Search

Objective To assess which radiological alignment parameters are associated with a satisfactory long-term clinical outcome after performing lumbar spinal fusion for treating degenerative spondylolisthesis. Methods This single-center prospective study assessed the relation between radiological alignment parameters measured on standing lateral lumbar spine radiographs and the patient-reported outcome using four different questionnaires (COMI, EQ-5D, ODI and VAS) as primary outcome measures (level of evidence: II). The following spinopelvic alignment parameters were used: gliding angle, sacral inclination, anterior displacement, sagittal rotation, lumbar lordosis, sacral slope, pelvic tilt and pelvic incidence. Furthermore, the length of stay and perioperative complications were documented. Only cases from 2013 to 2015 of low-grade degenerative lumbar spondylolisthesis (Meyerding grades I and II) were considered. The patients underwent open posterior lumbar fusion surgery by pedicle screw instrumentation and cage insertion. The operative technique was either a posterior lumbar interbody fusion (PLIF) or a transforaminal lumbar interbody fusion (TLIF) performed by three different senior orthopedic surgeons. Exclusion criteria were spine fractures, minimally invasive techniques, underlying malignant diseases or acute infections, previous or multisegmental spine surgery as well as preoperative neurologic impairment. Of 89 initially contacted patients, 17 patients were included for data analysis (11 males, six females). Results The data of 17 patients after mono- or bisegmental lumbar fusion surgery to treat low-grade lumbar spondylolisthesis and with a follow-up time of least 72 months were analyzed. The mean age was 66.7 +/- 11.3 years. In terms of complications two dural tears and one intraoperative bleeding occurred. The average body mass index (BMI) was 27.6 +/- 4.4 kg/m(2) and the average inpatient length of stay was 12.9 +/- 3.8 days (range: 8-21). The long-term clin

Bisphenol A (BPA), which is contained in numerous plastic products, is known to act as an endocrine-disruptive, toxic, and carcinogenic chemical. This experimental series sought to determine the influence of BPA exposure on the femoral bone architecture and biomechanical properties of male and female Wistar rats. BPA was applied subcutaneously by using osmotic pumps. After 12 weeks, the bones were analyzed by micro-computed tomography (micro-CT) and a three-point bending test. Comparing the female low- and high-dose groups, a significantly greater marrow area (p = 0.047) was identified in the group exposed to a higher BPA concentration. In addition, the trabecular number tended to be higher in the female high-dose group when compared to the low-dose group (p > 0.05). The area moment of inertia also tended to be higher in the male high-dose group when compared to the male low-dose group (p > 0.05). Considering our results, BPA-related effects on the bone morphology in female Wistar rats are osteoanabolic after high-dose exposure, while, in male rats, a tendency toward negative effects on the bone morphology in terms of a reduced cross-sectional cortical area and total area could be demonstrated.

Background Subaxial cervical spine injury especially in the elderly can be associated to severe complications and disability. Until today there is no consensus concerning the best operative treatment. A potential superiority of anterior or posterior fixation is the subject of controversial discussions. Objectives The aim of this study was to compare the outcome of anterior and posterior fixation after subaxial cervical spine trauma in the elderly focussing on the postoperative mortality. Material and Methods A retrospective cohort analysis was performed to analyse the data of 43 patients. Especially mortality data were collected. Results A total of 43 patients was identified. Anterior fixation was performed in 21 patients, posterior fixation was performed in 22 patients. There were no significant differences between these groups. Although statistical significance was not reached, a slightly higher mortality was found among patients undergoing anterior fixation (52,4 vs. 31,8%). Furthermore the male sex, a higher age, translation injuries, long duration of operation and hospitalisation as well as postoperative complications were slightly associated to a higher mortality. Conclusions Subaxial cervical spine trauma is associated to a high mortality in the elderly. Although neither anterior nor posterior fixation could show a significant superiority, every surgical decision making should be performed individually for each patient balancing the advantages and disadvantages of each method. Zusammenfassung Hintergrund Subaxiale Halswirbelsaulenverletzungen konnen besonders beim alten Patienten schwerwiegende Folgen haben. Weiterhin besteht jedoch Uneinigkeit hinsichtlich des optimalen Operationsverfahrens. Eine potenzielle uberlegenheit von ventralen oder dorsalen Strategien wird kontrovers diskutiert. Fragestellung Ziel dieser Studie war die Analyse des Outcomes nach ventralen und dorsalen Operationsverfahren im Rahmen subaxialer Halswirbelsaulenverletzungen beim alten Me

Purpose The atlantoaxial joint represents the most mobile joint complex within the spine, secured by ligaments and capsules. Integrity of the atlantoaxial joint is crucial with respect to the mobility of the head and the upper spine. Atlantoaxial rotatory dislocation is the most common type of injury within this joint in children and is characterized by a typical position of the head (cock robin position). Nevertheless, this type of injury is frequently overlooked. The purpose of the current study was threefold. First, the characteristics of the patients with atlantoaxial dislocation were identified. Next, we checked if the time to treatment did influence the type of treatment. Finally, we checked if the age of the child at the time of treatment influenced the type of treatment. Methods Forty-four children, who were treated consecutively due to atlantoaxial dislocation at a single spine center between September 1993 and October 2018, are analyzed retrospectively regarding age, sex, symptoms, etiology, time to diagnosis, time to treatment, and outcome. Results Forty-four children (30 girls, mean age 8.9 years) were included in the study. The cock robin head position was found in all of them, but neurological deficits were not found in any of them. In 21 patients, dislocation was caused by previous infection (Grisel's syndrome), whereas in 19 patients, dislocation was due to minor trauma. In 4 cases, etiology remained unknown. Mean time to sufficient treatment was 178 days. Eighteen patients received closed reduction and immobilization after 57 days at mean. Open reduction followed by temporary fixation was done in 12 patients after a mean time gap of 188 days. Bony atlantoaxial fusion was necessary in 14 children, who were diagnosed after 319 days on average. Invasiveness of treatment was dependent on the time delay between development of dislocation and treatment; a significant difference was found between invasiveness of treatment and time to treatment (Kruskal-Wal

Study Design: Four orthopedic spine surgeons measured the radiological parameters of pedicle screws in the cervical spine using a postoperative computed tomography (CT) scan. Purpose: This study analyzed the insertion angle of CT-navigated insertion of pedicle screws in the subaxial cervical spine and classified them according to their position. Overview of Literature: Overall, a pedicle transverse angle of 33.6 degrees-50.2 degrees with a mean angle of 45 degrees relative to the midline has been reported in the literature. Methods: The insertion angles of 87 pedicle screws inserted using CT-based navigation in the subaxial cervical spine were measured in the postoperative CT. The screw positioning was determined according to the modified Gertzbein and Robbins classification. Results: Total 89.3% (n=78) of the pedicle screws inserted using CT-based navigation showed good placement. The mean insertion angle of the pedicle screws that showed good positioning was 29.9 degrees +/- 9.9 degrees. The pedicle screws showing bad positioning had a mean insertion angle of 26.8 degrees +/- 10.5 degrees (p=0.157). The interobserver reliability showed a reliable measurement intraclass correlation coefficient: 0.994 (95% confidence interval, 0.992-0.996). Conclusions: The present results show that the insertion angle of the pedicle screws in the subaxial cervical spine was smaller than the actual pedicle transverse angle, as per the literature. One reason for this discrepancy could be that the navigation systems allow the insertion of cervical pedicle screws with a lower convergence.

Background: Screw loosening is a major complication following spondylodesis. While several modifications increase screw stability, some, such as screw augmentation, are associated with potential complications; new techniques are needed to minimize the risk of screw loosening without increasing complication rates. Methods: 13 fresh-frozen human lumbar vertebral bodies (L1 to L5) were dissected. In group 1 (n = 7), pedicle screws were implanted conventionally, while in group 2 (n = 6), the screws were positioned divergent in the sagittal pathway. Screw stability was tested under cyclic axial load; one testing-cycle included 1000 repetitions. The first cycle started with a load of 100 N while the load was increased by + 20 N in each following cycle until failure. Failure was defined by either a > 5 mm movement of the screw heads or triggering of the switch-off threshold. Findings: Average number of cycles until failure was increased in group 2 compared with group 1 (12,046 vs 9761 cycles), as was the average load to failure (Fmax 313 N vs 260 N). Overall, in group 2, the number of cycles until screw loosening or failure increased by 23% (p = 0.28), while the required force increased by 20% (p = 0.3). Statistically significant correlation between BMD and increased number of cycles completed as well as with increased load (p < 0.01) could be observed. Interpretation: The results demonstrate, that divergent screw-drift of pairs of screws in the sagittal plane tends to increase stability, especially in vertebral bodies with lower bone density. Moreover, we could demonstrate a correlation between BMD and stability of screw-fixation.

Background: Thoracolumbar spine fractures in multiple-injured patients are a common injury pattern. The appropriate timing for the surgical stabilization of vertebral fractures is still controversial. The purpose of this study was to analyse the impact of the timing of spinal surgery in multiple-injured patients both in general and in respect to spinal injury severity. Methods: A retrospective analysis of multiple-injured patients with an associated spinal trauma within the thoracic or lumbar spine (injury severity score (ISS) >16, age >16 years) was performed from January 2012 to December 2016 in two Level I trauma centres. Demographic data, circumstances of the accident, and ISS, as well as time to spinal surgery were documented. The evaluated outcome parameters were length of stay in the intensive care unit (ICU) (iLOS) and length of stay (LOS) in the hospital, duration of mechanical ventilation, onset of sepsis, and multiple organ dysfunction syndrome (MODS), as well as mortality. Statistical analysis was performed using SPSS. Results: A total of 113 multiple-injured patients with spinal stabilization and a complete dataset were included in the study. Of these, 71 multiple-injured patients (63%) presented with an AOSpine A-type spinal injury, whereas 42 (37%) had an AOSpine B-/C-type spinal injury. Forty-nine multiple-injured patients (43.4%) were surgically treated for their spinal injury within 24 h after trauma, and showed a significantly reduced length of stay in the ICU (7.31 vs. 14.56 days;p< 0.001) and hospital stay (23.85 vs. 33.95 days;p= 0.048), as well as a significantly reduced prevalence of sepsis compared to those surgically treated later than 24 h (3 vs. 7;p= 0.023). These adverse effects were even more pronounced in the case where cutoffs were increased to either 72 h or 96 h. Independent risk factors for a delay in spinal surgery were a higher ISS (p= 0.036), a thoracic spine injury (p= 0.001), an AOSpine A-type spinal injury (p= 0.048), and an

Background: Bicortical screw fixation is an established technique to increase screw strength in vertebral bodies, although it is associated with several complications, for example screw-loosening. Cement augmentation can increase stability of screw-fixation but can also cause various complications, such as cement-leakage or cement embolism. In this study, we tested a new, multicortical screw fixation technique in the sacrum. Methods: Four fresh-frozen sacrums were used. In group 1, standard screw insertion, with sagittal parallel and axial convergent screw-drive was performed. In group 2, the screw-drive of the first screw was similar to the screw-drive in group 1. In addition, a second screw was inserted descending into the intended hole in the head of the screw and at a stable angle. Therefore, the screws of the multiloc humerus nail-system (Synthes) were used. The specimens were connected to a testing-machine and underwent cyclic axial loading with an increase in the load after each completed stage. Findings: Multicortical screw fixation leads to a significant increase in the number of completed cycles and a significantly increased load until failure. Interpretation: Multicortical screw fixation in the sacrum offers a stronger attachment of the screws. In the future, multicortical implants, which fulfil the criteria demanded in spine surgery, can offer higher stability and may decrease the loosening rates of the implanted screws.

Traumatic atlantoaxial dislocation due to ligamentous and combined osseous injuries rarely occurs in adults. There are only few cases published in the literature. In this level 4 study, a cohort of nine consecutive patients suffering from traumatic atlantoaxial dislocation has been analyzed regarding morphology of injury, trauma mechanism, and outcome since 2007. Three types of those injuries have been found regarding direction of dislocation indicating the underlying ligamentous injuries as well as the accompanying grade of instability. Firstly, there was rotatory dislocation, if the alar ligaments were injured. Secondly, there occurred horizontal dislocation, when transverse atlantal ligament was damaged additionally. Thirdly, excessive ligamentous injury led to distraction of the atlantoaxial complex resulting in dissociation of the atlas against the axis. Additionally fractures of the atlas as well as of the odontoid process (type II or III according to Anderson/D'Alonzo) were diagnosed frequently. Atlantoaxial dislocation injuries, especially distraction injuries, offer a high risk for accompanied neurovascular disorders deserving reduction followed by surgical fixation. Only rotatory injuries leading to ligamentous damage solitarily can safely be successfully treated conservatively. Understanding of the injuries' morphology is essential, in order to set the correct diagnosis and to implicate the most advantageous treatment regime.

If conservative treatment of osteoporotic vertebral compression fractures fails, vertebro- or kyphoplasty is indicated. Usually, polymethylmethacrylate cement (PMMA) is applied coming along with many disadvantageous features. Aluminum-free glass-polyalkenoate cement (GPC) appears to be a benefit alternative material. This study aimed at comparing the mean stress values in human vertebrae after kyphoplasty with PMMA and GPC (IlluminOss) at hand of a finite element analysis. Three models were created performing kyphoplasty using PMMA or IlluminOss, respectively, at two native, human lumbar vertebrae (L4) while one remains intact. Finite element analysis was performed using CT-scans of every vertebra. Moreover the PMMA-treated vertebra was used as a model as analyses were executed using material data of PMMA and of GPC. The unimpaired, spongious bone showed potentials of 0.25 MPa maximally. After augmentation stress levels showed fivefold increase, rising from externally to internally, revealing stress peaks at the ventral border of the spinal canal. At central areas of cement 1 MPa is measured in both types of cement. Around these central areas the von Mises stress decreased about 25-50% (0.5-0.75 MPa). If workload of 500 N was applied, the stress appeared to be more centralized at the IlluminOss-model, similar to the unimpaired. Considering the endplates the GPC model also closely resembles the unimpaired. Comparing the PMMA-treated vertebral body and the GPC-simulation, there is an obvious difference. While the PMMA-treated model showed a central stress peak of 5 MPa, the GPC-simulation of the same vertebral body presents lower stress of 1.2-2.5 MPa. Finite element analysis showed that IlluminOss (GPC), used in kyphoplasty of vertebral bodies, creates lower level stress and strain compared to standardly used PMMA, leading to lower stress concentrations on the cranial and caudal vertebral surface especially. GPC appears to own advantageous biological and clinical rel

Background: We compared functional, electrophysiological and morphological parameters after SCI in two groups of rats Sprague Dawley (SD) rats with normal vision and blind rats from a SD-substrain Royal College of Surgeons (SD/RCS) who lose their photoreceptor cells after birth due to a genetic defect in the retinal pigment epithelium. For these animals skin-, intramuscular-, and tendon receptors are major available means to resolve spatial information. Objective: The purpose of this study was to check whether increased sensitivity in SD/RCS rats would promote an improved recovery after SCI. Methods: All rats were subjected to severe compression of the spinal cord at vertebra Th8, spinal cord segment Th10. Recovery of locomotion was analyzed at 1, 3, 6, 9, and 12 weeks after SCI using video recordings of beam walking and inclined ladder climbing. Five functional parameters were studied: foot-stepping angle (FSA), rump-height index (RHI) estimating paw placement and body weight support, respectively, number of correct ladder steps (CLS) assessing skilled hindlimb movements, the BBB-locomotor score and an established urinary bladder score (BS). Sensitivity tests were followed by electrophysiological measurement of M- and H-wave amplitudes from contractions of the plantar musculature after stimulation of the tibial nerve. The closing morphological measurements included lesion volume and expression of astro- and microglia below the lesion. Results: Numerical assessments of BBB, FSA, BS, lesion volume and GFAP-expression revealed no significant differences between both strains. However, compared to SD-rats, the blind SD/RCS animals significantly improved RHI and CLS by 6 - 12 weeks after SCI. To our surprise the withdrawal latencies in the blind SD/RCS rats were longer and the amplitudes of M- and H-waves lower. The expression of IBA1-immunoreactivity in the lumbar enlargement was lower than in the SD-animals. Conclusion: The longer withdrawal latencies suggest a decreas