428 results on '"Park, Jun Sang"'
Search Results
2. Practical Approach to Mission Autonomy of Multiple Unmanned Air Mobilities
3. Rapid detection of rare events from in situ X-ray diffraction data using machine learning
4. Formation of the γʹʹʹ-Ni2(Cr, Mo, W) Phase During a Two-Step Aging Heat Treatment in HAYNES® 244® Alloy
5. Disrupting FKF1 homodimerization increases FT transcript levels in the evening by enhancing CO stabilization
6. Structural changes across thermodynamic maxima in supercooled liquid tellurium: a water-like scenario
7. In Situ X-ray Diffraction Investigation of Hydrogen Effects on Deformation-Induced Phase Transformation in Forged and Additively Manufactured 304L Stainless Steels
8. In situ measurement of three-dimensional intergranular stress localizations and grain yielding under elastoplastic axial-torsional loading
9. Thermo-mechanical behavior of hypoeutectic Ni-Y-Zr alloys
10. Direct measurement of the effective properties of an additively manufactured titanium octet truss unit cell using high energy X-ray diffraction
11. Effect of irradiation-induced strength anisotropy on the reorientation trajectories and fragmentation behavior of grains in BCC polycrystals under tensile loading
12. A Coupled Small and Wide-Angle X-Ray Scattering Study of Phase Transformation Mechanisms in U-6Wt Pct Nb
13. BraggNN: Fast X-ray Bragg Peak Analysis Using Deep Learning
14. Four-dimensional microstructurally small fatigue crack growth in cyclically loaded nickel superalloy specimen
15. In situ probing of interfacial roughness and transient phases during ceramic cold sintering process
16. Polymorphism of garnet solid electrolytes and its implications for grain-level chemo-mechanics
17. High-energy coherent X-ray diffraction microscopy of polycrystal grains: first steps towards a multi-scale approach
18. The role of Ca on the microstructure and tensile properties of Mg-Al-Zn-Ca alloys
19. Phase retrieval for Bragg coherent diffraction imaging at high X-ray energies
20. Mapping 3D grain and precipitate structure during in situ mechanical testing of open-cell metal foam using micro-computed tomography and high-energy X-ray diffraction microscopy
21. Sparse recovery of undersampled intensity patterns for coherent diffraction imaging at high X-ray energies
22. Microstructure analysis of bismuth absorbers for transition-edge sensor X-ray microcalorimeters
23. In situ synchrotron tensile investigations on ultrasonic additive manufactured (UAM) zirconium
24. Stresses within rare-earth doped yttria-stabilized zirconia thermal barrier coatings from in-situ synchrotron X-ray diffraction at high temperatures
25. Investigation of the fatigue crack behavior of 304 stainless steels using synchrotron X-ray tomography and diffraction: Influence of the martensite fraction and role of inclusions
26. Time-resolved phase and compositional homogenization of segregated uranium-niobium alloys above the monotectoid temperature
27. A study on texture stability and the biaxial creep behavior of as-hydrided CWSR Zircaloy-4 cladding at the effective stresses from 55 MPa to 65 MPa and temperatures from 300 °C to 400 °C
28. Developing ductile and isotropic Ti alloy with tailored composition for laser powder bed fusion
29. 4D evolution of Cr23C6 precipitates in neutron-irradiated and annealed HT-UPS steel observed via synchrotron micro-computed tomography
30. Eliminating the non-Gaussian spectral response of X-ray absorbers for transition-edge sensors
31. Rapid detection of rare events from in situ X‐ray diffraction data using machine learning.
32. Influences of Granular Constraints and Surface Effects on the Heterogeneity of Elastic, Superelastic, and Plastic Responses of Polycrystalline Shape Memory Alloys
33. AFRL Additive Manufacturing Modeling Series: Challenge 1, Characterization of Residual Strain Distribution in Additively-Manufactured Metal Parts Using Energy-Dispersive Diffraction
34. Deep learning approaches to semantic segmentation of fatigue cracking within cyclically loaded nickel superalloy
35. Evaluate Healing Performance of Asphalt Mixture Containing Steel Slag by Using Induction and Microwave Heating
36. Origins of high ductility exhibited by an extruded magnesium alloy Mg-1.8Zn-0.2Ca: Experiments and crystal plasticity modeling
37. Synchrotron x-ray diffraction and crystal plasticity modeling study of martensitic transformation, texture development, and stress partitioning in deep-drawn TRIP steels
38. AFRL Additive Manufacturing Modeling Series: Challenge 4, In Situ Mechanical Test of an IN625 Sample with Concurrent High-Energy Diffraction Microscopy Characterization
39. Evaluating the Taylor hardening model in polycrystalline Ti using high energy X-ray diffraction microscopy
40. Direct observations and characterization of crack closure during microstructurally small fatigue crack growth via in-situ high-energy X-ray characterization
41. Modeling Ti–6Al–4V using crystal plasticity, calibrated with multi-scale experiments, to understand the effect of the orientation and morphology of the α and β phases on time dependent cyclic loading
42. Microstructure Characterization of Nb3Sn Wires With Nanoprecipitate Artificial Pinning Centers Using Synchrotron High-Energy X-Rays
43. Microstructure-Based Estimation of Strength and Ductility Distributions for α+β Titanium Alloys
44. A complete grain-level assessment of the stress-strain evolution and associated deformation response in polycrystalline alloys
45. Void coalescence and ductile failure in IN718 investigated via high-energy synchrotron X-ray tomography and diffraction
46. Highly deformable Mg–Al–Ca alloy with Al2Ca precipitates
47. High-energy synchrotron x-ray study of deformation-induced martensitic transformation in a neutron-irradiated Type 316 stainless steel
48. Effects of heat treatment and build orientation on the evolution of ϵ and α′ martensite and strength during compressive loading of additively manufactured 304L stainless steel
49. Effect of heat treatment on the tensile behavior of selective laser melted Ti-6Al-4V by in situ X-ray characterization
50. Classifications of Prominent Mandibular Angle and Surgical Considerations for Mandibuloplasty
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.