Search

A novel analysis for a new type of variable reluctance resolvers (VR-Resolvers) with toroidal windings based on the magnetic equivalent circuit (MEC) method is presented in this work. Different cases including various windings configurations as well as different rotor structures are considered in order to investigate the performance of the resolver precisely. The position error of both healthy and eccentric resolvers are studied by a flexible MEC model. The effect of the eccentricity fault on the resolvers with different specifications is also evaluated to analyze the manufacturing tolerance due to the eccentric rotor for several cases. It is notable that the presented MEC provides the opportunity to adjust accuracy and model several structures in both healthy and faulty conditions by just a single model. Finally, the MEC results are confirmed by finite element method and experimental results to show the effectiveness of the proposed model. In general, development of a new VR-Resolver and analyzing its performance under different windings configurations and rotor structures by proposing a modified MEC approach are the paper novelties. [ABSTRACT FROM AUTHOR]

This paper presents a dynamic thermal model which predicts the winding temperature of electrical machines at steady-state and transient conditions where windings are used in integrated battery chargers (IBCs) for DC charging in a stationary position. Using winding in high current charging process causes rising winding temperature which affects insulation life. Switched reluctance machines are a proper choice for using in electric vehicles (EVs) because of their advantages such as simple and sturdy structures. IBCs can reduce volume and weight of EVs and total cost is diminished because of integration. The analytical thermal model proposed in this paper can calculates the winding temperature in balanced and unbalanced currents injection because of the phase inductance in each rotor angle is distinct, so current excitation in each phase should be different for obtaining zero total torque and keeping rotor in a stationary position, also a reduced-order model is proposed with minor impact on the accuracy of the model. Special attention has been paid to monitor the winding temperature with considering the motor lifetime in DC charging mode, this view has not been addressed in IBCs before. The proposed model is then validated against experimental results and 3D finite element method. [ABSTRACT FROM AUTHOR]

In this study, an investigation of winding structures is performed for 3-phase unbalanced and asymmetric winding permanent magnet (PM) machines including different slot-pole combinations. There are two different cases for unbalanced winding (UBW) structure: 1) Stator slot number of the machine is divisible by three, 2) Stator slot number of the machine is not divisible by three. Only the first case is examined in this paper. The unbalanced winding layouts are created for minimum unbalance and maximum winding factor. Total magneto motive force (MMF) distributions for nine different slot-pole combinations and their harmonic contents are presented. Variation of the amount of unbalance for different slot-pole combinations is also provided in the paper. Key issues arising from the asymmetric and unbalanced windings such as degree of asymmetric and unbalanced magnetic pull are explored. A prototype motor with 39-slots and 12-poles has been manufactured for experimental verification. A comparison between the finite element analysis (FEA) results and experimental results is presented for the prototype motor for both no-load and on-load conditions. It is shown that the asymmetric and unbalanced winding PM motors have significant potential for applications requiring smooth torque operation. [ABSTRACT FROM AUTHOR]

The vibration characteristics of stator system of the interior permanent magnet synchronous motor for EV are deeply studied in this paper, the effectiveness of reducing the vibration by optimizing the vibro-inertance (acceleration admittance) of the stator system is validated. Firstly, the theory of the vibro-inertance matrix of stator system with single-point excitation and multi-point response is proposed, and the mathematical theory model of vibro-inertance matrix of prototype motor stator system is established. Secondly, a new method of 3D finite element method (FEM) be used to simulate and analysis the vibro-inertance's characteristics for the prototype's stator system. Then, the correctness of the theory and the FEM simulation is verified by the prototype source-path-contribution (SPC) experiment. And it is found that near some non-natural frequencies with large vibro-inertance amplitudes, although the amplitude of operating force is relatively small at these frequencies, the prototype still produces large vibrations. Finally, three methods for optimizing the vibro-inertance matrix of the stator system are further studied. These methods can effectively shift the inertance frequency band of the stator system and change the average value of the inertance's amplitude of the motor stator system in different frequency bands, thereby changing the vibration characteristics of the whole motor. [ABSTRACT FROM AUTHOR]

This paper investigates the influence of stator/rotor pole number combinations and permanent magnet (PM) numbers on electromagnetic performance of consequent-pole hybrid excited flux reversal machines (CP-HEFRMs), which have different numbers of PM poles and iron poles and concentrated AC and DC windings on the stator and a salient pole rotor. PMs in the slots of one stator pole are magnetized radially in the same direction, while opposite on adjacent stator poles. Magnetic field paths of DC, PM, and hybrid excitations are investigated. The phenomenon of flux cancellation, i.e., PM and DC MMFs in CP-HEFRMs are of opposite polarities in the flux-enhancing operating mode, is revealed and verified, for the first time, as the key feature that makes CP-HEFRMs different from other hybrid excited machines. Consequently, the saturation in stator pole and yoke can be mitigated and hence the overload capability of DC excitation is enhanced, which is verified by finite element analysis (FEA). Global optimizations are utilized to obtain the optimal rotor and stator pole number combinations and PM numbers for each stator pole. Torque, torque ripple, inductance, unbalanced magnetic force, and flux regulation capability are compared for different PM numbers and rotor pole numbers. Comparisons are made on consequent-pole and non-consequent-pole topologies in terms of torque capacity, flux regulation capability, and PM consumption to further illustrate the advantages of consequent-pole topology. A prototype machine is built and tested to validate the analyses. [ABSTRACT FROM AUTHOR]

Consequent-pole (CP) permanent magnet (PM) configuration suffers asymmetric electromagnetic characteristics although it saves PM usage. The CP-based stator-PM synchronous machines are investigated in this paper, with particular reference to symmetrical issues. The electromagnetic performances of the CP-based stator-PM synchronous machines are firstly evaluated. Afterwards, the rule of even order harmonics cancellation is presented for different slot/pole number combinations and winding layouts, based on which symmetrical phase flux-linkages can be obtained although the unbalanced magnetic flux naturally occurs. Moreover, based on the three-dimensional finite element analysis, the unipolar end leakage-flux caused by the asymmetric magnetic field is identified, and the risk of the shaft magnetization is revealed. Finally, a pair of prototype machines are fabricated and measured to validate the analyses. [ABSTRACT FROM AUTHOR]

This paper presents an analytical approach to determine the air-gap magnetic field and the winding inductance in the brushless doubly-fed reluctance machine (BDFRM) with flux barriers. By dividing one flux guide layer into several segments, a calculus method based on magnetic circuit analysis is developed and specific analytical expression of the air-gap flux density is rigorously derived. Then, the included angle between fundamental components with the same pole pairs is also discussed. Based on the air-gap flux density distribution, the inductance expressions between different windings are also presented. Three kinds of finite element analysis models are established and studied. As a result, the accuracy of the analytical model can be verified by simulations and experimental data from an existing BDFRM prototype. [ABSTRACT FROM AUTHOR]

Asymmetric interior permanent magnet (AIPM) rotor topologies can achieve torque enhancement in IPM synchronous machines without the increase of PM usage due to utilizing magnetic-field-shifting (MFS) effect by reducing the current angle difference between maximum PM and reluctance torque components. This paper investigates the influence of armature reaction on MFS effect in AIPM machines. A general model of IPM machines considering MFS effect is analytically developed and the AIPM and IPM machines using the same stator, rotor diameter and total PM amount are comparatively studied. It shows that the armature reaction affects the MFS effect in both AIPM and IPM machines and the influence is more significant in AIPM machine. The relationships between MFS effects in PM flux-linkage and inductance characteristics and current angles for maximum PM and reluctance torque components are revealed. It confirms that the change of current angles of torque components is due to the MFS effect in PM flux-linkage and inductance characteristics in both AIPM and IPM machines. Besides, the developed machine model considering MFS effect is verified by finite element analysis. Finally, a small-scale AIPM machine prototype is fabricated and measured to validate the finite element analysis. [ABSTRACT FROM AUTHOR]

Special attention has been paid to two-phase switched reluctance motors (SRMs) as they have fewer power electronics components compared to three- or multi-phase ones. However, their main drawbacks are the lack of starting torque and a predetermined direction of rotation. This paper proposes a new self-starting technique for two-phase SRMs, which has superiorities over the previous approaches. In the proposed topology, the flux paths are shorter, and thus the required magnetomotive force is smaller, which reduces losses. The design procedure is explained. Two- and three-dimensional finite element method (FEM) is employed in the analysis. Also, the motor is prototyped, and two test setups for torque-angle measurement and control study are used. The dynamic behavior of the motor is studied applying single-pulse control and current hysteresis control strategies. The experimental results confirm the results obtained by FEM. Both simulation and experiment results confirm that the proposed topology offers higher efficiency, higher mean torque, and better dynamic behavior compared to two conventional SRMs. [ABSTRACT FROM AUTHOR]

In this paper, a novel six-phase outer rotor induction motor equipped with pseudo-concentrated windings is introduced as a robust, reliable, and low-cost solution. Multiple aspects of the proposed motor structure have been investigated such as a design algorithm and an analytical modeling based on the modified winding function considering the skew effect. The effect of using variable number of turns for the coils has been examined on the pseudo-concentrated windings. An appropriate optimization problem has been also defined to maximize the power factor and efficiency and to minimize the output torque ripple. The designed motor has been fabricated to verify the accuracy of the design procedure with an analytical model and a finite element analysis. Experimental results show superior performances for the designed motor. [ABSTRACT FROM AUTHOR]

Linear permanent magnet Vernier machines (LPMVMs) is an attractive solution for stroke and direct-drive applications. Several LPMVM topologies have been presented for different applications that operate based on magnetic flux modulation. LPMVMs have some advantages including high force, and torque density at low speeds. This paper introduces a double-excited linear Vernier machine for wave energy conversion. To model the machine, finite element analysis and nonlinear equivalent network model are used. To improve the accuracy of the model and compact the network, a new meshing method is proposed. For better continuity in the output waveforms of the machine, special positioning is utilized. The end-effect is modeled using two separate networks. Finally, the modeling and simulation results are compared with each other and validated experimentally. [ABSTRACT FROM AUTHOR]

It is recognized that the rotor with shielding cylinder (SC) is one of the effective measures to restrain the rotor eddy current loss (RECL) for high-speed surface-mounted permanent magnet synchronous motors (PMSMs). At present, the RECL of PMSMs with multilayer composite rotor structure is mainly analyzed by the finite element method (FEM), which has obvious shortcomings in time-consumption and the mesh generation of thin SC. In this paper, a multi-layer subdomain analytical model for calculating the RECL of high-speed PMSMs with both non-ferromagnetic retaining sleeve and SC is proposed by taking the effects of eddy current reaction, stator slotting and current harmonics into account. Moreover, the 3-D distribution coefficient of eddy current in the SC is derived by the equivalent impedance method and the effects of temperature on the conductivity of the SC and RECL are obtained through equivalent thermal network (ETN) model. Based on the analytical model, the SC parameters are calculated to obtain the variation ranges when the RECL is minimum. Finally, the C-shape core experiment was built up to verify the correctness of the multilayer analytical model under different shielding layer conductivities and thicknesses. [ABSTRACT FROM AUTHOR]

The design rules of winding configurations and stator-pole/rotor-tooth (SP/RT) number combinations of doubly-fed flux-switching permanent magnet (DF-FSPM) machines are investigated in this paper based on coil electromotive force (EMF) vectors. The relationships between the components of stator and rotor coil-EMF vector diagrams are unveiled at first, including the numbers of stator and rotor phases, and the numbers of stator and rotor spokes. Then, the SP/RT number combinations are derived considering feasible stator/rotor phase number combinations and different winding configurations. The SP/RT number combinations are optimized considering the winding factors, magnetic field harmonics, unbalanced magnetic forces and machine diameter. It is shown that both of the stator and rotor pitch factors increase when the SP and RT numbers get closer. Furthermore, the influence of winding configurations and SP/RT number combinations on electromagnetic performances of DF-FSPM machines are analyzed by finite-element method. Finally, the analysis results are validated by experiment. [ABSTRACT FROM AUTHOR]

The stator winding acts as a carrier for the electrical load, and its loss accounts for about 50% of the total loss in AC machines. So how to design the stator winding for reducing winding loss is extremely crucial. Some traditional transposition methods are adopted in the winding design for large AC machines. Although they have a certain effect on reducing winding loss, there is still room for the improvement in the winding design and manufacturing technology. In this paper, a new global transposition method of stator winding is proposed. Then a megawatt driving motor is taken as the research object, and the eddy current losses, circulating current losses and total losses of winding strands are calculated by the three dimensional (3-D) finite element method (FEM) which has been validated by the experiment. In addition, by comparison with the two original transposition methods, it is proved that the proposed global transposition method is more effective in further reducing the winding loss, and the winding loss distribution is more uniform. This global transposition method proposed in this paper provides a reference for the optimal deign of the stator winding in AC machines. [ABSTRACT FROM AUTHOR]

Brushless doubly fed induction machine (BDFIM) which is able to operate in both induction mode and synchronous mode, has received increasing attention of researchers, in the last three decades. It could be considered as an emerging competitor for older structures, due to the substantial features such as brushless structure and requiring a fractionally rated frequency converter. The iron loss which constitutes a significant portion of total power losses is higher in BDFIM in contrast with standard induction machine. Even though it is essential to consider the iron loss effect on dynamic behavior of BDFIM, there is still no comprehensive study in the literature. The aim of this paper is to propose a dynamic model of BFIM in general reference frame in which the iron loss is taken into account. This model which is credible for all BDFIM operation modes including synchronous one, facilitates the performance analysis of BDFIM and implementation of the various control techniques. The supplementary simulations and experiments confirm that the proposed model is an appropriate candidate for BDFIM drives. Because of the complex structure of BDFIM, determination of the iron loss isn't straightforward. In this paper, a practical approach is introduced to calculate the iron loss of BDFIM in terms of frequency variations. The experimental data derived from a D132s prototype BDFIM is then compared with the calculated data from the finite element analysis (FEA). [ABSTRACT FROM AUTHOR]

This paper proposes a new method to estimate the electrical parameters of five-phase induction motors based on the response to a step voltage applied to the stator with the rotor at standstill. The first part of the method consists of the identification of the parameters of the dynamic model expressed in terms of transfer functions including the fundamental and third-harmonic components of the airgap induction. The second part consists of an open-phase test proposed to estimate the stator leakage inductances of each circuit separately. Further, the impact of iron saturation on the parameters is discussed through Finite Element Analysis of a case study. The accuracy of the proposed method is experimentally assessed through the analysis of the behavior of a 4.5-kW motor running in a closed loop under Rotor Field-Oriented Control. The theoretical and practical results suggest that the method can also be applied to self-commissioned drives, given that the estimation proceeds under null torque and speed. The prominent advantages of the proposed method are (i) the possibility of tracking the saturation effects on the parameters, (ii) the tests are easy to execute, and (iii) few sensors are required. [ABSTRACT FROM AUTHOR]

This paper formulates the difference in base frequency and maximum torque between distributed and concentrated windings taking into account the air-gap modulation of concentrated-winding permanent magnet (PM) motors. The design superiority is typically confirmed for each winding type during a development period by using time-consuming finite element analysis (FEA). We propose a quantification that enables motor designers to easily judge, at the initial design stage, a superior winding type and to shorten a design period. Throughout our formulation, we found that the distributed-winding PM motors, in principle, have larger q-axis inductance and smaller d-axis inductance than the concentrated-winding motors, which leads to a decrease in the base frequency. On the other hand, the distributed winding inherently has higher winding factor and needs shorter stack length of core than the concentrated winding for identical torque output, which results in an increase in the base frequency. And also, we theoretically quantified the difference in reluctance-torque contribution between the two winding types and found that it was too small to have much impact on practical design. We applied the proposed formulae to a 0.2-kW concentrated-winding Nd-Fe-B magnet motor and were able to quantify the base frequency, the maximum torque, and the minimum stack length of core for a distributed-winding motor with high accuracy without having to rely on FEA. The FEA and measurement results demonstrated the validity of the proposed approach for the fabricated distributed-winding PM motor. [ABSTRACT FROM AUTHOR]

This paper studies the vibration and noise analysis of flux-modulation double-stator electrical-excitation synchronous machine (FM-DSEESM) in both no-load mode and on-load mode by using the mode superposition method. First, the theoretical excitations of vibration and noise, namely the radial electromagnetic force harmonics, are deduced and classified by their sources. Second, the finite element analyses (FEA) of these radial electromagnetic force harmonics are analyzed via Fourier decomposition and compared to their theoretical results for validation. Third, to perform the vibration and noise analysis, the modal test is conducted, and the modal FEA model is established based on the tested modal results. Also, the radial electromagnetic forces are coupled with the modal FEA model to conduct the vibration and noise analysis, and the responses of sound power levels in A-weighting are calculated. By using the modal participating factors, the main contributing modes are determined in the vibration and noise responses. [ABSTRACT FROM AUTHOR]

Partial demagnetization is a condition that may occur in Permanent Magnet machines due to overloading or thermal stress. Whenthis happens, the magnetic field locally weakens leading to an asymmetry of the air-gap field. This asymmetry will cause harmonics, which will be expressed as extra losses and mechanical oscillations. Moreover, since the field becomes weaker, more current is required to serve the load leading to less efficiency, increased losses and consequently increase of the temperature, which will cause further progression of the demagnetization severity until a total machine breakdown. Several methods have been proposed in the literature for the online detection of the demagnetization, however they have not related the fault to the manufacturing characteristics of the machine, which play an important role on the expected harmonic index and the associated fault signatures. This paper presents for the first time a detailed analytical investigation of the expected harmonics in the stator current spectrum in case of demagnetization, as a function of the stator winding and number of poles. The analytical results are verified by extensive simulations via the finite element method and experimental testing. [ABSTRACT FROM AUTHOR]

The main idea of this paper is to offer a continuous C-cores unique configuration for switched reluctance motor (SRM) and to present an analytical model for its analysis. The advantages of this structure are having a short path for the main part of the magnetic flux, resulting in less core losses and as well as less negative torque. On the other hand, there is less leakage flux in the proposed structure. Another advantage of this structure is that it has a high mean torque compared to conventional structures, so that this increase in mean torque also increases a small amount of torque ripple, which is negligible. However, power density at a constant volume increases relatively much. The proposed SRM is analyzed by the finite element method (FEM) and by employing a magnetic flux density pattern and magnetic fluxes path, its magnetic equivalent circuit (MEC) is obtained. In this MEC model, the main fluxes and leakage fluxes are fully modeled. After its complete analysis, electromagnetics torque, inductance, flux-linkage, mean torque, and peak torque are evaluated. Static and dynamic performances are then determined. Finally, the proposed SRM was prototyped and tested. The experimental results consisting of static torque, flux-linkage, voltage, and current waveforms and input power are compared with the corresponding results in the MEC model and FEM. The comparisons verify the accuracy and validity of the introduced analytical model. Besides, static torque, flux-linkage characteristics, and dynamic performance at a nominal speed of 1000 rpm and the current chopping control mode with chopping 5A under the load of the proposed SRM are compared with the conventional SRM and its merits are observed. [ABSTRACT FROM AUTHOR]

A novel asymmetric interior permanent magnet (AIPM) machine is proposed in this paper for electric vehicle application. It has a skewed V-shape permanent magnet (PM) cavity, two PMs with different dimensions and an additional flux barrier outside the V-shape cavity in each pole. This asymmetric rotor topology can inherently utilize the magnetic-field-shifting (MFS) effect to reduce the current angle difference between the maximum PM and reluctance torque components, thereby enhancing the maximum synthetic torque with the same PM usage. The influences of cavity positions in the proposed AIPM and an existing AIPM with extra flux barrier inside the V-shape cavity are investigated and compared using finite element analysis. It is found that the proposed structure with outside flux barrier has higher average torque than the one with inside flux barrier. Both AIPM topologies are designed with the same stator, rotor diameter, and PM usage as the conventional V-shape IPM benchmark for Prius 2010. Electromagnetic, mechanical and steady-state thermal performance of three machines are compared. The results confirm that the proposed AIPM machine can achieve significant torque enhancement due to utilizing MFS effect, compared with the existing AIPM and the IPM benchmark. Finally, a small prototype of the proposed AIPM machine is designed, manufactured and tested to validate the FE analysis. [ABSTRACT FROM AUTHOR]

This paper proposes a novel high-temperature superconducting stator-excited axial-flux magnetic gear (HTS-SEAFMG) for the high-torque transmitting system. The proposed magnetic gear combines the merits of both HTS-excitation and stator-excitation. By using the HTS-excitation, a high air-gap flux density can be easily obtained, thus achieving the high torque density. The HTS-excitation windings are placed on the stator with a static seal of cooling Dewar which greatly reduces the manufacturing difficulty and the cost of refrigeration system compared with the dynamic seal. Thanks to the stator-excitation pattern, both the high-speed rotor and the low-speed rotor comprise only iron, thus contributing to the high mechanical reliability. The axially sandwich structure can also simplify its assembly in the high torque transmission applications. The dimensional parameter optimization and the electromagnetic performance evaluation are conducted by using the finite element method, respectively. The results show that the torque density of the proposed HTS-SEAFMG can reach 123 kNm/m3. Theoretical analysis and results are both given to verify the feasibility of the proposed HTS magnetic gear design. [ABSTRACT FROM AUTHOR]

This paper proposes and analyzes a novel radial partitioned stator HTS-excitation flux-switching (RPS-HTSFS) machine. The key is that the single ring-shaped HTS-excitation coil is independently placed in the coaxial claw-pole outer stator while the armature windings are wound around the U-shaped iron core on the inner flux-switching armature stator without permanent magnets. This solution has been explored to realize the physical isolation of armature winding and excitation winding, relieving the influence of armature field on the HTS-excitation coil. Moreover, only a single ring-shaped HTS-excitation coil is employed, therefore, reducing the HTS wires and the bending strain of the HTS-excitation coil. Also, the special refrigeration system can realize stationary seals of the double-layer ring-shaped cooling Dewar pattern, improving the cooling performance. By using the three-dimensional finite element analysis (3D-FEA), the machine performances are investigated and the validity of the proposed machine is verified. [ABSTRACT FROM AUTHOR]

Double-Sided Linear Flux-Switching Permanent Magnet (DSLFSPM) motor has the merits of high efficiency, high power factor and low-cost stator structure. But the speed range of DSLFSPM is limited due to its adoption of permanent magnets. Double-Sided High Temperature Superconducting Linear Flux-Switching Motor (DSHTS-LFSM) adopts HTS coils to replace the permanent magnets, thus obtaining better power density and wider speed range. However, when the magnetic field gets much stronger, the iron core is easily saturated and flux leakage gets serious, which threatens the reliability of HTS coils and lowers the utilization of iron core. To solve this problem, a novel Double-Sided High Temperature Superconducting Linear Modular Flux-Switching Motor (DSHTS-LMFSM) is proposed. The armature windings are designed different from existing DSHTS-LFSMs to reduce flux leakage. Furthermore, by sealing the HTS coils together in a Dewar away from armature windings, the reliability is improved. In this paper, the structure and working principle of the proposed DSHTS-LMFSM is explained. The electromagnetic performance of it is calculated using Finite Element Method (FEM). As evaluation, its performance is compared against a traditional DSHTS-LFSM. [ABSTRACT FROM AUTHOR]

The transverse flux permanent-magnet (PM) linear machine has attracted much attention in high-performance direct-drive applications because of its high torque density and efficiency. However, due to its inherent large open-circuit flux leakage, the prominent cogging force makes it difficult to obtain a high accuracy in position and speed control, which restricts its potential for precision industrial processing applications. To overcome this problem, a novel transverse flux linear machine is proposed in this paper. The key is by creatively combining a consequent-pole mover design and a stator-segment-interlacing configuration in such a way that a parallel and complementary transverse magnetic circuit is realized for the moving PMs, which can effectively minimize the open-circuit leakage flux and cogging effect. In this paper, the machine structure, operation principle, and theoretical modeling are introduced, with its electromagnetic performance evaluated by using the finite-element method. A prototype is also built for the experimental verification, and relevant test results agree well with the finite-element predications. [ABSTRACT FROM AUTHOR]

An optimal three-dimensional current computation flux weakening control strategy for dc-biased Vernier reluctance machines (VRMs) is proposed in this paper. Compared with permanent magnet synchronous machines, dc-biased VRMs have an additional degree of freedom to regulate the rotor flux through variable dc-biased armature current. The conventional flux weakening control strategy does not utilize the adjustable dc field current, and the output capacity in the flux weakening region is limited. In this paper, the optimal three-dimensional current distribution is calculated at the intersection of current and voltage constraint. Meanwhile, in order to maintain the armature voltage within the voltage constraint, the inductance nonlinearity is reflected by constructing the inductance table. The algorithm provides maximum output capability and high efficiency for dc-biased VRMs despite the changes in inductance parameters in the whole flux weakening region. Finally, the effectiveness of the proposed control strategy is validated by experimental results for a prototype machine. [ABSTRACT FROM AUTHOR]

A new partitioned stator (PS) hybrid excitation (HE) machine with slot Halbach permanent magnet (PM) arrays is proposed in this paper. Due to the adoption of PS structure, its armature winding (AW) is located in the outer stator, and the PMs and the field winding (FW) are housed in the inner stator, thus the space utilization is significantly enhanced. The key difference of proposed machine is that Halbach PM arrays are employed in the inner stator slot openings, so that the parallel magnetic circuit between PM field and wound field is performed and the ratio of PM field short-circuited in the inner stator is effectively reduced. Thus a wider speed regulation region and a higher torque/power density can be achieved. Firstly, the configuration of proposed machine is described, based on which its operating principle is discussed. Then the electromagnetic performances are calculated and compared based on 2-dimensional finite element analysis (FEA). The results show that the torque can be improved by 76% with a similar magnetic field regulation ratio compared with an existing PS-HE machine with slot PMs. Finally, a prototype machine is built and tested to verify the analysis and FEA results. [ABSTRACT FROM AUTHOR]

Nowadays, finite element analysis represents the most accurate tool to analyse electrical machines. However, the time domain resolution of electromagnetic problem, in some cases, requires long simulation time due to the induced nature of the currents. The computational burden increases when the machine features a skewed layout on the stator or rotor structures, since this requires 2D multi-slices approximated analysis or even a full 3D model. In this paper, a general analytical method to model electromagnetic devices is applied to a squirrel cage induction motor featuring a skewed rotor structure. The modelling approach is wisely implemented and adapted to pursue a fair balance between accuracy of the analysis and computational burden, taking advantage of all the symmetries existing in the rotor cage of the machine, aiming to minimize the model complexity. A comparative analysis in term of the inductances between analytical and finite element is proposed. The results provided by the model developed are compared with respect to the corresponding values provided by both finite element and experimental test performed on the reference machine. Such comparisons show that the proposed model is actually able to achieve a pretty good balance between accuracy and computational efficiency. [ABSTRACT FROM AUTHOR]

The paper details modern saturation modeling and performance calculation to the analysis of grid-connected cylindrical wound-rotor synchronous motors. The developed models give reliable results with limited computation effort. The finite element based method uses iterative procedures to calculate the motor performance during which the motor parameters are evaluated in detail. Experimental results prove that the method has a high degree of accuracy and is computationally efficient. [ABSTRACT FROM AUTHOR]

This paper presents a detailed analysis of short circuit fault (SCF) in wound rotor (WR) resolvers. For this purpose, an analytical model based on winding function (WF) method is developed considering the stator and rotor windings’ fault, the severity of the fault, the phase of the stator faulty winding, and the tooth of shorted turns. The proposed model leads to a comprehensive understanding of the SCF behavior of WR resolvers and also leads to define proper fault detecting signatures. All the predictions are verified by time stepping finite element analysis as well as the experimental tests on two prototyped resolvers. [ABSTRACT FROM AUTHOR]

The fault-tolerant capability is a prerequisite for electrical safety-critical applications. In this regard, multi-phase induction motors are well-known actuators used to provide this feature. Compared to conventional three-phase machines with distributed windings, induction machines having concentrated windings could be more fault-tolerant because of increasing the number of phases. In addition, concentrated windings have shorter end-winding and less required copper weight which makes it a lower cost solution compared to distributed windings. However, concentrated windings adversely increase the distortion of the air gap flux density which affects motor performances. In this paper, a pseudo-concentrated winding layout has been proposed for six-phase squirrel-cage induction motors to improve performances compared to conventional concentrated windings. Winding function and equivalent circuit methods are used to analytically calculate performances. Finally, time-stepping finite element method and experimental measurements have been presented to confirm obtained analytical results. [ABSTRACT FROM AUTHOR]

Inverter driven electrical machines need resolver for position estimation and efficient electronic commutations. In this paper, the resolver signals are also used for the purpose of mechanical fault diagnosis. Therefore, a comprehensive procedure based on winding function (WF) method is presented to propose a noninvasive index to identify the mechanical fault's type (static/dynamic eccentricity) and even its percentage. In this regard, once the resolver signals are measured and saved in health condition. Then, during the operation of the motor, calculating the proposed index using the healthy and faulty signals leads to predict the fault type and its percentage. The success of the proposed index is verified using transient finite element analysis and experimental measurements on the prototype resolver. [ABSTRACT FROM AUTHOR]

Axial flux induction motors have attracted attention in electric vehicles due to their advantages over conventional motors, including higher efficiency, compact structure, high utilization of materials, and good ventilation and cooling. This paper provides a fast design method for two-stator-one-rotor axial flux induction motor of electric vehicle applications. The proposed method consisting of an accurate motor analytical model and a design variables optimization method based on genetic algorithm. Unlike traditional design of axial flux induction motor with single objective, multi-objective is considered in this work. Based on the proposed method, the performance of axial flux induction motor can be simulated and optimized in much shorter time compared with finite element analysis in ANSYS Maxwell. The comparison results from ANSYS Maxwell can prove the effectiveness and accuracy of the proposed method, and the performance of the final designed motor can meet all the design requirements. [ABSTRACT FROM AUTHOR]

This paper proposes a new parallel-hybrid-excited permanent-magnet machine (PHEM) with harmonic-differential (HD) effect, termed HD-PHEM. The key is to place the DC-field windings in the DC pole sandwiched by the two adjacent permanent-magnet (PM) poles, thereby realizing the parallel flux paths of PM flux and DC-field flux. Moreover, the HD effect is created so that the DC-field harmonics can differentiate the effective and ineffective harmonics in the air gap to weaken the resultant effective magnetic field. Consequently, attractive flux-weakening ability and extended speed-operating range can be achieved for electric vehicle propulsion. The machine configuration, operation principle, torque-sizing equation and drive system are introduced first. Then, the harmonic analysis is conducted to elaborate on the HD effect, followed by the finite-element verification. Besides, both the electromagnetic and structural performances of the proposed machine are comprehensively evaluated by finite element analysis. Further, a comparative study is performed between the proposed design and other existing topologies in terms of electromagnetic performances. Finally, an experimental prototype is constructed and tested for verification. [ABSTRACT FROM AUTHOR]

In this paper, a new topology of a spherical machine, denominated as a shell-like spherical induction machine, which was initially studied in recent published papers, is now designed and optimized for a powered-wheel application. The main objective is to perform an optimization design for the power/volume ratio maximization. The multiobjective/multiconstraint evolutionary algorithm NSGA-II (elitist nondominated sorting genetic algorithm) was used as the optimization tool. This optimization tool provides us a first design and physical insight to be further used in more complex 3-D finite-element analysis (FEA) tools. Thus, the shell-like spherical induction machine electromagnetic and thermal analytical models are first developed. To validate the thermal model, a small-scale prototype was built using a new soft magnetic material as the stator and rotor magnetic core. Tests to the prototype were carried out in our laboratory, measuring its electromagnetic torque and temperature, comparing them with the FEA and analytical results. Then, the optimization problem is defined by describing the objective functions, decision variables, and constraints for the powered-wheel application. Finally, the optimization results are analyzed using the Pareto front approach, showing the evolution of each objective function and decision variable. [ABSTRACT FROM AUTHOR]

In this paper, a novel E-Core transverse flux machine (TFM) is proposed. The machine has a double stator-single rotor configuration with flux concentrating ferrite magnets and pole windings across each leg of an E-Core stator. E-Core stators with the proposed flux-concentrating rotor arrangement result in better magnet utilization and higher torque density. The machine also has a modular structure facilitating simpler construction. This paper presents a single phase and a two-phase version of the E-Core machine. Case study for a 1 kW, 400 r/min machine for both the single phase and two-phase TFM is presented. [ABSTRACT FROM PUBLISHER]

This paper focuses on the analysis and design of a triple-rotor axial-flux spoke-array vernier permanent magnet (TR-AFSAVPM) machine. By cooperating with spoke-array rotor and coil-wounded winding, power factor and torque density of the proposed machine are much improved and its copper utilization is reduced comparing with conventional vernier machines. First, the machine structure and its operation principles are reviewed. After that, analytical equations of its back-electromotive force and torque are derived to reveal the machine characteristics. Based on both quasi-3-D finite element analysis (FEA) and 3-D FEA, its high torque density performance is verified and a set of optimized machine sizing specifications is ultimately settled. A fractional slot axial-flux permanent magnet (VPM) machine and an axial-flux surface VPM machine are designed to compare with the proposed configuration. Analysis results show that the TR-AFSAVPM machine has high power factor viz., 0.96 and high torque density viz., 24.2 kNm/m3. A prototype has been designed and tested to validate the results. No-load test result is illustrated in this paper and the rated load experiment will be added in the future. [ABSTRACT FROM AUTHOR]

This paper presents an optimal design methodology of a dual-mechanical-port bidirectional flux-modulated machine for electric continuously variable transmission in hybrid electrical vehicles. The machine utilizes bidirectional flux modulation effect to combine two rotors and one stator together, aiming to realize electrical and mechanical power flexible split and combination. Due to the complexity of the machine structure, conventional optimization methods using analytical model are inapplicable. Therefore, an effective and practical method that combines the genetic algorithm and finite-element method (GA-FEM) is proposed to optimize the design of the machine in this paper. Since the computational cost increases exponentially with the increasing of number of design parameters, to reduce the computational cost in the optimization process, the design parameters are divided into two levels basing on a sensitivity analysis. And, then, the sensitive parameters are optimized using the GA-FEM coupled method. Finally, a prototype is fabricated to verify the effectiveness of the optimal design. [ABSTRACT FROM PUBLISHER]

In order to increase the torque density of the five-phase machines, the third harmonic is commonly employed. In this paper, the optimal and critical ratios for the third harmonic current injection are analytically derived and validated by finite element (FE) analyses. It is found that the optimal and critical injection ratios along with the torque improvement are dependent on the ratio of the third harmonic back electromotive force to the fundamental one. In order to improve the electromagnetic torque contributed by the third harmonic component, this paper employs unequal tooth to increase both the fundamental and third harmonic winding factors. Meanwhile, the optimal unequal tooth width combination is deduced and demonstrated by the FE method. When the third harmonic current is injected under the same amplitude constraint, the output torque can be improved. When the third harmonic current is injected under the same RMS value constraint, for the ten-slot/eight-pole equal tooth machine, the output torque can barely be increased, whilst for the unequal tooth machine, the output torque can be increased by 2.1%. Finally, the ten-slot/eight-pole machine with unequal teeth is prototyped and tested to prove the analyses. [ABSTRACT FROM PUBLISHER]

This paper presents a new axial flux permanent magnet machine, named ring winding axial flux machine (AFM). The ring winding AFM (RWAFM) takes the advantage of segmented stator of yokeless and segmented armature topology with those of decoupled phases and ring winding of transverse flux topology. In this paper, the geometry of the RWAFM is introduced in detail. Furthermore, the working principle and torque production theory are discussed. To validate the concept and confirm manufacturability of the proposed topology, a prototype is fabricated. The performance of the RWAFM is studied through experimental tests, 3-D finite-element simulations, and analytical discussions. [ABSTRACT FROM PUBLISHER]

In this paper, a new shaded-pole main exciter (ME) with additional short-circuited coils for aircraft three-stage starter–generator (SG) is proposed and investigated. The basic structure, winding configurations, operating principle, and start system structure of the presented shaded-pole ME are illustrated in detail. The comparative study between the original ME and the shaded-pole ME with respect to the starting mode performances is conducted by 2-D finite-element method (FEM). A prototype SG with original ME has been developed, and the experimental results are essentially consistent with the simulation results by the FEM utilized in the predictions in this paper. Simulation data and waveforms verify that the proposed shaded-pole ME is a good candidate for aircraft machines to satisfy the dual function of starter and generator. [ABSTRACT FROM AUTHOR]

This paper aims to analyze the characteristics of a surface permanent-magnet Vernier motor (SPMVM) according to the pole ratio among the rotor magnet pole pairs, stator teeth, and winding pole number. The SPMVM has the same operational principle as a magnetic gear, and it is operated using the space harmonics of the air-gap flux density due to the magnetomotive force and air-gap permeance. In this paper, first, the design parameters of the SPMVM are specified based on an analytical calculation of the air-gap magnetic flux density. Moreover, various combinations of the rotor magnet pole pairs and stator teeth number are made and compared according to the operational principle of a Vernier motor using a 2-D finite-element method. [ABSTRACT FROM AUTHOR]

This paper describes the iron losses calculation of an axial flux machine with yokeless and segmented armature structure based on the limited three-dimensional (3-D) finite element analysis (FEA) results corresponding to one-sixth electrical period. Considering, the 3-D magnetic flux in both stator segments and rotor yoke, soft magnetic composites are used to manufacture the soft magnetic components. Furthermore, time-consuming 3-D FEA is necessary to evaluate the performance of the machine accurately. Due to the magnetic periodicity, most of the characteristics of the machine can be easily determined through averaging the limited 3-D FEA results. However, in some models the calculation of iron losses requires always the flux density waveform in each soft magnetic composites (SMC) element of the FEA model for an entire electrical period, especially when the losses resulted by minor loops should also be taken into account. Therefore, a general method to reconstruct the complete flux density waveform in each SMC component of the FEA model based on limited 3-D FEA results is suggested in this paper. Subsequently, the iron losses can be calculated with various models in time or frequency domain. Finally, the suggested method is validated by comprising the measurement of a prototype with the calculated iron losses based on the classical Bertotti formula. [ABSTRACT FROM PUBLISHER]

This paper proposes a design technique for electric ship traction machines to achieve high torque density and low torque ripple by adopting dual m-phase windings with an appropriate phase shift. Firstly, the general relationship between the slot number and the phase number for dual m-phase windings is investigated. Secondly, the uniform analytical expressions of torque with different phase shifts are derived. Also, the optimal phase shift angle is summarized from the perspective of improving torque performance. Then, the 48-slot and 22-pole permanent-magnet machines for electric ship with different windings configurations are designed. The finite-element method is used to calculate their electromagnetic performances, such as back electromotive force, torque capability, stator magnetic motive force and radial force. Finally, some experiments on the prototype machine for electric ship are carried out for validation. [ABSTRACT FROM AUTHOR]

Owing to bidirectional field modulation effect, dual-permanent-magnet-excited (DPME) machine could offer improved torque capability, which has attracted increasing attention in recent years. However, conventional DPME machine only utilizes a small amount of abundant field harmonics to yield torque, which leads to limited torque enhancement. To solve this issue, a novel DPME machine with enriched working harmonics is proposed in this paper. The key of the proposed DPME machine is to design some non-uniformly distributed permanent-magnets and flux modulation poles on the stator. Thus, increased field harmonics are produced to produce effective torque, offering the potential to enhance torque. Firstly, the topology and feature of the machine are introduced. Moreover, operating principle is analyzed by using air gap field modulation theory. Then, the operating principle and torque enhancement are verified and evaluated by using finite-element method. At last, a corresponding principle machine is fabricated, and some experiments are performed for validation. [ABSTRACT FROM AUTHOR]

Owing to a group of permanent magnets (PMs) with the same magnetization direction are replaced by salient iron core, the consequent-pole (CP) PM machines generally suffer from asymmetry flux density. This will leads to the even-order back-EMF harmonics, which have negative influence on the electromagnetic performance. It is widely known that the even-order back-EMF harmonics cannot be eliminated for the machines with odd back-EMF phasor belongs to one phase in one machine periodicity, i.e., ${\boldsymbol{N}_0}$ is odd (${\boldsymbol{N}_0} = {\boldsymbol{N}_{\boldsymbol S}}/\boldsymbol{mt}$ , where ${\boldsymbol{N}_{\boldsymbol S}}$ is the number of slot for one machine, t is the unit sub-machine periodicity, m is the number of phase). Hence, this paper proposes a general modularization method solving this problem. The elimination principle of even-order back-EMF harmonics in the modular stator (MS) is explained by the star of slots. Further, the MS with auxiliary winding (AW) and auxiliary teeth (AT) are proposed to improve the electromagnetic performance of the MS CP (MSCP) PM machine. Then, the electromagnetic characteristics, including open circuit field distribution and back-EMFs, torque characteristics, unbalanced magnetic force (UMF), loss distribution characteristics as well as efficiency contours are comprehensively compared. Finally, the MSCP PM machine with auxiliary winding (MSCP-AW) is fabricated and tested to verify the theoretical analysis as well as the finite element (FE) results. [ABSTRACT FROM AUTHOR]

Multi-turn resolvers are employed in the applications that high reliability; high accuracy and absolute position measurement are required, simultaneously. They are basically consisted of two individual resolvers in a common frame. In this paper a novel sinusoidal air-gap length multi-turn resolver is proposed. The rotor shape and the winding configuration are designed to achieve single-speed and multi-speed operations using a single rotor and a single stator core. Furthermore, some constraints are laid down and discussed in such a way that the performance of two resolvers has no interference with each other. All the mathematical calculations are validated using time stepping finite element analysis. Finally, a prototype of the sensor is built and tested. Experimental measurements are used to verify the analytical and finite element discussions. [ABSTRACT FROM AUTHOR]

This paper proposes a high temperature superconducting (HTS) double stator machine (HTS-DSM), based on the magnetic field modulation principle. In the proposed HTS-DSM, the HTS field winding and the copper armature winding are separately located on the two stators, so that it overcomes the drawbacks caused by the coupling device for cryogenic transfer, the torque tube, the carbon brushes, and slip rings in the conventional HTS synchronous machines with the rotating field winding, bringing the merits of high reliability and low maintenance cost. Moreover, a method of amounting a ferromagnetic ring outside the HTS field winding is also proposed to reduce the negative effects of the armature reaction field on the HTS field winding, since the alternating current (AC) losses induced by the armature reaction field easily cause the quench of the HTS field winding. Totally four different topologies are proposed, and the operation principle of the HTS-DSMs is analyzed based on the magnetic field modulation principle. Then the design and optimization of the HTS-DSM is discussed in detail to present the main design parameters of the four topologies. Finally, the performance of the four different topologies are compared by the finite element analysis, the results reveal that the HTS-DSM with modular dewar and iron-teeth inner stator exhibits the merits of higher power density. [ABSTRACT FROM AUTHOR]

This paper proposes a method to reduce the torque pulsation of the three-phase fractional-slot concentrated-winding (FSCW) interior permanent magnet (IPM) motor by lowering sub-harmonics. The key principle of this method is the selection of an optimized six-layer winding with different numbers of conductors. Firstly, the interaction of stator-rotor magnetomotive force (MMF) which contributes to the torque pulsation is analyzed. Additionally, the relationship between sub-harmonics (1st sub-harmonic and 2nd sub-harmonic) and torque pulsation orders is revealed. Then, different numbers of conductors are adopted in coils to eliminate the 2nd sub-harmonic. Nevertheless, the 1st sub-harmonic increases in the two-layer and four-layer windings. Therefore, the optimized six-layer winding is employed to suppress the 1st sub-harmonic and ensure that the 2nd sub-harmonic is zero. Besides, there are almost no other harmonics except the main harmonic and slot harmonics in the proposed IPM motor. Hence, the torque pulsation can be greatly reduced even under different current angles. Furthermore, the principle for torque pulsation reduction by lowering sub-harmonics is revealed. The effectiveness of the proposed method is verified through the comparisons with finite element analysis and experimental test. [ABSTRACT FROM AUTHOR]

This paper focuses on the comparative analysis of modular spoke-type permanent magnet machines with two magnetization modes, which are referred to as M-I and M-II types. The analytical models of the proposed machines are built based on the simple magneto-motive-force-permeance method. With the help of finite element analysis and the analytical models, magnetic fields in machines with different magnetization modes are compared. Then, taking as a base an existing commercial in-wheel machine used in an electric motorcycle, two proposed machines with different magnetization modes are designed as in-wheel traction machines and compared with respect to electromagnetic torque, flux-weakening performance, over-load capability, etc. The machines are prototyped and experimentally tested to verify the prediction that the M-II machines exhibit a higher torque output whereas the M-I machines have a wider speed range. [ABSTRACT FROM AUTHOR]