Search

ZnTPY-chelated PbI2 nuclei effectively reduce the activation energy of perovskite crystallization resulting in higher conversion of PbI2 into uniform perovskite crystalline films, which ultimately improves the performance of perovskite solar cells.

The device efficiency of

Organic A′-site ligand structure plays a crucial role in the crystal growth of 2D perovskites, but the underlying mechanism has not been adequately understood. This problem is tackled by studying the influence of two isomeric A′-site ligands, linear-shaped n-butylammonium (n-BA+) and branched iso-butylammonium (iso-BA+), on 2D perovskites from precursor to device, with a combination of in situ grazing-incidence wide-angle X-ray scattering and density functional theory. It is found that branched iso-BA+, due to the lower aggregation enthalpies, tends to form large-size clusters in the precursor solution, which can act as pre-nucleation sites to expedite the crystallization of vertically oriented 2D perovskites. Furthermore, iso-BA+ is less likely to be incorporated into the MAPbI3 lattice than n-BA+, suppressing the formation of unwanted multi-oriented perovskites. These findings well explain the better device performance of 2D perovskite solar cells based on iso-BA+ and elucidate the fundamental mechanism of ligand structural impact on 2D perovskite crystallization.

Mixed-cation hybrid perovskite nanocrystal (HPNC) with high crystallinity, color purity, and tunable optical band gap offers a practical pathway toward next-generation displays. Herein, we present a two-step modified hot-injection combined with cation compositional engineering and surface treatment to synthesize high-purity Cs

Chitosan is a naturally derived biodegradable polymer with abundancy, sustainability, and ease of chemical modification. Polyurethanes are a family of elastic biocompatible polymers, and composites of polyurethanes have versatile properties and applications. Chitosan-polyurethane composites were recently developed but had insufficient strength and limited stretchability. In the current study, cellulose nanofibers (CNFs) were integrated in chitosan-polyurethane composites to prepare stretchable and anisotropic materials. A biodegradable polyurethane was first synthesized, end-capped with aldehyde to become dialdehyde polyurethane (DP) nanoparticles, and added with CNFs to prepare the DP-CNF composite crosslinker (DPF). The waterborne DPF crosslinker was then blended with chitosan solution to make polyurethane-CNF-chitosan (DPFC) composites. After blending, DPFC may form hydrogel in ~33 min at room temperature, which confirmed crosslinking. Composite films cast and dried from the blends showed good elongation (~420.2 %) at 60 °C. Anisotropic films were then generated by tension annealing with pre-strain. The annealed films with 200 % pre-strain exhibited large elastic anisotropy with ~4.9 anisotropic ratio. In situ SAXS/WAXS analyses unveiled that rearrangement and alignment of the microstructure during tension annealing accounted for the anisotropy. The anisotropic composite films had the ability to orient the growth of neural stem cells and showed the potential for biomimetic and tissue engineering applications.

Rationally utilizing and developing synthetic units is of particular significance for the design of high-performance non-fullerene small-molecule acceptors (SMAs). Here, a thieno[3,2-b]pyrrole synthetic unit was employed to develop a set of SMAs (ThPy1, ThPy2, ThPy3 and ThPy4) by changing the number or the position of the pyrrole ring in the central core based on a standard SMA of IT-4Cl, compared to which the four thieno[3,2-b]pyrrole-based acceptors exhibit bathochromic absorption and upshifted frontier orbital energy level due to the strong electron-donating ability of pyrrole. As a result, the polymer solar cells (PSCs) of the four thieno[3,2-b]pyrrole-based acceptors yield higher open-circuit voltage and lower energy loss relative to those of the IT-4Cl-based device. What is more, the ThPy3-based device achieves a power conversion efficiency (PCE) (15.3%) and an outstanding fill factor (FF) (0.771) that are superior to the IT-4Cl-based device (PCE = 12.6%, FF = 0.758). The ThPy4-based device realizes the lowest energy loss and the smallest optical band gap, and the ternary PSC device based on PM6:BTP-eC9:ThPy4 exhibits a PCE of 18.43% and a FF of 0.802. Overall, this work sheds light on the great potential of thieno[3,2-b]pyrrole-based SMAs in realizing low energy loss and high PCE. Four heteroheptacene-based acceptors using thieno[3,2-b]pyrrole building block were developed for the first time, and all the four acceptors-based devices realized high performance and low energy loss. Funding Agencies|National Key Research and Development Program of China - Ministry of Science and Technology [2019YFA0705900]; Basic and Applied Research Major Programme of Guangdong Province [2019B030302007]; National Natural Science Foundation of China [91433202]; Shenzhen Technology and Innovation Commission through Shenzhen Fundamental Research Program [JCYJ20200109140801751]; Hong Kong Innovation and Technology Commission [ITC-CNERC14SC01]; Foshan-HKUST [FSUST19-CAT0202]; Hong Kong Research Grants Council (RIF project) [R6021-18]; Hong Kong Research Grants Council (CRF project) [C6023-19G]; Hong Kong Research Grants Council (GRF project) [16310019, 16310020]

The large non-radiative recombination is the main factor that limits state-of-the-art organic solar cells (OSCs). In this work, two novel structurally similar oligomers (named 5BDTBDD and 5BDDBDT) with D-A-D-A-D and A-D-A-D-A configuration are synthesized for high-performance ternary OSCs with low energy loss. As third components, these PM6 analogue oligomers effectively suppress the non-radiative recombination in OSCs. Although the highest occupied molecular orbital (HOMO) levels of 5BDTBDD and 5BDDBDT are higher than that of PM6, the oligomers enabled ultra-high electroluminescence quantum efficiency (EQE

Structure and composition of the unilamellar vesicles (ULV) formed with catanionic surfactant of sodium dodecylsulfate (SDS) and cetyltrimethylammonium bromide (CTAB) are revealed using small-angle X-ray and neutron scattering (SAXS and SANS) and freeze-fracture-replication transmission electron microscopy (FFR-TEM). Imaging and scattering results consistently indicate a globular shape of the ULV, having a core size of 48 nm and a bilayer thickness of 32 A; the bilayer comprises a central aliphatic shell of 24 A, sandwiched by two headgroup shells, each of ca. 4 A thickness. From the zero-angle scattering intensity ratio of the SAXS and SANS data, a SDS/CTAB composition ratio of 3:4 for the ULV bilayer is deduced. Poly(oxyethylene-b-oxypropylene-b-oxyethylene) (P123), a triblock copolymer, is found to intervene into the ULV bilayer of the catanionic surfactant in solution, leading to successively enlarged complex ULV, as P123 concentration in the solution increases. The ULV of SDS/CTAB is saturated with P123-loading after a critical concertation of 0.067 mM P123; thereafter, formation and proliferation of constant-sized, P123-based core-shell micelles are observed with increase of P123 concentration. A structural model of P123-embedded ULV of the catanionic surfactant is proposed. These results suggest a capacity and limits of using the catanionic ULV as molecule carriers.

Electron donors and acceptors in organic solar cells (OSCs) shall strike a favorable vertical phase separation that acceptors and donors have sufficient contact and gradient accumulation near the cathodes and anodes, respectively. Random mixing of donors/acceptors at surface will result in charge accumulation and severe recombination for low carrier-mobility organic materials. However, it is challenging to tune the vertical distribution in bulk-heterojunction films as they are usually made from a well-mixed donor/acceptor solution. Here, for the first time, it presents with solid evidence that the commonly used 1-chloronaphthalene (CN) additive can tune the donor/acceptor vertical distribution and establish the mechanism. Different from the previous understanding that ascribed the efficiency enhancement brought by CN to the improved molecular stacking/crystallization, it is revealed that the induced vertical distribution is the dominant factor leading to the significantly increased performance. Importantly, the vertical distribution tunability is effective in various hot nonfullerene OSC systems and creates more channels for the collection of dissociated carriers at corresponding organic/electrode interfaces, which contributes the high efficiency of 18.29%. This study of the material vertical distribution and its correlation with molecular stacking offers methods for additives selection and provides insights for the understanding and construction of high-performance OSCs.

For undulator hard X-ray beamlines of a wide energy range, the beam intensity control is often needed to regulate the photon flux impinging on delicate detectors. Despite the capability of state-of-the-art X-ray pixel detectors being greatly advanced recently, the frontier undulator beamlines in synchrotron facilities often carry outstanding photon fluxes that are sometimes too high for certain measurements. Here, we report a developed protocol that allows intensity attenuation of an X-ray beam in the 4-23 keV energy range with flexible attenuation factors; a prototype is installed and tested on the 13A biological small-angle X-ray scattering beamline of the 3 GeV Taiwan Photon Source (TPS) of the National Synchrotron Radiation Research Center, Hsinchu, Taiwan. The intensity attenuation system is modified from a commercially available pneumatically actuated, vacuum-type precision X-ray attenuator of ADC ABS-300; the system provides beam attenuation factors covering 8 orders of intensity attenuation for an X-ray beam in 4-23 keV. This was achieved with selected combinations of 10 sets of metal foils comprising different thicknesses of Al, Ti, Cu, and Ta foils. A user-friendly protocol is established to automatically compare a subscribed attenuation factor with all the possible attenuation factors from the 1024 combinations of the 10 sets of foils in the X-ray energy used, and determine a set of the metal foils having a best-matched attenuation factor. Calculation of beam intensity attenuations with the selected foils is coded with Python and integrated into the Experimental Physics and Industrial Control System (EPICS). The input of an attenuation factor is done through a graphical display of the attenuator system based on the Control System Studio (CSS). The developed X-ray beam attenuation system provides a convenient and intuitive beam intensity control and has the potential to be adopted in future beamlines.

Coaxial core/shell electrospun nanofibers consisting of ferroelectric P(VDF-TrFE) and relaxor ferroelectric P(VDF-TrFE-CTFE) are tailor-made with hierarchical structures to modulate their mechanical properties with respect to their constituents. Compared with two single and the other coaxial membranes prepared in the research, the core/shell-TrFE/CTFE membrane shows a more prominent mechanical anisotropy between revolving direction (RD) and cross direction (CD) associated with improved resistance to tensile stress for the crystallite phase stability and good strength-ductility balance. This is due to the better degree of core/shell-TrFE-CTFE nanofiber alignment and the crystalline/amorphous ratio. The coupling between terpolymer P(VDF-TrFE-CTFE) and copolymer P(VDF-TrFE) is responsible for phase stabilization, comparing the core/shell-TrFE/CTFE with the pristine terpolymer. Moreover, an impressive collective deformation mechanism of a two-length scale in the core/shell composite structure is found. We apply in-situ synchrotron X-ray to resolve the two-length scale simultaneously by using the small-angle X-ray scattering to characterize the nanofibers and the wide-angle X-ray diffraction to identify the phase transformations. Our findings may serve as guidelines for the fabrication of the electrospun nanofibers used as membranes-based electroactive polymers.

The terpolymers based on indacenodithiophene dicyanindenone derivative, named as PTer-N10, PTer-N25 and PTer-N50, were designed and synthesized by incorporating naphthalenediimide derivative with 10%, 25% and 50% molar ratios as another electron-withdrawing unit, respectively. These terpolymers were used as the acceptors to prepare all-polymer solar cells (all-PSCs) with o-xylene as the solvent and 2-methylnaphthalene as the additive without any annealing treatment, which showed high power conversion efficiency (PCE). The terpolymer PTer-N25 possesses the highest light harvest, the best morphology, the highest and most balanced charge mobilities in blend film, so the all-PSC based on PM6: PTer-N25 achieved the highest PCE of 11.94%. This study indicates that ternary polymerization is an efficient strategy to obtain green-solvent processing polymeric acceptors, which can achieve high-performance all-PSCs.