Search

Energy efficient buildings, propulsion components and thermal protection systems require materials with high thermal protective properties. Traditional polymer composites or ceramic materials have limited comprehensive applications because of their poor thermal protective properties or poor processability. Herein, a novel fire resistant and thermally insulating polymer/ceramic hybrid ceramifiable composite was developed based on low temperature sintering principle and foaming on fire strategy. Specifically, the influences of raw materials of low temperature ceramics, such as glass frit, phosphate, etc, on the properties of ceramifiable ethylene-vinyl acetate (EVA) composites were investigated. Its fire resistance and thermal insulation properties were evaluated by simulating different sintering environments. The results show that the ceramifiable composite exhibits the highest improvement in fire resistance because a crystalline phase was formed at high temperatures. Gas evolution from the thermal decomposition of ammonium polyphosphate (APP) and EVA contributes to the formation of the porous structure in ceramic residues. The optimal system can resist above 1000 °C flame for 30 min without disintegration, and the temperature of the unfired side was maintained around 200 °C. The reliability of the strategy was verified by the effective medium theory model. [Display omitted] [ABSTRACT FROM AUTHOR]

Thermal protection has always been an important issue in the energy, environment and aerospace fields. Porous ceramics produced by the particle-stabilized foaming method have become a competitive material for thermal protection because of their low density and low thermal conductivity. However, the study of porous ceramics for composite systems using particle-stabilized foaming method was relatively rare. Here, silica-alumina composite porous ceramics were prepared by particle-stabilized foaming method, which was achieved by tailoring the surface charges of silica and alumina through adjustment of the pH. Porous ceramics exhibited porosity as high as 97.49% and thermal conductivity (25 °C) as low as 0.063 W m−1 K−1. The compressive strength of porous ceramics sintered at 1500 °C with a solid content of 30 wt% could reach 0.765 MPa. Based on the light weight and excellent thermal insulation properties, the composite porous ceramic could be used as a potential thermal insulation material in the spacecraft industry. [ABSTRACT FROM AUTHOR]

[Display omitted] • Macro PPBESK beads with hierarchical pores are fabricated via NIPS approach. • PPBESK beads have a good thermal insulation property in a wide temperature window. • The compression modulus of PPBESK beads is more than 50 times higher than PS foam. • The performance can be controlled by the composition of the coagulation bath. Preparation of porous materials from high-performance polymers holds great promise for various advanced engineering applications like thermal insulation. However, it is still a great challenge to fabricate them due to the difficulties in manufacturing them. Herein, a high performance polymer material poly(aryl ether sulfone ketone)s containing phthalazinone and biphenyl moieties (PPBESK) was utilized to fabricate porous materials via a frequently used and simple method named non-solvent induced phase separation (NIPS). Macro porous PPBESK beads have been fabricated in different non-solvent coagulation baths. The kinetics of the phase inversion processes are visualized by the optical microscope. The multi-scale porous structures formed inside the beads endow them an excellent thermal insulation performance in a wide temperature window and a high mechanical performance that the compression modulus is more than 50 times higher than Polystyrene (PS) foam. Therefore, these PPBESK beads provide an optimized combination of functionalities including high mechanical strength and good thermal insulation, which could turn out to be useful in harsh environmental applications. [ABSTRACT FROM AUTHOR]

The incorporation of phase change microcapsule (microPCMs) substantially augmented the temperature regulation capacity of foams, endowing it with outstanding application potential in numerous industrial domains. However, interfacial compatibility issues between the capsule and the substrate always exist and affect foam performance. In this study, a milli-meter macrocapsule (macroPCMs) containing microPCMs was prepared using calcium alginate gel as the second layer wall to physically improve the interfacial compatibility. And poly (N-hydroxymethyl acrylamide) was in situ polymerized in the gel layer and provided active alcohol hydroxyl groups to form chemical grafting with the polyurethane raw materials, which further chemically improved the interfacial compatibility. These measures created a significantly improved foam microstructure and a greatly increased foaming capacity, which thus endow the composite foam with excellent thermal insulation performance and mechanical strength. Compared with conventional microPCMs-based foam, the foaming capacity of the macroPCMs-based foam increased by 40 folds, the temperature regulation duration increased by 7 folds, and the mechanical performance increased by 3 folds. Moreover, the insulated incubator fabricated with the macroPCMs-based foam exhibited two-fold greater thermal insulation efficiency than conventional models containing internal ice incubator, which validated the potential of employing macroPCMs-based polyurethane foam in cold chain logistics applications. [Display omitted] • Double-layered macrocapsules with reactive groups on the shell material was synthesized. • The double-layered microcapsules physically and chemically improved the capsules/foams interfacial compatibility. • The improved interfacial compatibility greatly enhanced the macroscopic performances of the composite foams. [ABSTRACT FROM AUTHOR]

Ultra-lightweight foam concrete (ULFC) is a relatively new construction material that has gained attention recently due to its unique properties. This material is not very heavy and low-density, making it easy to form into different shapes and sizes. Its excellent thermal insulation makes it popular for building walls, roofs, and floors. This review paper provides an in-depth examination of the properties and characteristics of ULFC. Its composition typically consists of cement, water, foam, additives, and the various manufacturing methods used to produce it—the mechanical properties of ULFC, including its compressive strength. The density of ULFC can vary greatly, usually falling between 100 and 600 kg/m3. The diversity of this can be affected by different factors, such as the kind and number of additives applied and the methods of foaming and thickening employed. The paper highlights the various applications of ULFC in the construction industry. Its use is as a TC material, which can help reduce heating and cooling costs; as a structural material, it can help reduce dead loads of structures. The review paper also discusses the challenges associated with ULFC production, including foam stability. Foam insulation concrete emits 302–508 kg CO 2 per cubic meter, primarily due to Portland cement, but enhances building energy efficiency, reducing household CO 2 emissions, while advanced recycled insulation materials offer superior thermal and acoustic properties with lower environmental impact. Additionally, we examine the current research on ULFC and suggest potential avenues for future investigation. This paper aims to introduce and put forward a range of cutting-edge and original recommendations and informative guidelines, with the ultimate objective of directing and shaping future research endeavors that focus on effectively exploiting and utilizing ultra-light foamed concrete. • Utilisation of Ultra-light foamed concrete for sustainable construction. • Mechanical properties and thermal insulation perspective incorporating Ultra-light foamed concrete. • The density of ULFC materials compared with normal concrete. • Microstructures properties of concrete incorporated with ULFC. • Recommendations and observations are advanced for future research in ULFC. [ABSTRACT FROM AUTHOR]

To meet demand for lightweight and high-strength ceramic foams, in-situ self-reinforced Si 3 N 4 ceramic foams, with compressive strength of 13.2–45.9 MPa, were fabricated by protein foaming method combined with sintered reaction-bonded method. For comparison, ordinary protein foamed ceramics with irregular block microstructure were fabricated via reaction-bonded method, which had compressive strength of 3.6–20.5 MPa. Physical properties of these two types of samples were systematically compared. When open porosity was about 80%, both types of Si 3 N 4 ceramic foams had excellent thermal insulation properties (<0.15 W m−1 K−1), while compressive strength of in-situ self-reinforced samples increased by more than 158% compared with ordinary samples. Under high-temperature oxidation conditions, microstructures of both types of samples were deformed with increase in oxidation temperature. Moreover, after oxidation temperature was increased to 1400 °C, oxidation weight gain decreased from 18.07% for ordinary samples to only 2.18% for self-reinforced samples. Thus, high-temperature oxidation resistance of Si 3 N 4 ceramic foams was greatly improved. [ABSTRACT FROM AUTHOR]

• Rigid polyurethane foam as the preferred thermal insulation. • Analysis of the influence of fly ash on material thermal conductivity. • Calculation of the heat balance for a wall with polyurethane insulation. • Study of the temperature field in the cross-section of the wall. Limitations in natural resource availability have a significant impact on prices of thermal energy. As a result, a growth of interest in the technology of insulation materials is observed. The paper presents a comparative analysis of rigid polyurethane foams, which are widely used as insulation materials. Rigid polyurethane foam with 10 wt.% addition of coal fly ash is compared to a reference foam, without any addition. The thermal conductivity coefficient of polyurethane materials was determined by the Hot Disk device. Heat transfer for both types of foams was modelled. As a result of the numerical modelling, the temperature field for the wall was obtained. The results of the computations have shown differences in energy losses. Conducted analyses demonstrate that the modified polyurethane foam (with the addition of coal fly ash) performs better as an insulation material. The reduction of heat requirement is 2.9 %. An environmental analysis of the insulation materials was also carried out. Using the SUBRAW index method it was calculated that embodied energy and the carbon footprint are lower in the case of the modified polyurethane compared to the unmodified foam. [ABSTRACT FROM AUTHOR]

In the field of material science, foaming agents common are commonly used for enhancing the thermal insulation and phase change materials (PCM) for heat storage. However, PCM tends to agglomerate in the cement slurry with the directly addition, presenting an obstacle to effective dispersion. Moreover, the addition of PCM leads to rapid defoaming. To overcome this issue, a novel nanoparticle-stabilized foam was designed in this study to create a three-component system that enhances the interaction of viscosity modifiers, surfactants, and foam stabilizers. The effect of cement density on thermal insulation was evaluated by analyzing thermal conductivity and heat transfer performance tests, as well as exploring the mechanical properties of the cement-based materials. Scanning electron microscope (SEM) images show that the foam designed in this study remarkably promotes the dispersion of PCM microcapsules, indicating the bridging interactions of foam in the cement paste. The result shows that the thermal conductivity of foam cement with 15 vol% PCM microcapsules drops from 0.11 W/m·k to 0.07 W/m·k compared to that without PCM addition, with a dry density around 600 kg / m 3. Furthermore, the specimens with the addition of PCM achieve the endothermic and exothermic peaks under experimental images. This discovery is of great significance to heat absorption ability of low-density concrete, where the addition of PCM leads to a slower foam bursting under the nanoparticle-reinforced foam system. The dispersion and connectivity of foams, as well as the physical characteristics of PCM, provide new perspectives for coexistence in a relatively stable system in this way. • Nanoparticle-stabilized foam remains stable within the cement slurry. • Stable foam contributes to the low thermal conductivity and superior insulation performance of foam cement. • The sustainable and environmentally friendly energy-saving effects of phase change materials microcapsules in foam cement. • A novel lightweight and eco-friendly cement with thermal regulation capabilities. [ABSTRACT FROM AUTHOR]

• Properties of alkali-excited fly ash aerogel foam concrete were studied. • The microstructure of alkali-excited fly ash aerogel foamed concrete was analyzed. • Test variable included aerogel particles, fly ash, foam and polypropylene fiber. • Developed concrete exhibited excellent thermal performance and mechanical strength. • Aerogel used in concrete had excellent thermal insulation performance. With increasing focus on low-carbon energy conservation and environmental protection, there is a need to consider all aspects of life in future developments. To meet the concept and requirements of energy conservation and environmental protection in the building industry, we have developed alkali-excited aerogel-foamed concrete that exhibits excellent thermal insulation performance and mechanical strength. The variables involved in its production include fly ash, foam, aerogels, and polypropylene fibres. In this study, the microstructure and mechanical and thermal properties of alkali-excited fly ash aerogel foam concrete was analysed. The results indicated that fly ash can replace a portion of the cement, resulting in a reduction in the thermal conductivity of the concrete. The addition of aerogels and foams to the concrete can significantly decrease its thermal conductivity. Specifically, when the aerogel content reaches 12 % and the foam content reaches 75 %, the thermal conductivity of the concrete decreases from 0.498 W/m·K to 0.183 W/m·K and 0.19 W/m·K, respectively. However, this decrease in thermal conductivity comes at a cost of approximately 50 % reduction in the flexural and compressive strengths of the concrete. The findings reveal that the aerogel has excellent thermal insulation performance similar to that of the foam, but it has little influence on the mechanical properties of the concrete. Additionally, an increase in the polypropylene fibre content significantly improves the mechanical properties of alkali-excited fly ash aerogel concrete, but the thermal properties of the concrete remain mostly unaffected. [ABSTRACT FROM AUTHOR]

To promote environmentally sustainable behavior, it is meaningful to develop a simple preparation method of polyurethane foam (PUF) with excellent performance and degradability. Herein, PUF composites were economically and conveniently synthesized by mixed foaming of polyurethane prepolymer and cellulose nanocrystals (CNCs). After the hydrolysis of dissolving pulp fibers with formic acid (FA), hydrophobic ester groups were introduced in CNCs, thereby increasing the surface hydrophobicity of PUF composites. CNCs acted as a reinforcement agent capable can replace 10% up to 60% prepolymer for foaming, the modified PUF exhibiting gradient morphology structure and enhanced specific mechanical and thermal properties. When the CNCs replacement ratio was 50%, the maximum compressive stress was 1103.19 kPa, which is 21-fold that of the original foam. Remarkably, the addition of CNCs enhanced thermal insulation performance of the prepared foam, which of thermal conductivity decreased from 0.0780 W/mK to 0.0549 W/mK. The upgraded polyurethane foam composites promise to open exciting new windows on producing fire resistance PUF with enhanced performance. [Display omitted] • PUF composites were fabricated by polyurethane prepolymer and CNCs. • Maximum compressive stress reached 1103.19 kPa at 50% replacement rate of CNCs. • Thermal conductivity of foams decreased from 0.0780 W/mK to 0.0549 W/mK. • Sustainable and economically feasible method for producing fire resistance PUF. [ABSTRACT FROM AUTHOR]

In this work, a facile microwave-assisted foaming and thermal imidization treatment method was proposed to fabricate flexible polyimide (PI)/rGO composite foams with anisotropic pore structures. The PI/rGO composite foams (PIF/rGO) were used as the starting derivatives to prepare carbon foams that demonstrated excellent anisotropic thermal insulation and electromagnetic interference (EMI) shielding applications. The directional growth of pore structures during the foaming period resulted in the formation of aligned ellipsoidal strip-like pore structure in the horizontal direction (i.e., perpendicular to the pore growth direction), which was attributed to the escape of foaming gases such as tetrahydrofuran, methanol and H 2 O. The homogeneous dispersion of rGO in the PI-derived carbon skeleton endowed corresponding carbon foams with excellent mechanical and thermal stability, high thermal insulation and electrical conductivity (σ) as well as absorption dominated EMI shielding performance. The σ and EMI shielding effectiveness (SE) of carbon foams showed an increasing trend with increasing rGO content. The σ, EMI SE and specific EMI SE of the carbon foams reached up to 33.0 S/m, 49.0 dB and 8792.8 dB/(g/cm2) in the horizontal direction, respectively. Therefore, this work provided a facile strategy to fabricate lightweight and anisotropic pore structure rGO-containing PIFs and carbonized derivatives, which demonstrated promising applications in high-end industrial fields. [Display omitted] • A facile strategy was proposed to prepare PIF/rGO and CF/rGO. • The directional growth of pores endowed foams with anisotropic properties. • The foams showed excellent mechanical and thermal insulation properties. • CF/rGO showed absorption-dominated EMI shielding performances. [ABSTRACT FROM AUTHOR]

It has been a great challenge to prepare high-expansion-ratio polylactide (PLA) foam with eminent thermal insulation and compression performance in packaging field. Herein, a naturally formed nanofiller halloysite nanotube (HNT) and stereocomplex (SC) crystallites were introduced into PLA with a supercritical CO 2 foaming method to improve foaming behavior and physical properties. The compressive performance and thermal insulation properties of the obtained poly(L-lactic acid) (PLLA)/poly(D-lactic acid) (PDLA)/HNT composite foams were successfully investigated. At a HNT content of 1 wt%, the PLLA/PDLA/HNT blend foam with an expansion ratio of 36.7 folds showed a thermal conductivity as low as 30.60 mW/(m·K). Meanwhile, the compressive modulus of PLLA/PDLA/HNT foam was 115% higher than that of PLLA/PDLA foam without HNT. Moreover, the crystallinity of PLLA/PDLA/HNT foam was dramatically improved after annealing, thus the results showed that compressive modulus of the annealed foam increased by as high as 72%, while it still maintained good heat insulation with the thermal conductivity of 32.63 mW/(m·K). This work provides a green method for the preparation of biodegradable PLA foams with admirable heat resistance and mechanical performance. • The PLLA/PDLA/HNT composite foams with high expansion ratios were fabricated by scCO 2. • The thermal conductivity of PLLA/PDLA/HNT composite foams was as low as 30.60 mW/(m·K). • The annealing process further improved the compressive performance of PLLA/PDLA/HNT composite foams. [ABSTRACT FROM AUTHOR]

Rigid polyimide foams (PIFs) with excellent mechanical and thermal properties were fabricated by thermal foaming of active cross-linkable units terminated polyester ammonium salts (PEAS) precursor powders. The active cross-linking strategy was realized by breaking C C bonds in maleic anhydride under heating treatment. Results showed that the formation of cross-linked structure before complete imidization effectively resisted matrix shrinkage and endowed PIFs with outstanding mechanical properties. The room temperature compressive strength and modulus of PIFs with four repeating units reached as high as 2.34 and 56.1 MPa, respectively. Moreover, the PIFs exhibited excellent thermal properties with onset decomposition temperatures ranging from 490 to 550 °C and the glass transition temperatures exceeding 290 °C. The PIFs displayed better thermal insulation, and the values of thermal conductivity fell within a range of 0.056–0.090 W m−1 K−1, which demonstrates potential application as high temperature resistant structural materials in aerospace and energy sectors. [Display omitted] • Rigid PIFs were fabricated by thermal foaming of active cross-linkable units terminated PEAS precursor powders. • Cross-linking structure was formed before complete imidization which endowed PIFs with outstanding mechanical properties. • Relationship between chain structure and properties of rigid PIFs were investigated. [ABSTRACT FROM AUTHOR]

Geopolymers have been a frequently studied topic during the last decades due to waste materials utilization, low energy demands, and low carbon dioxide emissions related to their production, which makes them very attractive within the current environmental trends. However, the original idea to use them as a concrete replacement showed to be unattainable in the nearest future, so other alternatives of geopolymers applications are being sought that could exploit the efforts spent and research progress made so far. This review paper summarizes the recent progress in the field of directly foamed geopolymers, as one of the alternatives, focusing on the material base, foaming and stabilization processes, and assessments of selected material parameters, as related to raw materials used and treatment techniques applied. As the main result, several gaps and challenges are identified that deserve more attention and deeper investigations, which can help to move the geopolymer foams closer towards their regular application in civil engineering. A detailed knowledge of hygric parameters and their influence on thermal properties, long-term performance analyses in real-world applications, or extension of the material base to achieve environmental more friendly solutions represent the most topical issues that are supposed to be addressed. • Recent progress in the field of directly foamed geopolymers is reviewed. • Foaming and stabilization processes are analyzed. • Material parameters are assessed and linked to raw materials and treatment techniques. • An overview of durability of geopolymer foams is given. • Several gaps in the current knowledge are identified that require deeper investigations. [ABSTRACT FROM AUTHOR]

• Unidirectional anisotropic PIAs have been prepared by freeze-drying. • The PIA shows excellent thermal stability and stable mechanical behavior. • The u -PIA-6 exhibits great strength, which is over twice as high as that of the TEEK-HH at 177 °C with a similar density. • The u -PIA shows great thermal insulation properties in anisotropic. Polyimide aerogels (PIAs) are the new type of high-performance lightweight material that combines the excellent thermal and mechanical behavior of polyimides with the highly porous and lightweight properties of aerogels. PIAs can meet the increasing material requirements of high-tech fields such as the aerospace and transportation industries. This study reports a series of all-aromatic anisotropic polyimide aerogels (p-phenylenediamine (PDA) and 3,3′,4,4′-biphenyltetracarboxylic dianhydride (s-BPDA)) with unprecedented behavior. These PIAs were synthesized using a random or unidirectional freeze-drying method followed by thermal imidization of the precursor solution. Their mechanical and thermal conductivity performance were anisotropic (u -PIA-8 strength: 1.86 and 0.14 MPa, thermal conductivity: 62.9 and 50.1 mW·m−1·K−1 along the axial and radial direction, respectively). Furthermore, the PIAs possessed excellent compression behavior in a wide temperature range from 25 °C to 316 °C, with a compressive strength over twice that of the commercial polyimide foam TEEK-HH (u -PIA-6 strength: 0.83 and 0.32 MPa at 177 and 316 °C, TEEK-HH strength: 0.31 MPa at 177 °C). These aerogels also demonstrated good thermal insulation performance after being held at 300 °C for 20 min (u -PIA-8: 76.3 °C at 25 mm). These highly anisotropic aerogels exhibit flexible thermal protection properties that extend the potential use of PIAs to applications such as high-temperature-resistant rocket fairings, sandwich structures, and arc-shaped structures for aerobats or the automobile industry. [ABSTRACT FROM AUTHOR]

• WMGFs were successfully prepared via chemical foaming method. • Wollastonite significantly improved mechanical strength of geopolymer foams. • WMGFs exhibited effective thermal insulation under high temperature exposure. This paper aims to investigate the physical properties and fire resistance of wollastonite-metakaolin-based geopolymer foams (WMGFs). Both compressive and flexure strengths of WMGFs are significantly improved since wollastonite fibers possess inherent stiffness and provide effective crack control. Meanwhile, wollastonite addition promotes viscosity of geopolymer slurry to some extent and then determines pores formation in foaming process, which is also crucial for mechanical strength development. The thermal conductivity of the specimens rises triflingly with elevated wollastonite addition corresponding to slightly decrease in porosity. Owing to the steady skeleton structure of WMGFs, the highest reverse-side temperature of sliced blocks is merely 202.7 °C after exposed to fire for 3 h, showing that the reduction in thermal conductivity has no negative impact on fire resistance of specimens. Physicochemical stability of wollastonite under high temperature and alkaline environment is confirmed to be vital for sustaining integrated porous skeleton structure of geopolymer foams. Therefore, geopolymer foams reinforced by wollastonite possess extraordinary mechanical strength and fire resistance, revealing strong possibility for fire protection. [ABSTRACT FROM AUTHOR]

Polyimide (PI) foams possess excellent mechanical properties, high-temperature resistance, and other unique properties, which facilitate impact in aerospace, automotive, and microelectronics industries. However, when they are used as lightweight insulation structural layers for high-temperature carbon fiber reinforced composites, improvement in thermal-insulating properties and temperature resistance of PI foams without compromising the flexibility in extreme environments is a challenging task. In this study, the flexible blocks were linked into rigid polymeric structures to fabricate a thermoplastic structure through a simple aqueous strategy to construct hydrogen-bonding networks. Thus, with a low shrinkage of 8.42%, an ultrahigh compressive modulus of 11.17 MPa, and a specific modulus of 81.03 MPa cm3 g−1 was successfully achieved. Benefitting from the formation of ultra-strong network backbones, foams showed excellent thermal-insulating properties and temperature resistance. The robust porous material with thermal-insulating properties (0.0481 W m−1 K−1) exhibited a compression modulus of 4.21 MPa after heat treatment at 300 °C and maintained 91% strength retention, thus it can be used as lightweight heat-insulation composite sandwich structures up to 300 °C. The copolymer foam obtained by using 30 mol% flexible blocks reserves its high flexibility undergoing only 10% dimensional changes after 40,000 compression-release cycles. The lightweight thermoplastic PI foams with flexibility, thermal-insulating properties, and temperature resistance can be used for high-temperature lightweight composite sandwich structures in aeronautics and space exploration. Preparing flexible thermoplastic polyimide foams with exceptional mechanical, thermal insulating properties, and temperature resistance through a simple aqueous strategy. [Display omitted] [ABSTRACT FROM AUTHOR]

New organic-inorganic polyurethane-based hybrids with enhanced mechanical properties and thermal insulation properties are reported. Polyurethane-based hybrids are characterized by the intimate interactions of their inorganic and organic co-networks and prepared by sol-gel approach, have exhibited properties exceeding those of polyurethane foams, e.g. enhanced thermal stability, durability and thermal insulating effectiveness. However, mechanical properties have previously been poor. Here, new porous organic-inorganic materials consisting of a polyurethane network modified by in-situ formation of aerogel-like polysiloxane domains, were developed. They exhibit a multiscale-porosity which enhances the insulation, mechanical and thermal properties. The synthesis was performed through a novel stepwise process consisting of: preparation of a siloxane precursor based on methyl-triethoxysilane and tetraethoxysilane; functionalization of traditional polyol for polyurethane foams with 3-(triethoxysilanepropyl)isocyanate as coupling agent; use of suitable catalysts and silicone surfactants; and foaming with methylene-di-isocyanate compound. The siloxane precursors and coupling agent led to formation of "aerogel-like" polysiloxane domains within the walls and struts of the polyurethane foams. The synthesis method enabled increased incorporation of the "aerogel-like" polysiloxane structures into the foams, compared to literature, with 20 wt% SiO 2 , reducing thermal conductivity of the hybrid foams 30% compared with pristine polyurethane, in addition to significant improvement in thermal stability and mechanical properties. [Display omitted] [ABSTRACT FROM AUTHOR]