Search

Excitation functions were measured by the activation method using the stacked-foil technique for the natMo(p,x)93(m+g),94m,g,95m,g,96(m+g),99mTc, 92m,95Nb reactions up to 18 MeV. The experimental results were compared with literature data and theoretical results from EMPIRE-3.2.2 code and TENDL. Special attention was paid to the 100Mo(p,2n)99mTc reaction which is very promising for the production of 99mTc at a cyclotron. In order to optimize the production conditions of some medically important Tc isotopes, the integral yields were estimated based on the measured cross sections.

Excitation functions were measured by the activation method using stacked-foil technique for the natSr(p,xn)88,87m,g,86m,gY reactions up to 18 MeV. The experimental results were compared with the theoretical data from EMPIRE-3.2 code and TENDL. Integral yields of 88,87m,g,86m,gY were estimated based on the measured cross sections. The optimum energy range for the production of the important isotope 88Y is Ep = 16→11 MeV, 88Y yield amounts to about 3 MBq/µAh.

The rapid synthesis of two radiofluoronicotinamide derivatives, namely, [18F]MEL050 and [18F]MEL-2F has been simply performed starting from commercial materials. [18F]MEL-2F is a new, potential analogue PET-probe for melanoma imaging. [18F]MEL050 is already an excellent PET imaging probe for early specific diagnosis. The synthesis involves coupling step to obtain the precursor followed by radiofluorination. During the synthesis of the precursors different coupling reagents, such as HBTU, TFFH, HOBT, COMU and PyCIU have been applied. PyClU was found the best to reduce the coupling period to

Understanding the nature of polymers used as nuclear detectors is crucial to enhance their behaviors. In this work, the induced modifications in wettability and etching properties of Hostaphan and Makrofol polymers irradiated by different fluences of thermal neutrons are investigated. The wetting properties are studied by contact angle technique which showed the spread out of various liquids over the irradiated polymers surfaces (wettability enhanced). This wetting behavior is attributed to the induced changes in surface free energy (SFE), morphology, roughness, structure, hardness, and chemistry. SFE values are calculated by three different models and found to increase after neutrons irradiation associated with differences depending on the used model. These differences result from the intermolecular interactions in the liquid/polymer system. Surface morphology and roughness of both polymers showed drastic changes after irradiation. Additionally, surface structure and hardness of pristine and irradiated polymers were discussed and correlated to the surface wettability improvements. The changes in surface chemistry are examined by Fourier transform infrared spectroscopy (FTIR), which indicate an increase in surface polarity due to the formation of polar groups. The irradiated polymers etching characteristics and activation energies are discussed as well. Lastly, it is evident that thermal neutrons show efficiency in improving surface wettability and etching properties of Hostaphan and Makrofol in a controlled way.

Iodobenzamides are reported to possess some affinity for melanoma. This study describes the synthesis of a new benzamide analogue, N-(2-diethylamino-ethyl)-4-(4-chloro-nicotinamido)-5-[125I]iodo-2-methoxybenzamide ([125I]H4) designed to target melanoma. The synthesis was simply achieved in four steps. There were two PyCIU/DIPEA amide condensations and a transfer hydrogenation using an ammonium formate hydrogen donor. The radioiodination step was carried out with 125I via an electrophilic substitution reaction. The reaction conditions were optimized. The labeled compound was purified by HPLC. The maximum radiochemical yield was found to be 78% at a radiochemical purity of 98%. All compounds were characterized by MS and NMR techniques. The log P value for [125I]H4 was found as 3.96±0.5.

Using stacked-foil activation technique and gamma-ray spectrometry, excitation functions for 3He induced nuclear reactions on natV were measured. Cross-sections for natV(3He, xn)52m,gMn and natV(3He, pxn)51Cr nuclear reactions were measured up to 27 MeV utilizing the MGC-20E cyclotron of ATOMKI. The measurements establish for the first time consistent excitation curves. Comparisons with results for values derived from different theoretical codes were included. Integral yield were calculated.

Excitation functions were measured by the activation method using stacked-foil technique for the

Excitation functions for $$\alpha $$ -induced reactions on natural vanadium were measured in the energy range up to 20 MeV. The stacked-foil activation technique was used. The experimental results were compared with the theoretical calculations using EMPIRE-3.1, EMPIRE-3.2.2 and TENDL 2015, and with earlier experimental results. Thick target yields were calculated for the production of $$^{54}\hbox {Mn}$$ and for the associated impurity $$^{52}\hbox {Mn}$$ .

One-dimensional nanoferroic rods of BaTiO 3 were synthesized by improved citrate auto-combustion technology using tetrabutyl titanate. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), transmission electron microscopy (TEM), atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR) have been used to characterize the prepared sample. The results indicated that the crystal structure of BaTiO 3 is tetragonal phase with an average crystallite size of 47 nm. SEM image gives a cauliflower-like morphology of the agglomerated nanorods. The stoichiometry of the chemical composition of the BaTiO 3 ceramic was confirmed by EDX. TEM micrograph exhibited that BaTiO 3 nanoparticles have rod-like shape with an average length of 120 nm and width of 43 nm. AFM was used to investigate the surface topography and its roughness. The topography image in 3D showed that the BaTiO 3 particles have a rod shape with an average particle size of 116 nm which in agreement with 3D TEM result.

Excitation functions of 3He induced nuclear reactions on natSn were measured up to 26 MeV using the stacked-foil technique, utilizing the MGC-20E cyclotron of ATOMKI. Using HPGe detector the following radioisotopes were identified: 116,117,118,119g,119m,121g,121m,123mTe, 115g,116m,117,118m,120m,122g,124gSb and 113g,117mSn. The experimental results are presented for the first time in this energy range. The results of theoretical calculations based on EMPIRE and TENDL library were compared with the present data. Integral yields for some isotopes were calculated.

The broad-spectrum antibiotic agents have been demonstrated as promising diagnostic tools for early detection of infectious lesions. We set out ofloxacin (Oflo), a second-generation fluoroquinolone, for the radioiodination process. In particular, this was carried out with 125I via an electrophilic substitution reaction. The radiochemical yield was influenced by different factors; drug concentration, different oxidizing agents, e.g. chloramine-T, iodogen and n-bromosuccinimide, pH of medium, reaction time, temperature and different organic media. These parameters were studied to optimize the best conditions for labeling with ofloxacin. We found that radiolabeling in ethanol medium showed a 70% radiochemical yield of 125I-ofloxacin. The radioiodination was determined by means of TLC and HPLC. The cold labeled Oflo (127I-Oflo) was prepared and controlled by HPLC. The cold labeled Oflo was also confirmed by NMR and MS techniques. Furthermore, biodistribution studies for labeled 125I-Oflo were examined in two independent groups (3 mice in each one); control and E. Coli-injected (inflamed). The radiotracer showed a good localization in muscle of thigh for inflamed group as compared to control. In conclusion, ofloxacine might be a promising target as an anti-inflammatory imaging agent.

Radioiodinated MIP-1145, which specifically targets melanin, is an ideal candidate for targeted therapy of melanoma. An analogue of MIP-1145 lacking the iodo-substituent (desiodo-MIP-1145) was synthesized as a labeling precursor in three simple steps. The radioiodination of desiodo-MIP-1145 by iodine-125 was carried out via an electrophilic substitution reaction. An optimization study for the iodination reaction was carried out. The labeled compound was isolated and purified by means of electrophoresis and HPLC. The maximum radiochemical yield, 76%, was obtained with radiochemical purity greater than 99%. The log P value for [(125) I]MIP-1145 was measured as 4.5.

The rapid synthesis of two radiofluoronicotinamide derivatives, namely, [

A theoretical study of the nuclear reaction cross-section for the production of 64Cu and 86Y was performed from the nuclear reactions 64Ni(p, n) 64Cu, 64Ni(d, 2n) 64Cu, 66Zn(d, α)64Cu, 68Zn(p, n α)64Cu, 86Sr(p, n) 86gY, 87Sr(p, 2n) 86gY and 88Sr(p, 3n) 86gY. The calculations were performed using three codes EMPIRE, TALYS and ALICE-IPPE. The excitation function curves for the investigated reactions have been constructed from the enriched targets using 64Ni, 66Zn, 68Zn, 86Sr, 87Sr and 88Sr. The calculated excitation functions and the experimental data were compared. Mean standardized deviation, mean relative deviation and mean ratio statistical parameters were introduced to control the quality of the fitting between both the experimentally and the theoretically calculated cross-sections.

Radioiodinated MIP-1145, which specifically targets melanin, is an ideal candidate for targeted therapy of melanoma. An analogue of MIP-1145 lacking the iodo-substituent (desiodo-MIP-1145) was synthesized as a labeling precursor in three simple steps. The radioiodination of desiodo-MIP-1145 by iodine-125 was carried out via an electrophilic substitution reaction. An optimization study for the iodination reaction was carried out. The labeled compound was isolated and purified by means of electrophoresis and HPLC. The maximum radiochemical yield, 76%, was obtained with radiochemical purity greater than 99%. The log P value for [(125) I]MIP-1145 was measured as 4.5.