Search

The rapid development of emerging electronics requires power sources with the advantages of lightweight, high efficiency, and portability. Considering the use of critical raw materials (such as Li, Co, etc.) and the increasing global concern of battery waste, self-charging power systems (SCPSs) integrating energy harvesting, power management, and energy storage devices have been envisioned as promising solutions to replace traditional batteries to avoid the use of toxic materials and the need of frequent recharging/replacement. Up to date, the reported SCPSs still hold the problem of large form factor, unscalable fabrication, noble materials, and material complexity. In our work, a highly stable and eco-friendly organic conductive ink based on poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) has been developed for monolithic fabrication on-paper SCPSs almost fully through a simple direct ink writing (DIW) process. The ink possesses multiple functions and enables to directly print almost all the key components in the SCPSs, including electrodes for triboelectric nanogenerators (TENGs, mechanical energy harvesters), electrodes for micro-supercapacitors (MSCs, energy storage devices), and interconnects, on the same paper substrate in a monolithic manner without the need for “post-integration”. The monolithic printing process exhibits excellent upscaling capability for manufacturing. In particular, the direct patterning merit of the DIW process offers great flexibility in optimizing the system performance through adjusting the cell number, electrode dimension, and thickness of the MSC arrays. By adjusting the cell numbers, the MSC arrays attain high-rate capability up to 50 V/s to match the pulsing electricity produced from the TENGs. For small-size printed SCPSs (~ 2 cm × 3 cm ×1 mm), after continuous press and release of the TENGs for ~79000 cycles, the 3-cell series-connected MSC array can be charged to 1.6 V while 6-cell array to 3.0 V. For a lar, Part of ISBN 9789189896925QC 20240719

The time-to-failure for oil-impregnated paper (OIP) insulation is governed by two primary aging mechanisms: electrical and thermal. The electrical life can be represented as an Inverse Power Law, where lifetime is inversely proportional to applied electric field. The process of thermal aging on the other hand is established by Arrhenius Law, which relates the rate of aging exponentially to temperature. Due to thermal aging, the structure of insulation is altered owing to chemical changes like oxidation, polymerization, and cellulose degradation. For life estimation of a service-aged high-pressure gas filled (HPGF) cables, electrical endurance tests are normally performed at controlled voltage levels to estimate the time to breakdown. However, it is equally necessary to investigate how thermal aging influence changes in the electrical life of insulation. Therefore, in this paper, firstly short-term ramped stress tests are carried out on elevated thermal aged OIP samples extracted from already field-aged HPGF to find a rough estimate of breakdown voltages at different temperatures. Then, long-term electro-thermal step stress tests are performed on the samples to establish a correlation of temperature on the electrical life of the OIP insulation. The long-term stress tests produce reliable breakdown statistics and Maximum Likelihood Estimation of Inverse Power Law fitted on 2-parameter Weibull distributed breakdown data indicate a reduction of model parameter, n from 13.61 to 7.38 with an increase in temperature from 45 to 75 °C and a constant shape factor, beta of 1.50. The dissipation factor, tandelta related to the aging also shows an increase with temperature across a wide frequency range and is inversely proportional to the breakdown voltage., Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public., DC systems, Energy conversion & Storage, High Voltage Technology Group