Search

One of the key factors of space weather is solar flare activity, the monitoring and prediction of which is an important task of specialized dedicated groups of space experts and solar astronomers. Solar flare forecasts are based on identifying and detecting the so-called precursors, specific processes in solar activity events that occur before flares. Collecting data for space weather analysis and prediction comes down to several types of measurements performed by more than a dozen spacecraft. Ground-based observations and monitoring nowadays are becoming more or less complimentary. One of the reasons for this is the limitation of observation time with ground-based telescopes due to adverse Earth weather conditions. However, solar radio astronomy is immune to almost any weather activity, and the main question here is what new quality it can bring. Observational data accumulated in the 20th century show that solar radio bursts can be associated with flare activity. In addition, the existing network of solar radio telescopes is already well established. As an example, in this paper, we describe the possibilities of a fully steerable 32-meter radio telescope of Ventspils International Radio Astronomy Centre (VIRAC), Latvia, which can be useful for searching for new precursors of solar flares. [ABSTRACT FROM AUTHOR]

In 2019, the Event Horizon Telescope (EHT) released the first-ever image of a black hole event horizon. Astronomers are now aiming for higher angular resolutions of distant targets, like black holes, to understand more about the fundamental laws of gravity that govern our universe. To achieve this higher resolution and increased sensitivity, larger radio telescopes are needed to operate at higher frequencies and in larger quantities. Projects like the next-generation Very Large Array (ngVLA) and the Square-Kilometer Array (SKA) require building hundreds of telescopes with diameters greater than 10 ms over the next decade. This has a twofold effect. Radio telescope surfaces need to be more accurate to operate at higher frequencies, and the logistics involved in maintaining a radio telescope need to be simplified to support them properly in large quantities. Both of these problems can be solved with improved methods for surface metrology that are faster and more accurate with a higher resolution. This leads to faster and more accurate panel alignment and, therefore, a more productive observatory. In this paper, we present the use of binocular fringe projection profilometry as a solution to this problem and demonstrate it by aligning two panels on a 3-m radio telescope dish. The measurement takes only 10 min and directly delivers feedback on the tip, tilt, and piston of each panel to create the ideal reflector shape. Highlights: Current methods for measuring and aligning radio telescope dishes are insufficient for future astronomy requirements. We've developed a 3D scanning method for measuring full aperture dishes outdoors that is faster, easier, and more reliable than current methods. We demonstrated the method by aligning two panels on a 3-m dish to a high accuracy. [ABSTRACT FROM AUTHOR]

Mobile communication base stations have become ubiquitous with the popularization and development of mobile communication services. Although the Chinese government has designated a radio quiet zone (RQZ) specifically for Five-hundred-meter Aperture Spherical radio Telescope (FAST), the 4G International Mobile Telecommunications (4G-IMT) system is still heavily used to meet the communication needs around the RQZ. To assess the Electromagnetic Interference (EMI) caused by 4G-IMT base stations on the performance of FAST, this paper employs the International Telecommunication Union (ITU) deterministic radio wave propagation prediction model. The interference of 4G-IMT base stations on FAST is evaluated based on relevant parameters, such as the frequency used by both FAST and the base station, in conjunction with the FAST threshold protection requirements. The results indicate that 47.73 % of the data exceed the radio astronomy protection threshold of FAST. In addition, a field experiment was conducted to verify the accuracy of the radio wave propagation prediction method used. The root-mean-square error between the predicted value and the measured value was found to be 6.94 dB, supporting the accuracy of the predicted results. The findings of this study can help suppress interference from mobile communication services around the RQZ of FAST and optimize the electromagnetic environment around FAST. [ABSTRACT FROM AUTHOR]

The Square Kilometre Array (SKA) is the world's largest radio telescope currently under construction, and will employ elaborate signal processing to detect new pulsars, i.e. highly magnetised rotating neutron stars. This paper addresses the acceleration of demanding computations for this pulsar search on Field-Programmable Gate Arrays (FPGAs) using a new high-level design process based on OpenCL templates that is transferable to other scientific problems. The successful FPGA acceleration of large-scale scientific workloads requires custom architectures that fully exploit the parallel computing capabilities of modern reconfigurable hardware and are amenable to substantial design space exploration. OpenCL-based high-level synthesis toolchains, with their ability to express interconnected multi-kernel pipelines in a single source language, excel in this domain. However, the achievable performance strongly depends on how well the compiler can infer desirable hardware structures from the code. One key aspect to excellent performance is commonly the uninterrupted, high-bandwidth streaming of data into and through the design. This is difficult to achieve in complex designs when data order needs to be re-arranged, e.g. transposed. It is equally hard to pre-fetch and burst-load from DDR memory when reading occurs in non-trivial patterns. In this paper, we propose new approaches to these two problems that use OpenCL-based code templates. We demonstrate the practical benefits of these approaches with the acceleration of a key component in the SKA's pulsar search pipeline: the Fourier Domain Acceleration Search (FDAS) module. Using our proposed methodology, we are able to develop a more scalable FDAS accelerator architecture than previously possible. We explore its design space to eventually achieve a 10x throughput improvement over a prior, thoroughly optimised implementation in plain OpenCL. [ABSTRACT FROM AUTHOR]

This paper presents a report on the activities and the proposed action plan of the Education and Public Outreach Working Group (EPO WG) of Square Kilometre Array–India Consortium (SKAIC). Details of a set of flagship programs as well as supporting activities are presented, in consonance with the scale of India's involvement in Square Kilometre Array Observatory (SKAO), as well as the educational and science literacy contexts in the country. Ongoing independent EPO activities by some of the member institutions are also included. [ABSTRACT FROM AUTHOR]

We have developed, manufactured, and tested a new feed design for interferometric radio telescopes with "large-N, small-D" designs. Such arrays require low-cost and low-complexity feeds for mass production on reasonable timescales and budgets, and also require those feeds to be compact to minimize obstruction of the dishes, along with having ultra-wide frequency bands of operation for most current and future science goals. The feed presented in this paper modifies the exponentially tapered slot antenna (Vivaldi) and quad-ridged flared horn antenna designs by having an oversized backshort, a novel method of maintaining a small size that is well-suited for deeper dishes (f ∕ D ≤ 0. 2 5). It is made of laser cut aluminum and printed circuit boards, such that it is inexpensive (≲ 7 5 USD per feed in large-scale production) and quick to build; it has a 5:1 frequency ratio, and its size is approximately a third of its longest operating wavelength. We present the science and engineering constraints that went into design decisions, the development and optimization process, and the simulated performance. A version of this feed design was optimized and fabricated for the Canadian Hydrogen Observatory and Radio-transient Detector (CHORD) prototypes. When simulated on CHORD's very deep dishes (f ∕ D = 0. 2 1) and with CHORD's custom first-stage amplifiers, the on-sky system temperature T sys of the complete receiving system from dish to digitizer remains below 30 K over most of the 0.3–1.5 GHz band, and maintains an aperture efficiency η A between 0.4 and 0.6. The entire receiving chain operates at ambient temperature. The feed is designed to slightly under-illuminate the CHORD dishes, in order to minimize coupling between array elements and spillover. [ABSTRACT FROM AUTHOR]

Mulemba Astronomical Observatory, later known as the Mulemba Space Centre was founded in 1958 on Luanda's outskirts in Angola, then an African Portuguese colony, by the polymath Carlos Mar Bettencourt Faria. Being, from all accounts, a charming and knowledgeable individual who was mainly self taught, he managed to build several radio telescopes, a solar observing station, a state-of-the-art electronics laboratory and a satellite tracking facility. Financial support was obtained from a variety of individuals, commercial companies, public institutions and from 1971 onwards Angola's national government. Faria's ambitious plans were nevertheless always thwarted or delayed by lack of funds. In 1973 data started to be collected at the solar station but the whirlwind of 1970s politics had a decisive impact in Angola. Faria's beautiful dream effectively ended when he was assassinated at the Observatory in 1976. In this paper we recall Carlos Bettencourt Faria's life and his battle against all odds to establish a professional-level astronomical observatory in Angola. [ABSTRACT FROM AUTHOR]

The development of methods for the radio frequency interference mitigation becomes a fundamental challenge for any radio astronomy research. In this paper, we report on the development and creation of a new spectrometer designed for solar observations at the RATAN-600 radio telescope, capable of excising radio interference using a statistical algorithm based on the spectral kurtosis estimation. The implementation of the external analog interface and the operation of the digital signal processing system based on the FPGA are described. The maximum spectral resolution reached is 122 kHz in the frequency band of 1.0–3.0 GHz. The output spectrum has from 64 to 8192 frequency bins, depending on the requirements of the observer, the output rate is 120 spectra per second. The test results and the first observations of the Sun show that the research method can successfully detect and suppress interference from most of the local radio interference sources. [ABSTRACT FROM AUTHOR]

Low-frequency aperture arrays represent sensitive instruments to detect signals from radio astronomic sources situated in the universe. In Italy, the Sardinia Aperture Array Demonstrator (SAAD) consists of an ongoing project of the Italian National Institute for Astrophysics (INAF) aimed to install an aperture array constituted of 128 dual-polarized Vivaldi antennas at the Sardinia Radio Telescope (SRT) site. The originally envisaged 128 elements of SAAD were re-scoped to the 16 elements of its precursor named SADino, with the aim to quickly test the system with a digital beam-former based on the Italian Tile Processing Module (iTPM) digital back-end. A preliminary measurements campaign of radio frequency interference (RFI) was performed to survey the less contaminated spectral region. The results of these measurements permitted the establishment of the technical requirements for receiving a chain for the SADino telescope. In this paper, the design, implementation, and characterization of this signal acquisition chain are proposed. The operative frequency window of SAAD and its precursor, SADino, sweeps from 260 MHz to 420 MHz, which appears very attractive for radio astronomy applications and radar observation in space and surveillance awareness (SSA) activities. [ABSTRACT FROM AUTHOR]

The paper presents results of calculating the RATAN-600 beam pattern (BP) and BP drift scans of point radio sources in the West Sector radio telescope operation mode at a frequency of 4.7 GHz. When calculating the BP, the properties of the radio telescope antenna system in this operation mode were taken into account: the use of a large secondary mirror, asymmetric radiation of the primary mirror, and the location of the primary feeds (feed horns) along the focal line of the secondary mirror. The shape of the calculated drift scans of sources through the BP is compared with that of the experimental drift scans of sources obtained from observations in the West Sector. The main characteristics of the drift scans are calculated and compared when the radio telescope operates with the West and North Sectors. A new method for determination of flux densities of sources passing through the BP outside its central cross-section is proposed, and its accuracy is estimated. [ABSTRACT FROM AUTHOR]

Radio astronomy uses radio telescopes to detect very faint emissions from celestial objects. However, human-made radio frequency interference (RFI) is currently a common problem faced by most terrestrial radio telescopes, and it is getting worse with the development of the economy and technology. Therefore, it is essential to monitor and evaluate interference during the planning, construction, and operation stages of the radio telescope and protect the quiet radio environment around the radio astronomical site. In this paper, we present a software for an RFI analysis of the radio environment around the telescope. In this software, information has been collected, including the location of the site; the technical specifications, such as aperture and the frequency range of the radio telescopes; and the terrain around the site. The software and its modules are composed of telescope, geographic, and meteorological databases, and analysis modules of terrestrial and space-based RFI. Combined with the propagation characteristics of radio waves, we can analyze and evaluate RFI on the ground and in space around the radio telescope. The feasibility of the software has been proved by the experimental implementation of the propagation properties and RFI source estimation. With this software, efficient technical support can be expected for protecting the radio environment around the telescope, as well as improving site selection for planned radio astronomical facilities. [ABSTRACT FROM AUTHOR]

Baghdad University Radio Telescope (BURT) is a 3 meter radio telescope that was installed in the main campus of the University of Baghdad in Jadiriyah. Radio telescopes, in general, offer a wide range of applications in radio astronomy, which are usually used to detect the neutral hydrogen emission line at a wavelength of 21 cm. One of the key applications of BURT is to observe the Milky Way galaxy and to determine its rotation curve. However, performing such observations requires accurate determination of the appropriate observing time as well as the coordinates. This paper focuses on how the observing time and coordinates are calculated correctly and accurately. The horizontal coordinate that corresponds to the galactic coordinates (b=0° and 0° ≤ l ≤ 90°) in every single day of 2023 at 10 am have been calculated using a c++ code that has been written for the purpose of this work. The results showed that the appropriate time for observing the Milky Way using BURT in 2023 is during January, February, March, November and December of 2023. The medians of altitude during those months are 50.9798°, 62.7919°, 50.6198°, 9.6562° and 30.5041°, respectively. During those months, the altitude is found, in general, larger than zero which means that the galactic position is above the horizon. [ABSTRACT FROM AUTHOR]

The paper is devoted to the analysis of the observation results with the single-mirror radio telescope RT-22 (PRAO, LPI) in the water vapor maser line at 22 GHz in the direction of dust clumps from the ATLASGAL and Bolocam large-scale blind surveys in the millimeter continuum. The aim of this paper is to search for masers in the water vapor line in previously unexplored sources and to study the variability of known masers. Observations of 140 sources resulted in the detection of maser emission at 22 GHz in six sources, and in four sources (ATLASGAL 016.987+00.981, 017.216+00.821, 018.701–00.229, and Bolocam 081.174–00.100) masers were detected for the first time. In two sources (ATLASGAL 034.195–0.592 and Bolocam 081.174–0.1), the water vapor line masers showed significant variability during the 8-month observation and follow-up program. Comparison of RT-22 observational data with archival data from the GBT‑100 telescope (US National Radio Astronomy Observatory) showed that 9 out of 140 sources show a significant change in the radiation flux density of masers: two sources changed from the category of masers with low brightness ( Jy) to the category bright (more than 10 Jy), and in seven relatively bright earlier (more than 3 Jy) masers, no radiation was detected. Significant changes in the characteristics of the maser emission may indicate changes in the environmental conditions in which the maser emission was produced, which is of interest for further study of maser-related processes. [ABSTRACT FROM AUTHOR]

Modern studies of solar radio emission are complicated by continuous power amplification and multifrequency external interference, which often completely overlap important frequency ranges. Many topical problems in solar radio astronomy require large effective areas of radio telescopes, high frequency and time resolutions, accurate spatial measurements, and a large dynamic range. It becomes relevant to change the concept of receiving recording equipment. This paper deals with topical problems of the physics of the solar corona in combination with optimal methods of observation with large instruments. The features and difficulties of combining high parameters—dynamic, spatial, temporal, and frequency resolutions—are considered. The proposed solutions of the new-generation observation complex implement the possibilities of intelligent selection of registration conditions in a multioctave mode with multichannel over 8000 channels/GHz with temporary permission up to 8 ms/spectrum. A multiobject observation mode becomes available from powerful flaring objects to faint structures of various nature. High-speed data processing makes it possible to implement an online mode of interference elimination, which is based on a fast statistical analysis of the spectrum with the selection of non-Gaussian (interference) structures. Methods for high-speed analysis of large-volume data (the principal component analysis method) and their presentation to the user are proposed. Examples of the operation of the complex in the range of 1–3 GHz are given. The prospects of a new approach for multiobject radio astronomy observations in the implementation of the RATAN-600 tracking mode are considered: from recombination lines to wide-range spectra, from low-contrast fluctuations to fast changes in flares, etc. [ABSTRACT FROM AUTHOR]

National Astronomical Research Institute of Thailand (Public Organization) initiated a national flagship project in 2017 for development of radio astronomy and geodesy in Thailand. In this project, a 40-m Thai National Radio Telescope (TNRT) and a 13-m VLBI Global Observing System (VGOS) radio telescope as its co-location are constructed in Chiang Mai. The 40-m TNRT is the largest telescope for radio astronomy in South-East Asia. Its flexible operation with a wide-coverage of observable frequencies 0.3-115 GHz will allow us to uniquely contribute to the time-domain astronomy as well as carry out unbiased surveys for a wide variety of science research fields, which were published in a white paper. Within the framework of collaboration with VLBI arrays in the world, TNRT will drastically improve the imaging quality and performances based on its unique geographical location, for both radio astronomy and geodetic VLBI studies in South-East Asia for the first time. On-going commissioning of TNRT particularly in the L-band system (1.0–1.8 GHz) is introduced as well as vision for establishment of forthcoming regional VLBI networks based on TNRT: Thai National VLBI Array and South-East Asian VLBI Network in collaboration with Indonesia, Malaysia, and Vietnam. [ABSTRACT FROM AUTHOR]

Delingha 13.7 m telescope is one of the most important radio telescopes in China. Since installing the superconducting spectroscopic array receiver (SSAR) and adopting the On The Fly (OTF) observation mode, the telescope has operated for nearly 10 years. During this period, a large number of astronomical observation projects have been carried out and completed, a large amount of astronomical data have been accumulated, and a series of important scientific results have been achieved. This paper introduces the operating status of SSAR in astronomical observations, the problems in operations, as well as the fault phenomena and solutions. The performance test and performance analysis of SSAR are described in detail, including the receiver noise temperature and telescope system noise temperature, image rejection ratio (IRR), receiver stability, beam performance and so on. The updating and development of SSAR are listed, including the automatic adjustment of LO (Local Oscillator) power, the updating of pre-amplification circuits of the sideband separation superconducting mixer, and the optimization of control program, etc. This paper summarizes the experiences and rules, and connects the past with the future, for applying the experiences of the maintenance and operation of SSAR to the next-generation large-scale receiver system. [ABSTRACT FROM AUTHOR]

Nowadays there is increasing interest in narrowing coronal areas with reduced brightness temperatures (LTR – Low Temperature Regions) associated with local open magnetic fields (S-web, "coronal partings", "dark coronal corridors") as one of the eventual sources of slow solar wind. Ventspils International Radio Astronomy Centre (VIRAC) performs routine spectral polarimetric observations of the Sun with RT-32 radio telescope equipped with the multi-channel (16 frequency channels) spectral polarimeter for the wave length range of 3.2–4.7 cm (6.3–9.3 GHz) and both circular polarizations simultaneously. The analysis of relevant tasks of clear and reliable observations and detections of LTR shows the necessity to improve noise parameters, dynamic range and stability of the actual solar spectral polarimeter and to expand its wavelength range. Taking into account these requirements, the low noise and thermally stabilized solar spectral polarimeter was developed. The new multi-channel spectral polarimeter is expected to observe right and left circular polarization of the solar emission in the wavelength range of 2.1–7.5 cm (4.1–14.3 GHz) divided into 12 frequency bands. The dynamic range was expanded to >36 db and the signal/noise ratio (referred to as quiet Sun brightness temperatures) was enhanced to > 22–24 db. The paper deals with some test observations of the newly developed solar spectral polar-imeter and its feature analysis. Some eventual problems of solar physics which could be solved with the spectral polarimeter are also discussed. [ABSTRACT FROM AUTHOR]

Given the rise of satellite television, radio telescopes in the Ku‐band (12–18 GHz) constitute a potential alternative to introduce low‐scale astronomical observatories and amateur astronomers to radio astronomy. In this paper, we show a methodology for the calibration of Ku‐band radio telescopes and the evaluation of the techniques used for the observation of celestial bodies in this frequency range. To reduce the pointing error, we present a method of observation through matrix windows around the Sun. By observing the solar transits, our methodology allows to determine the system temperature, the beamwidth, the gain, the effective area, and the efficiency of the radio telescope. In addition, we developed the Compact Radio Telescope (CRT) software, designed to perform the calibration, and carry out observations. We tested our methodology with the Ku‐band radio telescope of the Observatorio Astronómico of the Universidad Tecnológica de Pereira (OAUTP), Colombia. After observing the Sun and the Moon, we obtained a brightness temperature of 8,600 ± 800 K and 240 ± 50 K, and radiation fluxes of 2,970,000 ± 690,000 Jy and 55,000 ± 10,000 Jy, respectively. These observations demonstrated the usefulness of our methodology and CRT software in the calibration of compact Ku‐band radio telescopes for the observation of celestial bodies in radio waves. [ABSTRACT FROM AUTHOR]

• Calibration algorithm of a radio telescope in the presence of man-made radio waves. • Array signal processing model that considers the presence of interferences. • Maximum likelihood estimation of the model parameters. • Development of a Space Alternating Generalized Expectation-Maximization algorithm. Radio interferometers are phased arrays producing high-resolution images from the covariance matrix of measurements. Calibration of such instruments is necessary and is a critical task. This is how the estimation of instrumental errors is usually done thanks to the knowledge of referenced celestial sources. However, the use of high sensitive antennas in modern radio interferometers (LOFAR, SKA) brings a new challenge in radio astronomy because they are more sensitive to Radio Frequency Interferences (RFI). The presence of RFI during the calibration process generally induces biases in state-of-the-art solutions. The purpose of this paper is to propose an alternative to alleviate the effects of RFI. For that, we first propose a model to take into account the presence of RFI in the data across multiple frequency channels thanks to a low-rank structured noise. We then achieve maximum likelihood estimation of the calibration parameters with a Space Alternating Generalized Expectation-Maximization (SAGE) algorithm for which we derive originally two sets of complete data allowing closed-form expressions for the updates. Numerical simulations show a significant gain in performance for RFI corrupted data in comparison with some more classical methods. [ABSTRACT FROM AUTHOR]