrobial test against Staphylococcus aureus reveals superior antimicrobial activity of composite films with complex. In conclusion, the XL/HEC antimicrobial film has great potential in the field of sustainable food packing materials., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Nowadays the using of eco-systems to synthesize new materials is the promising issue. In this work, new eco-synthesis method was developed to prepare antimicrobial cellulosic-amino acid base ligand and complexes with copper. The complex was characterized via different instrumental analysis (Fourier transform infrared spectroscopy (FTIR), UV-vis, differential scanning calorimetry (DSC), dynamic light scattering (DLS), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX)) as well as two antimicrobial screening tools (minimal inhibition concentration (MIC) and time required for killing). The UV-vis spectroscopic data indicates the metal to-ligand charge transfer transitions which is consistent with square planar geometry. DLS and SEM approved that the complex particles are in nano-size. Prepared complex appeared highly antimicrobial activity against all tested microbial organisms which can be described as broad spectrum antimicrobial agent. Rapid killing kinetics was beneficial in helping to resolve an infection more rapidly., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In this work regenerated cellulose was prepared by phosphoric acid as a primarily step in preparation of biodegradable foam. Copper nanoparticles (Cu-NPs) were embedded onto the cellulosic suspensions followed by freeze drying process. The scanning electron microscopy (SEM) revealed the presence of individual chunky regenerated cellulose fibers in the dimensions of micro that enhanced tendency to aggregate during drying. X-ray diffraction (XRD) demonstrated that, the treatment of cellulose with concentrated phosphoric acid led to defibrated cellulose with lower crystallinity index than original cellulose fibers. The study provided insights about the influence of the Cu-NPs on the structure, thermal stability and the electrical contributions of the considered cellulose-based foam. The electrical and dielectric properties were studied by means of the broadband dielectric spectroscopy. The dielectric spectra were dominated by an anomalous behavior of the permittivity as illustrated versus frequency of the investigated samples. The real part of conductivity follows the universal power law at higher frequencies. The foam loaded Cu-NPs exhibit biodegradability and highly efficient antimicrobial activity against Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In the present study, phosphorylated nanocellulose (P-NC) has been prepared from date palm sheath fibers by a solvent-free acid hydrolysis procedure. Eighteen different treatment procedures were employed for the composite treatment of jute fabric. Different fractions of phosphorylated nanocellulose (1-4%) and chitosan (0.5-2%) were used to examine the effects of treatment procedures on the resulting jute fabric composites. Weight uptake, phosphorus content and tensile properties of the treated jute fabrics have been reported. ATR-FTIR spectroscopy, X-ray diffractometer, transmission electron microscopy, environmental scanning electron microscopy, energy-dispersive X-ray spectroscopy and thermo-gravimetric analysis were used to gain insight into the mechanism of interaction between jute fabric, CS macromolecules, and P-NCs. In addition, the development of antimicrobial and thermal stability properties on jute fabric has been investigated., (Copyright © 2018. Published by Elsevier B.V.)

In the present study, tosylcellulose (TC) was used as a key intermediate for the selective coupling with 3-aminopropyltrimethoxysilane (APTMS) affording amino-propylsilane-grafted tosylcellulose (TC-Si). Solid state 13 C NMR and FT-IR analyses confirmed the coupling and self-condensation of APTMS along TC. The changes in the surface morphology of the functionalized cellulose were identified by SEM imaging. The thermal stability of TC-Si was significantly improved as compared to MCC and TC. A new organic/inorganic hybrid cellulosic material was fabricated by embedding TiO 2 nanoparticles into TC-Si network. The new cellulose polymers were investigated for their ability to promote the proliferation of human skin fibroblast (BJ1). The cell cytotoxicity assay showed that both TC and TC-Si possessed moderate toxicity to BJ1 cells by 17% and 23.8%, respectively at 20 μM. Meanwhile, TC-Si/TiO 2 hybrid enhanced the proliferation of BJ1 by 42%. Additionally TC-Si/TiO 2 hybrid demonstrated promising antimicrobial activity against Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

The cellulose-based antimicrobial hydrogel was prepared from seed and husk cellulosic fibers of olive industry residues by load silver nanoparticles (AgNPs) onto grafted acrylamide monomer (Am) cellulosic fibers. The grafting approach was the free radical mechanism by utilizing ceric ammonium nitrate (CAN) as initiator in aqueous medium and N,N methylene bisacrylamide (MBAm) as a cross linker. The effect of different grafting conditions on the properties of produced hydrogels has been studied by determining the grafting parameters, i.e. concentration of Am, MBAm, grafting time and temperature to optimize grafting yield (G %), grafting efficiency (GE %), and swelling %. Characterizations of the obtained hydrogels were performed through monitoring swelling behavior, FTIR spectroscopy, SEM, and EDX. AgNPs were grown into the prepared hydrogel. Hydrogel/AgNPs were characterized by FT-IR spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The hydrogel loaded AgNPs exhibit high efficient antimicrobial activity against Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans., (Copyright © 2018. Published by Elsevier B.V.)

Bionanocomposites hydrogel based on conducting polymers were successfully fabricated from chitosan/polyacrylic acid/polypyrrole (CS/PAA/PPy) as well as the magnetite nanoparticle (Fe 3 O 4 -NPs) was prepared via co-precipitation method. In addition, different ratios of Fe 3 O 4 -NPs were added to the prepared bionanocomposites to enhance the antimicrobial and the electrical conductivity of the prepared conductive hydrogel. Furthermore, the morphology, the swelling percent, antimicrobial activity and the dielectric properties of the prepared conducting bionanocomposites hydrogel were investigated. The antibacterial activities of the experienced microbes were improved with the increasing the loading of Fe 3 O 4 -NPs in conducting Bio-nanocomposites hydrogel. Moreover, the DC-conductivity was examined and our resulted indicated that the DC-conductivity was enhanced by increasing the loadings of Fe 3 O 4 -NPs compared to that of the pure CS/PAA as well as CS/PAA/PPy., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Two series of amphiphilic antimicrobial copolymers containing ciprofloxacin (CPF) and amine functional groups have been synthesized via free-radical copolymerization. The chemical structures of the different amine groups and the copolymer compositions have been systematically varied to study how the structure of the copolymer exerts an influence on the antibacterial activity. The viability of Escherichia coli in the presence of antimicrobial copolymers was observed by confocal laser-scanning microscopy (CLSM). CLSM as well as atomic-force microscopy (AFM) were applied to visualize changes in morphology of bacteria treated with antimicrobial copolymers and elucidate the antimicrobial mechanism of the antimicrobial copolymers. Morphological changes of bacteria observed via AFM and CLSM demonstrated that the antibacterial mechanism was due to the disruption of the bacterial membrane. The destruction of the cell membrane was also confirmed by the leakage of intracellular components, which had a strong absorbance at 260 nm. The inhibitory process was monitored by UV absorption dynamically.

Removal efficiencies of sulfamonomethoxine (SMM) and its degradation intermediates formed by treatment with zeolite/TiO 2 composites through adsorption and photocatalysis were investigated in fresh aquaculture wastewater (FAWW). Coexistent substances in the FAWW showed no inhibitory effects against SMM adsorption. Although coexistent substances in the FAWW inhibited the photocatalytic decomposition of SMM, the composites mitigated the inhibition, possibly because of concentration of SMM on their surface by adsorption. LC/MS/MS analyses revealed that hydroxylation of amino phenyl and pyrimidinyl portions, transformation of the amino group in the amino phenyl portion into a nitroso group, and substitution of the methoxy group with a hydroxyl group occurring in the initial reaction resulted in the formation of various intermediates during the photocatalysis of SMM. All detected intermediates had a ring structure, and almost all intermediates disappeared at the same time SMM was completely decomposed. Ph-OH formed by hydroxylation of the phenyl portion was detected upon decomposition of SMM during photocatalysis. The removal of Ph-OH by the composites proceeded more rapidly than that by TiO 2 alone under ultraviolet irradiation. The SMM and Ph-OH were completely degraded by the composites within 30min, showing that the zeolite/TiO 2 composites were effective in removing SMM and its intermediates from FAWW., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Water-resistant cellulose foam paper was developed in this work in an attempt to improve the antimicrobial activity of cellulose foam paper for capture and deactivation of pathogenic microorganisms existed in water. Results indicated that the cellulose foam paper could significantly improve household water quality by incorporating guanidine-based polymer modified with starch or called antibacterial thermoplastic starch (ATPS) into fibre network in the presence of proper amount of fiber fines. Ring diffusion testing demonstrated that no ATPS diffused around or underneath of samples, verifying that cellulose foam filter added by ATPS were of non-leaching type. Furthermore, the viability of bacteria before and after filtering and the structure of cellulose foam paper were analyzed via fluorescence microscopy and scanning electron microscopy images. The findings further proved the effectiveness of antimicrobial cellulose foam in deactivating pathogens, E.coli in particular., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Chronic wounds, pressure sores, lesions, and infections of microbial origin in bedridden, paralyzed, or malnutrition patients remain the object of study of many researchers. A variety of factors behind the development of these disorders are related to the patient's immune system, making it unable to respond effectively to the treatment of the wound. These factors can be properly controlled, giving particular importance to the ethiology and stage of the wound, as well as the time periods corresponding to the replacement of the dressings. The present research reports a novel foam/soft material, L -Cys-g-PCL, with an application for decubitus/pressure ulcers, especially for wounds with a difficult healing process due to infections and constant oxidation of the soft tissues. During this work, the interactions between S. aureus and L -Cys-g-PCL foam were studied under conditions that simulate decubitus ulcers; namely, pH and exudate. The effects of duration of grafting (1 or 8 h) and pH (7.0 and 8.9) on wettability, surface energy, swelling, and porosity were also evaluated. Results showed an effective microbicidal activity exhibiting an inhibition ratio of 99.73% against S. aureu s. This new L -Cys-g-PCL soft material showed saftey to contact skin, ability to be shaped to fill in sunken holes (craters) - pressure ulcers stage III - and to act as a smart material responsive to pH, which can be tailored to develop better swelling properties at alkaline pH where exudates are normally higher, so as to address exudate self-cleaning and prevention of desiccation..

Cellulose electrospun nanofibrous mats coated with bilayers of chitosan (CS) and epigallocatechin gallate (EGCG) or with bilayers of CS-rectorite (REC) composite (CS-REC) and EGCG were fabricated via layer-by-layer (LBL) self-assembly technique. LBL-structured cellulose nanofibers still maintained three-dimension fiber structure according to the observation from scanning electron microscopy images. The average diameter of nanofibers were enlarged with the addition of REC. X-ray photoelectron spectroscopy results confirmed the deposition of CS and CS-REC onto the corresponding mats. The tensile strength and rate of elongation at break of LBL-structured nanofibers had no difference from those of uncoated nanofibers. The encapsulation efficiency and loading capacity of nanofibers were enhanced in the presence of REC. In addition the in-vitro cumulative release profiles of EGCG indicate that the addition of REC delayed the release of EGCG. Antimicrobial assay demonstrated the inhibitory effects of CS and EGCG on the growth of Staphylococcus aureus. Meanwhile the CS-REC composites improved the antimicrobial effects of CS and EGCG by adsorption of bacteria to the surface of REC then enhancement of exposure of bacteria to EGCG and the matrix of CS., (Copyright © 2016 Elsevier B.V. All rights reserved.)

A novel antimicrobial packaging material was obtained by incorporating cinnamon essential oil/β-cyclodextrin inclusion complex (CEO/β-CD-IC) into polylacticacid (PLA) nanofibers via electrospinning technique. The CEO/β-CD-IC was prepared by the co-precipitation method and SEM and FT-IR spectroscopy analysis indicated the successful formation of CEO/β-CD-IC, which improved the thermal stability of CEO. The CEO/β-CD-IC was then incorporated into PLA nanofibers by electrospinning and the resulting PLA/CEO/β-CD nanofilm showed better antimicrobial activity compared to PLA/CEO nanofilm. The minimum inhibitory concentration (MIC) of PLA/CEO/β-CD nanofilm against Escherichia coli and Staphylococcus aureus was approximately 1 mg/ml (corresponding CEO concentration 11.35 μg/ml) and minimum bactericidal concentration (MBC) was approximately 7 mg/ml (corresponding CEO concentration 79.45 μg/ml). Furthermore, compared with the casting method, the mild electrospinning process was more favorable for maintaining greater CEO in the obtained film. The PLA/CEO/β-CD nanofilm can effectively prolong the shelf life of pork, suggesting it has potential application in active food packaging., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

An alkaline isoform of the PR-5 protein (designated GmOLPc) has been purified from soybean hulls and identified by MALDI-TOF/TOF-MS. GmOLPc effectively inhibited in vitro the growth of Phytophthora soja spore and Pseudomonas syringae pv glycinea. The antimicrobial activity of GmOLPc should be mainly ascribed to its high binding affinity with vesicles composed of DPPG, (1,3)-β-D-glucans, and weak endo-(1,3)-β-D-glucanase activity. From the 3D models, predicted by the homology modeling, GmOLPc contains an extended negatively charged cleft. The cleft was proved to be a prerequisite for endo-(1,3)-β-D-glucanase activity. Molecular docking revealed that the positioning of linear (1,3)-β-D-glucans in the cleft of GmOLPc allowed an interaction with Glu83 and Asp101 that were responsible for the hydrolytic cleavage of glucans. Interactions of GmOLPc with model membranes indicated that GmOLPc possesses good surface activity which could contribute to its antimicrobial activity, as proved by the behavior of perturbing the integrity of membranes through surface hydrophobic amino acid residues (Phe89 and Phe94).

Contact active surfaces are an innovative tool for developing antibacterial products. Here, the microfibrillated cellulose (MFC) surface was modified with the β-lactam antibiotic benzyl penicillin in aqueous medium to prepare antimicrobial films. Penicillin was grafted on the MFC surface using a suspension of these nanofilaments or directly on films. Films prepared from the penicillin-modified MFC were characterized by Fourier transform infrared spectroscopy, contact angle measurements, elemental analysis, and X-ray photoelectron spectroscopy and tested for antibacterial activity against the Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. Penicillin-grafted MFC films exhibited successful killing effect on Gram-positive bacteria with 3.5-log reduction whereas bacteriostatic efficiency was found in penicillin-grafted MFC suspension. The zone of inhibition test and leaching dynamic assay demonstrated that penicillin was not diffused into the surrounding media, thus proving that the films were indeed contact active. Thus, penicillin can be chemically bound to the modified substrate surface to produce promising nonleaching antimicrobial systems.

Toward our goal of scalable, antimicrobial materials based on photodynamic inactivation, paper sheets comprised of photosensitizer-conjugated cellulose fibers were prepared using porphyrin and BODIPY photosensitizers, and characterized by spectroscopic (infrared, UV-vis diffuse reflectance, inductively coupled plasma optical emission) and physical (gel permeation chromatography, elemental, and thermal gravimetric analyses) methods. Antibacterial efficacy was evaluated against Staphylococcus aureus (ATCC-2913), vancomycin-resistant Enterococcus faecium (ATCC-2320), Acinetobacter baumannii (ATCC-19606), Pseudomonas aeruginosa (ATCC-9027), and Klebsiella pneumoniae (ATCC-2146). Our best results were achieved with a cationic porphyrin-paper conjugate, Por((+))-paper, with inactivation upon illumination (30 min, 65 ± 5 mW/cm(2), 400-700 nm) of all bacterial strains studied by 99.99+% (4 log units), regardless of taxonomic classification. Por((+))-paper also inactivated dengue-1 virus (>99.995%), influenza A (∼ 99.5%), and human adenovirus-5 (∼ 99%). These results demonstrate the potential of cellulose materials to serve as scalable scaffolds for anti-infective or self-sterilizing materials against both bacteria and viruses when employing a photodynamic inactivation mode of action.

To confer cellulose fibers antimicrobial and antioxidant activities, chitosan (CS)/lignosulfonates (LS) multilayers were constructed on fibers surfaces through layer-by-layer deposition technique. The formation of CS/LS multilayers on cellulose fibers surfaces was verified by X-ray photoelectron spectroscopy (XPS) and zeta potential measurement. The surface morphologies of CS/LS multilayers on fibers surfaces were observed by atomic force microscopy (AFM). The results showed that characteristic element (i.e. N and S element) content increased with increasing bilayers number, the surface LS content increased linearly as a function of bilayers. Zeta potential of modified fibers was inversed after deposition of each layer. AFM phase images indicated that the cellulose microfibrils on fibers surfaces were gradually covered by granular LS aggregate. The antimicrobial testing results demonstrated that CS/LS multilayers modified fibers with CS in the outermost layer exhibited higher antimicrobial activity against Escherichia coli. The antioxidant testing results showed that antioxidant activity of CS/LS multilayers modified fibers was better than that of original fibers under the same oxidation conditions., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Bionanocomposites were developed by casting/evaporation of wheat gluten (WG), cellulose nanocrystals (CNC), and TiO2 nanoparticles. The effect of addition of different percentages of CNC, and TiO2 on tensile strength (TS), Young's modulus and water sensitivity was studied. A significant improvement in the studied properties is observed when 7.5% CNC and 0.6% TiO2 is added to WG. WG/CNC 7.5%/0.6% TiO2 blend suspension was chosen to coat commercial packaging unbleached kraft paper sheets via 1, 2 and 3 coating layers. A significant enhancement of 56% and 53% in breaking length and burst index, respectively, was achieved for 3 layers coated paper. The antimicrobial activity of the coated papers, against Saccharomyces cervisiae, Gram-negative bacteria Escherichia coli and Gram-positive bacteria Staphylococcus aureus, was investigated and expressed in terms of reduction % of surviving number (CFU) of the tested organisms. More than 98.5% reduction in CFU was observed against the organisms compared to TiO2-free coated paper., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Preparation of a new water-soluble, cellulose derivative via a supramolecular route is presented. In a one-step procedure, carboxymethyl cellulose (CMC) was reacted with the Cu(BF4)2 complex of 4'-chloro[2,2':6',2″]terpyridine to generate the desired CMC-Cu(II)-terpyridine derivative. This polymeric salt was characterized by elemental analysis, ultraviolet-visible spectroscopy (UV-visible), Fourier transform infrared (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), rheological properties measurements, thermogravimetric analysis (TGA), dynamic mechanical thermal analysis (DMTA), and tensile strength properties testing. In addition, antimicrobial properties were demonstrated against Gram-positive bacteria (Staphylococcus aureus and Streptococcus thermophilus), Gram-negative bacteria (Escherichia coli), and yeast (Saccharomyces cervisiae). The minimum inhibitory concentration of the prepared metallo-terpyridine CMC derivative against the studied microorganisms ranged from 6 to 8 mg/L to achieve ≥90% of microbial growth inhibition., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Sugarcane bagasse (SCB) was grafted with acrylamide (AAm) and glycidyl methacrylate (GMA) by chemical oxidation method. The effect of monomer/initiator molar ratio, reaction time, reaction temperature and material to liquor ratio on the degree of grafting was investigated. The optimum conditions for grafting were: monomer/initiator molar ratio 1 for AAm and 2 for GMA, reaction time 4h, reaction temperature 80°C and materials to liquor ratio 1:20. Silver nanoparticles (AgNPs) were prepared and characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Ungrafted SCB, SCB-g-AAm and SCB-g-GMA were impregnated into silver (Ag) nanoparticles colloidal solution. The ungrafted SCB, grafted SCB and their nanocomposites with Ag nanoparticles were characterized by FT-IR spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The grafted SCB/Ag nanoparticles exhibit better antimicrobial activity against Escherichia coli as the model Gram-negative bacteria, Staphylococcus aureus as the model Gram-positive bacteria and Aspergillus flavus and Candida albicans (yeasts) than ungrafted SCB/AgNPs., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

In this work, flexible and free-standing composite films of nanofibrillated cellulose/polypyrrole (NFC/PPy) and NFC/PPy-silver nanoparticles (NFC/PPy-Ag) have been synthesized for the first time via in situ one-step chemical polymerization and applied in potential biomedical applications. Incorporation of NFC into PPy significantly improved its film formation ability resulting in composite materials with good mechanical and electrical properties. It is shown that the NFC/PPy-Ag composite films have strong inhibition effect against the growth of Gram-positive bacteria, e.g., Staphylococcus aureus. The electrical conductivity and strong antimicrobial activity makes it possible to use the silver composites in various applications aimed at biomedical treatments and diagnostics. Additionally, we report here the structural and morphological characterization of the composite materials with Fourier-transform infrared spectroscopy, atomic force microscopy, and scanning and transmission electron microscopy techniques.

Silver nanoparticles (Ag NPs) were synthesized rapidly in one pot via the Tollens reaction, in which quaternized chitosan (QCS) and rectorite (REC) acted as the reducing and stabilizing agent, while other chemical reducing and stabilizing agents and the surfactant were not included. X-ray diffraction, scanning electron microscopy and transmission electron microscopy results showed that spherical Ag NPs with uniform sizes were obtained, the layers of clay were peeled and thus exfoliated QCS/REC/Ag NP (QCRAg) nanocomposite was achieved. Moreover, Ag NPs dispersed well in the exfoliated nanocomposite matrix, some Ag NPs even entered into the interlayer of REC. QCRAg nanocomposites showed strong antimicrobial activity; the lowest minimum inhibitory concentration against Staphyloccocus aureus was only 0.0001% (w/v). The study reveals that the obtained QCRAg nanocomposites have great potential for biomedical applications.

Microwave irradiation was used to intercalate quaternized carboxymethyl chitosan oligosaccharide (QCMCO) into the layer of rectorite (REC) to prepare QCMCO/REC (QCOR) nanocomposites in 70 min, which was much faster than conventional heating method of 48 h. The structures and morphology of QCOR nanocomposites were characterized by XRD, TEM, FT-IR and zeta potential analysis, the thermal behavior and antimicrobial activity of QCOR nanocomposites were also discussed. The results revealed that the interlayer distance of QCOR nanocomposites enlarged with the increase of QCMCO content, hydrogen bonding and electrostatic interaction between QCMCO and REC took place. As compared to QCMCO, the crystallinity of QCOR nanocomposites reduced, the thermal stability of QCOR nanocomposites improved, and the inhibitory activity of QCOR nanocomposites against microorganisms was stronger, the lowest minimum inhibition concentration was only 0.025% (w/v), the antimicrobial mechanism was discussed via TEM and SEM micrographs., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

The silver-nanoparticle (AgNP) containing paper was successfully prepared. The AgNP is deposited by the in situ reduction of silver nitrate on the acrylamide grafted bagasse paper sheets in the presence of citrate molecules as stabilizing agent. In the present paper, grafting of acrylamide onto bagasse paper sheets using potassium persulfate was carried out under the influence of microwave radiations (MWR). The modified paper sheets were characterized by Fourier transform infrared spectroscopy (FTIR), UV-spectroscopy, and scanning electron microscopy (SEM). Antimicrobial activities of the prepared paper sheets were also investigated against G+ve bacterium Staphylococcus aureus, G-ve bacterium Pseudomomas aeruginosa, and yeast Candida albicans, which are model microorganisms for testing bactericidal properties. The AgNP containing paper sheets exhibited antibacterial activity., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

A silver nanoparticle colloid was prepared by a modified Tollens method using d-glucose as the reduction agent. The obtained nanoparticles were used for the modification of pine, linter and recycled cellulose fibers. Although the silver contents were relatively low (0.05-0.13 wt.%), the cellulose-sheets prepared from the modified fibers show improved mechanical and viscoelastic properties. The tensile index (strength) increased with up to 30% in comparison to the index of the sheets obtained from the untreated fibers. The influence of the nanoparticles on the viscoelastic properties of the cellulose sheets was investigated by dynamic mechanical analysis (DMA) in the temperature range from -120 to 20 °C and with a force frequency of 100 Hz. A broad relaxation transition positioned at -80 °C was observed in the loss modulus spectrum of all the cellulose sheets, while the Ag-modified sheets exhibited higher storage moduli values in the whole temperature range. The antimicrobial activity tests show that the pine, silver and recycled cellulose fiber sheets with silver nanoparticles can be successfully employed to prevent the viability and growth of the common pathogens Staphylococcus aureus, Escherichia coli and Candida albicans., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Modified guanidine-based polymers with chain extension were synthesized by condensation and cross-linking polymerizations in an attempt to increase molecular weight and charge density of the antimicrobial polymers. The antimicrobial activity and the corresponding mechanisms were investigated by several approaches. The results indicated that the antimicrobial activities of the modified guanidine-based polymer, based on the minimum inhibition concentration (MIC) against E.coli, varied with alkyl monomer ratios. UV absorption at 260 nm further quantified the amount of intracellular components leaked into bacteria suspension. The UV absorption measurements were also used to monitor inhibition processes dynamically. It was found that the modified guanidine-based polymer inhibited the growth of bacteria by causing membrane compromised and intracellular leaked. Dual fluorescent dyes were used to stain all bacteria including the dead ones, which enabled us to utilize CLSM to visualize the viability of bacteria in the presence of various modified guanidine-based polymers without causing any damage. The morphologies of bacteria untreated and treated with modified guanidine-based polymer were observed using an atomic force microscope (AFM), which further demonstrated the damage of E.coli membrane and the leakage of intracellular component induced by the modified guanidine-based polymers., (© 2011 American Chemical Society)