Search

Background and Objectives : Third molar (wisdom tooth) extraction is one of the most common surgical procedures in oral and maxillofacial surgery. Traditional rotary instruments and burs have long been the standard tools for this procedure. However, recent advancements in surgical techniques, such as piezoelectric surgery, have gained popularity due to their purported advantages in terms of precision, safety, and postoperative outcomes. This systematic review aims to evaluate the efficacy, safety, and clinical outcomes of third molar surgery performed using burs versus piezoelectric surgery. Materials and Methods : This systematic review was conducted following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. A comprehensive literature search was performed using the PubMed, Scopus, Web of Science, and Cochrane databases to identify relevant studies published up until October 2024. Randomized controlled trials (RCTs), clinical trials, and comparative studies assessing third molar surgery using either burs or piezoelectric instruments were included. The primary outcomes evaluated were surgical time, postoperative pain, swelling, nerve damage, and healing time. The data extraction and quality assessment were performed independently by two reviewers using standardized tools, and any discrepancies were resolved by a third reviewer. Results : A total of five studies met the inclusion criteria, and the meta-analysis revealed that piezoelectric surgery resulted in significantly lower postoperative pain and swelling compared to traditional bur techniques ( p < 0.05). Additionally, the incidence of nerve injury was lower in the piezoelectric group, though the difference was not statistically significant. Surgical time was found to be longer with piezoelectric devices, but this was offset by improved healing outcomes and patient comfort. Conclusions : Piezoelectric surgery offers a less traumatic alternative to traditional burs for third molar extraction, with reduced postoperative morbidity and enhanced patient outcomes. Although the longer surgical duration may be a drawback, the overall benefits, particularly in terms of pain management and tissue preservation, support the adoption of piezoelectric techniques in clinical practice. Further high-quality randomized trials are recommended to strengthen the evidence base for these findings.

The purpose of the study is to evaluate the survival rate of pterygoid implants compared to implants placed in different maxilla area and to settle as an alternative solution for the rehabilitation of the posterior maxilla atrophy. Studies that were included for this systematic review were selected using different database of references: PubMed Medline, Lilacs and Cochrane Library. Other journal platforms were also used for the research. Five articles met the strict inclusion/exclusion criteria of the 180 articles founded. This systematic review was registered on Prospero (CRD42023409706) and followed PRISMA statement. A total of 768 implants placed presented 97.43 % with a peak of 100 % of survival rate. Follow-up period varies from a minimum of 1 year to a maximum of six years. Pterygoid implants could be a valid alternative in patients presenting a posterior maxilla atrophy, but results should be interpreted cautiously due to the difficulty of the surgical technique. Further studies in the future should be taken in consideration to confirm the success rate of pterygoid implants since there is only one prospective RCT, potentially incorporating modern technologies such as guided surgery or navigated surgery could be a solution for the success of pterygoid implants, minimizing the risk and less dependent on the operator., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Masson SAS. All rights reserved.)

Introduction: The aim of this study was to evaluate and compare the clinical efficacy of diode laser and ozone gas in the treatment of dentin hypersensitivity (DHS)., Methods: One hundred thirty-two teeth from 44 patients with moderate DHS were randomized into 3 groups according to a split-mouth design. In the diode laser group, the operator irradiated the superficial dentin exposed with an 808-nm wavelength and incremental power from 0.2 to 0.6 W with a 20-second interval. In the ozone gas group, the operator applied a high dose of ozone (32 g/m 3 ) for 30 seconds using a silicon cup. In the placebo group, no therapy was applied. The dentin sensitivity level was evaluated upon enrollment (T0), immediately after treatment (T1), 3 months post-treatment (T2), and 6 months post-treatment (T3) with a cold air blast challenge and tactile stimuli. The pain severity was quantified according to the visual analogue scale. The Wilcoxon signed rank test was used to scrutinize potential statistical disparities among the treatments. Statistical significance was predetermined at P < .05., Results: A significant decrease of DHS was observed in the ozone gas group and the `diode laser group immediately after treatment and after 3 and 6 months of the therapy. After 6 months from the therapy, the sensitivity values in the teeth treated with ozone gas remained statistically lower than those treated with diode lasers (P < .05)., Conclusions: A laser diode and ozone gas are both efficient as dentin sensitivity treatment. Ozone maintains an invariable effectiveness after 6 months., (Copyright © 2024 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Oral mucositis is a common and debilitating side effect induced by stem cell transplantation that is experienced by cancer patients undergoing chemotherapy or radiation therapy. This condition involves inflammation and ulceration of the oral mucosa, leading to pain, difficulty with eating and speaking, and an increased risk of infections. Mucositis not only compromises the quality of life for cancer patients, but also affects treatment outcomes and may necessitate dose reductions or treatment delays. This scientific article provides a comprehensive overview of mucositis. The purpose of this literature review with a meta-analysis is to evaluate the efficacy of laser therapy in treating post-transplant mucositis. Materials and methods : A search of the literature from 3 May 2023 was carried out on three online databases, PubMed, Scopus, and Web of Science. Only studies that treated patients with laser therapy were considered; only studies with the placebo-treated control group were considered. Review Manager version 5.2.8 (Cochrane Collaboration) was used for the pooled analysis. We measured the std. mean difference between the two groups (laser and placebo). Results : There were 230 papers included in this review. Two hundred twenty-seven were excluded. Furthermore, a manual search was performed. After the search phase, three articles were considered in the study. The overall effect showed differences in the degree of mucositis in the laser-treated patients compared with the placebo group. The meta-analysis shows a reduction in the degree of mucositis in the patients treated with laser therapy (std. mean difference -1.34 [-1.98; -0.98]; C.I. 95%). Conclusions : The application of laser therapy results in decreased severity of oral mucositis from radiation and chemotherapy. Our study shows that the application of low-level laser therapy in the treatment of transplant mucositis has excellent efficacy in relieving the symptoms and severity of mucositis.

Purpose: The aim of this systematic review was to evaluate the effectiveness of the socket shield technique (SST), an innovative surgical method introduced in 2010, for reducing buccal bone plate resorption., Methods: The review was conducted following the PRISMA guidelines. Clinical studies conducted in humans and investigating the SST were searched on PubMed (MEDLINE), Embase, Web of Knowledge, and Google Scholar in November and December 2021. The implant survival rate, percentage of complications, and clinical parameters (marginal bone loss [MBL], pink esthetic score [PES], and buccal bone plate resorption [BBPR]) were analyzed using the collected data., Results: The initial search resulted in 132 articles. After article screening, the full texts of 19 studies were read and 17 articles were finally included in the review. In total, 656 implants were installed with the SST. Nine of the 656 implants experienced failure, resulting in an implant survival rate of 98.6%. The percentage of complications was about 3.81%. The analysis of clinical parameters (MBL, PES, and BBPR), showed favorable results for the SST. The mean MBL in implants placed with the SST was 0.39±0.28 mm versus 1.00±0.55 mm in those placed without the SST. PES had a better outcome in the SST group, with an average of 12.08±1.18 versus 10.77±0.74. BBPR had more favorable results in implants placed with the SST (0.32±0.10 mm) than in implants placed with the standard technique (1.05±0.18 mm)., Conclusions: The SST could be considered beneficial for preserving the buccal bone plate. However, since only 7 of the included studies were long-term randomized controlled trials comparing the SST with the standard implant placement technique, the conclusions drawn from this systematic review should be interpreted with caution., Trial Registration: PROSPERO Identifier: CRD42020180637., Competing Interests: No potential conflict of interest relevant to this article was reported., (Copyright © 2023. Korean Academy of Periodontology.)

The aim of this study was to compare three different light-curing-units (LCUs) and determine their effectiveness in the adhesive cementation of indirect composite restorations when a light-curing resin cement is used. Two resin composites were selected: Enamel Plus HRI (Micerium) and AURA (SDI). Three thicknesses (3 mm, 4 mm and 5 mm) were produced and applied as overlays and underlays for each resin composite. A standardized composite layer was placed between underlay and overlay surfaces. Light curing of the resin-based luting composites was attained through the overlay filters using LCUs for different exposure times. All specimens were allocated to experimental groups according to the overlay thickness, curing unit and curing time. Vickers Hardness (VH) notches were carried out on each specimen. Data were statistically evaluated. The curing unit, curing time and overlay thickness were significant factors capable of influencing VH values. The results showed significantly decreased VH values with increasing specimen thickness ( p < 0.05). Significant differences in VH values were found amongst the LCUs for the various exposure times ( p < 0.05). According to the results, a time of cure shorter than 80 s (with a conventional quartz-tungsten-halogen LCU) or shorter than 40 s (with a high-power light-emitting diode (LED) LCU) is not recommended. The only subgroup achieving clinically acceptable VH values after a short 20 s curing time included the 3 mm-thick overlays made out of the AURA composite, when the high-power LED LCU unit was used (VH 51.0). Composite thickness has an intense effect on polymerization. In clinical practice, light-cured resin cements may result in insufficient polymerization for high thickness and inadequate times. High-intensity curing lights can attain the sufficient polymerization of resin cements through overlays in a significantly shorter time than conventional halogen light.

The aim of the present study was to in vitro evaluate the effect of dentin conditioning with hydroabrasion on the microtensile bond strengths of three adhesive systems, compared to the standard etch-and-rinse technique. Sixty extracted human third molars were collected, and their midcoronal occlusal dentin was used for the microtensile bond strength test. Teeth were randomly assigned to three groups according to the adhesive system used: ExciTE F DSC, ENA Bond, and Scotchbond Universal. Specimens from each group were further divided into four subgroups: control specimens were treated with standard adhesive procedures; hydroabraded (HA) specimens were subjected to preventive hydroabrasion with three different intensity levels. After bonding procedures, composite crowns were incrementally built up. After thermocycling, specimens were subsequently sectioned into 1 × 1 mm sticks, and microtensile bond strengths were measured. Data were statistically analyzed. Failure mode analysis was performed. There were no significant differences in terms of bond strength between standard adhesion protocols and adhesion with HA preconditionings. On the other hand, the type of adhesive used had a significant effect on the tensile bond strength. Subgroups treated with hydroabrasion at higher intensity showed a slightly increased frequency of cohesive fractures. In conclusion, hydroabrasion can be used for dentin cavity preparation or finishing, since it does not seem to affect the bonding effectiveness., Competing Interests: The authors declare that they have no conflicts of interest., (Copyright © 2021 Michele Tepedino et al.)

There is currently no consensus on the best way to remove adhesive remnants from teeth following debonding. The main objective of this study is to evaluate and compare the effectiveness of four adhesive resin removal (clean-up) techniques, performed with or without the use of an operative microscope. Forty human teeth were duplicated using an epoxy resin for impregnation. Brackets were bonded to teeth and debonded from teeth. Then, the samples were randomly divided into two equal groups-the naked eye group and the magnification group-and further subdivided into four equal subgroups, in order to compare the different techniques used for the clean-up. Each subgroup was formed of five natural teeth with the respective pre- and post-bonding replicas. Macro- and micro-analysis by means of a stereomicroscope and scanning electron microscopy evaluated, qualitatively and quantitatively, the adhesive remnant index and the damage index of the enamel. Overall, the magnification improved the removal of resins compared to the naked eye ( p < 0.001), and the use of magnification constantly reduced resin residual and surface damage. Enamel damage and adhesive residual from the clean-up procedures represent an ascertained risk in orthodontics. The use of a magnification system improves the quality of debonding and clean-up techniques in a significant way.

The aim of this study was to evaluate the efficiency of bovine and equine bone substitute materials used in sinus augmentation techniques. The research protocol was carried out using the PubMed database, including articles from October 2019 until February 2020 and those in English only. The search on PubMed (MED-LINE) was carried out with the following keywords: sinus augmentation OR sinus lift AND bovine bone graft OR equine bone matrix. The articles identified included randomised clinical trials, cross-sectional studies and case series. Outcomes were the percentage of newly formed bone, remaining graft particles and soft tissue in a follow-up at least of 5 months. The use of bovine bone graft (ABB) as a graft material in maxillary sinus elevation was evaluated in 9 studies. According to the quality assessment, 4 of the 9 studies were analysed and an arithmetic mean was performed showing the following results: newly formed bone (NFB 22.74%), residual grafts (RG 29.36%) and soft tissue percentage (SF 48.51%). The use of equine bone matrix (EBM) was assessed in four different studies including an RCT, a cross-sectional study and two case series; a mean percentage calculated by the extracted data of the four studies was estimated with newly formed bone (NFB 44.51%), residual grafts (RG 17.24%) and soft tissue percentage (SF 36.62%). EBM appears to be as effective as ABB for the maxillary sinus floor augmentation procedure., (Copyright 2019 Biolife Sas. www.biolifesas.org.)

Purpose: The purpose of this cross-sectional study is to evaluate the presence of any correlations between dysfunctions related to visual impairments and dental occlusion., Methods: The test group included 34 subjects (21 males and 13 females; mean age 11 ± 2 years) randomly selected with the following inclusion criteria: absence of any diagnosis for problems at visual level except those related to refractive defects, visual acuity of at least 1.0, absence of any syndrome or malformation in the craniofacial area, good general health, and absence of any systemic disease able to influence the vision or the craniofacial growth. They underwent visual clinical tests to evaluate the presence of fusional vergence defects and amplitude. Each patient underwent an orthodontic clinical exam and the occlusal molar relationship of each subject was recorded and considered as occlusal variable. A statistical analysis with Chi-Squared test was performed in order to analyze the associations between the visual defects and the occlusal variable., Results: A statistically significant association between the molar occlusal relationship and the occurrence of exodeviations was observed. The percentage of subjects presenting fusional amplitudes with convergence lower of the cut-off value was statistically significantly higher in the group of occlusal molar second class., Conclusions: The results obtained show that there is an association between occlusal second molar class and fusional vergence defects.

Background/purpose: This study compared maintenance of canal anatomy, occurrence of apical transportation, and working time observed after instrumentation with One Shape New Generation rotary system (Micro-Mega), with those observed after instrumentation with Reciproc (VDW) and WaveOne (Dentsply-Maillefer) reciprocating systems., Materials and Methods: The mesial canals of 45 mandibular molars (curvature angles between 35° and 45°) were selected. Specimens were randomly divided into three groups, and canal preparations were performed using One Shape, Reciproc, or WaveOne systems (size #25). A digital double radiographic technique was used to determine apical transportation and change in angle of curvature. Also, working time and instrument failures were recorded. Data were statistically analyzed., Results: During preparation, no file fractured. No statistically significant differences were found among groups. No system showed a significantly faster preparation time than others (P > 0.05). All instruments maintained the original canal curvature well and were safe to use., Conclusion: Both continuous rotary instrument and reciprocating systems did not have any influence on the presence of apical transportation or caused an alteration in angle of canal curvature.

Objectives: The aim of this study was to evaluate and assess knowledge and attitude of dental students about medication-related osteonecrosis of the jaw (MRONJ), to optimize future training programs in this field., Materials and Methods: A cross-sectional study was administrated. Ninety-eight participants agreed to complete an anonymous questionnaire. It was divided into two sections: the first section was about general information such as interviewer's gender and date of birth; the second section included questions about bisphosphonates (BPs), others medication associated to osteonecrosis of the jaw (ONJ), risk factors, and prevention of osteonecrosis. Descriptive statistics were computed and the odds ratio was used to compare the odds for the groups., Results: Ninety-nine percent of participants declared to know BPs, but only 26.9% of 4 th year and 34.8% of 6 th year students knew the correct definition of MRONJ. Almost all of students identified the importance to report, in anamnesis, the use of BPs, as well as to check-up patients before the beginning of treatment; on the other hand, the knowledge about how invasive dental treatment might be carried out in patients under therapy was not adequate. In addition, half of the students did not recognize any active principle or commercial name of BPs. The situation was even worse regarding alternative drugs involved in ONJ., Conclusions: These findings are alarming and the lack of knowledge about MRONJ suggests that greater educational efforts should be performed about this pathology at undergraduate level., Competing Interests: There are no conflicts of interest.

Objective: The aim of this case-control study was to compare patients with a healthy peri-implant environment and patients affected by peri-implantitis, evaluating the occurrence of antibodies to extracellular matrix (ECM) molecules. The authors hypothesized the presence of ECM autoantibodies in serum of peri-implantitis patients., Materials and Methods: Patients were divided into two groups: one with dental implants with a diagnosis of peri-implantitis and one control group with implants classified as being "healthy." Enzyme-linked immunosorbent assay was performed on patients' sera to detect human antibodies to type I, III, IV, and V collagens, laminin, and fibronectin. Fisher exact test was performed to evaluate statistical association, with a significant P < 0.05., Results: Forty-two patients were enrolled in this study, 27 females (64.28%) and 15 males (35.72%) with a mean age of 53 ± 29.69 years (age range 32-74). The presence of antibodies to CIII was recorded in 6/21 (28.57%) patients of test group, compared to just 2/21 (9.52%) for the control group, showing a statistically significant difference ( P < 0.05). Other antibodies tested were found to be not statistically significant or absent., Conclusions: Within the limitations of this study, it can be concluded that further studies, with larger sample and different design, are necessary to address the research purpose, evaluating possible associations between anti-ECM antibodies and peri-implantitis., Competing Interests: There are no conflicts of interest.

Title I of the Americans With Disabilities Act prohibits discrimination in employment; however, 26 years later, employment rates for persons with disabilities hover at 34%. This systematic review investigates the effectiveness of evidence-based interventions to increase employment for people with various disabilities. Forty-six articles met the inclusion criteria for evidence-based interventions. The majority of studies assessed interventions for persons with mental health disabilities. Strong evidence was found for ongoing support and work-related social skills training prior to and during competitive employment for persons with mental health disabilities. Moderate evidence supported simulation and use of assistive technology, especially apps for cueing and peer support to increase work participation for persons with intellectual disabilities, neurological/cognitive disabilities, and autism spectrum disorder. Many of the strategies to increase work participation were appropriate for occupational therapy intervention. Suggestions were made for research, specifically looking at more rigorous evaluation of strategies in the long term.

Background: Odontomas are the most common benign odontogenic tumors (especially in children and adolescents) and consist of odontogenic ectomesenchyma and odontogenic epithelium with the formation of dental hard tissues. They are also simply considered hamartomas. The WHO Classification defines them as complex and compound odontomas. The diagnosis is often occasional, in conjunction with x-ray routine examinations, or it is suggested by eruption disorders or abnormal position of teeth in the dental arch. The mainstay therapy is surgical excision of the lesion followed by orthodontic treatment to take in the arch the impacted teeth., Case Report: The aim of this work is the presentation of a case of mandibular bilateral compound odontoma in a young patient, and the confocal laser scanning microscopic analysis of the surgical specimens.

Aim of this study was to investigate a specific airborne particle abrasion pretreatment on dentin and its effects on microtensile bond strengths of four commercial total-etch adhesives. Midcoronal occlusal dentin of extracted human molars was used. Teeth were randomly assigned to 4 groups according to the adhesive system used: OptiBond FL (FL), OptiBond Solo Plus (SO), Prime & Bond (PB), and Riva Bond LC (RB). Specimens from each group were further divided into two subgroups: control specimens were treated with adhesive procedures; abraded specimens were pretreated with airborne particle abrasion using 50  μ m Al 2 O 3 before adhesion. After bonding procedures, composite crowns were incrementally built up. Specimens were sectioned perpendicular to adhesive interface to produce multiple beams, which were tested under tension until failure. Data were statistically analysed. Failure mode analysis was performed. Overall comparison showed significant increase in bond strength ( p < 0.001) between abraded and no-abraded specimens, independently of brand. Intrabrand comparison showed statistical increase when abraded specimens were tested compared to no-abraded ones, with the exception of PB that did not show such difference. Distribution of failure mode was relatively uniform among all subgroups. Surface treatment by airborne particle abrasion with Al 2 O 3 particles can increase the bond strength of total-etch adhesives.

We compared flexural strength (FS) in four resin composites before and after three protocols for thermal cycling aging. Four resin composites were evaluated: Enamel Plus Hri, Gradia Direct Posterior, Grandioso, and Grandioso Flow. Sixty specimens (2 × 2 × 25 mm) were fabricated using a split metallic mold and light-cured for 30 s. The specimens were then randomly divided into four groups and tested using one of the following thermal cycling procedures: (1) storage in deionized water for 24 h (control group), (2) 15,000 cycles, 3) 30,000 cycles, and 4) 45,000 cycles. Each thermal cycling procedure was conducted between 5 °C and 55 °C, with a dwell time of 30 s. All specimens were subjected to a three-point bending test, to determine FS (0.5 mm/min). "Material" and "thermal aging" were significantly associated with FS (P < 0.001). A statistically significant interaction between the two factors was also detected (P < 0.001). In the non-aged groups, nanohybrid composites had the highest FS. FS significantly decreased after thermal cycling protocols in all composites tested. Gradia composite exhibited decrease in FS only after 45,000 cycles. In contrast, FS significantly decreased in the Grandioso Flow composite at 15,000 cycles. The trend in the decrease varied among composites, and the decrement in FS was not proportional to baseline values.

Purpose: To evaluate radiographic and clinical outcomes of immediate occlusally loaded one-piece zirconia implants after 5 years of follow-up., Materials and Methods: This longitudinal clinical investigation included patients older than 18 years, in need of implant-supported single-unit dental rehabilitations. One-piece zirconia in healed and postextraction sites and immediately restored with provisional crowns in light occlusal contact. Definitive zirconia-ceramic restorations were delivered 3 to 4 months after surgery. Primary estimated outcomes were implant survival and success. Periapical radiographs were taken at implant insertion (T0), after 1 year (T1), and after 5 years (T2) to assess marginal bone loss (MBL). Probing depth (PD), modified Bleeding Index (mBI), modified Plaque Index (mPI), and gingival recession (REC) were also measured repeatedly for implants and reference teeth. Changes in parameters over time were assessed using the Wilcoxon signed rank test. In addition, multilevel mixed effects linear and logistic regression models were fitted to take into account within-subject correlations and baseline values., Results: Thirty-two implants were inserted in postextraction and healed sites (n = 16 of each) in 17 patients. One immediate implant was lost after 3 months, and one patient with one implant dropped out after T1. Therefore, the cumulative survival rates were 96.9% at T1 and 96.8% at T2 (4.3 to 6 years). No significant differences were observed in mean MBL between immediate and delayed implants at either T1 or T2. Moreover, different baseline parameters (sex, arch, implant location, smoking habits, grafting) did not show any influence on MBL at either time. In general, for all clinical parameters (PD, mBI, mPI, REC), implants seemed to perform similar to if not better than natural teeth., Conclusion: Radiographic and clinical evaluations after 5 years showed satisfactory amounts of MBL and acceptable soft tissue health.

The variable prescription is widely described under the clinical aspect: the clinics is the result of the evolution of the state-of-the-art, aspect that is less considered in the daily literature. The state-of-the-art is the key to understand not only how we reach where we are but also to learn how to manage propely the torque, focusing on the technical and biomechanical purpos-es that led to the change of the torque values over time. The aim of this study is to update the clinicians on the aspects that affect the torque under the biomechanical sight, helping them to understand how to managing it, following the "timeline changes" in the different techniques so that the Variable Prescription Orthodontic (VPO) would be a suitable tool in every clinical case.