Search

The paper presents the first isotopic U–Pb study data (LA–ICP–MS method) of zircon from intrusive rocks of the Molo-Sarychat pluton situated along the deep-seated fault system of the "Nikolaev Line" in the eastern Kyrgyzstan. The intrusive rocks from this pluton belong to the high-potassic calc-alkaline to shoshonitic series. Intense Mo(–W–Cu–Au) (mainly molybdenum-porphyry) mineralization is spatially and genetically associated with this pluton. Together with the other Au, W and Cu deposits and occurrences, this mineralization is part of the extended metallogenic belt of Tien Shan; however, occurrences of molybdenum-porphyry mineralization are still rare in this belt. The concordant isotopic U–Pb ages of zircon autocrysts indicate the crystallization of quartz monzonite (293.3 ± 4.2 Ma) and monzogranite (286.6 ± 2.4 Ma) in the Early Permian. Zircon antecrysts dated at 306–320 Ma are also present. The crystallization age obtained corresponds to a post-collisional epoch of the development of this territory but the presence of the antecrysts expands the pluton emplacement to the Late Carboniferous-Early Permian, which, as a result, spanned over initially subduction-related and then post-collisional tectonic settings. Correspondingly, a post-collisional setting of the Mo(–W–Cu–Au) (molybdenum-porphyry) mineralization is established; it is related to the pluton studied and was formed after the emplacement of quartz monzonite (early stage) and monzogranite (late stage). Significant enrichment in Mo can be related to its progressing accumulation during magmatic differentiation causing the emplacement of quartz monzonite and especially monzogranite. These processes occurred under the more mature post-collisional tectonic regime, with possible formation of intermediate magma chambers in the Paleoproterozoic metamorphic rocks and ancient granitoids. The age dates determined for rocks from the Molo-Sarychat pluton are similar to those identified for the igneous and metasomatic rocks of the large Kumtor gold deposit that is also associated with the "Nikolaev Line." [ABSTRACT FROM AUTHOR]

The subduction-related Sunda-Banda arc hosts several giant and major Cu–Au–Mo porphyry and epithermal Au systems, making it one of the most important magmatic-related metallogenic belts in Indonesia. They are accompanied by a number of smaller systems, one of which is the recently discovered Randu-Kuning porphyry Cu-Au deposit on Java Island. The present study investigates the geochemical characteristics of this deposit through whole-rock and mineral geochemistry and mineral geothermobarometry, focusing on three sequential dioritic intrusions that make up the host igneous complex, two barren and the third mineralized. Moreover, a comparative analysis is performed between other porphyry deposits in the Sunda-Banda arc and with Grasberg in Papua. This study shows that the older porphyry deposits have mostly similar geochemical characteristics to the younger deposits, suggesting the same magma source, which is mantle-derived oxidized I-type magma. Amphibole geothermobarometry shows that the formation of syn-ore intrusion in the older porphyry was higher in temperature and pressure than those at the younger porphyry. The halogen and oxygen fugacities inferred from biotite and amphibole chemistry indicate an oxidized, water- and halogen-rich melt. Our study shows that combining amphibole and biotite chemistry and whole-rock geochemical data is useful to fingerprint the magmatic-hydrothermal processes, especially where multiple magmatic phases occur. This research also provides valuable insights into the magmatic-hydrothermal physiochemical conditions during the formation of the mineralized system. [ABSTRACT FROM AUTHOR]

Copyright of Geology & Exploration is the property of Geology & Exploration Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Zircon is a common, widely distributed accessory mineral in most igneous rocks and its refractory nature records magmatic evolution in terms of oxygen and U-Th-Pb isotopes, and trace-element contents all of which reflect the intrinsic physio-chemical evolution of the magmatic systems in which it crystallized. Zircon compositions can be used as an indicator of relative fertility of hypabyssal intrusions in terms Cu ± Mo ± Au porphyry mineralization. To further characterize syn-to post-collisional adakitic Devonian oxidized I-type granitoids in the New Brunswick (specifically, those with Cu ± Mo ± Au porphyrystyle mineralization), LA-ICP-MS analyses (guided by µXRF-EDS mapping and SEM-BSE imaging of polished thin sections) of zircons from 13 granitoids was conducted. The zircons studied were similar in terms of their textures (homogenous cores, patchy zoning, oscillatory zoning, and some unzoned zircon); however, they have a wide range of trace- and minor-element (Hf, HREE, Y, Th, U) compositions. Specifically, Zr/Hf ranges between 24-60, whereas Th/U ranges between 0.15 and 5.37. The presence of inherited zircon affects the concentrations of Th and U, as well as other key elements. Estimated crystallization temperatures of granitoids, ranging from 737 to 899°C, were calculated via Ti-in-zircon geothermometry assuming reduced TiO[sub 2] and SiO[sub 2] activities. The calculated log fO2 values for zircons from some of these granitoids indicate a highly oxidized magmatic signature. Zr/Hf, Eu/Eu*, and (Eu/Eu*)/Y in zircon, as well as zircon (Ce/Nd)/Y are some of the best indicators of porphyry fertility. The Ce/Ce* in zircon exhibit a large range (1.1-590), with higher Ce/Ce* reflecting more metallogenically favourable oxidizing conditions. If Eu/Eu* in zircon is ≥0.4 (relatively oxidized conditions), it indicates a high potential for an ore-forming porphyry Cu mineralizing system. Lower Eu contents reflect relatively reducing conditions, as Eu anomalies vary with oxygen fugacity as well, and the relative abundance of Eu2+ is higher, but does not substitute into the zircon lattice. The evidence extracted from analyzing the zircon composition within New Brunswick's I-type granitoids indicates the fertility of these hypabyssal intrusions. [ABSTRACT FROM AUTHOR]

The Kirazlı deposit is located at the center of the Biga Peninsula metallogenic province, in a geological setting characterized by an extensional tectonic environment. A NNW-SSE trending high-sulfidation (HS) orebody with a total reserve of 33.86 Mt @ 0.69 g/t Au and 9.42 g/t Ag lies beneath the Kirazlı Main zone. A porphyry Cu orebody hosted by Eocene intrusive and volcanic rocks has been intersected by drilling within its vicinity. The HS epithermal deposit is hosted by a partly silicified and brecciated Oligocene volcanic and volcaniclastic sequence consisting mainly of basaltic andesite lava flow and lithic/crystal tuff. Lithogeochemistry and zircon U-Pb radiometric ages allow us to distinguish three distinct high-K calc-alkaline magmatic events at ca. 41, 38, and 32 Ma, sourced by metasomatized mantle melts, which have interacted with the crust during their ascent. Porphyry Cu mineralization took place at 36.7 ± 0.4 Ma (muscovite 40Ar/39Ar age) with subsequent re-opening and base metal deposition. Crosscutting quartz-pyrite-molybdenite veins were emplaced at 33.6 ± 0.2 Ma (molybdenite Re-Os age), and followed by the HS epithermal Au-Ag event at ca. 31 Ma, based on a previous study. Our radiometric data indicate that the Kirazlı deposit has recorded a long-lasting Cenozoic magmatic and metallogenic evolution during about 10 Myr. Our study demonstrates that successive, independent, and overprinting, but genetically unrelated, HS epithermal precious metal, hydrothermal Mo, base metal, and porphyry Cu systems have been active at the same location during protracted extensional tectonics of the Biga Peninsula. [ABSTRACT FROM AUTHOR]

Chlorite is present extensively in many types of deposits. The mechanism underlying the chemical variations in chlorite remains unclear. The Naruo porphyry deposit is a giant copper porphyry deposit in the Duolong ore district of Tibet. Chlorite, which is abundant in this deposit, has yet to be studied systematically; hence, we used principal component analysis (PCA) to assess the correlation between chlorite elements and various types of mineral deposits. We then conducted a preliminary investigation into its mineralogy and geochemistry to better understand its formation process and identify potential prospecting indicators. The PCA method proved effective in discerning two distinctive element signatures within the chlorite and categorising them into four deposit types: orogenic Au deposits, granite-type U deposits, and skarn-type Sn deposits that exhibit high FeOand low MgO distinguishing them from porphyry copper deposits. The chlorite in the Naruo deposit is classified as either early metasomatic (M-type), consisting mainly of clinochlore, or late hydrothermal (H-type), primarily consisting of clinochlore and chamosite. This classification suggests that H-type chlorite formed in a reductive environment conducive to Cu precipitation at medium temperatures (255°C-342°C). Al-Si and Fe-Mg substitutions were found to be the primary processes involved in its generation. Additionally, from the mineralisation centre outwards, there was an observed decrease in Si content as well as the Fe/(Fe+Mg) ratio in H-type chlorite, along with decreases in temperature, sulphur, and oxygen fugacity of allchlorites; conversely, increases were observed for Al content along with Mg and Mn elements in H-type chlorite. Chlorite is useful for exploring porphyry copper systems as an indicator mineral. [ABSTRACT FROM AUTHOR]

The Chagai belt to the north of the Afghan block and the east of the Iranian block in the western part of Pakistan is known for occurrence of Oligocene to Miocene calc‐alkaline magmatic belt. The present study discusses the characteristics of episodic magmatic activities that contributed to mineralization for the Reko Diq porphyry complex in the western part of the Chagai belt. U–Pb dating of zircons from volcanic rocks of the Reko Diq porphyry complex yielded ages of 25.8 ± 1.8 and 12.29 ± 0.44 Ma for two phases of magmatic crystallization. Geochemical analyses of whole‐rock rhyolite and dacite indicate that the rock units are peraluminous calc‐alkaline, derived from Andean‐type subduction. The magma was formed due to partial melting of the thickened mafic lower crust in a continental arc setting in relation to the subduction of the Neotethys along the Makran subduction zone. The abundance of zircons, Hf, REE, U/Pb and Th indicates high degrees of magmatic evolution. Moreover, the Sr and Nd isotopic data indicate the fractional contribution of depleted N‐MORB mantle to the Reko Diq magmas through bulk mixing with magmas derived from the lower continental crust. Short‐lived magmatic systems repeated magma injection, and various episodes of hydrothermal fluid flow have led to the formation of porphyry mineralization. Emplacement of the Reko Diq porphyry complex and related Cu–Au mineralization is associated with a series of tectonic–magmatic events at different episodes of the Oligocene–Miocene times. [ABSTRACT FROM AUTHOR]

The Shuangyuangou copper deposit is located in the southern segment of the Qinling orogenic belt in central China. The ore‐related intrusions include quartz diorite porphyry, granite porphyry and lamprophyre. In this study, we present whole‐rock geochemistry, zircon U–Pb geochronology, trace elements and Lu–Hf isotope data on the Shuangyuangou intrusions which provide critical constraints on the emplacement age, magma origin, petrogenesis and implications for porphyry Cu mineralization in this newly discovered deposit. Zircon U–Pb dating constrains the emplacement age of quartz diorite porphyry, lamprophyre and granite porphyry at 150–147 Ma. The quartz diorite porphyry and granite porphyry display high‐K calc–alkaline I‐type granite affiliation. The rocks show enrichment of LREE and LILE (Rb, Ba), depletion in HREE and HFSE (Nb, Ta, Ti) and absence of Eu anomaly. Zircon εHf(t) values of quartz diorite porphyry, lamprophyre and granite porphyry range from −7.5 to −1.7 with TDM2 ages of 1.3–1.6 Ga. Our data suggest that the parental magma was derived from partial melting of juvenile lower crust and metasomatic lithospheric mantle, with more involvement of mantle material for the lamprophyre. The zircon Eu/Eu* values of 0.55–0.78 suggest high magmatic water content which suppresses the fractionation of plagioclase. In addition, the ΔFMQ values calculated from zircon trace elements range from −0.90 to 2.96 which is a favourable factor for porphyry Cu mineralization at Shuangyuangou. The Late Jurassic Shuangyuangou intrusion and associated Cu mineralization were formed within an intracontinental setting after the collisional assembly of the Qinling orogenic belt. [ABSTRACT FROM AUTHOR]

The Ulgen porphyry Mo deposit, recently discovered in the northeastern segment of the Derbugan metallogenic belt, NE China, is a large and hidden ore deposit. Investigation of this deposit provides insights into the geodynamic background and metallogenic mechanism of Mesozoic porphyry Mo deposits that are exposed elsewhere in NE China. The host rocks consist of muscovite monzonitic granite (MMG) and biotite granitic porphyry (BGP), which are intruded into Lower and/or Middle Jurassic intermediate-felsic volcanic-sedimentary rocks and pre-ore monzogranitic porphyry (MP). Zircon laser ablation-inductively coupled plasma-mass spectrometric (LA-ICP-MS) U-Pb age dating indicates that the MMG and BGP were emplaced at 144.9 Ma and 144.7 Ma, ca. 14 m.y. younger than the intrusion age of MP (159.3 Ma). Molybdenite Re-Os isotopic dating indicates that Mo mineralization occurred at 144.9 Ma, almost simultaneously with the 145 Ma magmatic activity. Geochemically, all of the Ulgen granitoids are enriched in large ion lithophile elements (e.g., Rb, Th, U, and K) and light rare earth elements, and are depleted in high field strength elements (e.g., Nb, Ta, and Ti). The pre-ore MPs belong to I-type granites with moderately negative Eu anomalies (Eu/Eu* = 0.62-0.65), whereas the syn-ore MMGs exhibit S-type affinity with pronounced negative Eu anomalies (Eu/Eu* = 0.29-0.39). The ore-forming BGPs display adakite-like geochemical features in terms of high-Sr, low-Y, and low-Yb contents, and slightly negative Eu anomalies (Eu/Eu* = 0.72-0.74). All intrusive rocks have relatively low initial (87Sr/86Sr)i ratios (0.7044-0.7055) and positive εNd(t) values (+1.15 to +2.65), positive εHf(t) values (+4.0 to +9.4), young two-stage Nd and Hf model ages (tDM2(Nd) = 841-731 Ma, tDM2(Hf) = 943-604 Ma), and moderate (206Pb/204Pb)i (18.300-18.402), (207Pb/204Pb)i (15.557-15.564), and (208Pb/204Pb)i (38.180-38.307) ratios. Therefore, it is most likely that these intrusive rocks originated from a mixture of two sources of magma derived from the mantle and juvenile lower crust, in which there were variable degrees of the fractional crystallization of ilmenite, apatite, and plagioclase. Rather than the partial melting of oceanic slabs, the fractional crystallization of hornblende and accessory minerals (e.g., ilmenite and apatite) induces the adakitic geochemical signature of BGPs. Compared with the BGPs, the MPs had a relatively deeper magma source region, whereas the MMGs had a relatively shallower magma source region. The BGPs and the Mo-bearing fluids of the Ulgen deposit were most probably derived simultaneously from magma that was generated at an extensional setting following the closure of the Mongol-Okhotsk Ocean during the latest Jurassic. Enrichment of Mo by late-stage fractional crystallization most likely played an important role in concentrating Mo during the formation of the Ulgen hidden Mo deposit. [ABSTRACT FROM AUTHOR]

The Eocene Yulong porphyry copper belt (YPCB) in eastern Tibet contains more than 10 Mt of Cu metal, associated with subvolcanic to volcanic porphyry systems intruding Cenozoic sedimentary basins. Geochemical data analysis shows that all samples belonged to high-K calc-alkaline and shoshonite series with metaluminous–peraluminous characteristics, light rare earth elements and large ion lithophile elements enrichment, high field strength elements depletion, and share geochemical similarities to adakitic rocks. We have established a spatiotemporal evolution framework through geochronological data analysis, combined with calculated bulk zirconium saturation temperature, calculated crustal thickness and geophysical evidence. We identified three magmatic processes triggered by asthenospheric upwelling and thermal erosion of thickened crust: (1) ultrapotassic magma derived from metasomatized mantle; (2) coeval ultrapotassic melt that promoted the partial melting of eroded lower crust and the generation of high-K adakitic felsic melt; high-K and Mg# adakitic fertile magma was formed by interaction between the eroded sulfide-rich juvenile lower crust-derived melt and mantle peridotite; (3) high-K adakitic fertile magma was derived from sulfide-rich juvenile lower crust, triggered by injecting hydrous ultrapotassic magma into thinned lower crust. The difference between deposit size in the north/south section of Yulong belt may be caused by the temperature of magmatic source and the volume of coeval potassic–ultrapotassic magmatism. Our analysis of the YPCB suggests that magmatism after 175 Ma within Intermontane arc complex of the Canadian Cordillera has high potential for porphyry deposits. [ABSTRACT FROM AUTHOR]

The Haib porphyry copper deposit is situated in the Richtersveld Subprovince and is host to unique Palaeoproterozoic porphyry copper mineralisation in Namibia. Several lines of evidence, including machine-learning geothermobarometry, indicate that the deposit is exposed at mid- to upper-crustal levels, as constrained from average pressure and temperature estimates of 4 kbar and 870°C, respectively. The Haib porphyry copper deposit is associated with, and is in close proximity to, a mafic-ultramafic intrusion named the Kokerboom Intrusion (KI) in this study. Together with several other mafic intrusions in this region, these intrusions are known collectively as the Vuurdood Subsuite of the Richtersveld Subprovince. The purpose of this study is to demonstrate a genetic link between the KI and the Vuurdood Subsuite using lithological characteristics, mineral and alteration assemblages, major and trace element geochemistry and U-Pb geochronology. Pyroxenites from the KI contain magmatic sulphides and have a geochemical affinity with shallow plutonic and volcanic rocks of the Haib porphyry, providing a unique mid-crustal perspective on porphyry copper deposit metallogenesis. [ABSTRACT FROM AUTHOR]

In Ecuador and Colombia there is a belt of crystalline rocks of the Jurassic age, in which discoveries of copper porphyry-type mineral deposits have been made during the last decades. The reason for carrying out the present study is in the northern part of the Putumayo department, a prospective area for the discovery of porphyry-type mineral deposits of Cu-Mo, like Mocoa. For the identification of geochemical anomalies from the regional exploration stage, geostatistical modeling is used through the conditioned turning bands simulation tool, using data from 443 fine current active sediment samples, taken in basins within the study area draining mainly Jurassic age rocks. The automatic cartography of turning bands carried out for each of the elements under study identified four anomalies of regional importance, corresponding to geochemical signatures in the identification of copper porphyry systems on the surface. [ABSTRACT FROM AUTHOR]

The genetic link between subduction- and collision-related porphyry Cu deposits (PCD) is still not well understood. The Gangdese porphyry Cu belt (GPCB) in southern Tibet hosts two parallel E–W-oriented metallogenic subbelts, including a southern Jurassic subduction-related and a northern Miocene post-collision PCD subbelt. In this study, we combine new and published whole-rock major and trace element data, Cu isotopic compositions and zircon trace element data of Jurassic magmatic rocks from the GPCB. Combined Sr/Y and La/Yb crustal thickness proxies confirm the south to north geometry of the Jurassic arc-back-arc system across the GPCB. The southern Jurassic magmatic arc rocks have systematically higher whole-rock V/Yb ratios, δ65Cu values and zircon Eu/Eu* ratios compared to those of the northern back-arc region. This suggests that Jurassic southern arc magmas had higher oxygen fugacity and H2O concentration than the contemporaneous northern back-arc magmas, which was controlled by a steep subduction geometry of the Neo-Tethyan oceanic slab. Hydrous and oxidized magmas resulted in Cu enrichment during magma evolution and generation of Jurassic PCD in the southern magmatic arc by inhibiting early sulfide saturation at deep crustal levels. In contrast, the northern back-arc magmas were less oxidized and less hydrous, which triggered early sulfide saturation, resulting in segregation of Cu-bearing sulfides in lower crustal cumulates that provided a favorable metal source for later Miocene PCD in the northern subbelt. Our study indicates that the Jurassic subduction geometry controlled the formation and distribution of Jurassic subduction-related and Miocene post-collision-related PCD in the GPCB. [ABSTRACT FROM AUTHOR]

The Yidun Terrane hosts huge amounts of Late Triassic granitic plutons. While the southern Yidun Terrane, also referred to as the Zhongdian arc, mainly includes Late Triassic porphyry and related porphyry Cu-Au deposits, rare mineralization was found related to the contemporary granitic batholiths in the northern Yidun terrane (NYT). This paper has explored the chemical compositions of the apatite from these intrusions, which provide insights into the petrogenesis and the mineralization potential. The higher Mg and V concentrations and La/Sm ratios of the Zhongdian apatite than the Cuojiaoma and Daocheng apatite in the NYT suggestes that the Zhongdian porphyries were derived from a mixed source with both mantle and crustal contributions, while the Cuojiaoma and Daocheng granites are dominantly crustal derived. Compared with the Cuojiaoma and Daocheng apatite, the Zhongdian apatite are characterized by higher Sr, Eu/Eu* [EuN/(SmN×GdN)0.5], S and Cl, and low Mn and Y concentrations with adakitic affinity, indicating an environment with high oxygen fugacity and S and Cl contents for their parental magmas, which is favorable for the formation of porphyry Cu-Au deposits. By comparing the chemical characteristics of apatite from the ore-bearing porphyries and ore-barren granites in the Yidun Terrane, this study proposes that the apatite from the ore-bearing rocks commonly has relatively high Sr, S and Fe concentrations and low Mn, Y and Si/S ratio. These geochemical characteristics can be good indicators for predicting the metallogenic potential of the rocks. [ABSTRACT FROM AUTHOR]

The southern margin of the North China Craton (SNCC) contains 8 giant (> 0.5 Mt Mo resources), 4 large (0.1–0.5 Mt Mo resources) and many small (< 0.1 Mt Mo resources) porphyry Mo deposits. Their magmatism ages are concentrated within 150–131 Ma, but it is unclear what determines the size of porphyry Mo systems. Herein, we synthesize new and existing data for the Mo-bearing intrusions in the SNCC to investigate the optimal conditions for giant deposit formation. These intrusions share similar whole-rock geochemistry characteristics and highly differentiated features, with SiO2 and K2O contents ranging from 68.55 to 79.13 wt.% and 2.63 to 11.18 wt.%, respectively. They share similar lower crustal sources with a variable input of mantle materials. Their εNd(t) and εHf(t) values range from -19.1 to -12.7 and -29.5 to -9.3, respectively, and indicate no relationship with metal fertility. The similar ΔFMQ values calculated from zircon geochemistry also suggest that the porphyry Mo deposit size is unrelated to magma redox conditions. High magmatic water contents and high differentiation features (SiO2 > 73 wt.%) exhibit significant positive correlations with the deposit size. Therefore, we propose that magma with a high water content triggered by intensive fractional crystallization is the fundamental requirement to produce large Mo endowment in the SNCC. This conclusion is consistent with the criteria that pulsed release of mineralizing fluids from a large magma chamber through fractional crystallization play an important role in the formation of giant porphyry Mo deposits in other molybdenum belts in the world. [ABSTRACT FROM AUTHOR]

A diversity of Devonian-Carboniferous volcanic arcs and granitoid intrusions are exposed in the Gurvansaykhan arc terrane of southern Mongolia. Several giant porphyry Cu-Au-Mo deposits are associated with intrusions within these arcs. The Bronze Fox deposit located in the central part of the Gurvansaykhan arc terrane is an example of a potentially economic deposit with affinity of adakite-like granitoid porphyry (i.e. 428 Mt grading 0.26% to 0.30% Cu for up to 2,437 Mlb of copper and 0.84 Moz gold). The genesis and magmatic evolution of the causative rocks of the Bronze Fox porphyry Cu-Au hosting rocks are poorly understood, and different models are still under debate. In the current study, we present new field observations and petrographic, geochemical, and geochronological data to describe the magmatic evolution and geodynamic settings. In addition, the mineral chemical data are reported from some selected rock-forming minerals to identify crystallization conditions of the studied rock suites by employing geothermobarometric methods. Zircon chronological data reveal the emplaced age at 331 ± 3.4 Ma for the volcanic lava, followed by mineralized granodiorite and monzodiorite with intruded ages of 326.5 ± 3.4 Ma and 326.5 ± 2.7 Ma, respectively. The studied intrusive and extrusive rocks are high-K-alkaline and metaluminous, characterized by high Mg#. They are enriched in large ion lithophile elements (Sr and Ba) and light rare earth elements (LREEs) and depleted in high field strength elements (Nb, Ta, and Ti) and heavy rare earth elements (HREEs). The highly mineralized granodiorite intrusion yields zircon crystallization temperatures ranging from 631.8 to 779.4°C, and the monzodiorite intrusion, which contains relatively low-grade mineralization, has a wider range (599.0 to 803.4°C). The formation pressures of the former range from 0.5 to 0.2 kbar, which is equivalent to a depth of 1.38 km based on amphibole geochemical calculations. The results of mineral chemistry indicate that the unmineralized diorite unit was formed under medium pressure (~50 MPa) and high temperature (~750°C) at depths of 6.8 to 7.5 km. Similarities in geochemistry and petrographic features suggest that the igneous rocks probably originated from a similar magma source (i.e. from the melting of ancient oceanic crust and sediments) but experienced different degrees of partial melting or mixing with lower juvenile crust melts. The estimated fO2 values obtained by amphibole chemistry in the granodiorite and quartz diorite of the Bronze Fox copper-gold mineralization range from −13.0 to −11.8 and −13.2 to −10.8, respectively, confirming that these igneous rocks probably crystallized under relatively oxidized conditions above the nickel-nickel oxide (NNO) buffer. Such results yield an overall range between NNO +2.6 and NNO +1.4, which are characterized by high oxygen fugacities and high Ce4+/Ce3+ ratios that reflect oxidizing magma, thus indicating quite promising potential for porphyry Cu-Au mineralization in the region. Based on the findings of this work, we suggest a new tectonic model of arc magmatism that is a response to the subduction of the Paleo-Asian Ocean in the early Carboniferous period. [ABSTRACT FROM AUTHOR]

The Hongyuan porphyry Mo–Cu deposit (PMCD) is a rare example of a "reduced" deposit, in contrast to classical oxidized porphyry Cu or Mo–Cu deposits. It is characterized by an ilmenite–series I–type felsic granitoid intrusion, reduced ore‐forming fluids with methane‐rich fluid inclusions, and widely distributed primary pyrrhotite. Mo–Cu mineralization in the Hongyuan PMCD occurs as disseminated in porphyry, granular in miarolitic cavity, and vein‐type in the quartz vein. These three types of mineralization are generally produced in the late magmatic period, magmatic‐hydrothermal transition period, and hydrothermal period, respectively. Molybdenite from miarolitic cavities shows a greater contribution from mantle fluid, as evidenced by mantle He proportions of 37.6%–16.8%. Molybdenite in quartz veins has relatively lower mantle He proportions of 1.63%–10.5%, indicating a predominantly crustal fluid source. The 3He/4He variations of these two groups of molybdenite illustrate an increasing input of crustal fluid during the magmatic to hydrothermal transition. Molybdenite samples from miarolitic cavities and quartz veins yield a Re‐Os model age of 300.5 ± 3.7 Ma, which is consistent with the U–Pb ages of zircons in the wallrock porphyries (300–302 Ma). This further indicates simultaneous diagenesis accompanied by mineralization. The Sr–Nd isotopic compositions (initial 87Sr/86Sr: 0.703404–0.703552; initial 143Nd/144Nd: 0.512585–0.512655; εNd[t]: +6.56 to +7.90) and young T2DM model ages (421–531 Ma) of the Hongyuan porphyries suggest that these rocks were derived from partial melting of the basaltic lower crust. We propose that mantle‐derived fluids rose up and mixed with fluids from the lower crust under an extensional tectonic setting, forming mantle‐like Sr–Nd–He–Ar isotopic compositions. The pre‐mineralization stage of the Hongyuan reduced PMCD is marked by quartz‐molybdenite ± K‐feldspar ± pyrite veins or veinlets and miarolitic cavities in the intensively potassic alteration zone. These veins formed at high temperatures (400–476°C) and high salinities (47.5–56.6 wt.%). The syn‐mineralization stage is the main metallogenic stage represented by numerous quartz‐molybdenite ± pyrrhotite veins associated with moderate to high temperatures (248°C–424°C) and low to high salinities (1.57–50.1 wt.%). The post‐mineralization stage is characterized by low temperatures (104–270°C) and low salinities (0.35–8.81 wt.%). Fluid immiscibility, mixing with meteoric water, ore fluid‐wall rock interactions, and decreasing temperature and salinity have played important roles during molybdenum mineralization. [ABSTRACT FROM AUTHOR]

Jiama is a giant, high‐grade porphyry copper system in the Gangdese metallogenic belt, Tibet. Multistage intermediate–felsic porphyries intruded in this deposit, some of which are strongly associated with copper‐polymetallic mineralization. These ore‐bearing porphyries include monzogranite, granodiorite, and quartz diorite porphyries. A new granite aplite dyke was found in the south of Jiama. Its age, genesis, and relationship with ore‐related magmatism are obscure. Here, its emplacement age and petrogenesis were determined using mineralogy, zircon U‐Pb dating, geochemistry, and Sr‐Nd‐Pb isotope studies. The zircon LA‐ICP‐MS U‐Pb age of the aplite dyke is 16.66 ± 0.21 Ma (n = 14, MSWD = 0.66), earlier than that of the ore‐bearing porphyries (∼15 Ma) in Jiama. Furthermore, the aplite exhibits high amounts of silicon (SiO2 = 73.39%–74.74%), potassium (K2O = 5.12%–6.61%), aluminum (Al2O3 = 14.25%–14.69%), and light/heavy rare earth elements (LREE/HREE = 12.12–16.19) as well as negative europium (δEu = 0.47–0.72) and weak negative cerium anomalies (δCe = 0.84–0.93). The aplite dyke is characteristic of metaluminous–peraluminous I‐type granite, which is rich in large‐ion lithophile elements (Rb, Ba, Th and U) and depleted in high‐field‐strength elements (Nb, P and Ti). The aplite dyke and ore‐bearing porphyries in the Jiama deposit are the results of a partial melting of the juvenile lower crust, according to whole‐rock geochemistry and Sr‐Nd‐Pb isotope data, but the dyke and ore‐bearing porphyries were emplaced from the same magma chamber at different times. Thus, the aplite dyke shows the composition of the early evolution stage of shallow magma in the Jiama deposit and is the product of rapid condensation and crystallization. [ABSTRACT FROM AUTHOR]

Copyright of Geology & Resources is the property of Geology & Resources Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The statistical modeling with ILR-RPCA-back CLR has two problems when dealing with the closure effect of geochemical data. Firstly, after performing isometric logratio (ilr) transformation, robust principal component analysis (RPCA) is employed for processing. The double-plot diagram illustrates that the element sequence transformation occurs in the first and second principal components, while the unique principal component remains unattainable. Secondly, by transforming both the score and load into the centered logratio (CLR) space using the U matrix, it is possible to obtain a score result that corresponds to the original order of elements according to the CLR = ILR·U formula. However, for obtaining a load result that corresponds to the original order of elements, an alternative formula "CLR = UT·ILR" must be used instead. In order to determine the optimal element assemblage for porphyry copper deposits, this study conducted statistical analysis on mineral assemblages from discovered deposits in the Gangdese metallogenic belt and identified Cu, Mo, Au, Ag, W, and Bi as key elements associated with porphyry copper deposits. Subsequently, by analyzing the singularities of the composite elements, the spatial overlay of the combined element is carried out, and concentration-area (C-A) fractal filtering is applied to identify the anomaly and background areas. To facilitate comparison, we conducted an analysis of various mineral and ore deposit types, revealing the following findings: (1) Combination elements exhibit superior recognition capability than single elements in porphyry copper deposits; (2) Skarn-type copper deposits unrelated to porphyry show a high degree of dissimilarity compared to those related to porphyry; (3) this method offers advantages over the single element method in evaluating porphyry gold deposits by reducing anomaly levels and initial investment during the evaluation stage for porphyry copper anomalies; (4) However, this method has limited ability in distinguishing between porphyry copper and molybdenum deposits. [ABSTRACT FROM AUTHOR]

Copyright of World Nuclear Geoscience is the property of World Nuclear Geoscience Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The Shibaogou deposit located in the Luanchuan ore concentration area, is a large scale porphyry skarn Mo(W) deposit discovered in recent years. However, the dating of ore forming pluton is still controversial. Meanwhile, the studying of magmatic oxygen fugacity, the important physical and chemical parameters of porphyry deposit, is also not very satisfactory. In order to constrain the age of the Shibaogou pluton and the metallogenic significance of the magmatic oxygen fugacity, the zircon U Pb dating and trace element composition were detected via LA ICP MS method, and the oxygen fugacity and temperature were also calculated. The results show that the ages of porphyritic biotite monzonitic granite, medium fine grained biotite monzonitic granite, and quartz porphyry in the mine were (147.4 + 0.8) Ma, (147.0 ± 1.0) Ma and (146.9 + 1.1) Ma, respectively. The temperatures were 692 °C, 718 °C and 737 °C. The oxygen fugacity(log (O2) wexe - 16.16, - 14.40, and - 12.77, with the relative oxygen fugacity (AFMQ) of 1.25, 3.35, and 3.56, respectively. These indicated that Shibaogou pluton had the characteristics of high temperature and oxygen fugacity, conducive to the formation of porphyry Mo deposits. With evolution of magma, the temperature and oxygen fugacity increased, thus quartz porphyry intruded in the late stage may be an important criteria in ore prospecting. [ABSTRACT FROM AUTHOR]

Porphyry ore deposits are the source of much of the copper, molybdenum, gold and silver. Porphyry hydrothermal systems typically form in magmatic arcs above subduction zones. In this article, some key factors that may be involved in the formation of the Pishtene porphyry deposit in Western Srednogorie are outlined. The first process is the generation of magma in sub-arc mantle and enrichment of metals, water and other fluids. Next stage is a cyclic crystal fractionation in deep crustal magma chamber. There are a lot of other factors, such as a sulphide saturation, metal partitioning, precipitation of ore minerals, magmatic-hydrothermal evolution, erosional and weathering processes, but they are not discussed in this study. [ABSTRACT FROM AUTHOR]

We constrain the magma sources of representative post‐collisional ore‐associated and barren suites in the Sanjiang metallogenic belt, Southwest China. The ore‐associated suites generally have higher Mg# and Cr and Ni contents than the crustal melts. Also, they show wide ranges of whole‐rock Nd and zircon Hf isotopes that are similar to the subduction‐modified mantle‐derived alkaline volcanic rocks in the region. Combing with the geochemical model, we suggest that the ore‐associated suites dominantly originated from partial melts of subduction‐metasomatised mantle by fractional crystallisation. In contrast, the barren suites are mainly characterised by low Mg# and Cr and Ni contents that are comparable to the crustal melts and they have enriched whole‐rock Nd and zircon Hf isotopes, indicating a metasomatised lower crustal origin. The different magma sources play an important role in controlling the fertility of contemporary ore‐associated and barren magmatic suites during post‐collisional porphyry ore formation. [ABSTRACT FROM AUTHOR]

Volatile element abundance is a crucial factor triggering mineralization and controlling the enrichment of molybdenum in porphyry deposits. The Chalukou deposit is the largest porphyry Mo deposit in NE China, with an average grade of 0.087% Mo. In this contribution, we present petrology, bulk geochemistry, zircon U–Pb geochronology and Lu–Hf isotopes, and apatite geochemistry for the Chalukou deposit. The intrusive rocks include pre‐mineralization monzogranite, syn‐mineralization quartz porphyry, fine‐grained porphyry and granite porphyry, and post‐mineralization monzogranite and feldspar porphyry. These granitoids are metaluminous to peraluminous, and belong to alkali‐calcic to calc‐alkalic series. Zircon εHf(t) values of granitoids range from +0.2 to +5.7 with corresponding Hf crustal model ages of 805–1170 Ma, indicating a Mesoproterozoic juvenile crustal source modified by mantle‐derived magma. They are characterized by logf(O2) of −16.1 to −9.4, with an average of −12.5, ΔFMQ of +0.8 to +7.9, with an average of +4.5, showing a relatively high oxidation state for the syn‐mineralization magma. The apatites in quartz porphyry have the highest F contents, ranging from 3.61 to 4.62 wt%. At Chalukou, F‐rich magma is conducive to the convection of magma and promotes the efficient separation of differentiation magma, making the magmatic‐hydrothermal fluid circulate many times, eventually resulting in the accumulation of ore‐forming materials on the top of the magma chamber and gradually aggravating mineral enrichment processes. [ABSTRACT FROM AUTHOR]

The Beiya giant porphyry Au deposit is the largest Cenozoic Au deposit in the Jinshajiang Cu–Mo–Au metallogenic belt. Many granite porphyries of ~36 Ma were exposed in the Beiya deposit, including the Wandongshan (WDS) and Hongnitang monzogranite porphyries (HNT–MPs) with economically important Au metal resources, the uneconomic WDS biotite MP, and Putaishan granite porphyry (GP), and subeconomic MPs at Nandaping (NDP) and Matouwan (MTW) prospects. To reveal the fundamental factors that lead to the different fertility of these granitic porphyries, this study uses the biotite and zircon geochemical compositions to evaluate their petrogenetic and magmatic conditions (e.g., F content, pressure, fO2). The results show that biotites from economic WDS and HNT–MPs exhibit moderate F contents (0.85%–2.16%), low n(FeT)/n(FeT + Mg) ratios (average of 0.36), and shallow emplacement depths of 0.19–1.76 km. In contrast, the uneconomic granite porphyries are characterized by variable F contents (0.17%–2.75%), high n(FeT)/n(FeT + Mg) ratios (average of 0.43), and deep emplacement depths of 2.76 to 5.02 km. Moreover, the economic WDS and HNT–MPs display higher average zircon fO2 (ΔFMQ [fayalite–magnetite–quartz] of +0.88) than uneconomic granite porphyries (ΔFMQ of −0.19), further confirming a higher fO2 of the economic granitic porphyries. These features indicate that magmatic fO2 is a critical factor controlling Cu–Au mineralization at the Beiya Au deposit. In comparison with the economic WDS and HNT–MPs, the subeconomic MPs in the MTW and NDP prospects exhibit higher average biotite n(FeT)/n(FeT + Mg) ratios of 0.47 and 0.45, and lower average zircon ΔFMQ of −0.05 and −0.23, suggesting lower magmatic fO2 and thus have relatively weak potentials to form Cu–Au mineralization. Notably, the economic WDS and HNT–MPs have higher biotite XMg ratios than those of the subeconomic and uneconomic granitic porphyries, indicating that the economic MPs were formed by the partial melting of mixed lower crustal materials with more mantle‐derived materials. Therefore, the addition of mantle‐derived materials played an important role in determining the fO2 of the granitic porphyry, thus primarily controlling its fertility of Cu–Au mineralization. [ABSTRACT FROM AUTHOR]

Whole-rock geochemical signals of porphyry intrusions can provide clues for key metallogenetic processes and the potential for porphyry Cu deposits (PCDs). However, it cannot be guaranteed that these signals are the best choices, because they are proposed more based on the individual experience of researchers or some local and limited research data. In this study, it was found that the fertility potential for contemporaneous porphyry intrusions from different locations (fertility field) could be identified according to the composition statistics of the porphyry intrusions in the southern Sanjiang Tethyan Orogen. Therefore, a crucial signal-ranking Monte Carlo-based framework was implemented using the feature importance acquired from a random forest machine learning method. The first six crucial variables among 31 oxides and elements for fertile magma identification were then grouped into three sets using principal component analysis and hierarchical cluster analysis. Several optimal two-dimensional discrimination plots were built based on the k-nearest neighbor classification method according to the three sets of oxides and elements. The results indicate that the fertile magmas have signatures of high Sr, Ba, and P2O5 and low heavy rare earth elements (REEs) and SiO2. These signatures indicate that hydrous, oxidized, and volatile-rich Cu-fertile magmas originated from a thick arc crustal environment and underwent amphibole and garnet fractionation in the deep crust and the subsequent addition of mafic melt in shallow chambers. The application of these discrimination plots in the Paleo-Tethyan shows that the Zhongdian Triassic–Jurassic PCDs that developed in the sub-Paleo-Tethyan subduction zones are special cases. [ABSTRACT FROM AUTHOR]

Significant progress in the classification, definition and understanding of the main Au deposit types could significantly aid improvements in Au exploration. Because of the wide occurrence of Au in the central part of the Tethyan Eurasian Metallogenic Belt, Iranian structures composed of more than 17 zones (arcs and blocks) are considered as having one of the largest Au reserves in the Middle East. Without attempts at understanding the tectono-magmatic evolution of Iran and the geodynamic settings of Au deposition, the establishment of a reliable predictive exploration model for Au-type deposits in Iran and other parts of the world will be unsuccessful. By considering a total of 33 Au deposits and prospects in Iran, a mineralization sequence is revealed from orogenic and volcanogenic massive sulfide (VMS), orogenic, Carlin-type, epithermal/porphyry Cu–Au/skarn, epithermal/iron oxide–copper–gold (IOCG). The trend of deposition gradually changes in the SW–NE axis to intrusion-related, epithermal and porphyry Cu–Au deposits at the Urumieh–Dokhtar Magmatic Arc (UDMA) and post-arc magmatism. VMS deposits occur adjacent to the NE Zagros Fold and Thrust Belt, at the Sanandaj–Sirjan Zone. The Zagros Orogeny and associated post-collisional magmatism at UDMA host many porphyry, epithermal and intrusion-related Au deposits, with a major magmatism peak in the Miocene. This work reveals that orogenic and Carlin-type Au mineralization are linked genetically. After each associated subduction for Palaeotethys (286–215 Ma) and Neotethys (210–68 Ma) in Iran, VMS and orogenic Au-deposits are formed in the border of the subduction (±obduction) zone. The porphyry, intrusion-related, epithermal and IOCG mineralization are emplaced in appropriate formations and structures during collision and post-collision processes. [ABSTRACT FROM AUTHOR]

Copyright of Geology & Exploration is the property of Geology & Exploration Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The Yangchuling porphyry W–Mo deposit is an oxidized tungsten deposit in the Jiangnan tungsten belt, which is the largest tungsten belt in the world. Both W- and Mo-mineralization predominantly occur in the cupola of a monzogranite porphyry with abundant mafic dikes and microgranular mafic enclaves (MMEs). Acicular apatite in MMEs and similar SIMS U–Pb zircon ages of the monzogranite porphyry (149.7 ± 1.1 Ma) and MMEs (148.7 ± 1.3 Ma) suggesting mixing of mafic and felsic melts. Plagioclase phenocrysts are oscillatory zoned with An-rich and An-poor zones with lower 87Sr/86Srinitial values and higher contents of Mg, Ti, and Sr in the An-rich zones and resorption surfaces in An-poor bands. These textures reflect multiple injection of mafic magma into the magma system responsible for the formation of the Yangchuling deposit. Whole rock Sr–Nd isotope data and zircon Hf–O isotope data indicate 60–70% contribution from the enriched mantle and 30–40% from the crust to the ore-forming granitic rocks. The W and Mo endowments of the Yangchuling deposit and other W-Mo deposits in the Jiangnan tungsten belt have different sources. Whereas W is derived from the melting of supracrustal metasedimentary rocks, Mo is contributed by mafic magmas. The latter is inferred from (i) the close relationship of Mo mineralization with mafic dikes and MMEs rather than the more evolved monzogranite porphyry and (ii) higher Mo concentrations in scheelite from MMEs (3020–3406 ppm) than in scheelite from the host monzogranitic porphyry (540–1886 ppm). On the scale of the whole Jiangnan tungsten belt, granitic rocks with more intense Mo mineralization have higher εHf zircon values that demonstrate higher input of mantle material to the deposit-forming granites. [ABSTRACT FROM AUTHOR]

The Bangbule skarn lead‐zinc (Pb‐Zn) deposit (>1 Mt Zn + Pb) is located in the western Nyainqentanglha polymetallic metallogenetic belt, central Tibet. Lenticular orebodies are all hosted in skarn and developed in the contact zone between the quartz porphyry and carbonate strata of the mid Paleozoic Middle to Upper Chaguoluoma Formation as well as in carbonate and sandstone beds of the Upper Paleozoic Laga Formation. As a newly discovered skarn deposit, the geological background and metallogenesis of this deposit remain poorly understood. Detailed petrological, geochemical and geochronological data of the ore‐related quartz porphyry, helps constrain the mineralization age and contributes to discussion on the ore genesis of the Bangbule deposit. Both endoskarn and exoskarn are identified in the Bangbule deposit. From quartz porphyry to carbonate formation, the exoskarn is zoned from proximal garnet skarn to distal pyroxene skarn. Zircon U‐Pb dating results show that the quartz porphyry formed at 73.9 ± 0.8 Ma. Geochemical analysis results show that the quartz porphyry has high contents of SiO2 (71.40–74.94 wt%) and K2O + Na2O (3.76–8.46 wt%) with A/CNK values of 0.69 to 1.06. Besides, the quartz porphyry is enriched in large ion lithophile elements (LILEs) and light rare earth elements (LREEs) and have low εNd(t) (from –8.25 to –8.19) and high initial (87Sr/86Sr)i values (0.713611–0.714478). Major, trace elements and whole‐rock F concentration analysis results from the endoskarn samples show higher TFe2O3, MgO, CaO, Pb + Zn, W, Sn, Mo and F etc., and lower alkalis (K2O, Na2O, Sr and Ba) than those of fresh quartz porphyry, indicating that the early ore‐forming fluids were an Ca‐Fe‐F‐enriched fluid. Massive ore in the proximal skarn might be related to the high F content in the magma, which lowered the solidus temperature of the quartz porphyry magma and caused a lower temperature of the ore‐forming fluids, as well as facilitating the precipitation of sphalerite and galena. Based on the geochemical characteristics presented in this study, we propose that the ore‐related quartz porphyry was formed by partial melting of crust materials with some juvenile crustal component input. The partial melting of the middle‐upper crust after the initial enrichment of lead and zinc elements are important for the formation of Pb‐Zn deposits. The case study of the Bangbule deposit has proven that there is still a crust‐derived magmatic source region in the western segment of the central Lhasa terrane. Therefore, there is still great potential for Pb‐Zn mineralization and Pb‐Zn exploration. [ABSTRACT FROM AUTHOR]

Copyright of Geology & Exploration is the property of Geology & Exploration Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Geology & Exploration is the property of Geology & Exploration Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Anorogenic magmatism in the northern Arabian-Nubian Shield occurred during a long-lasting crustal extension event (<580 Ma), which succeeded the formation of the Pan-African orogenic belt in NE Africa and Arabia. Late Neoproterozoic anorogenic felsic volcanic-subvolcanic rocks, along with post-collisional granitoid suites, are exposed in the Gabal Abu Durba mountain range along the eastern flank of the Gulf of Suez in Sinai. These rocks include granite and rhyolite porphyries, metaluminous to weakly peralkaline with distinct potassic alkaline and ferroan affinities. Major and trace element characteristics such as K2O/MgO >16, total alkalis >8.5 wt.%, (K2O + Na2O)/CaO >10, agpaitic index (NK/A) >0.85 and Zr (>250 ppm), Nb (>20 ppm), Y (>80 ppm), Zn (>100 ppm) and Ce (>100 ppm), and 10,000 × Ga/Al >2.6 and [Zr + Nb + Y + Ce] >350 ppm are suggestive of an A-type granite genesis. Zircon U-Pb dating of two representative samples returned crystallization ages of 569 ± 2.6 Ma and 561.7 ± 3.2 Ma for granite and rhyolite porphyries, respectively. The melting temperatures estimated at 997–1020°C are consistent with high-temperature liquidus conditions. Fractional crystallization, coupled with less significant crustal assimilation, was likely the main mechanism of formation of these rocks from a common primitive asthenospheric mantle-derived trachytic magma in an anorogenic intra-plate setting. The A-type alkali granite and rhyolite porphyries of Gabal Abu Durba are manifestations of mantle upwelling and lower crust underplating in the late Ediacaran anorogenic stage. These felsic subvolcanic intrusions (≈ 569–562 Ma) along with their volcanic counterparts constitute a new unmatched rock unit that most probably represent the last chapter of the anorogenic magmatism in the Neoproterozoic Arabian-Nubian Shield crust before the beginning of Phanerozoic era. [ABSTRACT FROM AUTHOR]

Different ore deposit types may evolve from a common magmatic-hydrothermal system. Establishing a genetic link between different deposit types in an ore cluster can not only deepen the understanding of the magmatic-hydrothermal mineralization process but can also guide exploration. Both the Nihe iron-oxide–apatite (IOA) deposit and the Shaxi porphyry Cu–Au deposit in the Lower Yangtze Valley, Anhui, Southeast China, formed in the Luzong Cretaceous volcanic basin at ~130 Ma. We examined a temporal–spatial and potential genetic link between these deposits based on stratigraphic lithofacies sections, biotite and clinopyroxene mineralogical chemistry, zircon chronology, Hf isotopes, and trace elements. Stratigraphy, petrology, mineralogical chemistry, and available fluid inclusion results support that the emplacement depth of the Nihe ore-related porphyry is shallower than that of the Shaxi porphyry. The magmatic zircon and hydrothermal zircon from Nihe provided U–Pb ages of 130.6 ± 0.7 Ma and 130.7 ± 0.7 Ma, respectively. The magmatic zircon U–Pb age (130.0 ± 0.8 Ma) of Shaxi overlaps with its molybdenite Re–Os age (130.0 ± 1.0 Ma). The agreement between the mineralization and porphyry emplacement ages of Nihe and Shaxi indicates a temporal coincidence and supports a possible genetic link between the two deposits, considering their close spatial relationship (in the same ore district, 15 km). The zircon Hf isotopes and trace elements support the evolution of both deposits from an enriched lithospheric mantle, although the Shaxi deposit may have experienced contamination of the Jiangnan-type basement. Both deposits lie above the fayalite-magnetite-quartz buffer, but the Nihe magmatic zircons are of lower temperature and less oxidized than that of Shaxi. The much higher Eu/Eu* and Yb/Dy values of zircons from Shaxi are likely caused by the suppression of early plagioclase crystallization and the prevalence of amphibole fractionation, thus indicating more hydrous content of the Shaxi ore-related magma. Additionally, the Shaxi ore-related porphyry has higher zircon Hf concentrations, suggesting that the porphyry Cu–Au deposit has experienced a greater degree of magma fractionation. Our study highlights that the Nihe IOA deposit and the Shaxi porphyry Cu–Au deposit have a common magma source, while different extent of crust contamination, magma oxidation state, hydrous content, and degree of magma fractionation collectively result in the two distinct ore deposits. This possible genetic link suggests a great potential of porphyry Cu–Au-PGE mineralization in the Middle–Lower Yangtze River metallogenetic belt, especially in the deep part of the IOA district in the Luzong Cretaceous volcanic basin. [ABSTRACT FROM AUTHOR]

The North Tianshan Ocean represents a critical southwestern segment of the Paleo-Asian Ocean and is crucial for understanding accretionary and collisional processes of the southwestern Central Asian Orogenic Belt. The Dananhu arc belt, an important porphyry Cu deposit metallogenic belt in the eastern North Tianshan, records Paleozoic episodic magmatism. However, the tectonic affinity and evolution processes of the Dananhu arc belt are still open to debate. Here, geochronology, major and trace elements, and Sr-Nd-Hf isotope compositions for magmatic rocks are conducted to reveal the ages, petrogenesis, and tectonic settings of these magmatic rocks in the Dannanhu arc belt. The Carboniferous dacite (328 Ma) and gneissic granite (310 Ma) show high-K calc-alkaline, enriched in large ion lithophile elements (LILEs; e.g. Rb, Th, and U), depleted in high field strength elements (HFSEs; e.g. Nb, Ta, and Ti), depleted isotopic compositions (εNd(t) = 1.3-3.4; εHt(t) = 0.5-12.5) and juvenile Nd-Hf model ages. Combining these Carboniferous magmatic rocks with the features of high Sr-Ba granitoid and Sr-Nd isotopic decoupling, we suggest that these Carboniferous rocks were probably formed through fractional crystallization of partial melting of mantle wedge that had been metasomatized by melts from subducted sediments in a forearc setting. The early Permian granites (289-276 Ma) show high K2O+Na2O (6.9-8.9 wt.%), low MgO (0.06-0.15 wt.%) contents, high positive zircon εHt(t) (10.5 to 12.1) and whole-rock εNd(t) (4.4-5.5) values, suggesting that the early Permian granites were derived from juvenile lower crust in a post-collisional setting. Our geochronological and geochemical data, together with published data, reveal that high flux arc magmatism with age peaks at ca. 431 and 332 Ma is consistent with porphyry copper mineralization in the Dananhu arc belt, implying a close genetic relationship. The final closure of the North Tianshan Ocean was constrained to the late Carboniferous and early Permian. [ABSTRACT FROM AUTHOR]

Copyright of Geology & Exploration is the property of Geology & Exploration Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Most porphyry Cu deposits are formed in magmatic arc settings, but some occur in non-arc environments, such as intracontinental settings. The petrogenesis of fertile magmas for porphyry Cu deposits formed in intracontinental settings is still ambiguous. To address this issue, we performed an integrated study of the late Mesozoic porphyry Cu deposits in the South Qinling Orogenic Belt. Zircon U–Pb ages indicate that these late Mesozoic porphyry Cu deposits were formed at 149–142 Ma, in a postcollisional intracontinental setting. εNd(t) (− 4.5 to − 2.7), initial 87Sr/86Sr (0.7046 to 0.7084), and zircon εHf(t) values (− 3.8 to + 2.2) of the late Mesozoic ore-forming and barren rocks suggest that both originate from Meso-Neoproterozoic juvenile lower crust. Whole-rock geochemical and isotopic characteristics indicate that the ore-forming rocks could be formed by the delamination of thickened juvenile lower crust or by the reaction of mantle with normal juvenile lower crust. The barren rocks could be formed by the partial melting of thickened or normal juvenile lower crust. Whole-rock petrochemistry and reversed anorthite contents and Sr isotope data of zoned plagioclase crystals indicate that the mafic magma was recharged into the ore-forming magma chamber. Due to the injection of mafic magma, the ore-forming rocks obtained higher oxygen fugacity, volatiles, water, sulfur, and Cu contents than the barren rocks. According to the regional tectonic evolution, the late Mesozoic porphyry Cu deposits in the South Qinling Orogenic Belt were formed in an extensional environment due to transformation of the tectonic regime. Large-scale lithospheric extension caused asthenospheric mantle upwelling and crust-mantle interaction, providing the crucial metallogenic conditions. Moreover, the injection of mantle-derived mafic magma into the normal magma is a key factor in the formation of the late Mesozoic porphyry Cu deposits in the SQB and similar porphyry systems in an intracontinental setting. [ABSTRACT FROM AUTHOR]

Compositional features of a total of 1887 gold alluvial particles from six localities to the south of Loch Tay in central Scotland were interpreted to establish different types of source mineralization. Populations of gold particles from each locality were grouped according to alloy and inclusion signatures. Inclusion suites provided the primary discriminant with gold from Group 1 localities showing a narrow range of simple sulphide and sulphoarsenide inclusion species, whereas a wide range of minerals including molybdenite, bornite and various Bi and Te- bearing species were identified in gold from Group 2 localities. Whilst the range of Ag in alloys in all populations was similar, higher incidences of measurable Hg and Cu were detected in Group 1 and Group 2 gold samples respectively. The application of compositional templates of gold from other localities worldwide indicated that Group 1 gold is orogenic and Group 2 gold is a mixture of porphyry and epithermal origin; a result that is sympathetic to the spatial relationships of sample localities with local lithologies. This approach both provides an enhanced level of understanding of regional gold metallogeny where in situ sources remain undiscovered, and permits clearer targeting of deposit types during future exploration. [ABSTRACT FROM AUTHOR]

The Tudigou porphyry Cu deposit is located in the central part of the southern Qinling belt. Copper mineralization is closely associated with monzogranite porphyry. Zircon LA–ICP–MS U–Pb dating of monzogranite porphyry suggests that the ages of magmatism at Tudigou vary between 150 ± 1 and 148 ± 1 Ma and overlap with the molybdenite Re–Os age of 150–148 Ma, indicating that the Tudigou intrusion and associated mineralization formed during the Late Jurassic. The enrichment in large‐ion lithophile elements, depletion in high‐field‐strength elements, high Ba/Th and La/Yb ratios, and negative correlation between Dy/Yb and La/Sm ratios, together with narrow ranges of εHf(t) values (εHf(t) = −4.0 to +1.4) suggest monzogranite porphyry was derived from a metasomatized lithospheric mantle with minor crustal components contribution, which is also evidenced by the lead isotopic result. The La/Yb ratios of 30 Mesozoic plutons in the southern Qinling belt were used to calculate the Moho depth, which suggests that the magmatism and mineralization in the region occurred during lithosphere thinning in response to the tectonic transition from compression to extension transitional regime. The calculated oxygen fugacity of the Late Mesozoic porphyry deposits in the Qinling–Dabie orogen have identical ΔFMQ values (averaging +1.4 to +2.4). However, the V/Sc ratios (the proxy for water content) are distinct among different deposit sizes, indicating that the dissolved water in the magma plays a critical role in porphyry‐type mineralization. [ABSTRACT FROM AUTHOR]

Magmatic sources of porphyry deposits in postcollisional settings remain controversial. We have used new and published petrological and geochemical data for the Eocene–Oligocene porphyry Cu ± Mo ± Au deposits in the Sanjiang region, SW China, to address this outstanding issue. New data for three deposits (Machangqing, Tongchang, and Beiya) in the Ailaoshan–Red River porphyry Au-Cu-Mo belt (southern part of the Sanjiang region) suggest that ore-forming porphyries were emplaced at ~ 35 Ma, have high (87Sr/86Sr)i (0.7068–0.7071) and negative εNd(t) (− 6.9 to − 5.0), low zircon εHf(t) (− 5.3 to 4.5), and relatively high δ18O (5.9–9.0‰). Magmatic amphibole phenocryst compositions indicate that the parental magmas are all relatively oxidized (ΔFMQ = 1.7 ± 0.6), and H2O-rich (3.8 ± 0.3 wt% H2O). These results are consistent with those estimated from zircon compositions (ΔFMQ = 1.8 ± 0.8) and high whole-rock Sr/Y ratios (75 ± 31), respectively. Based on the new and published data, we suggest that the parental magmas for the Ailaoshan–Red River porphyry Au-Cu-Mo belt were derived from a preserved juvenile arc lower-crust and the underlying metasomatized subcontinental lithospheric mantle (SCLM) attributed to a Neoproterozoic subduction event, whereas the parental magmas for the Yulong porphyry Cu-Mo belt (northern part of the Sanjiang region) originated from the Permian–Triassic juvenile arc lower-crust and metasomatized SCLM. Additionally, parental magmas for these porphyry deposits are all oxidized and H2O-rich, and we attribute such characteristics to inheritance from mixed mantle-crust sources that were modified by previous oceanic slab subduction. [ABSTRACT FROM AUTHOR]

We proposed a stepwise procedure to obtain a multiscale 3-D resistivity model beneath the Caosiyao porphyry Mo deposit. Due to the joint inversion of data collected from 302 audio-frequency magnetotelluric and 33 broad-band magnetotelluric sites, this model can simultaneously combine both the shallow resolution and detection depth. The near-surface part of the model reveals the high-resolution structures. Specifically, a high-resistivity body (>500 Ω m) is interpreted as the late Jurassic porphyry intruding into the metamorphic basement. Two NE-trending high-conductivity (<100 Ω m) belts are interpreted as fault zones. The one in the southeast extends deeply (>15 km) is suggested to be a crust-scale weak zone and conduit for transporting ore-forming magmas and fluids. The other one is shallow (<2 km), but coincides with outcropped orebodies and alteration zones, so it may have played an important role in the hydrothermal alteration and mineralization. A predominant high-conductivity block (<30 Ω m) occurs within the lower part (∼15–30 km) of the model and connects with Caosiyao deposit through the inferred crust-scale fault. Its enhanced conductivity may result from the abundant fluids. We determined it had been a mid-lower crustal magma chamber providing space for the mixing of ore-forming magmas and fluids, as well as the element exchange during the mineralization. Combined with a previous magnetotelluric imaging, we suggested the heats and fluids needed for the mineralization might have been transported from a giant upper-mantle basaltic magma reservoir as indicated by a conductor beneath the Datong volcanic area through a lithosphere-scale shear zone. Summarily, the multiscale resistivity model provides us a chance to depict the multiscale metallogenic system for the Caosiyao porphyry Mo deposit from the aspect of electrical resistivity. [ABSTRACT FROM AUTHOR]

The Naruo porphyry copper deposit containing more than 2 Mt of copper is located in the Duolong ore district in the west of the Bangongco–Nujiang belt in central Tibet. New zircon U‐Pb, biotite 40Ar/39Ar, zircon (U‐Th)/He ages, published age data together with thermal modeling were presented in this paper to investigate the thermal history of Naruo deposit. Thermal modeling reveals a prolonged magmatic‐hydrothermal evolution firstly cooling from ∼700°C to ∼350°C at 120 Ma, then cooling to 230°C at 106 Ma and maintaining at 200°C from 106 to 90 Ma which is attributed to multiple magmatic events and thermal effect of strike‐slip fault. Affected by thrust nappe structure, the sample was consistent with 120°C from 70 to 63 Ma. The Naruo deposit started to experience exhumation at a rate of ∼0.07 km/Myr since 60 Ma which is related to India‐Asia collision. The prolonged magmatic‐hydrothermal evolution process might have important influence on the Naruo deposit. The ore‐related intrusions preserved in the foot walls of strike‐slip fault and thrust nappe structure are the objects of future exploration in the Duolong ore district. [ABSTRACT FROM AUTHOR]

Copyright of Geology & Resources is the property of Geology & Resources Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Sulfide-rich hydrous arc cumulates in the lower crust are considered a likely source for porphyry Cu-forming magmas in post-subduction settings. However, it remains controversial whether or not post-subduction porphyry Cu magmas can be produced by partial melting of lower crustal arc cumulates. Here we performed detailed petrographic and geochemical studies on exhumed lower to middle crustal cumulates from the Gangdese and Kohistan arc sections, and then conducted partial melting experiments of the Gangdese sulfide-rich lithologies at 1.5 GPa and 800°C–1150°C using a piston cylinder press. Both the Gangdese and the Kohistan arc-root samples formed as cumulates in the lower to middle crust, but the Kohistan samples were subsequently brought into the garnet stability field during the India–Eurasia continental collision. Most of the Gangdese samples contain relatively high abundances of magmatic sulfides preserved in the form of Cu-poor monosulfide solid solution. In contrast, most of the Kohistan samples contain very low abundances of Cu-rich sulfides preserved as inclusions in garnet, probably due to intense metamorphic dehydration and up to 2 wt% partial melting in the garnet stability field. The original magmatic sulfides at Kohistan appear to have been removed mainly by metamorphic fluids rather than by partial melts, as the arc-root samples could have experienced only very low degree of partial melting and the sulfur solubility in experimentally produced partial melts is low (≤0.1 wt%) even at oxygen fugacities two log-units above the fayalite-magnetite-quartz buffer. Furthermore, the experimental partial melts contain much less K2O, MgO, Cl and ±S than typical post-subduction porphyry Cu-forming magmas. Hence, we conclude that the role of sulfide-rich arc cumulates in the formation of post-subduction porphyry Cu magmas has been severely overestimated. [ABSTRACT FROM AUTHOR]

Porphyry-type deposits are a vital source of green technology metals such as copper and molybdenum. They typically form in subduction-related settings from large, long-lived magmatic systems. The most widely accepted model for their formation requires that mantle-derived magmas undergo an increase in volatiles and ore-forming constituents in mid- to lower crustal reservoirs over millions of years, however, this is mostly based on observations from shallow, sporadically exposed parts of porphyry systems. To examine this paradigm, we have evaluated the timeframe and geochemical signatures of magmatism in a ~ 8 km palaeodepth cross-section through plutonic and volcanic rocks of the classic Yerington magmatic system, Nevada. We show that the magmas in the upper parts of the system (< 8 km) underwent a major and rapid change in chemistry over a period of < 200 kyrs that is coincident with the initiation of ore formation. We attribute this change to a shift from extraction of quartz monzodiorite and quartz monzonite magmas evolving in mid-crustal reservoirs, and that had relatively poor ore-forming potential, to extraction of volatile-rich granitic magmas from greater (~ 30 km) depths. As the granites crystallised, late stage melts were intruded through the carapace as aplite dykes which contain traceable expressions of the porphyry deposit-forming fluids. The rapid nature of the shift in ore-forming potential narrows the temporal-geochemical footprint of magmas associated with porphyry mineralisation and provides new constraints for exploration models. [ABSTRACT FROM AUTHOR]

Demingding is a promising porphyry Mo-dominated deposit recently discovered in the eastern Gangdese metallogenic belt in Tibet, China. We present zircon U-Pb-Lu-Hf isotopic studies, as well as geochemical data of the late monzogranites and the prior rhyolites from the Demingding porphyry deposit to uncover their origin and geodynamic mechanism. Zircon U–Pb dating yielded precise crystallization ages of 17.3 ± 0.6 Ma (MSWD = 2.5) and 186.5 ± 3.0 Ma (MSWD = 2.0) for monzogranite and rhyolite, respectively. The monzogranite is characterized by high-K calc-alkaline, adakitic affinities, and positive zircon εHf(t) values (+0.9∼+5.6, avg.+3.1) with TDM2 (0.73–1.04 Ga), while the rhyolite has εHf(t) values of (+2.1∼+7.3, avg.+5.2) and TDM2 of (0.76–1.09 Ga) similar to the monzogranite. Our results suggest that the Demingding porphyry Mo (Cu) deposit is related to magma generated from the Neo-Tethyan oceanic subduction. The subsequent monzogranite porphyry was likely formed by the remelting of previously subduction-modified arc lithosphere, triggered by continental collision crustal thickening in Miocene. The lower positive εHf(t) values of monzogranites suggest minor inputs from the Mo-rich ancient crust, suggesting that Mo favors the silicate melt. Such magmatic events and special metallogenesis typify intracontinental processes and porphyry copper deposits, which are normally confined to oceanic subduction and Cu-dominated style, thereby making the continental setting and Mo-dominated style of Demingding exceptional and possibly unique. [ABSTRACT FROM AUTHOR]

A current mineral exploration focus is the development of tools to identify magmatic districts predisposed to host porphyry copper deposits. In this paper, we train and test four, common, supervised machine learning algorithms: logistic regression, support vector machines, artificial neural networks (ANN) and Random Forest to classify metallogenic 'fertility' in arc magmas based on whole-rock geochemistry. We outline pre-processing steps that can be used to mitigate against the undesirable characteristics of geochemical data (high multicollinearity, sparsity, missing values, class imbalance and compositional data effects) and therefore produce more meaningful results. We evaluate the classification accuracy of each supervised machine learning technique using a tenfold cross-validation technique and by testing the models on deposits unseen during the training process. This yields 81–83% accuracy for all classifiers, and receiver operating characteristic (ROC) curves have mean area under curve (AUC) scores of 87–89% indicating the probability of ranking a 'fertile' rock higher than an 'unfertile' rock. By contrast, bivariate classification schemes show much lower performance, demonstrating the value of classifying geochemical data in high dimension space. Principal component analysis suggests that porphyry-fertile magmas fractionate deep in the arc crust, and that calc-alkaline magmas associated with Cu-rich porphyries evolve deeper in the crust than more alkaline magmas linked with Au-rich porphyries. Feature analysis of the machine learning classifiers suggests that the most important parameters associated with fertile magmas are low Mn, high Al, high Sr, high K and listric REE patterns. These signatures further highlight the association of porphyry Cu deposits with hydrous arc magmas that undergo amphibole fractionation in the deep arc crust. [ABSTRACT FROM AUTHOR]

A 3-D lithospheric resistivity model is obtained with 699 MT stations. The upper-mantle low-resistivity anomalies beneath the eastern SCB show a spatial distribution that is gradually shallowing from south to north, probably indicating that the asthenospheric materials are upwelling from south to north, corresponding with the changing progressively of magma and metallogenic activities. [Display omitted] • The 3-D lithospheric resistivity structure of the lithosphere in South China is obtained by inverting 699 MT stations. • The resistivity structure and disposition of four metallogenic belts in the South China Block are outlined. • The upper-mantle low-resistivity anomalies show a spatial distribution of gradual shallowing, indicating the asthenospheric upwelling from south to north. The South China Block (SCB) is located at the junction of the Pacific, Eurasian, and Indo-Australian plates. Their interaction led to large-scale multi-stage mineralization in the SCB during the Mesozoic. Several regional ore-concentration areas, such as the Middle-Lower Yangtze Metallogenic Belt (MLYMB), the Qinzhou-Hangzhou Metallogenic Belt (QHMB), the Wuyishan Metallogenic Belt (WYMB), and the Nanling Metallogenic Belt (NLMB) were formed during this process. However, the dominant mineral types of these metallogenic belts are different. To study the deep mechanisms of the different metallogenic types developed in the same tectonic background at almost the same period, the magnetotelluric sounding (MT) data from 691 sites located mainly within the eastern SCB are employed to obtain a regional lithospheric 3-D resistivity model. It could be concluded from the resistivity model that deep low-resistivity anomalies and mantle upwelling channels mainly controlled almost all the Mesozoic deposits. Large-scale low-resistivity bodies extend from the crust to the upper mantle beneath the MLYMB and the QHMB, interpreted as channels of mantle-derived magma and melts/fluids containing metallogenic elements upwelling. However, the MLYMB and the QHMB have different upper crustal ore-conducting and ore-controlling structures, thus forming porphyry copper and copper-bearing tungsten deposits. Small-scale low-resistivity anomalies are invading the high-resistivity crust in the NLMB. And remelting the upper crust, mixing, and intrusion of crust-source magma, enriching tungsten-tin elements near the NLMB. Larger-scale low-resistivity anomalies exist deep in the WYMB, remelting the lower crust and resulting in the formation of porphyry copper in it. Significantly, the upper-mantle low-resistivity anomalies beneath the eastern SCB show a spatial distribution that is gradually shallowing from south to north, probably indicating that the asthenospheric materials are upwelling from south to north, corresponding with the changing progressively of magma and metallogenic activities. We propose that the lithospheric delamination and asthenospheric upwelling caused by the far-field effects of the Paleo-Pacific Plate subduction are the sources of solid magmatic activities and related metallogeny. [ABSTRACT FROM AUTHOR]