Search

Strong coupling between a single quantum emitter and an optical cavity (at rate Ω) accesses fundamental quantum optics and provides an essential building block for photonic quantum technologies. However, the minimum mode volume of conventional dielectric cavities restricts their operation to cryogenic temperature for strong coupling. Here we harness surface self-assembly to make deterministic strong coupling at room temperature using CdSe/CdS quantum dots (QDs) in nanoparticle-on-mirror (NPoM) plasmonic nanocavities. We achieve a fabrication yield of ~70% for single QD strong coupling by optimizing their size and nano-assembly. A clear and reliable Rabi splitting is observed both in the scattering of each nanocavity and their photoluminescence, which are however not equal. Integrating these quantum elements with electrical pumping allows demonstration of strong coupling in their electroluminescence. This advance provides a straightforward way to achieve practical quantum devices at room temperature, and opens up exploration of their nonlinear, electrical, and quantum correlation properties. A bright pure quantum light source is essential for photonic circuit quantum technologies. Here, authors develop a route to consistently couple single quantum dots into plasmonic nanocavities at high yield, achieving strong coupling at room temperature and electrically pumped devices. [ABSTRACT FROM AUTHOR]

Electron tomography has become a commonly used tool to investigate the three-dimensional (3D) structure of nanomaterials, including colloidal nanoparticle assemblies. However, electron microscopy is typically done under high-vacuum conditions, requiring sample preparation for assemblies obtained by wet colloid chemistry methods. This involves solvent evaporation and deposition on a solid support, which consistently alters the nanoparticle organization. Here, we suggest using electron tomography to study nanoparticle assemblies in their original colloidal liquid environment. To address the challenges related to electron tomography in liquid, we devise a method that combines fast data acquisition in a commercial liquid-cell with a dedicated alignment and reconstruction workflow. We present the advantages of this methodology in accurately characterizing two different systems. 3D reconstructions of assemblies comprising polystyrene-capped Au nanoparticles encapsulated in polymeric shells reveal less compact and more distorted configurations for experiments performed in a liquid medium compared to their dried counterparts. A similar expansion can be observed in quantitative analysis of the surface-to-surface distances of self-assembled Au nanorods in water rather than in a vacuum, in agreement with bulk measurements. This study, therefore, emphasizes the importance of developing high-resolution characterization tools that preserve the native environment of colloidal nanostructures. Drying force-induced deformation complicates the characterization of the 3D structure of colloidal assemblies. Here, the authors develop a liquid electron tomography method for unravelling the 3D structures of small colloidal assemblies under native conditions. [ABSTRACT FROM AUTHOR]

Handedness is an essential attribute of chiral nanocrystals, having a major influence on their properties. During chemical growth, the handedness of nanocrystals is usually tuned by selecting the corresponding enantiomer of chiral molecules involved in asymmetric growth, often known as chiral inducers. We report that, even using the same chiral inducer enantiomer, the handedness of chiral gold nanocrystals can be reversed by using Au nanorod seeds with either single crystalline or pentatwinned structure. This effect holds for chiral growth induced both by amino acids and by chiral micelles. Although it was challenging to discern the morphological handedness for L‐cystine‐directed particles, even using electron tomography, both cases showed circular dichroism bands of opposite sign, with nearly mirrored chiroptical signatures for chiral micelle‐directed growth, along with quasi‐helical wrinkles of inverted handedness. These results expand the chiral growth toolbox with an effect that might be exploited to yield a host of interesting morphologies with tunable optical properties. [ABSTRACT FROM AUTHOR]

4D printing is the 3D printing of objects that change chemically or physically in response to an external stimulus over time. Photothermally responsive shape memory materials are attractive for their ability to undergo remote activation. While photothermal methods using gold nanorods (AuNRs) are used for shape recovery, 3D patterning of these materials into objects with complex geometries using degradable materials is not addressed. Here, the fabrication of 3D printed shape memory bioplastics with photo‐activated shape recovery is reported. Protein‐based nanocomposites based on bovine serum albumin (BSA), poly (ethylene glycol) diacrylate (PEGDA), and AuNRs are developed for vat photopolymerization. These 3D printed bioplastics are mechanically deformed under high loads, and the proteins served as mechano‐active elements that unfolded in an energy‐dissipating mechanism that prevented fracture of the thermoset. The bioplastic object maintained its metastable shape‐programmed state under ambient conditions. Subsequently, up to 99% shape recovery is achieved within 1 min of irradiation with near‐infrared (NIR) light. Mechanical characterization and small angle X‐ray scattering (SAXS) analysis suggest that the proteins mechanically unfold during the shape programming step and may refold during shape recovery. These composites are promising materials for the fabrication of biodegradable shape‐morphing devices for robotics and medicine. [ABSTRACT FROM AUTHOR]