Search

High-silica granites are significant carriers of highly incompatible elements and are closely associated with mineralization of the rare metal beryllium. Thus, understanding their origin and evolution is of paramount importance for comprehending the evolution of the continental crust and enrichment processes of beryllium. This study presents zircon U-Pb ages, whole-rock major and trace element compositions, and Nd-Hf-O isotopic data for Early Cretaceous high-silica granite porphyries, monazite U-Pb ages and Nd isotopic data for beryllium-rich quartz veins, and whole-rock and apatite Nd isotopic data for Permian tuffs in the Dongshanwan WMo-Be deposit in the southern Great Xing'an Range, northeastern China. Our aim is to elucidate the link between mineralization and magmatism and to further our insight into the processes of crystal-melt separation and the mechanisms driving beryllium enrichment in granitic magmatic systems. Zircon U-Pb dating of the high-silica granite porphyry yields a weighted mean 206Pb/238U age of 141 ± 1 Ma, which is consistent with the age of hydrothermal monazite (ca. 140 Ma) from the beryllium-rich quartz veins. Hydrothermal monazite from the intra-granite porphyry quartz vein has positive eNd(t) values (+0.76 to +1.63) that overlap broadly with whole-rock Nd isotopic compositions of the host granite porphyry [eNd(t) = + 1.24 to +1.61]. These characteristics indicate that the Dongshanwan beryllium mineralization was temporally and genetically associated with magmatic-hydrothermal activity of the Dongshanwan high-silica granite porphyries. Our systematic studies suggest that both the Dongshanwan high-silica granite porphyries and coeval Be-barren high-silica granites in the study area are high-K calc-alkaline I-type granites. They originated from a shared magmatic system and formed by the partial melting of a predominantly juvenile medium- to high-K basaltic crustal source, with a minor addition of old crustal components. Rayleigh fractionation modeling indicates that the granitic magma underwent a two-stage crystal-melt separation process. During the first stage, the fractional crystallization of a large proportion of plagioclase, in which beryllium is compatible, not only effectively inhibited beryllium enrichment in the differentiated melt, but also removed a large amount of Ca. During the second stage, minerals in which beryllium is incompatible dominated the fractionating assemblage owing to the low Ca contents in the magma, resulting in a surge in beryllium concentration in the differentiated melt. Our findings reveal that beryllium cannot be appreciably enriched in calc-alkaline granitic magmatic systems until plagioclase fractionation has substantially removed Ca from the system. [ABSTRACT FROM AUTHOR]

Quartz is widely distributed in various magmatic-hydrothermal systems and shows variable textures and trace element contents in multiple generations, enabling quartz to serve as a robust tracer for monitoring hydrothermal fluid evolution. This study demonstrates that integrated high-resolution SEM-CL textures and trace element data of quartz can be used to constrain physicochemical fluid conditions and trace the genesis of quartz in porphyry ore-forming systems. The Bilihe deposit is a gold-only porphyry deposit located in the Central Asian orogenic belt, NE China. Four quartz generations were distinguished following a temporal sequence from early-stage dendritic quartz, unidirectional solidification textured quartz (UST quartz), gray banded vein quartz (BQ), to late-stage white calcite vein quartz (CQ), with the Au precipitation being mostly related to dendritic quartz, UST quartz, and BQ. The well-preserved dendritic quartz with sector-zoned CL intensities and euhedral oscillatory growth zones crystallized rapidly during the late magmatic stage. The relatively low Al contents of dendritic quartz were interpreted to be related to contemporaneous feldspar or mica crystallization, while the high-Ti contents indicate high-crystallization temperatures (~750 °C). The comb-layered UST quartz displays heterogeneous, patchy luminescence with weak zoning, hosts coeval melt and fluid inclusions, and retains the chemical characteristics of magmatic dendritic quartz. High-Ti and low-Al contents of UST quartz suggest a formation at relatively high temperatures (~700 °C) and high-pH conditions. Three sub-types can be defined for hydrothermal BQ (BQ1, BQ2, and BQ3) based on contrasting CL features and trace element contents. The Al contents increase from BQ1 to BQ2 followed by a drop in BQ3, corresponding to an initial decrease and subsequent increase in fluid acidity. Temperature estimates of BQ decrease from BQ1 (635 °C) to BQ3 (575 °C), which may, however, be disturbed by high growth rates and/or high-TiO2 activities. The CQ typically displays a CL-bright core and CL-dark rim with oscillating CL intensities and is characterized by the lowest Ti and highest Al, Li, and Sb contents compared to the other quartz types, which suggests a deposition from more acidic and lower temperature fluids (~250 °C). Trace element patterns indicate that a coupled Si4+ ↔ (Al3+) + (K+) element exchange vector is applicable to dendritic quartz, UST quartz, and BQ. By contrast, charge-compensated cation substitution of Si4+ ↔ (Al3+, Sb3+) + (Li+, Rb+) is favored for CQ. The comparison with compiled trace element data of quartz from other porphyry Au, Cu, and Mo deposits worldwide suggests that Ti, Al, Li, K, and Ge concentrations, as well as Al/Ti and Ge/Ti ratios, have the potential to discriminate the metal fertility of porphyry mineralization. [ABSTRACT FROM AUTHOR]

Porphyry-type molybdenum deposits, many of which are in China, supply most of the World's molybdenum. Of particular importance are the molybdenum deposits located in the Qinling-Dabie region that are responsible for more than half of China's molybdenum production. A feature that distinguishes this suite of deposits from the better-known Climax and Endako sub-types of porphyry molybdenum deposits is their formation from CO2-rich magmatic-hydrothermal fluids. The role of CO2, if any, in the transport of molybdenum by these fluids, however, is poorly understood. We conducted experiments on the partitioning of molybdenum between H2O-CO2, H2O-NaCl, and H2O-NaCl-CO2 fluids and a felsic melt at 850 °C and 100 and 200 MPa. Here we show that the exsolution of separate (immiscible) brine and vapor leads to the very high brine DMo values needed for efficient extraction of Mo from the magmas forming Dabie-type porphyry molybdenum deposits. Direct exsolution of immiscible CO2 vapour and brine from magma greatly enriches the brine in molybdenum, a likely factor in the genesis of the Dabie-type porphyry deposits that supply much of the World's molybdenum [ABSTRACT FROM AUTHOR]

Late Palaeozoic evolution of the Chinese Altai-East Junggar orogenic collage is vital for a better understanding of the accretionary evolution in the southern Altaids. This paper reports new geochronological, geochemical, and isotopic data for the magmatic rocks collected from the northern part of the Dulate arc. The ~304.6 Ma tonalite samples present typical adakitic features of high Sr (396–714 ppm), low Y (1.42–2.60 ppm), Yb (0.11–0.24 ppm), and high Sr/Y (177.25–440.23) ratios. Combining high Mg# (55.35–57.21) and depleted isotopic composition (εHf(t): +9.89 to +13.37 and εNd(t): +5.36 to +6.06), we suggest that they were derived from the partial melting of a subducted oceanic slab. The ~299.4 Ma monzogranite samples have high A/CNK values (1.08 to 1.25), CIPW normative corundum contents (1.28–3.25 wt.%), and positive εHf(t) (+5.14 to +8.63) and εNd(t) (+1.08) values, which are similar to S-type granite that may be generated by the melting of greywackes. The monzogranite (~286.9 Ma) and rhyolitic porphyry (~283.9 Ma) are high-K calc-alkaline and similar to the highly fractionated I-type granites with depleted isotopic features (εHf(t): +11.68 to +14.99 and +0.75 to +7.18, εNd(t): +5.91 and +6.18). The monzogranite and rhyolitic porphyry could have been derived from a depleted mantle source, but the rhyolitic porphyry probably suffered partial assimilation of the overlying crust materials. Combining regional rock associations of mafic-ultramafic complexes, adakitic rocks, high-Mg diorites, and A-type granites with close spatial-temporal relationship, we conclude that a mid-oceanic ridge of the Ob-Zaisan Ocean subducted southward beneath the Dulate arc during the latest Carboniferous to Permian. With the opening of the slab window, the upwelling asthenosphere provided high heat flux and triggered various magmatism in the upper plate. We propose that ridge subduction is one of the most effective mechanisms of continental growth in the southern Altaids. [ABSTRACT FROM AUTHOR]

Syncollisional magmatism plays an important but underappreciated role in continental crust growth and maturation. However, the origin of syncollisional intermediate magmas in continental subduction zones is controversial, with some models suggesting they form by arc-related processes, and others indicating they form by later slab breakoff-induced melting. Diorite porphyry dikes intruding granitic gneiss in the Paleo-Tethyan Sulu ultrahigh-pressure (UHP) continental collisional orogen have inherited zircon grains with 206Pb/238U ages of ca. 749-238 Ma, and magmatic zircons with weighted mean ages of 216-215 Ma, falling within the well-constrained time range (ca. 235-208 Ma) tracking exhumation of the Sulu UHP rocks from UHP peak conditions to amphibolite facies; they are thus syncollisional. The dikes have high Cr (330-402 ppm), Ni (84.5-103 ppm), and Mg# (64-66) values, showing a mantle origin. The porphyries have relatively high Sm/Yb, Nb/Y, La/Yb, and Gd/Yb ratios, representing a classic signature of slab breakoff magmatism. Together with the arc-like traceelement patterns and enriched Sr-Nd isotope compositions, ages, and εHf(t) values (-19.5 to -17.0) of magmatic zircons and their tectonic setting, we propose a syncollisional slab breakoff model in which the melts were initially generated from asthenospheric upwelling in the gap created when the oceanic slab attached to the Yangtze craton detached underneath the North China craton during Late Triassic collision following Paleo-Tethys Ocean closure. The diorite porphyry dikes have consistent Sr-Nd isotope compositions and spatiotemporal relationships with the nearby Shidao gabbro-syenite-granite complex, for which the tectonic affinity is controversial. Thus, we argue that the diorite porphyries and Shidao complex were sourced from two cratons, including the enriched subcontinental lithospheric mantle of the North China craton, which interacted with abundant felsic melts derived from the sinking slab breaking away from the subducted crust of the Yangtze continental-ocean transitional margin. This study sheds new light on crustal recycling versus continental growth in collisional orogens and implies that considerable syncollisional intermediate magmas can be generated by slab breakoff in continental subduction zones, representing hybrid additions to continental growth that are different and more evolved than arc magmas and have a composition similar to that of the bulk continental crust. [ABSTRACT FROM AUTHOR]

The Yulekenhalasu porphyry Cu-Mo deposit (0.2 Mt Cu at 1.04 wt% and 0.012 Mt Mo at 0.06 wt%) is located in the Devonian Halasu copper belt, East Junggar block, northwest China. At Yulekenhalasu, Cu and Mo mineralization commonly occurs as disseminated sulfides or veinlets in porphyry-related alteration zones. Five alteration stages have been identified, including porphyry-type alteration, i.e., sodic-calcic (stage I), potassic (stage IIa), propylitic (stage IIb), and phyllic (stage III) alteration, and widespread late Cu sulfide-bearing veins (stage IV) cross-cutting porphyry-type alteration, plus a post-ore fault-controlled argillic alteration (stage V). Stages IV and V have overprinted porphyry-type alteration (stages I–III). Anomalous concentrations of trace elements in stage IIb pyrite (e.g., Ti, Zr, Gd, and Hf) are due to the presence of micro-inclusions (e.g., zircon and rutile) in the low-temperature (~200 °C) propylitic zone. Cu, Ag, Co, and Mn, occurring as stoichiometric substitutions or as tetrahedrite inclusions in overprinting stage IV pyrite, were sourced directly from the primary hydrothermal fluid. The enrichment of distal pathfinder elements (e.g., Cr, Au, and Tl) in overprinting stage V pyrite was caused by a low-temperature (~160 °C) hydrothermal event related to regional orogenic Au mineralization. The spatial variation of Se/S in pyrite among various paragenetic stages were influenced by changes in the hydrothermal fluid composition and temperature, with the latter having the effect of decreasing pyrite Se/S. Lower Se concentrations in pyrite of stages IIb and III close to the orebody are explained by relatively higher temperatures in the locus of mineralization. This may provide a potential vectoring tool to mineralization using pyrite geochemistry in porphyry deposits. Systematic thermodynamic calibrations were applied to pyrite compositions to fingerprint the corresponding Se/S and Co/Ni ratios of fluids and further to develop a complete metallogenic model for Yulekenhalasu. The Devonian diorite porphyry generated fluids that produced the early porphyry-type alteration. High Co/Fe (average ~1 × 10–4) and Ni/Fe (average ~3 × 10–6) ratios of fluid for late Cu sulfide-bearing veins, combined with higher Se/S (average ~6 ×x 10–7) than orogenic Au deposits (average ~3 × 10–8), indicate that the fluids possibly derived from a Late Devonian-Carboniferous mafic intrusion. Argillic alteration assemblages forming at ca. 280 Ma host pyrite relatively enriched in Au (average 0.1 ppm, with native gold inclusions). Therefore it is likely related to a regional orogenic gold mineralizing event in the Early Permian that overprinted Devonian mineralization. Although spatially contiguous, hydrothermal alteration and hypogene mineralizing stages identified herein represent discrete episodes of hydrothermal activities at Yulekenhalasu. The multi-stage alteration features observed at Yulekenhalasu may provide insights into the complete evolutionary history of Paleozoic porphyry Cu deposit systems in the Central Asian orogenic belt. This study contributes to a better understanding of the metallogenic and exploration models of porphyry Cu deposits overprinted by multi-stage hydrothermal events, which is economically important in Phanerozoic orogenic belts. [ABSTRACT FROM AUTHOR]

Paleoproterozoic A-type granites are widely distributed in the southern margin of the North China Craton (SNCC), providing important information for understanding the Paleoproterozoic tectonic regimes in this area. This paper reports newly obtained whole-rock compositions and zircon U-Pb ages for the Tieluping syenogranite porphyry (TLP) and Huoshenmiao alkali granite porphyry (HSM) in the SNCC. Zircons from the TLP and HSM have U-Pb ages of 1 805 ± 12 and 1 792 ± 14 Ma, respectively. These ages are taken to date the emplacement of these intrusions. They had high total alkali contents (K2O + Na2O > 7.13 wt.%), with high 10 000 × Ga/Al ratios (3.06–3.41) and Zr + Y + Nb + Ce values (709 ppm–910 ppm) as well as high zircon saturation temperatures (864–970 °C), indicative of A-type granite affinities. High Y/Nb (1.75–3.32), Ce/Nb (7.72–9.72), and Yb/Ta (2.89–5.60) ratios suggested that TLP and HSM belonged to the A2-type granite. The negative whole rock εNd(t) values (−8.4 to −6.6) and negative zircon εHf(t) values (−15.9 to −6.3) confirmed that TLP and HSM were likely generated by the partial melting of an ancient continental crust. The εHf(t) (−7.4 to +4.0) values of inherited zircons in the TLP suggested that they were derived from the partial melting of Archean basement rocks. Considering the geochemical similarity of the 1.80 Ga A-type granitoids in the SNCC, we propose that the TLP and HSM were formed in a post-collisional regime that was likely associated with the break-off of the Paleoproterozoic subducted slab. Upwelling of the asthenosphere provided huge heat to generate the regional 1.80 Ga A-type granite in the SNCC. [ABSTRACT FROM AUTHOR]

Delineation of hydrothermal alteration zoning is important for exploration vectoring toward mineralization centers in porphyry systems, and shortwave infrared (SWIR) spectroscopy is widely used to map hydrothermal minerals distribution for porphyry Cu exploration. However, the SWIR method cannot effectively detect anhydrous alteration minerals (e.g., K-feldspar) in the potassic zone. Magnetite can be formed by potassic alteration and destroyed by phyllic (quartz-sericite-pyrite) alteration. The relative intensity of these two alteration types can be quantified by magnetic susceptibility. Here, we integrate the SWIR and magnetic susceptibility measurements to map hydrothermal alteration zones at the Pulang porphyry Cu-Au deposit in northwestern Yunnan, one of the largest porphyry deposits in the SW China-mainland SE Asia region. White mica, chlorite, and montmorillonite + kaolinite were identified in ~ 60%, ~ 30%, and ~ 15% of the analyzed samples from the Pulang deposit, respectively. Volumetric bulk magnetic susceptibility (Kbulk) values are high in the potassic-altered rocks, but low in phyllic-altered rocks. Using white mica as a proxy for sericite alteration, white mica-chlorite assemblage for chlorite-sericite alteration, chlorite-epidote-actinolite assemblage for propylitic alteration, montmorillonite-kaolinite-dickite assemblage for argillic alteration, and Kbulk (> 0.5 × 10–3 SI) for potassic alteration, we delineate the alteration zoning at Pulang. From the causative porphyry center outward, four alteration zones are delineated (potassic → chlorite-sericite → sericite → argillic). The ore-distal propylitic alteration was developed both in the shallow and deeper levels of the hydrothermal system, resembling typical porphyry-style alteration zoning patterns. Our work shows that high Kbulk value is a useful vector toward Cu mineralization at Pulang, whereas illite crystallinity (SWIR-IC), white mica Al–OH spectral absorption peak, and chlorite Fe-OH spectral absorption peak are less effective. We highlight that magnetic susceptibility measurement is an effective alteration-mapping method when mineralization is developed in the potassic zone (with largely aspectral minerals such as quartz, K-feldspar, and magnetite), while SWIR scalars are more useful when mineralization is developed in the phyllic and/or propylitic zones. [ABSTRACT FROM AUTHOR]

The Wunugetu deposit, a large-scale porphyry copper–molybdenum deposit, is located in the southern Erguna block. Its ore bodies are primarily found within monzogranites, granite porphyries, and biotite monzogranites. Additionally, the deposit contains late-stage intrusive dykes of rhyolitic porphyries. This study examined the deposit's monzogranites and rhyolitic porphyries using lithogeochemistry, zircon U-Pb dating, and Hf isotopic analysis. The main findings include: (1) Zircon U-Pb dating showed that the monzogranites formed around 209.0 ± 1.0 Ma, whereas the rhyolitic porphyries in the northern portion formed around 170.49 ± 0.81 Ma, suggesting magmatic activity in the deposit spanned from the Late Triassic to the Middle Jurassic. (2) The monzogranites exhibited high silicon content (73.16–80.47 wt.%) and relatively low aluminum content (10.98–14.37 wt.%). They are enriched in alkalis (content: 3.42–10.10 wt.%) and deficient in magnesium and sodium, with aluminum saturation indices (A/CNK) ranging from 1.1 to 2.9. In addition, the monzogranites are enriched in large-ion lithophile elements (LILEs) such as Rb, K, and Ba and deficient in high-field-strength elements (HFSEs) like Nb, P, and Ti. (3) The monzogranites have low Zr + Nb + Ce + Y contents of (151.3–298.6 ppm) × 10−6 and 10,000 × Ga/Al ratios varying between 1.20 and 2.33, suggesting that they are characteristic of I-type granites. (4) Positive zircon εHf(t) values ranging from +0.3 to +7.6 in both rhyolitic porphyry and monzogranite samples, increasing with younger emplacement ages, imply that the deposit's rocks originated from magmatic mixing between mantle-derived mafic magmas and remelts of the juvenile crust. Considering these results and the regional geological evolution, this study proposes that the Wunugetu deposit was formed in an active continental margin setting and was influenced by the Late Triassic–Middle Jurassic southeastward subduction of the Mongol-Okhotsk Ocean. [ABSTRACT FROM AUTHOR]

The large Dongtangzi Zn-Pb deposit is located in the southwest of the Fengxian–Taibai (abbreviated as Fengtai) ore cluster in the west Qinling orogen. The origin of the deposit is controversial, positing diverse genesis mechanisms such as sedimentary-exhalative (SEDEX), sedimentary-reformed, and epigenetic-hydrothermal types. This study combines systematic ore geology observations with high-precision Rb-Sr and Sm-Nd ages of 211 Ma and in situ S-Pb isotopes to constrain the timing and origin of mineralization. In situ S-Pb isotopic studies show that the sulfide ores display a narrow range of δ34S values from 1.1‰ to 10.2‰, with 206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb ratios of 18.07 to 18.27, 15.64 to 15.66, and 38.22 to 38.76, respectively. On the other hand, pyrites of the sedimentary period and the granite porphyry dike have δ34S values ranging from 15.8 to 21.4‰ and from 2.1 to 4.3‰ (with 206Pb/204Pb ratios of 18.09 to 18.10, 207Pb/204Pb ratios of 15.59 to 15.61, and 208Pb/204Pb ratios of 38.17 to 38.24), respectively. The above-mentioned S-Pb isotopic compositions indicate that the metallic materials involved in ore formation originated from a mixture of Triassic magmatic hydrothermal fluid and metamorphic basement. By integrating the regional geology, mineralization ages, and S-Pb isotopic studies, we propose that the Dongtangzi Zn-Pb deposit is the product of epigenetic hydrothermal fluid processes, driven by Late Triassic regional tectono-magmatic processes. [ABSTRACT FROM AUTHOR]

The Shuangyuangou copper deposit is located in the southern segment of the Qinling orogenic belt in central China. The ore‐related intrusions include quartz diorite porphyry, granite porphyry and lamprophyre. In this study, we present whole‐rock geochemistry, zircon U–Pb geochronology, trace elements and Lu–Hf isotope data on the Shuangyuangou intrusions which provide critical constraints on the emplacement age, magma origin, petrogenesis and implications for porphyry Cu mineralization in this newly discovered deposit. Zircon U–Pb dating constrains the emplacement age of quartz diorite porphyry, lamprophyre and granite porphyry at 150–147 Ma. The quartz diorite porphyry and granite porphyry display high‐K calc–alkaline I‐type granite affiliation. The rocks show enrichment of LREE and LILE (Rb, Ba), depletion in HREE and HFSE (Nb, Ta, Ti) and absence of Eu anomaly. Zircon εHf(t) values of quartz diorite porphyry, lamprophyre and granite porphyry range from −7.5 to −1.7 with TDM2 ages of 1.3–1.6 Ga. Our data suggest that the parental magma was derived from partial melting of juvenile lower crust and metasomatic lithospheric mantle, with more involvement of mantle material for the lamprophyre. The zircon Eu/Eu* values of 0.55–0.78 suggest high magmatic water content which suppresses the fractionation of plagioclase. In addition, the ΔFMQ values calculated from zircon trace elements range from −0.90 to 2.96 which is a favourable factor for porphyry Cu mineralization at Shuangyuangou. The Late Jurassic Shuangyuangou intrusion and associated Cu mineralization were formed within an intracontinental setting after the collisional assembly of the Qinling orogenic belt. [ABSTRACT FROM AUTHOR]

The Ulgen porphyry Mo deposit, recently discovered in the northeastern segment of the Derbugan metallogenic belt, NE China, is a large and hidden ore deposit. Investigation of this deposit provides insights into the geodynamic background and metallogenic mechanism of Mesozoic porphyry Mo deposits that are exposed elsewhere in NE China. The host rocks consist of muscovite monzonitic granite (MMG) and biotite granitic porphyry (BGP), which are intruded into Lower and/or Middle Jurassic intermediate-felsic volcanic-sedimentary rocks and pre-ore monzogranitic porphyry (MP). Zircon laser ablation-inductively coupled plasma-mass spectrometric (LA-ICP-MS) U-Pb age dating indicates that the MMG and BGP were emplaced at 144.9 Ma and 144.7 Ma, ca. 14 m.y. younger than the intrusion age of MP (159.3 Ma). Molybdenite Re-Os isotopic dating indicates that Mo mineralization occurred at 144.9 Ma, almost simultaneously with the 145 Ma magmatic activity. Geochemically, all of the Ulgen granitoids are enriched in large ion lithophile elements (e.g., Rb, Th, U, and K) and light rare earth elements, and are depleted in high field strength elements (e.g., Nb, Ta, and Ti). The pre-ore MPs belong to I-type granites with moderately negative Eu anomalies (Eu/Eu* = 0.62-0.65), whereas the syn-ore MMGs exhibit S-type affinity with pronounced negative Eu anomalies (Eu/Eu* = 0.29-0.39). The ore-forming BGPs display adakite-like geochemical features in terms of high-Sr, low-Y, and low-Yb contents, and slightly negative Eu anomalies (Eu/Eu* = 0.72-0.74). All intrusive rocks have relatively low initial (87Sr/86Sr)i ratios (0.7044-0.7055) and positive εNd(t) values (+1.15 to +2.65), positive εHf(t) values (+4.0 to +9.4), young two-stage Nd and Hf model ages (tDM2(Nd) = 841-731 Ma, tDM2(Hf) = 943-604 Ma), and moderate (206Pb/204Pb)i (18.300-18.402), (207Pb/204Pb)i (15.557-15.564), and (208Pb/204Pb)i (38.180-38.307) ratios. Therefore, it is most likely that these intrusive rocks originated from a mixture of two sources of magma derived from the mantle and juvenile lower crust, in which there were variable degrees of the fractional crystallization of ilmenite, apatite, and plagioclase. Rather than the partial melting of oceanic slabs, the fractional crystallization of hornblende and accessory minerals (e.g., ilmenite and apatite) induces the adakitic geochemical signature of BGPs. Compared with the BGPs, the MPs had a relatively deeper magma source region, whereas the MMGs had a relatively shallower magma source region. The BGPs and the Mo-bearing fluids of the Ulgen deposit were most probably derived simultaneously from magma that was generated at an extensional setting following the closure of the Mongol-Okhotsk Ocean during the latest Jurassic. Enrichment of Mo by late-stage fractional crystallization most likely played an important role in concentrating Mo during the formation of the Ulgen hidden Mo deposit. [ABSTRACT FROM AUTHOR]

Prospecting for and exploiting buried mineral deposits is currently challenging. Given their high precision and resolution, reflection seismic methods might be useful in such applications involving deep mineral deposits. However, there are few open seismic datasets available from mineral deposit exploration, especially in hardrock environments. The world‐class Caosiyao porphyry Molybdenum deposit (1.76 Mt) in the Jining area of Inner Mongolia, China, is largely covered by loess layers, which poses challenges to its exploration. Seismic reflection surveys were conducted to help delineate the deep granite porphyry intrusions and associated orebodies. This paper presents the raw seismic reflection dataset from three profiles on the Caosiyao deposit area, which can be used as a standard dataset for reflection seismic processing in shallow coverage and hardrock areas. Situated at the juxtaposition of the Khondalite Belt and the Trans‐North China Orogen in the northern North China Craton, the Jining region hosts considerable known porphyry Mo deposits. As such, this open dataset can assist in research on deep geological structures and hence increase prospecting efficiency in geologically similar areas. [ABSTRACT FROM AUTHOR]

The Dasuji giant porphyry molybdenum deposit is one of the largest ore deposits recently discovered along the Yinshan–Yanshan–Liaoning molybdenum belt in China. Using this deposit along the Yinshan–Yanshan–Liaoning molybdenum belt as the study area, the present study proposed a two-stage approach aimed at marking out the hydrothermally altered anomalies in the study area for the guidance of future prospecting in other regions. First of all, the Principal Component Analysis (PCA) and specific Band Ratio methods were applied to the ASTER images from different acquisition dates to extract ferric oxides and hydroxyl alterations related to the porphyry molybdenum deposit. Then, the Fractal-Aided Anomaly-Overlaying Selection model was adopted to recognize two ferric and hydroxyl alteration layers for separating anomalies from the interferences caused by geology and random noise from the data. Furthermore, for lithological differentiation in the previously marked off area, the Random Forest Classifier (RFC) was applied to the composite data obtained via the ASTER, ETM, and DEM, and it is demonstrated that the DEM can significantly improve lithological mapping in areas with complex vegetation cover and topography. Based on field verification and comparison with geological maps, the research revealed that the suggested two-stage approach may effectively reduce erroneously recognized anomalies produced during the first stage while retaining ore-related anomalies for gigantic porphyry molybdenum deposit prospecting in the Dasuji area, which showed the good application potential of the proposed model to extract actual hydrothermally altered anomalies adopted for lithological discrimination and mapping. [ABSTRACT FROM AUTHOR]

The southern margin of the North China Craton (SNCC) contains 8 giant (> 0.5 Mt Mo resources), 4 large (0.1–0.5 Mt Mo resources) and many small (< 0.1 Mt Mo resources) porphyry Mo deposits. Their magmatism ages are concentrated within 150–131 Ma, but it is unclear what determines the size of porphyry Mo systems. Herein, we synthesize new and existing data for the Mo-bearing intrusions in the SNCC to investigate the optimal conditions for giant deposit formation. These intrusions share similar whole-rock geochemistry characteristics and highly differentiated features, with SiO2 and K2O contents ranging from 68.55 to 79.13 wt.% and 2.63 to 11.18 wt.%, respectively. They share similar lower crustal sources with a variable input of mantle materials. Their εNd(t) and εHf(t) values range from -19.1 to -12.7 and -29.5 to -9.3, respectively, and indicate no relationship with metal fertility. The similar ΔFMQ values calculated from zircon geochemistry also suggest that the porphyry Mo deposit size is unrelated to magma redox conditions. High magmatic water contents and high differentiation features (SiO2 > 73 wt.%) exhibit significant positive correlations with the deposit size. Therefore, we propose that magma with a high water content triggered by intensive fractional crystallization is the fundamental requirement to produce large Mo endowment in the SNCC. This conclusion is consistent with the criteria that pulsed release of mineralizing fluids from a large magma chamber through fractional crystallization play an important role in the formation of giant porphyry Mo deposits in other molybdenum belts in the world. [ABSTRACT FROM AUTHOR]

The Hongyuan porphyry Mo–Cu deposit (PMCD) is a rare example of a "reduced" deposit, in contrast to classical oxidized porphyry Cu or Mo–Cu deposits. It is characterized by an ilmenite–series I–type felsic granitoid intrusion, reduced ore‐forming fluids with methane‐rich fluid inclusions, and widely distributed primary pyrrhotite. Mo–Cu mineralization in the Hongyuan PMCD occurs as disseminated in porphyry, granular in miarolitic cavity, and vein‐type in the quartz vein. These three types of mineralization are generally produced in the late magmatic period, magmatic‐hydrothermal transition period, and hydrothermal period, respectively. Molybdenite from miarolitic cavities shows a greater contribution from mantle fluid, as evidenced by mantle He proportions of 37.6%–16.8%. Molybdenite in quartz veins has relatively lower mantle He proportions of 1.63%–10.5%, indicating a predominantly crustal fluid source. The 3He/4He variations of these two groups of molybdenite illustrate an increasing input of crustal fluid during the magmatic to hydrothermal transition. Molybdenite samples from miarolitic cavities and quartz veins yield a Re‐Os model age of 300.5 ± 3.7 Ma, which is consistent with the U–Pb ages of zircons in the wallrock porphyries (300–302 Ma). This further indicates simultaneous diagenesis accompanied by mineralization. The Sr–Nd isotopic compositions (initial 87Sr/86Sr: 0.703404–0.703552; initial 143Nd/144Nd: 0.512585–0.512655; εNd[t]: +6.56 to +7.90) and young T2DM model ages (421–531 Ma) of the Hongyuan porphyries suggest that these rocks were derived from partial melting of the basaltic lower crust. We propose that mantle‐derived fluids rose up and mixed with fluids from the lower crust under an extensional tectonic setting, forming mantle‐like Sr–Nd–He–Ar isotopic compositions. The pre‐mineralization stage of the Hongyuan reduced PMCD is marked by quartz‐molybdenite ± K‐feldspar ± pyrite veins or veinlets and miarolitic cavities in the intensively potassic alteration zone. These veins formed at high temperatures (400–476°C) and high salinities (47.5–56.6 wt.%). The syn‐mineralization stage is the main metallogenic stage represented by numerous quartz‐molybdenite ± pyrrhotite veins associated with moderate to high temperatures (248°C–424°C) and low to high salinities (1.57–50.1 wt.%). The post‐mineralization stage is characterized by low temperatures (104–270°C) and low salinities (0.35–8.81 wt.%). Fluid immiscibility, mixing with meteoric water, ore fluid‐wall rock interactions, and decreasing temperature and salinity have played important roles during molybdenum mineralization. [ABSTRACT FROM AUTHOR]

The Lower Urgen molybdenum deposit (44,856 t Mo @ 0.141%), situated in the northern Great Xing'an Range, is a newly discovered porphyry molybdenum deposit. Mineralization is characterized by veinlet-disseminated- and vein-type quartz–sulfide orebodies primarily occurring in the cupola of the Early Cretaceous granite porphyry stock. In this study, we present a detailed description of the ore geology, molybdenite Re-Os dating, H-O-S-Pb isotopic compositions, and fluid inclusion (FI) analyses including petrography, laser Raman, and microthermometry to precisely constrain the timing of ore formation, the origin of ore-forming fluids and materials, as well as the metal precipitation mechanism. Molybdenite Re-Os dating yielded two model ages of 141.2 ± 1.5 and 147.7 ± 1.7 Ma, coeval with the regional Late Jurassic–Early Cretaceous molybdenum metallogenesis. The hydrothermal process can be divided into three stages: the quartz–molybdenite(–pyrite) stage, quartz–polymetallic sulfide stage, and quartz–carbonate stage. Four types of FIs were distinguished for quartz, including two-phase liquid-rich (L-type), saline (S-type), CO2-rich (C1-type), and CO2-bearing (C2-type) FIs. Microthermometric data showed that the homogenization temperatures and salinities from the early to late stages were 240–430 °C, 5.0–11.9, and 30.1–50.8 wt% NaCl equiv.; 180–280 °C and 3.0–9.1 wt% NaCl equiv.; and 120–220 °C and 0.2–7.9 wt% NaCl equiv., respectively, suggesting a decreasing trend. H-O isotopic compositions indicate that the ore-forming fluids were initially of magmatic origin with the increasing incorporation of meteoric water. S-Pb isotopic compositions indicate that the ore-forming materials originated from granitic magmas, and the mineralization is genetically related to the ore-bearing granite porphyry stock in the deposit. Fluid immiscibility and fluid–rock interaction are collectively responsible for the massive deposition of molybdenite in stage 1, whereas fluid mixing and immiscibility played a critical role in the deposition of polymetallic sulfide in stage 2. [ABSTRACT FROM AUTHOR]

Northwest Zhejiang area (NWZJ) is one of the important parts of the large Qingzhou-Hangzhou mineralized belt in South China formed during the Late Jurassic–Early Cretaceous period. Through the study of zircon LA-ICPMS U-Pb dating, whole-rock geochemistry, and Sr-Nd isotopes for the Wujinshan granitoid in NWZJ, two distinct S-type granitic rocks of porphyry type granodiorite and granite were identified, and the two ages of 146.4 ± 1.5 Ma for granodiorite porphyry and 141.9 ± 1.4 Ma for granite porphyries were obtained. These rocks exhibited a geochemical affinity for S-type granitoid, and the two magmatic ages indicate that these rocks were intruded in two magmatic pulses. The Late Jurassic granodiorite porphyry showed moderate SiO2 (64.38–67.89 wt.%) with higher K2O + Na2O (6.22–6.78 wt.%), lower K2O/Na2O (0.57–0.96), moderate Zr (170–215 ppm), high Sr (302–475 ppm), and low Mg# (31–32) contents. The Early Cretaceous granite porphyries contained high SiO2 (69.68–74.85 wt.%), variable K2O + Na2O (4.60–6.99), high K2O/Na2O (1.72–23.53), slightly higher Zr (160–255 ppm), variable Sr (25–412 ppm), and very low to intermediate Mg# (13–44). The granodiorites had intermediate ∑REE (149–177 ppm), while granite samples showed moderate to high ∑REE content (147–271 ppm), and both rocks showed negative Eu anomalies (0.18–0.29). We propose that these two rocks were predominantly generated by the partial melting of Mesoproterozoic metamorphic basement and underwent variable degrees of fractionation and evolution. The Late Jurassic granodiorite porphyry was formed by the partial melting of Mesoproterozoic metamorphic basement with slab-derived melts or basaltic lower crust input following fractional crystallization, while the Early Cretaceous granite porphyries were generated by the partial melting of Mesoproterozoic metamorphic basement and crystal fractionation with variable magma mixing and assimilation in the upper crust. Tectonically, the Wujinshan granitoid formed in a volcanic arc setting largely affected by the subduction and slab rollback of the paleo-Pacific Plate. [ABSTRACT FROM AUTHOR]

In recent years, the development of airborne magnetic survey technology based on unmanned aerial vehicles (UAVs) has been rapidly advancing. The commonly used systems are the fixed-wing UAV-based, multi-rotors UAV-based, and unmanned helicopters-based magnetic survey systems. And, a type of hybrid UAV that uses a vertical takeoff and landing (VTOL) and fixed-wing cruise mode is increasingly being used to carry airborne magnetic survey systems. To meet the requirements of most UAVs for small-sized and lightweight payloads, a miniature magnetic survey system was developed and integrated into a hybrid fixed-wing UAV and formed an aeromagnetic survey system. And, a peripheral mineral exploration test was conducted in a known porphyry copper–gold deposit in southeastern China using the system. By processing the collected magnetic data with 3D inversion of susceptibilities, potential ore-bearing intrusive rocks were quickly identified and delineated, providing clues for peripheral mineral exploration in the mining area. [ABSTRACT FROM AUTHOR]

We constrain the magma sources of representative post‐collisional ore‐associated and barren suites in the Sanjiang metallogenic belt, Southwest China. The ore‐associated suites generally have higher Mg# and Cr and Ni contents than the crustal melts. Also, they show wide ranges of whole‐rock Nd and zircon Hf isotopes that are similar to the subduction‐modified mantle‐derived alkaline volcanic rocks in the region. Combing with the geochemical model, we suggest that the ore‐associated suites dominantly originated from partial melts of subduction‐metasomatised mantle by fractional crystallisation. In contrast, the barren suites are mainly characterised by low Mg# and Cr and Ni contents that are comparable to the crustal melts and they have enriched whole‐rock Nd and zircon Hf isotopes, indicating a metasomatised lower crustal origin. The different magma sources play an important role in controlling the fertility of contemporary ore‐associated and barren magmatic suites during post‐collisional porphyry ore formation. [ABSTRACT FROM AUTHOR]

Volatile element abundance is a crucial factor triggering mineralization and controlling the enrichment of molybdenum in porphyry deposits. The Chalukou deposit is the largest porphyry Mo deposit in NE China, with an average grade of 0.087% Mo. In this contribution, we present petrology, bulk geochemistry, zircon U–Pb geochronology and Lu–Hf isotopes, and apatite geochemistry for the Chalukou deposit. The intrusive rocks include pre‐mineralization monzogranite, syn‐mineralization quartz porphyry, fine‐grained porphyry and granite porphyry, and post‐mineralization monzogranite and feldspar porphyry. These granitoids are metaluminous to peraluminous, and belong to alkali‐calcic to calc‐alkalic series. Zircon εHf(t) values of granitoids range from +0.2 to +5.7 with corresponding Hf crustal model ages of 805–1170 Ma, indicating a Mesoproterozoic juvenile crustal source modified by mantle‐derived magma. They are characterized by logf(O2) of −16.1 to −9.4, with an average of −12.5, ΔFMQ of +0.8 to +7.9, with an average of +4.5, showing a relatively high oxidation state for the syn‐mineralization magma. The apatites in quartz porphyry have the highest F contents, ranging from 3.61 to 4.62 wt%. At Chalukou, F‐rich magma is conducive to the convection of magma and promotes the efficient separation of differentiation magma, making the magmatic‐hydrothermal fluid circulate many times, eventually resulting in the accumulation of ore‐forming materials on the top of the magma chamber and gradually aggravating mineral enrichment processes. [ABSTRACT FROM AUTHOR]

The Beiya giant porphyry Au deposit is the largest Cenozoic Au deposit in the Jinshajiang Cu–Mo–Au metallogenic belt. Many granite porphyries of ~36 Ma were exposed in the Beiya deposit, including the Wandongshan (WDS) and Hongnitang monzogranite porphyries (HNT–MPs) with economically important Au metal resources, the uneconomic WDS biotite MP, and Putaishan granite porphyry (GP), and subeconomic MPs at Nandaping (NDP) and Matouwan (MTW) prospects. To reveal the fundamental factors that lead to the different fertility of these granitic porphyries, this study uses the biotite and zircon geochemical compositions to evaluate their petrogenetic and magmatic conditions (e.g., F content, pressure, fO2). The results show that biotites from economic WDS and HNT–MPs exhibit moderate F contents (0.85%–2.16%), low n(FeT)/n(FeT + Mg) ratios (average of 0.36), and shallow emplacement depths of 0.19–1.76 km. In contrast, the uneconomic granite porphyries are characterized by variable F contents (0.17%–2.75%), high n(FeT)/n(FeT + Mg) ratios (average of 0.43), and deep emplacement depths of 2.76 to 5.02 km. Moreover, the economic WDS and HNT–MPs display higher average zircon fO2 (ΔFMQ [fayalite–magnetite–quartz] of +0.88) than uneconomic granite porphyries (ΔFMQ of −0.19), further confirming a higher fO2 of the economic granitic porphyries. These features indicate that magmatic fO2 is a critical factor controlling Cu–Au mineralization at the Beiya Au deposit. In comparison with the economic WDS and HNT–MPs, the subeconomic MPs in the MTW and NDP prospects exhibit higher average biotite n(FeT)/n(FeT + Mg) ratios of 0.47 and 0.45, and lower average zircon ΔFMQ of −0.05 and −0.23, suggesting lower magmatic fO2 and thus have relatively weak potentials to form Cu–Au mineralization. Notably, the economic WDS and HNT–MPs have higher biotite XMg ratios than those of the subeconomic and uneconomic granitic porphyries, indicating that the economic MPs were formed by the partial melting of mixed lower crustal materials with more mantle‐derived materials. Therefore, the addition of mantle‐derived materials played an important role in determining the fO2 of the granitic porphyry, thus primarily controlling its fertility of Cu–Au mineralization. [ABSTRACT FROM AUTHOR]

Oxygen fugacity (fO2) is a critical factor that controls the formation mechanisms of the porphyry Cu deposits. However, the differentiation of the fO2 in post-collisional Au-mineralized and Cu-mineralized porphyry intrusions remains unclear. The post-collisional Jinshajiang–Ailaoshan metallogenic belt hosts several Eocene Cu–Au–Mo porphyry systems including the Yulong Cu, Machangqing Cu, Chang'anchong Cu, and Beiya Au deposits and contains several barren porphyry intrusions, such as the Jianchuan, Putaishan, and Bailiancun granite porphyries. This study compares the zircon chemistry, magmatic fO2, and petrogenesis among the Cu-mineralized, Au-mineralized, and ore-barren porphyries. Our results show that the fO2 of the Cu- and Au-porphyry systems (average ΔFMQ = + 1.59 ± 0.77) is higher than that of the ore-barren (average ΔFMQ = − 0.43 ± 0.91) granite porphyry. Notably, compared to the Au-mineralized porphyries (average ΔFMQ = + 0.99 ± 0.70), the Cu-mineralized porphyries crystallized from more oxidized magma (average ΔFMQ = + 1.89 ± 0.60). All the Cu-mineralized, Au-mineralized, and ore-barren porphyry intrusions originated from partial melting of a thickened lower crust with minor input from the enriched lithospheric mantle-derived melts. The lithosphere of the Au-mineralized and ore-barren porphyry intrusions was influenced mainly by the slab-derived fluids, whereas the lithosphere of the Cu-mineralized porphyry intrusions was metasomatized by slab-derived melts. Therefore, we propose that the parental magmas for the Cu–mineralized porphyry possibly inherited the high oxidation state of the slab-derived melts and then contributed to the high fO2 of the Cu-mineralized granite porphyries. Collectively, the magmatic processes at deep levels played an essential role in determining the fO2 of the granite porphyry, thus controlling the mineralization diversity. [ABSTRACT FROM AUTHOR]

Porphyry Mo deposits are the most important type of Mo resource. They result from a high oxygen fugacity of the parent magma, which acts as an effective indicator for evaluating the mineralization. In the ore-forming system of porphyry Mo deposits, sulfur exists mainly as sulfate in highly oxidized magma but as sulfide in ores. What triggers the reduction in the mineralization system that leads to sulfide precipitation has not yet been determined. Most of the previous studies have focused on the origin and evolution of the ore-forming parent magma, and the effects of reductive surrounding rocks on porphyry mineralization have been ignored. In this study, a comprehensive geological–geochemical investigation and review have been performed on the typical porphyry Mo deposits, the Nannihu-Sandaozhuang, Yuchiling, and Shapingou deposits in China, and the Mt. Emmons deposits in America. Black carbonaceous sedimentary layers commonly surround porphyry Mo ores, which are widely altered and discolored during mineralization. CH4 is commonly present in fluid inclusions in the main mineralization stage, and the δ13CV-PDB values of calcite and fluid inclusions from the altered surrounding rocks and ore minerals are generally low and significantly different from those of marine sedimentary carbonate rocks, indicating that the involvement of reductive components from carbonaceous surrounding rocks might be key to the redox state transformation leading to mineral precipitation. On the other hand, the CH4 produced by the thermal decomposition of organic matter or carbonaceous reaction with H2O can diffuse into the ore-forming system along the structural fractures and reduce the SO42− in the ore-forming hydrothermal fluids to form sulfide precipitation without direct contact between the intrusion and the carbonaceous surrounding rocks. Moreover, the CH4 content controls the location of the orebody formation with the high content producing orebodies mainly in the porphyry intrusion, while the low CH4 content results in the orebodies mainly occurring at the contact zone between the porphyry and carbonaceous surrounding rocks. Compared to the magmatic stage of mineralization, the involvement of reductive components in the carbonaceous surrounding rocks during the hydrothermal stage is more favorable for forming giant/large Mo deposits. The highly oxidized porphyry with reductive carbonaceous surrounding rocks or Fe-rich volcanic rocks offers a new indicator for efficiently evaluating porphyry Mo mineralization. [ABSTRACT FROM AUTHOR]

The Yangchuling porphyry W–Mo deposit is an oxidized tungsten deposit in the Jiangnan tungsten belt, which is the largest tungsten belt in the world. Both W- and Mo-mineralization predominantly occur in the cupola of a monzogranite porphyry with abundant mafic dikes and microgranular mafic enclaves (MMEs). Acicular apatite in MMEs and similar SIMS U–Pb zircon ages of the monzogranite porphyry (149.7 ± 1.1 Ma) and MMEs (148.7 ± 1.3 Ma) suggesting mixing of mafic and felsic melts. Plagioclase phenocrysts are oscillatory zoned with An-rich and An-poor zones with lower 87Sr/86Srinitial values and higher contents of Mg, Ti, and Sr in the An-rich zones and resorption surfaces in An-poor bands. These textures reflect multiple injection of mafic magma into the magma system responsible for the formation of the Yangchuling deposit. Whole rock Sr–Nd isotope data and zircon Hf–O isotope data indicate 60–70% contribution from the enriched mantle and 30–40% from the crust to the ore-forming granitic rocks. The W and Mo endowments of the Yangchuling deposit and other W-Mo deposits in the Jiangnan tungsten belt have different sources. Whereas W is derived from the melting of supracrustal metasedimentary rocks, Mo is contributed by mafic magmas. The latter is inferred from (i) the close relationship of Mo mineralization with mafic dikes and MMEs rather than the more evolved monzogranite porphyry and (ii) higher Mo concentrations in scheelite from MMEs (3020–3406 ppm) than in scheelite from the host monzogranitic porphyry (540–1886 ppm). On the scale of the whole Jiangnan tungsten belt, granitic rocks with more intense Mo mineralization have higher εHf zircon values that demonstrate higher input of mantle material to the deposit-forming granites. [ABSTRACT FROM AUTHOR]

The origin of intermediate to felsic potassic magmas is debated, and not much is known about the volatile content of potassic magmas associated with porphyry Cu (Au, Mo) deposits. To better understand the liquid line of decent of mafic potassic magmas and the behavior of volatiles during magma differentiation, we performed 19 experiments at 1.0 GPa and 1150 °C to 850 °C using piston cylinder presses. We developed a new experimental technique that involves a capsule liner made of single-crystal zircon to prevent the loss of Fe and S in the starting material to the noble metal capsule. The starting material is a high-Mg, basaltic trachyandesite (52 wt% SiO2, 12 wt% MgO, 1.9 wt% Na2O and 5.3 wt% K2O) from the Sanjiang region in southwestern China, doped with geologically realistic amounts of volatiles (i.e. 4.0 wt% H2O, 0.34 wt% CO2, 0.27 wt% Cl and 0.25 wt% S). The addition of 0.25 wt% S in the form of anhydrite internally buffered the experiments at an oxygen fugacity of 2.0 ± 0.5 log units above the fayalite–magnetite–quartz buffer, which is similar to the redox state of the Sanjiang variously evolved potassic magmas. The experimentally produced silicate melts match well with the Sanjiang intermediate to felsic magmas in terms of major, minor and trace element compositions, and also with regard to the S and Cl contents. The sequence of crystallizing minerals (olivine + clinopyroxene –> biotite ± orthopyroxene –> apatite –> K-feldspar) also fits with the one observed in the Sanjiang mafic to intermediate magmas. These results suggest that the Sanjiang intermediate to felsic magmas, including the porphyry Cu (Au, Mo)-forming magmas, can form solely by differentiation of potassic mafic magmas without any involvement of old crustal material. During experimental differentiation at 1.0 GPa, the S content of the evolving silicate melt first increased until ~57 wt% melt SiO2, and then decreased in response to precipitation of sulfides, sulfate melt and/or anhydrite, whereas the H2O and Cl contents of the evolving silicate melt increased exponentially until saturation in a CO2-rich fluid was reached at 60 to 65 wt% melt SiO2 and ~ 8 wt% melt H2O. During further magma differentiation the H2O and Cl contents of the evolving silicate melt remained constant until ~70 wt% melt SiO2, after which point the Cl content of the silicate melt decreased due to increased partitioning of Cl into the fluid phase ± increased fluid/melt ratio. Based on these experimental results and petrographic and geochemical evidence from natural samples, the Sanjiang porphyry Cu (Au, Mo)-forming magmas (65–70 wt% SiO2) are interpreted to have formed through differentiation of primitive, mantle-derived, potassic magmas in the lower crust (≥1.0 GPa), and to have ascended ±directly from the lower crust to shallow crustal levels. They likely contained 8 to 13 wt% H2O, 0.37 to 0.90 wt% Cl and 0.07–0.29 wt% S. This case study on the magma evolution in the Sanjiang region may have implications for the origin and nature of intermediate to felsic potassic magmas in various tectonic settings. [ABSTRACT FROM AUTHOR]

The recently discovered 460 Gaodi porphyry Mo-Cu deposit is a sub-economic deposit characterized by low Mo-Cu grades, dispersed mineralization, and separated Mo- and Cu-ore bodies. This study aims to elucidate the factors underlying this type of sub-economic mineralization. Electron-microprobe analyses of biotite from ore-related granite porphyry yielded Ti-in-biotite crystallization temperatures of 677–734 °C (an average of 719 °C) and biotite phenocryst crystallization depths of 6.0 to 12.9 km. LA-ICP-MS analyses of zircons from the same sample revealed average zircon Ce4+/Ce3+ ratios of 299.7 and elevated zircon lg(ƒO2) ratios, with an average ΔFMQ of +6.6 ± 1.9. These discoveries suggest that the magma responsible for ore formation boasts a high degree of oxidation, yet also possesses a magma chamber located at a significant depth within the upper crust. This implies an extensive exsolving depth for fluids. Furthermore, our microthermometry analysis of fluid inclusions reveals that a portion of the fluid experiences considerable conductive cooling as it ascends along the conduit, owing to the depth of fluid exsolution. This process results in the ore fluids remaining in the liquid-only region without undergoing boiling, which is conducive to the enrichment of metals. We emphasize the fact that fluid-exsolving depth plays a critical role in determining the metal grades and economic value of a porphyry deposit by regulating the P-T evolution path of the ore fluids [ABSTRACT FROM AUTHOR]

Tourmaline tends to occur in porphyry Cu–Au deposits as an alteration or gangue mineral. However, abundant primary tourmalines in miarolitic cavities or interstitially distributed with other silicate minerals have been found in the Shiwu porphyry Cu–Au deposit in West Junggar, NW China. These tourmalines are normally accompanied by pyrite and have a high affinity for Cu and Au mineralization. A combined study of the petrology, geochronology, isotope, and mineral geochemistry data of the tourmaline-rich igneous rocks and the wallrock of tourmaline-poor pyroxene diorite has been completed. The laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS) U–Pb dating of zircons from tourmaline-poor pyroxene diorite, tourmaline-rich diorite, and tourmaline-rich andesite shows the ages of the zircons to be 317.0 ± 1.0 Ma (MSWD = 0.37, n = 18), 315.8 ± 1.0 Ma (MSWD = 0.84, n = 22), and 306.4 ± 1.6 Ma (MSWD = 1.15, n = 15), respectively. The relatively low values of Hf isotopes (εHf(t) = +6.0 to +13.6) suggest that the tourmaline-poor pyroxene diorite is sourced from a mixed melt of juvenile mantle materials with old crustal components. The tourmaline-rich diorite and the tourmaline-rich andesite that contain higher εHf(t) values (ranging from +13.3 to +17.9) are mainly derived from juvenile mantle materials. In addition, the εHf(t) values in the tourmaline-poor pyroxene diorite and the tourmaline-rich diorite (+13.3 to +16.1) and andesite (+16.3 to +17.9) are gradually rising with their age evolution, which indicates that more and more mantle-derived components are joining in their formation process. This process has also been recorded in primary tourmaline growth, e.g., the EPMA profile reveals an increase in the contents of Fe and other metals and a decrease in Al contents from the inside (core) to the outside (growth zoning). Therefore, the injection of mantle-derived magma that could supply the large amount of copper and gold was critical for the formation of the Shiwu porphyry Cu–Au deposit. [ABSTRACT FROM AUTHOR]

The Dexing porphyry deposit is the largest porphyry Cu–Mo–Au deposit in South China. Biotite composition can record the physicochemical conditions and evolution history of magmatic-hydrothermal system. Biotite from the Dexing porphyry deposit could be divided to three types: primary magmatic biotite (Bi-M), hydrothermal altered magmatic biotite (Bi-A) and hydrothermal biotite (Bi-H). The temperature of Bi-M and Bi-H range from 719 to 767 °C and 690 to 727 °C, respectively. Both magmatic and hydrothermal biotite have high Fe3+/Fe2+ ratios (from 0.18 to 0.24) and XMg values (from 0.57 to 0.66), indicating a high oxygen fugacity. Bi-M has F lower than Bi-A and Bi-H (up to 0.26 wt%), but has Cl (Cl = 0.18–0.30 wt%) similar to Bi-A and Bi-H (Cl = 0.21–0.35 wt%), suggesting that high Cl/F ratios of early hydrothermal fluid may result from the exsolution from high Cl magma. From potassic alteration zone to phyllic and propylitic alteration zones, Cl decreases with increasing Cu, whereas F increases roughly. Therefore, Cl mostly originate from magma, but enrichment of F possibly results from reaction of fluids and Neoproterozoic strata. Negative correlation between Cl and Cu indicates that Cl might act as an important catalyst during Cu mineralization process. Biotite from Dexing has similar halogen compositions to other porphyry Cu-/Mo deposits in the world. Chlorine contents of hydrothermal fluid may be critical for Cu transportation and enrichment, while consumption of Cl would promote Cu deposition. [ABSTRACT FROM AUTHOR]

The magmatic process within upper crust encompasses various contents such as the transition between magmatic and hydrothermal systems and changes in oxygen fugacity (ƒO2), which ultimately play key roles in the formation of porphyry Cu deposits (PCDs). However, tracing these magmatic processes, especially in porphyry systems, is not an easy task. This study reported the detailed process of magmatic fluid exsolution and systematical variation of magmatic ƒO2 within the upper crust of a Tongchang–Chang'anchong porphyry Cu deposit, based on detailed investigations of mineral crystallization sequences and compositional features of the minerals in the fertile porphyries. Results indicate that the fertile porphyries show a high initial ƒO2, with ΔFMQ ≥ +3.0 (ΔFMQ is the deviation of logƒO2 from the fayalite–magnetite–quartz (FMQ) buffer). The magmatic ƒO2 (ΔFMQ) continued to decrease to ~+2 until fluid exsolution occurred at ~790 °C due to wall-rock contamination. The magmatic fluid exsolution process caused a temporary increase in the ƒO2 (to ΔFMQ = ~+3.4). The high magmatic ƒO2 during this process (790–750 °C) resulted in a higher content of ore-forming materials in the exsolved magmatic fluid. When the temperature dropped below 750 °C, the magmatic ƒO2 began to continuously decrease and eventually reached ΔFMQ = ~+0.6. The lower magmatic ƒO2 hindered the further migration of ore-forming materials through the exsolved fluid during this process (< 750 °C). Results of this study indicate that the initial magma during the upper crustal magmatic process of PCDs generally has a high ƒO2, and the contamination of reduced components can significantly decrease the magmatic ƒO2. The early magmatic fluid exsolution process can maintain a high magmatic ƒO2 condition, thereby efficiently extracting ore-forming minerals and producing ore-forming fluids, which is the key to the formation of PCDs. The latter continuous decrease in magmatic ƒO2 during the fluid exsolution process may be the reason preventing the Tongchang–Chang'anchong porphyry Cu deposit to form a giant PCD. [ABSTRACT FROM AUTHOR]

The Habo deposit is a typical porphyry Cu‐Mo deposit in the Ailaoshan–Red River metallogenic belt. Ore minerals in the Habo deposit typically occur as veins in the monzonite porphyry. Zircon U‐Pb dating suggests that the monzonite porphyry formed at 35.07 ± 0.38 Ma. The monzonite porphyry is characterized by high SiO2, Al2O3, K2O and Na2O contents, with A/CNK ratios ranging from 0.97 to 1.02. All samples exhibit fractionated REE patterns, characterized by high (La/Yb)N ratios (9.4–13.6, average of 11.2). They show adakite‐like geochemical features, high Sr concentrations (627–751 ppm, average of 700 ppm), low Y concentrations (15.13–16.86 ppm, average of 15.81 ppm) and high Sr/Y values (39.5–47.4, average of 44.3). These samples have high initial 87Sr/86Sr ratios (0.7074–0.7076) and negative εNd(t) values (–5.1 to −3.7), whereas the zircon εHf(t) values range from −2.2 to +0.4, suggesting that the monzonite porphyry was derived from the partial melting of a thickened juvenile lower crust. The oxygen fugacity, calculated on the basis of the chemical composition of the amphiboles, shows ΔNNO values ranging from +1.65 to +2.16 (average of 1.94) and lg(fO2) ranging from −12.72 to −11.99 (average of −12.25), indicating that the monzonite porphyry has high oxygen fugacity. Zircons have high Ce4+/Ce3+ ratios (29.29–164.24, average of 84.92), with high ΔFMQ values ranging from +0.50 to +1.51 (average of 0.87) and high lg(fO2) values ranging from −14.72 to −12.85 (average of −14.07), which also indicates that the oxygen fugacity of the magma was high. The dissolved water content of the Habo monzonite porphyry is 9.5–11.5 wt%, according to the geochemical characteristics, zircon‐saturation thermometry (692–794°C) and the mineral phases (amphibole, no plagioclase) in the deep magma chamber. Combined with previous studies, we propose that the high oxygen fugacity and high water content of magma played key roles in controlling the formation of the Habo and other Cu‐Mo‐Au deposits in the Ailaoshan–Red River metallogenic belt. [ABSTRACT FROM AUTHOR]

The East Kunlun Orogenic Belt (EKOB) is the most important Triassic polymetallic metallogenic belt in China. A study about the petrogenesis of the ore-related intrusions is of great significance to the geodynamic evolution of orogenic belts. In this study, analysis of U–Pb zircon dating, whole-rock major and trace element compositions, and zircon Hf isotopes for the granitoids hosting the Aikengdelesite Mo (–Cu) and Halongxiuma Mo deposits in the EKOB are studied to determine their chronology and petrogenesis. Zircon date results show that the Aikengdelesite granite porphyry and the Halongxiuma granodiorite porphyry formed at 244.2 ± 1.7 Ma and 230.0 ± 1.0 Ma respectively. All samples of the Aikengdelesite granite porphyry and the Halongxiuma granodiorite porphyry which have high SiO2 and K2O contents, and low MgO and Cr, belong to the high-K calc-alkaline series. The Aikengdelesite granite porphyry samples show I-type geochemical affinities, whereas the Halongxiuma granodiorite porphyry samples are A-type granitoids. They all show negative zircon εHf(t) values (−7.4 to −3.3 and −3.7 to −2.5). We suggest that the Aikengdelesite granite porphyry may have been derived from the lower continental crust. While the Halongxiuma granodiorite porphyry could have formed by partial melting of basic lower crustal materials. By combining the results of this study with previous data, two magmatic and mineralization peak periods (278–237 Ma and 230–210 Ma) were observed in the Paleo-Tethys of the EKOB. Porphyry–skarn deposits occurring in the first episode were formed in the setting of an active continental margin related to the Paleo-Tethys Ocean plate subduction (e.g., Aikengdelesite porphyry deposit), while deposits occurring in the second episode were formed in a post-collisional setting (e.g., Halongxiuma porphyry deposit). [ABSTRACT FROM AUTHOR]

The Dongxiang tungsten–copper deposit is a large W–Cu deposit located in the northeast of Jiangxi province in south China. Previous studies have mainly considered the geochemical and isotopic attributes of the ore deposit, but information is still lacking on the genesis and setting of Dongxiang W–Cu mineralization-related intrusive rocks. This paper presents systematic elements and Sr–Nd–Hf isotopic data of the Dongxiang granodiorite porphyry. The Dongxiang granodiorite porphyry is intermediate–acidic in composition, with SiO2 contents of 60.00–75.16 wt.%, Al2O3 contents of 10.15–18.53 wt.%, an K2O contents of 2.95–4.28 wt.%. The REEs content ranges from 64.2 to 198.1 ppm, with LREE/HREE ratios of 7.67–17.47. It is characterized by adakitic geochemical affinities with high Sr/Y and (La/Yb)N ratios but low Y and Yb contents. A slight Eu anomaly, extreme depletion in Y and Yb, relatively low MgO content, and relatively high 207Pb/204Pb ratios together indicate that the Dongxiang granodiorite porphyry was likely derived from partial melting of the thickened lower continental crust. Based on zircon εHf(t) values (−11.8–−4.5), two-stage Hf model ages (1.33–1.94 Ga), and the regional geological setting, it can be inferred that Dongxiang granodiorite porphyry magma is mainly derived from Neoproterozoic juvenile crust with the involvement of Paleoproterozoic ancient crust. [ABSTRACT FROM AUTHOR]

Most porphyry Cu deposits are formed in magmatic arc settings, but some occur in non-arc environments, such as intracontinental settings. The petrogenesis of fertile magmas for porphyry Cu deposits formed in intracontinental settings is still ambiguous. To address this issue, we performed an integrated study of the late Mesozoic porphyry Cu deposits in the South Qinling Orogenic Belt. Zircon U–Pb ages indicate that these late Mesozoic porphyry Cu deposits were formed at 149–142 Ma, in a postcollisional intracontinental setting. εNd(t) (− 4.5 to − 2.7), initial 87Sr/86Sr (0.7046 to 0.7084), and zircon εHf(t) values (− 3.8 to + 2.2) of the late Mesozoic ore-forming and barren rocks suggest that both originate from Meso-Neoproterozoic juvenile lower crust. Whole-rock geochemical and isotopic characteristics indicate that the ore-forming rocks could be formed by the delamination of thickened juvenile lower crust or by the reaction of mantle with normal juvenile lower crust. The barren rocks could be formed by the partial melting of thickened or normal juvenile lower crust. Whole-rock petrochemistry and reversed anorthite contents and Sr isotope data of zoned plagioclase crystals indicate that the mafic magma was recharged into the ore-forming magma chamber. Due to the injection of mafic magma, the ore-forming rocks obtained higher oxygen fugacity, volatiles, water, sulfur, and Cu contents than the barren rocks. According to the regional tectonic evolution, the late Mesozoic porphyry Cu deposits in the South Qinling Orogenic Belt were formed in an extensional environment due to transformation of the tectonic regime. Large-scale lithospheric extension caused asthenospheric mantle upwelling and crust-mantle interaction, providing the crucial metallogenic conditions. Moreover, the injection of mantle-derived mafic magma into the normal magma is a key factor in the formation of the late Mesozoic porphyry Cu deposits in the SQB and similar porphyry systems in an intracontinental setting. [ABSTRACT FROM AUTHOR]

With the development of hyperspectral technology, it has become possible to classify alteration zones using hyperspectral data. Since various altered rocks are comprehensive manifestations of mineral assemblages, their spectra are highly similar, which greatly increases the difficulty of distinguishing among them. In this study, a Semi-Supervised Adversarial Autoencoder (SSAAE) was proposed to classify the alteration zones, using the drill core hyperspectral data collected from the Pulang porphyry copper deposit. The multiscale feature extractor was first integrated into the encoder to fully exploit and mine the latent feature representations of hyperspectral data, which were further transformed into discrete class vectors using a classifier. Second, the decoder reconstructed the original inputs with the latent and class vectors. Third, we imposed a categorical distribution on the discrete class vectors represented in the one-hot form using the adversarial regularization process and incorporated the supervised classification process into the network to better guide the network training using the limited labeled data. The comparison experiments on the synthetic dataset and measured hyperspectral dataset were conducted to quantitatively and qualitatively certify the effect of the proposed method. The results show that the SSAAE outperformed six other methods for classifying alteration zones. Moreover, we further displayed the delineated results of the SSAAE on the cross-section, in which the alteration zones were sensible from a geological point of view and had good spatial consistency with the occurrence of Cu, which further demonstrates that the SSAAE had good applicability for the classification of alteration zones. [ABSTRACT FROM AUTHOR]

This study uses the method of Audio-frequency magnetotelluric sounding (EH4) to detect and analyze the deep geological structure in the Donglifang mining area. The underground spatial electricity and structural characteristics were effectively determined. We built an EH4-based indicator system for localizing ore bodies and summarized the relationship between the apparent resistivity anomalies and the ore bodies in the EH4 profile. The shallow veined or columnar low-resistance bodies may correspond to the low-medium temperature hydrothermal gold, lead, and zinc polymetallic ore bodies; the columnar medium-resistance or medium -low resistance bodies correspond to the silica or porphyry copper-molybdenum polymetallic ore bodies; the medium-resistance bodies correspond to the medium acidic magmatic rocks (porphyrites and porphyries). We identified eleven concealed ore bodies in the deep of the mine area, five of which are consistent with the drill holes, and the remaining six have an excellent prospect of finding ore bodies. It is further inferred that larger-scale porphyry copper-molybdenum ore bodies are formed in the deep rock body. This study proves that the EH4 is an effective geophysical method for finding concealed rock (ore) bodies in the Dongxuofang copper-molybdenum polymetallic mine or this type of deposit. [ABSTRACT FROM AUTHOR]

The Wulong gold deposit (> 80 t Au) is located at the northeastern margin of the North China Craton (NCC). Gold in the most economically important quartz veins (Stages 2 and 3) is associated with a varied assemblage of Bi and Te minerals. Stage 2 is characterized by, in a temporal order, native gold-native bismuth-maldonite-hedleyite, bismuthinite-Bi-sulfotellurides, electrum-hessite-Bi-Pb-Ag sulfosalts, Bi-Pb sulfosalts, and Bi-Pb-sulfotellurides. All of these minerals except maldonite, electrum, hessite, and Bi-sulfosalts are present in Stage 3 veins, which also contain jonassonite and unnamed minerals with stoichiometry of Bi8Te3 and Bi5Te3. These complex Bi mineral assemblages resulted from changes in Pb, Ag, Te and Bi concentrations in reduced hydrothermal fluids both locally and temporally, from Stage 2 to 3. Texturally, approximately 85% of the gold grains are associated with almost all Bi minerals in each main-stage mineralization. Quartz-vein ores from Stages 2 and 3 have high Bi concentrations (up to 7332 ppm) and show a positive correlation between Bi and Au, with Bi/Au ratios > 10. These textural and geochemical associations, together with the occurrence of numerous droplet-like blebs and small inclusion trails of native bismuth and Bi-tellurides with native gold, maldonite, or jonassonite, suggest that Bi-rich melts may have formed from the hydrothermal fluids of Stages 2 and 3, and acted as an Au scavenger in a complex Bi-Au-Pb-Ag-Te system. Hence, the intimate association of Bi and Au at Wulong is the result of Au enrichment via the liquid bismuth collector mechanism. Unlike Wulong, however, other deposits in the NCC, such as Yangzhaiyu (Xiaoqinling district), Guilaizhuang (Jiaodong district) and Dongping (Jidong district), are characterized by low Bi concentrations, and are much richer in Te than Bi, so these systems could not generate low-melting point Bi-rich polymetallic melts. The low-sulfur Bi-Au-Pb-Ag-Te association at Wulong is consistent with that observed in reduced intrusion-related gold systems elsewhere and suggests that hydrothermal fluids may have been derived from the co-located Early Cretaceous diorite-granite porphyry dyke swarm. [ABSTRACT FROM AUTHOR]

The Shuangqishan Au deposit (>15 t) is located in the Dehua‐Youxi‐Yongtai goldfield of the southeastern Cathaysia Block, South China. There are three stages of granites in the Shuangqishan Au deposit, the pre‐mineralization granite porphyry formed in the Middle Jurassic (~166.0 ± 0.8 Ma), the metallogenic granite porphyry and monzonite porphyry formed in the late stage of the Late Jurassic (153–151 Ma), the post‐mineralization granites (granite porphyry, the masanophyre, the dioritic porphyrite) formed in the Early Cretaceous (129.0–120.0 Ma). All rocks are characterized by high‐K calc‐alkaline and shoshonities series, the per‐mineralization granites are enriched in Rb, Th, K, Zr, and Hf, depleted in Ba, P, and Ti, significant negative Eu anomaly and distinctly tetrad effect with highly fractionated I‐type granitoids characteristics. The metallogenic granites and the post‐mineralization granite porphyry are enriched in K, Rb, Th, Ce, Zr, Hf, and Y, enriched in LREE, strongly depleted in Sr, Ba Ta, P, Ti, have moderate negative Eu anomalies with I‐type granites characteristics. However, the post‐mineralization dioritic porphyrite displays strong depletions Sr, Ta, P, and Ti whereas Rb, Th, Ce, and Sm are enriched, enriched in LREE with weakly negative Eu anomalies. The metallogenic granite porphyry is significantly enriched in Au, As, Sb, W, Mo, and Bi, especially enriched in Au. The Lu‐Hf isotopic data indicate that the magma source comes from the partial melting of the Paleoproterozoic crust, the minor part from the mantle in the Early Cretaceous. Therefore, we propose that the granitoids formed in the subducted plate environment from the Middle Jurassic to the Early Cretaceous, the Late Jurassic I‐type granites (~153–146 Ma), The Shuangqishan Au deposit was formed in the stage from compression to extension, the Early Cretaceous granites (~129–114 Ma) mainly formed in the extensional environment and destroyed gold ore bodies. [ABSTRACT FROM AUTHOR]

Fluorite is a widespread mineral in porphyry and hydrothermal vein Mo-polymetallic deposits. Here, fluorite is utilised as a probe to trace the fluid source and reveal the fluid evolution process in the Chalukou giant Mo (Pb–Zn) deposit, Northeast China, which is characterised as early porphyry Mo and later vein-style Zn–Pb mineralisation. A detailed rare earth element (REE) and Sr–Nd isotope study of fluorite combined with Sr isotopes of sphalerite is conducted for the Chalukou deposit. The chondrite-normalised REE patterns of fluorites from molybdenite veins show light REE (LREE)-enriched patterns, with negative Eu anomalies (δEu = 0.60) and weakly negative Y anomalies (Y/Y* = 0.72). The fluorites associated with sphalerite veins exhibit rare earth element (REE)-flat patterns with negative Eu anomalies (δEu = 0.65 to 0.99) and positive Y anomalies (Y/Y* = 1.37 to 3.08). In addition, during the progression from Mo to Zn–Pb mineralisation, the total concentration of REEs decreases from 839 ppm to 53.7 ppm, and Y/Ho ratios increase from 22.1 to 92.5. These features may be explained by the different mobilities of REE complexes during fluid migration. The Eu anomalies are considered to be inherited from source fluids. All the initial 87Sr/86Sr ratios of fluorite and sphalerite are between those of ore-forming porphyries and wall rocks (rhyolite), with fluorite ratios ranging from 0.706942 to 0.707386 and sphalerite ratios varying from 0.705221 to 0.710417. The majority of εNd(t) values of fluorite varying from −6.4 to −3.6 are also located between the ratios exhibited by ore-forming porphyries and rhyolite, whereas three εNd(t) values of fluorites ranging from −0.26 to 0.36 are close to those of ore-forming porphyries. All the isotopic features indicate that the Sr-Nd isotope ratios of hydrothermal fluid are derived from porphyries and disturbed by fluid–rock reactions. Together with a two-stage Sr–Nd isotope mixing model, we suggest that different sources and fluid–rock interactions (syn-ore intrusions and strata) finally influence the Sr–Nd isotopes of the ore-forming fluids, which are recorded by the majority of fluorite and sphalerite. [ABSTRACT FROM AUTHOR]

The Tudigou porphyry Cu deposit is located in the central part of the southern Qinling belt. Copper mineralization is closely associated with monzogranite porphyry. Zircon LA–ICP–MS U–Pb dating of monzogranite porphyry suggests that the ages of magmatism at Tudigou vary between 150 ± 1 and 148 ± 1 Ma and overlap with the molybdenite Re–Os age of 150–148 Ma, indicating that the Tudigou intrusion and associated mineralization formed during the Late Jurassic. The enrichment in large‐ion lithophile elements, depletion in high‐field‐strength elements, high Ba/Th and La/Yb ratios, and negative correlation between Dy/Yb and La/Sm ratios, together with narrow ranges of εHf(t) values (εHf(t) = −4.0 to +1.4) suggest monzogranite porphyry was derived from a metasomatized lithospheric mantle with minor crustal components contribution, which is also evidenced by the lead isotopic result. The La/Yb ratios of 30 Mesozoic plutons in the southern Qinling belt were used to calculate the Moho depth, which suggests that the magmatism and mineralization in the region occurred during lithosphere thinning in response to the tectonic transition from compression to extension transitional regime. The calculated oxygen fugacity of the Late Mesozoic porphyry deposits in the Qinling–Dabie orogen have identical ΔFMQ values (averaging +1.4 to +2.4). However, the V/Sc ratios (the proxy for water content) are distinct among different deposit sizes, indicating that the dissolved water in the magma plays a critical role in porphyry‐type mineralization. [ABSTRACT FROM AUTHOR]

Porphyry-type Mo deposits have supplied most of the Mo to the world. However, the source of the Mo and the controls on its enrichment in such deposits is still a matter of great debate. In this study, we present in situ trace element and isotopic data for a giant porphyry Mo deposit (the Chalukou Mo deposit in NE China) and use these data to address these issues. Three primary paragenetic stages of mineralization were recognized at Chalukou: (Stage I) K-feldspar+quartz + minor pyrite (Py-I) + minor molybdenite (Mol-I); (Stage II) quartz + sericite + molybdenite (Mol-II) + pyrite (Py-II); (Stage III) quartz + chlorite + epidote + fluorite + pyrite (Py-III) + galena + sphalerite + minor chalcopyrite. The bulk of the molybdenite was deposited in Stage II. In situ S isotope analyses of the sulfide ores show that the S34S values vary from -5.2 to +7.8%o (mean = +2.9%o) and correspond to S34SH2S values from -2.4 to +3.3%o (mean = +1.1%o). These values are consistent with a magmatic source for the sulfur. In situ Pb isotope compositions of the sulfide ores are almost identical to those of the local Mesozoic granites and other magmatic-hydrothermal ore deposits in this region, suggesting a close genetic association between the Mo mineralization and felsic magmatism. Pyrite from the three stages of mineralization differs significantly in its trace element composition. The first generation, Py-I, has a high Cu content (8.7 ± 49.6 ppm; where the first value is the median and the second is the standard deviation) and Mo content (6.9 ± 3.8 ppm). Pyrite-II has the lowest Cu concentration (1.3 ± 2.1 ppm) and a relatively high Mo concentration (5 ± 128 ppm), and Py-III has a high Cu content (8.7 ± 37.1 ppm) but the lowest Mo content (0.05 ± 5.7 ppm). From this, we infer that pyrite recorded the chemical evolution in the Mo/Cu ratio of the ore fluid and that this ratio reached a maximum in Stage II, coinciding with the widespread saturation of the fluid in molybdenite. The evolution of the Mo/Cu ratio in pyrite implies that the fluid was undersaturated in chalcopyrite at the high temperature of Stage I, despite the Cu concentration of the fluid apparently being at its high level, and chalcopyrite only saturated later, at a lower temperature. Molybdenite, however, because of its lower solubility, saturated early (Stage I) and in the subsequent stage (Stage II) was supersaturated in the fluid. There is a significant enrichment of Mo in the syn-ore intrusions at Chalukou compared to the pre-ore monzogranite. The very low Sr/Y ratios for the Chalukou syn-ore intrusions, which are in sharp contrast to the high Sr/Y ratios of the pre-ore monzogranite and those of porphyries related to Cu deposits, suggest that fractional crystallization of plagioclase may have been a key factor in generating the syn-ore magmas. Molybdenum is a highly incompatible metal and will concentrate in the crust, and assimilation of old continental crust, therefore, may explain the Mo enrichment of the syn-ore intrusions and ultimately the formation of the giant Chalukou deposit. [ABSTRACT FROM AUTHOR]

Magmatic sources of porphyry deposits in postcollisional settings remain controversial. We have used new and published petrological and geochemical data for the Eocene–Oligocene porphyry Cu ± Mo ± Au deposits in the Sanjiang region, SW China, to address this outstanding issue. New data for three deposits (Machangqing, Tongchang, and Beiya) in the Ailaoshan–Red River porphyry Au-Cu-Mo belt (southern part of the Sanjiang region) suggest that ore-forming porphyries were emplaced at ~ 35 Ma, have high (87Sr/86Sr)i (0.7068–0.7071) and negative εNd(t) (− 6.9 to − 5.0), low zircon εHf(t) (− 5.3 to 4.5), and relatively high δ18O (5.9–9.0‰). Magmatic amphibole phenocryst compositions indicate that the parental magmas are all relatively oxidized (ΔFMQ = 1.7 ± 0.6), and H2O-rich (3.8 ± 0.3 wt% H2O). These results are consistent with those estimated from zircon compositions (ΔFMQ = 1.8 ± 0.8) and high whole-rock Sr/Y ratios (75 ± 31), respectively. Based on the new and published data, we suggest that the parental magmas for the Ailaoshan–Red River porphyry Au-Cu-Mo belt were derived from a preserved juvenile arc lower-crust and the underlying metasomatized subcontinental lithospheric mantle (SCLM) attributed to a Neoproterozoic subduction event, whereas the parental magmas for the Yulong porphyry Cu-Mo belt (northern part of the Sanjiang region) originated from the Permian–Triassic juvenile arc lower-crust and metasomatized SCLM. Additionally, parental magmas for these porphyry deposits are all oxidized and H2O-rich, and we attribute such characteristics to inheritance from mixed mantle-crust sources that were modified by previous oceanic slab subduction. [ABSTRACT FROM AUTHOR]

We proposed a stepwise procedure to obtain a multiscale 3-D resistivity model beneath the Caosiyao porphyry Mo deposit. Due to the joint inversion of data collected from 302 audio-frequency magnetotelluric and 33 broad-band magnetotelluric sites, this model can simultaneously combine both the shallow resolution and detection depth. The near-surface part of the model reveals the high-resolution structures. Specifically, a high-resistivity body (>500 Ω m) is interpreted as the late Jurassic porphyry intruding into the metamorphic basement. Two NE-trending high-conductivity (<100 Ω m) belts are interpreted as fault zones. The one in the southeast extends deeply (>15 km) is suggested to be a crust-scale weak zone and conduit for transporting ore-forming magmas and fluids. The other one is shallow (<2 km), but coincides with outcropped orebodies and alteration zones, so it may have played an important role in the hydrothermal alteration and mineralization. A predominant high-conductivity block (<30 Ω m) occurs within the lower part (∼15–30 km) of the model and connects with Caosiyao deposit through the inferred crust-scale fault. Its enhanced conductivity may result from the abundant fluids. We determined it had been a mid-lower crustal magma chamber providing space for the mixing of ore-forming magmas and fluids, as well as the element exchange during the mineralization. Combined with a previous magnetotelluric imaging, we suggested the heats and fluids needed for the mineralization might have been transported from a giant upper-mantle basaltic magma reservoir as indicated by a conductor beneath the Datong volcanic area through a lithosphere-scale shear zone. Summarily, the multiscale resistivity model provides us a chance to depict the multiscale metallogenic system for the Caosiyao porphyry Mo deposit from the aspect of electrical resistivity. [ABSTRACT FROM AUTHOR]

The Tuwu-Yandong porphyry Cu belt is located on the southern margin of the Dananhu island arc in eastern Tianshan, constituting the largest Cu metallogenic belt in Northwest China. Two episodes (~334 Ma and ~317 Ma) of porphyry Cu-Mo mineralization in the belt have been recognized, associated with Early and Late Carboniferous felsic intrusions, respectively. The Carboniferous intrusions, therefore, provide a unique opportunity to investigate tectono-magmatic-metallogenic evolution of the belt. New LA–ICP–MS zircon U–Pb dating indicates that the mineralization-related and post-mineralization intrusions (granodiorite porphyry, gabbro, and granite porphyry) were formed at 321.8 ± 3.1 Ma, 313.5 ± 1.2 Ma, and 309.8 ± 2.5 Ma, respectively. The zircon trace element shows that the granodiorite porphyry (Ce4+/Ce3+ ratios, avg. 129, median = 112, n = 15) was likely derived from a more oxidized (and hydrous) magma source than that of the gabbro (Ce4+/Ce3+ ratios, avg. 74, median = 40, n = 15) and granite porphyry (Ce4+/Ce3+ ratios, avg. 100, median = 91, n = 15), being favorable for porphyry copper mineralization. The granodiorite porphyry shows an adakitic affinity (e.g., high Sr/Y ratios and low Y contents) and has high εNd(t) (6.4–6.7), εHf(t) (11.4–14.3), and Mg# values (47.4–58.1) and low (87Sr/86Sr)i (0.703804–0.703953), suggesting that the melt was derived from partial melting of a subducted oceanic slab followed by mantle peridotite interaction. The gabbro exhibits higher Al2O3 (16.5–17.4 wt.%), Cr (107–172 ppm), and Ni (37–77 ppm) contents and εNd(t) (6.6–7.2), εHf(t) (11.6–15.9), and Mg # (53.3–59.9) values, while it has lower (87Sr/86Sr)i values (0.703681–0.703882) than the granodiorite porphyry, indicating a depleted mantle source. The granite porphyry exhibits an affinity with non-fractionated I-type granites and possesses higher SiO2 (71.1–72.0 wt.%) contents, lower but positive εNd(t) (4.8–5.2), εHf(t) (10.3–13.0), and Mg # (38.7–41.0) values, and higher (87Sr/86Sr)i (0.704544–0.704998) than the granodiorite porphyry and gabbro, together with young Nd and Hf model ages, suggesting that the parental magmas originated from the partial melting of a juvenile lower crust. The enrichment in LREEs and LILEs (e.g., Ba, U, K and Sr) and depletion in HFSEs (e.g., Nb, Ta, and Ti) indicate that these intrusive rocks formed in the subduction zone. With the integration of previous studies, it can be inferred that the northward flat subduction of the Kangguer ocean slab at ca. 335–315 Ma caused the formation of the adakites and associated porphyry Cu mineralization in the Tuwu-Yandong belt. After the prolonged flat subduction, slab rollback may have occurred at ca. 314–310 Ma, followed by a "quiet period" before the final closure of the ancient Tianshan Ocean along the Kangguer Fault in this belt. [ABSTRACT FROM AUTHOR]

Early Paleozoic subduction beneath peri-Gondwana microcontinents formed a major Proto-Tethys magmatic arc system. Appinite suite rocks constitute important components within that magmatic arc. Herein, we report hornblende 40Ar/39Ar and zircon U–Pb geochronology data, zircon Hf isotope, mineral chemistry, whole-rock geochemistry, and Sr–Nd–Pb isotope data for the rocks of hornblende gabbro-diorite-quartz diorite-quartz monzodiorite from the Renda appinite suite and adjacent granite porphyry in the southeastern Qilian Orogen. Hornblende 40Ar/39Ar and zircon U–Pb isotopic data constrain ages of the intrusions of the Renda appinite suite to 439–435 Ma. Rocks in this suite represent the calc-alkalic to alkali-calcic series, and they are enriched in large-ion lithophile elements and depleted in high-field-strength elements. The hornblende gabbros exhibit moderate initial 87Sr/86Sr ratios (0.7046–0.7055) and higher whole-rock εNd(t) (–1.3 to +1.7) and zircon εHf(t) (+7.2 to +11.2) values relative to the other rocks of the suite (0.7047–0.7064, – 7.7 to – 1.1, and – 6.6 to +6.8, respectively) as well as Pb isotopic features similar to EM2 lithospheric mantle. These geochemical characteristics suggest that the Renda appinite suite originates from partial melting of an enriched lithospheric mantle, with subsequent fractional crystallization and hybridization with crustal components. The granite porphyry formed by partial melting of the crust coeval with the emplacement of juvenile magma. This study suggests emplacement occurred during a short-lived collision with slab failure (breakoff) after latest stage (cessation) of Proto-Tethys oceanic subduction along the northern side of the southeastern Qilian Orogen. The heat supplied by the asthenospheric upwelling through a gap in the subducted slab induced melting in lithospheric mantle and deep crust producing Renda appinite suite rocks and granite porphyry. [ABSTRACT FROM AUTHOR]

• Recognition of two distinct stages of A-type magmatism at 1.65 Ga and 1.60 Ga in the North China Craton. • Geochemical and isotopic compositions of the two stages A-type granites indicate gradual crustal extension and asthenosphere upwelling processes. • Tectonic transition from post-orogenic to anorogenic settings took place at the late Paleoproterozoic. Paleoproterozoic and Mesoproterozoic A-type granites occur on many cratons and possess important information for our understanding of the formation and breakup history of the supercontinent Columbia. It was argued previously, that Proterozoic A-type granites (∼1.8–1.5 Ga), exposed along the southern margin of the North China Craton formed in a post-collisional or anorogenic setting related to the final amalgamation of the North China Craton or to the breakup of Columbia. In the present study, we report zircon ages and geochemical data of the Maping A-type granite. This intrusion consists of a quartz monzonite porphyry and a granite porphyry that, based on U-Pb age dating, formed at ∼ 1.65 and ∼ 1.60 Ga, respectively. The granites show high contents in alkaline and high field strength elements, high Ga/Al and Fe/Mg ratios. The quartz monzonite porphyry of the early stage is metaluminous and relatively depleted in Hf-Nd isotopic compositions (whole-rock initial ε Nd values −5.4 to −4.5; zircon initial ε Hf values −8.5 to −1.5), while granite porphyry of the late stage is peraluminous and has lower initial ε Nd and ε Hf values (−6.4 to −5.9; −9.6 to −3.3). Inherited zircon grains in the Maping intrusion have relatively high initial ε Hf values (>-0.7), likely originating from juvenile crust. The Pb isotopes of the quartz monzonite porphyry show characteristics similar to the lower crust, whereas the granite porphyry has more radiogenic Pb isotopic compositions. Apatite grains from the quartz monzonite porphyry have initial 87Sr/86Sr ratios of ∼ 0.7109–0.7133 and those from the granite porphyry have noticeably high initial 87Sr/86Sr ratios of ∼ 0.7862–0.8812. These isotopic characteristics imply the presence of various crustal rocks underneath the North China Craton with variable isotopic compositions. From the early to late magmatic stages, the Sr/Y ratios of granitic rocks decrease from 1.6 – 7.6 to 0.2–0.4, while the estimated magma temperatures, calculated from whole-rock compositions, slightly increase from approximately 900 °C to about 930 °C. These concurrent changes in temperature and chemical composition reflect ongoing asthenospheric mantle upwelling during crustal extension. This suggests a transition in the southern margin of the North China Craton from a post-collisional setting before 1.65 Ga to an anorogenic setting by 1.6 Ga. [ABSTRACT FROM AUTHOR]

The Xiaoxi’nancha porphyry Au-Cu deposit is located in Yanbian, Jilin Province, NE China. Gold-Cu mineralization is mainly associated with chlorite-sericite alteration. The 40Ar/39Ar age of pre-mineralization hydrothermal biotite in potassic alteration defines a relatively well-defined cluster at ~ 111 Ma to 114 Ma with a total fusion age of 112.0 ± 0.3 Ma. In-situ secondary-ion mass spectrometry U-Pb dating of hydrothermal titanite occurring with chalcopyrite yielded an intercept age of 109.0 ± 2.4 Ma. The similarity between the biotite and titanite formation ages suggests a mineralization age of ~ 110 Ma. Chlorite, quartz and apatite coexist in equilibrium and are closely related to mineralization. The Al-in-chlorite geothermometer indicates a formation temperature of 236–351℃ (mean 309℃), and the quartz-apatite pair yielded an average formation temperature of 306℃. The in-situ δ34S compositions of sulfide have restricted and slightly positive values (pyrite 2.3 to 3.9‰, chalcopyrite 1.6 to 3.8‰ and molybdenite 2.3 to 3.7‰). The fluid δ18O values, calculated assuming quartz-fluid equilibrium, vary from 2.4 to 5.5‰ (average = 4.0‰). Therefore, the ore-forming hydrothermal fluids were of moderate-temperature with predominantly magmatic characteristics. Apatite exhibits distinct variations in structure and composition, and slight variations in oxygen isotopic composition. The areas in apatite with dark BSE textures are characterized by lower δ18O values, Cl contents and temperatures and higher F contents, consistent with the result of water–rock interaction rather than mixing with meteoric water. The water–rock interaction and its resulting cooling, can reduce the metal solubility, likely triggering mineralization at Xiaoxi’nancha. [ABSTRACT FROM AUTHOR]

[Display omitted] • Zircon U-Pb ages indicate late Carboniferous to early Permian magmatic activity. • Dabate intrusions originate from melting of lower crust mixed with mantle materials. • The intrusions are A 2 -type granites formed in post-collision extensional environment. The Dabate deposit in the West Tianshan Orogenic Belt is a large porphyry Mo-Cu deposit with obvious zoning feature. The Dabate pluton is closely related to mineralization associated with the rhyolite and granite porphyries. Copper (Cu) mineralization occurs on the margin of the rhyolite porphyry, and molybdenum (Mo) mineralization occurs in the interior of the rhyolite porphyry. Petrology, zircon U-Pb isotopic data, whole-rock geochemistry, and Sr-Nb-Hf-Pb isotopic data of the rhyolite and granite porphyries in the Dabate Mo-Cu mining zone and to discuss the properties, sources, evolution, and tectonic environment of the magma. Zircon U-Pb age dating shows that the rhyolite porphyry and granite porphyry were formed in 300.1 ± 1.3 Ma and 290.4 ± 5.2 Ma, respectively, and they are geochemically similar. Both are characterized by negative Eu anomalies (δEu = 0.09–0.15 and 0.10–0.11, respectively) and are slightly rich in light rare earth elements (LREE) but depleted in high-field-strength elements (HFSE), which indicates that they are both A 2 type granites that underwent high differentiation. The Sr isotope (I Sr) values for the rhyolite and granite porphyries range from 0.70564 to 0.70658 and 0.70833–0.70954, respectively. The Nd isotopic composition [ε Nd (t)] values for both are negative but close to zero (−0.25 to −0.46 and −0.65 to −1.10, respectively), and the two-stage depleted mantle Nd model ages (T DM2 (Nd)) are 1.07–1.10 Ga and 1.11–1.14 Ga, respectively. Zircon ε Hf (t) values are 7.29–11.97 and 6.26–11.08 for rhyolite porphyry and granite porphyry, respectively, and the two-stage Hf model ages (T DM2 (Hf)) are 550–848 Ma and 605–916 Ma, respectively. The initial Pb isotope ratios for the rhyolite and granite porphyry are close at (206Pb/204Pb) i = 18.26–18.65, (207Pb/204Pb) i = 15.54–15.64, and (208Pb/204Pb) i = 38.19–38.57. These results indicate that the two porphyries have a mixed source, likely originating from the partial melting of mantle blended with some recently formed lower crust material. The geochronology, geochemistry, and Sr-Nd-Hf-Pb isotope data of existing intrusions in the West Tianshan imply that the Late Carboniferous to Early Permian Dabate area was underplated in a post-collisional extensional setting, and A 2 -type granite intrusions with related Mo-Cu mineralization were formed. [ABSTRACT FROM AUTHOR]

Porphyry Mo deposits have traditionally been classified into two major classes, arc-related and Climax-type, based on the tectonic setting and chemistry of associated intrusions. Although there is a consensus that porphyry Mo systems were formed by the optimal coincidence of geological processes operating at different scales, it is unclear what key parameter(s) render systems productive and whether the two classes of porphyry Mo deposits are unique in their mode of formation, or if they share fundamentally similar geological processes. These questions are important as a clearer understanding of the optimum conditions for the formation of porphyry Mo deposits is a prerequisite for more efficient exploration. This contribution presents a detailed assessment of the factors affecting the formation of porphyry Mo deposits through the investigation of barren and mineralized intrusions from the arc-related Songbei-Yangjiazhangzi-Lanjiagou (SYL) ore zone and the Climax-type Hashitu deposit of northeastern China. Our results show that the syn-mineralization intrusions from the SYL ore zone are quite evolved (SiO2 ~ 75 wt%; Na2O+K2O ~ 8.7 wt%) and are characterized by apparent light rare earth element (LREE) enrichments (LaN/YbN = 2.7–33.1) and moderate negative Eu anomalies (Eu/Eu* = 0.4–0.7). They show enriched zircon Hf isotopic compositions [εHf(t) = –11.9 to –4.8], indicating their parental magmas were likely derived from an ancient crustal source. Melt inclusions from the SYL syn-mineralization intrusions contain negligible F and Cl. In contrast, Hashitu syn-mineralization intrusions are characterized by weak LREE enrichments (LaN/YbN = 2.2–6.9) and strong negative Eu anomalies (Eu/Eu* = 0.02–0.10), with SiO2 and Na2O+K2O contents similar to the SYL syn-mineralization intrusions. They show depleted zircon Hf isotopic compositions [εHf(t) = 3.1–5.0], indicating their parental magmas were likely derived from a juvenile crustal source. Melt inclusions from the Hashitu syn-mineralization intrusions contain up to 0.4 wt% F and 0.03 to 0.09 wt% Cl. However, in both cases, the syn-mineralization intrusions are Mo-poor (1–7 ppm Mo), oxidized (above the quartz-fayalite-magnetite buffer), water-saturated (4.4–7.8 wt% H2O), and were emplaced at palaeodepths of 3.3 to 8.3 km. These data imply that magma source composition is not a key factor in the formation of porphyry Mo deposits. In contrast, magma oxygen fugacity, water content, and emplacement depth appear to play fundamental roles in the formation of porphyry Mo deposits of both arc-related and Climax-type. Within individual deposits, no systematic differences between pre- and syn-mineralization intrusions are observed in terms of magma source, fractionation degree, oxygen fugacity, emplacement depth, and volatile and Mo contents. Instead, a crucial apparent difference lies in the geometry of the intrusions, i.e., pre-mineralization intrusions generally occur as flat, ponded bodies, whereas syn-mineralization intrusions commonly develop as small stocks or dikes. Our results, in combination with an examination of other porphyry Mo systems, suggest that the sudden depressurization of magma chambers and subsequent venting of voluminous fluids along focusing structures (such as small stocks or dikes) most likely plays a critical role in the formation of porphyry Mo deposits of both arc-related and Climax-type. The findings of this study indicate that fluid processes in the shallow crust are pivotal for the formation of porphyry Mo deposits and that settings with ideal magmatic-hydrothermal architectures are most likely to develop into productive porphyry Mo systems. [ABSTRACT FROM AUTHOR]

The Late Carboniferous to Early Permian tectonic evolution of the South West Junggar (SWJ), northwest China, a crucial constituent in the southwestern domain of the Central Asian Orogenic Belt (CAOB), has long been the subject of debate. Here, detailed petrographic studies, new nine LA-ICP-MS zircon U-Pb ages and forty-nine whole-rock geochemical results from six granitic plutons in the SWJ were combined with previously available data to elucidate their petrogenesis and re-decipher Late Palaeozoic tectonic evolution and accretionary process of the southwestern CAOB. The studied granites can be geochemically classified as I- and A-type granites, and the former is further subdivided into I-type and highly fractionated I-type granites. The calc-alkaline I-type amphibole-bearing granites (Group I) yield crystallization ages of ca. 317–315 Ma, and exhibit depletions in HFSEs and enrichments in LILEs with no to slight Eu anomalies and low zircon saturation temperatures, indicating that the formation of these granites may be closely related to the subduction of the Junggar oceanic slab. The Group II granite porphyries (ca. 312 Ma) contain negligible amphibole, and are characterized by evolved SiO2 but low zircon saturation temperatures with sharply negative Eu, Ba, Nb, Ta, Sr, P and Ti anomalies, belonging to highly fractionated I-type granites, and were probably produced in a tectonic transition from compressional to extensional setting. In contrast, the latest Carboniferous (ca. 304–298 Ma) alkaline A-type granites (Group III) are amphibole-absent, and are similar to Group II granites in major element compositions, but exhibit higher zircon saturation temperatures, indicating that they probably resulted in a back-arc extensional setting triggered by roll-back of the subducting Junggar oceanic slab since ca. 310 Ma. In combination with regional geology and re-interpretation of previous data, a multi-stage subduction-accretion model is suggested to account for the Late Palaeozoic tectonic evolution of the southwestern CAOB. This model can plausibly interpret the differences in duration of subduction between the northern and southern domains of West Junggar and the coexistence of A-type granites with subduction-related sanukites in the SWJ during Carboniferous to Permian. [ABSTRACT FROM AUTHOR]