Search

Bio-adhesives used clinically, commonly have the ability to fill surgical voids and support wound healing, but which are devoid of antibacterial activity, and thus, could not meet the particular needs of the infected wound site. Herein, a series of natural polyphenolic antibacterial bio-adhesives were prepared via simple mixing and heating of polyphenols and acid anhydrides without any solvent or catalyst. Upon the acid anhydride ring opening and acylation reactions, various natural polyphenolic bio-adhesives could adhere to various substrates ( i.e. , tissue, wood, glass, rubber, paper, plastic, and metal) based on multi-interactions. Moreover, these bio-adhesives showed excellent antibacterial and anti-infection activity, rapid hemostatic performance and appropriate biodegradability, which could be widely used in promoting bacterial infection wound healing and hot burn infection wound repair. This work could provide a new strategy for strong adhesives using naturally occurring molecules, and provide a method for the preparation of novel multifunctional wound dressings for infected wound healing.

Semicarbazide (SEM) is a metabolite of antibiotic nitrofurazone and a food contaminant in food production, showing potential carcinogenic, mutagenic, teratogenic, and toxic effects on human health. It is urgent to develop a highly efficient and sensitive assay for visual detection of SEM. In this paper, a pyrrolopyrrole cyanine fluorescent probe (PPCy-1) was reported for visualization and quantitative analysis of SEM through a chromophore reaction sensing mechanism for the first time. The probe towards SEM exhibited a fast response (10 min), a low detection limit (0.18 μM), high selectivity, and distinct dual ratiometric fluorescence turn-on and colorimetric modes. Its practicability was further verified by detecting SEM in meat, water, and honey samples with satisfactory recovery values. More importantly, a smartphone-assisted portable testing platform was constructed based on a PPCy-1-immobilized test paper or a polyamide thin film with a color scanning APP for real-time and on-site detection of SEM. This work provides low-cost, convenient, and rapid assays for visual SEM detection, which have potential applications in food safety monitoring.

Antibiotic resistance is a growing problem that requires alternative antibacterial agents. MoS 2 , a two-dimensional transition metal sulfide, has gained significant attention in recent years due to its exceptional photocatalytic performance, excellent infrared photothermal effect, and impressive antibacterial properties. This review presents a detailed analysis of the antibacterial strategies and mechanism of MoS 2 , starting with its morphology and synthesis methods and focusing on the different interaction stages between MoS 2 and bacteria. The paper summarizes the main antibacterial mechanisms of MoS 2 , such as photocatalytic antibacterial, enzyme-like catalytic antibacterial, physical antibacterial, and photothermal-assisted antibacterial. It offers a comprehensive discussion focus on recent research studies of photocatalytic antibacterial mechanisms and categorizes them, guiding the application of MoS 2 in the antibacterial field. Overall, the review provides an in-depth understanding of the antibacterial mechanisms of MoS 2 and presents the challenges and future directions for the improvement of MoS 2 in the field of high-efficiency antibacterial materials.

Nature creates definite architecture with fluorescence capabilities and superior visual adaptation in many organisms, e.g. , cephalopods, which differentiates them from their surroundings in the context of colour and texture that allows them to use this in defence, communication, and reproduction. Inspired by nature, we have designed a coordination polymer gel (CPG)-based luminescent soft material where the photophysical properties of the material can be tuned using a low molecular weight gelator (LMWG) with chromophoric functionalities. Herein, a water-stable coordination polymer gel-based luminescent sensor was created using zirconium oxychloride octahydrate as a metal source and H 3 TATAB (4,4',4''-((1,3,5-triazine-2,4,6-triyl)tris(azanediyl))tribenzoic acid) as a LMWG. The tripodal carboxylic acid gelator H 3 TATAB with a triazine backbone induces rigidity in the coordination polymer gel network structure along with the unique photoluminescent properties. The xerogel material can selectively detect Fe 3+ and nitrofuran-based antibiotics ( i.e. , NFT) in aqueous medium through luminescent 'turn-off' phenomena. This material is a potent sensor because of the ultrafast detection of the targeted analytes (Fe 3+ and NFT), with consistent efficacy in quenching activity up to five consecutive cycles. More interestingly, colorimetric, portable handy paper strip, thin film-based smart detection approaches (under an ultraviolet (UV) source) were introduced to make this material a viable sensor probe in real-time applications. In addition, we developed a facile method to synthesize CPG-polymer composite material that can be utilized as a transparent thin film to protect against UV radiation (200-360 nm), with approximately 99% absorption efficacy.

We conducted a critical review to establish what is known about the sources, characteristics, and dissemination of ARGs in the atmosphere. We identified 52 papers that reported direct measurements of bacterial ARGs in air samples and met other inclusion criteria. The settings of the studies fell into the following categories: urban, rural, hospital, industrial, wastewater treatment plants (WWTPs), composting and landfill sites, and indoor environments. Certain genes were commonly studied and generally abundant: sul1 , intI1 , β-lactam ARGs, and tetracycline ARGs. Abundances of total ARGs varied by season and setting, with air in urban areas having higher ARG abundance than rural areas during the summer and vice versa during the winter. There was greater consistency in the types and abundances of ARGs throughout the seasons in urban areas. Human activity within indoor environments was also linked to increased ARG content (abundance, diversity, and concentration) in the air. Several studies found that human exposure to ARGs through inhalation was comparable to exposure through drinking water or ingesting soil. Detection of ARGs in air is a developing field, and differences in sampling and analysis methods reflect the many possible approaches to studying ARGs in air and make direct comparisons between studies difficult. Methodologies need to be standardized to facilitate identification of the dominant ARGs in the air, determine their major sources, and quantify the role of atmospheric transport in dissemination of ARGs in the environment. With such knowledge we can develop better policies and guidelines to limit the spread of antimicrobial resistance.

Antimicrobial susceptibility testing (AST) is a key measure in clinical microbiology laboratories to enable appropriate antimicrobial administration. During an AST, the determination of the minimum inhibitory concentration (MIC) is an important step in which the bacterial responses to an antibiotic at a series of concentrations obtained in separate bacterial growth chambers or sites are compared. However, the preparation of different antibiotic concentrations is time-consuming and labor-intensive. In this paper, we present a microfluidic device that generates a concentration gradient for antibiotics that is produced by diffusion in the laminar flow regime along a series of lateral microwells to encapsulate bacteria for antibiotic treatment. All the AST preparation steps (including bacterium loading, antibiotic concentration generation, buffer washing, and isolated bacterial growth with an antibiotic) can be performed in a single chip. The viable bacterial cells in each microwell after the antibiotic treatment are then quantified by their surface-enhanced Raman scattering (SERS) signals that are acquired after placing a uniform SERS-active substrate in contact with all the microwells. For proof-of-concept, we demonstrated the AST performance of this system on ampicillin (AMP)-susceptible and -resistant E. coli strains. Compared with the parameters for conventional AST methods, the AST procedure based on this chip requires only 20 μL of bacteria solution and 5 h of operation time. This result indicates that this integrated system can greatly shorten and simplify the tedious and labor-intensive procedures required for current standard AST methods.

Five new complexes of the palladium(II) ion (C1-C5) having the general formula [(PdL 2 )]Cl 2 with some 2-aminothiazoles (L1-L5), where L1 = 2-amino-4-(3,4-difluorophenyl)thiazole, L2 = 2-amino-5-methyl-4-phenylthiazole, L3 = 2-amino-4-phenylthiazole, L4 = 2-amino-4-(4-chlorophenyl)thiazole, and L5 = 2-amino-4-(2,4-difluorophenyl)thiazole, have been synthesized and characterized by elemental microanalysis and infrared, 1 H NMR and 13 C NMR spectroscopy. The in vitro antimicrobial activity of the five ligands and the corresponding Pd(II) complexes is investigated. Testing is performed by the microdilution method and the minimum inhibitory concentration (MIC) and minimum microbicidal concentration (MMC) have been determined. Testing is conducted against 11 microorganisms (nine strains of pathogenic bacteria and two yeast species). The tested ligands and palladium(II) complexes show selective, high and moderate activity. There is a difference in antimicrobial activity between the ligands and the corresponding palladium(II) complexes. The complexes have significant anti-staphylococcal activity and activity on Pseudomonas aeruginosa which is better than the positive control. The interactions of newly synthesized palladium(II) complexes with calf thymus DNA (CT-DNA) were investigated using UV-Vis absorption and fluorescence spectroscopy. Analysis of UV-absorption and fluorescence spectra indicates the formation of a complex between the palladium(II) complexes and DNA. The high values of intrinsic binding constants, K b , of the order 10 4 M -1 and Stern-Volmer quenching constants, K SV indicated very good binding of all complexes to CT-DNA. Also, the new Pd(II) complexes show high cytotoxic activity towards the human prostate cancer cell line and insignificant activity towards non-cancerous human fibroblasts. Future research could additionally explore the biological activity of Pd(II) complexes presented in this paper and investigate the possibility of their implementation in clinical practice.5 M -1 indicated very good binding of all complexes to CT-DNA. Also, the new Pd(II) complexes show high cytotoxic activity towards the human prostate cancer cell line and insignificant activity towards non-cancerous human fibroblasts. Future research could additionally explore the biological activity of Pd(II) complexes presented in this paper and investigate the possibility of their implementation in clinical practice.

In this paper, Cu(II), Mn(II) and Zn(II) complexes with N , N , N -trimethyl-2-oxo-2-(2-(1-(thiazol-2-yl)ethylidene)hydrazinyl)ethan-1-aminium chloride (HL1Cl) were synthesized and characterized by single-crystal X-ray diffraction, IR spectroscopy, elemental analysis and DFT calculations. In all three complexes, a ligand (L1) is coordinated in a deprotonated formally neutral zwitterionic form via NNO donor set atoms. Cu(II) and Zn(II) form mononuclear penta-coordinated complexes [CuL1(N 3 )(CH 3 OH)]BF 4 and [ZnL1(N 3 ) 2 ], respectively, while Mn(II) forms a binuclear [Mn 2 L1 2 (μ- 1,1 -N 3 ) 2 (N 3 ) 2 ]·2CH 3 OH complex, with unusual distorted trigonal-prismatic geometry around the metal centers. The antimicrobial activity of these complexes was tested against a panel of Gram-negative and Gram-positive bacteria, two yeasts and one fungal strain. The binuclear Mn(II) complex showed antifungal activity of similar intensity to amphotericin B. Based on the results of the brine shrimp test and DPPH radical scavenging activity, the most active Cu(II) and Mn(II) complexes were selected for evaluation of cytotoxic activity against five malignant cancer cell lines (HeLa, A375, MCF7, PC-3 and A549) and one normal cell line HaCaT. Both complexes showed significant activity. It should be pointed out that the activity of the Mn(II) complex against the MCF7 breast cancer cell line is only slightly weaker than that of cisplatin, but with selectivity to the tumor cell line in comparison to normal HaCaT cells, which is non-existent in the case of cisplatin.

This paper reports antimicrobial metallopolymers containing biodegradable polycaprolactone as the backbone with boronic acid and cobaltocenium as the side chain. While boronic acid promotes interactions with bacterial cells via boronolectin with lipopolysaccharides, cationic cobaltocenium facilitates the unique complexation with anionic β-lactam antibiotics. The synergistic interactions in these metallopolymer-antibiotic bioconjugates were evidenced by re-sensitized efficacy of penicillin-G against four different Gram-negative bacteria ( E. coli , P. vulgaris , P. aeruginosa and K. pneumoniae ). The degradability of the polyester backbone was validated through tests under physiological pH (7.4) and acidic pH (5.5) or under enzymatic conditions. These metallopolymers exhibited time-dependent uptake and reduction of cobalt metals in different organs of mice via in vivo absorption, distribution, metabolism, and excretion (ADME) tests.

Antimicrobial materials are expected to be alternatives for antibiotics against multidrug-resistant bacteria. In this paper, non-spherical α-Fe 2 O 3 @Au/PDA core/shell nanoparticles with tunable shapes are synthesized by a one-step in situ oxidation-redox polymerization method toward near infrared light-responsive antibacterial therapy. The thickness and composition of the Au/PDA hybrid shell can be controlled by varying the concentration of HAuCl 4 and the dopamine precursor. Owing to the wonderful photothermal characteristics originating from the Au/PDA shell, the spindle α-Fe 2 O 3 @Au/PDA core shell nanoparticles exhibit excellent photothermal sterilization effects against both Escherichia coli and Staphylococcus aureus at low concentrations. Meanwhile, the NIR photothermal induced bactericidal performance indicates that α-Fe 2 O 3 @Au/PDA hybrid particles with tunable non-spherical shapes possess unique controllable antibacterial effects. As a result, this finding provides a simple strategy for fabricating high performance photothermal antibacterial agents and the final products possess high potential in synergistic antimicrobial therapy.

Tannic acid (TA), a large polyphenolic molecule, has long been known for use in food additives, antioxidants, bio-sorbents, animal feed and adhesives due to its intrinsic properties such as antioxidation, metal chelation, and polymerization. Recently, there has been a renewed interest in fabricating engineered advanced materials with TA modification for novel bio-applications. The modification process involves various interactions/reactions based on its diverse chemical structure, contributed by abundant aromatic rings and hydroxyl groups. In addition, the obtained composites are endowed with retained TA activity and novel enhanced properties. Therefore, the aim of this review is to highlight the recent biomedical application of TA-based metal phenolic networks (TA-MPNs) by focusing on their intrinsic properties and the endowed ability for novel engineered functional composites. The potential contributions of TA-MPNs in "Tumor Theranostics", "Anti-Bacterial Ability", "Wound Repair for Skin Regeneration" and "Bone Tissue Regeneration Applications" are summarized in this paper.

Photodynamic antibacterial therapy employs nanocomposites as an alternative to traditional antibiotics for the treatment of bacterial infections. However, many of these antibacterial materials are less effective towards bacteria than traditional drugs, either due to poor specificity or antibacterial activity. This can result in needless and excessive drug use in treatments. This paper describes a multifunctional drug delivery nanoparticle (MDD-NP), Sph-Ru-MMT@PZ, based on the nanostructured-form of [Ru(bpy)2dppz] (PF6)2 (Sph-Ru), which has adhesive properties towards its microbial targets as well as surface-anchoring photosensitizer effects. The design and construction of MDD-NP is based on the adhesive properties of the outer layers of montmorillonite (MMT), which allows Sph-Ru-MMT@PZ to successfully reach its bacterial target; the outer layer of the E. coli. In addition, under 670 nm red irradiation therapy (R-IT), the surface-anchoring properties use the photosensitizer phthalocyanine zinc (PZ) to destroy the bacteria by producing reactive oxygen species (ROS) which causes cell lysis of E. coli. More importantly, Sph-Ru-MMT@PZ has no fluorescence response to live E. coli with intact cell membranes but selectively stained and demonstrated fluorescence during membrane damage of early-stage cells as well as exposure of nuclear materials at late-stage of cell lysis. Sph-Ru-MMT@PZ showed beneficial and synergistic anti-infective effects in vivo by inhibiting the E. coli infection-induced inflammatory response and eventually promoting wound healing in mice. This new strategy for high precision antibacterial therapy towards specific targets, provides an exciting opportunity for the application of multifunctional nanocomposites towards microbial infections.