Search

The emerging demands for healthcare where access is limited due to political, environmental, or socio-economic factors have been driving research into bio-medical devices that perform in both diagnostic and therapeutic roles at lower costs and greater accessibility. Paper microfluidic devices are used in many applications, particularly medical diagnostics and offer an excellent combination of utility and low cost making them particularly valuable in resource-limited applications and point-of-care usage across a wide variety environmental conditions. Microfluidic biological diagnostics continue to mature as researchers discover new ways to exploit the technological possibilities, and address liabilities. The increasing complexity of paper-based microfluidic devices beyond home pregnancy tests is driving the need to produce new tools and methodologies that enable more robust biological diagnostics and potential therapeutic applications. However, the process of developing new paper microfluidic devices is limited due to having to manually design and fabricate designs to research. Often, researchers must design scores of different devices to find a combination of parameters that functions as expected. In this work, a novel software framework to support automated development of paper-based microfluidic devices is introduced to facilitate both research and fabrication to accelerate the investigative process and reduce material utilization and manpower. Unlike to existing lab-on-a-chip technologies, paper-based microfluidics differs in terms of substrate technologies and use a passive flow method to deliver fluids and reagents for assays. While numerous analogies between microfluidics and semiconductor technologies have been espoused, the physical differences between the fluid dynamics and electrical current are significant which suggests that current trends in physical design for microfluidics must change course in order to be of practical use to designers. Within this framework, a methodology is introduced to address design automation such as dynamically placing and routing microfluidic components in a non-discrete design space while avoiding invalid design layouts, accounting for fluid volume usage, surface area utilization, and the timing required to perform specified biological assays and also optimizing device parameters, enabling researchers to focus on the science and thereby accelerating the development of new, low-resource paper microfluidic devices for a developing world.

This work presents a unique approach to the design, fabrication, and characterization of paper-based origami robotic systems consisting of stackable pneumatic actuators. These paper-based actuators (PBAs) use materials with high elastic modulus-to-mass ratios, accordion-like structures, and direct coupling with pneumatic pressure for extension and bending. The study contributes to the scientific and engineering understanding of foldable components under applied pneumatic pressure by constructing stretchable and flexible structures with intrinsically nonstretchable materials. Experiments showed that a PBA possesses a power-to-mass ratio greater than 80 W/kg, which is more than four times that of human muscle. This work also illustrates the stackability and functionality of PBAs by two prototypes: a parallel manipulator and a legged locomotor. The manipulator consisting of an array of PBAs can bend in a specific direction with the corresponding actuator inflated. In addition, the stacked actuators in the manipulator can rotate in opposite directions to compensate for relative rotation at the ends of each actuator to work in parallel and manipulate the platform. The locomotor rotates the PBAs to apply and release contact between the feet and the ground. Furthermore, a numerical model developed in this work predicts the mechanical performance of these inflatable actuators as a function of dimensional specifications and folding patterns. Overall, we use stacked origami actuators to implement functionalities of manipulation, gripping, and locomotion as conventional robotic systems. Future origami robots made of paper-like materials may be suitable for single use in contaminated or unstructured environments or low-cost educational materials.

Background The screening of biological hazards, chemical contaminants and allergens in food products is a major concern of food industry since they can cause serious illnesses and even lead to death. Therefore, there is a significant interest in developing low-cost, robust, and rapid detection methods for food safety and quality analysis. Conventional methods provide accurate analytical characteristics, but require well-equipped laboratories, trained personnel, costly reagents, and complicated sample preparation procedures prior to the detection in order to obtain reliable results. Hence, they are not always ideal for on-site food surveillance. Scope and approach This paper discusses the fundamentals of microfluidic paper-based analytical devices (μPADs) and reviews the recent progress in their usage for screening biological hazards, harmful chemical residues, and allergens in food products to systematically evaluate the strengths and weaknesses of this technology. It then covers future trends and useful strategies that could be employed in μPADs design and fabrication procedures to address the critical challenges in equipment-free food analysis. Key findings and conclusions μPADs offer promising avenues to revolutionize food safety and quality analysis with merits of equipment-free sample preparation and detection at low-cost. Despite the advancement in the microfluidic technology, the manufacturing of user-friendly sample-to-answer μPADs still requires intensive research studies to be employed for robust and sensitive food safety and quality analysis.

A precoding technique based on polar codes and probabilistic shaping is introduced for dirty paper coding. Two variants of the precoding use multi-level shaping and sign-bit shaping in one dimension. The decoder uses multi-stage successive-cancellation list decoding with list-passing across the bit levels. The approach achieves approximately the same frame error rates as polar codes with multi-level shaping over standard additive white Gaussian noise channels at a block length of 256 symbols and with different amplitude shift keying (ASK) constellations.

The pulp and paper industry is highly energy-intensive. In mills that use chemical pulping, roughly half of the higher heating value of the cellulosic material used to manufacture the product typically is incinerated to generate steam and electricity that is needed to run the processes. Additional energy, much of it non-renewable, needs to be purchased. This review considers publications describing steps that pulp and paper facilities can take to operate more efficiently. Savings can be achieved, for instance, by minimizing unnecessary losses in exergy, which can be defined as the energy content relative to a standard ambient condition. Throughout the long series of unit operations comprising the conversion of wood material to sheets of paper, there are large opportunities to more closely approach a hypothetical ideal performance by following established best-practices.

In today’s era the content based video retrieval are major challengesdue to large storage, transmission, and downloading of videos. Video is retrieve based on visual content. Most of the researchers worked on low-level pixel content like shape, color and texture. In this paper, we review the content based video retrieval by using high-level features such as the spatio-temporal domain and review on the latest methods adopted by the researcher for video retrieval. The state-of-the-art of this paper mainly focuses on a review of video retrieval, its challenges, parameters consideration, and techniques that are to be incorporated.

Papers are the most commonly used substrates. A printable paper must have certain properties. These properties include surface smoothness, air permeability, surface energy, colour of the paper, opacity, whiteness, light fastness, gloss, and coefficient of elongation under force. In addition, a good printable paper should not allow ink to pass between its two surfaces. After the papers are produced, they are subjected to surface treatments in order to improve the above-mentioned properties and to provide extra specification. Surface treatments include calendering, surface sizing and coating processes. While filling the recesses and protrusions on the surface with the coating process, the paper's affinity for the ink is increased, and the penetration of the ink to the other surface of the paper is prevented. In the coating process basically, a filler is dispersed in a binder. In this study, it is aimed to obtain the highest quality and most printable paper by changing the type of binder used in the coating. In this study, equal amount (5% w/w) titanium dioxide filler was used in all coating formulations. In coating formulations; cationic starch, hydroxy ethyl cellulose and polyvinyl alcohol polymers were used as binders. Binder amounts are adjusted according to optimum viscosity. The obtained coating formulations were coated on the paper surface with a laboratory type coating device. Colour, gloss, surface smoothness, air permeability, surface energy and surface morphology of the coated papers were determined. It was printed with magenta offset printing ink on three different types of paper coated with different binders, using the IGT C1 offset printability test device, under 400 N/m2 pressure printing conditions. Colour and gloss measurements of the prints were made. As a result; It was determined that three different binders improved the printability parameters.

Herein, we describe the development of a paper-based device to detect nucleic acids of pathogens of interest in complex samples using loop-mediated isothermal amplification (LAMP) by producing a colorimetric response visible to the human eye. To demonstrate the utility of this device in emerging public health emergencies, we developed and optimized our device to detect SARS-CoV-2 in human saliva without preprocessing. The resulting device was capable of detecting the virus within 60 min and had an analytical sensitivity of 97% and a specificity of 100% with a limit of detection of 200 genomic copies/μL of patient saliva using image analysis. The device consists of a configurable number of reaction zones constructed of Grade 222 chromatography paper separated by 20 mil polystyrene spacers attached to a Melinex® backing via an ARclean® double-sided adhesive. The resulting device is easily configurable to detect multiple targets and has the potential to detect a variety of pathogens simply by changing the LAMP primer sets.

We report a colorimetric paper-based microfluidic device based on an enzyme inhibition assay that allows the on-site detection of nerve agents by sampling and wicking. The sample and reagents are automatically transported through the channel where an enzyme inhibition reaction is conducted, followed by an enzyme-substrate reaction and a color reaction. This device can detect 0.1 μg/mL of the nerve agent VX in a 2.5 μL drop and is nerve agent selective and robust against temperature, pH, and several liquids. We confirmed that sampling procedures (dilution and wiping) are applicable to this device. Furthermore, the fabrication procedure is easy, and the cost is at most a few tens of cents. Thus, the present device provides a practical method for the urgent detection of nerve agents in suspected chemical terrorism incidents.

Around 60% of the paper worldwide is made from recovered paper. Especially adhesive contaminants, so called stickies, reduce paper quality. To remove stickies but at the same time keep as many valuable fibers as possible, multi-stage screening systems with several interconnected pressure screens are used. When planning such systems, suitable screens have to be selected and their interconnection as well as operational parameters have to be defined considering multiple conflicting objectives. In this contribution, we present a Mixed-Integer Nonlinear Program to optimize system layout, component selection and operation to find a suitable trade-off between output quality and yield.

This chapter mainly focuses on the recent developments made in rapid detection of cancer cells using novel paper-based analytical devices (PADs). Due to their simplicity, portability and biocompatibility, PADs have gained great attention in recent years for rapid detection of biomarkers. Since cancer has become an increasing worldwide concern, there stands an imminent requirement for minimally invasive detection and monitoring techniques. The progress made in paper-based detection of cancer biomarkers has proven to hold great potential for the development of point-of-care (POC) diagnostic devices for early detection of tumor cells. In this chapter, after an introduction on paper diagnosis, we will provide a brief explanation on the fabrication methods used for PADs. Then recently developed sensors based on colorimetric, fluorescence, chemiluminescence (CL), electrochemical, electrochemiluminescence (ECL) and surface-enhanced Raman scattering (SERS) techniques will be elaborated. In the end, current limitations and problems hindering the commercialization of paper-based sensors will be pointed out.

Over the last few years, the microfluidics phenomenon coupled with the Internet of Things (IoT) using innovative nano-functional materials has been recognized as a sustainable and economical tool for point-of-care testing (POCT) of various pathogens influencing human health. The sensors based on these phenomena aim to be designed for cost-effectiveness, make it handy, environment-friendly, and get an accurate, easy, and rapid response. Considering the burgeoning importance of analytical devices in the healthcare domain, this review paper is based on the gist of sensing aspects of the microfabricated paper-based analytical devices (μPADs). The article discusses the various used design methodologies and fabrication approaches and elucidates the recently reported surface modification strategies, detection mechanisms viz., colorimetric, electrochemical, fluorescence, electrochemiluminescence, etc. In a nutshell, this article summarizes the state-of-the-art research work carried out over the nano functionalized paper-based analytical devices and associated challenges/solutions in the point of care testing domain.

The COVID-19 pandemic has resulted in significant global social and economic disruption. The highly transmissive nature of the disease makes rapid and reliable detection critically important. Point-of-care (POC) tests involve performing diagnostic tests outside of a laboratory that produce a rapid and reliable result. It therefore allows the diagnostics of diseases at or near the patient site. Paper-based POC tests have been gaining interest in recent years as they allow rapid, low-cost detection without the need for external instruments. In this review, we focus on the development of paper-based POC devices for the detection of SARS-CoV-2. The review first introduces the principles of detection methods that are available to paper-based devices. It then summarizes the state-of-the-art paper devices and their analytical performances. The advantages and drawbacks among methods are also discussed. Finally, limitations of the existing devices are discussed, and prospects are given with the hope to identify research opportunities and directions in the field. We hope this review will be helpful for researchers to develop a clinically useful and economically efficient paper-based platform that can be used for rapid, accurate on-site diagnosis to aid in identifying acute infections and eventually contain the COVID-19 pandemic.

The field of information security, in general, has seen shifts a traditional approach to an intelligence system. Moreover, an increasing of researchers to focus on propose intelligence systems and framework based on the forensic case studies because of the limitations of traditional methods such as analysis intensive data manually, intelligence visualization to make the evidence more understandable and intelligence system for store data. However, most of these intelligence systems are still facing different limitations. Furthermore, the primary goal of this work analysis popular intelligence system that was used based on forensic. Moreover, propose new algorithms and hybrid model which it's achieved good results in dif-ferent other fields to develop the forensic systems in the future.

This chapter presents and discusses the most usual methodologies for colorimetric detection on paper-based analytical devices (PADs). State of the art associated with pioneering, popularity, physical aspect, surface modifications, instrumental and instrumental-free colorimetric measurements are carefully presented. Moreover, a side-by-side comparison among the most usual colorimetric detection modes on PADs was performed using a well-known complexometric reaction model. The pros and cons were discussed to show their advantages for chemical analysis.