Search

The emerging demands for healthcare where access is limited due to political, environmental, or socio-economic factors have been driving research into bio-medical devices that perform in both diagnostic and therapeutic roles at lower costs and greater accessibility. Paper microfluidic devices are used in many applications, particularly medical diagnostics and offer an excellent combination of utility and low cost making them particularly valuable in resource-limited applications and point-of-care usage across a wide variety environmental conditions. Microfluidic biological diagnostics continue to mature as researchers discover new ways to exploit the technological possibilities, and address liabilities. The increasing complexity of paper-based microfluidic devices beyond home pregnancy tests is driving the need to produce new tools and methodologies that enable more robust biological diagnostics and potential therapeutic applications. However, the process of developing new paper microfluidic devices is limited due to having to manually design and fabricate designs to research. Often, researchers must design scores of different devices to find a combination of parameters that functions as expected. In this work, a novel software framework to support automated development of paper-based microfluidic devices is introduced to facilitate both research and fabrication to accelerate the investigative process and reduce material utilization and manpower. Unlike to existing lab-on-a-chip technologies, paper-based microfluidics differs in terms of substrate technologies and use a passive flow method to deliver fluids and reagents for assays. While numerous analogies between microfluidics and semiconductor technologies have been espoused, the physical differences between the fluid dynamics and electrical current are significant which suggests that current trends in physical design for microfluidics must change course in order to be of practical use to designers. Within this framework, a methodology is introduced to address design automation such as dynamically placing and routing microfluidic components in a non-discrete design space while avoiding invalid design layouts, accounting for fluid volume usage, surface area utilization, and the timing required to perform specified biological assays and also optimizing device parameters, enabling researchers to focus on the science and thereby accelerating the development of new, low-resource paper microfluidic devices for a developing world.

This work presents a unique approach to the design, fabrication, and characterization of paper-based origami robotic systems consisting of stackable pneumatic actuators. These paper-based actuators (PBAs) use materials with high elastic modulus-to-mass ratios, accordion-like structures, and direct coupling with pneumatic pressure for extension and bending. The study contributes to the scientific and engineering understanding of foldable components under applied pneumatic pressure by constructing stretchable and flexible structures with intrinsically nonstretchable materials. Experiments showed that a PBA possesses a power-to-mass ratio greater than 80 W/kg, which is more than four times that of human muscle. This work also illustrates the stackability and functionality of PBAs by two prototypes: a parallel manipulator and a legged locomotor. The manipulator consisting of an array of PBAs can bend in a specific direction with the corresponding actuator inflated. In addition, the stacked actuators in the manipulator can rotate in opposite directions to compensate for relative rotation at the ends of each actuator to work in parallel and manipulate the platform. The locomotor rotates the PBAs to apply and release contact between the feet and the ground. Furthermore, a numerical model developed in this work predicts the mechanical performance of these inflatable actuators as a function of dimensional specifications and folding patterns. Overall, we use stacked origami actuators to implement functionalities of manipulation, gripping, and locomotion as conventional robotic systems. Future origami robots made of paper-like materials may be suitable for single use in contaminated or unstructured environments or low-cost educational materials.

Background The screening of biological hazards, chemical contaminants and allergens in food products is a major concern of food industry since they can cause serious illnesses and even lead to death. Therefore, there is a significant interest in developing low-cost, robust, and rapid detection methods for food safety and quality analysis. Conventional methods provide accurate analytical characteristics, but require well-equipped laboratories, trained personnel, costly reagents, and complicated sample preparation procedures prior to the detection in order to obtain reliable results. Hence, they are not always ideal for on-site food surveillance. Scope and approach This paper discusses the fundamentals of microfluidic paper-based analytical devices (μPADs) and reviews the recent progress in their usage for screening biological hazards, harmful chemical residues, and allergens in food products to systematically evaluate the strengths and weaknesses of this technology. It then covers future trends and useful strategies that could be employed in μPADs design and fabrication procedures to address the critical challenges in equipment-free food analysis. Key findings and conclusions μPADs offer promising avenues to revolutionize food safety and quality analysis with merits of equipment-free sample preparation and detection at low-cost. Despite the advancement in the microfluidic technology, the manufacturing of user-friendly sample-to-answer μPADs still requires intensive research studies to be employed for robust and sensitive food safety and quality analysis.

Made available in DSpace on 2022-04-29T08:31:12Z (GMT). No. of bitstreams: 0 Previous issue date: 2021-10-01 Organization and planning of reverse logistics networks make sustainable processes more efficient. Thus, an important sector for connecting the collection and waste paper recycling echelons is the intermediate center. In this study, a Mixed Integer Linear Programming model, which is multi-objective, multi-product, multi-level and multi-period, was developed to optimize the waste paper logistics processes of intermediate centers. The formulation includes the following echelons: collection, considering vehicle routing with different capacities; inventory of non-baling materials; baling sorted waste and inventory of bales; selling bales; disposal of non-recyclable waste. The aims of the model include: maximizing the collected waste; minimizing distances; maximizing both the production and sale of bales, and minimizing costs. According to research carried out in the literature, the developed model is a new proposal and to implement it, the Weighted Goal Programming and Revised Multi-Choice Goal Programming approaches were used to deal with multiple objectives and incorporate uncertainty into the quantity of waste available for collection. To analyze the proposed model, computational tests were executed with instances based on real data from a Brazilian company in the sector. For all performed tests, General Algebraic Modeling System 23.6.5 modeling language and CPLEX 12.2.0.2 solver were used for modeling and optimization. The results show that this study presents formulation and technological approaches that represent real situations and provide competitive solutions to the problem. Sáo Paulo State University “Júlio de Mesquita Filho” [Universidade Estadual Paulista Júlio de Mesquita Filho] School of Engineering of Guaratinguetá [Faculdade de Engenharia de Guaratinguetá] Production Department, Av. Ariberto Pereira da Cunha, 333, Portal das Colinas Agulhas Negras Military Academy [Academia Militar das Agulhas Negras] Rodovia Presidente Dutra, km 306, s/n Escola Preparatória de Cadetes do Exército Avenida Papa Pio XII 350 Jardim Chapadão Campinas - SP Brazil, Avenida Papa Pio XII, 350, Jardim Chapadão, Campinas - SP Sáo Paulo State University “Júlio de Mesquita Filho” [Universidade Estadual Paulista Júlio de Mesquita Filho] School of Engineering of Guaratinguetá [Faculdade de Engenharia de Guaratinguetá] Production Department, Av. Ariberto Pereira da Cunha, 333, Portal das Colinas

A precoding technique based on polar codes and probabilistic shaping is introduced for dirty paper coding. Two variants of the precoding use multi-level shaping and sign-bit shaping in one dimension. The decoder uses multi-stage successive-cancellation list decoding with list-passing across the bit levels. The approach achieves approximately the same frame error rates as polar codes with multi-level shaping over standard additive white Gaussian noise channels at a block length of 256 symbols and with different amplitude shift keying (ASK) constellations.

The pulp and paper industry is highly energy-intensive. In mills that use chemical pulping, roughly half of the higher heating value of the cellulosic material used to manufacture the product typically is incinerated to generate steam and electricity that is needed to run the processes. Additional energy, much of it non-renewable, needs to be purchased. This review considers publications describing steps that pulp and paper facilities can take to operate more efficiently. Savings can be achieved, for instance, by minimizing unnecessary losses in exergy, which can be defined as the energy content relative to a standard ambient condition. Throughout the long series of unit operations comprising the conversion of wood material to sheets of paper, there are large opportunities to more closely approach a hypothetical ideal performance by following established best-practices.

The appearance and quick spread of the new severe acute respiratory syndrome coronavirus disease, COVID-19, brought major societal challenges. Importantly, suitable medical diagnosis procedures and smooth clinical management of the disease are an emergent need, which must be anchored on novel diagnostic methods and devices. Novel molecular diagnostic tools relying on nucleic acid amplification testing have emerged globally and are the current gold standard in COVID-19 diagnosis. However, the need for widespread testing methodologies for fast, effective testing in multiple epidemiological scenarios remains a crucial step in the fight against the COVID-19 pandemic. Biosensors have previously shown the potential for cost-effective and accessible diagnostics, finding applications in settings where conventional, laboratorial techniques may not be readily employed. Paper- and cellulose-based biosensors can be particularly relevant in pandemic times, for the renewability, possibility of mass production with sustainable methodologies, and safe environmental disposal. In this review, paper-based devices and platforms targeting SARS-CoV-2 are showcased and discussed, as a means to achieve quick and low-cost PoC diagnosis, including detection methodologies for viral genomic material, viral antigen detection, and serological antibody testing. Devices targeting inflammatory markers relevant for COVID-19 are also discussed, as fast, reliable bedside diagnostic tools for patient treatment and follow-up., The authors acknowledge funding through projects Eco2Covid (POCI-01-02B7-FEDER-068174) and TecniCov (POCI-01-02B7-FEDER-069745), co-funded by FEDER through COMPETE2020 and Lisboa2020. T.P., A.R.C. and A.C.M. acknowledge funding to National Foundation for Science and Technology, I.P., FCT, through their PhD grants, references DFA/BD/8606/2020, SFRH/BD/130107/2017 and SFRH/BD/115173/2016, respectively, info:eu-repo/semantics/publishedVersion

In today’s era the content based video retrieval are major challengesdue to large storage, transmission, and downloading of videos. Video is retrieve based on visual content. Most of the researchers worked on low-level pixel content like shape, color and texture. In this paper, we review the content based video retrieval by using high-level features such as the spatio-temporal domain and review on the latest methods adopted by the researcher for video retrieval. The state-of-the-art of this paper mainly focuses on a review of video retrieval, its challenges, parameters consideration, and techniques that are to be incorporated.

The majority of chemical experiments conducted during educational programs are carried out in laboratories because they require instructors with special skills, in addition to large, expensive instruments. Recently, there has been an increasing demand for chemical experiments that can be carried out anywhere. Herein, we propose a novel type of paper-based analytical device (PAD) for enabling quantitative analysis without the requirement for a micropipette, since the PAD features a large sample loading zone and a waste zone, enabling accurate volume control of a liquid sample. We initially employed a micropipette to evaluate the PAD and demonstrate the quantitative analysis of ascorbic acid (AA) and pH using different loading volumes. Finally, we determined the AA concentrations and pH values of commercially available beverages using disposable plastic droppers, and the obtained results were in good agreement with those obtained through conventional methods. This PAD format can therefore be used as a novel educational tool for conducting certain chemical analyses in remote learning environments.

Papers are the most commonly used substrates. A printable paper must have certain properties. These properties include surface smoothness, air permeability, surface energy, colour of the paper, opacity, whiteness, light fastness, gloss, and coefficient of elongation under force. In addition, a good printable paper should not allow ink to pass between its two surfaces. After the papers are produced, they are subjected to surface treatments in order to improve the above-mentioned properties and to provide extra specification. Surface treatments include calendering, surface sizing and coating processes. While filling the recesses and protrusions on the surface with the coating process, the paper's affinity for the ink is increased, and the penetration of the ink to the other surface of the paper is prevented. In the coating process basically, a filler is dispersed in a binder. In this study, it is aimed to obtain the highest quality and most printable paper by changing the type of binder used in the coating. In this study, equal amount (5% w/w) titanium dioxide filler was used in all coating formulations. In coating formulations; cationic starch, hydroxy ethyl cellulose and polyvinyl alcohol polymers were used as binders. Binder amounts are adjusted according to optimum viscosity. The obtained coating formulations were coated on the paper surface with a laboratory type coating device. Colour, gloss, surface smoothness, air permeability, surface energy and surface morphology of the coated papers were determined. It was printed with magenta offset printing ink on three different types of paper coated with different binders, using the IGT C1 offset printability test device, under 400 N/m2 pressure printing conditions. Colour and gloss measurements of the prints were made. As a result; It was determined that three different binders improved the printability parameters.

The field of information security, in general, has seen shifts a traditional approach to an intelligence system. Moreover, an increasing of researchers to focus on propose intelligence systems and framework based on the forensic case studies because of the limitations of traditional methods such as analysis intensive data manually, intelligence visualization to make the evidence more understandable and intelligence system for store data. However, most of these intelligence systems are still facing different limitations. Furthermore, the primary goal of this work analysis popular intelligence system that was used based on forensic. Moreover, propose new algorithms and hybrid model which it's achieved good results in dif-ferent other fields to develop the forensic systems in the future.