Search

Previous studies have reported the development of a taste sensor using a surface modification approach to evaluate umami taste, specifically substances like monosodium L-glutamate (MSG) and monosodium L-aspartate. The sensor was modified with 2,6-dihydroxyterephthalic acid (2,6-DHTA). However, the mechanism underlying umami substance detection in the 2,6-DHTA- treated sensor remains unidentified, as does whether the specific detection is due to an intermolecular interaction between the modifier and the analyte. In this study, 1H-NMR measurements were conducted for a variety of modifiers and analytes in terms of structures, along with taste sensor measurements. By comparing the 1H-NMR spectra and the results of the taste sensor, we suggested that both modifiers and analytes need to meet certain molecular structure conditions to produce intermolecular interactions. The modifier needs to possess intramolecular H-bonds and have carboxyl groups in the para position of the benzene ring, i.e., two carboxyl groups. In conclusion, we validated that the response mechanism of the taste sensor for umami substance measurement proposed in previous studies is reasonable and predicted the binding form of 2,6-DHTA and MSG.

Taste sensors with an allostery approach have been studied to detect non-charged bitter substances, such as xanthine derivatives, used in foods (e.g., caffeine) or pharmaceuticals (e.g., etofylline). In this study, the authors modified a taste sensor with 3-bromo-2,6-dihydroxybenzoic acid and used it in conjunction with sensory tests to assess the bitterness of non-charged pharmaceuticals with xanthine scaffolds (i.e., acefylline and doxofylline), as well as allopurinol, an analogue of hypoxanthine. The results show that the sensor was able to differentiate between different levels of sample bitterness. For instance, when assessing a 30 mM sample solution, the sensor response to acefylline was 34.24 mV, which corresponded to the highest level of bitterness (τ = 3.50), while the response to allopurinol was lowest at 2.72 mV, corresponding to relatively weaker bitterness (τ = 0.50). Additionally, this study extended the application of the sensor to detect pentoxifylline, an active pharmaceutical ingredient in pediatric medicines. These results underscore the taste sensor’s value as an additional tool for early-stage assessment and prediction of bitterness in non-charged pharmaceuticals.

Molecular dynamics simulations and functional assays of the transmembrane domain of the sweet taste receptor subunit, TAS1R3 reveal mechanisms on the allostery of sweet receptor activation or inactivation and pH-dependent sensitivity to saccharin.

A taste sensor employs various lipid/polymer membranes with specific physicochemical properties for taste classification and evaluation. However, phosphoric acid di(2-ethylhexyl) ester (PAEE), employed as one of the lipids for the taste sensors, exhibits insufficient selectivity for umami substances. The pH of sample solutions impacts the dissociation of lipids to influence the membrane potential, and the response to astringent substances makes accurate measurement of umami taste difficult. This study aims to develop a novel taste sensor for detecting umami substances like monosodium L-glutamate (MSG) through surface modification, i.e., a methodology previously applied to taste sensors for non-charged bitter substance measurement. Four kinds of modifiers were tested as membrane-modifying materials. By comparing the results obtained from these modifiers, the modifier structure suitable for measuring umami substances was identified. The findings revealed that the presence of carboxyl groups at para-position of the benzene ring, as well as intramolecular H-bonds between the carboxyl group and hydroxyl group, significantly affect the effectiveness of a modifier in the umami substance measurement. The taste sensor treated with this type of modifier showed excellent selectivity for umami substances.

Currently, taste sensors utilizing lipid polymer membranes are utilized to assess the taste of food products quantitatively. During this process, it is crucial to identify and quantify basic tastes, e.g., sourness and sweetness, while ensuring that there is no response to tasteless substances. For instance, suppression of responses to anions, like tasteless NO3− ions contained in vegetables, is essential. However, systematic electrochemical investigations have not been made to achieve this goal. In this study, we fabricated three positively charged lipid polymer membranes containing oleylamine (OAm), trioctylemethylammonium chloride (TOMACl), or tetradodecylammonium bromide (TDAB) as lipids, and sensors that consist of these membranes to investigate the potential change characteristics of these sensors in solutions containing different anions (F−, Cl−, Br−, NO3−, I−). The ability of each anion solution to reduce the positive charge on membranes and shift the membrane potential in the negative direction was in the following order: I− > NO3− > Br− > Cl− > F−. This order well reflected the order of size of the hydrated ions, related to their hydration energy. Additionally, the OAm sensor displayed low ion selectivity, whereas the TOMACl and TDAB sensors showed high ion selectivity related to the OAm sensor. Such features in ion selectivity are suggested to be due to the variation in positive charge with the pH of the environment and packing density of the OAm molecule in the case of the OAm sensor and due to the strong and constant positive charge created by complete ionization of lipids in the case of TOMACl and TDAB sensors. Furthermore, it was revealed that the ion selectivity varies by changing the lipid concentration in each membrane. These results contribute to developing sensor membranes that respond to different anion species selectively and creating taste sensors capable of suppressing responses to tasteless anions.

The saltiness enhancement effect can be produced by adding specific substances to dietary salt (sodium chloride). This effect has been used in salt-reduced food to help people forge healthy eating habits. Therefore, it is necessary to objectively evaluate the saltiness of food based on this effect. In a previous study, sensor electrodes based on lipid/polymer membrane with Na+ ionophore have been proposed to quantify the saltiness enhanced by branched-chain amino acids (BCAAs), citric acid, and tartaric acid. In this study, we developed a new saltiness sensor with the lipid/polymer membrane to quantify the saltiness enhancement effect of quinine by replacing a lipid that caused an unexpected initial drop in the previous study with another new lipid. As a result, the concentrations of lipid and ionophore were optimized to produce an expected response. Logarithmic responses have been found on both NaCl samples and quinine-added NaCl samples. The findings indicate the usage of lipid/polymer membranes on novel taste sensors to evaluate the saltiness enhancement effect accurately.

The use of taste sensors with lipid/polymer membranes is one of the methods to evaluate taste. As previously reported, taste sensors can detect non-charged substances such as caffeine by modifying the lipid/polymer membranes with hydroxybenzoic acids (HBAs). The mechanism of caffeine detection by taste sensors was identified to be an allosteric one. Generally, the allosteric mechanism, defined as “regulation at distant sites”, is used to describe the regulation process for proteins. In this study, to improve the sensitivity of taste sensors to caffeine and its analogs using the allosteric mechanism, we used various modifiers of lipid/polymer membranes, and we detected caffeine using taste sensors with the modified membranes. The detection of the caffeine analogs theophylline and theobromine was also analyzed. The results of caffeine detection clarified that the molecular structure underlying the allosteric mechanism capable of effective caffeine detection involves both the carboxyl and hydroxyl groups, where the hydroxyl group can form intermolecular H bonds with caffeine. Furthermore, the taste sensors with a modifier, which has the molecular structure underlying the allosteric mechanism, showed high sensitivity to caffeine and caffeine analogs. The use of an allosteric mechanism may help improve the sensitivity of taste sensors to other non-charged pharmaceutical substances, such as dexamethasone and prednisolone, in the future.

Nowadays, the utilization of a taste sensor with lipid/polymer membranes is one of the most accurate and objective ways to evaluate the tastes of solutions. However, it has been difficult to evaluate uncharged sweet substances, such as sucrose, because the conventional taste sensor uses the potentiometric measurement, which is mainly based on changes in the surface electric charge density of the membrane. Previous studies have reported that a sweetness sensor called GL1 can evaluate the sweetness of sugars and sugar alcohols, and is commercially available for food, beverage, and pharmaceutical industries. However, the response mechanism of GL1 has not been fully elucidated. In this study, we focus on clarifying the effect of concentrations and types of metal ions in the conditioning solution on the response mechanism of the sweetness sensor GL1. Moreover, according to the different concentrations and types of metal ions in conditioning solutions, the complex formation and the hydrated radius were considered to influence the membrane potential measured in a reference solution and the sensor responses. The purpose of this study is to elucidate the response mechanism and improve the selectivity and sensitivity of the sweetness sensor.

A taste sensor with lipid/polymer membranes is attracting attention as a method to evaluate taste objectively. However, due to the characteristic of detecting taste by changes in membrane potential, taste sensors cannot measure non-charged bitter substances. Many foods and medicines contain non-charged bitter substances, and it is necessary to quantify these tastes with sensors. Therefore, we have been developing taste sensors to detect bitter tastes caused by non-charged substances such as caffeine. In previous studies, a sensor for detecting bitterness caused by caffeine and theobromine, theophylline, was developed, using a membrane modified with hydroxybenzoic acid (HBA) as the sensing part. The sensor was designed to form intramolecular hydrogen bonds (H-bonds) between the hydroxy group and carboxy group of HBA and to successively cause the intermolecular H-bonds between HBA and caffeine molecules to be measured. However, whether this sensing principle is correct or not cannot be confirmed from the results of taste sensor measurements. Therefore, in this study, we explored the interaction between HBA and caffeine by 1H-nuclear magnetic resonance spectroscopy (NMR). By the 1H NMR detection, we confirmed that both the substances interact with each other. Furthermore, the nuclear Overhauser effect (NOE) of intermolecular spatial conformation in solution was measured, by which 2,6-dihydroxybenzoic acid (2,6-DHBA) preferably interacted with caffeine via the H-bonding and stacking configuration between aromatic rings. Identifying the binding form of 2,6-DHBA to caffeine was estimated to predict how the two substances interact.

A taste sensor with lipid/polymer membranes can objectively evaluate taste. As previously reported, caffeine can be detected electrically using lipid/polymer membranes modified with hydroxybenzoic acids (HBAs). However, a systematic understanding of how HBAs contribute to caffeine detection is still lacking. In this study, we used various HBAs such as 2,6–dihydroxybenzoic acid (2,6–DHBA) to modify lipid/polymer membranes, and we detected caffeine using a taste sensor with the modified membranes. The effect of the concentrations of the HBAs on caffeine detection was also discussed. The results of the caffeine detection indicated that the response to caffeine and the reference potential measured in a reference solution were affected by the log P and pKa of HBAs. Furthermore, the taste sensor displayed high sensitivity to caffeine when the reference potential was adjusted to an appropriate range by modification with 2,6–DHBA, where the slope of the change in reference potential with increasing 2,6–DHBA concentration was steep. This is helpful in order to improve the sensitivity of taste sensors to other taste substances, such as theophylline and theobromine, in the future.

The lipid phosphoric acid di-n-decyl ester (PADE) has played an important role in the development of taste sensors. As previously reported, however, the concentration of PADE and pH of the solution affected the dissociation of H+, which made the measurement results less accurate and stable. In addition, PADE caused deterioration in the response to bitterness because PADE created the acidic environment in the membrane. To solve these problems, our past study tried to replace the PADE with a completely dissociated substance called tetrakis [3,5-bis (trifluoromethyl) phenyl] borate sodium salt dehydrate (TFPB) as lipid. To find out whether the two substances can be effectively replaced, it is necessary to perform an in-depth study on the properties of the two membranes themselves. In this study, we fabricated two types of membrane electrodes, based on PADE or TFPB, respectively, using 2-nitrophenyl octyl ether (NPOE) as a plasticizer. We measured the selectivity to cations such as Cs+, K+, Na+ and Li+, and also the membrane impedance of the membranes comprising PADE or TFPB of the different concentrations. As a result, we found that any concentration of PADE membranes always had low ion selectivity, while the ion selectivity of TFPB membranes was concentration-dependent, showing increasing ion selectivity with the TFPB concentrations. The ion selectivity order was Cs+>K+>Na+>Li+. The hydration of ions was considered to participate in this phenomenon. In addition, the membrane impedance decreased with increasing PADE and TFPB concentrations, while the magnitudes differed, implying that there is a difference in the dissociation of the two substances. The obtained results will contribute to the development of novel receptive membranes of taste sensors.

An odor sensing system with chemosensitive resistors was used to identify the gases generated from overheated cables to prevent fire. Three different electric cables for a distribution cabinet were used. The cables had an insulation layer made of polyvinyl chloride (PVC) or cross-linked polyethylene (XLPE). The heat resistance of the cables was tested by differential thermal and thermogravimetric analyses. The thermal decomposition products of the cables were investigated by gas chromatography-mass spectrometry (GC-MS). For the odor sensing system, two types of 16-channel array were used to detect the generated gases. One contains high-polarity GC stationary phase materials and the other contains GC stationary phase materials of high to low polarity. The system could distinguish among three cable samples at 270 °C with an accuracy of about 75% through both arrays trained with machine learning. Furthermore, the system could achieve a recall rate of 90% and a precision rate of 70% when the abnormal temperature was set above the cables’ allowable conductor temperature at 130 °C. The odor sensing system could effectively detect the abnormal heating of the cables before the occurrence of fire. Therefore, it is helpful for fire prediction and detection systems in factories and substations.

In this paper, we discuss and utilize the multiple-reflection attenuated total reflectance (ATR) method of near-infrared spectroscopy (NIRS) for the determination of glycogen content in Japanese wagyu beef. We have also conducted experiments on diffuse reflection to compare the experimental results. Glycogen, as a reservoir of glucose units, has a positive effect on the palatability of wagyu beef. The obtained nontreated spectra were preprocessed by several different methods, then a calibration and prediction model between spectral data and glycogen content was developed by partial least squares regression (PLSR). We found that when the multiple-reflection ATR method and the diffuse reflection method are used for NIR spectroscopy methods, there is a significant difference in their ability to predict the glycogen content in wagyu beef. The determination coefficient of the best prediction model for the spectra obtained by the multiple-reflection ATR method was 0.72 for the measurement of glycogen content in wagyu beef, whereas that obtained by the diffuse reflection method was only 0.29. Through experiments and data analysis, we found that the multiple-reflection ATR method is promising for predicting glycogen content in wagyu beef. The results of these experiments have important implications for the development of future small portable beef glycogen sensors. [ABSTRACT FROM AUTHOR]