Search

Semiconductor emitter can possibly achieve sharp cutoff wavelength due to its intrinsic bandgap absorption and almost zero sub-bandgap emission without doping. A germanium wafer based selective emitter with front-side antireflection and backside metal coating is studied here for thermophotovoltaic (TPV) energy conversion. Optical simulation predicts the spectral emittance above 0.9 in the wavelengths from 1 to 1.85 um and below 0.2 in the sub-bandgap range with sharp cutoff around the bandgap, indicating superior spectral selectivity behavior. This is confirmed by excellent agreement with indirectly measured spectral emittance of the fabricated Ge-based selective emitter sample. Furthermore, the TPV efficiency by paring the Ge-based selective emitter with a GaSb cell is theoretically analyzed at different temperatures. This work will facilitate the development of the semiconductor-based selective emitters for enhancing TPV performance.

This work theoretically explores a spectrally selective TPV cell based on an asymmetric Fabry-Perot resonance cavity structure with sub-100-nm GaSb layer. The simulated spectral property of the ultrathin nanophotonic cell structure exhibits a high absorption peak above the bandgap due to the interference effect with electromagnetic field enhanced inside the GaSb layer between top and bottom silver electrodes, while the sub-bandgap absorption is as low as a few percent because of high reflectivity of the metal. An absorption enhancement nearly 20 times at particular frequency above bandgap is achieved within the sub-100-nm GaSb layer with the nanophotonic cell structure compared to the free-standing one. Besides, a thin layer of MoOx is incorporated into the metafilm cell structure as a hole transport layer to consider the charge collection in practice. With rigorous optoelectronic analysis by considering both radiative and nonradiative recombinations (Shockley-Reed-Hall and Auger), the nanophotonic cell is predicted to achieve a TPV efficiency of 22.8% and output power of 0.62 W/cm2 with a black emitter at 1500 K due to spectrally enhanced in-band absorption and low sub-bandgap absorption. With an ideal selective emitter which is hard to achieve in practice along with thermal stability concerns, the efficiency can be further improved to 28% by eliminating sub-bandgap photons. The proposed spectrally selective nanophotonic metafilm cell could be a viable route to achieve high-efficiency and low-cost TPV energy conversion.

The performance of a near-field thermophotovoltaic system with a tandem-cell structure composed of thin-film p-doped GaSb and n-doped InAs sub-cells on a gold backside reflector is theoretically investigated. The temperatures of the Ga-doped ZnO emitter and the tandem cells are set as 1800 K and 300 K, while the thicknesses of GaSb and InAs sub-cells are considered as 1.5um and 0.5um, respectively. Fluctuational electrodynamics along with the multilayer dyadic Green's function is used to study near-field radiative heat transfer with the consideration of photon chemical potential, whereas radiative recombination and nonradiative Auger recombination are taken into account for evaluating the electrical performance of the tandem cells. At a vacuum gap of 50 nm, it is found that the tandem cells with independent charge collections achieve electrical power output 468.8 kW/m2 at a conversion efficiency of 41%, generating relatively 87% (or 21%) more power with about absolute 5% (or 10%) higher efficiency than the single GaSb (or InAs) cell of the same 2-um thickness. The physical mechanism of near-field spectral heat transfer is elucidated with energy transmission coefficient, while the current-voltage characteristics of sub-cells are discussed in detail. This work will pave the way to enhance near-field thermophotovoltaic energy conversion performance with tandem or multi-junction cells.

Concentrating solar power, particularly parabolic trough system with solar concentrations less than 50, requires spectrally selective solar absorbers that are thermally stable at high temperatures of 400degC above to achieve high efficiency. In this work, the solar-thermal performance of a selective multilayer metafilm absorber is characterized along with a black absorber for comparison by a lab-scale experimental setup that measures the steady-state absorber temperature under multiple solar concentrations. Heat transfer analysis is employed to elucidate different heat transfer modes and validate the solar-thermal experiment. Due to the superior spectral selectivity and excellent thermal stability, the metafilm absorber deposited on the cost-effective stainless steel foil could achieve the solar-thermal efficiency 57% at a steady-state temperature of 371degC under 10 suns during the lab-scale experiment with losses, while a highest efficiency of 83% was projected under the same conditions for practical solar thermal applications. The results here will facilitate the research and development of novel solar materials for high-efficiency solar thermal energy conversion.