Search

As the essential content of intelligent animal husbandry, identifying each livestock is the only way to achieve modern and refined scientific husbandry. This paper proposes a sheep face recognition method based on European spatial metrics and realizes noncontact sheep identity recognition by training the network using sheep face image samples in the natural environment. The SheepBase data set was first proposed in this process, which contains 6559 images of Inner Mongolia fine-wool sheep and Sunite sheep. To enhance the diversity of the data, the sheep face images were data-enhanced. Secondly, to solve the problems of more redundant information in the sheep face image and the poor posture and angle of the sheep face, we propose the sheep face detection and correction (SheepFaceRepair) method. This method aims to detect the sheep face area in the image to be recognized and align the sheep face area. On this basis, we offer an open sheep facial recognition network (SheepFaceNet) based on the European spatial metric. This method incorporates the biological identity information features of the sheep face to achieve sheep identity. We also tested the effectiveness of this method in the SheepBase data set. The experimental results show that the method proposed in this paper is much higher than the other methods, and the precision of recognition reaches 89.12%. In addition, we found that integrating the biometrics of the sheep face can effectively improve the network’s recognition capacity.

The development of information technology has led to the rapid development of modern book packaging design. Book packaging design is different from painting. It is a kind of design process that combines artistry and practicality and has double characteristics. With the continuous progress of society, people’s requirements for book packaging design have become higher and higher, and modern book packaging design has become an important topic in the field of art design. To this end, this paper introduces the machine learning algorithms used in this paper, including the AdaBoost algorithm and the SVR algorithm. Specifically, it includes the principles and specific implementation steps for AdaBoost classification algorithm and SVR regression algorithm, as well as evaluation indexes of AdaBoost classification and SVR regression analysis. Realization of physical books reflects artistry, creativity, professionalism, popularity, and vitality of books in the packaging and design of books in the electronic information era. The stimulation effect of this paper starts from packaging design, inspection mechanism, and brand psychology to get the superior design in modern book packaging design.

This paper mainly studies the influence of dynamic cognitive diagnosis on personalized learning. Considering the influence of knowledge correlation factors and human brain memory factors on learning activities, a knowledge tracing model integrating learning factors is proposed. Firstly, based on the exercise-knowledge association information, the model maps learners and exercises to the knowledge space with clear meaning. Then, the evolution process of learners’ knowledge learning is quantitatively modeled in the knowledge space by integrating the classical learning curve and forgetting curve theory of pedagogy. On the other hand, considering the influence of topic semantics in the learning process, a knowledge tracing model integrating topic semantics is proposed in this paper. Firstly, the model designs a dynamic enhanced memory network to store the common information of knowledge and describes the learners’ dynamic mastery of knowledge. Secondly, the depth representation method of exercise resources is proposed to mine the text personality information and integrate it into the process of learners’ knowledge change modeling. Through a large number of experiments on exercise records, it is verified that the proposed model has accurate prediction performance and knowledge tracing interpretability.

In the process of tobacco silk making, how to better improve the quality of stem and leaf separation has become an issue of concern. His research mainly discusses the data collected from tobacco leaf images based on computer vision sensors. In LM (Levenberg-Marquarelt) as a training function, the algorithm uses threshing effect samples for training and learning. This paper is aimed at extracting the shape characteristic parameters of tobacco leaves and obtains the shape parameters of the length, width, area, circumference, and roundness of the tobacco leaves. In this paper, boundary tracking is used to obtain the coordinate and direction information of the tobacco leaf boundary pixels in the image, which provides a basis for obtaining the subsequent extraction of tobacco leaf characteristic parameters. In the tobacco leaf grading system, the tobacco leaf feature parameter extraction module displays the geometric characteristics of tobacco leaf, such as length, width, area, aspect ratio, rectangularity, and color characteristic, hue H , saturation S , A channel, and B channel in detail through the computer vision sensor. Finally, the subjective and objective combination weighting method is used to combine and weight the indicators of the threshing effect of the first-level threshing machine, which not only considers the quantity of information provided by the indicators but also takes into account the subjective view of the experts, which increases the weight of the indicators, accuracy, and scientificity. The approximation accuracy of the training samples of the threshing effect prediction model based on the BP neural network LM algorithm is 99.495%, the approximation accuracy of the validation set is 96.535%, and the approximation accuracy of the test set is 98.392%. This research will greatly improve production efficiency and meet the enterprise’s requirements for high efficiency and low cost.

China is gradually transitioning from the “tunnel construction era” to the “tunnel maintenance era,” and more and more operating tunnels need to be inspected for diseases. With the continuous development of computer vision, the automatic identification of tunnel lining cracks with computers has gradually been applied in engineering. On the basis of summarizing the weaknesses and strengths of previous studies, this paper first uses the improved multiscale Retinex algorithm to filter the collected tunnel crack images and introduces the eight-direction Sobel edge detection operator to extract the edges of the cracks. Perform mathematical morphological operations on the image after edge extraction, and use the principle of the smallest enclosing rectangle to remove the isolated points of the image. Finally, the performance of the algorithm is judged by the objective evaluation index of the image, the accuracy of crack recognition, and the running time of the algorithm. The image filtering algorithm proposed in this paper can better preserve the edges of the image while enhancing the image. The objective evaluation indexes of the image have been improved significantly, and the main body of the crack can be accurately identified. The overall crack recognition accuracy rate can reach 97.5%, which is higher than the existing tunnel lining crack recognition algorithm, and the average calculation time for each image is shorter. This algorithm has high research significance and engineering application value.

Sea ice disasters are already one of the most serious marine disasters in the Bohai Sea region of our country, which have seriously affected the coastal economic development and residents’ lives. Sea ice classification is an important part of sea ice detection. Hyperspectral imagery and multispectral imagery contain rich spectral information and spatial information and provide important data support for sea ice classification. At present, most sea ice classification methods mainly focus on shallow learning based on spectral features, and the good performance of the deep learning method in remote sensing image classification provides a new idea for sea ice classification. However, the level of deep learning is limited due to the influence of input size in sea ice image classification, and the deep features in the image cannot be fully mined, which affects the further improvement of sea ice classification accuracy. Therefore, this paper proposes an image classification method based on multilevel feature fusion using residual network. First, the PCA method is used to extract the first principal component of the original image, and the residual network is used to deepen the number of network layers. The FPN, PAN, and SPP modules increase the mining between layer and layer features and merge the features between different layers to further improve the accuracy of sea ice classification. In order to verify the effectiveness of the method in this paper, sea ice classification experiments were performed on the hyperspectral image of Bohai Bay in 2008 and the multispectral image of Bohai Bay in 2020. The experimental results show that compared with the algorithm with fewer layers of deep learning network, the method proposed in this paper utilizes the idea of residual network to deepen the number of network layers and carries out multilevel feature fusion through FPN, PAN, and SPP modules, which effectively solves the problem of insufficient deep feature extraction and obtains better classification performance.

Statistical analysis of Bactrocera grooming behavior is important for pest control and human health. Based on DeepLabCut, this study proposes a noninvasive and effective method to track the key points of Bactrocera minax and to detect and analyze its grooming behavior. The results are analyzed and calculated automatically by a computer program. Traditional movement tracking methods are invasive; for instance, the use of artificial pheromone may affect the behavior of Bactrocera minax, thus directly affecting the accuracy and reliability of experimental results. Traditional research studies mainly rely on manual work for behavior analysis and statistics. Researchers need to play the video frame by frame and record the time interval of each grooming behavior manually, which is time-consuming, laborious, and inaccurate. So the advantages of automated analysis are obvious. Using the method proposed in this paper, the image data of 94538 frames from 5 adult Bactrocera were analyzed and 14 key points were tracked. The overall tracking accuracy was as high as 96.7%. In the behavior analysis and statistics, the average accuracy rate of the five grooming behavior was all above 96%, and the accuracy rate of the remaining two grooming behavior was over 87%. The experimental results show that the automatic noninvasive method designed in this paper can track many key points of Bactrocera minax with high accuracy and ensure the accuracy of insect behavior recognition and analysis, which greatly reduces the manual observation time and provides a new method for key points tracking and behavior recognition of related insects.

Convolution neural network has become a hot research topic in the field of computer vision because of its superior performance in image classification. Based on the above background, the purpose of this paper is to analyze sports sequence images based on convolutional neural network. In view of the low detection rate of single-frame and the complexity of multiframe detection algorithms, this paper proposes a new algorithm combining single-frame detection and multiframe detection, so as to improve the detection rate of small targets and reduce the detection time. Based on the traditional residual network, an improved, multiscale, residual network is proposed in this paper. The network structure enables the convolution layer to “observe” data from different scales and obtain more abundant input features. Moreover, the depth of the network is reduced, the gradient vanishing problem is effectively suppressed, and the training difficulty is reduced. Finally, the ensemble learning method of relative majority voting is used to reduce the classification error rate of the network to 3.99% on CIFAR-10, and the error rate is reduced by 3% compared with the original residual neural network.

With the concept of sustainable development, enterprises are facing severe challenges in ecological protection and economic development. Approaches to improving effectiveness of the coordinated development strategy must continue to evolve to address uncertainty and hazards that may be encountered in the future. We propose a coordinated development strategy model based on the combination of soft fuzzy and rough set theory and construct its prediction model. For the multistrategy dataset in the paper, parameter for each kind shall be selected through converting the multistrategy data into two prediction datasets. An algorithm transformed by SFRC shall be subject to weighted average for each parameter. Furthermore, we use training methods and soft fuzzy rough sets’ learning algorithm to calculate, and the evaluating indicator rough set is constructed with a three-tier model structure. After the final rough set training is completed, test results show that the rough set model which has a higher rating accuracy builds a better completed business performance evaluation. By comparing the prediction effect, both SVM algorithm and multistrategy prediction model for the soft fuzzy rough set in the paper can realize effective prediction for the enterprise’s coordinated development strategy. Moreover, the prediction result obtained at the time of adopting boundary to get the expected value is superior to that of giving one fixed threshold. It shows that the prediction performance of the algorithm in the paper is more excellent and represents the advantage of the algorithm prediction performance at the time of adopting boundary to get the expected value. The model provides support methods to assist enterprise management in making more efficient and scientific decisions for enterprise’s coordinated development.

WOS:000672427400001 In today's complex and ever-changing world, concerns about the lack of enough data have been replaced by concerns about too much data for supply chain management (SCM). The volume of data generated from all parts of the supply chain has changed the nature of SCM analysis. By increasing the volume of data, the efficiency and effectiveness of the traditional methods have decreased. Limitations of these methods in analyzing and interpreting a large amount of data have led scholars to generate some methods that have high capability to analyze and interpret big data. Therefore, the main purpose of this paper is to identify the applications of machine learning (ML) in SCM as one of the most well-known artificial intelligence (AI) techniques. By developing a conceptual framework, this paper identifies the contributions of ML techniques in selecting and segmenting suppliers, predicting supply chain risks, and estimating demand and sales, production, inventory management, transportation and distribution, sustainable development (SD), and circular economy (CE). Finally, the implications of the study on the main limitations and challenges are discussed, and then managerial insights and future research directions are given. WOS:000672427400001 Q3

Microscope vision analysis is applied in many fields. The traditional way is to use the human eye to observe and manually focus to obtain the image of the observed object. However, with the observation object becoming more and more subtle, the magnification of the microscope is required to be larger and larger. The method of manual focusing cannot guarantee the best focusing position of the microscope in use. Therefore, in this paper, we are studying the existing autofocusing technology and the autofocusing method of microscope based on image processing, which is different from the traditional manual focusing method. The autofocusing method of microscope based on image processing does not need the information such as the target position and the focal length of optical system, to directly focus the collected image. First of all, in order to solve the problem of large computation and difficult real time of traditional wavelet based image sharpness evaluation algorithm, this paper proposes an improved wavelet based image sharpness evaluation algorithm; secondly, in view of the situation that the window selected by traditional focusing window selection method is fixed, this paper adopts an adaptive focusing window selection method to increase the focusing window. Finally, this paper studies the extremum search strategy. In order to avoid the interference of the local extremum in the focusing curve, this paper proposes an improved hill-climbing algorithm to achieve the accuracy of focusing search. The simulation results show that the improved wavelet transform image definition evaluation algorithm can improve the definition evaluation performance, and the improved mountain climbing algorithm can reduce the impact of local extremum and improve the accuracy of the search algorithm. All in all, it can be concluded that the method based on image processing proposed in this paper has a good focusing effect, which can meet the needs of anti-interference and extreme value search of microscope autofocus.

Sports video is loved by the audience because of its unique charm, so it has high research value and application value to analyze and study the video data of competition. Based on the background of football match, this paper studies the football detection and tracking algorithm in football game video and analyzes the real-time image of real-time mobile devices in sports video augmented reality. Firstly, the image is preprocessed by image graying, image denoising, image binarization, and so on. Secondly, Hough transform is used to locate and detect football, and according to the characteristics of football, Hough transform is improved. Based on the good performance of SIFT algorithm in feature matching, a football tracking algorithm based on SIFT feature matching is proposed, which matches the detected football with the sample football. The simulation results show that the improved Hough transform can effectively detect football and has good antijamming performance. And the designed football tracking algorithm based on SIFT feature matching can accurately track the football trajectory; therefore, the football detection and tracking algorithm designed in this paper is suitable for real-time football monitoring and tracking.

Recent years have witnessed the use of metaheuristic algorithms to solve the optimization problems that usually require extensive computations and time. Among others, scatter search is the widely used evolutionary metaheuristic algorithm. It uses the information of global optima, which is stored in a different and unique set of solutions. In this paper, an updated review of scatter search (SS) is given. SS has been successfully applied in a variety of research problems, namely, data mining, bioinformatics, and engineering design. This paper presents the modified and hybrid versions of SS with their applications. The control strategies are discussed to show their impact on the performance of SS. various issues and future directions related to SS are also discussed. It inspires innovative researchers to use this algorithm for their research domains.

Language and vision are the two most essential parts of human intelligence for interpreting the real world around us. How to make connections between language and vision is the key point in current research. Multimodality methods like visual semantic embedding have been widely studied recently, which unify images and corresponding texts into the same feature space. Inspired by the recent development of text data augmentation and a simple but powerful technique proposed called EDA (easy data augmentation), we can expand the information with given data using EDA to improve the performance of models. In this paper, we take advantage of the text data augmentation technique and word embedding initialization for multimodality retrieval. We utilize EDA for text data augmentation, word embedding initialization for text encoder based on recurrent neural networks, and minimizing the gap between the two spaces by triplet ranking loss with hard negative mining. On two Flickr-based datasets, we achieve the same recall with only 60% of the training dataset as the normal training with full available data. Experiment results show the improvement of our proposed model; and, on all datasets in this paper (Flickr8k, Flickr30k, and MS-COCO), our model performs better on image annotation and image retrieval tasks; the experiments also demonstrate that text data augmentation is more suitable for smaller datasets, while word embedding initialization is suitable for larger ones.

Promoting economic development and improving people’s quality of life have a lot to do with the continuous improvement of cloud computing technology and the rapid expansion of applications. Emotions play an important role in all aspects of human life. It is difficult to avoid the influence of inner emotions in people’s behavior and deduction. This article mainly studies the personalized emotion recognition and emotion prediction system based on cloud computing. This paper proposes a method of intelligently identifying users’ emotional states through the use of cloud computing. First, an emotional induction experiment is designed to induce the testers’ positive, neutral, and negative three basic emotional states and collect cloud data and EEG under different emotional states. Then, the cloud data is processed and analyzed to extract emotional features. After that, this paper constructs a facial emotion prediction system based on cloud computing data model, which consists of face detection and facial emotion recognition. The system uses the SVM algorithm for face detection, uses the temporal feature algorithm for facial emotion analysis, and finally uses the classification method of machine learning to classify emotions, so as to realize the purpose of identifying the user’s emotional state through cloud computing technology. Experimental data shows that the EEG signal emotion recognition method based on time domain features performs best has better generalization ability and is improved by 6.3% on the basis of traditional methods. The experimental results show that the personalized emotion recognition method based on cloud computing is more effective than traditional methods.

To solve the problem of real-time arrhythmia classification, this paper proposes a real-time arrhythmia classification algorithm using deep learning with low latency, high practicality, and high reliability, which can be easily applied to a real-time arrhythmia classification system. In the algorithm, a classifier detects the QRS complex position in real time for heartbeat segmentation. Then, the ECG_RRR feature is constructed according to the heartbeat segmentation result. Finally, another classifier classifies the arrhythmia in real time using the ECG_RRR feature. This article uses the MIT-BIH arrhythmia database and divides the 44 qualified records into two groups (DS1 and DS2) for training and evaluation, respectively. The result shows that the recall rate, precision rate, and overall accuracy of the algorithm’s interpatient QRS complex position prediction are 98.0%, 99.5%, and 97.6%, respectively. The overall accuracy for 5-class and 13-class interpatient arrhythmia classification is 91.5% and 75.6%, respectively. Furthermore, the real-time arrhythmia classification algorithm proposed in this paper has the advantages of practicability and low latency. It is easy to deploy the algorithm since the input is the original ECG signal with no feature processing required. And, the latency of the arrhythmia classification is only the duration of one heartbeat cycle.

Deep learning is a computer-based modeling approach, which is made up of many processing layers that are used to understand the representation of data with several levels of abstraction. This review paper presents the state of the art in deep learning to highlight the major challenges and contributions in computer vision. This work mainly gives an overview of the current understanding of deep learning and their approaches in solving traditional artificial intelligence problems. These computational models enhanced its application in object detection, visual object recognition, speech recognition, face recognition, vision for driverless cars, virtual assistants, and many other fields such as genomics and drug discovery. Finally, this paper also showcases the current developments and challenges in training deep neural network.

The rapid development of artificial intelligence technology makes it widely used in various fields. In order to more scientifically assist teenagers in physical training, this paper develops a set of teenagers’ physical training system based on artificial intelligence technology. Firstly, the experimental platform is built, and the sensor nodes are connected with the test host through the serial port to collect data to the experimental platform. The system consists of target detection module, data analysis module, and human posture estimation module. The background modeling method based on vibe model is used to form the target detection module, and the canny edge detection algorithm is used to form the data analysis module. Finally, the posture auxiliary index is established to estimate the human posture. This paper makes a systematic application test on a youth sports team. The experimental group was trained with artificial intelligence-based physical training system, while the control group was trained with traditional training methods. Before the experiment, the physical fitness of the two groups of subjects were evaluated, including standing long jump, 50 meters sprint, 30 s single swing rope skipping, pull-up, and squat 1RM. After 3 and 6 weeks of training, the physical fitness was evaluated again. The experimental results show that the intelligent assistant system established in this paper can accurately show that the physiological load of the athlete is in line with the law of physiological function change. After six weeks of training, the standing long jump of the experimental group has been improved by 20.97 cm, the 50 meters dash has been accelerated by 1.21 s, the 30 second single swing rope has been increased by 13.76, the pull-up has been increased by 1.41, and the squat 1RM has been increased by 15.16. This shows that the auxiliary training system based on artificial intelligence can help young athletes improve their physical quality and enhance their sports skills.

The Internet is a popular form of information technology development in the new century, and it organizes and analyzes big data by taking effective measures to find useful information. With manpower, it is obviously not enough to be in such a huge information system, so the emergence of sustainable computing and artificial intelligence has become the core of large-scale data processing at this stage. This paper studies the application of the combined algorithm based on sustainable computing and artificial intelligence. In this paper, a new combined intelligent search algorithm is proposed by combining sustainable computing with artificial intelligence. The combination algorithm firstly analyzes the value from the aspects of ecological environment and economic benefits and studies the overall evaluation of sustainable development ability. Secondly, the energy analysis method is used to establish a reasonable comprehensive ecosystem and evaluate its impact on the sustainable development of environment and economy. Finally, the impact of resource consumption, wind speed detection, waste discharge, and utilization of renewable resources in a certain area is analyzed by simulation. Through the experimental results, on the one hand, it is proved that the data obtained by the combined algorithm are more accurate than the single algorithm; on the other hand, the combined algorithm can be further sublimated and widely used for other data detection. The combination algorithm proposed in this paper can effectively detect the required data and has high applicability.

As an essential data processing technology, cluster analysis has been widely used in various fields. In clustering, it is necessary to select appropriate measures to evaluate the similarity in the data. In this paper, firstly, a cluster center selection method based on the grey relational degree is proposed to solve the problem of sensitivity in initial cluster center selection. Secondly, combining the advantages of Euclidean distance, DTW distance, and SPDTW distance, a weighted distance measurement based on three kinds of reach is proposed. Then, it is applied to Fuzzy C-MeDOIDS and Fuzzy C-means hybrid clustering technology. Numerical experiments are carried out with the UCI datasets. The experimental results show that the accuracy of the clustering results is significantly improved by using the clustering method proposed in this paper. Besides, the method proposed in this paper is applied to the MUSIC INTO EMOTIONS and YEAST datasets. The clustering results show that the algorithm proposed in this paper can also achieve a better clustering effect when dealing with practical problems.

With the rapid development of mechatronics and robotics technology, the application of robots has been extended from the industrial field to daily life and has become an indispensable part of work and daily life. The accuracy and flexibility of the operator determine the operating efficiency of the robot. Although the level of development of the operator is constantly improving, the traditional operator has a simple structure and generally adopts parallel movement or tightening. The holding structure has poor flexibility and stability, making it difficult to achieve precise position capture and control and cannot meet the requirements of delicate tasks. In this paper, a basic force analysis of the manipulator is carried out, and the change trend of the force and driving force of each joint when the manipulator is grasping objects is obtained, so as to determine that the manipulator can grasp the object stably; then, in the strength analysis of the manipulator, it is determined that the material meets the strength requirements. This paper conducts an output voltage experiment on the static performance and coupling error of the mechanical arm wrist force sensor. Secondly, in order to study the influence of the temperature change in the space environment on the zero-point output of the mechanical arm sensor, a high and low temperature test box are used to simulate the temperature brought by the temperature change to the sensor. Experiments show that the maximum coupling error of the sensor is 1.81%, which is less than 2% of the design index. This indicates that the operator sensor is used to detect the force and torque that the space operator’s edge operator experiences when it interacts with the external environment and provides the necessary power sensing information for power control and compatible operator motion control, completing some complex; the Fine project is an important prerequisite for realizing the intelligence of space operators.

With the rapid development of network technology and entertainment creation, the types of movies have become more and more diverse, which makes users wonder how to choose the type of movies. In order to improve the selection efficiency, recommend Algorithm came into being. Deep learning is a research field that has received extensive attention from scholars in recent years. Due to the characteristics of its deep architecture, deep learning models can learn more complex structures. Therefore, deep learning algorithms in speech recognition, machine translation, image recognition, and other fields have achieved impressive results. This article mainly introduces the research of personalized movie recommendation methods based on deep learning and intends to provide ideas and directions for the research of personalized movie recommendation under deep learning. This paper proposes a research method of personalized movie recommendation methods based on deep learning, including an overview of personalized recommendation and collaborative filtering recommendation algorithms, which are used to conduct research experiments on personalized movie recommendation methods based on deep learning. The experimental results in this paper show that the accuracy of the training set of the Seq2Seq model based on the LSTM recurrent neural network reaches 96.27% and the accuracy of the test set reaches 95.89%, which can be better for personalized movie recommendation.

Considering that the garbage classification is urgent, a 23-layer convolutional neural network (CNN) model is designed in this paper, with the emphasis on the real-time garbage classification, to solve the low accuracy of garbage classification and recycling and difficulty in manual recycling. Firstly, the depthwise separable convolution was used to reduce the Params of the model. Then, the attention mechanism was used to improve the accuracy of the garbage classification model. Finally, the model fine-tuning method was used to further improve the performance of the garbage classification model. Besides, we compared the model with classic image classification models including AlexNet, VGG16, and ResNet18 and lightweight classification models including MobileNetV2 and SuffleNetV2 and found that the model GAF_dense has a higher accuracy rate, fewer Params, and FLOPs. To further check the performance of the model, we tested the CIFAR-10 data set and found the accuracy rates of the model (GAF_dense) are 0.018 and 0.03 higher than ResNet18 and SufflenetV2, respectively. In the ImageNet data set, the accuracy rates of the model (GAF_dense) are 0.225 and 0.146 higher than Resnet18 and SufflenetV2, respectively. Therefore, the garbage classification model proposed in this paper is suitable for garbage classification and other classification tasks to protect the ecological environment, which can be applied to classification tasks such as environmental science, children’s education, and environmental protection.

Target detection and segmentation algorithms have long been one of the main research directions in the field of computer vision, especially in the study of sea surface image understanding, these two tasks often need to consider the collaborative work at the same time, which is very high for the computing processor performance requirements. This article aims to study the deep learning sea target detection and segmentation algorithm. This paper uses wavelet transform-based filtering method for speckle noise suppression, deep learning-based method for land masking, and the target detection part uses an improved CFAR cascade algorithm. Finally, the best separable features are selected to eliminate false alarms. In order to further illustrate the feasibility of the scheme, this paper uses measured data and simulation data to verify the scheme and discusses the effect of different signal-to-noise ratio, sea target type, and attitude on the algorithm performance. The research data show that the deep learning sea target detection and segmentation algorithm has good detection performance and is generally applicable to ship target detection of different types and different attitudes. The results show that the deep learning sea target detection and segmentation algorithm fully takes into account the irregular shape and texture of the interfering target detected in the optical remote sensing image so that the accuracy rate is 32.7% higher and the efficiency is increased by about 1.3 times. The deep learning sea target detection is compared with segmentation algorithm, and it has strong target characterization ability and can be applied to ship targets of different scales.

Network intrusion detection system can effectively detect network attack behaviour, which is very important to network security. In this paper, a multiclassification network intrusion detection model based on convolutional neural network is proposed, and the algorithm is optimized. First, the data is preprocessed, the original one-dimensional network intrusion data is converted into two-dimensional data, and then the effective features are learned using optimized convolutional neural networks, and, finally, the final test results are produced in conjunction with the Softmax classifier. In this paper, KDD-CUP 99 and NSL-KDD standard network intrusion detection dataset were used to carry out the multiclassification network intrusion detection experiment; the experimental results show that the multiclassification network intrusion detection model proposed in this paper improves the accuracy and check rate, reduces the false positive rate, and also obtains better test results for the detection of unknown attacks.

Exoskeleton robot is a typical application to assist the motion of lower limbs. To make the lower extremity exoskeleton more flexible, it is necessary to identify various motion intentions of the lower limbs of the human body. Although more sEMG sensors can be used to identify more lower limb motion intention, with the increase in the number of sensors, more and more data need to be processed. In the process of human motion, the collected sEMG signal is easy to be interfered with noise. To improve the practicality of the lower extremity exoskeleton robot, this paper proposed a wavelet packet transform- (WPT-) based sliding window difference average filtering feature extract algorithm and the unscented Kalman neural network (UKFNN) recognition algorithm. We established an sEMG energy feature model, using a sliding window difference average filtering method to suppress noise interference and extracted stable feature values and using UKF filtering to optimize the neural network weights to improve the adaptability and accuracy of the recognition model. In this paper, we collected the sEMG signals of three muscles to identify six lower limb motion intentions. The average accuracy of 94.83% is proposed in this paper. Experiments show that the algorithm improves the accuracy and anti-interference of motion intention recognition of lower limb sEMG signals. The algorithm is superior to the backpropagation neural network (BPNN) recognition algorithm in the lower limb motion intention recognition and proves the effectiveness, novelty, and reliability of the method in this paper.

The lens for monitoring the rubber conveyor belt is easy to adhere to a large number of water droplets, which seriously affects the image quality and then affects the effect of fault monitoring. In this paper, a new method for detecting and removing water droplets on rubber conveyor belts based on the attentive generative adversarial network is proposed to solve this problem. First, the water droplet image of the rubber conveyor belt is input into the generative network composed of a cyclic visual attentive network and an autoencoder with skip connections, and an image of removing water droplets and an attention map for detecting the position of the water droplet are generated. Then, the generated image of removing water droplets is evaluated by the attentive discriminant network to assess the local consistency of the water droplet recovery area. In order to better learn the water droplet regions and the surrounding structures during the training, the image morphology is added to the precise water droplet regions. A dewatered rubber conveyor belt image is generated by increasing the number of circular visual attention network layers and the number of skip connection layers of the autoencoder. Finally, a large number of comparative experiments prove the effectiveness of the water droplet image removal algorithm proposed in this paper, which outperforms of Convolutional Neural Network (CNN), Discriminative Sparse Coding (DSC), Layer Prior (LP), and Attention Generative Adversarial Network (ATTGAN).

Categorizing national football teams by level is challenging because there is no standard of reference. Therefore, the self-organizing feature mapping network is used to solve this problem. In this paper, appropriate sample data were collected and an appropriate self-organizing feature mapping network model was built. After training, we obtained the classification results of 4 grades of 16 major Asian football national teams. As for the classification results, it is different to normalize the input data and not to normalize the input data. The classification results accord with our subjective cognition, which indicates the rationality of self-organizing feature mapping network in solving the classification problem of national football teams. In addition, the paper makes a detailed analysis of the classification results of the Chinese team and compares the gap between the Chinese team and the top Asian teams. It also analyses the impact of the normalization of input data on the classification results, taking Saudi Arabia as an example.

In order to improve the accuracy of sports combination training action recognition, a sports combination training action recognition model based on SMO algorithm optimization model and artificial intelligence is proposed. In this paper, by expanding the standard action data, the standard database of score comparison is established, and the system architecture and the key acquisition module design based on 3D data are given. In this paper, the background subtraction method is used to process the sports video image to obtain the sports action contour and realize the sports action segmentation and feature extraction, and the artificial intelligence neural network is used to train the feature vector to establish the sports action recognition classifier. This paper mainly uses a three-stream CNN artificial intelligence deep learning framework based on convolutional neural network and uses a soft Vlad representation algorithm based on data decoding to learn the action features. Through the data enhancement of the existing action database, it uses support vector machine to achieve high-precision action classification. The test results show that the model improves the recognition rate of sports action and reduces the error recognition rate, which can meet the online recognition requirements of sports action.

To realize real-time detection of the operating environment of bridge cranes, this paper presents a three-dimensional mapping method using a binocular camera and laser ranging sensor. First, the left and right images are obtained by using the binocular camera, and the block matching is used for stereo correspondence to obtain the disparity image. Then, according to the reprojection matrix and the disparity image, the depth value of each pixel is obtained, and the depth image can be transformed into a three-dimensional point cloud of the current frame. Relying on the camera position data obtained by the laser ranging sensor, the three-dimensional point cloud generated from different positions is registered to obtain the three-dimensional point cloud of the craneʼs global operating environment. Finally, an octree map is used to represent the operating environment. To simulate the construction process of the operating environment of the bridge crane, an experimental platform was built, and experiments were carried out using the method proposed in this paper. The experimental results verified the feasibility of the method proposed in this paper.

The powerful advanced manufacturing industry is the most powerful driving force for economic development and growth, and it is also the main source of environmental pollution. Artificial intelligence and blockchain technology are recognized as a breakthrough technology that can be widely used, changing the way the entire society and economy operate. The main constraints affecting the sustainable development of the manufacturing industry are ecological deterioration and resource shortage, but the development of artificial intelligence and blockchain technology provides new ideas for solving manufacturing problems. Based on this, this paper proposes a research on the sustainable development performance of green manufacturing technology innovation based on artificial intelligence and blockchain technology. This paper deeply grasps the essence and connotation of artificial intelligence and blockchain technology, analyzes its specific application form and research background, searches for the effective effect of manufacturing technology innovation and green manufacturing performance path, and clarifies the mechanism between the two. All measurement items in the questionnaire used in this article use Likert5 scale and use 1–5 options to indicate the degree of conformity with the actual situation of the enterprise. The results show that the average green manufacturing capacity of each measurement item is between 3.18∼3.97, indicating that the company's green manufacturing capacity is relatively high. Among them, the ability of green technology innovation is relatively high, indicating that most companies have noticed that the improvement of the ability of green technology innovation plays a vital role in the future sustainable development of enterprises. Moreover, more and more companies are paying attention to the latest applications of blockchain technology, which can effectively promote the development of enterprises.

Accompaniment production is one of the most important elements in music work, and chord arrangement is the key link of accompaniment production, which usually requires more musical talent and profound music theory knowledge to be competent. In this article, the machine learning model is used to replace manual accompaniment chords’ arrangement, and an automatic computer means is provided to complete and assist accompaniment chords’ arrangement. Also, through music feature extraction, automatic chord label construction, and model construction and training, the whole system finally has the ability of automatic accompaniment chord arrangement for the main melody. Based on the research of automatic chord label construction method and the characteristics of MIDI data format, a chord analysis method based on interval difference is proposed to construct chord labels of the whole track and realize the construction of automatic chord labels. In this study, the hidden Markov model is constructed according to the chord types, in which the input features are the improved theme PCP features proposed in this paper, and the input labels are the label data set constructed by the automated method proposed in this paper. After the training is completed, the PCP features of the theme to be predicted and improved are input to generate the accompaniment chords of the final arrangement. Through PCP features and template-matching model, the system designed in this paper improves the matching accuracy of the generated chords compared with that generated by the traditional method.

Accuracy and efficiency are essential topics in the current biometric feature recognition and security research. This paper proposes a deep neural network using bidirectional feature extraction and transfer learning to improve finger-vein recognition performance. Above all, we make a new finger-vein database with the opposite position information of the original one and adopt transfer learning to make the network suitable for our overall recognition framework. Next, the feature extractor is constructed by adjusting the unidirectional database’s parameters, capturing vein features from top to bottom and vice versa. Correspondingly, we concatenate the above two features to form the finger-veins’ bidirectional features, which are trained and classified by Support Vector Machines (SVM) to realize recognition. Experiments are conducted on the Malaysian Polytechnic University’s published database (FV-USM) and finger veins of Signal and Information Processing Laboratory (FV-SIPL). The accuracy of our proposed algorithm reaches 99.67% and 99.31%, which is significantly higher than the unidirectional recognition under each database. Compared with the algorithms cited in this paper, our proposed model based on bidirectional feature enjoys higher accuracy, faster recognition speed than the state-of-the-art frameworks, and excellent practical value.

Automatic and accurate segmentation of brain tumors plays an important role in the diagnosis and treatment of brain tumors. In order to improve the accuracy of brain tumor segmentation, an improved multimodal MRI brain tumor segmentation algorithm based on U-net is proposed in this paper. In the original U-net, the contracting path uses the pooling layer to reduce the resolution of the feature image and increase the receptive field. In the expanding path, the up sampling is used to restore the size of the feature image. In this process, some details of the image will be lost, leading to low segmentation accuracy. This paper proposes an improved convolutional neural network named AIU-net (Atrous-Inception U-net). In the encoder of U-net, A-inception (Atrous-inception) module is introduced to replace the original convolution block. The A-inception module is an inception structure with atrous convolution, which increases the depth and width of the network and can expand the receptive field without adding additional parameters. In order to capture the multiscale features, the atrous spatial pyramid pooling module (ASPP) is introduced. The experimental results on the BraTS (the multimodal brain tumor segmentation challenge) dataset show that the dice score obtained by this method is 0.93 for the enhancing tumor region, 0.86 for the whole tumor region, and 0.92 for the tumor core region, and the segmentation accuracy is improved.

This paper presents an in-depth study and analysis of the 3D arterial centerline in spiral CT coronary angiography, and constructs its detection and extraction technique. The first time, the distance transform is used to complete the boundary search of the original figure; the second time, the distance transform is used to calculate the value of the distance transform of all voxels, and according to the value of the distance transform, unnecessary voxels are deleted, to complete the initial contraction of the vascular region and reduce the computational consumption in the next process; then, the nonwitnessed voxels are used to construct the maximum inner joint sphere model and find the skeletal voxels that can reflect the shape of the original figure. Finally, the skeletal lines were optimized on these initially extracted skeletal voxels using a dichotomous-like principle to obtain the final coronary artery centerline. Through the evaluation of the experimental results, the algorithm can extract the coronary centerline more accurately. In this paper, the segmentation method is evaluated on the test set data by two kinds of indexes: one is the index of segmentation result evaluation, including dice coefficient, accuracy, specificity, and sensitivity; the other is the index of clinical diagnosis result evaluation, which is to refine the segmentation result for vessel diameter detection. The results obtained in this paper were compared with the physicians’ labeling results. In terms of network performance, the Dice coefficient obtained in this paper was 0.89, the accuracy was 98.36%, the sensitivity was 93.36%, and the specificity was 98.76%, which reflected certain advantages in comparison with the advanced methods proposed by previous authors. In terms of clinical evaluation indexes, by performing skeleton line extraction and diameter calculation on the results obtained by the segmentation method proposed in this paper, the absolute error obtained after comparing with the diameter of the labeled image was 0.382 and the relative error was 0.112, which indicates that the segmentation method in this paper can recover the vessel contour more accurately. Then, the results of coronary artery centerline extraction with and without fine branch elimination were evaluated, which proved that the coronary artery centerline has higher accuracy after fine branch elimination. The algorithm is also used to extract the centerline of the complete coronary artery tree, and the results prove that the algorithm has better results for the centerline extraction of the complete coronary vascular tree.

HRMS is a very critical tool for companies. The recruitment text contains rich information that can provide strong information support for the company’s recruitment work and also improve the efficiency of job seekers in finding job opportunities. To this end, for the problem of multilabel text classification of recruitment information, this paper provides two algorithms for multilayer classification based on supported SVM. First, the same learning subclass method is used for text sorting subclass acquisition, and then, the class of the text is determined. Second, the hemispherical support SVM is used to find the smallest hypersphere in the feature space that contains the most text of that class and segment the text of that class from other texts. For the text to be classified, the distance from it to the center of each hypersphere is used to determine the class of the text. Experimental results on recruitment data demonstrate that the algorithm in this paper has a high check-all rate, check-accuracy rate, and F1. And, the relationship between HRM activities and corporate performance is discussed.

Physical monitoring and analysis are of great significance to improve national physical fitness. The main work of this paper is that the physical health level of college students is studied and analysed by using a statistical model and mathematical model. According to the characteristics of the collected data, different mathematical models are established. Firstly, the grey correlation model is used to analyse the correlation between pull-up and other physical fitness indexes. Then, based on the classification of college students and the influence and flow law of interclass crowd, a differential equation system is established based on the LMC model. By analysing the existence and stability of the equilibrium point of the system, as well as the possible folding bifurcation and backward bifurcation at the equilibrium point, this paper makes qualitative and quantitative research on the trend of college students’ physical exercise on campus.

To improve the interpretability or perception of information in images for human viewers is the main goal of image enhancement. Aiming at the problem that image edges are difficult to determine due to artefacts, plaques, and vascular branches in cardiovascular ultrasound, an edge ultrasound imaging detection algorithm based on spatial-frequency-domain image enhancement is proposed to improve the clarity of ultrasound images. Firstly, this paper uses the space-frequency-domain enhancement algorithm to enhance the image. This algorithm overcomes the problem of low contrast of conventional algorithms. The enhanced data matrix is used as the cost matrix, and then, the heuristic image search method is used to search the image of the cost matrix. The results show that the use of spatial-frequency-domain image ultrasound imaging algorithm can improve the contrast and sharpness of ultrasound images of cardiovascular disease, which can make the middle edge of the image clearer, the detection accuracy rate is increased to 92.76%, and the ultrasound of cardiovascular disease is improved. The edge of the image gets accuracy. The paper confirms that the ultrasound imaging algorithm based on spatial-frequency-domain image enhancement is worthy of application in clinical ultrasound image processing. The performance of the proposed technique is 32.54%, 75.30%, 21.19%, 21.26%, and 11.10% better than the existing technique in terms of edge energy, detail energy, sharpness, contrast, and information entropy, respectively.

Nonfrontal facial expression recognition in the wild is the key for artificial intelligence and human-computer interaction. However, it is easy to be disturbed when changing head pose. Therefore, this paper presents a face rebuilding method to solve this problem based on PRNet, which can build 3D frontal face for 2D head photo with any pose. However, expression is still difficult to be recognized, because facial features weakened after frontalization, which had been widely reported by previous studies. It can be proved that all muscle parameters in frontalization face are more weakened than those of real face, except muscle moving direction on each small area. Thus, this paper also designed muscle movement rebuilding and intensifying method, and through 3D face contours and Fréchet distance, muscular moving directions on each muscle area are extracted and muscle movement is strengthened following these moving directions to intensify the whole face expression. Through this way, nonfrontal facial expression can be recognized effectively.

Aerobics is one of the main contents of physical education, which has a positive role in promoting the health of young people. This paper mainly studies the parallel processing method of inertial aerobics multisensor data fusion. In this paper, an aerobics exercise system is designed, which uses digital filter to remove the noise generated in the process of exercise. In this paper, Kalman filter is used to filter the pulse error of accelerometer, and the data structure of unidirectional link is used to achieve the effect of sliding window, which can reduce the memory cost to the greatest extent. In this paper, the region of moving object is determined by horizontal and vertical projection of binary symmetric difference image. At the same time, the optimal feature combination is selected from the reduced features by feature subset selection, and the classification algorithm is used as the evaluation function in the optimization process. Finally, the collected data are tested, analyzed, and sorted out. The experimental data show that, after calibrating the sensor data, the static x-axis and y-axis data are about 0 g, and the z-axis data are about 1 g, which is closer to the real value. The results show that the attitude data collected by the inertial sensor can be stably transmitted to the software of the computer wirelessly for attitude reconstruction, and the recognition of each attitude and parameter has reached a high accuracy.

With the rapid development of the information age, Internet and other technologies have been making progress, people’s fitness awareness has been gradually enhanced, and sports fitness app has emerged as the times require. This paper mainly studies the step-counting function of physical training app for teenagers based on artificial intelligence. This paper uses the modular development method to achieve the functional requirements of the system as the goal, respectively, for parameter management, website configuration, system log, interface security settings, SMS configuration, WeChat template message and several functional modules to achieve system configuration. In this paper, three types of sensors are used to analyze the data changes in the process of walking through three types of data, and different weights are given as the results of step-counting. When the peak value of sensor data is measured, only the peak value of the primary axial data of each sensor is analyzed, which should be determined according to the actual axial value of the sensor. In this paper, the users’ evaluation indexes of sports fitness app are divided into two groups: importance and satisfaction, so the obtained data are directly divided into two groups: importance and satisfaction of user experience indexes of sports fitness app, and the two groups of data are matched with the sample t test to ensure the scientific conclusion. Finally, the advantages and disadvantages of the user experience of college students’ sports fitness app are analyzed through IPA analysis. Heuristic evaluation is carried out on the step app to score the second-level usability index of the app. The first-level usability index score and the total usability score of the step app are obtained by calculation. There is not much difference between male and female students who use sports apps. Among them, 288 are male students, accounting for 58.2% of the total and 16.4% are female students. The results show that the use of artificial intelligence technology can reduce the overall energy consumption of step-counting algorithm, so as to achieve an energy-saving step-counting algorithm.

This paper develops a novel group decision-making (GDM) approach for solving multiple-criteria group decision-making (MCGDM) problems with uncertainty. The hesitant fuzzy linguistic term sets (HFLTSs) are applied to elicit the decision makers’ linguistic preferences due to their distinguished efficiency and flexibility in representing uncertainty. However, the existing context-free grammar for linguistic description cannot allow generating the linguistic expressions completely free to limit the richness of HFLTSs, and the related methods for dealing with HFLTSs also have limitations in aggregating HFLTSs with different lengths and types. Therefore, this paper proposes extended context-free grammar and a novel GDM approach for HFLTSs, considering the advantages of the rough set theory and OWA operators. The rough set theory can manage the uncertainty existing in the fuzzy representation and deal with HFLTSs represented by the 2-tuple fuzzy linguistic model to get rough number sets. The OWA operator can aggregate these sets with different numbers of elements into an interval simply and objectively. Then, an extended VIKOR method based on the proposed GDM approach for HFLTSs is presented to solve the MCGDM problems. Finally, two examples are given to illustrate the applicability and validity of the developed GDM approach and the hesitant VIKOR method through sensitivity and comparison analysis with other existing approaches.

Dividing abstract object sets into multiple groups, called clustering, is essential for effective data mining. Clustering can find innate but unknown real-world knowledge that is inaccessible by any other means. Rodriguez and Laio have published a paper about a density-based fast clustering algorithm in Science called CFSFDP. CFSFDP is a highly efficient algorithm that clusters objects by using fast searching of density peaks. But with CFSFDP, the essential second step of finding clustering centers must be done manually. Furthermore, when the amount of data objects increases or a decision graph is complicated, determining clustering centers manually is difficult and time consuming, and clustering accuracy reduces sharply. To solve this problem, this paper proposes an improved clustering algorithm, ACDPC, that is based on data detection, which can automatically determinate clustering centers without manual intervention. First, the algorithm calculates the comprehensive metrics and sorts them based on the CFSFDP method. Second, the distance between the sorted objects is used to judge whether they are the correct clustering centers. Finally, the remaining objects are grouped into clusters. This algorithm can efficiently and automatically determine clustering centers without calculating additional variables. We verified ACDPC using three standard datasets and compared it with other clustering algorithms. The experimental results show that ACDPC is more efficient and robust than alternative methods.

With the development of artificial intelligence technology, deep learning has been applied to automatic modulation classification (AMC) and achieved very good results. In this paper, we introduced an improved deep neural architecture for implementing radio signal identification tasks, which is an important facet of constructing the spectrum-sensing capability required by software-defined radio. The architecture of the proposed network is based on the Inception-ResNet network by changing the several kernel sizes and the repeated times of modules to adapt to modulation classification. The modules in the proposed architecture are repeated more times to increase the depth of neural network and the model’s ability to learn features. The modules in the proposed network combine the advantages of Inception network and ResNet, which have faster convergence rate and larger receptive field. The proposed network is proved to have excellent performance for modulation classification through the experiment in this paper. The experiment shows that the classification accuracy of the proposed method is highest with the varying SNR among the six methods and it peaks at 93.76% when the SNR is 14 dB, which is 6 percent higher than that of LSTM and 13 percent higher than that of MentorNet, Inception, and ResNet purely. Besides, the average accuracy from 0 to 18 dB of the proposed method is 3 percent higher than that of GAN network. It will provide a new idea for modulation classification aiming at distraction time signal.

In this paper, we focus on the safety supervision of inland vessels. This paper especially aims at studying the vessel target detection and dynamic tracking algorithm based on computer vision and the target fusion algorithm based on multisensor. For the vessel video target detection and tracking, this paper analyzes the current widely used methods and theories. Additionally, facing the application scenarios and characteristics of inland vessels, a comprehensive vessel video target detection algorithm is proposed in this paper. It is combined with a three-frame difference method based on Canny edge detection and a background subtraction method based on mixed Gaussian background modeling. Besides, for the multisensor target fusion, the processing method of laser point cloud data and automatic identification system (AIS) data is analyzed in this paper. Based on the idea of fuzzy mathematics, this paper proposes a method for calculating the fuzzy correlation matrix with normal membership function, which realizes the fusion of vessel track features of laser point cloud data and AIS data under dynamic video correction. Finally, through this method, a set of vessel situation active intelligent perception systems based on multisensor fusion was developed. Experiments show that this method has better environmental applicability and detection accuracy than traditional manual detection and any single monitoring method.

In order to effectively enhance the low detection rates of dim and small targets caused by dynamic backgrounds, this paper proposes a detection algorithm for dim and small targets in sequence images based on spatiotemporal motion characteristics. With regard to the spatial domain, this paper proposes an improved anisotropic background filtering algorithm that makes full use of the gradient differences between the target and the background pixels in the eight directions of the spatial domain and selects the mean value of the three directions with the lowest diffusion function in the eight directions as the differential filter to obtain a differential image. Then, the paper proposes a directional energy correlation enhancement algorithm in the time domain. Finally, based on the above preprocessing operations, we construct a dim and small targets detection algorithm in sequence images with local motion characteristics, which achieves target detection by determining the number of occurrences of the target, the number of displacements, and the total cumulative area in these sequential images. Experiments show that the proposed detection algorithm in this paper can effectively improve the detection of dim and small targets in dynamic scenes.

Accurate identification of the distribution of coal seam is a prerequisite for realizing intelligent mining of shearer. This paper presents a novel method for identifying coal and rock based on a deep convolutional neural network (CNN). Three regularization methods are introduced in this paper to solve the overfitting problem of CNN and speed up the convergence: dropout, weight regularization, and batch normalization. Then the coal-rock image information is enriched by means of data augmentation, which significantly improves the performance. The shearer cutting coal-rock experiment system is designed to collect more real coal-rock images, and some experiments are provided. The experiment results indicate that the network we designed has better performance in identifying the coal-rock images.