Search

This work presents a unique approach to the design, fabrication, and characterization of paper-based origami robotic systems consisting of stackable pneumatic actuators. These paper-based actuators (PBAs) use materials with high elastic modulus-to-mass ratios, accordion-like structures, and direct coupling with pneumatic pressure for extension and bending. The study contributes to the scientific and engineering understanding of foldable components under applied pneumatic pressure by constructing stretchable and flexible structures with intrinsically nonstretchable materials. Experiments showed that a PBA possesses a power-to-mass ratio greater than 80 W/kg, which is more than four times that of human muscle. This work also illustrates the stackability and functionality of PBAs by two prototypes: a parallel manipulator and a legged locomotor. The manipulator consisting of an array of PBAs can bend in a specific direction with the corresponding actuator inflated. In addition, the stacked actuators in the manipulator can rotate in opposite directions to compensate for relative rotation at the ends of each actuator to work in parallel and manipulate the platform. The locomotor rotates the PBAs to apply and release contact between the feet and the ground. Furthermore, a numerical model developed in this work predicts the mechanical performance of these inflatable actuators as a function of dimensional specifications and folding patterns. Overall, we use stacked origami actuators to implement functionalities of manipulation, gripping, and locomotion as conventional robotic systems. Future origami robots made of paper-like materials may be suitable for single use in contaminated or unstructured environments or low-cost educational materials.

Background The screening of biological hazards, chemical contaminants and allergens in food products is a major concern of food industry since they can cause serious illnesses and even lead to death. Therefore, there is a significant interest in developing low-cost, robust, and rapid detection methods for food safety and quality analysis. Conventional methods provide accurate analytical characteristics, but require well-equipped laboratories, trained personnel, costly reagents, and complicated sample preparation procedures prior to the detection in order to obtain reliable results. Hence, they are not always ideal for on-site food surveillance. Scope and approach This paper discusses the fundamentals of microfluidic paper-based analytical devices (μPADs) and reviews the recent progress in their usage for screening biological hazards, harmful chemical residues, and allergens in food products to systematically evaluate the strengths and weaknesses of this technology. It then covers future trends and useful strategies that could be employed in μPADs design and fabrication procedures to address the critical challenges in equipment-free food analysis. Key findings and conclusions μPADs offer promising avenues to revolutionize food safety and quality analysis with merits of equipment-free sample preparation and detection at low-cost. Despite the advancement in the microfluidic technology, the manufacturing of user-friendly sample-to-answer μPADs still requires intensive research studies to be employed for robust and sensitive food safety and quality analysis.

The pulp and paper industry is highly energy-intensive. In mills that use chemical pulping, roughly half of the higher heating value of the cellulosic material used to manufacture the product typically is incinerated to generate steam and electricity that is needed to run the processes. Additional energy, much of it non-renewable, needs to be purchased. This review considers publications describing steps that pulp and paper facilities can take to operate more efficiently. Savings can be achieved, for instance, by minimizing unnecessary losses in exergy, which can be defined as the energy content relative to a standard ambient condition. Throughout the long series of unit operations comprising the conversion of wood material to sheets of paper, there are large opportunities to more closely approach a hypothetical ideal performance by following established best-practices.

The majority of chemical experiments conducted during educational programs are carried out in laboratories because they require instructors with special skills, in addition to large, expensive instruments. Recently, there has been an increasing demand for chemical experiments that can be carried out anywhere. Herein, we propose a novel type of paper-based analytical device (PAD) for enabling quantitative analysis without the requirement for a micropipette, since the PAD features a large sample loading zone and a waste zone, enabling accurate volume control of a liquid sample. We initially employed a micropipette to evaluate the PAD and demonstrate the quantitative analysis of ascorbic acid (AA) and pH using different loading volumes. Finally, we determined the AA concentrations and pH values of commercially available beverages using disposable plastic droppers, and the obtained results were in good agreement with those obtained through conventional methods. This PAD format can therefore be used as a novel educational tool for conducting certain chemical analyses in remote learning environments.

Around 60% of the paper worldwide is made from recovered paper. Especially adhesive contaminants, so called stickies, reduce paper quality. To remove stickies but at the same time keep as many valuable fibers as possible, multi-stage screening systems with several interconnected pressure screens are used. When planning such systems, suitable screens have to be selected and their interconnection as well as operational parameters have to be defined considering multiple conflicting objectives. In this contribution, we present a Mixed-Integer Nonlinear Program to optimize system layout, component selection and operation to find a suitable trade-off between output quality and yield.

Over the last few years, the microfluidics phenomenon coupled with the Internet of Things (IoT) using innovative nano-functional materials has been recognized as a sustainable and economical tool for point-of-care testing (POCT) of various pathogens influencing human health. The sensors based on these phenomena aim to be designed for cost-effectiveness, make it handy, environment-friendly, and get an accurate, easy, and rapid response. Considering the burgeoning importance of analytical devices in the healthcare domain, this review paper is based on the gist of sensing aspects of the microfabricated paper-based analytical devices (μPADs). The article discusses the various used design methodologies and fabrication approaches and elucidates the recently reported surface modification strategies, detection mechanisms viz., colorimetric, electrochemical, fluorescence, electrochemiluminescence, etc. In a nutshell, this article summarizes the state-of-the-art research work carried out over the nano functionalized paper-based analytical devices and associated challenges/solutions in the point of care testing domain.

With characters of low cost, portability, easy disposal, and high accuracy, as well as bulky reduced laboratory equipment, paper-based sensors are getting increasing attention for reliable indoor/outdoor onsite detection with nonexpert operation. They have become powerful analysis tools in trace detection with ultra-low detection limits and extremely high accuracy, resulting in their great popularity in medical detection, environmental inspection, and other applications. Herein, we summarize and generalize the recently reported paper-based sensors based on their application for mechanics, biomolecules, food safety, and environmental inspection. Based on the biological, physical, and chemical analytes-sensitive electrical or optical signals, extensive detections of a large number of factors such as humidity, pressure, nucleic acid, protein, sugar, biomarkers, metal ions, and organic/inorganic chemical substances have been reported via paper-based sensors. Challenges faced by the current paper-based sensors from the fundamental problems and practical applications are subsequently analyzed; thus, the future directions of paper-based sensors are specified for their rapid handheld testing.

Introduction:The Ministry of Public Health in Lebanon is in the process of converting the surveillance reporting from a cumbersome paper-based system to a web-based electronic platform (DHIS-2) to have real-time information for early detection of alerts and outbreaks and for initiating a prompt response.Objectives:This paper aimed to document the Lebanese experience in implementing DHIS-2 for the disease surveillance system. It also targets to assess the improvement of reporting rates and timeliness of the reported data and to disclose the encountered challenges and opportunities. MethodologyThis is a retrospective description of processes involved in the implementation of the DHIS-2 tool in Lebanon. Initially, it was piloted for the school-based surveillance in 2014; then its use was extended in May 2017 to cover other specific surveillance systems. This included all surveillance programs collecting aggregate data from hospitals, medical centers, dispensaries, or laboratories at the first stage. As part of the national roll-out process, the online application was developed. The customized aggregated-based datasets, organization units, user accounts, specific and generic dashboards were generated. More than 80 training sessions were conducted throughout the country targeting 1290 end-users including health officers at the national and provincial levels, focal persons working in all public and private hospitals, laboratories, and medical centers as well. Completeness and timeliness of reported data were compared before and after the implementation of DHIS-2. Challenges and lessons learned during the roll-out process are listed.ResultsFor laboratory-based surveillance, completeness of reporting increased from 70.8% in May to 89.6% in October. Timeliness has improved from 25% to 74%. For medical centers, an improvement of 8.1% for completeness and 9.4% in timeliness was recorded before and after training sessions. For zero reporting, completeness remains the same (88%) and timeliness has improved from 74% to 87%. The main challenges faced during the implementation of DHIS-2 were mainly infrastructural and system-related in addition to poor internet connectivity and limited workforce and frequent changes to DHIS-2 versions.ConclusionImplementation of DHIS-2 improved timeliness and completeness for aggregated data reporting. Continued on-site support, monitoring, and system enhancement are needed to improve the performance of DHIS-2.

The accuracy of a predictive system is critical for predictive maintenance and to support the right decisions at the right times. Statistical models, such as ARIMA and SARIMA, are unable to describe the stochastic nature of the data. Neural networks, such as long short-term memory (LSTM) and the gated recurrent unit (GRU), are good predictors for univariate and multivariate data. The present paper describes a case study where the performances of long short-term memory and gated recurrent units are compared, based on different hyperparameters. In general, gated recurrent units exhibit better performance, based on a case study on pulp paper presses. The final result demonstrates that, to maximize the equipment availability, gated recurrent units, as demonstrated in the paper, are the best options.

The low cost, simplicity, and ease of use of paper microfluidic devices have made them valuable medical diagnostics for applications from pregnancy testing to COVID-19 screening. Meanwhile, the increasing complexity of paper-based microfluidic devices is driving the need to produce new tools and methodologies that enable more robust biological diagnostics and potential therapeutic applications. A new design framework is being used to facilitate both research and fabrication of paper-based microfluidic biological devices to accelerate the investigative process and reduce material utilization and manpower. In this work we present a methodology for this framework to dynamically place and route microfluidic components in a nondiscrete design space where fluid volume usage, surface area utilization, and the timing required to perform specified biological assays are accounted for and optimized while also accelerating the development of potentially lifesaving new devices.

In simple dyadic games such as rock, paper, scissors (RPS), people exhibit peculiar sequential dependencies across repeated interactions with a stable opponent. These regularities seem to arise from a mutually adversarial process of trying to outwit their opponent. What underlies this process, and what are its limits? Here, we offer a novel framework for formally describing and quantifying human adversarial reasoning in the rock, paper, scissors game. We first show that this framework enables a precise characterization of the complexity of patterned behaviors that people exhibit themselves, and appear to exploit in others. This combination allows for a quantitative understanding of human opponent modeling abilities. We apply these tools to an experiment in which people played 300 rounds of RPS in stable dyads. We find that although people exhibit very complex move dependencies, they cannot exploit these dependencies in their opponents, indicating a fundamental limitation in people’s capacity for adversarial reasoning. Taken together, the results presented here show how the rock, paper, scissors game allows for precise formalization of human adaptive reasoning abilities.

Analysis of roll products at the final stage of production is the main stage for identifying defects, disrupted integrity or homogeneity, etc. Paper production is a typical example of such an operation in an industrial setting. It is proposed to use the results of the assessment for opacity, described by several standardized and statistical estimates, as the main characteristic for the quality of paper products. Studies of the dependence of the quality of the paper web on the production conditions and the properties of raw materials produce considerable variance, so that it is impossible to make accurate predictions. For this reason, we used a neural network modeling technology to develop an intelligent system for monitoring the quality of the paper web. Online quality control allows to assess the efficiency of the paper machine and rapidly adjust the manufacturing execution system. Special technologies such as computer vision systems can be introduced for this purpose, making it possible to make a transition from subjective assessment of the structure and defects of the paper web to obtaining objective quantitative estimates of these indicators. We considered a procedure for determining the estimates of structural heterogeneity of the paper web at the final stage of its production. We suggest to expand the classification of finished product samples by using neural fuzzy interpolation of linguistic values of such indicators. The approach introduced is aimed at improving the efficiency of the production process.

The NIST selection process for standardizing Post-Quantum Cryptography Mechanisms is currently running. Many papers already studied their theoretical security, but the resistance in deployed device has not been much investigated so far. In particular, fault attack is a serious threat for algorithms implemented in embedded devices. One particularly powerful technique is to use safe-error attacks. Such attacks exploit the fact that a specific fault may or may not lead to a faulty output depending on a secret value. In this paper, we investigate the resistance of various Post-Quantum candidates algorithms against such attacks.

The fast detection of trace amounts of hazardous contaminations can prevent serious damage to the environment. Paper-based sensors offer a new perspective on the world of analytical methods, overcoming previous limitations by fabricating a simple device with valuable benefits such as flexibility, biocompatibility, disposability, biodegradability, easy operation, large surface-to-volume ratio, and cost-effectiveness. Depending on the performance type, the device can be used to analyze the analyte in the liquid or vapor phase. For liquid samples, various structures (including a dipstick, as well as microfluidic and lateral flow) have been constructed. Paper-based 3D sensors are prepared by gluing and folding different layers of a piece of paper, being more user-friendly, due to the combination of several preparation methods, the integration of different sensor elements, and the connection between two methods of detection in a small set. Paper sensors can be used in chromatographic, electrochemical, and colorimetric processes, depending on the type of transducer. Additionally, in recent years, the applicability of these sensors has been investigated in various applications, such as food and water quality, environmental monitoring, disease diagnosis, and medical sciences. Here, we review the development (from 2010 to 2021) of paper methods in the field of the detection and determination of toxic substances.

The development of diagnostic tools for measuring a wide spectrum of target analytes, from biomarkers to other biochemical parameters in biological fluids, has experienced a significant growth in the last decades, with a good number of such tools entering the market. Recently, a clear focus has been put on miniaturized wearable devices, which offer powerful capabilities for real-time and continuous analysis of biofluids, mainly sweat, and can be used in athletics, consumer wellness, military, and healthcare applications. Sweat is an attractive biofluid in which different biomarkers could be noninvasively measured to provide rapid information about the physical state of an individual. Wearable devices reported so far often provide discrete (single) measurements of the target analytes, most of them in the form of a yes/no qualitative response. However, quantitative biomarker analysis over certain periods of time is highly demanded for many applications such as the practice of sports or the precise control of the patient status in hospital settings. For this, a feasible combination of fluidic elements and sensor architectures has been sought. In this regard, this paper shows a concise overview of analytical tools based on the use of capillary-driven fluidics taking place on paper or fabric devices integrated with solid-state sensors fabricated by thick film technologies. The main advantages and limitations of the current technologies are pointed out together with the progress towards the development of functional devices. Those approaches reported in the last decade are examined in detail.

The clinical importance of blood group (BG) antigens is related to their ability to induce immune antibodies that can cause hemolysis. Yet, ABO and D (Rh) are still considered to be the key antigens for healthy blood transfusion and secondary antigens are the next priority. Serological typing is the most widely used typing method. Rapid and accurate blood grouping plays an important role in some clinical conditions, rather than conventional techniques. Hence, developing a simple and economical model for rapid blood grouping would facilitate these tests. In recent decades, paper-based microfluidics such as μPADs has gained much interest in wide application areas such as point-of-care diagnostic. In this study, we evaluated μPADs that are performed for blood grouping and its recent progress. A comprehensive literature search was performed using databases including PUBMED, SCOPUS, Web of Science and Google Scholar. Keywords were blood grouping or typing, paper analytical device, rapid test, etc. After investigation of search results, 16 papers from 2010 to 2020 were included. Further information in detail was classified in Table 1. Generally, two principles for blood typing μPADs are introduced. The lateral chromatographic flow method and the vertical flow-through method that detects BG in a visual-based manner. To detect results with acceptable clarity many factors and challenges like paper, blood sample, buffer, Ab and RBC interaction and also μPADs stability need to be considered, which are discussed. In conclusion, the simplicity, stability, cheapness, portability and biocompatibility of μPADs for blood grouping confirming its utility and also they have the capability to robust, universal blood-grouping platform. Table 1 Summary of blood grouping tests using paper-based analytical devices Antigens Type of diagnosis Validation method Sample No Accuracy Action time Paper type Stability Sample dilution Buffer Ref A, B, Rh Forward volunteers records 5 - - Whatman No. 4 - 1/2 PBS* (Khan et al. 2010) A, B, Rh Forward gel assay test and conventional slide test 100 100% 1 min Whatman No. 4 and Kleeenex paper towel 7 Days in 4 °C 1/1 NSS (Al-Tamimi et al. 2012) A, B, Rh Forward gel card assay 99 100% 20 Sec + Washing Kleeenex paper towel - 1/1 NSS (Li et al. 2012) A, B, Rh Forward - - - - Kleeenex paper towel - 45/100 PSS (Li et al. 2013) A, B, Rh Forward gel card assay 98 100% 1.5 min Kleeenex paper towel - 85/100 PBS (Guan et al. 2014b) C, E, c, e, K, Jka, Jkb, M, N, S, P1, and Lea Forward gel card assay 266 100% - Kleeenex paper towel - 1/1 NSS (Li et al. 2014b) A, B, Rh Forward and Reverse conventional slide test 96 ≈ 91% 10 min Whatman No. 1 21 Days in 4 °C 1/2 NSS (Noiphung et al. 2015) C, c, E, e, K, k, Fya, Fyb, Jka, Jkb, M, N, S and s, P1, Lea and Leb Forward - 478 - - Kleeenex paper towel - 1/1 NSS, PBS (Then et al. 2015) A, B Forward and Reverse conventional slide test 76 100% 5-8 min Whatman No. 4 38 Days in 4 °C 1/4, 1/1 NSS (Songjaroen and Laiwattanapaisal 2016) D, K Forward volunteers records 210 - 7.5 min Kleenex paper towel - 1/1 NSS (Yeow et al. 2016) A, B, c, e, D, C, E, M, N, S, s, P1, Jka, Jkb, Lea, Leb, Fya, and Fyb Forward and Reverse gel card assay 3550 ≈100% 30 s Fiber glass and cotton linter 180 Days in 25 °C 45/100, 1/1 PBS (Zhang et al. 2017) A, B Forward conventional slide test 598 100% 3 min Whatman No. 113 14 Day in 4 °C 1/1 NSS (Songjaroen et al. 2018) A, B, Rh Forward conventional slide test - - 30 Sec + Washing Unrefined sisal paper - 1/2 NSS (Casals-Terré et al. 2019) A, B, Rh Forward - - - - Whatman No.1 - 1/1 NSS (Ansari et al. 2020) ABORh Forward and Reverse conventional slide test - 100% Unrefined Eucalyptus papers - 1/2 NSS, PBS (Casals-Terré et al. 2020) A, B, Rh Forward - - - 30 Sec + Washing Whatman No. 4 modified with chitosan ≥ 100 days in 25 °C 1/1 NSS (Parween et al. 2020)

Visual individual recognition requires animals to distinguish among conspecifics based on appearance. Though visual individual recognition has been reported in a range of taxa, the features that animals rely on to discriminate between individuals are often not well understood. Northern paper wasp females, Polistes fuscatus, possess individually distinctive color patterns on their faces, which mediate individual recognition. It is currently unclear what facial features P. fuscatus use to distinguish individuals. The anterior optic tubercle, a chromatic processing brain region, is especially sensitive to social experience during development, suggesting that color may be important for recognition in this species. We sought to test the roles of color in wasp facial recognition. Color may be important simply because it creates a pattern. If this is the case, then wasps should perform similarly when discriminating color or grayscale images of the same faces. Alternatively, color itself may be important for recognition, which would predict poorer performance on grayscale image discrimination relative to color images. We found wasps trained on grayscale faces, unlike those trained on color images, did not perform better than chance. Suggesting that color is necessary for the recognition of an image as a face by the wasp visual system.

Due to the increasing use of the Internet and other online resources, there is tremendous growth in the data of text documents. It is not possible to manage this huge data manually. This has led to the growth of fields like text mining and text summarization. This paper presents a title prediction model for research papers using Recursive Recurrent Neural Network (Recursive RNN) and evaluates its performance by comparing it with sequence-to-sequence models. Research papers published between 2018 and 2020 were obtained from a standard repository, viz. Kaggle, to train the title prediction model. The performance of different versions of Recursive RNN and Seq2Seq was evaluated in terms of training and hold-out loss. The experimental results show that Recursive RNN models perform significantly better than the other models.

The industry of disposables has undergone a huge revolution in this century owing to the busy lifestyles and technological advancements in its production and manufacturing process. Paper cups are one of the widely used products in disposable industry. It has multi utility options that is it can be used to drink water as well as beverages, soups, liquids etc. This paper entirely focuses on increasing the quality factor of production and manufacturing process of these paper cups by adding additional circuitry to the existing machinery to reduce waste of raw materials as well as the per unit cost involved in wastage of electricity. This research work is based on using proximity sensors to sense the materials and molded paper cups infront of machinery and reduce the electric wastage through a relay Mechanism assembly. This is a PLC based live project example of effectively increasing the overall efficiency of the manufacturing plant

For the detection of product color uniformity and seam texture defects in the production process of test paper, detection methods are proposed respectively. For the detection of the color uniformity, a uniformity detection method based on dynamic light correction is proposed. The illumination correction image is used for color dynamic compensation of the test paper image to solve the influence of uneven illumination on the test paper. For the detection of texture defects such as seams, a texture defect detection method based on gray gradient aggregation intensity is proposed. This method uses one-way Gaussian convolution to strengthen features, and then calculates the gradient, divides the region and calculates the gradient extremum aggregation strength to judge texture defects, which can quickly and efficiently find seam defects. The experimental results show that the above methods have obvious effects on the color uniformity and seam detection of the test paper. The color uniformity accuracy rate is 96%, the seam detection accuracy rate is 97%. The total detection time of a single test paper is about 90ms. The algorithm is real-time and accurate, and can be used in actual production detection.

Diagnostic and evidential static image, video clip, and sound multimedia are captured during routine clinical care in cardiology, dermatology, ophthalmology, pathology, physiatry, radiation oncology, radiology, endoscopic procedural specialties, and other medical disciplines. Providers typically describe the multimedia findings in contemporaneous electronic health record clinical notes or associate a textual interpretative report. Visual communication aids commonly used to connect, synthesize, and supplement multimedia and descriptive text outside medicine remain technically challenging to integrate into patient care. Such beneficial interactive elements may include hyperlinks between text, multimedia elements, alphanumeric and geometric annotations, tables, graphs, timelines, diagrams, anatomic maps, and hyperlinks to external educational references that patients or provider consumers may find valuable. This HIMSS-SIIM Enterprise Imaging Community workgroup white paper outlines the current and desired clinical future state of interactive multimedia reporting (IMR). The workgroup adopted a consensus definition of IMR as “interactive medical documentation that combines clinical images, videos, sound, imaging metadata, and/or image annotations with text, typographic emphases, tables, graphs, event timelines, anatomic maps, hyperlinks, and/or educational resources to optimize communication between medical professionals, and between medical professionals and their patients.” This white paper also serves as a precursor for future efforts toward solving technical issues impeding routine interactive multimedia report creation and ingestion into electronic health records.

International audience; This paper focuses on the problem of the hierarchical multi‐label classification of research papers, which is the task of assigning the set of relevant labels for a paper from a hierarchy, using reduced amounts of labelled training data. Specifically, we study leveraging unlabelled data, which are usually plentiful and easy to collect, in addition to the few available labelled ones in a semi‐supervised learning framework for achieving better performance results. Thus, in this paper, we propose a semi‐supervised approach for the hierarchical multi‐label classification task of research papers based on the well‐known Co‐training algorithm, which exploit content and bibliographic coupling information as two distinct papers' views. In our approach, two hierarchical multi‐label classifiers, are learnt on different views of the labelled data, and iteratively select their most confident unlabelled samples, which are further added to the labelled set. The success of our suggested Co‐training‐based approach lies in two main components. The first is the use of two suggested selection criteria (i.e., Maximum Agreement and Labels Cardinality Consistency) that enforce selecting confident unlabelled samples. The second is the appliance of an oversampling method that rebalances the labels distribution of the initial labelled set, which reduces the reinforcement of the label imbalance issue during the Co‐training learning. The proposed approach is evaluated using a collection of scientific papers extracted from the ACM digital library. Performed experiments show the effectiveness of our approach with regards to several baseline methods.

Foam forming technology has attracted much attention during the past few years in the paper industry. Its advantages compared to conventional water forming are a new product portfolio and increased process efficiency. To support the paper industry in pushing foam forming technology forward, process simulation is needed to provide supporting data for strategic decision-making and as a basis for equipment dimensioning. This study examined the conversion of an existing wallpaper machine from water to foam forming technology using process simulation. To determine the required process configuration and parameter changes in the existing process, both published and unpublished data on the foam forming process were collected. This paper also describes modeling of the foam phase in the selected simulation software. The suitability of existing paper process equipment for foam was analyzed. Simulations revealed that undisturbed operation with foam requires some equipment modifications and re-arrangements in water circuits. With foam forming, the water balance in both short and long circulation changes remarkably compared to conventional water forming, leading to a large increase in the long circulation volume flows.

Electromagnetic Fault Injection (EMFI) is a well known method of introducing faults for security analysis of digital devices. Such faults can be seen as analogous to the faults which are known to naturally occur in digital devices, a known problem with designing safety-critical systems.Numerous standards have been developed for safety-critical systems, including the development of standards for increasing the rate of naturally occurring faults using particle sources. In this work, we demonstrate that desktop EMFI tooling can be used to accomplish similar testing, but with more control, effectively speeding up the evaluation process.We demonstrate using EMFI tooling for safety evaluation to recreate a highly publicized safety issue present in an automotive ECU – one that could not easily be recreated with other techniques.

Paper-based microfluidic analytical devices (μPADs) have shown great potential in the field of analysis due to their advantages of rapid analysis, environmental friendliness and the ability to realize the flow of fluid without external power. Saliva is an emerging biofluid which is used in diseases diagnostic and screening for the easy collection and the reflection of the physiological state. This review focuses on the fabrication methods for two-dimensional (2D) and three-dimensional (3D) μPADs and their applications on the saliva analysis. In the first part, the flow mechanism in μPADs is discussed. The second part mainly introduces the fabrication methods for the μPADs and compares the different methods. The third part presents the application of μPADs in the detection of biomarkers such as nitrite, glucose, and thiocyanate in saliva. Finally, the research directions of saliva analysis are discussed in the conclusion. There have been a lot of researches on μPADs, but the fabrication methods and applications need to be further studied to meet the commercial needs.

This research studied the strategies that players use in sequential adversarial games. We took the Rock-Paper-Scissors (RPS) game as an example and ran players in two experiments. The first experiment involved two humans, who played the RPS together for 100 times. Importantly, our payoff design in the RPS allowed us to differentiate between participants who used a random strategy from those who used a Nash strategy. We found that participants did not play in agreement with the Nash strategy, but rather, their behavior was closer to random. Moreover, the analyses of the participants’ sequential actions indicated heterogeneous cycle-based behaviors: some participants’ actions were independent of their past outcomes, some followed a well-known win-stay/lose-change strategy, and others exhibited the win-change/lose-stay behavior. To understand the sequential patterns of outcome-dependent actions, we designed probabilistic computer algorithms involving specific change actions (i.e., to downgrade or upgrade according to the immediate past outcome): the Win-Downgrade/Lose-Stay (WDLS) or Win-Stay/Lose-Upgrade (WSLU) strategies. Experiment 2 used these strategies against a human player. Our findings show that participants followed a win-stay strategy against the WDLS algorithm and a lose-change strategy against the WSLU algorithm, while they had difficulty in using an upgrade/downgrade direction, suggesting humans’ limited ability to detect and counter the actions of the algorithm. Taken together, our two experiments showed a large diversity of sequential strategies, where the win-stay/lose-change strategy did not describe the majority of human players’ dynamic behaviors in this adversarial situation.

Artificial Neural Network (ANN) techniques have grown rapidly in recent years, due to high computational rate and a good ability to control nonlinear control. This paper presents classical and ANN controllers for headbox parameters. The ANN is simulated and analyzed using MATLAB Simulink. The neural network controller is used to determine real-time values for headbox parameters. A comparison is made between classical and ANN controllers.

To explore whether the brain contains pattern differences in the rock–paper–scissors (RPS) imagery task, this paper attempts to classify this task using fNIRS and deep learning. In this study, we designed an RPS task with a total duration of 25 min and 40 s, and recruited 22 volunteers for the experiment. We used the fNIRS acquisition device (FOIRE-3000) to record the cerebral neural activities of these participants in the RPS task. The time series classification (TSC) algorithm was introduced into the time-domain fNIRS signal classification. Experiments show that CNN-based TSC methods can achieve 97% accuracy in RPS classification. CNN-based TSC method is suitable for the classification of fNIRS signals in RPS motor imagery tasks, and may find new application directions for the development of brain–computer interfaces (BCI).

Paper waste in the mockups design with regular, irregular, and amorphous patterns is a critical problem in digital printing presses. Paper waste reduction directly impacts production costs, generating business and environmental benefits. This problem can be mapped to the two-dimensional irregular bin-packing problem. In this paper, an iterated local search algorithm using a novel neighborhood structure to detect overlaps between amorphous shapes is introduced. This algorithm is used to solve the paper waste problem, modeled as one 2D irregular bin-packing problem. The experimental results show that this approach works efficiently and effectively to detect and correct the overlaps between regular, irregular, and amorphous figures.

In recent times, it has been witnessed that wireless systems based on IoT-based have developed rapidly in various sectors. The IoT (Internet of Things) is the network in which physical devices, equipment, sensors and other objects can communicate among themselves without human involvement. The WSN (Wireless Sensor Network) is a central component of the IoT, which has proliferated into several different applications in real-time. The IoT and WSNs now have various critical and non-critical applications impacting nearly every area of our everyday life. WSN nodes are usually small and battery-driven machines. Thus, the energy effective data aggregation techniques that increase the lifespan of the network are highly significant. Various approaches and algorithms for energy-efficient data aggregation in IoT-WSN systems were presented. This paper reviews the literature with specific attention to aspects of wireless networking for the preservation of energy and aggregation of data.

Triboelectric nanogenerators (TENGs) have been investigated as a promising device to harvest mechanical energy into electricity. At present, paper-based triboelectric nanogenerators (P-TENGs) have been widely researched because paper features with lightweight, low cost, abundance, renewability and biodegradability. In this paper, the operating principles and operation modes of TENGs, the development progress and performance enhancement routes of P-TENGs are comprehensively reviewed. Additionally, the overview, challenges and opportunities of P-TENGs applications are also presented.

The Internet was initially used to transfer data packets between users and data sources with a specific IP address. Due to advancements, the Internet is being used to share data among different small, resource constrained devices connected in billions to constitute the (IOT) Internet of things .In addition, the paper discusses about wireless LAN Wi-Fi technology i.e. wireless local area network protocol and on a larger scale, mobile communication technology, that is used to provide connectivity to the internet, the wide area network. The paper draws an attention towards the background of IOT and its distinction with other technologies, discussion on network optimization in IOT. This paper not only reviews, compares and consolidates the recent related works, but also admires the author’s findings, solutions and discusses its usefulness towards network optimization in IOT. The uniqueness of this paper lies in the review of network optimization issues and challenges in IOT. In this paper, a comprehensive survey on the network optimization in IOT is presented.

One way of exposing predatory journals is to submit a spoof article to see if it gets accepted. We investigate one journal, looking at how it has performed since a spoof paper it accepted came to light. We find that it has published almost 20% more papers following the acceptance of the spoof paper. The journal has a new web site, which appears to show that it did not publish its first paper until 2018. However, there is an old web site that lists 321 papers dating back to 2012. The editors said that this is due to a new workflow system, which meant that previously published papers could not be listed on the new web site. Moreover, the number of papers could be not accommodated, as a high configuration server would be required to provide a responsive web site. We found some plagiarism, which looks quite serious. We conclude that the spoof paper had little effect on the journal, which continues to operate, seven years after the spoof paper was accepted.

This paper introduces the background, concept and definition of the Industry Commons. It initiates a discussion on the positioning of the Industry Commons Ecosystem (ICE) with respect to current research directions in advanced manufacturing and production systems that shape advances in engineering and technology, novel business models and innovation breakthroughs. The potential value of data sharing across industrial domains is estimated at over $100 billion, particularly in view of optimising manufacturing processes. Data sharing across domains however faces a series of well-documented challenges associated with the lack of semantic interoperability and related standards, management of trust and sustainability. Solving bottlenecks in data sharing requires a systemic approach to data management, which can account for all aspects of data use, levels of application, attribution and dynamic exchanges. In this paper we propose a high-level ecosystem approach that integrates societal values with digital affordances of industry's cognitive-assisted processes, remote interfacing, hybrid applications and large-scale value networks. Early development of an Ontology Commons EcoSystem (OCES) is presented as the key enabling framework for Industry Commons interoperability and a series of enabling frameworks form the basis of future research directions in Trusted Data Sharing and Closed-Loop Lifecycle Management for greater sustainability.

PurposeSynergy indicators and social network analysis (SNA), as practical tools, provide the possibility of explaining the pattern of scientific collaboration and visualization of network relations. Recognition of scientific capacities is the basis of synergy. The present study aims to measure and discover the synergistic networks of COVID-19’s top papers at the level of co-authorship, countries, journals, bibliographic couples and titles.Design/methodology/approachThe synergy indicator, co-authorship co-citation network analysis methods were applied. The research population comprises COVID-19’s top papers indexed in Essential Science Indicator and Web of Science Core Collection 2020 and 2021. Excel 2016, UCINET 6.528.0.0 2017, NetDraw, Ravar Matrix, VOSviewer version 1.6.14 and Python 3.9.5 were applied to analyze the data and visualize the networks.FindingsThe findings indicate that considering the three possible possibilities for authors, countries and journals, more redundancy and information are created and potential for further cooperation is observed. The synergy of scientific collaboration has revealed that “Wang, Y,” “USA” and “Science of the Total Environment” have the most effective capabilities and results. “Guan (2020b)” and “Zhou (2020)” are bibliographic couplings that have received the most citations. The keywords “CORONAVIRUS DISEASE 2019 (COVID-19)” were the most frequent in article titles.Originality/valueIn a circumstance that the world is suffering from a COVID-19 pandemic and all scientists are conducting various researches to discover vaccines, medicines and new treatment methods, scientometric studies, and analysis of social networks of COVID-19 publications to be able to specify the synergy rate and the scientific collaboration networks, are not only innovative and original but also of great importance and priority; SNA tools along with the synergy indicator is capable of visualizing the complicated and multifaceted pattern of scientific collaboration in COVID-19. As a result, analyses can help identify existing capacities and define a new space for using COVID-19 researchers’ capabilities.

Headline generation is a challenging subtask of abstractive text summarization, which its output should be a summary, shorter than one sentence. It would be precious to develop a dataset for the evaluation of abstractive summarization methods on this task in the Persian language. There are several datasets for headline generation in Persian, most of which are not large enough to be used by more sophisticated methods of text summarization, such as deep learning models. Moreover, all of these datasets are focused on daily news and there is no dataset for summarizing scientific Persian papers. In this article, we present “ElmNet,” a headline generation dataset of about 400,000 abstract/headline pairs of scientific papers, gathered from six major publishers for scientific articles in Persian. We, moreover, evaluate the performance of the most important deep learning-based headline generation methods, on the proposed dataset. The results prove the comparability of the performance of the state-of-the-art methods on this task, to their results on the existing English datasets.

The use of waste paper as a fibrous semi-finished product in the production of paper and paperboard products makes it possible to somewhat reduce the consumption of cellulose. However, waste paper contains a number of water-polluting components of mineral and organic nature, which were introduced into its composition at the stage of production. One of the issues that may arise in the design of technological systems for the production of a given type of paper or cardboard or in the reconstruction of existing production to reduce losses of fibrous semi-finished products and ensure their optimal use or reduce fresh water consumption is to calculate the pollution and also to determine the impact of cardboard and paper production tanks and treatment plants on the dynamics and level of watercourse pollution. To study and analyze the paper and cardboard production processes, which belong to the class of complex technological systems, a methodology was developed that, using computer technology, allows assessing the state of a technological system until its implementation in action. However, from a practical point of view, methods still should be developed that will allow the designer to find solutions to problems that may arise at the design stage of the technological system for production of a given type of paper or cardboard or in the reconstruction of existing production. These problems are related to the calculation of the pollution level and the determination of impact from cardboard and paper production tanks and treatment facilities. The purpose of this article is to conduct research and forecast calculations based on mathematical models to determine the patterns of influence exerted by tanks on the dynamics and level of watercourse pollution in the production of paper and cardboard. The generalized technological system of cardboard production, which is presented in the form of a material flow graph, is taken as an object for research. Water-soluble contaminants of mineral and organic nature enter the production system together with fibrous raw materials, partly with fresh water, and with chemical additives used to impart certain qualities to the product at the stage of its production and at the stage of mechano-chemical water purification. In order to study their impact, it is necessary to conduct at least two stages of calculations on a personal computer using pre-designed models for the dynamics and level of watercourse pollution. At the first stage, the dynamic characteristics of each element of the technological system were equated to elements that do not have a dynamic delay and for which the passage of all watercourses is subject to the speed at which the cardboard web is cast on the mesh. The number of cycles before equilibrium is 99. In the second stage of calculations, it was taken into account that the four tanks in the technological system of production are characterized by a moment of delay and, therefore, the values ​​of delay factors were chosen based on water reserves that accumulate in these basins. The number of cycles before equilibrium in the second stage increased to 264. The main conclusion from the analysis of two options: the technological system in both cases goes to equilibrium at equal values ​​for all components of water-soluble mineral and organic components. However, there are often situations when, in the process of developing (designing) a complex technological system for the production of paper or cardboard, developers are interested in the weighted average concentration of water-soluble mineral components that most affect the state of water flows, and then the technological system can be simplified and presented as a single container linked to the environment. Analysis of the calculation formula of the time for the technological system to reach equilibrium shows that the time value is largely determined by the ratio of the water capacity (W) of the process system to the amount of water (BS) removed from the system. The greater the water capacity of the technological system and the smaller the BS, the longer the time the technological system reaches equilibrium. The next step of the study is to verify the results obtained on the basis of adequate mathematical models in actual production conditions.

Cloud computing is an architecture for facilitating computing service through the internet on requirement and pay per use access to a group of shared resources namely networks, storage, servers, services and applications, without physically acquiring them Cloud DBMS is a distributed database that gives computing as a service. It is sharing of web infrastructure for resources, software and information over a network. The cloud is used as a storage location and database can be accessed and computed from anywhere. In this paper I have discussed about cloud and its use. How we can implement cloud for better performance and different benefits and drawbacks of cloud which we can improve in future Cloud computing has received increasing interest from enterprises since its inception. With its innovative information technology (IT) services delivery model, cloud computing could add technical and strategic business value to enterprises. However, cloud computing poses highly concerning internal (e.g., Top management and experience) and external issues (e.g., regulations and standards). This paper presents a systematic literature review to explore the current key issues related to cloud computing adoption. This is achieved by reviewing 15 articles published about cloud computing adoption. Using the grounded theory approach, articles are classified into eight main categories: in-ternal, external, evaluation, proof of concept, adoption decision, implementation and integration, IT governance, and confirmation. Then, the eight categories are divided into two abstract categories: cloud computing adoption factors and processes, where the former affects the latter. The results of this review indicate that enterprises face serious issues before they decide to adopt cloud computing. Based on the findings, the paper provides a future information systems (IS) research agenda to explore the previously under-investigated areas regarding cloud computing adoption factors and processes. This paper calls for further theoretical, methodological, and empirical contributions to the research area of cloud computing adoption by enterprises.

Activating flux is made up of inorganic material mixed with a volatile medium. The objective of this study is to identify and review the literature in activating flux, and different type of welding techniques. For that purpose, a structured review method is adopted and the Scopus database is used as a primary source for the selection of papers. The papers were identified using the string term of “Activating flux” OR “Activated flux” in the title of papers. And a total of 238 papers were identified for the study. Besides the above few other papers were also reviewed and the materials used, the type of flux used, and the findings of different combinations were highlighted in the form of tables. The findings of the study provide a comprehensive understanding of the different type of welding techniques focusing on TIG welding, and the different combination of flux used and their impact was summarized.

Space Resource Utilization could reduce the mass, cost, and risks of future space activities. The many nonlinear and compounding effects mean that seemingly insignificant concept of operations choices can invalidate the conclusions of sophisticated analyses. Here we successively relax self-imposed constraints in a recent publication to demonstrate that the proximity of a market and the benefits of aerobraking cannot be omitted.

Text summarization is one problem in natural language processing that generates a brief version of the original document. This research took attention for some researchers in this last decade and growing fast, including Indonesia language. This paper aims to recap summarization text research especially in Indonesia language. As usual, this paper discusses two summarization approaches, extractive and abstractive. In fact, the number of research of extractive is more than abstractive. This paper investigates some methods such as Statistical Based Approach, Graph Based Approach, Machine Learning Approach, Fuzzy Logic Approach, Algebraic Approach, and Hybrid Approach. This paper shows some methods details and summarize the results. Keywords— Text summarization, extractive summary, abstractive summary, natural language processing

Many Indonesian spelling errors occur in research papers published to the public, closely related to academics in all institutions such as research institutions, government, schools, and universities. The spelling errors usually writing punctuation, writing letters, writing words, writing words originating from foreign or regional languages (uptake words), using affixed words, and writing ineffective sentences. The mistakes made by the academics then become a cycle in the academic environment. They usually provide guidance for writing an undergraduate thesis, thesis, dissertations to students, or the other forms of documents and scientific papers. Therefore, the research proposed the application to facilitate all authors of scientific papers in producing quality scientific works based on the General Guidelines for Indonesian Spelling published by the Agency for Development and Language Development. The application is named KEBI 1.0 Checker (Indonesian Spelling Error 1.0 Checker), a web-based application with a built-in algorithm to detect and correct Indonesian Spelling in scientific papers. The experiment result shows that the application has given the best accuracy performance to correct the non-standard words, and typographical errors reached 100% and 55,52%, respectively. The application also has been detected 209 meaningless words. The application processing time is relatively low, the average time needed to correct non-standard words is 0.016 seconds, and typo words are 14.58 seconds. KEBI 1.0 Checker is helpful for the end-user in academics but needs to improve the vocabulary of the large corpus in various fields of science for correcting typo words.

Summary Objective: To identify and highlight research papers representing noteworthy developments in signals, sensors, and imaging informatics in 2020. Method: A broad literature search was conducted on PubMed and Scopus databases. We combined Medical Subject Heading (MeSH) terms and keywords to construct particular queries for sensors, signals, and image informatics. We only considered papers that have been published in journals providing at least three articles in the query response. Section editors then independently reviewed the titles and abstracts of preselected papers assessed on a three-point Likert scale. Papers were rated from 1 (do not include) to 3 (should be included) for each topical area (sensors, signals, and imaging informatics) and those with an average score of 2 or above were subsequently read and assessed again by two of the three co-editors. Finally, the top 14 papers with the highest combined scores were considered based on consensus. Results: The search for papers was executed in January 2021. After removing duplicates and conference proceedings, the query returned a set of 101, 193, and 529 papers for sensors, signals, and imaging informatics, respectively. We filtered out journals that had less than three papers in the query results, reducing the number of papers to 41, 117, and 333, respectively. From these, the co-editors identified 22 candidate papers with more than 2 Likert points on average, from which 14 candidate best papers were nominated after intensive discussion. At least five external reviewers then rated the remaining papers. The four finalist papers were found using the composite rating of all external reviewers. These best papers were approved by consensus of the International Medical Informatics Association (IMIA) Yearbook editorial board. Conclusions. Sensors, signals, and imaging informatics is a dynamic field of intense research. The four best papers represent advanced approaches for combining, processing, modeling, and analyzing heterogeneous sensor and imaging data. The selected papers demonstrate the combination and fusion of multiple sensors and sensor networks using electrocardiogram (ECG), electroencephalogram (EEG), or photoplethysmogram (PPG) with advanced data processing, deep and machine learning techniques, and present image processing modalities beyond state-of-the-art that significantly support and further improve medical decision making.

The printing effect of paper packaging has an impact on the circulation effect of products. Only when the printing effect is good can it attract consumers’ purchasing desire. In this study, based on color management technology, the printing of the designed Bazhong specialty paper packaging was studied. Firstly, the content and process of color management were analyzed, and equipment correction and characterization were introduced. Then, the printing process of Bazhong specialty paper packaging was explored, and the printing equipment and the establishment of the profile file were analyzed. The application of color management achieves a high-quality printing effect, which provides a theoretical reference for its further application in the printing industry.

Scientific research cooperation and co-authored papers are becoming increasingly popular in the era of big science. However, allocating appropriate credit to each co-author of papers remains a challenge. We consider author contribution declarations according to the contributor roles taxonomy (CRediT) scheme (assigning each co-author to 14 contributor roles) and propose a new method of author contribution to allocate co-authors’ credits reasonably by converting the 14 contributor roles in an article into a binary author-role matrix. Based on the data of PLOS ONE, we further explore the new method’s advantages by comparing with other representative methods: It normalizes the total credits of different articles to 1, avoiding the inflationary bias caused by the increasing number of co-authors; awards different credits per co-author based on the participation rate of contributor roles to avoid the equalization bias; reduces the impact of the increasing number of co-authors on the credit of the first co-author.