Search

In recent years, with the advent of a super-aged society, lifelong dental care has gained increasing emphasis, and implant therapy for patients with an edentulous jaw has become a significant option. However, for implant therapy to be suitable for elderly patients with reduced regenerative and immunological capabilities, higher osteoconductive and antimicrobial properties are required on the implant surfaces. Silicon nitride, a non-oxide ceramic known for its excellent mechanical properties and biocompatibility, has demonstrated high potential for inducing hard tissue differentiation and exhibiting antibacterial properties. In this study, silicon nitride was deposited on pure titanium metal surfaces and evaluated for its biocompatibility and antibacterial properties. The findings indicate that silicon nitride improves the hydrophilicity of the material surface, enhancing the initial adhesion of rat bone marrow cells and promoting hard tissue differentiation. Additionally, the antibacterial properties were assessed using Staphylococcus aureus, revealing that the silicon nitride-coated surfaces exhibited significant antibacterial activity. Importantly, no cytotoxicity was observed, suggesting that silicon nitride-coated titanium could serve as a novel implant material. [ABSTRACT FROM AUTHOR]

In a previous study, we successfully coated hydroxyapatite (HAp) onto titanium (Ti) plates using the erbium-doped yttrium aluminum garnet pulsed-laser deposition (Er:YAG-PLD) method. In this study, we performed further experiments to validate the in vitro osteogenic properties, macrophage polarization, and in vivo osseointegration activity of HAp-coated Ti (HAp-Ti) plates and screws. Briefly, we coated a HAp film onto the surfaces of Ti plates and screws via Er:YAG-PLD. The surface morphological, elemental, and crystallographic analyses confirmed the successful surface coating. The macrophage polarization and osteogenic induction were evaluated in macrophages and rat bone marrow mesenchymal stem cells, and the in vivo osteogenic properties were studied. The results showed that needle-shaped nano-HAp promoted the early expression of osteogenic and immunogenic genes in the macrophages and induced excellent M2 polarization properties. The calcium deposition and osteocalcin production were significantly higher in the HAp-Ti than in the uncoated Ti. The implantation into rat femurs revealed that the HAp-coated materials had superior osteoinductive and osseointegration activities compared with the Ti, as assessed by microcomputed tomography and histology. Thus, HAp film on sandblasted Ti plates and screws via Er:YAG-PLD enhances hard-tissue differentiation, macrophage polarization, and new bone formation in tissues surrounding implants both in vitro and in vivo. [ABSTRACT FROM AUTHOR]

Purpose: To perform vertical bone augmentation on rat parietal bone by coating the inner surface of dense polytetrafluoroethylene (d-PTFE) domes with hydroxyapatite (HA) using Erbium Yttrium Aluminum Garnet (Er:YAG) pulsed laser deposition in a rat model., Methods: The d-PTFE plate surface, α-tricalcium phosphate (α-TCP) coating, and HA coating were measured using scanning electron microscopy and X-ray diffraction to confirm the replacement of α-TCP with HA via high-pressure steam sterilization. The dome was glued to the center of the rat parietal bone and closed with periosteal and epithelial sutures. The rats were euthanized at 4, 8, and 12 weeks postoperatively, and the d-PTFE dome and surrounding tissues were harvested for radiological and histological evaluation., Results: In a group without HA coating (control group), a small amount of layered neosteum was observed in the d-PTFE dome. Conversely, a new balloon-shaped bone was observed in a HA-coated group (experimental group). Bone growth and number of bone beams were higher in the HA-coated group from 4 to 12 weeks postoperatively than those in the control group. However, no significant differences in bone mineral density values or bone bridge widths were observed., Conclusions: The HA coating enhanced bone augmentation without bone replacement. Histological findings indicated that the new bone comprised normal bone tissue with cartilage lumen and matrix. Therefore, our results indicate that bone augmentation with a HA coating may be mediated by endochondral ossification, a process similar to that of ectopic ossification.

Resin blocks and ceramic blocks for CAD/CAM crowns were cut into powders and separated into three particle size groups. Oxidative stress and cell viability were measured in 3T3 and FRSK cells. The results of cytotoxicity tended to be slightly higher for resin than for ceramics. The values also increased as the particle size decreased in the powders. In addition, incorporation into cells was frequently observed under SEM, suggesting that the particle size of easily incorporated dust is different among cell types. Fluorescence-activated cell sorter (FACS) showed an increase in apoptosis and a decrease in cell viability in most of the sample groups compared to the control group. Hematoxylin and eosin staining of the cells showed deep staining of the nuclei in the sample groups. It was found that oxidative stress cell viability and apoptosis appeared differently depending on the size of the particles and the type of cells.

The study was done to compare cell viability between ES-D3 and Balb/c 3T3 cells, and evaluate the difference in cell viability between these cell lines using denture-base lining materials for prosthetic dentistry. To compare the cytotoxicity, three acrylic and three silicone dental materials were used. The cell viability was examined by MTT and lactate dehydrogenase (LDH) methods. The cell viability immediately after malaxation or light irradiation was lower only for the acrylic materials in 3T3 cells, and for both silicone and acrylic materials in ES-D3 cells. However, the cell viability determined 24 h after malaxation or light irradiation by the MTT and LDH methods did not significantly differ between samples. It was observed that ES-D3 cells are more sensitive depending on the type of material. The results suggest that ES-D3 cells can be used as in vitro systems for conducting biosafety assessment to predict embryotoxicity.