Search

Sucrose acetate isobutyrate SAIB (E444) is a mixture produced by the esterification of sucrose with acetic anhydride and isobutyric anhydride. It is a food additive that is used as an emulsifier in soft drinks. It is difficult to analyse SAIB quantitatively because there are 256 synthesisable structures in the mixture. This study developed an analytical method for SAIB using gas chromatography-flame ionization detection (GC-FID). The pre-treatment of SAIB in soft drinks was performed using a liquid-liquid extraction method, which demonstrated a recovery rate of 107.8 ± 7.2%. In the GC-FID analysis of SAIB, numerous peaks were observed in the chromatogram, and the content of SAIB was calculated as the sum of these peak areas. A series of analytical methods were validated according to International Conference for Harmonization (ICH) guidelines. Accordingly, the applicability of the developed analytical method was confirmed for both domestic and imported soft drinks distributed in Korea. Additionally, in the linoleic acid emulsion, SAIB exhibited better lipid oxidation stability than the natural antioxidant α-tocopherol and had similar efficacy to the synthetic antioxidant butylated hydroxytoluene (BHT). Although SAIB has excellent lipid oxidation stability, it must be used within legal standards according to consumer demand to reduce the use of synthetic materials in processed foods. The validated GC-FID analytical method will enable subsequent monitoring of the distributed products.

New acetyl derivatives of uracil, 6-methyluracil, and thymine were obtained in the course of an unconventional synthesis in methylene chloride. It was shown that products with the acetyloxymethyl fragment are formed according to a mechanism different from that for products with the acetyloxyethyl group. In particular, for uracil it was proven that the reaction with Ac2O, TEA, and CH2Cl2 leads to 1-acetyloxymethyluracil, where the N1 substituent is composed of the -CH2- fragment that originated from CH2Cl2 and the 1-acetyloxy moiety from Ac2O. The reaction of uracil with Ac2O, TEA, CH2Cl2, and DMAP leads to an acetyloxyethyl derivative in which the -CH2-CH2- fragment originates from TEA and the 1-acetyloxy moiety from Ac2O. A possible mechanism for the formation of new compounds was suggested and supported by the density functional theory/B3LYP quantum mechanical calculations. New compounds (39 in total, including seven deuterated) were fully characterized by nuclear magnetic resonance and high-resolution mass spectrometry techniques.

Funding Information: The financial support of the Austrian Federal Ministry of Digital and Economic Affairs and the National Foundation for Research, Technology and Development , Austria, is gratefully acknowledged. We also thank the industrial partners Mondi, Canon Production Printing, Kelheim Fibres, and SIG Combibloc for their support. Publisher Copyright: © 2021 Copyright: Copyright 2021 Elsevier B.V., All rights reserved. Hydrophobization of cellulosic materials and particularly paper products is a commonly used procedure to render papers more resistant to water and moisture. Here, we explore the hydrophobization of unsized paper sheets via the gas phase. We employed three different compounds, namely palmitoyl chloride (PCl), trifluoroacetic anhydride/acetic anhydride (TFAA/Ac2O)) and hexamethyldisilazane (HMDS) which were vaporized and allowed to react with the paper sheets via the gas phase. All routes yielded hydrophobic papers with static water contact angles far above 90° and indicated the formation of covalent bonds. The PCl and TFAA approach negatively impacted the mechanical and optical properties of the paper leading to a decrease in tensile strength and yellowing of the sheets. The HMDS modified papers did not exhibit any differences regarding relevant paper technological parameters (mechanical properties, optical properties, porosity) compared to the non-modified sheets. XPS studies revealed that the HMDS modified samples have a rather low silicon content, pointing at the formation of submonolayers of trimethylsilyl groups on the fiber surfaces in the paper network. This was further investigated by penetration dynamic analysis using ultrasonication, which revealed that the whole fiber network has been homogeneously modified with the silyl groups and not only the very outer surface as for the PCl and the TFAA modified papers. This procedure yields a possibility to study the influence of hydrophobicity on paper sheets and their network properties without changing structural and mechanical paper parameters.

Presented is the analysis of four cannabinoid-based products. These products were part of a case involving visual and auditory hallucinations that precipitated the commission of a felony and subsequent arrest. The products were labeled to contain ∆8-tetrahydrocannabinol (∆8-THC) or THC acetate (THC-O-A). Primary reference materials were not available for ∆8-THC-O-A, ∆10-THC-O-A, cannabidiol di-acetate (CBD-di-O-A) or respective deuterated internal standards. THC-O-A and CBD-di-O-A standards were prepared by derivatizing ∆8-THC, ∆9-THC, ∆10-THC, CBD, ∆9-THC-d3 and CBD-d3 using acetic anhydride. The cannabinoid-based products were determined to contain ∆8-THC, ∆8-THC-O-A, ∆9-THC-O-A and CBD-di-O-A and/or other phytocannabinoids using three different analytical techniques. Direct analysis in real-time–time-of-flight mass spectrometry was used for identifying exact masses. A gas chromatograph–mass spectrometer was used for the identification of compounds and to quantitate THC-O-As in the products. A liquid chromatograph–tandem mass spectrometer was used to identify and quantitate phytocannabinoids and CBD-di-O-A in the products. To the authors’ knowledge, this is the first case report involving the identification of THC-O-As and CBD-di-O-A in commercially available products. Minimal clinical/pharmacological data is available for these emerging synthetic cannabinoids/novel psychoactive substances.

Fully substituted thiazoles were synthesized via the reaction of glycine-based dithiocarbamates with nitroalkenes in the presence of acetic anhydride. The reactions were performed under metal- and solvent-free conditions at comfortable temperatures.

Here, firstly lignin sulfonate was produced from sulfite liquor provided by Mazandaran wood & paper industries (Chookam). Then, the role of effective parameters including reaction temperature, duration time, and amounts of pyridine and acetic anhydride respectively as the catalyst and the esterification agent on the acetylation rate of lignin sulfonate were studied and the process parameters were optimized through multiple experiments. In this investigation, using 1 g lignin sulfonate, the effect of various levels of temperature (ranged from room temperature to 140 °C), reaction time (12–72 h), pyridine volume (0–30 mL), and acetic anhydride volume (5–30 mL) were evaluated. Based on the results of several esterification processes, the optimal values of temperature and reaction time were obtained to be 100 °C and 48 h, respectively, and the optimal volumes of acetic anhydride and pyridine were 20 mL (with equal amounts). Besides, the characterization tests of lignin sulfonate and acetylated lignin sulfonate were performed using FT-IR and NMR techniques. Also in this paper, the morphology and crystallinity/amorphicity of lignin sulfonate and acetylated lignin sulfonate were examined using SEM images and XRD patterns.

We utilized the reaction of chitosan with acetic anhydride to form a chitin gel. This gel was then dried, which formed a chitin sheet. The procedure was extremely easy for a biologist unfamiliar with materials engineering. Spheroids derived from HEK293T cells were formed on the chitin sheet, because the spheroids slightly attached and slowly moved on the chitin sheet.

A novel GC-MS/MS analytical method was established for the qualitative and quantitative determination of tilmicosin in poultry (Jinghai yellow chicken, Gaoyou duck and Yangzhou goose) eggs. The method was based on LLE and SPE for sample extraction and purification. Pyridine and acetic anhydride were used for the derivatization reaction. When tilmicosin was added to blank poultry egg samples at the LOQ and 75 μg/kg, 150 μg/kg, and 300 μg/kg, the recoveries ranged from 72.80% to 88.75%, the intraday and interday RSDs ranged from 2.31% to 4.56% and 3.29%-5.61%, respectively, and the LODs and LOQs ranged from 3.8 to 5.6 μg/kg and 8.4-10.5 μg/kg, respectively. These results confirmed that the parameters of this novel method meet the requirements of the FAOWHO (2014) for veterinary drug residue testing. Poultry egg samples purchased from the local market were analysed according to the established method and only one egg sample was found to contain 18.9 μg/kg of tilmicosin.

This work demonstrates that acetylated maize starches (AMS) with varied degree of substitution (DS, 0.26-2.63) was synthesized in ionic liquids (ILs) (imidazolium chloride, imidazolium carboxylate and choline carboxylate) at 85 °C without catalyst. The DS of AMS and reaction efficiency increased with decreasing alkyl chain length of cations or anions, while decreased as the choline cation replaced the imidazolium cation and the chloride anion replaced the acetate anion. The AMS synthesized in imidazolium-based ILs exhibited much higher hydrophobicity and thermal stability than the native starch. Rheological properties of ILs and ATR-FTIR analysis of acetic anhydride/ILs mixtures indicated that a shorter alkyl side chain or the combination of an imidazolium cation and an acetate anion gave ILs lower viscosities and weaker interactions between acetic anhydride molecules, which favored the acetylation of starch. These findings provide insights into the design of green processes to modify starch and the application of acetylated starch.

Initial sample quantity, solubilization, separation, and visualization of proteins or their proteolytically altered products are some of the challenges of the currently available solution-based N-termini enrichment methods. We therefore took advantage of the conventional SDS-PAGE system and attempted to address these challenges by proposing a simple yet reproducible, negative selection N-termini enrichment strategy coupled with mass spectrometry based protein identification. It includes in-gel protein level labeling of primary amines using d6-acetic anhydride and post-digestion negative selection of labeled N-terminal peptide(s) using N-hydroxysuccinimide activated agarose beads. We demonstrated the superiority of our method by successfully enriching protein N-termini from as low as 10 ng of bovine serum albumin. The method was validated for its applicability to a complex mixture of proteins by selectively enriching neo-N-termini generated by a site specific protease Glu-C. Its effectiveness for deep N-terminome profiling was also shown using human cell lysate. In addition, a system-wide label-free quantitative proteomic analysis of N-termini in MMP2-perturbed HCT8 cell secretome revealed substrates of several extra- and intra-cellular proteases, which are part of cell growth and proliferation and degradation pathways. In brief, the proposed method demonstrates an effective strategy not only to detect N-termini from a single protein but also for the deep and quantitative analysis of N-terminome from a limited sample amount.

This study aimed to determine the effect of “annealing” acetylated potato starch with a homogenous granule size and various degrees of substitution on the thermal pasting characteristics (DSC), resistance to amylases, rheology of the prepared pastes, swelling power and dynamics of drug release. A fraction of large granules was separated from native starch with the sedimentation method and acetylated with various doses of acetic anhydride (6.5, 13.0 or 26.0 26 cm3/100 g starch). The starch acetates were then annealed at slightly lower temperatures than their pasting temperatures. The annealing process caused an almost twofold increase in the resistance to amylolysis and a threefold increase in the swelling power of the modified starch preparations. The heat of phase transition decreased almost two times and the range of starch pasting temperatures over two times, but the pasting temperature itself increased by ca. 10 °C. The 40 g/100 g addition of the modified starch preparation decreased the rate of drug release from a hydrogel by ca. one-fourth compared to the control sample.

Histone post-translational modifications (hPTMs) are epigenetic marks that strongly affect numerous processes, including cell cycling and protein interactions. They have been studied by both antibody- and MS-based methods for years, but the analyses are still challenging, mainly because of the diversity of histones and their modifications arising from high contents of reactive amine groups in their amino acid sequences. Here, we introduce use of trimethylacetic anhydride (TMA) as a new reagent for efficient histone derivatization, which is a requirement for bottom–up proteomic hPTM analysis. TMA can derivatize unmodified amine groups of lysine residues and amine groups generated at peptide N-termini by trypsin digestion. The derivatization is facilitated by microwave irradiation, which also reduces incubation times to minutes. We demonstrate that histone derivatization with TMA reliably provides high yields of fully derivatized peptides and thus is an effective alternative to conventional methods. TMA afforded more than 98% and 99% labeling efficiencies for histones H4 and H3, respectively, thereby enabling accurate quantification of peptide forms. Trimethylacetylation substantially improves chromatographic separation of peptide forms, which is essential for direct quantification based on signals extracted from MS1 data. For this purpose, software widely applied by the proteomics community can be used without additional computational development. Thorough comparison with widely applied propionylation highlights the advantages of TMA-based histone derivatization for monitoring hPTMs in biological samples., Graphical abstract, Highlights • Microwave-assisted labeling of histones using TMA for bottom–up proteomics. • TMA enables discrimination of isobaric peptides by improved chromatographic behavior. • TMA facilitates histone quantification from MS1-level spectral information. • TMA provides excellent performance for monitoring hPTM pattern in the tissues., In Brief The discrimination of isobaric peptides represents a common challenge in histone characterization. This study reports TMA as a novel derivatization reagent for bottom–up proteomics of histone proteoforms. TMA substantially improves separation of positional isomers, which is a prerequisite for identification and quantification of post-translationally modified histone forms.

There is an increasing interest in substituting current packaging films with biologically-derived films without compromising mechanical properties and hydrophobicity. In this work, the esterified galactomannan (E-GM) films with good hydrophobicity, excellent oxygen barrier performance and high tensile mechanical strength were synthesized using anhydride esterification method prior to film formation. The hydrophobicity, mechanical properties, barrier properties, thermal stability and ultraviolet absorption of the prepared films were determined to fully investigate the features of galactomannan-based films. The results indicated that GM films can be successfully obtained by esterification. Compared to neat GM film, E-GM-1.5 film (acetic anhydride to GM of 1.5:1) achieved the highest degree of esterification (0.05), hydrophobicity (107°) and mechanical strength (92.0 MPa). In addition, the esterified GM films had lower toxicity for macrophages cells. The prepared E-GM films may provide more opportunities for further advancement and applications in the development of food packaging from natural resources.

Sensitive real-time detection of vapors produced by the precursors, reagents and solvents used in the illegal drugs manufacture represents a priority nowadays. Acetic anhydride (AA) is the key chemical used as acetylation agent in producing the illegal drugs heroin and methaqualone. This study was directed towards quick detection and quantification of AA in air, using two fast and very sensitive analytical techniques: photoionization detection (PID) and ion mobility spectrometry (IMS). Results obtained indicated that both PID and IMS can sense AA at ultra-trace levels in air, but while PID produces a non-selective response, IMS offers richer information. Ion mobility spectrometric response in the positive ion mode presented one product ion, at reduced ion mobility K0 of 1.89 cm2 V&minus, 1 s&minus, 1 (almost overlapped with positive reactant ion peak), while in the negative ion mode two well separated product ions, with K0 of 1.90 and 1.71 cm2 V&minus, 1, were noticed. Our study showed that by using a portable, commercial IMS system (model Mini IMS, I.U.T. GmbH Berlin) AA can be easily measured at concentrations of 0.05 ppmv (0.2 mg m&minus, 3) in negative ion mode. Best selectivity and sensitivity of the IMS response were therefore achieved in the negative operation mode.

Simultaneous derivatization and air-assisted liquid-liquid microextraction using an organic that is solvent lighter than water has been developed for the extraction of some parabens in different samples with the aid of a newly designed device for collecting the extractant. For this purpose, the sample solution is transferred into a glass test tube and a few microliters of acetic anhydride (as a derivatization agent) and p-xylene (as an extraction solvent) are added to the solution. After performing the procedure, the homemade device consists of an inverse funnel with a capillary tube placed into the tube. In this step, the collected extraction solvent and a part of the aqueous solution are transferred into the device and the organic phase indwells in the capillary tube of the device. Under the optimal conditions, limits of detection and quantification for the analytes were obtained in the ranges of 0.90-2.7 and 3.0-6.1 ng/mL, respectively. The enrichment and enhancement factors were in the ranges of 370-430 and 489-660, respectively. The method precision, expressed as the relative standard deviation, was within the range of 4-6% (n = 6) and 4-9% (n = 4) for intra- and interday precisions, respectively. The proposed method was successfully used for the determination of methyl-, ethyl-, and propyl parabens in cosmetic, hygiene and food samples, and personal care products.

A new format for the Castagnoli–Cushman reaction of structurally diverse dicarboxylic acids, amines, and aldehydes in the presence of acetic anhydride as dehydrating agent is described. The reaction is distinctly amenable to parallel format: the combinatorial array of 180 reactions delivered 157 products of >85% purity without chromatographic purification (of this number, 143 compounds had >94% purity). The new method offers a convenient preparation of the skeletally and peripherally diverse, lead- and druglike γ- and δ-lactam carboxylic acids with high diastereoselectivity in combinatorial fashion.

Antagonistic species of Trichoderma such as T. harzianum, T. viride, T. virens and T. koningii are well-known biocontrol agents that have been reported to suppress pathogenic soil microbes and enhance the growth of crop plants. Secondary metabolites (SMs) including trichothecenes are responsible for its biocontrol activities. The trichothecenes, trichodermin and harzianum A (HA) are produced in species dependent manner respectively, by Trichoderma brevicompactum (TB) and Trichoderma arundinaceum (TA). The last step in the pathway involves the conversion of trichodermol into trichodermin or HA alternatively, which is catalyzed by 4-O-acetyltransferase (encoded by tri3 gene). Comparative sequence analysis of acetyltransferase enzyme of TB with other chloramphenicol acetyltransferase (CAT) family proteins revealed the conserved motif involved in the catalysis. Multiple substrate binding studies were carried out to explore the mechanism behind the two different outcomes. His188 was found to have a role in initial substrate binding. In the case of trichodermin synthesis, represented by ternary complex 1, the trichodermol and acetic anhydride (AAn), the two substrates come very close to each other during molecular simulation analysis so that interactions become possible between them and acetyl group may get transferred from AAn to trichodermol, and Tyr476 residue mediates this phenomenon resulting in the formation of trichodermin. However, in case of the HA biosynthesis using the TB version of enzyme, represented by ternary complex 2, the two substrates, trichodermol and octa-2Z,4E,6E-trienedioic acid (OCTA) did not show any such interactions.

A mild acetolysis method for the regioselective removal of isopropylidene group from di-O-isopropylidene-protected hexopyranosides is reported. O-Isopropylidene-protected intermediates play an important role in carbohydrate chemistry, as they are often found in commercially available furanosyl and pyranosyl materials, and some of them contain more than one O-isopropylidene groups. Methods that permit regioselective removal of O-isopropylidene groups are extremely valuable, as the number of steps in the total synthesis of complex oligosaccharides could be significantly decreased. Here we report that trifluoroacetic acid (TFA)/acetic anhydride (Ac2O) can be used to regioselectively convert one of the two O-isopropylidene groups to vicinal di-O-acetates in the di-O-isopropylidene-protected galacto- and fructo-pyranosyl systems, and the reagent is compatible with some common functionalities such as sulfonate esters, bromide, azide etc.

Although pre-column derivatization with n-propylamine and acetic anhydride combined with the gas chromatograph was a useful method for the analysis of monosaccharide composition, failure often occurs because of lack of detail information on the mechanism as well as the operating key point in derivatization process. In this study, the key points in the derivatization (lactonization time, the amount of n-propylamine and acetic anhydride) were investigated and optimized to improve the method. Under the optimal conditions, the derivatives of seven neutral monosaccharides and two uronic acids were simultaneouly obtained, after which they were well separated and detected by GC. It was also found that all derivatives of monosaccharides were stable even stored for 20days. The linearity, sensitivity, precision, reproducibility and recovery rate of the improved method were evaluated. Thereafter, five polysaccharide samples from different sources were analyzed to validate the improved method.

In search of an effective and less toxic absorption enhancer, we synthesized primary amine acetylation of generation 2 polyamidoamine (G2 PAMAM) dendrimer (Ac-G2) by the reaction of G2 PAMAM dendrimer with acetic anhydride, and evaluated the effects of Ac-G2 on the intestinal absorption of poorly absorbable water-soluble drugs using an in situ closed-loop method in rats. The results indicated that Ac50-G2 had a greatest absorption enhancing effect for 5(6)-carboxyfluorescein (CF) in various acetylation levels of G2 PAMAM dendrimers. Ac50-G2 with various concentrations (0.1-1.0%, w/v) could significantly improve the intestinal absorption of alendronate, CF, and fluorescein isothiocyanate-labeled dextrans (FD4), although they did not enhance the absorption of macromolecular drug of FD10, and the absorption enhancement effect of Ac50-G2 was concentration-dependent. Furthermore, we examined the intestinal membrane damage with or without Ac50-G2. The results displayed Ac50-G2 at lower concentrations (0.1-0.5%, w/v) did not cause any observed toxic effect to the intestinal membranes. These findings suggested Ac50-G2 at lower concentrations (below 0.5%, w/v) might be promising as an effective and safe absorption enhancers to promote the intestinal absorption of poorly absorbable drugs.

The aim of this research was to select microbial strains capable of transforming flavonoid compounds containing an amino group. 6-Aminoflavone (1) was used as a model compound. Biotransformation of 1 by the cultures of Rhodococcus sp. DSM 364 and Gordonia sp. DSM 44456 bacteria led to 6-acetamidoflavone (2) with the isolated yields in 86% and 93%, respectively. The structure of the product was determined on the basis of spectroscopic data, including NMR spectra (1H, 13C, 1H-1H, 1H-13C, and DEPT 135°), a UV and IR spectrum and HR ESI-MS analysis. The developed method of microbial replacement of the amino group in 6-aminoflavone (1) by a acetamido one may find application in chemical industry, being an alternative to the reactions involving acetic anhydride. The antioxidant activity of flavone, and its C-6 substituted derivatives: 6-aminoflavone (1), 6-hydroxyflavone and isolated metabolite 6-acetamidoflavone (2) has been examined using the ABTS and DPPH methods.

Made available in DSpace on 2019-10-06T16:25:16Z (GMT). No. of bitstreams: 0 Previous issue date: 2019-07-15 Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) Chitosan has received a lot of attention as a carrier for small interfering RNA (siRNA), due to its capacity for complexation and intracellular release of these molecules. However, one of its limitations is its insolubility at neutral pH and the tendency towards aggregation of its nanoparticles in isotonic ionic strength. In this study, a series of amphipathic chitosans were synthesized by varying the degree of acetylation (DA) from ˜2 to ˜30 mol% and the degree of substitution (DS) from 5 to 25%. by tertiary amino groups (DEAE) The results showed that the adjustment of these parameters decreases the interparticle interactions mediated by hydrogen bonding to obtain nanoparticles with improved colloidal stability. siRNA-containing nanoparticles of 100 to 150 nm with low polydispersities (0.15–0.2) and slightly positive zeta potentials (˜+ 5 mV) were resistant to aggregation at pH 7.4 and ionic strength of 150 mM. This resistance to aggregation is provided by changes on the nanoparticle surface and highlights the importance of more organized self-assembly in providing colloidal stability at physiological conditions. Additionally, the PEGylation of the most promising vectors conferred favorable physicochemical properties to nanoparticles. The chitosans and their nanoparticles exhibited low toxicity and an efficient cell uptake, as probed by confocal microscopy of rhodamine labeled vectors. The results provide a new approach to overcome the limited stability of chitosan nanoparticles at physiological conditions and show the potential of these amphipathic chitosans as siRNA carriers. Department of Chemistry and Environmental Sciences IBILCE São Paulo State University – UNESP Department of Biology IBILCE São Paulo State University – UNESP Department of Biophysics Paulista School of Medicine Federal University of Sao Paulo Department of Chemistry and Environmental Sciences IBILCE São Paulo State University – UNESP Department of Biology IBILCE São Paulo State University – UNESP CAPES: 1267244 CAPES: 1743469 FAPESP: 2015/05148-1 FAPESP: 2015/20206-8 FAPESP: 2017/10331-5

The purpose of the present study was to determine the effects of acetylation with different doses of acetic anhydride on the chemical composition and chosen functional properties of commercial pumpkin protein concentrate (PPC). The total protein content decreased as compared to unmodified samples. Electrophoretic analysis revealed that in the acetylated pumpkin protein, the content of the heaviest protein (35 kDa) decreased in line with increasing concentrations of modifying reagent. Acetylation of PPC caused a significant increase in water-binding and oil-absorption capacity and for emulsifying properties even at the dose of 0.4 mL/g. Additionally, an increase in foaming capacity was demonstrated for preparations obtained with 2.0 mL/g of acetic anhydride, whereas acetylation with 0.4 and 1.0 mL/g caused a decrease in protein solubility as compared to native PPC.

In this work, an emerging and efficient strategy for the preparation of lignin samples with different acetylation degree by choline chloride/acetic anhydride (ChCl/Aa) treatment of pine kraft lignin (PKL) is reported, and the effects of efficient pre-acetylation of hydroxyl functional groups on subsequent lignin pyrolysis are also systematically investigated. The results show that the ChCl/Aa displays a high acetylation efficiency towards the aliphatic hydroxyl (~99.1%) and phenolic hydroxyl (~94.0%) of PKL, which enhances the hydrogen to carbon effective ratio of PKL. Noticeably, the ChCl/Aa has a slight effect on β-O-4 of PKL, and the acetylation of hydroxyl is beneficial for the improvement of the maximum degradation rate of PKL. In addition, the acetylation of hydroxyl is also significantly contributed to the increment of the pyrolysis bio-oil yield. Importantly, the relative content of the H-phenols obtained from acetylated lignins pyrolysis shows a positive correlation with the acetylation degree of hydroxyl.

Friedel-Craft acylation of veratrole using homogeneous acid catalysts such as AlCl3, FeCl3, ZnCl2, and HF etc. produces acetoveratrone, (3’,4’-dimethoxyacetophenone), which is the intermediate for synthesis of papavarine alkaloids. The problems associated with these homogeneous catalysts can be overcome by using heterogeneous solid catalysts. Since acetoveratrone is a larger molecule, large pore Beta zeolites with smaller particle sizes are beneficial for the liquid-phase acylation of veratrole, for easy diffusion of reactants and products. The present study aims in the acylation of veratrole with acetic anhydride using nanocrystalline Beta Zeolite catalyst. A systematic investigation of the effects of various reaction parameters was done. The catalysts were characterized for their structural features by using XRD, TEM and DLS analyses. The catalytic activity of nanocrystalline Beta zeolite was compared with commercial Beta zeolite for the acylation and was found that nanocrystalline Beta zeolite possessed superior activity.

Cigarette smoke contains many harmful chemicals that contribute to the pathogenesis of smoking-related diseases such as chronic obstructive pulmonary disease, cancer, and cardiovascular disease. Many studies have been done to identify cytotoxic chemicals in cigarette smoke and elucidate the onset of the above-mentioned diseases caused by smoking. However, definitive mechanisms for cigarette smoke toxicity remain unknown. As candidates for cytotoxic chemicals, we have recently found methyl vinyl ketone (MVK) and acetic anhydride in nicotine/tar-free cigarette smoke extract (CSE) using L-tyrosine (Tyr), an amino acid with highly reactive hydroxyl group. The presence of MVK and acetic anhydride in CSE was confirmed by gas chromatography-mass spectrometry (GC/MS). We also found new reaction products formed in B16-BL6 mouse melanoma (B16-BL6) cells treated with CSE using LC/MS. These were identified as glutathione (GSH) conjugates of α,β-unsaturated carbonyl compounds, MVK, crotonaldehyde (CA), and acrolein (ACR), by the mass value and product ion spectra of these new products. ACR and MVK are type-2 alkenes, which are well known as electron acceptors and form Michael-type adducts to nucleophilic side chain of amino acids on peptides. These α,β-unsaturated carbonyl compounds may have a key role in CSE-induced cell death.

The study included 79 patients with coronary artery disease, 25 individuals with preclinical atherosclerosis and 59 healthy controls. Key lipid parameters were examined in all the participants. Levels of antibodies (Abs) against (IgG and IgM) LDL modified by malondialdehyde (MDA), acetic anhydride and hypochlorite, were determined by the enzyme-linked immunosorbent assay (ELISA). Abs specificity was tested by competitive ELISA. Circulating immune complexes (CIC) were isolated by precipitation in polyethylene glycol. Abs to hypochlorite-modified low density lipoprotein (hypochlorite-LDL) were detected in the serum samples. These Abs did not demonstrate cross-reactivity with MDA-modified LDL (MDA-LDL) and acetylated LDL (acetyl-LDL). Patients with coronary artery disease had increased levels of CIC (p0.0001) and decreased levels of Abs (IgM) to hypochlorite-LDL, compared with healthy controls and patients with preclinical atherosclerosis (p=0.006). A correlation between the levels of Abs (IgG) to the hypochlorite-LDL and Abs to MDA- and acetyl-LDL was found. There was a correlation between the content of the Abs (IgM) to MDA- and acetyl-LDL and the concentration of CIC-cholesterol. Lipid parameters did not correlate with Abs levels.59 prakticheski zdorovykh lits. U vsekh patsientov byli opredeleny kliuchevye lipidnye pokazateli. Urovni antitel (AT) klassov IgG i IgM k LPNP, modifitsirovannym malonovym dial'degidom (MDA), uksusnym angidridom i gipokhloritom, opredeliali metodom immunofermentnogo analiza. Spetsifichnost' AT proveriali metodom konkurentnogo immunofermentnogo analiza. Tsirkuliruiushchie immunnye kompleksy (TsIK) vydeliali metodom osazhdeniia v poliétilenglikole s posleduiushchim opredeleniem v nikh soderzhaniia kholesterina énzimaticheskim metodom. V syvorotke krovi obsledovannykh lits byli obnaruzheny AT k LPNP, modifitsirovannym gipokhloritom (gipokhlorit-LPNP), kotorye perekrestno ne vzaimodeĭstvovali s modifitsirovannymi MDA (MDA-LPNP) i atsetilirovanymi LPNP (atset-LPNP). Po sravneniiu so zdorovymi litsami i patsientami s doklinicheskim aterosklerozom u bol'nykh IBS byl povyshen uroven' kholesterina TsIK (KhS-TsIK) (p0,0001) i snizhen (p=0,006) uroven' AT (IgM) k gipokhlorit-LPNP. Obnaruzhena korreliatsiia mezhdu urovniami AT (IgG) k gipokhlorit-LPNP i urovniami AT k MDA- i atset-LPNP. Takzhe nabliudalas' korreliatsiia mezhdu soderzhaniem AT (IgM) k MDA- i atset-LPNP i kontsentratsieĭ kholesterina TsIK (KhS-TsIK). Sviazi mezhdu urovniami AT i lipidnymi pokazateliami ne vyiavleno.

A method based on the combination of hollow fiber liquid-liquid-liquid microextraction and solid-phase microextraction (SPME) followed by gas chromatography-electron capture detection was developed for the determination of chlorophenols in water and wastewater samples. Silica microstructures fabricated on the surface of a stainless steel wire were coated by an organic solvent and used as a SPME fiber. The analytes were extracted through a hollow fiber membrane containing n-decane from sample solution to an alkaline aqueous acceptor phase. They were then extracted and in situ derivatized on the SPME fiber using acetic anhydride. Experimental parameters such as the type of extraction solvent, acceptor phase NaOH concentration, donor phase HCl concentration, the amount of derivatizing reagent, salt concentration, stirring rate and extraction time were investigated and optimized. The precision of the method for the analytes at 0.02-30μgL(-1) concentration level ranged from 7.1 to 10.2% (as intra-day relative standard deviation) and 6.4 to 9.8% (as inter-day relative standard deviation). The linear dynamic ranges were in the interval of 5-500μgL(-1), 0.05-5μgL(-1), 0.02-1μgL(-1) and 0.001-0.5μgL(-1) for 2-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol and pentachlorophenol, respectively. The enrichment factors were between 432 and 785. The limits of detection were in the range of 0.0004-1.2μgL(-1). Tap water, well water and wastewater samples were also analyzed to evaluate the method capability for real sample analysis.

An efficient route to acylated acyclic nucleosides containing a branched hemiaminal ether moiety is reported via three-component alkylation of N-heterocycle (purine nucleobase) with acetal (cyclic or acyclic, variously branched) and anhydride (preferentially acetic anhydride). The procedure employs cheap and easily available acetals, acetic anhydride, and trimethylsilyl trifluoromethanesulfonate (TMSOTf). The multi-component reaction is carried out in acetonitrile at room temperature for 15 min and provides moderate to high yields (up to 88%) of diverse acyclonucleosides branched at the aliphatic side chain. The procedure exhibits a broad substrate scope of N-heterocycles and acetals, and, in the case of purine derivatives, also excellent regioselectivity, giving almost exclusively N-9 isomers.

Selective acetolysis of the primary benzyloxy groups in a wide variety of carbohydrate derivatives was achieved in excellent yield using acetic anhydride and perchloric acid supported over silica (HClO4–SiO2) as a solid acid catalyst in a fast reaction condition without using any organic solvent. The reaction condition is significantly rapid and can be scaled up for its use in the multi-step oligosaccharide synthesis.

Natural flavonoids and xanthone glycosides display several biological activities, with the glycoside moiety playing an important role in the mechanism of action of these metabolites. Herein, to give further insights into the inhibitory activity on cell growth of these classes of compounds, the synthesis of four flavonoids (5, 6, 9, and 10) and one xanthone (7) containing one or more acetoglycoside moieties was carried out. Acetyl groups were introduced using acetic anhydride and microwave irradiation. The introduction of one or two acetoglycoside moieties in the framework of 3,7-dihydroxyflavone (4) was performed using two synthetic methods: the Michael reaction and the Koenigs-Knorr reaction. The in vitro cell growth inhibitory activity of compounds 5, 6, 7, 9, and 10 was investigated in six human tumor cell lines: A375-C5 (malignant melanoma IL-1 insensitive), MCF-7 (breast adenocarcinoma), NCI-H460 (non-small cell lung cancer), U251 (glioblastoma astrocytoma), U373 (glioblastoma astrocytoma), and U87MG (glioblastoma astrocytoma). The new flavonoid 3-hydroxy-7-(2,3,4,6-tetra-O-acetyl-β-glucopyranosyl) flavone (10) was the most potent compound in all tumor cell lines tested, with GI50 values < 8 µM and a notable degree of selectivity for cancer cells. © 2018 by the authors. Funding: This work was supported through national funds provided by Foundation for Science and Technology from the Minister of Science, Technology and Higher Education (FCT/MCTES-PIDDAC) and European Regional Development Fund (ERDF) through the COMPETE—Programa Operacional Factores de Competitividade (POFC) (POCI-01-0145-FEDER-016790), PPCDT—Promover a Produção Científica e Desenvolvimento Tecnológico e a Constituição de Redes Temáticas (Project 3599), under the project PTDC/MAR-BIO/4694/2014 in the framework of the programme PT2020 and INNOVMAR—Innovation and Sustainability in the Management and Exploitation of Marine Resources, reference NORTE-01-0145-FEDER-000035, Research Line NOVELMAR in the framework of North Portugal Regional Operational Programme (NORTE 2020). Acknowledgments: Marta Correia-da-Silva thanks FCT for the postdoctoral fellowship SFRH/BPD/81878/2011 and Ana R. Neves and Patrícia M.A. Silva for the Ph.D. fellowships SFRH/BD/114856/2016 and SFRH/BD/90744/2012, respectively.

Barnyardgrass (Echinochloa crus-galli) is an invasive plant that is difficult to control and is found in abundance as part of the waste of the paddy industry. In this study, barnyardgrass starch was extracted and studied to obtain a novel starch with potential food and non-food applications. We report some of the physicochemical, functional and morphological properties as well as the effect of modifying this starch with acetic anhydride by catalysis with 1, 5 or 10mM of iodine. The extent of the introduction of acetyl groups increased with increasing iodine levels as catalyst. The shape of the granules remained unaltered, but there were low levels of surface corrosion and the overall relative crystallinity decreased. The pasting temperature, enthalpy and other gelatinisation temperatures were reduced by the modification. There was an increase in the viscosity of the pastes, except for the peak viscosity, which was strongly reduced in 10mM iodine.

The objective of this research was to determine if adding reactive reagents to wheat starch granules before addition of alkali (the TRF method) would produce products that are different than those obtained with the conventional procedure (adding alkali before addition of reagent). Laboratory-isolated (LI) and commercial (C) normal (NWS) and waxy (WWS) wheat starches were each reacted with 6 reagents (acetic-adipic mixed anhydride (AAMA), phosphoryl chloride (POCl3), sodium trimetaphosphate (STMP), acetic anhydride (AA), succinic anhydride (SA), octenylsuccinic anhydride (OSA)). Data obtained were similar to those previously obtained with maize starches (Sui, Huber, & BeMiller, 2013). Almost no starch polymer molecule modification occurred when the TRF method and AAMA or AA were used; less than a third as much reaction when SA was the reagent used, and about the same amount of reaction when POCl3, STMP, or OSA were the reagents used (for different reasons).

The acetylation efficiency of nanofibrillated cellulose (NFC) with acetic anhydride as acetyl donor was studied using lipase from Aspergillus niger in a mixture of dimethyl sulphoxide (DMSO) and phosphate buffer solution at ambient conditions and in supercritical carbon dioxide (scCO2). The chemical acetylation of NFC with comparable ester content was carried out for comparison. The ATR-FTIR, solid-state CP/MAS 13C NMR and DSC analyses revealed that, besides the enzyme-catalysed acetylation, predominantly appearing at the C-6 position of cellulose hydroxyls, a strong and stable acyl-enzyme intermediate attachment also occurred on the NFC via Maillard reaction. Enzymatic acetylation via attached acyl-enzyme complex on NFC yielded high hydophobicity (contact angle of 84 ± 9°), whereas the chemical acetylation with comparable ester content resulted in a much lower hydrophobic surface with a contact angle of 33 ± 3°. Finally, the adsorption capacity profiles of lysozyme and BSA proteins on native, chemically and enzymatically acetylated NFC as a function of the pH medium were determined.

Mixed paramylon esters prepared from paramylon (a storage polysaccharide of Euglena), acetic acid, and a long-chain fatty acid by one-pot synthesis using trifluoroacetic anhydride as a promoter and solvent were shown to have thermoplasticity. Size exclusion chromatography indicated that the mixed paramylon esters had a weight average molecular weight of approximately 4.9-6.7×10(5). Thermal analysis showed that these esters were stable in terms of the glass transition temperature (>90°C) and 5% weight loss temperature (>320°C). The degree of substitution of the long alkyl chain group, a dominant factor determining thermoplasticity, was controlled by tuning the feed molar ratio of acetic acid and long-chain fatty acid to paramylon. These results implied that the one-pot synthesis is useful for preparing structurally-well defined thermoplastic mixed paramylon esters with high molecular weight.

An effective Pd-catalyzed hydrocarboxylation of olefins using formic acid with acetic anhydride as a co-catalyst is described. A variety of carboxylic acids are obtained in good yields with high regioselectivities under mild reaction conditions without the use of toxic CO gas.

A titanocene-catalyzed multicomponent coupling is described herein. Using catalytic titanocene, phosphine, and zinc dust, zinc acetylides can be generated from the corresponding iodoalkynes to affect sequential nucleophilic additions to aromatic aldehydes. The intermediate propargylic alkoxides are trapped in situ with acetic anhydride, which are susceptible to a second nucleophilic displacement upon treatment with a variety of electron-rich species, including acetylides, allyl silanes, electron-rich aromatics, silyl enol ethers, and silyl ketene acetals. Additionally, employing cyclopropane carboxaldehydes led to ring-opened products resulting from iodine incorporation. Taken together, these results form the basis for a new mode of three-component coupling reactions, which allows for rapid access to value added products in a single synthetic operation.

An unprecedented double C-S bond formation method has been developed to prepare both symmetric and unsymmetric diarylsulfones with simple arenes in a single step. This represents the first example that K2S2O8 can be employed as a highly effective sulfonating agent to synthesize diarylsulfones. The reaction demonstrates excellent reactivity, good functional group tolerance and high yields.

Histone PTMs play a crucial role in regulating chromatin structure and function, with impact on gene expression. MS is nowadays widely applied to study histone PTMs systematically. Because histones are rich in arginine and lysine, classical shot-gun approaches based on trypsin digestion are typically not employed for histone modifications mapping. Instead, different protocols of chemical derivatization of lysines in combination with trypsin have been implemented to obtain "Arg-C like" digestion products that are more suitable for LC-MS/MS analysis. Although widespread, these strategies have been recently described to cause various side reactions that result in chemical modifications prone to be misinterpreted as native histone marks. These artefacts can also interfere with the quantification process, causing errors in histone PTMs profiling. The work of Paternoster V. et al. is a quantitative assessment of methyl-esterification and other side reactions occurring on histones after chemical derivatization of lysines with propionic anhydride [Proteomics 2016, 16, 2059-2063]. The authors estimate the effect of different solvents, incubation times, and pH on the extent of these side reactions. The results collected indicate that the replacement of methanol with isopropanol or ACN not only blocks methyl-esterification, but also significantly reduces other undesired unspecific reactions. Carefully titrating the pH after propionic anhydride addition is another way to keep methyl-esterification under control. Overall, the authors describe a set of experimental conditions that allow reducing the generation of various artefacts during histone propionylation.

Free sugars reacted with acetic anhydride in a deep eutectic solvent made from choline chloride and ZnCl2 at 90 °C to afford the corresponding peracetates that on further heating to 100 °C underwent selective deacetylation at the anomeric position to furnish the corresponding peracetylated hemiacetals in good yield.