Search

Hydrogen sulfide (H2S) is known to participate in bacteria-induced inflammatory response in periodontal diseases. Therefore, it is necessary to quantify H2S produced by oral bacteria for diagnosis and treatment of oral diseases including halitosis and periodontal disease. In this study, we introduce a paper-based colorimetric assay for detecting bacterial H2S utilizing silver/Nafion/polyvinylpyrrolidone membrane and a 96-well microplate. This H2S-sensing paper showed a good sensitivity (8.27 blue channel intensity/μM H2S, R2 = 0.9996), which was higher than that of lead acetate paper (6.05 blue channel intensity/μM H2S, R2 = 0.9959). We analyzed the difference in H2S concentration released from four kinds of oral bacteria (Eikenella corrodens, Streptococcus sobrinus, Streptococcus mutans, and Lactobacillus casei). Finally, the H2S level in Eikenella corrodens while varying the concentration of cysteine and treatment time was quantified. This paper-based colorimetric assay can be utilized as a simple and effective tool for in vitro screening of H2S-producing ability of many bacteria as well as salivary H2S analysis.

Paper waste is a raw material for a lot of products with different added value. The engineering, economic and environmental aspects of paper waste recycling are analysed for production of composite material, cellulose nanofibers and nanocrystals, bricks with paper components, porous carbon, film of biopolymer, enzymatic sugar and bioenergy: bioethanol, hydrogen and biofuel. Through multicriteria analysis, it was possible to determine the most feasible paper waste recycling product in case of four product groups: egg packaging boxes, cardboard, reused paper, cellulose nanomaterials (nanofibers and nanocrystals). The production of cellulose nanofibres and cellulose nanocrystals has an advantage over egg packaging and cardboard production as well as reusable paper.

Lignin in chemical pulping waste, or black liquor (BL), can be converted into various products via supercritical water gasification (SCWG). However, the inherited alkaline contents from the pulping chemicals may affect the product yields and properties. In this research, the influence of the residual alkali on the product distribution via SCWG of soda BL and kraft BL was evaluated. The SCWG was performed in a batch quartz reactor for 10 min at various temperatures (673, 773 and 873 K) and pressures (250, 300 and 400 bar). The highest hydrogen (H2) production occurred at 873 K for the soda BL. The water–gas shift reaction with sodium ions played an important part in the H2 production, while only small amounts of methane and carbon monoxide were detected. Hydrocarbons, carboxylic acids and esters were the dominant substrates in the liquid products, which denoted the potential of this method for bond cleaving of the lignin macromolecule. As a result, BL, which typically contains alkali salt, was an a...

One-time ultrasonication pre-treatment of Rhodobacter sphaeroides was evaluated for improving biohydrogen production via photofermentation. Batch experiments were performed by varying ultrasonication amplitude (15, 30, and 45%) and duration (5, 10, and 15 min) using combined effluents from palm oil as well as pulp and paper mill as a single substrate. Experimental data showed that ultrasonication at amplitude 30% for 10 min (256.33 J/mL) achieved the highest biohydrogen yield of 9.982 mL H2/mLmedium with 5.125% of light efficiency. A maximum CODtotal removal of 44.7% was also obtained. However, when higher ultrasonication energy inputs (>256.33 J/mL) were transmitted to the cells, biohydrogen production did not improve further. In fact, 20.6% decrease of biohydrogen yield (as compared to the highest biohydrogen yield) was observed using the most intense ultrasonicated inoculum (472.59 J/mL). Field emission scanning electron microscope images revealed the occurrence of cell damages and biomass losses if ultrasonication at 472.59 J/mL was used. The present results suggested that moderate ultrasonication pre-treatment was an effective technique to improve biohydrogen production performances of R. sphaeroides.

A novel paper electrode-based flexible pressure sensor modified with multiwalled carbon nanotubes was designed for point-of-care (POC) immunoassay of carcinoembryonic antigen (CEA) with digital multimeter readout. The portable POC testing device consisted of flexible pressure sensor equipped with a paper electrode and connected through syringe tubing to a single-break microplate. The immunoreaction was initially carried out on the microplate with a sandwich-type assay format using platinum nanozyme-labeled secondary antibody for the gas generation. Upon addition of hydrogen peroxide (H2O2), platinum nanozyme (catalase-like mimic) reduced it into hydrogen oxide and oxygen (O2). The overflowing oxygen gas increased the pressure of the multiwalled carbon nanotube-functionalized paper electrode in a homemade pressure-tight system, and the increased pressure could be readily monitored using the paper electrode-based flexible pressure-tight sensor with a digital multimeter readout. The detectable signal mainly ...

In this study, a microbial consortium from an acid-treated rumen fluid was used to improve the yields of H2 production from paper residues in batch reactors. The anaerobic batch reactors, which contained paper and cellulose, were operated under three conditions: (1) 0.5 g paper/L, (2) 2 g paper/L, and (3) 4 g paper/L. Cellulase was added to promote the hydrolysis of paper to soluble sugars. The H2 yields were 5.51, 4.65, and 3.96 mmol H2/g COD, respectively, with substrate degradation ranging from 56 to 65.4 %. Butyric acid was the primary soluble metabolite in the three reactors, but pronounced solventogenesis was detected in the reactors incubated with increased paper concentrations (2.0 and 4.0 g/L). A substantial prevalence of Clostridium acetobutylicum (99 % similarity) was observed in the acid-treated rumen fluid, which has been recognized as an efficient H2-producing strain in addition to ethanol and n-butanol which were also detected in the reactors.

A comparative evaluation of paperboard mill sludge (PMS) versus mixed culture bacteria (MCB) as inoculum for hydrogen production from paperboard mill wastewater (PMW) was investigated. The experiments were conducted at different initial cultivation pHs, inoculums to substrate ratios (ISRs gVS/gCOD), and hydraulic retention times (HRTs). The peak hydrogen yield (HY) of 5.29 ± 0.16 and 1.22 ± 0.11 mmol/gCODinitial was occurred at pH = 5 for MCB and PMS, respectively. At pH of 5, the HY and COD removal achieved the highest values of 2.26 ± 0.14 mmol/gCODinitial and 86 ± 1.6% at ISR = 6 for MCB, and 2.38 ± 0.25 mmol/gCODinitial and 60.4 ± 2.5% at ISRs = 3 for PMS. The maximum hydrogen production rate was 93.75 ± 8.9 mmol/day at HRT = 9.6 h from continuous upflow anaerobic reactor inoculated with MCB. Meanwhile, the 16S ribosomal RNA (rRNA) gene fragments indicated a dominance of a novel hydrogen-producing bacterium of Stenotrophomonas maltophilia for PMS microbial community. On the other hand, Escherichia fergusonii and Enterobacter hormaechei were the predominant species for MCB.

This study presents dark fermentative hydrogen gas production from acid hydrolysed waste paper towel hydrolysate. Firstly, Box-Behnken statistical experiment design was used to investigate glucose production from waste paper towel by acid hydrolysis. S/L ratio, hydrolysis time and pH were chosen as independent variables while glucose concentration in the hydrolysate was the objective function. Highest glucose concentration of 32.17 g/L was obtained at S/L ratio of 100 g/L, pH 0 (gauge pH) and 180 min hydrolysis time. All variables were found to have significant effect on glucose formation. Glucose concentration increased by increasing the S/L ratio and hydrolysis time, but decreased by increasing the pH. Secondly, the hydrolysate obtained at most convenient hydrolysis conditions was subjected to lime putty treatment for the removal of 5-HMF and SO4 2-. Thirdly, H2 gas was produced from the detoxified hydrolysate by dark fermentation. Maximum H2 formation yield, rate and H2 percentage in the gas phase were 1.02 mol H2/mol glucoseconsumed, 130.22 mL H2/g biomass.h and 43%, respectively. The remaining 5-HMF after lime treatment was effectively removed in dark fermentation. © 2017, Springer Science+Business Media Dordrecht.

Waste newspaper (WP) was first co-pyrolyzed with high-density polyethylene (HDPE) using pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) to enhance the yields of alcohols and hydrocarbons. The effects of WP: HDPE feed ratio (100:0, 75:25, 50:50, 25:75, 0:100) and temperature (500-800°C) on products distribution were investigated and the interaction mechanism during co-pyrolysis was also proposed. Maximum yields of alcohols and hydrocarbons reached 85.88% (feed ratio 50:50wt.%, 600°C). Hydrogen supplements and deoxidation by HDPE and subsequently fragments recombination result in the conversion of aldehydes and ketones into branched hydrocarbons. Radicals from WP degradation favor the secondary crack for HDPE products resulting in the formation of linear hydrocarbons with low carbon number. Hydrocarbons with activated radical site from HDPE degradation were interacted with hydroxyl from WP degradation promoting the formation of linear long chain alcohols. Moreover, co-pyrolysis significantly enhanced condensable oil qualities, which were close to commercial diesel No. 0.

The objective of this work was to investigate the influence of hydrogen bonds between fibres on static and dynamic strength properties of paper. A commercial bleached pinewood kraft pulp was soaked in water, refined in a PFI, and used to form paper webs in different solvents, such as water, methanol, ethanol, n-propanol and n-butanol, to determine the effect of their dipole moment on static and dynamic strength properties of resulting paper sheets. Paper which was formed in water, being the solvent of the highest dipole moment among the tested ones, showed the highest breaking length and tear resistance. When paper webs were formed in n-butanol, which was the least polar among the solvents, these parameters were reduced by around 75%. These results provide evidence of the importance of water in paper web formation and strong impact of hydrogen bonds between fibres on strength properties of paper.

Waste paper was evaluated for hydrogen gas production by sequential dark fermentation and electrohydrolysis. Acid hydrolysed waste paper towel hydrolysate was first subjected to dark fermentation to determine the most suitable initial biomass concentration. The effects of initial biomass concentration was investigated at constant substrate concentration by varying the biomass concentration between 0 and 6 g/L and the most suitable hydrogen production was obtained at 0.10 g/L. Then effects of initial substrate concentration was investigated at 0.10 g/L initial biomass concentration by varying the glucose concentration between 5 and 40 g/L. 21.33 g glucose/L resulted in the highest hydrogen formation yield and rate in the second set of experiments. When the effluent of dark fermentation operated at optimum initial biomass and substrate concentration was subjected to electrohydrolysis the overall hydrogen production of the sequential process was 30.12 mL H2/mL. © 2015 Hydrogen Energy Publications LLC.

This study investigated the use of calcined-lime mud from papermaking process (CLMP) pretreatment to improve fermentative hydrogen yields from corn-bran residue (CBR). CBR samples were pretreated with different concentrations (0-15 g/L) of CLMP at 55°C for 48 h, prior to the thermophilic fermentation with heat-treated anaerobic sludge inoculum. The maximum hydrogen yield (MHY) of 338.91 ml/g-VS was produced from the CBR pretreated with 10 g/L CLMP, with the corresponding lag-phase time of 8.24h. Hydrogen yield increments increased from 27.76% to 48.07%, compared to the control. The CLMP hydrolyzed more cellulose, which provided adequate substrates for hydrogen production.