Search

Due to its service background, the thermal behavior of Ta films is substantially concerning to researchers, especially the heat-induced β-Ta to α-Ta phase transformation. In this work, the nanocrystalline Ta films with varying β/α phase ratios (0.85–0) were deposited and vacuum annealed at 200–800 °C to study the phase transformation behavior and mechanical properties. Partial phase transformation of β-Ta to α-Ta occurred at low temperature (200 °C) and complete transformation when the annealing temperature was raised to 800 °C. Moreover, an orientation relationship of β-<110>//α-<111> and β-{330}//α-{110} was concluded, and a hypothesis theory about the low-temperature phase transformation was proposed. Annealing hardening took place at 200–600 °C and softening at 800 °C in all the samples. The hardening is mostly due to the ordering of intergranular amorphous phases with the temperature increased, simultaneously bringing the increase of modulus. The annealing softening is governed by both grain coarsening and phase transformation, where the latter is dominated in high β fraction samples. • High-temperature induced grain boundary structure ordering promotes the hardening of Ta films at 200 °C–600 °C. • β-Ta to α-Ta phase transformation was found at a wide temperature range, which partially governs the softening of Ta at 800 °C. • A preferred orientation relationship of β-<110>{330}//α-<111>{110} was concluded • The influence of phase transformation on mechanical properties was independently quantified using a simple comparative method. [ABSTRACT FROM AUTHOR]

Hard β-Ta phase is generally produced during Ta film deposition. While in some cases, soft α-Ta phase is preferred to ensure deformation capability. In this work, templated growth strategy by introducing Cr buffer layer is proposed to tailor the phase composition in Ta films. A broad spectrum of β-Ta/α-Ta ratio from 90% to 0% can be continuously and precisely achieved when the buffer layer thickness is correspondingly controlled from 0 to ∼90 nm. Hardness of the Ta films is well proportional to the β-Ta/α-Ta ratio. The underlying mechanism of phase tailoring is rationalized by demonstrating the thickness-dependent crystallization of buffer layer. [Display omitted]. [ABSTRACT FROM AUTHOR]

The Al3+ doping effects on the ferromagnetic metallic state of La 0.55 Ca 0.45 MnO 3 have been studied by preparing the La 0.55 Ca 0.45 Mn 1- x Al x O 3- δ (x = 0, 0.05, 0.1, 0.15) ceramics. Various measurements such as ac susceptibility, relaxation, magnetization and resistivity were performed to study the magnetic and magnetotransport properties. The magnetic disorder produced by the Al3+ dopants and the oxygen vacancies suppress the long range ferromagnetic ordering and induce a short range charge ordered antiferromagnetic clusters, leading to a phase separated behavior in the Al3+-doped samples. A Griffith-like behavior is observed due to the occurrence of short range ferromagnetic clusters in the paramagnetic phase. The 15% Al3+ doping sample exhibits a spin-glass state. The 10% Al3+ doping system is blocked in a metastable state upon cooling at zero field, and a sharp metamagnetic transition is induced by applying a high magnetic field, in which the antiferromagnetic phase is transformed into ferromagnetic phase and the ferromagnetic clusters grow in size. The ferromagnetic domains grows rapidly when applying a high magnetic field. Once the conducting ferromagnetic domains are interconnected throughout the sample, a percolative insulating-to-metallic state transition would occur, accompanied by a sharp drop in resistivity. • Al3+ doping induces charge ordered AFM clusters in La 0.55 Ca 0.45 Mn 1- x Al x O 3- δ. • The magnetic disorder caused by Al3+ doping suppresses the long rang FM ordering. • The AFM clusters transform into FM phase via field driven metamagnetic transition. • Percolative insulator-metallic transition occurs when applying a magnetic field up to H C. [ABSTRACT FROM AUTHOR]

Magnetization relaxation, ac susceptibility, dc magnetization and magnetoelectrical transport measurements have been carried out on Al3+-doped manganites La 0.5 Ca 0.5 Mn 1- x Al x O 3- δ (x = 0.05, 0.07, 0.09, 0.10, 0.15). Experimental results suggest that nonmagnetic Al3+ substituting Mn suppresses the ferromagnetic phase and induces a charge ordered antiferromagnetic phase. The coexistence and competition of these two kinds of interactions result in a spin-glass like state in x = 0.1 and 0.15 system. Obvious hysteresis was observed in both magnetization and resistivity versus temperature and magnetic field curves, suggesting an inhomogeneous metastable phase transition. Upon applying a magnetic field of H C A-F, the Al3+-doped samples undergo an irreversible metamagnetic transition from the charge ordering antiferromagnetic insulating to ferromagnetic metallic phase in the low temperature region. Phase diagram in the H C - T plane has been determined according to the magnetization and magnetoelectric transport measurements. The magnetic disorders and antiferromagnetic matrix produced by Al3+ dopants and spontaneous oxygen vacancies play an important role in the pinning of the FM phase. [ABSTRACT FROM AUTHOR]

In this study, the crystallography of the nugget zone of bainitic steel was examined by applying friction stir welding (FSW) and submerging in various cooling mediums. In air, the variants mainly occurred in a single Bain group because of the plastic accommodation of transformation strain. However, in water and a mixture of water and CO 2 , the variants generated in two and four close-packed (CP) groups, respectively, and this was attributed to the self-accommodation of transformation strain. In this case, the variant selection was inhibited by both the severe deformation during FSW and low temperature of cooling medium. Furthermore, the reduced cooling-medium temperature resulted in refined bainitic and martensitic blocks with an increased fraction of high-misorientation variant pairs owing to the increased transformation driving force. • Previous studies on the FSW bainitic steel were focused on the phase transformation, and the crystallography was ignored. • The crystallographic characteristics and its effect on microstructure refinement for FSW bainitic steel was studied. • In air, the plastic deformation in austenite easily accommodates the transformation strain, causing the variant selection. • In water and water+CO 2 , refined blocks were obtained with an increased fraction of high-misorientation variant pairs. [ABSTRACT FROM AUTHOR]