Search

Copyright of Studia Ecologiae et Bioethicae is the property of Uniwerystet Kardynala Stefana Wyznskiege w Warzawie and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The energy needed for the dewatering and drying of wet paper web represents around half of the energy consumption of papermaking processes. The present work examined whether the dewatering and drying of paper could be enhanced during a previous pulp drying process by pretreating the fibers with polyamide-epichlorohydrin (PAE). According to the hypothesis, the cured PAE restrains swelling and water absorption of water-wetted fibers by forming a fiber-bound, self-crosslinked polymernetwork on the fiber surfaces. The hypothesis was tested by adding PAE to never-dried kraft pulp slurry followed by pulp thickening, drying, and final curing of the PAE-resin. After this, the PAE-treated fibers were dispersed in water, and their water retention values (WRV) and Shopper-Riegler values (°SR) were measured. The PAE pretreatments notably decreased the fibers' WRV and °SR, indicating improved water removal of paper web in the paper machine forming and drying section. Compared to chemical crosslinking pretreatments, which also can be used to decrease fibers WRV and °SR-value, a notable advantage of PAE-pretreatment is milder required curing conditions of the PAE, which makes implementation of the method easier in practice. Due to decreased fiber-to-fiber bonding capability, the PAE-treated specialty fibers could take advantage especially as a bulking aid of paperboard, tissue, and absorbent materials. [ABSTRACT FROM AUTHOR]

Copyright of Environmental & Social Management Journal / Revista de Gestão Social e Ambiental is the property of Environmental & Social Management Journal and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The pulp and paper industry (PPI) has several opportunities to contribute to meeting prevailing climate targets. It can cut its own CO2 emissions, which currently account for 2% of global industrial fossil CO2 emissions, and it has an opportunity to produce renewable energy, fuels, and materials for other sectors. The purpose of this study is to improve understanding of the decarbonization prospects of the PPI. The study provides insights on the magnitude of needed annual renewal rates for several possible net-zero target years of industrial fossil CO2 emissions in the PPI and discusses decarbonization opportunities, namely, energy and material efficiency improvement, fuel switching, electrification, renewable energy production, carbon capture, and new products. The effects of climate policies on the decarbonization opportunities are critically evaluated to provide an overview of the current and future business environment of the European PPI. The focus is on Europe, but other regions are analyzed briefly to widen the view. The analysis shows that there are no major technical barriers to the fossil-free operation of the PPI, but the sector renovates slowly, and many new opportunities are not implemented on a large scale due to immature technology, poor economic feasibility, or unclear political environment. [ABSTRACT FROM AUTHOR]

NiFe2O4 material is grown on carbon paper (CP) with the hydrothermal method for use as electrocatalysts in an alkaline electrolyzer. NiFe2O4 material is used as the anode and cathode catalysts (named NiFe(+)/NiFe(−) hereafter). The results are compared with those obtained using CP/NiFe as the anode and CP/Ru as the cathode (named NiFe)(+)/Ru(−) hereafter). During cell operation with NiFe(+)/Ru(−), the current density reaches 500 mA/cm2 at a cell voltage of 1.79 V, with a specific energy consumption of 4.9 kWh/m3 and an energy efficiency of 66.2%. In comparison, for NiFe(+)/NiFe(−), the current density reaches 500 mA/cm2 at a cell voltage of 2.23 V, with a specific energy consumption of 5.7 kWh/m3 and an energy efficiency of 56.6%. The Faradaic efficiency is 96–99%. With the current density fixed at 400 mA/cm2, after performing a test for 150 h, the cell voltage with NiFe(+)/Ru(−) increases by 0.167 V, whereas that with NiFe(+)/NiFe(−) decreases by only 0.010 V. Good, long-term stability is demonstrated. [ABSTRACT FROM AUTHOR]

Although there are opportunities to reduce electrical energy demand in unit processes of mechanical pulp-based paper and paperboard production, this may not be financially beneficial. This is generally because energy optimization opportunities connected to reduced refiner electricity demand in mechanical pulping systems also results in less steam available for the drying of the paper. As modern high consistency refiner systems produce approximately one ton of steam for each MWh of electricity when producing one ton of pulp, a reduction in electric energy demand leads to increased fuel demand in steam boilers to compensate for the steam shortage. In this study, we investigated what the financial and environmental situation would look like if we were to expand the system border from a paper mill to a larger system consisting of a mechanical pulp-based paper or paperboard mill, a district heating system with an incineration boiler and a chemical pulp mill. Mechanical pulp production has a wood to product yield of >90%, a high electric energy demand to separate woodchips to pulp and is a net producer of heat and steam while chemical pulp-based production has a wood to product yield of 50%, a low electric energy demand and is a net heat and electricity producer due to the combustion of dissolved wood polymers. The aim of this research is to create useful and robust models of how to use excess heat from certain industry sites to cover the steam shortage in other industry sites by means of utilizing and optimizing the district heating systems connecting these sites. For this purpose, we used a simulation tool which dynamically allows us to evaluate different scenarios. Our results shows that there is great potential to reduce both carbon dioxide emissions and production costs for industry sites and society by means of these tools. [ABSTRACT FROM AUTHOR]

The article presents studies on the impact of the significant process parameters of a paper machine with a Yankee cylinder on its production capacity and heat energy consumption for drying the paper web. Parameters such as machine speed, web moisture content before and after pressing, parameters of steam supplied to the cylinder and parameters of hot air flowing from the nozzles of the hood were analyzed. The study's results were used to optimize production to improve the energy efficiency and performance of the machine. In order to use the possible methods of improving the production capacity and heat energy consumption, the parameters of the production process were measured and the basic indicators characterizing the operation of the machine were calculated in the Yankee cylinder–dryer hood system. The correct functioning of the machine components and the possibility of their modernization were also analyzed. Technological and construction changes introduced based on the research results made it possible to increase the production capacity by 10% and to reduce the consumption of heat energy per 1 ton of produced paper by 16.3%. The article presents a description of changes in the technology of paper production and modernization of the tissue machine made in the years 2013–2022. [ABSTRACT FROM AUTHOR]

State-of-the-art manufacturing of tissue paper by Through Air Drying provides excellent product performance, although at a high production cost and energy use. In this work, a laboratory scale vacuum suction box was used to mimic the initial dewatering and the Through Air Drying molding, together with a pilot-scale trial. The purpose was to investigate both how the laboratory scale corresponds to pilot scale testing and investigate how fabric design, basis weight, beating, and fibers affect dewatering and sheet caliper. This study reevaluates dewatering mechanisms during molding, challenging the previous hypothesis of pure air displacement dewatering. Results show a parallel mechanism of compression dewatering and air displacement. The influence of rush transfer is examined, impacting the sheets' visual appearance, thickness, and solids content. Correlations between molding box solids content and headbox freeness emphasize significance of fibers and beating levels. Pilot results confirm the link between former solids and molding box solids. Pilot trials validate the laboratory results, facilitating comprehensive simulation of full-scale manufacturing. This research reveals dewatering mechanisms, highlights operational parameters, and enables effective Through Air Drying process design and refinement. [ABSTRACT FROM AUTHOR]

This paper studies the impact of digital economy development on carbon emissions, which is a hot topic in the field of environmental economics. This topic is within the scope of the Frontiers in Environmental Science and is particularly in line with the theme of Environmental Economics and Management section in the journal. Firstly, this paper constructs the Digital Economy Development Index and its variable indicators to measure the development of the digital economy. Secondly, this paper uses urban panel data to reveal the impact of digital economy development on carbon emissions, and further adopts IV method to deal with endogeneity issues. Thirdly, this paper performs the heterogeneity analyses depending on the characteristics of the city. The results can provide a basis for formulating differentiated policies. Fourthly, this paper further explores the mechanism by which the digital economy affects carbon peaking. The results show that the digital economy may influence carbon peaking through upgrading of the industrial structure, technical innovation, and energy consumption. [ABSTRACT FROM AUTHOR]

In the field of intelligent transportation, the planning of traffic flows that meet energy-efficient driving requirements necessitates the acquisition of energy consumption data for each vehicle within the traffic flow. The current methods for calculating vehicle energy consumption generally rely on longitudinal dynamics models, which require comprehensive knowledge of all vehicle power system parameters. While this approach is feasible for individual vehicle models, it becomes impractical for a large number of vehicle types. This paper proposes a digital model for vehicle driving energy consumption using vehicle speed, acceleration, and battery state of charge (SOC) as inputs and energy consumption as output. The model is trained using an optimized CNN-BiLSTM-Attention (OCBA) network architecture. In comparison to other methods, the OCBA-trained model for predicting PHEV driving energy consumption is more accurate in simulating the time-dependency between SOC and instantaneous fuel and power consumption, as well as the power distribution relationship within PHEVs. This provides an excellent framework for the digital modeling of complex power systems with multiple power sources. The model requires only 54 vehicle tests for training, which is significantly fewer than over 2000 tests typically needed to obtain parameters for power system components. The model's prediction error for fuel consumption under unknown conditions is reduced to 5%, outperforming the standard error benchmark of 10%. Furthermore, the model demonstrates high generalization capability with an R2 value of 0.97 for unknown conditions. [ABSTRACT FROM AUTHOR]

This mini‐review summarises and discusses recent findings form the literature on the degradation of carbon‐based electrodes for vanadium redox flow batteries (VRFBs). It becomes evident that the focus of current investigations is on carbon paper, carbon felt and graphite felt electrodes, which is understandable from a practical point of view. However, the structural complexity of these materials often prohibits doubtless attribution of observed performance reduction (or increase) to changes in the electrode materials. Among the discussed major causes for degradation are formation or change of surface functional groups, changes in the carbon sp2/sp3 ratio, intercalation of ions as well as formation of inhibiting adsorbates. In order to gain deeper insight into the changes of carbon electrodes in VRFBs under relevant operation conditions, the authors suggest reducing complexity of the investigated materials and applying in situ‐studies under well‐defined and controllable conditions on model electrodes. These studies then should be extended towards more practical systems and may finally help to reduce degradation phenomena including enhanced overvoltages and thus could improve cycling and energy efficiency as well as long‐term stability of vanadium redox flow batteries. [ABSTRACT FROM AUTHOR]

Carbon emissions from the Yangtze River Economic Belt are an important element of China's carbon emission endeavor, and a study of its emission reduction pathway can provide a reference for the country's overall management of carbon emission reduction. From the perspective of energy consumption, this paper uses the carbon emission factor method to estimate the carbon emissions of the transportation industry in the Yangtze River Economic Belt during 2006–2020, based on the extended STIRPAT model, considering the influence of seven factors, i.e., population size, urbanization rate, GDP per capita, transportation added value, energy structure, energy intensity, and transportation intensity, on carbon emissions. Based on these factors, a scenario analysis, combined with a forecasting model, is used to predict the peak carbon performance of the transportation industry under different development scenarios. The results show that the overall carbon emissions of transportation in the YEB from 2006 to 2020 show a fluctuating upward trend, and the downstream carbon emissions are significantly higher than those in other regions. The main factors influencing carbon emissions from transportation in different upstream, midstream, and downstream regions vary, with both population and economic factors contributing to carbon emissions, while technical factors affect them differently. There are significant differences in the peak carbon performance of transportation under different development scenarios, and the government should take effective measures to work towards achieving the goals of the low-carbon or enhanced low-carbon scenarios. [ABSTRACT FROM AUTHOR]

Producing tissue paper is an energy-demanding process; a significant amount of energy is expended when removing water by vacuum, mechanical pressing, and thermal drying. Because the water is most energy-demanding to remove in drying, making the preceding step of vacuum dewatering more efficient would benefit the whole process. This article focuses on developing a laboratory-scale method for verifying the nature of diminishing returns of water removal and investigating efficiency strategies of the vacuum dewatering. The theoretical concept of successive vacuum suction boxes with progressing vacuum levels was tested at the laboratory scale in order to show quantifiable results of the previously solely theoretical concept. The results confirmed that vacuum dewatering can be improved by adding progressively higher vacuum levels and that such a practice can benefit both outgoing dryness levels and expended vacuum pump energy. To truly examine the power of progression of vacuum levels, rewetting can be included in the calculations, by using an approximate value collected from pilot or fullscale measurements. For any new fiber mix, pulp type, vacuum level setup, basis weight, etc. the vacuum levels, rewetting, and dwell times need to be tuned to that specific case. [ABSTRACT FROM AUTHOR]

Recently, as the use of wearable devices and the demand for eco-friendly energy have increased, many studies have been conducted on triboelectric nanogenerators (TENGs), which can economically harvest energy. Paper is considered a promising substrate and frame material that can be used to manufacture self-powered TENGs, owing to its flexibility, low cost, and accessibility. Herein, we present a sandwich-structured foldable paper-based TENG (FP-TENG) that comprises flexible materials and uses paper as a substrate. The FP-TENG can generate up to 572 mW/m2 of power via contact–separation of the triboelectric electrified body at the top and bottom. With more folds of the FP-TENG, the triboelectric cross-sectional area increases, and, thus, the electrical output increases. In addition, the proposed TENG exhibits excellent durability without signal degradation under 5000 cycles of repeated pushing motions. To demonstrate its practicality, the FP-TENG was manufactured in the form of a wristwatch Velcro and connected to an electronic watch panel to supply power. Various deformations are possible with origami, and they can drive wristwatches through external forces. Therefore, the FP-TENG is expected to be utilized as a sustainable and promising eco-friendly energy source for small electronic devices. [ABSTRACT FROM AUTHOR]

Black-liquor-thickening in an integrated multi-effect evaporation plant consumes substantial amounts of steam produced in pulp and paper mills, and its efficient operation is, thus, crucial. Industrial applications of heat pumps in the pulp and paper industry, especially in black liquor evaporation, show promise in terms of cutting energy consumption and in decarbonizing this industrial branch. Modelling of such a plant includes momentum, heat and mass transfer issues, enriched with black liquor material specification. An existing black liquor evaporation plant which thickens inlet black liquor from 17% to 75% wt. dry solids with a dry solid flow of 2500 tonnes per day is considered. It already includes a MVR (mechanical vapor recompression) pre-evaporator as well as water-condensate stripping columns. A mathematical model of this plant is created in a Matlab environment and, after verification of obtained results, it serves for analyses of possible plant modifications. Among the modification options, installation of a second MVR is modeled and its impact on the whole plant is examined. As a result, a differential (marginal) change in steam and electricity consumed in the plant is obtained. Model results indicate the possibility of a reduction of process steam consumption of around 10 tonnes per hour and an increase in electricity consumption of 600 kW. A favorable simple payback period of 2.5 years can be expected for the considered investment. [ABSTRACT FROM AUTHOR]

Internet of Things (IoT) architectures generally focus on providing consistent performance and reliable communications. The convergence of IoT, edge, fog, and cloud aims to improve the quality of service of applications, which does not typically emphasize energy efficiency. Considering energy in IoT architectures would reduce the energy impact from billions of IoT devices. The research presented in this paper proposes an optimization framework that considers energy consumption of nodes when selecting a node for processing an IoT request in edge-fog-cloud layered architecture. The IoT use cases considered in this paper include smart grid, autonomous vehicles, and eHealth. The proposed framework is evaluated using CPLEX simulations. The results provide insights into mechanisms that can be used to select nodes energy-efficiently whilst meeting the application requirements and other network constraints in multi-layered IoT architectures. [ABSTRACT FROM AUTHOR]

In order to achieve an increase in the profitability of tissue paper production, this research aimed to identify factors that affect the degree of pulp refinement and the tension index of the tissue paper when using short fiber, long fiber and Quimizine B enzyme. The methodology considered laboratory experiments, obtaining refining curves, multilevel factorial design and response surface diagrams. The results indicated that the most significant common factor in the pulp refining degree and tension index is the specific energy consumption for both types of fiber, and that optimal operating parameters can be known by analyzing the refining degree and tension index independently and simultaneously. It was concluded that the multilevel factorial design allowed to identify significant factors that influence the properties of the refining degree and the resistance of tissue paper when looking for an individual and simultaneous optimum and, that the influence of the enzyme increased the properties of the refining degree and the tensile strength of the paper when using raw material of short and long fiber from Eucalyptus globulus and Pinus radiata, respectively. [ABSTRACT FROM AUTHOR]

The energy needed for the dewatering and drying of wet paper web represents around half of the energy consumption of papermaking processes. The present work examined whether the dewatering and drying of paper could be enhanced during a previous pulp drying process by pretreating the fibers with polyamide-epichlorohydrin (PAE). According to the hypothesis, the cured PAE restrains swelling and water absorption of water-wetted fibers by forming a fiber-bound, self-crosslinked polymer-network on the fiber surfaces. The hypothesis was tested by adding PAE to never-dried kraft pulp slurry followed by pulp thickening, drying, and final curing of the PAE-resin. After this, the PAE-treated fibers were dispersed in water, and their water retention values (WRV) and Shopper-Riegler values (○SR) were measured. The PAE pretreatments notably decreased the fibers´ WRV and ○SR, indicating improved water removal of paper web in the paper machine forming and drying section. Compared to chemical crosslinking pretreatments, which also can be used to decrease fibers WRV and ○SR-value, a notable advantage of PAE-pretreatment is milder required curing conditions of the PAE, which makes implementation of the method easier in practice. Due to decreased fiber-to-fiber bonding capability, the PAE-treated specialty fibers could take advantage especially as a bulking aid of paperboard, tissue, and absorbent materials.

The EU has set the ambitious target of raising the share of EU energy consumption produced from renewable resources to 32% by 2030, with a target of climate neutrality by 2050. The aim of this paper is to assess the role of biomass usage in the context of these targets. The paper identifies the progress made between 2013 and 2022 by focusing on a selection of EU countries. The largest bioenergy increments of 130, 77, and 60 PJ were reported for Poland, Sweden, and the Netherlands. This study evaluates the crucial role of co-generation and heat in EU regions, with biomass usage between 55 and 80% of the combined heat and power (CHP) energy in Nordic countries. The future perspectives for bioenergy based on EU policies, biomass resources, and technical issues were addressed. The EU possesses around 9% of the global biomass supply, ensuring a certain level of biomass resource dependence. Thus, the biomass usage demand in energy production, non-energy sectors, and transport is expected to rise, leading to increments of 13–76% on biomass imports. It appears that bioenergy development is mostly limited by economic issues and uneven support for bioenergy in different EU countries as well as environmental issues. The study shows a promising and sustainable potential of bioenergy in the EU as a renewable energy source while minimizing negative impacts on the environment and the economy. By 2050, liquid biofuels are likely to be increasingly used in the transport sector. Non-energy sector usage of biomass is still in an early stage of development, except for the pulp and paper industry, and significant use of biomass in non-energy sectors seems unlikely in the near future. [ABSTRACT FROM AUTHOR]

Carbon containing waste has a certain calorific value and utilization value due to the presence of carbon elements. However, the current treatment methods are mostly traditional landfill disposal, incineration, or expensive physical and chemical reaction methods, which clearly do not comply with the rules of the current clean and resource-saving society. In this paper, a new technology and system for carbon containing wastes is proposed, which comprehensively treats and recycles carbon containing wastes, including solid waste, wastewater, waste gas, etc., using pyrolysis–gasification two-stage-cycle technology. The calculation results indicate that the technical scheme proposed in this article is feasible and can achieve the recycling of intermediate and final products, the efficient and clean utilization of carbon containing waste, and the graded utilization of energy. The clean utilization rate of carbon containing waste can be effectively improved, the energy consumption and cost of separate treatments can be reduced, and zero waste emissions can be completely achieved by the comprehensive pyrolysis–gasification two-stage-cycle treatment and resource utilization technology, which is one of the preferred solutions for future resource-saving societies. [ABSTRACT FROM AUTHOR]

Grid-connected photovoltaic (PV) power systems are one of the most promising technologies to address growing energy demand and ecological challenges. This paper proposes smart switching to mitigate inrush currents during the connection of single-phase transformers used in PV systems. An effective inrush current mitigation contributes to the reliability of PV systems. The inrush current severity is influenced by the pseudorandom residual flux at the transformer core and the energization point-on-wave. The most common approach to avoid inrush currents is controlled connection, which requires prior knowledge of the residual flux. However, the residual flux can differ in each case, and its measurement or estimation can be impractical. The proposed smart switching is based on a comprehensive analysis of the residual flux and the de-energization trajectories, and only requires two pieces of data (ϕRM and ϕ0, flux values of the static and dynamic loops when the respective currents are null), calculated from two simple no-load tests. It has a clear advantage over common approaches: no need to estimate or measure the residual flux before each connection, avoiding the need for expensive equipment or complex setups. Smart switching can be easily implemented in practical settings, as it considers different circuit breakers with distinctive aperture features, making it cost-effective for PV systems. [ABSTRACT FROM AUTHOR]

This study explored the association between renewable energy uptake and digitalization in the sector by reviewing relevant literature (published 2010–2022), with the aim of identifying the existing utilization of digital technologies within the sector, challenges to adoption, and future prospects. Different search engines (SCOPUS, Web of Science, and Google Scholar) were used to locate relevant papers and documents. The results revealed the high significance of digital technologies in supporting the renewable energy sector, with high costs and security risks representing the key challenges. Most papers reviewed had a positive outlook, but recommended further research and development for effective energy transition and resilient infrastructure. The current drivers of the integration of digital technologies to support the diffusion of renewable energy sources appear to extend beyond energy demand and involve many aspects of sustainability and sustainable development. Compared with previous reviews, this work has unique scope and novelty since it considers the bigger picture of the coupling between digitalization and the renewable energy sector, with a greater focus on critical areas in these two interconnected bodies that need to be addressed. The relatively small sample of relevant papers (69 from 836 hits) located in the literature review confirms the need for more research covering the subject in greater depth. [ABSTRACT FROM AUTHOR]

Excellent mechanical and electrical properties of graphene-based paper-like materials are essential for applications in flexible conductors, energy-storage devices, etc. The graphene oxide (GO) supernatant separated by centrifugation and ultrasonication has been used to prepare graphene oxide paper and reduced graphene oxide paper (rGOP) with high strength and conductivity. However, this method has cumbersome steps and low supernatant concentration, which greatly increases time and energy consumption, and is not suitable for rapid batch preparation of high-strength and high-thickness rGOP. Herein, a high-speed mechanical shearing method has been used to efficiently exfoliate graphite oxide suspension into high-concentration GO slurry with large lateral size, and rGOP has been further prepared by blade coating and HI acid chemical reduction. Compared with the product prepared by ultrasonic exfoliation method, the average area of GO sheets obtained via the mechanical shear exfoliation method can reach around 16.31 μm2. As a result, the mechanical properties and conductivity of the prepared rGOP have been increased by 30% and 23.5%, respectively, with the tensile strength and electrical conductivity of 478.2 MPa and 208.4 S/cm being obtained. The developed method is of great significance for the large-scale production and emerging applications of lightweight and high-performance rGOP. [ABSTRACT FROM AUTHOR]

The effective scaling-up of redox flow batteries (RFBs) can be facilitated upon lowering the capital costs. The application of ubiquitous manganese along with hydrogen (known as H2−Mn regenerative fuel cells (RFC)) is seen as an effective solution for this purpose. Here, we aim to evaluate different positive electrodes so as to improve the key performance metrics of the H2/Mn RFC, namely electrolyte utilization, energy efficiency, and peak power densities. Commercially available carbon paper and graphite felt are used to show that the latter provides better key performance indicators (KPIs), which is consistent with the results reported for standard all-vanadium RFBs in the literature. Even better KPIs are obtained when an in-house carbon catalyst layer (CCL) is employed in combination with graphite felt electrodes (e.g., more than 80% energy efficiency, >0.5 W cm−2 peak power density and electrolyte utilization of 20 Ah L−1 for felt and carbon metal fabric (CMF), prepared by means of electrospinning and carbonization, in comparison with about 75% energy efficiency 0.45 W cm−2 peak power density and 11 Ah L−1 electrolyte utilization for felt on its own). It is envisaged that if the electrochemical performance of CCLs can be optimized then it could open up new opportunities for the commercial exploitation of H2−Mn systems. [ABSTRACT FROM AUTHOR]

Deploying renewable energy to unit design energy-efficient technologies may fulfill the additional demand of various energy-intensive industries for their sustainability and resiliency. Multiple Stage Evaporator (MSE) is one of the most energy-intensive units used to extract the water content of the weak liquor in various industries, including the paper industry. This energy intensiveness may be reduced by integrating various Energy Reduction Schemes (ERSs). Hence, this work proposes a ERSs integrated MSE model to analyze its energy efficiency. These ERSs includes Thermo-Vapor Compressor, Steam-, Feed- Split, Feed Preheater, and Flash Tanks. Further, the performance of the proposed model is investigated under two important real-time plant complexities: Boiling Point Elevation and Fouling to achieve more realistic results. The performance analysis is initiated with the formulation of a nonlinear constrained optimization problem to increase the steam economy (SE). Also, the simulation is extended to validate at two different product concentrations (52% and 65%) by employing state-of-art optimization algorithms: CONOPT, and SCA in GAMS and MATLAB respectively. The simulated results shows an increment 1.64% and 1.37% of SE for both 52% and 65% concentration of weak liquor respectively in case of CONOPT than SCA. Also, the waste heat of the condensate, feed, and product may be further utilized for the heat recovery by incorporating the flash tanks which leads to a countable energy saving. Eventually, integrating the solar fields: PTC and LFR ensures a notable reduction in conventional heat utilization by 85.96% and 92.85%, respectively and hence, enhance the energy efficiency. • Expounded energy modeling of ERSs based MSE with BPE and Fouling. • Implementation of NLP and metaheuristic approaches for performance optimization. • Reutilization of waste heat to maximize the energy efficiency. • Integration of solar fields (PTC and LFR) to reduce conventional fuel utilization. • Prospecting the challenges and direction of energy management optimization. [ABSTRACT FROM AUTHOR]

This document is a compilation of research papers that explore the topics of Smart Cities and Positive Energy Districts (PEDs). The papers cover a range of subjects including energy efficiency, renewable energy communities, smart urban management, and financial schemes for sustainable neighborhoods. The findings emphasize the importance of energy renovation, potential energy and financial savings, and the need for collaborative approaches and policy direction to achieve sustainable urban development. The papers also provide insights into innovative solutions and technological advancements that can contribute to the realization of carbon-neutral and sustainable cities. This document serves as a valuable resource for library patrons conducting research on energy efficiency and sustainable building practices. [Extracted from the article]

To reduce energy consumption, a new pulping process called A-D-E-RC (acidification/desalination/electrolysis/recycle-cooking) was developed by a research group in Guangxi University of China. The present work focuses on the step of recycle cooking (RC) to further investigate the technical feasibility of A-D-E-RC methods. Golden bamboo grass was considered as fiber source material for pulp, and it was cooked with the acidic treating of wastewater from black liquor. Then, the pulp obtained from each cooking was made into paper to test the changes in its physical properties. As a result, the pulp yield increased from 43.9% to 50.2%, after re-using acidified black liquor, and the paper's tear index and tensile index were improved. Therefore, this study demonstrated the feasibility of recycle cooking (RC) fiber materials for pulp applied the acidic treating wastewater from black liquor, and thereby, it further identifies the technical feasibility of A-D-E-RC pulping methods. [ABSTRACT FROM AUTHOR]

Proper management and effective conversion of biomass residues for biofuel production are crucial to reduce deforestation due to the cutting of trees for cooking and heating as a primary source of fuel and improving energy utilization of households. Thus, this study is aimed at investigating the effects of biomass residues of the coffee husk (CH), sawdust (SD), khat waste (KW), and dry grass (DG) and binding materials prepared from the waste paper pulp (PP) and clay soil (CS) under a low-pressure piston press densification machine. The biomass waste and binders were combined in a 3 : 1 ratio of CH: PP, CH: CS, SD : PP, SD : CS, KW: PP, KW: CS, DG: PP, and DG: CS. The briquettes were produced using a manually operated closed-end piston press machine compacted at an average pressure of 2 MPa. Briquette proximate and ultimate analysis of moisture content, volatile matter, fixed carbon, and ash content was determined using standard ASTM methods, while the calorific value was determined using a bomb calorimeter and data analysis was carried out using the R-program. Results revealed that the briquette produced from biomass residues has a mean value of fixed carbon and calorific value that ranged from 38:62 ± 1:53 to 41:75 ± 2:14 and 3979:21 ± 232:05 cal/g to 4577:34 ± 397:11 cal/g, respectively. Generally, briquettes produced from saw dust residue and the paper pulp binder had better quality of fuel and this could be used as an alternative source of energy and proper waste management option. [ABSTRACT FROM AUTHOR]

This paper aims to comprehensively explore the pivotal role of simulation and modeling in the field of Artificial Intelligence (AI). It focuses on elucidating the diverse applications of simulation and modeling in training AI systems, optimizing algorithms, and enhancing decision-making processes. To achieve this objective, we conducted an extensive review of the literature from the Scopus database, employing a well-defined selection process. We utilized keywords such as "simulation," "modeling," "Artificial Intelligence," and related terms to identify relevant papers published within the last 10 years. The selection criteria included assessing the relevance, quality, contribution, and recent citations of the papers. After a rigorous screening process, we selected 40 papers with the highest overall scores for inclusion in our review. The selected papers encompass a wide range of domains where simulation and modeling play a vital role in advancing AI applications. These domains include manufacturing, healthcare, energy consumption prediction, public sector decision-making, education, environmental modeling, and more. Our review highlights how AI leverages simulation and modeling to improve predictive accuracy, optimize resource allocation, and enhance decision-making processes across diverse sectors. We also discuss the potential future directions in the integration of simulation and modeling with AI, emphasizing its significance in various fields. [ABSTRACT FROM AUTHOR]

The research assessed waste-based briquettes consumption compared to conventional fuels in the Andes. Laboratory tests were conducted together with on-field analysis in Colquencha (Bolivia). The laboratory study shows that the performances of briquettes are better in terms of PM2.5 (933.4 ± 50.8 mg kg−1) and CO emissions (22.89 ± 2.40 g kg−1) compared to animal dung (6265.7 ± 1273.5 mgPM2.5 kg−1 and 48.10 ± 12.50 gCO kg−1), although the boiling time increased due to the lower fuel consumption rate and firepower compared to shrubs. The social survey organized with 150 Bolivian citizens suggested that low-income households are not able to pay for an alternative fuel: about 40% would pay less than 4 USD per month, while methane use for cooking is positively correlated with the income level (r = 0.244, p < 0.05). On field analysis suggested that local cookstoves are not appropriate for briquettes combustion since indoor air pollution overcomes 30 ppm of CO and 10 mgPM2.5 m-3. On balance, local small manufactures can be the main target for selling waste-based briquettes to reduce shrubs and wood consumption. However, briquettes production costs seem not yet competitive to natural easy-to-obtain fuels (i.e., animal dung). The research encourages the use of cellulosic and biomass waste-based briquettes in the Andean area for cooking, heating, or manufacturing and strongly advises policy-makers to introduce economic incentives for the recovery of secondary raw materials. • Analysis of waste-based briquettes use in Andean areas were conducted. • Laboratory analysis, social surveys, and on field evaluations are the methods. • Briquettes can be employed for reducing about 30% of the conventional fuels. • The research encourages the employment of waste-based briquettes in the Andes. • Incentives to briquettes production and consumption should be introduced. [ABSTRACT FROM AUTHOR]

The European Commission has mandated the use of digital building logbooks (DBL) to encourage deep energy renovations and overcome barriers in building renovations. The current energy performance certificates (EPCs) focus on operational energy consumption, whereas the DBL will cover the entire life cycle of buildings and provide a more comprehensive evaluation of buildings, through providing a passport rating in three domains: energy performance, sustainability, and smartness. This paper defines the digital building logbook (DBL) data structure within the context of the EUB SuperHub, a three-year project financed by the European Union under the Horizon 2020 program. The creation of the EUB SuperHub DBL data structure involved an extensive review of relevant literature, including existing DBL data structures developed in previous EU projects (iBRoad, ALDREN, BIM4EEB, X-tendo), recommendations from the "Study on the Development of an EU Framework for Buildings' Digital Logbook", requirements specified in the grant agreement, existing EU legislation, and anticipated future legislation. The proposed digital building logbook data structure for the EUB SuperHub project comprises eight primary categories and is designed to provide all the essential input data needed throughout the building's life cycle to compute the passport rating across three domains: energy efficiency, sustainability, and smartness. With the requirements stipulated in existing and soon-to-be-adopted EU legislation, the introduction of a digital building logbook has become a necessity. Though the undertaking is a formidable task and will require considerable effort, its benefits are numerous and promising, including the potential to enhance energy renovation rates. [ABSTRACT FROM AUTHOR]

The nature of construction and formulation of the multi-objective functions in the flexible job shop (FJS) provides great insights about the study of the technique and the mechanism in scheduling helping to prioritize efforts for optimizing the manufacturing execution performance, which draw the focus of the researchers at home and abroad. From the perspective of the model, the solution method and the objective function, this paper reviews and analyzes the related academic papers and conferences articles during past few years. As a result, the construction forms of the multi-objective function and the scheduling scenarios show strongly positive correlation with the Makespan, the delivery tardiness, the energy consumption or the cost. Consequently, facing with the characteristic in a general way, the detailed construction analysis on the function for the flexible job shop scheduling problem (FJSP) is critical reviewed, and a total 6 types with 49 kinds classification are discussed. Obviously, the main goals are to summarize, analyze, discuss, and synthesize the existing achievements, the current research status, and the ongoing studies on the FJSP functions construction, and additionally to give useful insight into future research. Combined with the development trend of the intelligent manufacturing and the operations research, arguing for the formulation of the multi-obj. function, this review is expected to contribute to the future research of FJSP. [ABSTRACT FROM AUTHOR]

Background: To reduce the effects of climate change, the current fossil-based energy system must transition to a low-carbon system based largely on renewables. In both academic literature and non-academic discourse concerning the energy transition, resilience is frequently mentioned as an additional objective or requirement. Despite its frequent use, resilience is a very malleable term with different meanings in different contexts. Main text: This paper seeks to identify how resilience is understood in the field of the energy system and whether there are similar aspects in the different ways the term is understood. To this end, we review more than 130 papers for definitions of energy system resilience. In addition, we use different aspects to categorize and examine these. The results paint a diverse picture in terms of the definition and understanding of resilience in the energy system. However, a few definition archetypes can be identified. The first uses a straightforward approach, in which the energy system has one clearly defined equilibrium state. Here, resilience is defined in relation to the response of the energy system to a disturbance and its ability to quickly return to its equilibrium. The second type of resilience allows for different equilibriums, to which a resilient energy system can move after a disruption. Another type of resilience focuses more on the process and the actions of the system in response to disruption. Here, resilience is defined as the ability of the system to adapt and change. In the papers reviewed, we find that the operational definition of resilience often encompasses aspects of different archetypes. This diversity shows that resilience is a versatile concept with different elements. Conclusions: With this paper, we aim to provide insight into how the understanding of resilience for the energy system differs depending on which aspect of the energy system is studied, and which elements might be necessary for different understandings of resilience. We conclude by providing information and recommendations on the potential usage of the term energy system resilience based on our lessons learned. [ABSTRACT FROM AUTHOR]

Power grids in the 21st century face unprecedented challenges, including the urgent need to combat pollution, mitigate climate change, manage dwindling fossil fuel reserves, integrate renewable energy sources, and meet greater energy demand due to higher living standards. These challenges create heightened uncertainty, driven by the intermittent nature of renewables and surges in energy consumption, necessitating adaptable demand response (DR) strategies. This study addresses this urgent situation based on a statistical analysis of recent scientific research papers. It evaluates the current trends and DR practices in buildings, recognizing their pivotal role in achieving energy supply–demand equilibrium. The study analysis provides insight into building types, sample sizes, DR modeling approaches, and management strategies. The paper reveals specific research gaps, particularly the need for more detailed investigations encompassing building types and leveraging larger datasets. It underscores the potential benefits of adopting a multifaceted approach by combining multiple DR management strategies to optimize demand-side management. The findings presented in this paper can provide information to and guide future studies, policymaking, and decision-making processes to assess the practical potential of demand response in buildings and ultimately contribute to more resilient and sustainable energy systems. [ABSTRACT FROM AUTHOR]

The University of Alcalá in Madrid will organize the "III International Congress on Green Public Procurement and Climate Change" on October 4th and 5th, 2023. The congress aims to receive oral communications on topics related to green public procurement and climate change, as well as tangential aspects such as sustainable food, legislation on climate change, public procurement and depopulation, sustainable infrastructure and energy efficiency, and sustainable or low-emission mobility. The Scientific Committee will review the communications and select the best ones for possible publication in the journal Actualidad Jurídica Ambiental. The deadline for submitting abstracts is May 15th, 2023. [Extracted from the article]

Eco-driving is a style of driving that minimizes energy consumption, while gamification refers to the use of game techniques to motivate user engagement in non-game contexts. This paper comprises a literature review assessing applying gamification to encourage eco-driving. The Web of Science Core Collection and EBSCO Host platforms were searched in February 2022. Qualifying sources included peer review journal articles, conference proceedings papers, academic book chapters and dissertation reports. The final sample comprised 39 unique publications, of which 34 described gamification adjunct systems used during driving. Most were designed as smartphone apps, but some ran on bespoke in-car feedback displays. Alternatively, using game-based learning, 5 studies described videogames designed to encourage eco-driving. Popular gamification elements were: an eco-driving score; self-comparisons or comparisons with others via leader boards; rewards; challenges, missions or levels; and emotive feedback (e.g., emojis). One system aimed to discourage driving at busy times. While 13 studies assessed the efficacy of the various systems, these were generally of poor quality. This developing literature contains many good ideas for applying gamification to promote eco-driving. However, evidence for efficacy is largely absent and researchers are encouraged to continue to evaluate a wide range of gamification approaches to promote eco-driving. [ABSTRACT FROM AUTHOR]

This paper presents a shock detection device for packages in the supply chain. The primary purpose is to identify package damage during storage, delivery, and handling. Additionally, products are likely to be damaged if dropped from a certain height, which sometimes does not appear on the package. By continuously measuring package vibrations and detecting shocks in the supply chain, consumers can gain an insight into the state of the product upon delivery. This paper presents the Smart Sticker implementation for ultra-low-power shock detection in the supply chain. The overall energy consumption must be kept as low as possible while continuously sensing the presence of shock to ensure that the Smart Sticker's battery lasts as long as possible. The Smart Sticker functions in three modes to meet the established constraints: low-power, active, and data transfer mode. While detecting the shock, the low-power mode uses the least amount of energy needed. If the shock exceeds the threshold, the Smart Sticker enters active mode, stores the detected g force value in memory, and then switches back to low-power mode. Finally, employing Near Field Communication (NFC) and energy harvesting, the data transfer mode allows the consumer to read the recorded data. The results show that the Smart Sticker for shock detection performs according to set requirements and successfully monitors and detects shock for packages in the supply chain. [ABSTRACT FROM AUTHOR]

In recent decades, artificial intelligence has undergone transformative advancements, reshaping diverse sectors such as healthcare, transport, agriculture, energy, and the media. Despite the enthusiasm surrounding AI's potential, concerns persist about its potential negative impacts, including substantial energy consumption and ethical challenges. This paper critically reviews the evolving landscape of AI sustainability, addressing economic, social, and environmental dimensions. The literature is systematically categorized into "Sustainability of AI" and "AI for Sustainability", revealing a balanced perspective between the two. The study also identifies a notable trend towards holistic approaches, with a surge in publications and empirical studies since 2019, signaling the field's maturity. Future research directions emphasize delving into the relatively under-explored economic dimension, aligning with the United Nations' Sustainable Development Goals (SDGs), and addressing stakeholders' influence. [ABSTRACT FROM AUTHOR]