Search

Gas explosion accidents are a leading cause of casualties in underground coal mines. This study investigates the variation patterns of explosion temperature and pressure under different initial gas concentration conditions using a 20 L explosion characteristic test system and high-precision sensors. Accurate post-explosion gas analyses were conducted using a GC9560 gas chromatograph. Our research aligns with global research, finding that initial gas concentrations within the range of 5.8%–13.3% generate maximum explosion pressures between 0.3 and 0.9 MPa, posing a significant overpressure hazard to humans. Comprehensive fitting analyses of various post-explosion gases reveal that at an initial gas concentration of 10.6%, the produced H2 can reach its lower explosion limit, indicating a risk of secondary explosions. Furthermore, post-explosion CO levels can peak at 9.87%, potentially causing poisoning or death, while elevated CO2 levels and diminished O2 concentrations could lead to asphyxiation. A unique observation at a 9.5% concentration was a secondary temperature rise, with the relationship between temperature delay, heating time, and initial gas concentration presenting a U-shaped pattern that mirrors theoretical expectations. This study advances the field by addressing research gaps in post-explosion gas analysis and emphasizing the necessity of precise monitoring and control of gas concentrations, thereby offering novel insights and substantial theoretical and practical contributions to the prevention of gas explosion incidents in underground coal mines.

Abstract The gas content is crucial for evaluating coal and gas outburst potential in underground coal mining. This study focuses on investigating the in-situ coal seam gas content and gas sorption capacity in a representative coal seam with multiple sections (A1, A2, and A3) in the Sydney basin, where the CO2 composition exceeds 90%. The fast direct desorption method and associated devices were described in detail and employed to measure the in-situ gas components (Q 1, Q 2, and Q 3) of the coal seam. The results show that in-situ total gas content (Q T) ranges from 9.48 m3/t for the A2 section to 14.80 m3/t for the A3 section, surpassing the Level 2 outburst threshold limit value, thereby necessitating gas drainage measures. Among the gas components, Q 2 demonstrates the highest contribution to Q T, ranging between 55% and 70%. Furthermore, high-pressure isothermal gas sorption experiments were conducted on coal samples from each seam section to explore their gas sorption capacity. The Langmuir model accurately characterizes CO2 sorption behavior, with fit coefficients (R 2) greater than 0.99. Strong positive correlations are observed between in-situ gas content and Langmuir volume, as well as between residual gas content (Q 3) and sorption hysteresis. Notably, the A3 seam section is proved to have a higher outburst propensity due to its higher Q 1 and Q 2 gas contents, lower sorption hysteresis, and reduced coal toughness f value. The insights derived from the study can contribute to the development of effective gas management strategies and enhance the safety and efficiency of coal mining operations.

Abstract Gas explosions, particularly those involving methane–air mixtures, present considerable hazards in confined spaces, such as coal mines. Comprehending the explosion characteristics and their correlations with initial gas concentrations is vital for devising effective safety measures. This study examines the influence of initial gas concentration on explosion temperature, overpressure, and flame evolution in methane–air premixed gas explosions, utilizing a custom-built 20-L spherical explosion experimental apparatus. The explosion temperatures display an oscillatory pattern, reaching maximum values at 6.5%, 9.5%, and 12% initial gas concentrations, with corresponding temperatures of 995 K, 932 K, and 1153 K. The maximum overpressure exhibits an initial rise and fall trend, modeled by an exponential function. Notably, in proximity to the 9.5% concentration, the pressure wave fosters the reverse propagation of the flame wave, leading to a secondary temperature increase. Flame sensors were employed to investigate the presence, absence, and duration of flames, demonstrating that elevated initial gas concentrations resulted in more prolonged flame durations and increased harm. At an initial gas concentration of 9.5%, a persistent flame is generated instantaneously during the explosion. Furthermore, the study analyzes the interplay between temperature and overpressure, underscoring the significance of mitigating high-temperature burns near tunnel walls and enclosed spaces. These findings advance the understanding of gas explosion dynamics and hold substantial implications for safety measures in coal mines.

Well-developed pores and cracks in coal reservoirs are the main venues for gas storage and migration. To investigate the multi-scale pore fractal characteristics, six coal samples of different rankings were studied using high-pressure mercury injection (HPMI), low-pressure nitrogen adsorption (LPGA-N2), and scanning electron microscopy (SEM) test methods. Based on the Frankel, Halsey and Hill (FHH) fractal theory, the Menger sponge model, Pores and Cracks Analysis System (PCAS), pore volume complexity (Dv), coal surface irregularity (Ds) and pore distribution heterogeneity (Dp) were studied and evaluated, respectively. The effect of three fractal dimensions on the gas adsorption ability was also analyzed with high-pressure isothermal gas adsorption experiments. Results show that pore structures within these coal samples have obvious fractal characteristics. A noticeable segmentation effect appears in the Dv1 and Dv2 fitting process, with the boundary size ranging from 36.00 to 182.95 nm, which helps differentiate diffusion pores and seepage fractures. The D values show an asymmetric U-shaped trend as the coal metamorphism increases, demonstrating that coalification greatly affects the pore fractal dimensions. The three fractal dimensions can characterize the difference in coal microstructure and reflect their influence on gas adsorption ability. Langmuir volume (VL) has an evident and positive correlation with Ds values, whereas Langmuir pressure (PL) is mainly affected by the combined action of Dv and Dp. This study will provide valuable knowledge for the appraisal of coal seam gas reservoirs of differently ranked coals.