Search

Reports have suggested that tumor textures presented on T2-weighted images correlate with the genetic status of glioma. Therefore, development of an image analyzing framework that is capable of objective and high throughput image texture analysis for large scale image data collection is needed. The current study aimed to address the development of such a framework by introducing two novel parameters for image textures on T2-weighted images, i.e., Shannon entropy and Prewitt filtering. Twenty-two WHO grade 2 and 28 grade 3 glioma patients were collected whose pre-surgical MRI and IDH1 mutation status were available. Heterogeneous lesions showed statistically higher Shannon entropy than homogenous lesions (p = 0.006) and ROC curve analysis proved that Shannon entropy on T2WI was a reliable indicator for discrimination of homogenous and heterogeneous lesions (p = 0.015, AUC = 0.73). Lesions with well-defined borders exhibited statistically higher Edge mean and Edge median values using Prewitt filtering than those with vague lesion borders (p = 0.0003 and p = 0.0005 respectively). ROC curve analysis also proved that both Edge mean and median values were promising indicators for discrimination of lesions with vague and well defined borders and both Edge mean and median values performed in a comparable manner (p = 0.0002, AUC = 0.81 and p < 0.0001, AUC = 0.83, respectively). Finally, IDH1 wild type gliomas showed statistically lower Shannon entropy on T2WI than IDH1 mutated gliomas (p = 0.007) but no difference was observed between IDH1 wild type and mutated gliomas in Edge median values using Prewitt filtering. The current study introduced two image metrics that reflect lesion texture described on T2WI. These two metrics were validated by readings of a neuro-radiologist who was blinded to the results. This observation will facilitate further use of this technique in future large scale image analysis of glioma. [ABSTRACT FROM AUTHOR]

Texture analysis is an important topic in Ultrasound (US) image analysis for structure segmentation and tissue classification. In this work a novel approach for US image texture feature extraction is presented. It is mainly based on parametrical modelling of a signal version of the US image in order to process it as data resulting from a dynamical process. Because of the predictive characteristics of such a model representation, good estimations of texture features can be obtained with less data than generally used methods require, allowing higher robustness to low Signal-to-Noise ratio and a more localized US image analysis. The usability of the proposed approach was demonstrated by extracting texture features for segmenting the thyroid in US images. The obtained results showed that features corresponding to energy ratios between different modelled texture frequency bands allowed to clearly distinguish between thyroid and non-thyroid texture. A simple k-means clustering algorithm has been used for separating US image patches as belonging to thyroid or not. Segmentation of thyroid was performed in two different datasets obtaining Dice coefficients over 85%. [ABSTRACT FROM AUTHOR]

Background: Antiangiogenic therapies for glioblastoma (GBM) such as bevacizumab (BVZ), have been unable to extend survival in large patient cohorts. However, a subset of patients having angiogenesis-dependent tumors might benefit from these therapies. Currently, there are no biomarkers allowing to discriminate responders from non-responders before the start of the therapy. Methods: 40 patients from the randomized GENOM009 study complied the inclusion criteria (quality of images, clinical data available). Of those, 23 patients received first line temozolomide (TMZ) for eight weeks and then concomitant radiotherapy and TMZ. 17 patients received BVZ+TMZ for seven weeks and then added radiotherapy to the treatment. Clinical variables were collected, tumors segmented and several geometrical measures computed including: Contrast enhancing (CE), necrotic, and total volumes; equivalent spherical CE width; several geometric measures of the CE ‘rim’ geometry and a set of image texture measures. The significance of the results was studied using Kaplan-Meier and Cox proportional hazards analysis. Correlations were assessed using Spearman correlation coefficients. Results: Kaplan-Meier and Cox proportional hazards analysis showed that total, CE and inner volume (p = 0.019, HR = 4.258) and geometric heterogeneity of the CE areas (p = 0.011, HR = 3.931) were significant parameters identifying response to BVZ. The group of patients with either regular CE areas (small geometric heterogeneity, median difference survival 15.88 months, p = 0.011) or those with small necrotic volume (median survival difference 14.50 months, p = 0.047) benefited substantially from BVZ. Conclusion: Imaging biomarkers related to the irregularity of contrast enhancing areas and the necrotic volume were able to discriminate GBM patients with a substantial survival benefit from BVZ. A prospective study is needed to validate our results. [ABSTRACT FROM AUTHOR]

Background: Image texture analysis is a noninvasive technique for quantifying intratumoral heterogeneity, with derived texture features reported to be closely related to the treatment outcome of tumors. Gastric cancer is one of the most common tumors and the third leading cause of cancer-related deaths worldwide. Although trastuzumab is associated with a survival gain among patients with human epidermal growth factor receptor 2 (HER2)-positive advanced gastric cancer, optimal patient selection is challenging. The purpose of this study was to determine whether CT texture features of HER2-positive gastric cancer were related to the survival rate after trastuzumab treatment. Methods and Findings: Patients diagnosed with HER2-positive advanced gastric cancer from February 2007 to August 2014 were retrospectively selected. Using in-house built software, histogram features (kurtosis and skewness) and gray-level co-occurrence matrices (GLCM) features (angular second moment [ASM], contrast, entropy, variance, and correlation) were derived from the CT images of HER2-positive advanced gastric cancer in 26 patients. All the patients were followed up for more than 6 months, with no confirmed deaths. The patients were dichotomized into a good and poor survival group based on cutoff points of overall survival of 12 months. A receiver-operating characteristics (ROC) analysis was performed to test the ability of each texture parameter to identify the good survival group. Kaplan–Meier curves for patients above and below each threshold were constructed. Using a threshold of >265.8480 for contrast, >488.3150 for variance, and ≤0.1319×10−3. for correlation, all of the area under the ROC curves showed fair accuracy (>0.7). Kaplan–Meier analysis showed statistically significant survival difference between two groups according to optimal cutoff values of contrast, variance, correlation and ASM. However, as this study had a small number of patients, a further study with a larger population will be needed to validate the results. Conclusions: Heterogeneous texture features on CT images were associated with better survival in patients with HER2-positive advanced gastric cancer who received trastuzumab-based treatment. Therefore, texture analysis shows potential to be a clinically useful imaging biomarker providing additional prognostic information for patient selection. [ABSTRACT FROM AUTHOR]

The human heart has a heterogeneous structure, which is characterized by different cell types and their spatial configurations. The physical structure, especially the fibre orientation and the interstitial fibrosis, determines the electrical excitation and in further consequence the contractility in macroscopic as well as in microscopic areas. Modern image processing methods and parameters could be used to describe the image content and image texture. In most cases the description of the texture is not satisfying because the fibre orientation, detected with common algorithms, is biased by elements such as fibrocytes or endothelial nuclei. The goal of this work is to figure out if cardiac tissue can be analysed and classified on a microscopic level by automated image processing methods with a focus on an accurate detection of the fibre orientation. Quantitative parameters for identification of textures of different complexity or pathological attributes inside the heart were determined. The focus was set on the detection of the fibre orientation, which was calculated on the basis of the cardiomyocytes’ nuclei. It turned out that the orientation of these nuclei corresponded with a high precision to the fibre orientation in the image plane. Additionally, these nuclei also indicated very well the inclination of the fibre. [ABSTRACT FROM AUTHOR]

Forgery detection is essential to verify the integrity and authenticity of images. Existing block-based detection techniques detect forgery in the same image, most of which use similar frameworks while differ in the feature extraction schemes. These methods have high accuracy in detecting the forged regions, but the computational load is heavy when facing exhaustive search problems. This paper describes a forgery detection method based on local binary pattern residue classes and color regions. An image is divided into overlapped blocks. Local binary pattern residue classes are computed for each block. The plane formed by a dimensional and b dimensional from Lab color space is divided into 16 regions. Similar blocks are searched in the overlapped blocks with the same local binary pattern residue class and color region, then they are grouped into several suspicious regions. Finally, we analyze the multi-region relation of these suspicious regions and their areas to locate the tampered regions. The small hole is filled through the morphologic operation. The results of experiments demonstrated that our method has good performance in that it improved detection accuracy and reduced execution time under various challenging conditions. As the proposed method reduces the search range for similar blocks, it has a higher speed than exhaustive search and has comparable detection results at the same time. [ABSTRACT FROM AUTHOR]

With the exponential increase in malware, homology analysis has become a hot research topic in the malware detection field. This paper proposes MHAS, a malware homology analysis system based on ensemble learning and multifeatures. MHAS generates grayscale images from malware binary files and then uses the opcode tool IDA Pro to extract opcode sequences and system call graphs. Thus, RGB images and M-images are generated on the image matrix. Then, MHAS uses convolutional neural networks (CNNs) as base learners to perform bagging ensemble learning to learn features from the grayscale images, RGB images and M-images. Next, MHAS integrates the nine base learners using voting, learning and selective ensemble (in that order) and maps the integration results to the result matrix. Finally, the result matrix is again integrated using the learning method to obtain the final malware classification result. To verify the accuracy of MHAS, we performed a malware family classification experiment, that included samples of 10 malware families. The results showed that MHAS can reach an accuracy rate of 99.17%, meaning that it can effectively analyze and identify malware families. [ABSTRACT FROM AUTHOR]

Purpose: To develop and validate a classifier system for prediction of prostate cancer (PCa) Gleason score (GS) using radiomics and texture features of T2-weighted imaging (T2w), diffusion weighted imaging (DWI) acquired using high b values, and T2-mapping (T2). Methods: T2w, DWI (12 b values, 0–2000 s/mm2), and T2 data sets of 62 patients with histologically confirmed PCa were acquired at 3T using surface array coils. The DWI data sets were post-processed using monoexponential and kurtosis models, while T2w was standardized to a common scale. Local statistics and 8 different radiomics/texture descriptors were utilized at different configurations to extract a total of 7105 unique per-tumor features. Regularized logistic regression with implicit feature selection and leave pair out cross validation was used to discriminate tumors with 3+3 vs >3+3 GS. Results: In total, 100 PCa lesions were analysed, of those 20 and 80 had GS of 3+3 and >3+3, respectively. The best model performance was obtained by selecting the top 1% features of T2w, ADCm and K with ROC AUC of 0.88 (95% CI of 0.82–0.95). Features from T2 mapping provided little added value. The most useful texture features were based on the gray-level co-occurrence matrix, Gabor transform, and Zernike moments. Conclusion: Texture feature analysis of DWI, post-processed using monoexponential and kurtosis models, and T2w demonstrated good classification performance for GS of PCa. In multisequence setting, the optimal radiomics based texture extraction methods and parameters differed between different image types. [ABSTRACT FROM AUTHOR]

The perennial and stoloniferous weed, Cynodon dactylon (L.) Pers. (bermudagrass), is a serious problem in vineyards. The spectral similarity between bermudagrass and grapevines makes discrimination of the two species, based solely on spectral information from multi-band imaging sensor, unfeasible. However, that challenge can be overcome by use of object-based image analysis (OBIA) and ultra-high spatial resolution Unmanned Aerial Vehicle (UAV) images. This research aimed to automatically, accurately, and rapidly map bermudagrass and design maps for its management. Aerial images of two vineyards were captured using two multispectral cameras (RGB and RGNIR) attached to a UAV. First, spectral analysis was performed to select the optimum vegetation index (VI) for bermudagrass discrimination from bare soil. Then, the VI-based OBIA algorithm developed for each camera automatically mapped the grapevines, bermudagrass, and bare soil (accuracies greater than 97.7%). Finally, site-specific management maps were generated. Combining UAV imagery and a robust OBIA algorithm allowed the automatic mapping of bermudagrass. Analysis of the classified area made it possible to quantify grapevine growth and revealed expansion of bermudagrass infested areas. The generated bermudagrass maps could help farmers improve weed control through a well-programmed strategy. Therefore, the developed OBIA algorithm offers valuable geo-spatial information for designing site-specific bermudagrass management strategies leading farmers to potentially reduce herbicide use as well as optimize fuel, field operating time, and costs. [ABSTRACT FROM AUTHOR]

Haralick texture features are common texture descriptors in image analysis. To compute the Haralick features, the image gray-levels are reduced, a process called quantization. The resulting features depend heavily on the quantization step, so Haralick features are not reproducible unless the same quantization is performed. The aim of this work was to develop Haralick features that are invariant to the number of quantization gray-levels. By redefining the gray-level co-occurrence matrix (GLCM) as a discretized probability density function, it becomes asymptotically invariant to the quantization. The invariant and original features were compared using logistic regression classification to separate two classes based on the texture features. Classifiers trained on the invariant features showed higher accuracies, and had similar performance when training and test images had very different quantizations. In conclusion, using the invariant Haralick features, an image pattern will give the same texture feature values independent of image quantization. [ABSTRACT FROM AUTHOR]

Purpose: The widely known field ‘Radiomics’ aims to provide an extensive image based phenotyping of e.g. tumors using a wide variety of feature values extracted from medical images. Therefore, it is of utmost importance that feature values calculated by different institutes follow the same feature definitions. For this purpose, the imaging biomarker standardization initiative (IBSI) provides detailed mathematical feature descriptions, as well as (mathematical) test phantoms and corresponding reference feature values. We present here an easy to use radiomic feature calculator, RaCaT, which provides the calculation of a large number of radiomic features for all kind of medical images which are in compliance with the standard. Methods: The calculator is implemented in C++ and comes as a standalone executable. Therefore, it can be easily integrated in any programming language, but can also be called from the command line. No programming skills are required to use the calculator. The software architecture is highly modularized so that it is easily extendible. The user can also download the source code, adapt it if needed and build the calculator from source. The calculated feature values are compliant with the ones provided by the IBSI standard. Source code, example files for the software configuration, and documentation can be found online on GitHub (). Results: The comparison with the standard values shows that all calculated features as well as image preprocessing steps, comply with the IBSI standard. The performance is also demonstrated on clinical examples. Conclusions: The authors successfully implemented an easy to use Radiomics calculator that can be called from any programming language or from the command line. Image preprocessing and feature settings and calculations can be adjusted by the user. [ABSTRACT FROM AUTHOR]

Free amino acids are an important indicator of the freshness of yellow tea. This study investigated a novel procedure for predicting the free amino acid (FAA) concentration of yellow tea. It was developed based on the combined spectral and textural features from hyperspectral images. For the purposes of exploration and comparison, hyperspectral images of yellow tea (150 samples) were captured and analyzed. The raw spectra were preprocessed with Savitzky-Golay (SG) smoothing. To reduce the dimension of spectral data, five feature wavelengths were extracted using the successive projections algorithm (SPA). Five textural features (angular second moment, entropy, contrast, correlation, and homogeneity) were extracted as textural variables from the characteristic grayscale images of the five characteristic wavelengths using the gray-level co-occurrence matrix (GLCM). The FAA content prediction model with different variables was established by a genetic algorithm-support vector regression (GA-SVR) algorithm. The results showed that better prediction results were obtained by combining the feature wavelengths and textural variables. Compared with other data, this prediction result was still very satisfactory in the GA-SVR model, indicating that data fusion was an effective way to enhance hyperspectral imaging ability for the determination of free amino acid values in yellow tea. [ABSTRACT FROM AUTHOR]

As fetal gestational age increases, other modalities such as ultrasound have demonstrated increased levels of heterogeneity in the normal placenta. In this study, we introduce and apply ROI-based texture analysis to a retrospective fetal MRI database to characterize the second-order statistics of placenta and to evaluate the relationship between heterogeneity and gestational age. Positive correlations were observed for several Haralick texture metrics derived from fetal-brain specific T2-weighted and gravid uterus T1-weighted and T2-weighted images, confirming a quantitative increase in placental heterogeneity with gestational age. Our study shows the importance of identifying baseline MR textural changes at certain gestational ages from which placental diseased states may be compared. Specifically, when evaluating for placental invasion or insufficiency, findings should be evaluated in the context of the normal placental aging process, which occurs throughout gestation. [ABSTRACT FROM AUTHOR]

Analytical CT reconstruction is popular in practice because of its computational efficiency, but it suffers from low reconstruction quality when an insufficient number of projections are used. To address this issue, this paper presents a new analytical method of backprojection Wiener deconvolution (BPWD). BPWD executes backprojection first, and then applies a Wiener deconvolution to the whole backprojected image. The Wiener filter is derived from a ramp filter, enabling the proposed approach to perform reconstruction and denoising simultaneously. The use of a filter after backprojection does not differentiate between real sampled projections and interpolated ones, introducing reconstruction errors. Therefore a weighted ramp filter was applied to increase the contribution of real sampled projections in the reconstruction, thus improving reconstruction quality. Experiments on synthetic data and real phase-contrast x-ray images showed that the proposed approach yields better reconstruction quality compared to the classical filtered backprojection (FBP) method, with comparable reconstruction speed. [ABSTRACT FROM AUTHOR]

The stand density of trees affects stand growth and is useful for estimating other forests structure parameters. We studied tree stand density in Jiufeng National Forest Park in Beijing. The number of spectral local maxima points (NSLMP) calculated within each sample plot was extracted by the spectral maximum filtering method using QuickBird imagery. Regression analysis of NSLMP and the true stand density collected by ground measurements using differential GPS and the total station were used to estimate stand density of the study area. We used NSLMP as an independent variable and the actual stand density as the dependent variable to develop separate statistical models for all stands in the coniferous forest and broadleaf forest. By testing the different combination of Normalized Difference Vegetation Index (NDVI) thresholds and window sizes, the optimal selection was identified. The combination of a 3 × 3 window size and NDVI ≥ 0.3 threshold in coniferous forest produced the best result using near-infrared band (coniferous forest R2 = 0.79, RMSE = 12.60). The best combination for broadleaf forest was a 3 × 3 window size and NDVI ≥ 0.1 with R2 = 0.44, RMSE = 9.02 using near-infrared band. The combination of window size and NDVI threshold for all unclassified forest was 3 × 3 window size and NDVI ≥ 0.3 with R2 = 0.70, RMSE = 11.20 using near-infrared band. A stand density planning map was constructed using the best models applied for different forest types. Different forest types require the use of different combination strategies to best extract the stand density by using the local maximum (LM). The proposed method uses a combination of high spatial resolution imagery and sampling plots strategy to estimate stand density. [ABSTRACT FROM AUTHOR]

Pathology images are color in nature due to the use of chemical staining in biopsy examination. Aware of the high color diagnosticity in pathology images, this work introduces a compact rotation-invariant texture descriptor, named quantized diagnostic counter-color pattern (QDCP), for digital pathology image understanding. On the basis of color similarity quantified by the inner product of unit-length color vectors, local counter-color textons are indexed first. Then the underlined distribution of QDCP indexes is estimated by an image-wise histogram. Since QDCP is computed based on color difference directly, it is robust to small color variation usually observed in pathology images. This study also discusses QDCP’s extraction, parameter settings, and feature fusion techniques in a generic pathology image analysis pipeline, and introduces two more descriptors QDCP-LBP and QDCP/LBP. Experimentation on public pathology image sets suggests that the introduced color texture descriptors, especially QDCP-LBP, outperform prior color texture features in terms of strong descriptive power, low computational complexity, and high adaptability to different image sets. [ABSTRACT FROM AUTHOR]

Motion in a distorted virtual 3D space may cause visually induced motion sickness. Geometric distortions in stereoscopic 3D can result from mismatches among image capture, display, and viewing parameters. Three pairs of potential mismatches are considered, including 1) camera separation vs. eye separation, 2) camera field of view (FOV) vs. screen FOV, and 3) camera convergence distance (i.e., distance from the cameras to the point where the convergence axes intersect) vs. screen distance from the observer. The effect of the viewer’s head positions (i.e., head lateral offset from the screen center) is also considered. The geometric model is expressed as a function of camera convergence distance, the ratios of the three parameter-pairs, and the offset of the head position. We analyze the impacts of these five variables separately and their interactions on geometric distortions. This model facilitates insights into the various distortions and leads to methods whereby the user can minimize geometric distortions caused by some parameter-pair mismatches through adjusting of other parameter pairs. For example, in postproduction, viewers can correct for a mismatch between camera separation and eye separation by adjusting their distance from the real screen and changing the effective camera convergence distance. [ABSTRACT FROM AUTHOR]

Translation of radiomics into the clinic may require a more comprehensive understanding of the underlying morphologic tissue characteristics they reflect. In the context of prostate cancer (PCa), some studies have correlated gross histological measurements of gland lumen, epithelium, and nuclei with disease appearance on MRI. Quantitative histomorphometry (QH), like radiomics for radiologic images, is the computer based extraction of features for describing tumor morphology on digitized tissue images. In this work, we attempt to establish the histomorphometric basis for radiomic features for prostate cancer by (1) identifying the radiomic features from T2w MRI most discriminating of low vs. intermediate/high Gleason score, (2) identifying QH features correlated with the most discriminating radiomic features previously identified, and (3) evaluating the discriminative ability of QH features found to be correlated with spatially co-localized radiomic features. On a cohort of 36 patients (23 for training, 13 for validation), Gabor texture features were identified as being most predictive of Gleason grade on MRI (AUC of 0.69) and gland lumen shape features were identified as the most predictive QH features (AUC = 0.75). Our results suggest that the PCa grade discriminability of Gabor features is a consequence of variations in gland shape and morphology at the tissue level. [ABSTRACT FROM AUTHOR]

Analyzing geological drilling hole images acquired by Axial View Panoramic Borehole Televiewer (APBT) is a key step to explore the geological structure in a geological exploration. Conventionally, the borehole images are examined by technicians, which is inefficient and subjective. In this paper, three dominant types of borehole-wall images on coal-rock mass structure, namely, border images, fracture images and intact rock mass images are mainly studied. The traditional image classification methods based on unified feature extraction algorithm and single classifier is not effect for the borehole images. Therefore, this paper proposes a novel two-stage classification approach to improve the classification performance of borehole images. In the first-stage classification, the border images are identified from three kinds of images based on texture features and gray-scale histograms features. For the remaining two types of images, in the second-stage classification, Gabor filter is first applied to segment the region of interest (ROI) (such as microfracture, absciss layer and horizontal cracks, etc.) and the central interference region. Then, using the same feature vector after eliminating the central interference region, fracture images are separated from intact rock mass images. We test our two-stage classification system with real borehole images. The results of experimental show that the two-stage classification method can effectively classify three major borehole-wall images with the correction rate of 95.55% in the first stage and 95% in the second stage. [ABSTRACT FROM AUTHOR]

The integrity of image content is essential, although most watermarking algorithms can achieve image authentication but not automatically repair damaged areas or restore the original image. In this paper, a self-recovery reversible image watermarking algorithm is proposed to recover the tampered areas effectively. First of all, the original image is divided into homogeneous blocks and non-homogeneous blocks through multi-scale decomposition, and the feature information of each block is calculated as the recovery watermark. Then, the original image is divided into 4×4 non-overlapping blocks classified into smooth blocks and texture blocks according to image textures. Finally, the recovery watermark generated by homogeneous blocks and error-correcting codes is embedded into the corresponding smooth block by mapping; watermark information generated by non-homogeneous blocks and error-correcting codes is embedded into the corresponding non-embedded smooth block and the texture block via mapping. The correlation attack is detected by invariant moments when the watermarked image is attacked. To determine whether a sub-block has been tampered with, its feature is calculated and the recovery watermark is extracted from the corresponding block. If the image has been tampered with, it can be recovered. The experimental results show that the proposed algorithm can effectively recover the tampered areas with high accuracy and high quality. The algorithm is characterized by sound visual quality and excellent image restoration. [ABSTRACT FROM AUTHOR]

Although mice are commonly used to study different aspects of fatty liver disease, currently there are no validated fully automated methods to assess steatosis in mice. Accurate detection of macro- and microsteatosis in murine models of fatty liver disease is important in studying disease pathogenesis and detecting potential hepatotoxic signature during drug development. Further, precise quantification of macrosteatosis is essential for quantifying effects of therapies. Here, we develop and validate the performance of automated classifiers built using image processing and machine learning methods for detection of macro- and microsteatosis in murine fatty liver disease and study the correlation of automated quantification of macrosteatosis with expert pathologist’s semi-quantitative grades. The analysis is performed on digital images of 27 Hematoxylin & Eosin stained murine liver biopsy samples. An expert liver pathologist scored the amount of macrosteatosis and also annotated macro- and microsteatosis lesions on the biopsy images using a web-application. Using these annotations, supervised machine learning and image processing techniques, we created classifiers to detect macro- and microsteatosis. For macrosteatosis prediction, the model’s precision, sensitivity and area under the receiver operator characteristic (AUROC) were 94.2%, 95%, 99.1% respectively. When correlated with pathologist’s semi-quantitative grade of steatosis, the model fits with a coefficient of determination value of 0.905. For microsteatosis prediction, the model has precision, sensitivity and AUROC of 79.2%, 77%, 78.1% respectively. Validation by the expert pathologist of classifier’s predictions made on unseen images of biopsy samples showed 100% and 63% accuracy for macro- and microsteatosis, respectively. This novel work demonstrates that fully automated assessment of steatosis is feasible in murine liver biopsies images. Our classifier has excellent sensitivity and accuracy for detection of macrosteatosis in murine fatty liver disease. [ABSTRACT FROM AUTHOR]

Timely and spatially-regulated injectable hydrogels, able to suppress growing tumors in response to conformational transitions of proteins, are of great interest in cancer research and treatment. Herein, we report rapidly responsive silk fibroin (SF) hydrogels formed by a horseradish peroxidase (HRP) crosslinking reaction at physiological conditions, and demonstrate their use as an artificial biomimetic three-dimensional (3D) matrix. The proposed SF hydrogels presented a viscoelastic nature of injectable hydrogels and spontaneous conformational changes from random coil to β-sheet conformation under physiological conditions. A human neuronal glioblastoma (U251) cell line was used for screening cell encapsulation and in vitro evaluation within the SF hydrogels. The transparent random coil SF hydrogels promoted cell viability and proliferation up to 10 days of culturing, while the crystalline SF hydrogels converted into β-sheet structure induced the formation of TUNEL-positive apoptotic cells. Therefore, this work provides a powerful tool for the investigation of the microenvironment on the programed tumor cells death, by using rapidly responsive SF hydrogels as 3D in vitro tumor models. [ABSTRACT FROM AUTHOR]

Purpose: Radiomics, which extract large amount of quantification image features from diagnostic medical images had been widely used for prognostication, treatment response prediction and cancer detection. The treatment options for lung nodules depend on their diagnosis, benign or malignant. Conventionally, lung nodule diagnosis is based on invasive biopsy. Recently, radiomics features, a non-invasive method based on clinical images, have shown high potential in lesion classification, treatment outcome prediction. Methods: Lung nodule classification using radiomics based on Computed Tomography (CT) image data was investigated and a 4-feature signature was introduced for lung nodule classification. Retrospectively, 72 patients with 75 pulmonary nodules were collected. Radiomics feature extraction was performed on non-enhanced CT images with contours which were delineated by an experienced radiation oncologist. Result: Among the 750 image features in each case, 76 features were found to have significant differences between benign and malignant lesions. A radiomics signature was composed of the best 4 features which included Laws_LSL_min, Laws_SLL_energy, Laws_SSL_skewness and Laws_EEL_uniformity. The accuracy using the signature in benign or malignant classification was 84% with the sensitivity of 92.85% and the specificity of 72.73%. Conclusion: The classification signature based on radiomics features demonstrated very good accuracy and high potential in clinical application. [ABSTRACT FROM AUTHOR]

One method of solving the single-image super-resolution problem is to use Heaviside functions. This has been done previously by making a binary classification of image components as “smooth” and “non-smooth”, describing these with approximated Heaviside functions (AHFs), and iteration including l1 regularization. We now introduce a new method in which the binary classification of image components is extended to different degrees of smoothness and non-smoothness, these components being represented by various classes of AHFs. Taking into account the sparsity of the non-smooth components, their coefficients are l1 regularized. In addition, to pick up more image details, the new method uses an iterative refinement for the residuals between the original low-resolution input and the downsampled resulting image. Experimental results showed that the new method is superior to the original AHF method and to four other published methods. [ABSTRACT FROM AUTHOR]

The structure and appearance of the blood vessel network in retinal fundus images is an essential part of diagnosing various problems associated with the eyes, such as diabetes and hypertension. In this paper, an automatic retinal vessel segmentation method utilizing matched filter techniques coupled with an AdaBoost classifier is proposed. The fundus image is enhanced using morphological operations, the contrast is increased using contrast limited adaptive histogram equalization (CLAHE) method and the inhomogeneity is corrected using Retinex approach. Then, the blood vessels are enhanced using a combination of B-COSFIRE and Frangi matched filters. From this preprocessed image, different statistical features are computed on a pixel-wise basis and used in an AdaBoost classifier to extract the blood vessel network inside the image. Finally, the segmented images are postprocessed to remove the misclassified pixels and regions. The proposed method was validated using publicly accessible Digital Retinal Images for Vessel Extraction (DRIVE), Structured Analysis of the Retina (STARE) and Child Heart and Health Study in England (CHASE_DB1) datasets commonly used for determining the accuracy of retinal vessel segmentation methods. The accuracy of the proposed segmentation method was comparable to other state of the art methods while being very close to the manual segmentation provided by the second human observer with an average accuracy of 0.972, 0.951 and 0.948 in DRIVE, STARE and CHASE_DB1 datasets, respectively. [ABSTRACT FROM AUTHOR]

Objective: To investigate the feasibility and accuracy of texture analysis to distinguish through objective and quantitative image information between healthy and infarcted myocardium with computed tomography (CT). Materials and methods: Twenty patients (5 females; mean age 56±10years) with proven acute myocardial infarction (MI) and 20 patients (8 females; mean age 42±15years) with no cardiac abnormalities (hereafter termed controls) underwent contrast-enhanced cardiac CT. Short axis CT images of the left ventricle (LV) were reconstructed at the slice thicknesses 1mm, 2mm, and 5mm. Two independent, blinded readers segmented the LV in controls and patients. Texture analysis was performed yielding first-level features based on the histogram (variance, skewness, kurtosis, entropy), second-level features based on the gray-level co-occurrence matrix (GLCM) (contrast, correlation, energy and homogeneity), and third-level features based on the gray-level run-length matrix (GLRLM). Results: Inter-and intrareader agreement was good to excellent for all histogram (intraclass correlation coefficient (ICC):0.70–0.93) and for all GLCM features (ICC:0.66–0.99), and was variable for the GLRLM features (ICC:-0.12–0.99). Univariate analysis showed significant differences between patients and controls for 2/4 histogram features, 3/4 GLCM and for 6/11 GLRLM features and all assessed slice thicknesses (all,p<0.05). In a multivariate logistic regression model, the single best variable from each level, determined by ROC analysis, was included stepwise. The best model included kurtosis (OR 0.08, 95%CI:0.01–0.65,P = 0.018) and short run high gray-level emphasis (SRHGE, OR 0.97, 95%CI:0.94–0.99,P = 0.007), with an area-under-the-curve (AUC) of 0.90 (95%CI:0.80–0.99). The best results for kurtosis and SRHGE (AUC = 0.78) were obtained at a 5mm slice thickness. A cut-off value of 14.4 for kurtosis+0.013*SRHGE predicted acute MI with a sensitivity of 95% (specificity 55%). Conclusion: Our study illustrates the feasibility of texture analysis for distinguishing healthy from acutely infarcted myocardium with cardiac CT using objective, quantitative features, with most reproducible and accurate results at a short axis slice thickness of 5mm. [ABSTRACT FROM AUTHOR]

In this paper we address the problem of automated grading of invasive breast carcinoma through the encoding of histological images as VLAD (Vector of Locally Aggregated Descriptors) representations on the Grassmann manifold. The proposed method considers each image as a set of multidimensional spatially-evolving signals that can be efficiently modeled through a higher-order linear dynamical systems analysis. Subsequently, each H&E (Hematoxylin and Eosin) stained breast cancer histological image is represented as a cloud of points on the Grassmann manifold, while a vector representation approach is applied aiming to aggregate the Grassmannian points based on a locality criterion on the manifold. To evaluate the efficiency of the proposed methodology, two datasets with different characteristics were used. More specifically, we created a new medium-sized dataset consisting of 300 annotated images (collected from 21 patients) of grades 1, 2 and 3, while we also provide experimental results using a large dataset, namely BreaKHis, containing 7,909 breast cancer histological images, collected from 82 patients, of both benign and malignant cases. Experimental results have shown that the proposed method outperforms a number of state of the art approaches providing average classification rates of 95.8% and 91.38% with our dataset and the BreaKHis dataset, respectively. [ABSTRACT FROM AUTHOR]

Objective: To evaluate the use of ultrasound coupled with machine learning (ML) and deep learning (DL) techniques for automated or semi-automated classification of myositis. Methods: Eighty subjects comprised of 19 with inclusion body myositis (IBM), 14 with polymyositis (PM), 14 with dermatomyositis (DM), and 33 normal (N) subjects were included in this study, where 3214 muscle ultrasound images of 7 muscles (observed bilaterally) were acquired. We considered three problems of classification including (A) normal vs. affected (DM, PM, IBM); (B) normal vs. IBM patients; and (C) IBM vs. other types of myositis (DM or PM). We studied the use of an automated DL method using deep convolutional neural networks (DL-DCNNs) for diagnostic classification and compared it with a semi-automated conventional ML method based on random forests (ML-RF) and “engineered” features. We used the known clinical diagnosis as the gold standard for evaluating performance of muscle classification. Results: The performance of the DL-DCNN method resulted in accuracies ± standard deviation of 76.2% ± 3.1% for problem (A), 86.6% ± 2.4% for (B) and 74.8% ± 3.9% for (C), while the ML-RF method led to accuracies of 72.3% ± 3.3% for problem (A), 84.3% ± 2.3% for (B) and 68.9% ± 2.5% for (C). Conclusions: This study demonstrates the application of machine learning methods for automatically or semi-automatically classifying inflammatory muscle disease using muscle ultrasound. Compared to the conventional random forest machine learning method used here, which has the drawback of requiring manual delineation of muscle/fat boundaries, DCNN-based classification by and large improved the accuracies in all classification problems while providing a fully automated approach to classification. [ABSTRACT FROM AUTHOR]

This paper presents a survey on a system that uses digital image processing techniques to identify anthracnose and powdery mildew diseases of sandalwood from digital images. Our main objective is researching the most suitable identification technology for the anthracnose and powdery mildew diseases of the sandalwood leaf, which provides algorithmic support for the real-time machine judgment of the health status and disease level of sandalwood. We conducted real-time monitoring of Hainan sandalwood leaves with varying severity levels of anthracnose and powdery mildew beginning in March 2014. We used image segmentation, feature extraction and digital image classification and recognition technology to carry out a comparative experimental study for the image analysis of powdery mildew, anthracnose disease and healthy leaves in the field. Performing the actual test for a large number of diseased leaves pointed to three conclusions: (1) Distinguishing effects of BP (Back Propagation) neural network method, in all kinds of classical methods, for sandalwood leaf anthracnose and powdery mildew disease are relatively good; the size of the lesion areas were closest to the actual. (2) The differences between two diseases can be shown well by the shape feature, color feature and texture feature of the disease image. (3) Identifying and diagnosing the diseased leaves have ideal results by SVM, which is based on radial basis kernel function. The identification rate of the anthracnose and healthy leaves was 92% respectively, and that of powdery mildew was 84%. Disease identification technology lays the foundation for remote monitoring disease diagnosis, preparing for remote transmission of the disease images, which is a very good guide and reference for further research of the disease identification and diagnosis system in sandalwood and other species of trees. [ABSTRACT FROM AUTHOR]

The objective of this study was to examine the tumor spatial heterogeneity in myxoid-containing soft-tissue tumors (STTs) using texture analysis of diffusion-weighted imaging (DWI). A total of 40 patients with myxoid-containing STTs (23 benign and 17 malignant) were included in this study. The region of interest (ROI) was manually drawn on the apparent diffusion coefficient (ADC) map. For texture analysis, the global (mean, standard deviation, skewness, and kurtosis), regional (intensity variability and size-zone variability), and local features (energy, entropy, correlation, contrast, homogeneity, variance, and maximum probability) were extracted from the ADC map. Student’s t-test was used to test the difference between group means. Analysis of covariance (ANCOVA) was performed with adjustments for age, sex, and tumor volume. The receiver operating characteristic (ROC) analysis was performed to compare diagnostic performances. Malignant myxoid-containing STTs had significantly higher kurtosis (P = 0.040), energy (P = 0.034), correlation (P<0.001), and homogeneity (P = 0.003), but significantly lower contrast (P<0.001) and variance (P = 0.001) compared with benign myxoid-containing STTs. Contrast showed the highest area under the curve (AUC = 0.923, P<0.001), sensitivity (94.12%), and specificity (86.96%). Our results reveal the potential utility of texture analysis of ADC maps for differentiating benign and malignant myxoid-containing STTs. [ABSTRACT FROM AUTHOR]

This paper provides evidence on the usefulness of very high spatial resolution (VHR) imagery in gathering socioeconomic information in urban settlements. We use land cover, spectral, structure and texture features extracted from a Google Earth image of Liverpool (UK) to evaluate their potential to predict Living Environment Deprivation at a small statistical area level. We also contribute to the methodological literature on the estimation of socioeconomic indices with remote-sensing data by introducing elements from modern machine learning. In addition to classical approaches such as Ordinary Least Squares (OLS) regression and a spatial lag model, we explore the potential of the Gradient Boost Regressor and Random Forests to improve predictive performance and accuracy. In addition to novel predicting methods, we also introduce tools for model interpretation and evaluation such as feature importance and partial dependence plots, or cross-validation. Our results show that Random Forest proved to be the best model with an R2 of around 0.54, followed by Gradient Boost Regressor with 0.5. Both the spatial lag model and the OLS fall behind with significantly lower performances of 0.43 and 0.3, respectively. [ABSTRACT FROM AUTHOR]

A clinical tool that can diagnose psychiatric illness using functional or structural magnetic resonance (MR) brain images has the potential to greatly assist physicians and improve treatment efficacy. Working toward the goal of automated diagnosis, we propose an approach for automated classification of ADHD and autism based on histogram of oriented gradients (HOG) features extracted from MR brain images, as well as personal characteristic data features. We describe a learning algorithm that can produce effective classifiers for ADHD and autism when run on two large public datasets. The algorithm is able to distinguish ADHD from control with hold-out accuracy of 69.6% (over baseline 55.0%) using personal characteristics and structural brain scan features when trained on the ADHD-200 dataset (769 participants in training set, 171 in test set). It is able to distinguish autism from control with hold-out accuracy of 65.0% (over baseline 51.6%) using functional images with personal characteristic data when trained on the Autism Brain Imaging Data Exchange (ABIDE) dataset (889 participants in training set, 222 in test set). These results outperform all previously presented methods on both datasets. To our knowledge, this is the first demonstration of a single automated learning process that can produce classifiers for distinguishing patients vs. controls from brain imaging data with above-chance accuracy on large datasets for two different psychiatric illnesses (ADHD and autism). Working toward clinical applications requires robustness against real-world conditions, including the substantial variability that often exists among data collected at different institutions. It is therefore important that our algorithm was successful with the large ADHD-200 and ABIDE datasets, which include data from hundreds of participants collected at multiple institutions. While the resulting classifiers are not yet clinically relevant, this work shows that there is a signal in the (f)MRI data that a learning algorithm is able to find. We anticipate this will lead to yet more accurate classifiers, over these and other psychiatric disorders, working toward the goal of a clinical tool for high accuracy differential diagnosis. [ABSTRACT FROM AUTHOR]

High-efficiency video compression technology is of primary importance to the storage and transmission of digital medical video in modern medical communication systems. To further improve the compression performance of medical ultrasound video, two innovative technologies based on diagnostic region-of-interest (ROI) extraction using the high efficiency video coding (H.265/HEVC) standard are presented in this paper. First, an effective ROI extraction algorithm based on image textural features is proposed to strengthen the applicability of ROI detection results in the H.265/HEVC quad-tree coding structure. Second, a hierarchical coding method based on transform coefficient adjustment and a quantization parameter (QP) selection process is designed to implement the otherness encoding for ROIs and non-ROIs. Experimental results demonstrate that the proposed optimization strategy significantly improves the coding performance by achieving a BD-BR reduction of 13.52% and a BD-PSNR gain of 1.16 dB on average compared to H.265/HEVC (HM15.0). The proposed medical video coding algorithm is expected to satisfy low bit-rate compression requirements for modern medical communication systems. [ABSTRACT FROM AUTHOR]

Textural analysis might give new insights into the quantitative characterization of metabolically active tumors. More than thirty textural parameters have been investigated in former F18-FDG studies already. The purpose of the paper is to declare basic requirements as a selection strategy to identify the most appropriate heterogeneity parameters to measure textural features. Our predefined requirements were: a reliable heterogeneity parameter has to be volume independent, reproducible, and suitable for expressing quantitatively the degree of heterogeneity. Based on this criteria, we compared various suggested measures of homogeneity. A homogeneous cylindrical phantom was measured on three different PET/CT scanners using the commonly used protocol. In addition, a custom-made inhomogeneous tumor insert placed into the NEMA image quality phantom was imaged with a set of acquisition times and several different reconstruction protocols. PET data of 65 patients with proven lung lesions were retrospectively analyzed as well. Four heterogeneity parameters out of 27 were found as the most attractive ones to characterize the textural properties of metabolically active tumors in FDG PET images. These four parameters included Entropy, Contrast, Correlation, and Coefficient of Variation. These parameters were independent of delineated tumor volume (bigger than 25–30 ml), provided reproducible values (relative standard deviation< 10%), and showed high sensitivity to changes in heterogeneity. Phantom measurements are a viable way to test the reliability of heterogeneity parameters that would be of interest to nuclear imaging clinicians. [ABSTRACT FROM AUTHOR]

Objective: The present work proposes a new clinical approach to TTFields therapy of glioblastoma. The approach combines targeted surgical skull removal (craniectomy) with TTFields therapy to enhance the induced electrical field in the underlying tumor tissue. Using computer simulations, we explore the potential of the intervention to improve the clinical efficacy of TTFields therapy of brain cancer. Methods: We used finite element analysis to calculate the electrical field distribution in realistic head models based on MRI data from two patients: One with left cortical/subcortical glioblastoma and one with deeply seated right thalamic anaplastic astrocytoma. Field strength was assessed in the tumor regions before and after virtual removal of bone areas of varying shape and size (10 to 100 mm) immediately above the tumor. Field strength was evaluated before and after tumor resection to assess realistic clinical scenarios. Results: For the superficial tumor, removal of a standard craniotomy bone flap increased the electrical field strength by 60–70% in the tumor. The percentage of tissue in expected growth arrest or regression was increased from negligible values to 30–50%. The observed effects were highly focal and targeted at the regions of pathology underlying the craniectomy. No significant changes were observed in surrounding healthy tissues. Median field strengths in tumor tissue increased with increasing craniectomy diameter up to 50–70 mm. Multiple smaller burr holes were more efficient than single craniectomies of equivalent area. Craniectomy caused no significant field enhancement in the deeply seated tumor, but rather a focal enhancement in the brain tissue underlying the skull defect. Conclusions: Our results provide theoretical evidence that small and clinically feasible craniectomies may provide significant enhancement of TTFields intensity in cerebral hemispheric tumors without severely compromising brain protection or causing unacceptable heating in healthy tissues. A clinical trial is being planned to validate safety and efficacy. [ABSTRACT FROM AUTHOR]

Objective: Evaluation of a new iterative reconstruction algorithm (IMR) for detection/rule-out of pulmonary embolism (PE) in ultra-low dose computed tomography pulmonary angiography (CTPA). Methods: Lower dose CT data sets were simulated based on CTPA examinations of 16 patients with pulmonary embolism (PE) with dose levels (DL) of 50%, 25%, 12.5%, 6.3% or 3.1% of the original tube current setting. Original CT data sets and simulated low-dose data sets were reconstructed with three reconstruction algorithms: the standard reconstruction algorithm “filtered back projection” (FBP), the first generation iterative reconstruction algorithm iDose and the next generation iterative reconstruction algorithm “Iterative Model Reconstruction” (IMR). In total, 288 CTPA data sets (16 patients, 6 tube current levels, 3 different algorithms) were evaluated by two blinded radiologists regarding image quality, diagnostic confidence, detectability of PE and contrast-to-noise ratio (CNR). Results: iDose and IMR showed better detectability of PE than FBP. With IMR, sensitivity for detection of PE was 100% down to a dose level of 12.5%. iDose and IMR showed superiority to FBP regarding all characteristics of subjective (diagnostic confidence in detection of PE, image quality, image noise, artefacts) and objective image quality. The minimum DL providing acceptable diagnostic performance was 12.5% (= 0.45 mSv) for IMR, 25% (= 0.89 mSv) for iDose and 100% (= 3.57 mSv) for FBP. CNR was significantly (p < 0.001) improved by IMR compared to FBP and iDose at all dose levels. Conclusion: By using IMR for detection of PE, dose reduction for CTPA of up to 75% is possible while maintaining full diagnostic confidence. This would result in a mean effective dose of approximately 0.9 mSv for CTPA. [ABSTRACT FROM AUTHOR]

We explore a novel approach for human detection based on random color similarity feature (RCS) and random ferns classifier which is also known as semi-naive Bayesian classifier. In contrast to other existing features employed by human detection, color-based features are rarely used in vision-based human detection because of large intra-class variations. In this paper, we propose a novel color-based feature, RCS feature, which is yielded by simple color similarity computation between image cells randomly picked in still images, and can effectively characterize human appearances. In addition, a histogram of oriented gradient based local binary feature (HOG-LBF) is also introduced to enrich the human descriptor set. Furthermore, random ferns classifier is used in the proposed approach because of its faster speed in training and testing than traditional classifiers such as Support Vector Machine (SVM) classifier, without a loss in performance. Finally, the proposed method is conducted in public datasets and achieves competitive detection results. [ABSTRACT FROM AUTHOR]

Purpose: To assess image quality of CT pulmonary angiography (CTPA) at reduced radiation exposure (RD-CTPA) and contrast medium (CM) volume using two different iterative reconstruction (IR) algorithms (iDose4 and iterative model reconstruction (IMR)) in comparison to filtered back projection (FBP). Materials and Methods: 52 patients (body weight < 100 kg, mean BMI: 23.9) with suspected pulmonary embolism (PE) underwent RD-CTPA (tube voltage: 80 kV; mean CTDIvol: 1.9 mGy) using 40 ml CM. Data were reconstructed using FBP and two different IR algorithms (iDose4 and IMR). Subjective and objective image quality and conspicuity of PE were assessed in central, segmental, and subsegmental arteries. Results: Noise reduction of 55% was achieved with iDose4 and of 85% with IMR compared to FBP. Contrast-to-noise ratio significantly increased with iDose4 and IMR compared to FBP (p<0.05). Subjective image quality was rated significantly higher at IMR reconstructions in comparison to iDose4 and FBP. Conspicuity of central and segmental PE significantly improved with the use of IMR. In subsegmental arteries, iDose4 was superior to IMR. Conclusions: CTPA at reduced radiation exposure and contrast medium volume is feasible with the use of IMR, which provides improved image quality and conspicuity of pulmonary embolism in central and segmental arteries. [ABSTRACT FROM AUTHOR]

Objectives: To address the question as to whether echocardiographic and/or microcomputed tomography (microCT) analysis can be utilized to assess the extent of Coxsackie B virus (CVB) induced myocarditis in the absence of left ventricular dysfunction in the mouse. Background: Viral myocarditis is a significant clinical problem with associated inflammation of the myocardium and myocardial injury. Murine models of myocarditis are commonly used to study the pathophysiology of the disease, but methods for imaging the mouse myocardium have been limited to echocardiographic assessment of ventricular dysfunction and, to a lesser extent, MRI imaging. Methods: Using a murine model of myocarditis, we used both echocardiography and microCT to assess the extent of myocardial involvement in murine myocarditis using both wild-type mice and CVB cleavage-resistant dystrophin knock-in mice. Results: Areas of increased echogenicity were only observed in the myocardium of Coxsackie B virus infected mice. These echocardiographic abnormalities correlated with the extent of von Kossa staining (a marker of membrane permeability), inflammation, and fibrosis. Given that calcium phosphate uptake as imaged by von Kossa staining might also be visualized using microCT, we utilized microCT imaging which allowed for high-resolution, 3-dimensional images of radiodensities that likely represent calcium phosphate uptake. As with echocardiography, only mice infected with Coxsackie B virus displayed abnormal accumulation of calcium within individual myocytes indicating increased membrane permeability only upon exposure to virus. Conclusions: These studies demonstrate new, quantitative, and semi-quantitative imaging approaches for the assessment of myocardial involvement in the setting of viral myocarditis in the commonly utilized mouse model of viral myocarditis. [ABSTRACT FROM AUTHOR]

The aim of this work is to predict the complexity perception of real world images. We propose a new complexity measure where different image features, based on spatial, frequency and color properties are linearly combined. In order to find the optimal set of weighting coefficients we have applied a Particle Swarm Optimization. The optimal linear combination is the one that best fits the subjective data obtained in an experiment where observers evaluate the complexity of real world scenes on a web-based interface. To test the proposed complexity measure we have performed a second experiment on a different database of real world scenes, where the linear combination previously obtained is correlated with the new subjective data. Our complexity measure outperforms not only each single visual feature but also two visual clutter measures frequently used in the literature to predict image complexity. To analyze the usefulness of our proposal, we have also considered two different sets of stimuli composed of real texture images. Tuning the parameters of our measure for this kind of stimuli, we have obtained a linear combination that still outperforms the single measures. In conclusion our measure, properly tuned, can predict complexity perception of different kind of images. [ABSTRACT FROM AUTHOR]

Field peas (Pisum sativum L.) are generally traded based on seed appearance, which subjectively defines broad market-grades. In this study, we developed an objective Linear Discriminant Analysis (LDA) model to classify market grades of field peas based on seed colour, shape and size traits extracted from digital images. Seeds were imaged in a high-throughput system consisting of a camera and laser positioned over a conveyor belt. Six colour intensity digital images were captured (under 405, 470, 530, 590, 660 and 850nm light) for each seed, and surface height was measured at each pixel by laser. Colour, shape and size traits were compiled across all seed in each sample to determine the median trait values. Defective and non-defective seed samples were used to calibrate and validate the model. Colour components were sufficient to correctly classify all non-defective seed samples into correct market grades. Defective samples required a combination of colour, shape and size traits to achieve 87% and 77% accuracy in market grade classification of calibration and validation sample-sets respectively. Following these results, we used the same colour, shape and size traits to develop an LDA model which correctly classified over 97% of all validation samples as defective or non-defective. [ABSTRACT FROM AUTHOR]

Computer vision as a fast, low-cost, noncontact, and online monitoring technology has been an important tool to inspect product quality, particularly on a large-scale assembly production line. However, the current industrial vision system is far from satisfactory in the intelligent perception of complex grain images, comprising a large number of local homogeneous fragmentations or patches without distinct foreground and background. We attempt to solve this problem based on the statistical modeling of spatial structures of grain images. We present a physical explanation in advance to indicate that the spatial structures of the complex grain images are subject to a representative Weibull distribution according to the theory of sequential fragmentation, which is well known in the continued comminution of ore grinding. To delineate the spatial structure of the grain image, we present a method of multiscale and omnidirectional Gaussian derivative filtering. Then, a product quality classifier based on sparse multikernel–least squares support vector machine is proposed to solve the low-confidence classification problem of imbalanced data distribution. The proposed method is applied on the assembly line of a food-processing enterprise to classify (or identify) automatically the production quality of rice. The experiments on the real application case, compared with the commonly used methods, illustrate the validity of our method. [ABSTRACT FROM AUTHOR]

Low-dose protocols for respiratory gating in cardiothoracic small-animal imaging lead to streak artifacts in the images reconstructed with a Feldkamp-Davis-Kress (FDK) method. We propose a novel prior- and motion-based reconstruction (PRIMOR) method, which improves prior-based reconstruction (PBR) by adding a penalty function that includes a model of motion. The prior image is generated as the average of all the respiratory gates, reconstructed with FDK. Motion between respiratory gates is estimated using a nonrigid registration method based on hierarchical B-splines. We compare PRIMOR with an equivalent PBR method without motion estimation using as reference the reconstruction of high dose data. From these data acquired with a micro-CT scanner, different scenarios were simulated by changing photon flux and number of projections. Methods were evaluated in terms of contrast-to-noise-ratio (CNR), mean square error (MSE), streak artefact indicator (SAI), solution error norm (SEN), and correction of respiratory motion. Also, to evaluate the effect of each method on lung studies quantification, we have computed the Jaccard similarity index of the mask obtained from segmenting each image as compared to those obtained from the high dose reconstruction. Both iterative methods greatly improved FDK reconstruction in all cases. PBR was prone to streak artifacts and presented blurring effects in bone and lung tissues when using both a low number of projections and low dose. Adopting PBR as a reference, PRIMOR increased CNR up to 33% and decreased MSE, SAI and SEN up to 20%, 4% and 13%, respectively. PRIMOR also presented better compensation for respiratory motion and higher Jaccard similarity index. In conclusion, the new method proposed for low-dose respiratory gating in small-animal scanners shows an improvement in image quality and allows a reduction of dose or a reduction of the number of projections between two and three times with respect to previous PBR approaches. [ABSTRACT FROM AUTHOR]

Purpose: We compared attenuation correction of PET images with helical CT (PET/HCT) and respiration-averaged CT (PET/ACT) in patients with non-small-cell lung cancer (NSCLC) with the goal of investigating the impact of respiration-averaged CT on 18F FDG PET texture parameters. Materials and Methods: A total of 56 patients were enrolled. Tumors were segmented on pretreatment PET images using the adaptive threshold. Twelve different texture parameters were computed: standard uptake value (SUV) entropy, uniformity, entropy, dissimilarity, homogeneity, coarseness, busyness, contrast, complexity, grey-level nonuniformity, zone-size nonuniformity, and high grey-level large zone emphasis. Comparisons of PET/HCT and PET/ACT were performed using Wilcoxon signed-rank tests, intraclass correlation coefficients, and Bland-Altman analysis. Receiver operating characteristic (ROC) curves as well as univariate and multivariate Cox regression analyses were used to identify the parameters significantly associated with disease-specific survival (DSS). A fixed threshold at 45% of the maximum SUV (T45) was used for validation. Results: SUV maximum and total lesion glycolysis (TLG) were significantly higher in PET/ACT. However, texture parameters obtained with PET/ACT and PET/HCT showed a high degree of agreement. The lowest levels of variation between the two modalities were observed for SUV entropy (9.7%) and entropy (9.8%). SUV entropy, entropy, and coarseness from both PET/ACT and PET/HCT were significantly associated with DSS. Validation analyses using T45 confirmed the usefulness of SUV entropy and entropy in both PET/HCT and PET/ACT for the prediction of DSS, but only coarseness from PET/ACT achieved the statistical significance threshold. Conclusions: Our results indicate that 1) texture parameters from PET/ACT are clinically useful in the prediction of survival in NSCLC patients and 2) SUV entropy and entropy are robust to attenuation correction methods. [ABSTRACT FROM AUTHOR]

Purpose: This paper proposes to characterize the continuum of colorectal cancer (CRC) using multiple texture features extracted from multispectral optical microscopy images. Three types of pathological tissues (PT) are considered: benign hyperplasia, intraepithelial neoplasia and carcinoma. Materials and Methods: In the proposed approach, the region of interest containing PT is first extracted from multispectral images using active contour segmentation. This region is then encoded using texture features based on the Laplacian-of-Gaussian (LoG) filter, discrete wavelets (DW) and gray level co-occurrence matrices (GLCM). To assess the significance of textural differences between PT types, a statistical analysis based on the Kruskal-Wallis test is performed. The usefulness of texture features is then evaluated quantitatively in terms of their ability to predict PT types using various classifier models. Results: Preliminary results show significant texture differences between PT types, for all texture features (p-value < 0.01). Individually, GLCM texture features outperform LoG and DW features in terms of PT type prediction. However, a higher performance can be achieved by combining all texture features, resulting in a mean classification accuracy of 98.92%, sensitivity of 98.12%, and specificity of 99.67%. Conclusions: These results demonstrate the efficiency and effectiveness of combining multiple texture features for characterizing the continuum of CRC and discriminating between pathological tissues in multispectral images. [ABSTRACT FROM AUTHOR]

Exposure to fine particles can cause various diseases, and an easily accessible method to monitor the particles can help raise public awareness and reduce harmful exposures. Here we report a method to estimate PM air pollution based on analysis of a large number of outdoor images available for Beijing, Shanghai (China) and Phoenix (US). Six image features were extracted from the images, which were used, together with other relevant data, such as the position of the sun, date, time, geographic information and weather conditions, to predict PM2.5 index. The results demonstrate that the image analysis method provides good prediction of PM2.5 indexes, and different features have different significance levels in the prediction. [ABSTRACT FROM AUTHOR]

Disturbances of the cardiac conduction system constitute a major risk after surgical repair of complex cases of congenital heart disease. Intraoperative identification of the conduction system may reduce the incidence of these disturbances. We previously developed an approach to identify cardiac tissue types using fiber-optics confocal microscopy and extracellular fluorophores. Here, we applied this approach to investigate sensitivity and specificity of human and automated classification in discriminating images of atrial working myocardium and specialized tissue of the conduction system. Two-dimensional image sequences from atrial working myocardium and nodal tissue of isolated perfused rodent hearts were acquired using a fiber-optics confocal microscope (Leica FCM1000). We compared two methods for local application of extracellular fluorophores: topical via pipette and with a dye carrier. Eight blinded examiners evaluated 162 randomly selected images of atrial working myocardium (n = 81) and nodal tissue (n = 81). In addition, we evaluated the images using automated classification. Blinded examiners achieved a sensitivity and specificity of 99.2±0.3% and 98.0±0.7%, respectively, with the dye carrier method of dye application. Sensitivity and specificity was similar for dye application via a pipette (99.2±0.3% and 94.0±2.4%, respectively). Sensitivity and specificity for automated methods of tissue discrimination were similarly high. Human and automated classification achieved high sensitivity and specificity in discriminating atrial working myocardium and nodal tissue. We suggest that our findings facilitate clinical translation of fiber-optics confocal microscopy as an intraoperative imaging modality to reduce the incidence of conduction disturbances during surgical correction of congenital heart disease. [ABSTRACT FROM AUTHOR]

The modeling of the spatial distribution of image properties is important for many pattern recognition problems in science and engineering. Mathematical methods are needed to quantify the variability of this spatial distribution based on which a decision of classification can be made in an optimal sense. However, image properties are often subject to uncertainty due to both incomplete and imprecise information. This paper presents an integrated approach for estimating the spatial uncertainty of vagueness in images using the theory of geostatistics and the calculus of probability measures of fuzzy events. Such a model for the quantification of spatial uncertainty is utilized as a new image feature extraction method, based on which classifiers can be trained to perform the task of pattern recognition. Applications of the proposed algorithm to the classification of various types of image data suggest the usefulness of the proposed uncertainty modeling technique for texture feature extraction. [ABSTRACT FROM AUTHOR]