Nonlinear Modeling of a C-Core Connected Two-Phase Switched Reluctance Motor.

The main idea of this paper is to offer a continuous C-cores unique configuration for switched reluctance motor (SRM) and to present an analytical model for its analysis. The advantages of this structure are having a short path for the main part of the magnetic flux, resulting in less core losses and as well as less negative torque. On the other hand, there is less leakage flux in the proposed structure. Another advantage of this structure is that it has a high mean torque compared to conventional structures, so that this increase in mean torque also increases a small amount of torque ripple, which is negligible. However, power density at a constant volume increases relatively much. The proposed SRM is analyzed by the finite element method (FEM) and by employing a magnetic flux density pattern and magnetic fluxes path, its magnetic equivalent circuit (MEC) is obtained. In this MEC model, the main fluxes and leakage fluxes are fully modeled. After its complete analysis, electromagnetics torque, inductance, flux-linkage, mean torque, and peak torque are evaluated. Static and dynamic performances are then determined. Finally, the proposed SRM was prototyped and tested. The experimental results consisting of static torque, flux-linkage, voltage, and current waveforms and input power are compared with the corresponding results in the MEC model and FEM. The comparisons verify the accuracy and validity of the introduced analytical model. Besides, static torque, flux-linkage characteristics, and dynamic performance at a nominal speed of 1000 rpm and the current chopping control mode with chopping 5A under the load of the proposed SRM are compared with the conventional SRM and its merits are observed. [ABSTRACT FROM AUTHOR]