Search

Abstract Negative pressure wound therapy with instillation and dwell time (NPWTi-d) is increasingly used for a diverse range of wounds. Meanwhile, the topical wound irrigation solution consisting of polyhexamethylene biguanide and betaine (PHMB-B) has shown efficacy in managing wound infections. However, the effectiveness of this solution as a topical instillation solution for NPWTi-d in patients with diabetic foot infections (DFIs) has not been thoroughly studied. The objective of this retrospective study was to evaluate the impact of using PHMB-B as the instillation solution during NPWTi-d on reducing bioburden and improving clinical outcomes in patients with DFIs. Between January 2017 and December 2022, a series of patients with DFIs received treatment with NPWTi-d, using either PHMB-B or normal saline as the instillation solution. Data collected retrospectively included demographic information, baseline wound characteristics, and treatment outcomes. The study included 61 patients in the PHMB-B group and 73 patients in the normal saline group, all diagnosed with DFIs. In comparison to patients treated with normal saline, patients with PHMB-B exhibited no significant differences in terms of wound bed preparation time (P = 0.5034), length of hospital stay (P = 0.6783), NPWTi-d application times (P = 0.1458), duration of systematic antimicrobial administration (P = 0.3567), or overall cost of hospitalization (P = 0.6713). The findings of the study suggest that the use of either PHMB-B or normal saline as an instillation solution in NPWTi-d for DFIs shows promise and effectiveness, yet no clinical distinction was observed between the two solutions.

Human papilloma virus (HPV) infection and its progression still represent a great medical challenge worldwide. Clinical evidence has demonstrated the beneficial effects of polyhexamethylene biguanide (PHMB) on HPV clinical manifestations; however, evidence of the effect of this molecule on HPV viral load is still lacking. In this in vitro study, 13 ThinPrep Papanicolaou (Pap) tests were treated with a PHMB solution (0.10 g/100 mL) for 2 h. We observed no cytological changes but a significant reduction in the viral load of high-risk (HR) HPV after PHMB treatment, also revealing a dose-dependent antiviral effect. In addition, by stratifying the obtained results according to HR-HPV genotype, we observed a significant reduction in the viral load of HPV 16, P2 (56, 59, 66), 31, and P3 (35, 39, 68) and a strong decrease in the viral load of HPV 45, 52, and P1 (33, 58). Overall, 85% of the analyzed cervical cell samples exhibited an improvement in HPV viral load after PHMB exposure, while only 15% remain unchanged. For the first time, the data from this pilot study support the activity of PHMB on a specific phase of the HPV viral lifecycle, the one regarding the newly generated virions, reducing viral load and thus blocking the infection of other cervical cells.

Background: In burn care, achieving swift healing with minimal complications remains paramount. This investigation assesses the role of polyhexamethylene biguanide (PHMB) in managing pediatric superficial partial-thickness burns, focusing on the effects of various patient-specific factors on recovery. Methods: Through a retrospective analysis of 27 pediatric cases treated with PHMB, we evaluated the impact of age, burn size, dressing frequency, treatment delay, cold therapy application, and analgesic usage on the time until reepithelialization (TTRE). Results: The majority of patients benefited from early cold therapy, yet only 1 in 3 patients received analgesics. A mean healing time of 8.78 (SD: 2.64) days was observed, with the extent of the burn showing a strong correlation (r: 0.63) to TTRE. Most treatments were managed outpatient, evidenced by a negligible average hospital stay (0.96 days), with recorded no complications. Conclusions: Our findings endorse PHMB as a promising treatment for superficial second-degree burns in young patients, due to the observed stable and rapid wound closure without the association of increased risks. Continued exploration into the optimal application of prehospital interventions and the comprehensive benefits of PHMB in pediatric burn management is necessary. Future research should assess long-term outcomes, including functionality, scar quality, and patient satisfaction. [ABSTRACT FROM AUTHOR]

Negative pressure wound therapy with instillation and dwell time (NPWTi-d) is increasingly used for a diverse range of wounds. Meanwhile, the topical wound irrigation solution consisting of polyhexamethylene biguanide and betaine (PHMB-B) has shown efficacy in managing wound infections. However, the effectiveness of this solution as a topical instillation solution for NPWTi-d in patients with diabetic foot infections (DFIs) has not been thoroughly studied. The objective of this retrospective study was to evaluate the impact of using PHMB-B as the instillation solution during NPWTi-d on reducing bioburden and improving clinical outcomes in patients with DFIs. Between January 2017 and December 2022, a series of patients with DFIs received treatment with NPWTi-d, using either PHMB-B or normal saline as the instillation solution. Data collected retrospectively included demographic information, baseline wound characteristics, and treatment outcomes. The study included 61 patients in the PHMB-B group and 73 patients in the normal saline group, all diagnosed with DFIs. In comparison to patients treated with normal saline, patients with PHMB-B exhibited no significant differences in terms of wound bed preparation time (P = 0.5034), length of hospital stay (P = 0.6783), NPWTi-d application times (P = 0.1458), duration of systematic antimicrobial administration (P = 0.3567), or overall cost of hospitalization (P = 0.6713). The findings of the study suggest that the use of either PHMB-B or normal saline as an instillation solution in NPWTi-d for DFIs shows promise and effectiveness, yet no clinical distinction was observed between the two solutions. [ABSTRACT FROM AUTHOR]

As antibiotic resistance increasingly undermines traditional infection management strategies, there is a critical demand for innovative wound care solutions that address these emerging challenges. This study introduces a novel antibacterial wound dressing based on Cross-Linked Pullulan (Pul) and Polyhexamethylene Biguanide (PHMB) for enhanced wound management and infection control. The dressing's adsorption rate reached 200% of its original weight within 30 min, exceeded 300% after 5 h, and exhibited significant non-Newtonian fluid properties. The dressings were able to release the loaded medication completely within 20 min; additionally, the dressing demonstrated significant antibacterial activity against a broad spectrum of bacteria. Significantly, the therapeutic effects of the Pul-PHMB/GP dressing were evaluated in a mouse model. Compared to untreated wounds, wounds treated with Pul-PHMB/GP exhibited a significant gelation process within 5 min post-treatment and showed a significant increase in wound healing rate within 12 days. This powder preparation overcomes the limitations associated with liquid and gel dressings, notably in storage and precise application, preventing the premature expansion or dissolution often caused by PHMB in high-humidity environments. The powder form can transform into a gel upon contact with wound exudate, ensuring accurate coverage of irregular wounds, such as those from burns or pressure sores, and offers excellent chemical and physical stability in a dry state, which facilitates storage and transport. This makes the dressing particularly suitable for emergency medical care and precision therapy, significantly improving the efficiency and adaptability of wound treatment and providing robust support for clinical treatments and emergency responses. [ABSTRACT FROM AUTHOR]

Objective: There is currently a wide range of cleansing and irrigation solutions available for wounds, many of which contain antimicrobial agents. The aim of this study was to assess the safety of HydroClean Solution (HARTMANN, Germany), a polyhexamethylene biguanide (PHMB)-containing irrigation solution, in a standard cytotoxicity assay, and to assess its effect in a three-dimensional (3D) full-thickness model of human skin. Method: A number of commercially available wound cleansing and irrigation solutions, including the PHMB-containing irrigation solution, were tested in a cytotoxicity assay using L929 mouse fibroblasts (ISO 10993-5:2009). The PHMB-containing irrigation solution was then assessed in an in vitro human keratinocyte–fibroblast 3D full-thickness wounded skin model to determine its effect on wound healing over six days. The effect of the PHMB-containing irrigation solution on tissue viability was measured using a lactate dehydrogenase (LDH) assay, and proinflammatory effects were measured using an interleukin-6 (IL-6) production assay. Results: The PHMB-containing irrigation solution was shown to be equivalent to other commercially available cleansing and irrigation solutions when tested in the L929 fibroblast cytotoxicity assay. When assessed in the in vitro 3D human full-thickness wound healing model, the PHMB-containing irrigation solution treatment resulted in no difference in levels of LDH or IL-6 when compared with levels produced in control Dulbecco's phosphate-buffered saline cultures. There was, however, a pronounced tissue thickening of the skin model in the periwound region. Conclusion: The experimental data presented in this study support the conclusion that the PHMB-containing irrigation solution has a safety profile similar to other commercially available cleansing and irrigation solutions. Evidence also suggests that the PHMB-containing irrigation solution does not affect tissue viability or proinflammatory cytokine production, as evidenced by LDH levels or the production of IL-6 in a 3D human full-thickness wound healing model. The PHMB-containing irrigation solution stimulated new tissue growth in the periwound region of the skin model. [ABSTRACT FROM AUTHOR]

Acanthamoeba, a free-living amoeba, is commonly found in various natural environments, such as rivers and soil, as well as in public baths, swimming pools, and sewers. Acanthamoeba can cause severe illness such as granulomatous amoebic encephalitis and Acanthamoeba keratitis (AK) in humans. AK, the most recognized disease, can cause permanent visual impairment or blindness by affecting the cornea. AK commonly affects contact lens wearers who neglect proper cleaning habits. The symptoms of AK include epithelial and stromal destruction, corneal infiltrate, and intense ocular pain, occasionally necessitating surgical removal of the entire eyeball. Current AK treatment involves the hourly application of eye drops containing polyhexamethylene biocide (PHMB). However, studies have revealed their ineffectiveness against drug-resistant strains. Acanthamoeba can form cysts as a survival mechanism in adverse environments, though the exact mechanism remains unknown. Our experiments revealed that sodium P-type ATPase (ACA1_065450) is closely linked to encystation. In addition, various encystation buffers, such as MgCl2 or NaCl, induced the expression of P-type ATPase. Furthermore, we used ouabain, an ATPase inhibitor, to inhibit the Na+/K+ ion pump, consequently decreasing the encystation rate of Acanthamoeba. Our primary objective is to develop an advanced treatment for AK. We anticipate that the combination of ouabain and PHMB may serve as an effective therapeutic approach against AK in the future.

Jennifer Corwin-Buell, Denise Callahan, Deborah McGrath, Kimberly Millard, Gary Mosehauer, Nitasha R Phatak Vision Care, Bausch & Lomb Incorporated, Rochester, NY, USACorrespondence: Nitasha R Phatak, Vision Care, Bausch & Lomb Incorporated, Rochester, NY, USA, Tel +1 585-413-6397, Email Nitasha.Phatak@bausch.comPurpose: This study was conducted to evaluate and compare the in vitro disinfection efficacies of six commercial lens cleaning and disinfecting products for planned replacement soft contact lenses.Methods: Disinfection efficacies of five multi-purpose solutions (MPSs) and one hydrogen peroxide solution (HPS) as control were evaluated in the presence of organic soil according to the International Organization for Standardization (ISO, Geneva, Switzerland) ISO 14729 stand-alone test protocol. The five specified compendial organisms, three bacteria (Staphylococcus aureus, Pseudomonas aeruginosa, and Serratia marcescens) and two fungi (Candida albicans and Fusarium solani) were incubated with each solution under standard conditions, after which microbes were recovered and quantified.Results: Each of the solutions evaluated met or exceeded the standard’s primary criteria (3-log reduction of bacteria and 1-log reduction of fungi) after incubation for the manufacturer-recommended soaking time, except for COMPLETE MPS, which achieved only 0.4 ± 0.1 average log reduction for C. albicans. However, differences in efficacy between the solutions were noted. Average log reduction across all microbes for Biotrue Hydration Plus (4.6 ± 0.1) was comparable to that for CLEAR CARE PLUS HPS (4.3 ± 0.1) and greater than those for OPTI-FREE puremoist (3.6 ± 0.1), OPTI-FREE Replenish (4.0 ± 0.2), ACUVUE RevitaLens (3.9 ± 0.03), and COMPLETE MPS (3.6 ± 0.1). Biotrue Hydration Plus was especially effective at reducing the population of C. albicans (4.2 ± 0.7-log reduction).Conclusion: Products marketed for planned replacement soft CL disinfection generally meet the ISO 14729 standard’s primary criteria for reducing populations of compendial organisms, with larger differences between solutions noted with C. albicans.Keywords: multi-purpose solution, MPS, hydrogen peroxide solution, HPS, disinfection, myristamidopropyl dimethylamine, MAPD, polyhexamethylene biguanide, PHMB, ISO 14729

Copyright of Nővér is the property of Chamber of Hungarian Health Care Professionals and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The development of highly effective metal–zeolite bifunctional catalysts for the hydroisomerization of n-alkanes is a paramount strategy to produce second-generation biofuels with high quality. In this study, polyhexamethylene biguanide hydrochloride (PHMB) is precisely added to the initial gel to synthesize nanosized ZSM-23 zeolites (Z23-xPH). Due to orientation adsorption and steric hindrance effects of PHMB, each sample of Z23-xPH demonstrates enhanced mesoporosity in comparison with the conventional Z23-C zeolite. Furthermore, the Brønsted acid density of the Z23-xPH samples is also significantly reduced due to a reduction in the distribution of framework Al at T2–T5 sites. The corresponding Pd/23-C and Pd/Z23-xPH bifunctional catalysts with 0.5 wt% Pd loading for n-hexadecane hydroisomerization are prepared by incorporating ZSM-23 zeolites as acid supports. According to the catalytic test results, the suitable addition of PHMB can effectively promote the iso-hexadecane yield. The Pd/Z23-2PH catalyst with an nPHMB/nSi molar ratio of 0.002 demonstrates the highest maximum iso-hexadecane yield of 74.1% at an n-hexadecane conversion of 88.3%. Therefore, the employment of PHMB has provided a simple route for the development of highly effective Pd/ZSM-23 catalysts for n-alkane hydroisomerization. [ABSTRACT FROM AUTHOR]

Copyright of Alexandria Journal of Food Science & Technology is the property of Egyptian National Agricultural Library (ENAL) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Aims: We evaluated a novel disinfectant (VR) and seven comparators (disinfectants A–G) against resistant pathogens common in healthcare settings. Methods and Results: VR at different dilutions, along with commercial disinfectants A–G, was tested against surrogate viruses, and resistant bacterial and fungal pathogens. Surrogate viruses had an initial concentration of ~1 × 108 mL−1, and bacterial and fungal isolates had an initial concentration of ~1 × 106 mL−1 on Siliconee surfaces. After the application of VR or a comparator disinfectant, surfaces were tested for the reduction in microbial loads after 30 s and 5 min wet exposures, and after a 24 h dry residue exposure. Sterile deionized water was used as a control. The VR at a concentration of 4.68% was superior to all comparator disinfectants against most pathogens in wet and dry testing. The VR at 7.8% concentration showed the highest pathogen-reduction rate among all comparator disinfectants when tested against all pathogens. Conclusions: Overall, the novel VR disinfectant was the most effective disinfectant in both wet and dry residue states against the range of tested pathogens. Significance and Impact of the Study: VR is a broadly effective disinfectant combination for use in high-risk settings, particularly those in which intervals between applications of disinfectant can be lengthy or inconsistent.

An inverse T shape structure, consisting of two perpendicular cavities coupled with a bus-waveguide truncated by a block, has been proposed and investigated numerically. Multi Fano resonance, attributing to the interaction of one continuous and two discrete states, can be observed in transmission spectrum. The numerical results are demonstrated by the coupled mode theory. At the same time, it is feasible to produce multi Fano resonance which derive from the splitting of different order modes by adjusting D value, which has been well explained theoretically. When the inverse T shape is filled with Polyhexamethylene biguanide (PHMB), a perfect absorbing coating to monitor the CO2 concentration, the structure can be served as a high sensitivity CO2 detector, whose sensitivity can up to 303 pm/ppm. In addition, the sensitivity of this proposed structure is ∼2.23 times higher than the previous work. The proposed structure has the advantages of simple, compact and easy fabrication. The results represented in this study may have potential applications in sensing and CO2 detector, which can provide the guideline to design other types of gas detector.

Chronic wounds and their treatment present a significant burden to patients and healthcare systems alike, with their management further complicated by bacterial infection. Historically, antibiotics have been deployed to prevent and treat infections, but the emergence of bacterial antimicrobial resistance and the frequent development of biofilms within the wound area necessitates the identification of novel treatment strategies for use within infected chronic wounds. Here, several non-antibiotic compounds, polyhexamethylene biguanide (PHMB), curcumin, retinol, polysorbate 40, ethanol, and D-α-tocopheryl polyethylene glycol succinate 1000 (TPGS) were screened for their antibacterial and antibiofilm capabilities. The minimum inhibitory concentration (MIC) and crystal violet (CV) biofilm clearance against two bacteria frequently associated with infected chronic wounds, Staphylococcus aureus and Pseudomonas aeruginosa, were determined. PHMB was observed to have highly effective antibacterial activity against both bacteria, but its ability to disperse biofilms at MIC levels was variable. Meanwhile, TPGS had limited inhibitory activity but demonstrated potent antibiofilm properties. The subsequent combination of these two compounds in a formulation resulted in a synergistic enhancement of their capability to kill both S. aureus and P. aeruginosa and disperse their biofilms. Collectively, this work highlights the utility of combinatory approaches to the treatment of infected chronic wounds where bacterial colonization and biofilm formation remains significant issues. [ABSTRACT FROM AUTHOR]

Highly b‐oriented MFI zeolite (abbreviated as BOMZ) membranes are attractive due to less grain boundary defects and straight channels normal to the substrate, enhancing selectivity and flux in membrane separation. Herein, we demonstrate a novel, effective and easily‐amplified printing‐transfer oriented‐seed‐layer technique to manufacture uniform BOMZ seed monolayer on porous supports. Furthermore, a facile and effective approach for the synthesis of highly BOMZ membranes by introducing poly(hexamethylene biguanide) hydrochloride as a twin crystal inhibitor during seeded growth is demonstrated. Well‐intergrown BOMZ membranes (∼650 nm thick) obtained on porous Al2O3 supports show a flux of 2.8 kg m−2 h−1 with a separation factor as high as 71 for pervaporation in the 60 °C feed of EtOH/H2O (5 wt%), which is much higher than those of random membranes. The developed seed assembly technique on porous supports underlines great potential for facile preparation of oriented seed layers on porous supports. [ABSTRACT FROM AUTHOR]

Aims: We evaluated a novel disinfectant (VR) and seven comparators (disinfectants A–G) against resistant pathogens common in healthcare settings. Methods and Results: VR at different dilutions, along with commercial disinfectants A–G, was tested against surrogate viruses, and resistant bacterial and fungal pathogens. Surrogate viruses had an initial concentration of ~1 × 108 mL−1, and bacterial and fungal isolates had an initial concentration of ~1 × 106 mL−1 on Siliconee surfaces. After the application of VR or a comparator disinfectant, surfaces were tested for the reduction in microbial loads after 30 s and 5 min wet exposures, and after a 24 h dry residue exposure. Sterile deionized water was used as a control. The VR at a concentration of 4.68% was superior to all comparator disinfectants against most pathogens in wet and dry testing. The VR at 7.8% concentration showed the highest pathogen-reduction rate among all comparator disinfectants when tested against all pathogens. Conclusions: Overall, the novel VR disinfectant was the most effective disinfectant in both wet and dry residue states against the range of tested pathogens. Significance and Impact of the Study: VR is a broadly effective disinfectant combination for use in high-risk settings, particularly those in which intervals between applications of disinfectant can be lengthy or inconsistent. [ABSTRACT FROM AUTHOR]

Objective: Antiseptics are widely used in wound management to prevent or treat wound infections, and have been shown to have antibiofilm efficacy. The objective of this study was to assess the effectiveness of a polyhexamethylene biguanide (PHMB)-containing wound cleansing and irrigation solution on model biofilm of pathogens known to cause wound infections compared with a number of other antimicrobial wound cleansing and irrigation solutions. Method: Staphylococcus aureus and Pseudomonas aeruginosa single-species biofilms were cultured using microtitre plate and Centers for Disease Control and Prevention (CDC) biofilm reactor methods. Following a 24-hour incubation period, the biofilms were rinsed to remove planktonic microorganisms and then challenged with wound cleansing and irrigation solutions. Following incubation of the biofilms with a variety of concentrations of the test solutions (50%, 75% or 100%) for 20, 30, 40, 50 or 60 minutes, remaining viable organisms from the treated biofilms were quantified. Results: The six antimicrobial wound cleansing and irrigation solutions used were all effective in eradicating Staphylococcus aureus biofilm bacteria in both test models. However, the results were more variable for the more tolerant Pseudomonas aeruginosa biofilm. Only one of the six solutions (sea salt and oxychlorite/NaOCl-containing solution) was able to eradicate Pseudomonas aeruginosa biofilm using the microtitre plate assay. Of the six solutions, three (a solution containing PHMB and poloxamer 188 surfactant, a solution containing hypochlorous acid (HOCl) and a solution containing NaOCl/HOCl) showed increasing levels of eradication of Pseudomonas aeruginosa biofilm microorganisms with increasing concentration and exposure time. Using the CDC biofilm reactor model, all six cleansing and irrigation solutions, except for the solution containing HOCl, were able to eradicate Pseudomonas aeruginosa biofilms such that no viable microorganisms were recovered. Conclusion: This study demonstrated that a PHMB-containing wound cleansing and irrigation solution was as effective as other antimicrobial wound irrigation solutions for antibiofilm efficacy. Together with the low toxicity, good safety profile and absence of any reported acquisition of bacterial resistance to PHMB, the antibiofilm effectiveness data support the alignment of this cleansing and irrigation solution with antimicrobial stewardship (AMS) strategies. [ABSTRACT FROM AUTHOR]

Healthcare workers in the hospital environment are at risk of infection and body fluids such as saliva, bacterial contamination, oral bacteria, etc. directly or indirectly exacerbate this issue. These bio-contaminants, when adhered to hospital linens and clothing, grow substantially, as conventional textile products provide a favorable medium for bacterial and viral growth, adding to the risk of transmitting infectious diseases in the hospital environment. Textiles with durable antimicrobial properties prevent microbial colonization on their surfaces and help contain the spread of pathogens. This longitudinal study aimed to investigate the antimicrobial performance of PHMB-treated healthcare uniforms during prolonged usage and repetitive laundry cycles in a hospital environment. The PHMB-treated healthcare uniforms displayed non-specific antimicrobial properties and remained efficient (>99% against S. aureus and K. pneumoniae) after use for 5 months. With the fact that no antimicrobial resistance was reported towards PHMB, the presented PHMB-treated uniform may reduce infection in hospital settings by minimizing the acquisition, retention, and transmission of infectious diseases on textile products. [ABSTRACT FROM AUTHOR]

Background:chronic apical periodontitis is a common pathology in dentistry, especially in endodontics. It is necessary to systematize data concerning commonly used irrigation solutions. The development of new protocols for endodontic treatment is a very promising direction. The use of a polyhexanide-based antiseptic can positively affect the results of endodontic treatment. Methods: the review was carried out involving the search for English language research and meta-analyses in the Google Scholar and PubMed databases. Results: the number of literary sources that were identified during the literature review is 180. After excluding publications that did not match the search criteria, the total number of articles included in the systematic review was determined to be 68. Conclusions: polyhexanide is a promising solution for infected root canal irrigation. The antibacterial activity of this substance is suitable for the elimination of pathogens responsible for the appearance of apical periodontitis. [ABSTRACT FROM AUTHOR]

The presented article describes the method of synthesizing new ionic liquid based on a biguanide cation and a tiocyanate or benzoate anion with antimicrobial properties. The structure of obtained new ionic liquid was confirmed by infrared spectroscopy. Additionally, the article describes a simple method of producing an antibacterial textile materials and PE-based film with the addition of an ionic liquid. [ABSTRACT FROM AUTHOR]

Background: Progressively increasing number of eye surgeries forces the development of simple-to-use, effective methods to reduce the risk of postoperative endophthalmitis. We wondered whether the eyelid margin wipes containing 0,1% polyhexamethylene biguanide (PHMB) (HexaClean, VERCO, Poland) influence the reduction of bacterial flora localized in the conjunctival sac and whether it can be used for prophylaxis before the cataract surgery. MATERIAL AND METHODS: 95 patients before the cataract surgery were included in the study. The conjunctival swab was collected from patients twice -- before using eye wipes and after 5 days of eye wipes usage. The swabs were plated on microbiological enriched media and incubated under aerobic and microaerophilic conditions for 24-48 hours at 35°C ± 2°C. Then the identification of microorganisms was carried out using classic microbiological methods and tests. RESULTS: Bacterial strains were isolated from the conjunctival sac in 84% of patients before using the eye wipes. The largest group of isolated pathogens was Gram-positive cocci, and these were mainly methicillin-sensitive and methicillin-resistant coagulase-negative staphylococci, which accounted for 72% of isolated strains. When the eye wipes were used, the bacterial flora was eliminated from the conjunctival sac in 54% of patients. A reduction in isolated strains and decreased variety of bacteria was observed in another 22% of patients. CONCLUSION: These results indicate that the application of eyelid wipes with polyhexanide reduces a significant amount of the conjunctival sac microbiota, which may prevent inflammation after cataract surgery. [ABSTRACT FROM AUTHOR]

A wound offers an ideal environment for the growth and proliferation of a variety of microorganisms which, in some cases, may lead to localised or even systemic infections that can be catastrophic for the patient; the development of biofilms exacerbates these infections. Over the past few decades, there has been a progressive development of antimicrobial resistance (AMR) in microorganisms across the board in healthcare sectors. Such resistant microorganisms have arisen primarily due to the misuse and overuse of antimicrobial treatments, and the subsequent ability of microorganisms to rapidly change and mutate as a defence mechanism against treatment (e.g., antibiotics). These resistant microorganisms are now at such a level that they are of grave concern to the World Health Organization (WHO), and are one of the leading causes of illness and mortality in the 21st century. Treatment of such infections becomes imperative but presents a significant challenge for the clinician in that treatment must be effective but not add to the development of new microbes with AMR. The strategy of antimicrobial stewardship (AMS) has stemmed from the need to counteract these resistant microorganisms and requires that current antimicrobial treatments be used wisely to prevent amplification of AMR. It also requires new, improved or alternative methods of treatment that will not worsen the situation. Thus, any antimicrobial treatment should be effective while not causing further development of resistance. Some antiseptics fall into this category and, in particular, polyhexamethylene hydrochloride biguanide (PHMB) has certain characteristics that make it an ideal solution to this problem of AMR, specifically within wound care applications. PHMB is a broad-spectrum antimicrobial that kills bacteria, fungi, parasites and certain viruses with a high therapeutic index, and is widely used in clinics, homes and industry. It has been used for many years and has not been shown to cause development of resistance; it is safe (non-cytotoxic), not causing damage to newly growing wound tissue. Importantly there is substantial evidence for its effective use in wound care applications, providing a sound basis for evidence-based practice. This review presents the evidence for the use of PHMB treatments in wound care and its alignment with AMS for the prevention and treatment of wound infection. [ABSTRACT FROM AUTHOR]

Wound infection is a common complication of chronic wounds. It can impair healing, which may not occur without external help. Antimicrobial dressings (AMDs) are a type of external help to infected chronic wounds. In this study, highly porous membranes made of only chitosan and containing the antiseptic polyhexanide (poly(hexamethylene biguanide); PHMB) were prepared by cryogelation, aiming to be used in AMDs. These membranes exhibited a water swelling capacity of 748%, a water drop penetration time of 11 s in a dry membrane and a water vapor transmission rate of 34,400 g H2O/m2/24 h when in contact with water. The best drug loading method involved simultaneous loading by soaking in a PHMB solution and sterilization by autoclaving, resulting in sterilized, drug-loaded membranes. When these membranes and a commercial PHMB-releasing AMD were assayed under the same conditions, albeit far from the in vivo conditions, their drug release kinetics were comparable, releasing PHMB for ca. 6 and 4 h, respectively. These membranes exhibited high antibacterial activity against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa, which are bacterial species commonly found in infected wounds and blood clotting activity. The obtained results suggest that these membranes may have potential for use in the development of AMDs.

Highly sensitive and integrated optical multi-band CO2 sensors are significant at the shortwave infrared (SWIR) region and still lack research. A compact CO2 sensor composed of a Au-disk/TiO2-cylinder/Au-film metasurface coated by polyhexamethylene biguanide (PHMB) film, functioning at multi-band resonances as well as having high sensitivity to gas concentrations, is presented. It can be employed as a dual-band narrowband absorber, producing two strongly resonant modes at the SWIR region under a reflection-type framework of linearly polarized incidence. Moreover, the metasurface sensor possesses high refractive index sensitivity of 109.25 pm/ppm at around 1040 nm and 42.57 pm/ppm at around 1330 nm in the range of 200–600 ppm, which is suitable for detecting atmospheric CO2. Furthermore, the numerical results show that the sensitivity increases with a thicker PHMB film and optimizes at a thickness above 600 nm. The physical mechanism reveals that the higher order mode exhibits more extended near-field energy than the lower order mode, resulting in more sensitivity towards the surroundings. The design and results of our investigation show high-quality CO2 sensing performance which functions at dual spectrum bands in the SWIR region and is promising for integrated photonic applications. [ABSTRACT FROM AUTHOR]

In diabetic foot ulcers (DFUs), biofilm formation is a major challenge that promotes wound chronicity and delays healing. Antiseptics have been proposed to combat biofilms in the management of DFUs. However, there is limited evidence on the activity of these agents against biofilms, and there are questions as to which agents have the best efficiency. Here, we evaluated the antibiofilm activity of sodium hypochlorite, polyvinylpyrrolidoneIodine (PVPI), polyhexamethylenebiguanide (PHMB) and octenidine against Pseudomonas aeruginosa strains using static and dynamic systems in a chronic-wound-like medium (CWM) that mimics the chronic wound environment. Using Antibiofilmogram®, a technology assessing the ability of antiseptics to reduce the initial phase of biofilm formation, we observed the significant activity of antiseptics against biofilm formation by P. aeruginosa (at 1:40 to 1:8 dilutions). Moreover, 1:100 to 1:3 dilutions of the different antiseptics reduced mature biofilms formed after 72 h by 10-log, although higher concentrations were needed in CWM (1:40 to 1:2). Finally, in the BioFlux200TM model, after biofilm debridement, sodium hypochlorite and PHMB were the most effective antiseptics. In conclusion, our study showed that among the four antiseptics tested, sodium hypochlorite demonstrated the best antibiofilm activity against P. aeruginosa biofilms and represents an alternative in the management of DFUs. [ABSTRACT FROM AUTHOR]

The treatment of chronic wounds presents a major challenge in medical care. In particular, the effective treatment of bacterial infections that occur in the form of biofilms is of crucial importance. To develop successful antibiofilm strategies for chronic wound treatment, biofilm models are needed that resemble the in vivo situation, are easy to handle, standardizable, and where results are readily transferable to the clinical situation. We established two 3D biofilm models to distinguish the effectiveness of wound dressings on important microorganisms present in chronic wounds. The first 3D biofilm model contains Staphylococcus aureus, Escherichia coli, and Acinetobacter baumannii, while the second is based on Pseudomonas aeruginosa. Bacteria are cultivated in a nutrient-rich agar/gelatin mix, into which air bubbles are incorporated. This results in a mature biofilm growing in clusters similar to its organization in chronic wounds. The models are convenient to use, have low variability and are easy to establish in the laboratory. Treatment with polihexanide and silver-containing wound dressings showed that the models are very well suited for antimicrobial testing and that they can detect differences in the efficacy of antimicrobial substances. Therefore, these models present valuable tools in the development of effective antibiofilm strategies in chronic wounds. [ABSTRACT FROM AUTHOR]

Copyright of Magyar Nőorvosok Lapja is the property of Hungarian Society of Obsterics & Gynaecology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Objective: The primary aim of this research was to investigate the combination effect of polyhexamethylene biguanide (PHMB) and low-frequency contact ultrasonic debridement (LFCUD) on the bacterial load in hard-to-heal wounds in adults, compared with ultrasonic debridement alone. Secondary outcomes included wound healing, quality of life (QoL) and pain scores. Method: In this single-blinded, randomised, controlled trial participants were randomised to two groups. All participants received LFCUD weekly for six weeks, plus six weeks of weekly follow-up. The intervention group received an additional 15-minute topical application of PHMB post-LFCUD, at each dressing change and in a sustained dressing product. The control group received non-antimicrobial products and the wounds were cleansed with clean water or saline. Wound swabs were taken from all wounds for microbiological analysis at weeks 1, 3, 6 and 12. Results: A total of 50 participants took part. The intervention group (n=25) had a lower bacterial load at week 12 compared with the control group (n=25) (p<0.001). There was no difference in complete wound healing between the groups (p=0.47) or wound-related QoL (p=0.15). However, more wounds deteriorated in the control group (44%) compared with the intervention group (8%, p=0.01). A higher proportion of wounds reduced in size in the intervention group (61% versus 12%, p=0.019). Pain was lower in the intervention group at week six, compared with controls (p=0.04). Conclusion: LFCUD without the addition of an antimicrobial agent such as PHMB, cannot be recommended. Further research requires longer follow-up time and would benefit from being powered sufficiently to test the effects of multiple covariates. [ABSTRACT FROM AUTHOR]

In recent years, a rise in the number of contact lens users in the UK and worldwide coincided with an increased incidence of microbial keratitis. The aim of this study was to investigate the antimicrobial activities of polyhexamethylene guanidine (PHMG), polyaminopropyl biguanide (PAPB), and guazatine in comparison to the common contact lens disinfectant constituent, polyhexamethylene biguanide (PHMB). The study investigated these compounds against a broad range of organisms, including Acanthamoeba castellanii, Acanthamoeba polyphaga, Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans. This study demonstrated that PHMG, PAPB, and guazatine are equal in activity to PHMB against Acanthamoeba trophozoites and cysts. PHMG and PAPB are also equal in activity to PHMB against S. aureus and P. aeruginosa, whereas PHMG shows significantly better activity than PHMB against C. albicans (p < 0.001). To our knowledge, this is the first study to demonstrate the effectiveness of PHMB, PHMG, PAPB, and guazatine against Acanthamoeba and other ocular pathogens. As alternatives to PHMB, these compounds warrant further investigation for inclusion in contact lens solutions and for the treatment of keratitis. [ABSTRACT FROM AUTHOR]

Chronic wounds and their treatment present a significant burden to patients and healthcare systems alike, with their management further complicated by bacterial infection. Historically, antibiotics have been deployed to prevent and treat infections, but the emergence of bacterial antimicrobial resistance and the frequent development of biofilms within the wound area necessitates the identification of novel treatment strategies for use within infected chronic wounds. Here, several non-antibiotic compounds, polyhexamethylene biguanide (PHMB), curcumin, retinol, polysorbate 40, ethanol, and D-α-tocopheryl polyethylene glycol succinate 1000 (TPGS) were screened for their antibacterial and antibiofilm capabilities. The minimum inhibitory concentration (MIC) and crystal violet (CV) biofilm clearance against two bacteria frequently associated with infected chronic wounds, Staphylococcus aureus and Pseudomonas aeruginosa, were determined. PHMB was observed to have highly effective antibacterial activity against both bacteria, but its ability to disperse biofilms at MIC levels was variable. Meanwhile, TPGS had limited inhibitory activity but demonstrated potent antibiofilm properties. The subsequent combination of these two compounds in a formulation resulted in a synergistic enhancement of their capability to kill both S. aureus and P. aeruginosa and disperse their biofilms. Collectively, this work highlights the utility of combinatory approaches to the treatment of infected chronic wounds where bacterial colonization and biofilm formation remains significant issues.

Acanthamoeba , a free-living amoeba, is commonly found in various natural environments, such as rivers and soil, as well as in public baths, swimming pools, and sewers. Acanthamoeba can cause severe illness such as granulomatous amoebic encephalitis and Acanthamoeba keratitis (AK) in humans. AK, the most recognized disease, can cause permanent visual impairment or blindness by affecting the cornea. AK commonly affects contact lens wearers who neglect proper cleaning habits. The symptoms of AK include epithelial and stromal destruction, corneal infiltrate, and intense ocular pain, occasionally necessitating surgical removal of the entire eyeball. Current AK treatment involves the hourly application of eye drops containing polyhexamethylene biocide (PHMB). However, studies have revealed their ineffectiveness against drug-resistant strains. Acanthamoeba can form cysts as a survival mechanism in adverse environments, though the exact mechanism remains unknown. Our experiments revealed that sodium P-type ATPase (ACA1_065450) is closely linked to encystation. In addition, various encystation buffers, such as MgCl 2 or NaCl, induced the expression of P-type ATPase. Furthermore, we used ouabain, an ATPase inhibitor, to inhibit the Na+/K+ ion pump, consequently decreasing the encystation rate of Acanthamoeba. Our primary objective is to develop an advanced treatment for AK. We anticipate that the combination of ouabain and PHMB may serve as an effective therapeutic approach against AK in the future. [Display omitted] • The expression of the sodium P-type ATPase gene increase after encystation. • Ouabain inhibits encystation on A. castellanii. • Effect of a Combination drug treatment on A. castellanii. [ABSTRACT FROM AUTHOR]

This study aims to look for the best concentration of nanohydroxyapatite (NHA) and polyhexamethylene biguanide (PHMB) incorporated into glass ionomer cement (GIC) in accordance with ISO:9917-1 and evaluate its mechanical, antibacterial, biocompatible and microleakages properties. NHA was incorporated into Fuji Ⅱ GIC powder at 0–8.00 wt% concentration and specimens were prepared; the best concentration was sifted out according to ISO9917-1. Based on best NHA proportion, 0–0.80% PHMB was dispersed into powder and samples were respectively prepared. Mechanical properties include net setting time (ST), compressive strength (CS), microhardness (VNH), solubility and scanning electron microscopy (SEM) observation. Those met ISO standard were qualified to continue microleakage observation, antibacterial activity, and biocompatibility test. The results suggested that GIC/6%NHA/0.2% PHMB and GIC/6%NHA/0.4%PHMB showed great performances in mechanical, antibacterial, and microleakage improvements, and the cytotoxicity of modified GIC showed no statistical difference with pure GIC. [ABSTRACT FROM AUTHOR]

Bacterial infection remains a great challenge in wound healing, especially in chronic wounds. Multidrug‐resistant organisms are increasing in acute and chronic wound infections, which compromise the chance of therapeutics. Resistance to conventional antibiotics has created an urge to study new approach/system that can effectively control wound infection and enhance healing. Wound cover/dressing must exhibit biocompatibility and effectiveness in reducing bioburden at the wound site. Collagen, a natural biopolymer, possesses advantages over synthetic and other natural materials due to its unique biological properties. It can act as an excellent wound dressing and controlled drug delivery system. Currently, antiseptic agents such as silver, iodine, and polyhexamethylene biguanide (PHMB)‐incorporated scaffolds have become widely accepted in chronic wound healing. In this study, PHMB‐incorporated collagen scaffold has been prepared and characterized using Fourier transform infrared spectroscopy (FTIR), circular dichroism (CD), and differential scanning calorimetry (DSC), which showed retention of collagen nativity and integration of PHMB. The scanning electron microscopy (SEM) analysis revealed the porous structures of scaffolds. The cytotoxicity analysis showed PHMB is nontoxic at the concentration of 0.01% (wt/wt). The agar diffusion test and bacterial adhesion study demonstrated the effectiveness of PHMB‐incorporated collagen scaffold against both gram positive and negative strains. This study concludes that PHMB‐incorporated collagen scaffold could have the potential for infected wound healing. [ABSTRACT FROM AUTHOR]

Background:chronic apical periodontitis is a common pathology in dentistry, especially in endodontics. It is necessary to systematize data concerning commonly used irrigation solutions. The development of new protocols for endodontic treatment is a very promising direction. The use of a polyhexanide-based antiseptic can positively affect the results of endodontic treatment. Methods: the review was carried out involving the search for English language research and meta-analyses in the Google Scholar and PubMed databases. Results: the number of literary sources that were identified during the literature review is 180. After excluding publications that did not match the search criteria, the total number of articles included in the systematic review was determined to be 68. Conclusions: polyhexanide is a promising solution for infected root canal irrigation. The antibacterial activity of this substance is suitable for the elimination of pathogens responsible for the appearance of apical periodontitis.

The prevalence of chronic, non-healing skin wounds in the general population, most notably diabetic foot ulcers, venous leg ulcers and pressure ulcers, is approximately 2% and is expected to increase, driven mostly by the aging population and the steady rise in obesity and diabetes. Non-healing wounds often become infected, increasing the risk of life-threatening complications, which poses a significant socioeconomic burden. Aiming at the improved management of infected wounds, a variety of wound dressings that incorporate antimicrobials (AMDs), namely polyhexanide (poly(hexamethylene biguanide); PHMB), have been introduced in the wound-care market. However, many wound-care professionals agree that none of these wound dressings show comprehensive or optimal antimicrobial activity. This manuscript summarizes and discusses studies on PHMB-releasing membranes (PRMs) for wound dressings, detailing their preparation, physical properties that are relevant to the context of AMDs, drug loading and release, antibacterial activity, biocompatibility, wound-healing capacity, and clinical trials conducted. Some of these PRMs were able to improve wound healing in in vivo models, with no associated cytotoxicity, but significant differences in study design make it difficult to compare overall efficacies. It is hoped that this review, which includes, whenever available, international standards for testing AMDs, will provide a framework for future studies.

Highly sensitive and integrated optical multi-band CO2 sensors are significant at the shortwave infrared (SWIR) region and still lack research. A compact CO2 sensor composed of a Au-disk/TiO2-cylinder/Au-film metasurface coated by polyhexamethylene biguanide (PHMB) film, functioning at multi-band resonances as well as having high sensitivity to gas concentrations, is presented. It can be employed as a dual-band narrowband absorber, producing two strongly resonant modes at the SWIR region under a reflection-type framework of linearly polarized incidence. Moreover, the metasurface sensor possesses high refractive index sensitivity of 109.25 pm/ppm at around 1040 nm and 42.57 pm/ppm at around 1330 nm in the range of 200–600 ppm, which is suitable for detecting atmospheric CO2. Furthermore, the numerical results show that the sensitivity increases with a thicker PHMB film and optimizes at a thickness above 600 nm. The physical mechanism reveals that the higher order mode exhibits more extended near-field energy than the lower order mode, resulting in more sensitivity towards the surroundings. The design and results of our investigation show high-quality CO2 sensing performance which functions at dual spectrum bands in the SWIR region and is promising for integrated photonic applications.

The treatment of chronic wounds presents a major challenge in medical care. In particular, the effective treatment of bacterial infections that occur in the form of biofilms is of crucial importance. To develop successful antibiofilm strategies for chronic wound treatment, biofilm models are needed that resemble the in vivo situation, are easy to handle, standardizable, and where results are readily transferable to the clinical situation. We established two 3D biofilm models to distinguish the effectiveness of wound dressings on important microorganisms present in chronic wounds. The first 3D biofilm model contains Staphylococcus aureus, Escherichia coli, and Acinetobacter baumannii, while the second is based on Pseudomonas aeruginosa. Bacteria are cultivated in a nutrient-rich agar/gelatin mix, into which air bubbles are incorporated. This results in a mature biofilm growing in clusters similar to its organization in chronic wounds. The models are convenient to use, have low variability and are easy to establish in the laboratory. Treatment with polihexanide and silver-containing wound dressings showed that the models are very well suited for antimicrobial testing and that they can detect differences in the efficacy of antimicrobial substances. Therefore, these models present valuable tools in the development of effective antibiofilm strategies in chronic wounds.

The NCW2 gene was recently described as encoding a GPI-bounded protein that assists in the re-modelling of the Saccharomyces cerevisiae cell wall (CW) and in the repair of damage caused by the polyhexamethylene biguanide (PHMB) polymer to the cell wall. Its absence produces a re-organization of the CW structure that result in resistance to lysis by glucanase. Hence, the present study aimed to extend the analysis of the Ncw2 protein (Ncw2p) to determine its physiological role in the yeast cell surface. The results showed that Ncw2p is transported to the cell surface upon O-mannosylation mediated by the Pmt1p–Pmt2p enzyme complex. It co-localises with the yeast bud scars, a region in cell surface formed by chitin deposition. Once there, Ncw2p enables correct chitin/β-glucan structuring during the exponential growth. The increase in molecular mass by hyper-mannosylation coincides with the increasing in chitin deposition, and leads to glucanase resistance. Treatment of the yeast cells with PHMB produced the same biological effects observed for the passage from exponential to stationary growth phase. This might be a possible mechanism of yeast protection against cationic biocides. In conclusion, we propose that Ncw2p takes part in the mechanism involved in the control of cell surface rigidity by aiding on the linkage between chitin and glucan layers in the modelling of the cell wall during cell growth. [ABSTRACT FROM AUTHOR]

In recent years, a rise in the number of contact lens users in the UK and worldwide coincided with an increased incidence of microbial keratitis. The aim of this study was to investigate the antimicrobial activities of polyhexamethylene guanidine (PHMG), polyaminopropyl biguanide (PAPB), and guazatine in comparison to the common contact lens disinfectant constituent, polyhexamethylene biguanide (PHMB). The study investigated these compounds against a broad range of organisms, including Acanthamoeba castellanii, Acanthamoeba polyphaga, Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans. This study demonstrated that PHMG, PAPB, and guazatine are equal in activity to PHMB against Acanthamoeba trophozoites and cysts. PHMG and PAPB are also equal in activity to PHMB against S. aureus and P. aeruginosa, whereas PHMG shows significantly better activity than PHMB against C. albicans (p < 0.001). To our knowledge, this is the first study to demonstrate the effectiveness of PHMB, PHMG, PAPB, and guazatine against Acanthamoeba and other ocular pathogens. As alternatives to PHMB, these compounds warrant further investigation for inclusion in contact lens solutions and for the treatment of keratitis.

The treatment of acute and chronic infected wounds with residing biofilm still poses a major challenge in medical care. Interactions of antimicrobial dressings with bacterial load, biofilm matrix and the overall protein-rich wound microenvironment remain insufficiently studied. This analysis aimed to extend the investigation on the efficacy of a variety of antimicrobial dressings using an in vitro biofilm model (lhBIOM) mimicking the specific biofilm-environment in human wounds. Four wound dressings containing polyhexanide (PHMB), octendine di-hydrochloride (OCT), cadexomer-iodine (C-IOD) or ionic silver (AG) were compared regarding their antimicrobial efficacy. Quantitative analysis was performed using a quantitative suspension method, separately assessing remaining microbial counts within the solid biofilm as well as the dressing eluate (representing the absorbed wound exudate). Dressing performance was tested against P. aeruginosa biofilms over the course of 6 days. Scanning electron microscopy (SEM) was used to obtain qualitative visualization on changes in biofilm structure. C-IOD demonstrated superior bacterial reduction. In comparison it was the only dressing achieving a significant reduction of more than 7 log10 steps within 3 days. Neither the OCT- nor the AG-containing dressing exerted a distinct and sustained antimicrobial effect. PHMB achieved a non-significant microbicidal effect (1.71 ± 0.31 log10 steps) at day 1. Over the remaining course (6 days) it demonstrated a significant microbistatic effect compared to OCT, AG and the control. Quantitative results in the dressing eluate correlate with those of the solid biofilm model. Overall, AG- and OCT-containing dressings did not achieve the expected anti-biofilm efficacy, while C-IOD performed best. Chemical interaction with the biofilms extrapolymeric substance (EPS), visualized in the SEM, and dressing configuration (agent concentration and release pattern) are suspected to be responsible. The unexpected low and diverse results of the tested antimicrobial dressings indicate a necessity to rethink non-debridement anti-biofilm therapy. Focussing on the combination of biofilm-disruptive (for EPS structure) and antimicrobial (for residing microorganisms) features, as with C-IOD, using dehydration and iodine, appears reasonably complementary and an optimal solution, as suggested by the here presented in vitro data.

The treatment of acute and chronic infected wounds with residing biofilm still poses a major challenge in medical care. Interactions of antimicrobial dressings with bacterial load, biofilm matrix and the overall protein-rich wound microenvironment remain insufficiently studied. This analysis aimed to extend the investigation on the efficacy of a variety of antimicrobial dressings using an in vitro biofilm model (lhBIOM) mimicking the specific biofilm-environment in human wounds. Four wound dressings containing polyhexanide (PHMB), octendine di-hydrochloride (OCT), cadexomer-iodine (C-IOD) or ionic silver (AG) were compared regarding their antimicrobial efficacy. Quantitative analysis was performed using a quantitative suspension method, separately assessing remaining microbial counts within the solid biofilm as well as the dressing eluate (representing the absorbed wound exudate). Dressing performance was tested against P. aeruginosa biofilms over the course of 6 days. Scanning electron microscopy (SEM) was used to obtain qualitative visualization on changes in biofilm structure. C-IOD demonstrated superior bacterial reduction. In comparison it was the only dressing achieving a significant reduction of more than 7 log10 steps within 3 days. Neither the OCT- nor the AG-containing dressing exerted a distinct and sustained antimicrobial effect. PHMB achieved a non-significant microbicidal effect (1.71 ± 0.31 log10 steps) at day 1. Over the remaining course (6 days) it demonstrated a significant microbistatic effect compared to OCT, AG and the control. Quantitative results in the dressing eluate correlate with those of the solid biofilm model. Overall, AG- and OCT-containing dressings did not achieve the expected anti-biofilm efficacy, while C-IOD performed best. Chemical interaction with the biofilms extrapolymeric substance (EPS), visualized in the SEM, and dressing configuration (agent concentration and release pattern) are suspected to be responsible. The unexpected low and diverse results of the tested antimicrobial dressings indicate a necessity to rethink non-debridement anti-biofilm therapy. Focussing on the combination of biofilm-disruptive (for EPS structure) and antimicrobial (for residing microorganisms) features, as with C-IOD, using dehydration and iodine, appears reasonably complementary and an optimal solution, as suggested by the here presented in vitro data. [ABSTRACT FROM AUTHOR]

Human papilloma virus (HPV) infection and its progression still represent a great medical challenge worldwide. Clinical evidence has demonstrated the beneficial effects of polyhexamethylene biguanide (PHMB) on HPV clinical manifestations; however, evidence of the effect of this molecule on HPV viral load is still lacking. In this in vitro study, 13 ThinPrep Papanicolaou (Pap) tests were treated with a PHMB solution (0.10 g/100 mL) for 2 h. We observed no cytological changes but a significant reduction in the viral load of high-risk (HR) HPV after PHMB treatment, also revealing a dose-dependent antiviral effect. In addition, by stratifying the obtained results according to HR-HPV genotype, we observed a significant reduction in the viral load of HPV 16, P2 (56, 59, 66), 31, and P3 (35, 39, 68) and a strong decrease in the viral load of HPV 45, 52, and P1 (33, 58). Overall, 85% of the analyzed cervical cell samples exhibited an improvement in HPV viral load after PHMB exposure, while only 15% remain unchanged. For the first time, the data from this pilot study support the activity of PHMB on a specific phase of the HPV viral lifecycle, the one regarding the newly generated virions, reducing viral load and thus blocking the infection of other cervical cells.

Polyhexamethylene biguanide (PHMB) is one of the many antiseptics available in the medicine. It stands out from the others with its numerous advantages. It has a low toxicity factor, chemical stability, and bactericidal effect on most microorganisms. PHMB is used in many areas of medicine, veterinary medicine, gastronomy, and industry. The application of polyhexanide in the treatment of chronic wounds allows for fast regeneration and reduced time of wound treatment and hospitalization. According to the Recommendations of the Polish Wound Treatment Society, PHMB is recommended in treatment of critically colonized wounds, wounds at risk infection, burns, and decontamination of acute and chronic wounds, and as second choice in infected wounds. DOI: http://dx.doi.org/10.5281/zenodo.3956819

OBJECTIVE: Human papillomavirus (HPV) persistent infections of genital tract are strongly related to the development of genital warts and cellular transformation. These infections lead to different type of anogenital cancers, including cervical, vulvar and vaginal. Current therapeutic treatments of genital warts include surgical removal, physician-applied and patient-applied treatments. Most of these treatments aim to remove the wart, with low effect on virus infectivity. Therefore, recurrence rate represents a significant issue that has not been yet addressed. Moreover, adverse events and patient discomfort hamper the potential of these treatments. The aim of our study was to present a protocol proposal for the treatment of primary and recurrent genital warts based on Coriolus-MRL and polyhexamethylene biguanide application (PHMB). PATIENTS AND METHODS: 42 Patients with primary (15 patients) and recurrent (27 patients) genital warts were treated with the immunostimulator Coriolus-MRL and PHMB solution. Coriolus-MRL (Mycology Research Laboratories Ltd, Luton, Bedfordshire, United Kingdom) was administered as 2 tablets, 3 times per day, for six months while PHMB-gynecological solution, a mono-dose gynecological liquid-gel, was prepared and self-administered by patients before bedtime, every four days for twenty days and, afterward, every twenty days for the following six months. The control group was treated only with Coriolus-MRL, 2 tablets, 3 times per day, for six months. All patients with recurrent genital warts were previously treated with podophyllin local therapy. RESULTS: We have found that the combined treatment of PHMB solution and Coriolus-MRL induced an immediate disappearance and clearance of HPV infection lesions, speeding up the warts healing in comparison to the control, with a total regression of these within the first month for treated group while the control group has reached the same effect after 6 months. CONCLUSIONS: These results have demonstrated that combined therapy with Coriolus-MRL and PHMB solution provide positive outcomes in cases of primary or recurrent genital warts.

Dogs are the main reservoir for Leishmania infantum, manifesting from a subclinical to a fatal disease. Limited treatments are available, although new antiparasitics and immunomodulators are pursued. Polyhexamethylene biguanide (PHMB) has a broad antimicrobial spectrum, including antiparasitic activity. Here, we evaluated the potential for Toll-like receptor agonists (TLRa) and PHMB alone, and as polyplex nanoparticles containing PHMB and TLR4 or TLR9 agonists, to selectively kill L. infantum. Susceptibility of L. infantum promastigotes to PHMB, miltefosine, and allopurinol was performed, and the half-maximum inhibitory concentrations (IC50) were determined. Then, DH-82 cells were infected and treated with PHMB alone or combined with TLR4a (MPLA-SM) or TLR9a (CpG ODNs) and allopurinol alone. The IC50 values of L. infantum promastigotes were PHMB (1.495 µM), miltefosine (9.455 µM), and allopurinol (0.124 µM). After infection, treated DH-82 cells displayed a lower percentage (p = 0.0316), intensity (p = 0.0002), and index of infection (p = 0.0022) when compared to non-treated cells. PHMB induced lower percentage of infection alone (p = 0.043), in combination with TLR9a (p = 0.043), and with TLR4a (p = 0.0213). Supernatants were collected and used to measure TNF-α and IL-6 levels. Increased TNF-α was observed after PHMB plus TLR4a, relative to uninfected and infected untreated macrophages (p = 0.043). PHMB combined with TLR4a shows promise as a potential anti-L. infantum drug combination, as well as inducer of proinflammatory response, as demonstrated by decreased infection and increased TNF-α production. [ABSTRACT FROM AUTHOR]

Polyhexamethylene biguanide (PHMB) is one of the many antiseptics available in the medicine. It stands out from the others with its numerous advantages. It has a low toxicity factor, chemical stability, and bactericidal effect on most microorganisms. PHMB is used in many areas of medicine, veterinary medicine, gastronomy, and industry. The application of polyhexanide in the treatment of chronic wounds allows for fast regeneration and reduced time of wound treatment and hospitalization. According to the Recommendations of the Polish Wound Treatment Society, PHMB is recommended in treatment of critically colonized wounds, wounds at risk infection, burns, and decontamination of acute and chronic wounds, and as second choice in infected wounds. [ABSTRACT FROM AUTHOR]

Copyright of Polish Journal of Wound Management / Leczenie Ran is the property of Evereth Publishing Ltd. and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Objective: The burden of wound care within the NHS is estimated at a cost of £5.3 billion per year and is set to rise annually by 30%. This case series describes the results of using polyhexanide (PHMB) and betaine wound irrigation solution and gels (Prontosan, B.Braun Medical Ltd., UK) across the UK in hard-to-heal (also described as chronic) wounds up to 20 years' duration, with an observation period of greater than one month. Over half of the hard-to-heal wounds were healed and vast improvements to all other wounds were observed. Improvements to wound bed condition were reported as early as two days after commencing initial treatment, with decreases in malodour, exudate, slough and pain reported across the case series. In addition to wound bed improvements, a reduction in dressing change frequency of 55% was observed in hard-to-heal wounds under the new treatment regime. [ABSTRACT FROM AUTHOR]

Poly(hexamethylenebicyanoguanide-hexamethylenediamine) hydrochloride (PHMB) is a biocide with a broad spectrum of antibacterial activity. Its use as a disinfectant and preservative in consumer products results in human exposure to PHMB. Toxicity studies on PHMB mainly focus on systemic toxicity or skin irritation; however, its effects on developmental neurotoxicity (DNT) and the underlying mechanisms are poorly understood. In this study, the DNT effects of PHMB were evaluated using IMR-32 and SH-SY5Y cell lines and zebrafish. In both cell lines, PHMB concentrations ≥ 10 µM reduced neurite outgrowth, and cytotoxicity was observed at concentrations up to 40 µM. PHMB regulated expression of neurodevelopmental genes and induced reactive oxygen species (ROS) production and mitochondrial dysfunction. Treatment with N-acetylcysteine reversed the toxic effects of PHMB. Toxicity tests on zebrafish embryos showed that PHMB reduced viability and heart rate and caused irregular hatching. PHMB concentrations of 1–4 µM reduced the width of the brain and spinal cord of transgenic zebrafish and attenuated myelination processes. Furthermore, PHMB modulated expression of neurodevelopmental genes in zebrafish and induced ROS accumulation. These results suggested that PHMB exerted DNT effects in vitro and in vivo through a ROS-dependent mechanism, highlighting the risk of PHMB exposure. [Display omitted] • Developmental neurotoxic effects of PHMB were tested using neuronal cells and zebrafish models. • PHMB attenuated the differentiation of neuron in neuronal cell lines. • PHMB reduced embryo viability, hatching, and neuronal development in zebrafish. • Expression of neurodevelopmental genes and ROS accumulation were regulated by PHMB. • N-acetylcysteine reversed the observed toxic effects of PHMB. [ABSTRACT FROM AUTHOR]