Search

Introduction. Sepsis rates are increasing, with Gram-negative organisms representing a large proportion of bloodstream infections. Rapid antibiotic administration, alongside diagnostic investigations, is required for the effective management of these patients. Gap statement. Current diagnostics take ~48 h for a final report; therefore, rapid diagnostics are required. Aim. This study investigated a novel antibiotic sensitivity method, the scattered light integrating collector (SLIC), combined with a rapid identification method using matrix-assisted laser desorption/ionization time of flight (MALDI-TOF) technology to determine if an accurate identification and susceptibility result can be provided within 4 h of a positive blood culture report. Methodology. A total of 47 blood cultures containing Gram-negative bacteria from 46 patients were processed using the MALDI-TOF Biotyper Sepsityper for identification directly from the blood and the SLIC instrument for susceptibility testing. All organisms were also tested using the current standard workflow used in the host laboratory. Categorical agreement (CA), major errors (MaEs) and very major errors (VMEs) were determined. Results. SLIC produced susceptibility results with a 71.9% CA, 30.6% MaE and 17.5% VME. The median difference in time to the final result was 44.14 (43 : 05-45 : 15) h earlier compared to the current method. Conclusion. We conclude that SLIC was unable to consistently provide sufficiently accurate antibiotic susceptibility results compared to the current standard method.

The reduction of antimicrobial susceptibility testing (AST) time-to-result is a central need, especially in sepsis treatment. The current automated rapid ASTs are still too expensive for many laboratories. We aimed to evaluate three pre-treatment methods for a same-day inoculation on both automated AST platforms available in our laboratory. We tested 100 Enterobacterales or staphylococci positive bottles. We obtained good results with the different methods and instruments. In particular, Vitek-2 showed good performances with Enterobacterales AST when inoculated with bacterial pellet (96.6% categorical agreement - CA-, 93.3% essential agreement - EA). Also short-term incubation colonies for staphylococci AST had acceptable CA (94.2%), even if with 77.5% EA. MicroScan system for staphylococci AST with both short-term incubation and direct blood inoculation reached >95% CA, but 92.5% and 83.6% EA, respectively. On the other hand, Enterobacterales AST showed optimal performances only with bacterial pellet inoculation (97.6% CA). In fact, direct blood inoculation showed not acceptable parameters for several molecules. Both systems allow a 24-h reduction in time-to-result, by using the same instruments of routine activity after rapid and cheap pre-treatments., Competing Interests: Declaration of competing interest None., (Copyright © 2024. Published by Elsevier B.V.)

Urinary tract infections (UTIs) represent the most prevalent type of outpatient infection, with significant adverse health and economic burdens. Current culture-based antibiotic susceptibility testing can take up to 72 h resulting in ineffective prescription of broad-spectrum antibiotics, poor clinical outcomes and development of further antibiotic resistance. We report an electrochemical lab-on-a-chip (LOC) for testing samples against seven clinically-relevant antibiotics. The LOC contained eight chambers, each housing an antibiotic-loaded hydrogel (cephalexin, ceftriaxone, colistin, gentamicin, piperacillin, trimethoprim, vancomycin) or antibiotic-free control, alongside a resazurin bulk-modified screen-printed electrode for electrochemical detection of metabolically active bacteria using differential pulse voltammetry. Antibiotic susceptibility in simulated UTI samples or donated human urine with either Escherichia coli or Klebsiella pneumoniae could be established within 85 min. Incorporating electrochemical detection onto a LOC provides an inexpensive, simple method for the sensitive determination of antibiotic susceptibility that is significantly faster than using a culture-based approach., (© 2024. The Author(s).)

Efficient tools for rapid antibiotic susceptibility testing (AST) are crucial for appropriate use of antibiotics, especially colistin, which is now often considered a last resort therapy with extremely drug resistant Gram-negative bacteria. Here, we developed a rapid, easy and miniaturized colistin susceptibility assay based on microfluidics, which allows for culture and high-throughput analysis of bacterial samples. Specifically, a simple microfluidic platform that can easily be operated was designed to encapsulate bacteria in nanoliter droplets and perform a fast and automated bacterial growth detection in 2 h, using standardized samples. Direct bright-field imaging of compartmentalized samples proved to be a faster and more accurate detection method as compared to fluorescence-based analysis. A deep learning powered approach was implemented for the sensitive detection of the growth of several strains in droplets. The DropDeepL AST method (Droplet and Deep learning-based method for AST) developed here allowed the determination of the colistin susceptibility profiles of 21 fast-growing Enterobacterales (E. coli and K. pneumoniae), including clinical isolates with different resistance mechanisms, showing 100 % categorical agreement with the reference broth microdilution (BMD) method performed simultaneously. Direct AST of bacteria in urine samples on chip also provided accurate results in 2 h, without the need of complex sample preparation procedures. This method can easily be implemented in clinical microbiology laboratories, and has the potential to be adapted to a variety of antibiotics, especially for last-line antibiotics to optimize treatment of patients infected with multi-drug resistant strains., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Purpose: This study compared the results of the new Sysmex PA-100 AST System, a point-of-care analyser, with routine microbiology for the detection of urinary tract infections (UTI) and performance of antimicrobial susceptibility tests (AST) directly from urine., Methods: Native urine samples from 278 female patients with suspected uncomplicated UTI were tested in the Sysmex PA-100 and with reference methods of routine microbiology: urine culture for bacteriuria and disc diffusion for AST., Results: The analyser delivered bacteriuria results in 15 min and AST results within 45 min. Sensitivity and specificity for detection of microbiologically confirmed bacteriuria were 84.0% (89/106; 95% CI: 75.6-90.4%) and 99.4% (155/156; 95% CI: 96.5-100%), respectively, for bacterial species within the analyser specifications. These are Escherichia coli, Klebsiella pneumoniae, Proteus mirabilis, Enterococcus faecalis and Staphylococcus saprophyticus, which are common species causing uncomplicated UTI. Overall categorical agreement (OCA) for AST results for the five antimicrobials tested in the Sysmex PA-100 (amoxicillin/clavulanic acid, ciprofloxacin, fosfomycin, nitrofurantoin and trimethoprim) ranged from 85.4% (70/82; 95%CI: 75.9-92.2%) for ciprofloxacin to 96.4% (81/84; 95% CI: 89.9-99.3%) for trimethoprim. The Sysmex PA-100 provided an optimal treatment recommendation in 218/278 cases (78.4%), against 162/278 (58.3%) of clinical decisions., Conclusion: This first clinical evaluation of the Sysmex PA-100 in a near-patient setting demonstrated that the analyser delivers phenotypic AST results within 45 min, which could enable rapid initiation of the correct targeted treatment with no further adjustment needed. The Sysmex PA-100 has the potential to significantly reduce ineffective or unnecessary antibiotic prescription in patients with UTI symptoms., (© 2024. The Author(s).)

Treatment assessment and patient outcome for sepsis depend predominantly on the timely administration of appropriate antibiotics 1-3 . However, the clinical protocols used to stratify and select patient-specific optimal therapy are extremely slow 4 . In particular, the major hurdle in performing rapid antimicrobial susceptibility testing (AST) remains in the lengthy blood culture procedure, which has long been considered unavoidable due to the limited number of pathogens present in the patient's blood. Here we describe an ultra-rapid AST method that bypasses the need for traditional blood culture, thereby demonstrating potential to reduce the turnaround time of reporting drug susceptibility profiles by more than 40-60 h compared with hospital AST workflows. Introducing a synthetic beta-2-glycoprotein I peptide, a broad range of microbial pathogens are selectively recovered from whole blood, subjected to species identification or instantly proliferated and phenotypically evaluated for various drug conditions using a low-inoculum AST chip. The platform was clinically evaluated by the enrolment of 190 hospitalized patients suspected of having infection, achieving 100% match in species identification. Among the eight positive cases, six clinical isolates were retrospectively tested for AST showing an overall categorical agreement of 94.90% with an average theoretical turnaround time of 13 ± 2.53 h starting from initial blood processing., (© 2024. The Author(s), under exclusive licence to Springer Nature Limited.)

The escalation of antimicrobial resistance (AMR) due to the excessive and inappropriate use of antimicrobials has prompted the urgent need for more rapid and effective antimicrobial susceptibility testing (AST) methods. Conventional AST techniques often take 16-24 h, leading to empirical prescription practices and the potential emergence of AMR. The study aimed to develop a rapid disk diffusion (RDD) method utilizing laser speckle formation (LSF) technology to expedite AST results. The study aimed to evaluate the performance of LSF technology in determining antimicrobial susceptibility. In this study, preclinical and clinical settings were established to compare the LSF technology with conventional disk diffusion (DD) methods to measure the inhibition zones. Preclinical experiments with different bacterial strains demonstrated more than 70% categorical agreement (CA) against most antimicrobials. Further, clinical experiments with multiple strains and antibiotics revealed CA ranging from 40 to 79%, while major and minor discrepancies were observed around 30% and 11%, respectively. These observations revealed high concordance between RDD and DD for multiple antimicrobials in multiple species. The results underscore the potential of RDD-based LSF technology for hastening AST procedures. The current study is marked by a unique equipment setup and analysis approach. Collectively, the suggested laser-based RDD showed greater potential than previously developed comparable methods. The proposed method and design have a higher application potential than formerly developed similar technologies. Together, the study contributes to the ongoing development of rapid AST methods., (© 2024. The Author(s).)

Background: Tuberculosis (TB) is caused due to the infection of Mycobacterium tuberculosis (MTB) and it can infect the various parts of the human body. The disease is highly prevalent and is the second most common cause of death worldwide after COVID-19. Apart from sputum specimen, it is exceedingly difficult to diagnose due to its paucibacillary nature. The current study was intended to evaluate the accuracy of Smart Sure™ MTB and multidrug-resistant-TB (MDR-TB) kits (Genetix Biotech Asia Pvt. Ltd., India) with Xpert ultra and Mycobacterium growth indicator tube (MGIT) culture on nonsputum specimens from TB suspects., Methods: A total of 205 nonsputum specimens were received between October 2023 and May 2024 at Intermediate Reference Laboratory, Department of Medicine, All India Institute of Medical Sciences, New Delhi, India. Xpert ultra and Smart Sure™ MTB and MDR-TB tests were done directly on samples. However, processed specimens were used for MGIT culture and drug-susceptibility testing (DST). Invalid and MGIT contaminated specimens were excluded from the final calculation., Results: Overall, sensitivity and specificity of Smart Sure™ MTB screening kit was 71.59% and 98.28%, respectively, with Xpert ultra and 68.35% and 90.83%, respectively, with MGIT culture. While comparing with both Xpert ultra and MGIT-DST to detect rifampicin (RIF) resistant, Smart Sure™ MDR-TB kits showed sensitivity of 75.0% and 100% of specificity. However, for isoniazid (INH) resistance, Smart Sure™ MDR-TB kits showed 100% of sensitivity and specificity with MGIT-DST., Conclusion: For the detection of MTB and its drug-resistance patterns (RIF and INH) in the specimens other than sputum, Smart Sure™ MTB and MDR-TB kits could play a vital role in TB endemic countries. While comparing the set-ups and skilled staffs, it required almost same as compared with previously approved WHO diagnostics used in resource-limited countries., (Copyright © 2024 Copyright: © 2024 International Journal of Mycobacteriology.)

Background: Rapid antimicrobial susceptibility testing (AST) is urgently needed to provide safer treatment to counteract antimicrobial resistance. This is critical in septic patients, because resistance increases empiric therapy uncertainty and the risk of a poor outcome. We validate a novel 2h flow cytometry AST assay directly from positive blood cultures (PBC) by using a room temperature stable FASTgramneg and FASTgrampos kits (FASTinov® Porto, Portugal) in three sites: FASTinov (site-1), Hospital Ramon y Cajal, Madrid, Spain (site-2) and Centro Hospitalar S. João, Porto, Portugal (site-3). A total of 670 PBC were included: 333 spiked (site-1) and 337 clinical PBC (151 site-2 and 186 site-3): 367 gram-negative and 303 gram-positive. Manufacturer instructions were followed for sample preparation, panel inoculation, incubation (1h/37ºC) and flow cytometry analysis using CytoFlex (Site-1 and -2) or DxFlex (site-3) both instruments from Beckman-Coulter, USA., Results: A proprietary software (bioFAST) was used to immediately generate a susceptibility report in less than 2 h. In parallel, samples were processed according to reference AST methods (disk diffusion and/or microdilution) and interpreted with EUCAST and CLSI criteria. Additionally, ten samples were spiked in all sites for inter-laboratory reproducibility. Sensitivity and specificity were >95% for all antimicrobials. Reproducibility was 96.8%/95.0% for FASTgramneg and 95.1%/95.1% for FASTgrampos regarding EUCAST/CLSI criteria, respectively., Conclusion: FASTinov® kits consistently provide ultra-rapid AST in 2h with high accuracy and reproducibility on both Gram-negative and Gram-positive bacteria. This technology creates a new paradigm in bacterial infection management and holds the potential to significantly impact septic patient outcomes and antimicrobial stewardship., (© 2024. The Author(s).)

Antibiotic susceptibility testing (AST) is a routine procedure in diagnostic laboratories to determine pathogen resistance profiles toward antibiotics. The need for fast and accurate resistance results is rapidly increasing with a global rise in pathogen antibiotic resistance over the past years. Microfluidic technologies can enable AST with lower volumes, lower cell numbers, and a reduction in the sample-to-result time compared to state-of-the-art systems. We present a protocol to perform AST on a miniaturized nanoliter chamber array platform. The chambers are filled with antibiotic compounds and oxygen-sensing nanoprobes that serve as a viability indicator. The growth of bacterial cells in the presence of different concentrations of antibiotics is monitored; living cells consume oxygen, which can be observed as an increase of a luminesce signal within the growth chambers. Here, we demonstrate the technique using a quality control Escherichia coli strain, ATCC 35218. The AST requires 20 μL of a diluted bacterial suspension (OD 600  = 0.02) and provides resistance profiles about 2-3 h after the inoculation. The microfluidic method can be adapted to other aerobic pathogens and is of particular interest for slow-growing strains., (© 2024. The Author(s), under exclusive license to Springer Science+Business Media, LLC, part of Springer Nature.)

Success in the global fight against antimicrobial resistance (AMR) is likely to improve if surveillance can be performed on an epidemiological scale. An approach based on agars with incorporated antimicrobials has enormous potential to achieve this. However, there is a need to identify the combinations of selective agars and key antimicrobials yielding the most accurate counts of susceptible and resistant organisms. A series of experiments involving 1,202 plates identified the best candidate combinations from six commercially available agars and five antimicrobials, using 18 Escherichia coli strains as either pure cultures or inocula-spiked feces. The effects of various design factors on colony counts were analyzed in generalized linear models. Without antimicrobials, Brilliance E. coli and CHROMagar ECC agars yielded 28.9% and 23.5% more colonies, respectively, than MacConkey agar. The order of superiority of agars remained unchanged when fecal samples with or without spiking of resistant E. coli strains were inoculated onto agars with or without specific antimicrobials. When antimicrobials were incorporated at various concentrations, it was revealed that ampicillin, tetracycline, and ciprofloxacin were suitable for incorporation into Brilliance and CHROMagar agars at all defined concentrations. Gentamicin was suitable for incorporation only at 8 and 16 μg/ml, while ceftiofur was suitable only at 1 μg/ml. CHROMagar extended-spectrum β-lactamase (ESBL) agar supported growth of a wider diversity of extended-spectrum-cephalosporin-resistant E. coli strains. The findings demonstrate the potential for agars with incorporated antimicrobials to be combined with laboratory-based robotics to deliver AMR surveillance on a vast scale with greater sensitivity of detection and strategic relevance. IMPORTANCE Established models of surveillance for AMR in livestock typically have a low sampling intensity, which creates a tremendous barrier to understanding the variation of resistance among animal and food enterprises. However, developments in laboratory robotics now make it possible to rapidly and affordably process large volumes of samples. Combined with modern selective agars incorporating antimicrobials, this forms the basis of a novel surveillance process for identifying resistant bacteria by chromogenic reactions, including accurately detecting and quantifying the presence of bacteria even when they are present at low concentrations. Because Escherichia coli is a widely preferred indicator bacterium for AMR surveillance, this study identifies the optimal selective agar for quantifying resistant E. coli strains by assessing the growth performance on agars with antimicrobials. The findings are the first step toward exploiting laboratory robotics in an up-scaled approach to AMR surveillance in livestock, with wider adaptations in food, clinical microbiology, and public health.

Antimicrobial resistance surveillance data is lacking from many resource-limited settings mainly due to limited laboratory testing. Novel culture systems may address some of the limitations of conventional culture media and expand the availability of microbiology services. The aims of this study were to evaluate the performance of InTray COLOREX Screen/ESBL and Compact Dry for the detection of uropathogens and of extended-spectrum beta-lactamase (ESBL)-producing organisms from urine samples. Urines samples were collected from patients presenting with symptoms of urinary tract infection to primary care clinics in Harare. Performance of the InTray COLOREX Screen, ESBL and Compact Dry chromogenic media were compared to the reference of culture using Brilliance UTI agar and conventional antimicrobial susceptibility testing. A total of 414 samples were included in the analysis. Of the included samples, 98 were positive on Brilliance UTI agar and 83 grew Enterobacterales. The sensitivities and specificities for Enterobacterales were 89.2% (95% CI 80.4-94.9) and 98.2% (95% CI 96.1-99.3) for InTray Screen and 95.2% (95% CI 88.1-98.7) and 99.7% (95% CI 98.3-100) for Compact Dry. Extended-spectrum beta-lactamases were present in 22 isolates from the Brilliance UTI agar. The sensitivity of the InTray COLOREX ESBL culture plates for the detection of ESBL-producing organisms was 95.5% (95% CI 77.2-99.9) and specificity was 99.5% (95% CI 98.2-99.9%). Our findings show good performance of the novel culture systems for the detection of uropathogens and ESBL-producing organisms. Both systems have several advantages over conventional media and have the potential to expand and decentralize laboratory testing., (© 2021. The Author(s).)

The industrial version of SuperCAZ/AVI® medium developed for screening CAZ/AVI resistant Gram-negative isolates has been evaluated here using a collection of 87 well-characterized clinical isolates of worldwide origin. In addition, testing was performed by spiking stools with a series of resistant and susceptible isolates. In those conditions, the SuperCAZ/AVI® medium exhibited a sensitivity and specificity of 100 %, down to the lower limit of detection of 10 1 to 10 2 CFU/ml. The SuperCAZ/AVI® medium is a sensitive and specific screening medium for detection of CZA-resistant bacteria regardless of their resistance mechanisms., Competing Interests: Declaration of Competing Interest All authors have nothing to declare., (Copyright © 2021 The Author(s). Published by Elsevier Inc. All rights reserved.)

Gepotidacin is a triazaacenaphthylene antibiotic with activity against Neisseria gonorrhoeae including strains resistant to current agents. We tested 145 N. gonorrhoeae isolates by agar dilution according to Gonococcal Isolate Surveillance Program and Clinical and Laboratory Standards Institute methodologies. Gepotidacin demonstrated a minimum inhibitory concentration (MIC) 50 of 0.25 μg/mL and a MIC 90 of 0.5 μg/mL (highest gepotidacin MIC was 1 μg/mL) against the 145 N. gonorrhoeae isolates tested. We also assessed the impact of test variables on antimicrobial susceptibility test results for gepotidacin, ciprofloxacin, and ceftriaxone against 10 N. gonorrhoeae isolates. Media type had the biggest effect but wasn't specific to gepotidacin. Gepotidacin MICs were also affected by inoculum, pH, and 10% CO 2 . These in vitro data indicate that further study of gepotidacin is warranted for potential use in treating gonorrhea infections and highlight the importance of controlling for media type, inoculum, CO 2 , and pH when performing MIC testing with gepotidacin., (Copyright © 2021 GlaxoSmithKline plc. Published by Elsevier Inc. All rights reserved.)