Search

The NOvA collaboration reports cross-section measurements for $\nu_{\mu}$ charged-current interactions with low hadronic energy (maximum kinetic energy of 250 MeV for protons and 175 MeV for pions) in the NOvA Near Detector. The results are presented as a double-differential cross section as a function of the direct observables of the final-state muon kinematics. Results are also presented as a single-differential cross section as a function of the derived square of the four-momentum transfer, $Q^{2}$, and as a function of the derived neutrino energy. The data correspond to an accumulated 8.09$\times10^{20}$ protons-on-target (POT) in the neutrino mode of the NuMI beam, with a narrow band of neutrino energies peaked at 1.8 GeV. The analysis provides a sample of neutrino-nucleus interactions with an enhanced fraction of quasi-elastic and two-particle-two-hole (2p2h) interactions. This enhancement allows quantitative comparisons with various nuclear models. We find strong disagreement between data and theory-based models in various regions of the muon kinematic phase space, especially in the forward muon direction., Comment: 20 pages, 12 figures. The second version includes an additional citation and adds four previously missing authors

3C84 is a nearby radio source with a complex total intensity structure, showing linear polarisation and spectral patterns. A detailed investigation of the central engine region necessitates the use of VLBI above the hitherto available maximum frequency of 86GHz. Using ultrahigh resolution VLBI observations at the highest available frequency of 228GHz, we aim to directly detect compact structures and understand the physical conditions in the compact region of 3C84. We used EHT 228GHz observations and, given the limited (u,v)-coverage, applied geometric model fitting to the data. We also employed quasi-simultaneously observed, multi-frequency VLBI data for the source in order to carry out a comprehensive analysis of the core structure. We report the detection of a highly ordered, strong magnetic field around the central, SMBH of 3C84. The brightness temperature analysis suggests that the system is in equipartition. We determined a turnover frequency of $\nu_m=(113\pm4)$GHz, a corresponding synchrotron self-absorbed magnetic field of $B_{SSA}=(2.9\pm1.6)$G, and an equipartition magnetic field of $B_{eq}=(5.2\pm0.6)$G. Three components are resolved with the highest fractional polarisation detected for this object ($m_\textrm{net}=(17.0\pm3.9)$%). The positions of the components are compatible with those seen in low-frequency VLBI observations since 2017-2018. We report a steeply negative slope of the spectrum at 228GHz. We used these findings to test models of jet formation, propagation, and Faraday rotation in 3C84. The findings of our investigation into different flow geometries and black hole spins support an advection-dominated accretion flow in a magnetically arrested state around a rapidly rotating supermassive black hole as a model of the jet-launching system in the core of 3C84. However, systematic uncertainties due to the limited (u,v)-coverage, however, cannot be ignored., Comment: 15 pages, 6 figures, published in A&A

We measured the components of the 31-m-long vector between the two Very-Long-Baseline Interferometry (VLBI) antennas at the Kokee Park Geophysical Observatory (KPGO), Hawaii, with approximately 1 mm precision using phase-delay observables from dedicated VLBI observations in 2016 and 2018. The two KPGO antennas are the 20 m legacy VLBI antenna and the 12 m VLBI Global Observing System (VGOS) antenna. Independent estimates of the vector between the two antennas were obtained by the National Geodetic Survey (NGS) using standard optical surveys in 2015 and 2018. The uncertainties of the latter survey were 0.3 and 0.7 mm in the horizontal and vertical components of the baseline, respectively. We applied corrections to the measured positions for the varying thermal deformation of the antennas on the different days of the VLBI and survey measurements, which can amount to 1 mm, bringing all results to a common reference temperature. The difference between the VLBI and survey results are 0.2 +/- 0.4 mm, -1.3 +/- 0.4 mm, and 0.8 +/- 0.8 mm in the East, North, and Up topocentric components, respectively. We also estimate that the Up component of the baseline may suffer from systematic errors due to gravitational deformation and uncalibrated instrumental delay variations at the 20 m antenna that may reach +/-10 mm and -2 mm, respectively, resulting in an accuracy uncertainty on the order of 10 mm for the relative heights of the antennas. Furthermore, possible tilting of the 12 m antenna increases the uncertainties in the differences in the horizontal components to 1.0 mm. These results bring into focus the importance of (1) correcting to a common reference temperature the measurements of the reference points of all geodetic instruments within a site, (2) obtaining measurements of the gravitational deformation of all antennas, and (3) monitoring local motions of the geodetic instruments., Comment: 34 pages, 4 figures, to be published in Journal of Geodesy

In this article, we combine casting experiments and quantitative simulations to present a novel multiscale modeling approach to predict local primary dendritic spacings in metallic alloys solidified in conditions relevant to industrial casting processes. To this end, primary dendritic spacings were measured in instrumented casting experiments in Al-Cu alloys containing 1\,wt\% and 4\,wt\% of Cu, and they were compared to spacing stability ranges and average spacings in dendritic arrays simulated using phase-field (PF) and dendritic needle network (DNN) models. It is first shown that PF and DNN lead to similar results for the Al-1\,wt\%Cu alloy, using a dendrite tip selection constant calculated with PF in the DNN simulations. PF simulations cannot achieve quantitative predictions for the Al-4\,wt\%Cu alloy because they are too computationally demanding due to the large separation of scale between tip radius and diffusion length, a characteristic feature of non-dilute alloys. Nevertheless, the results of DNN simulations for non-dilute Al-Cu alloys are in overall good agreement with our experimental results as well as with those of an extensive literature review. Simulations consistently suggest a widening of the PDAS stability range with a decrease of the temperature gradient as the microstructure goes from cellular-dendrites to well-developed hierarchical dendrites.

Realistic synthetic observations of theoretical source models are essential for our understanding of real observational data. In using synthetic data, one can verify the extent to which source parameters can be recovered and evaluate how various data corruption effects can be calibrated. These studies are important when proposing observations of new sources, in the characterization of the capabilities of new or upgraded instruments, and when verifying model-based theoretical predictions in a comparison with observational data. We present the SYnthetic Measurement creator for long Baseline Arrays (SYMBA), a novel synthetic data generation pipeline for Very Long Baseline Interferometry (VLBI) observations. SYMBA takes into account several realistic atmospheric, instrumental, and calibration effects. We used SYMBA to create synthetic observations for the Event Horizon Telescope (EHT), a mm VLBI array, which has recently captured the first image of a black hole shadow. After testing SYMBA with simple source and corruption models, we study the importance of including all corruption and calibration effects. Based on two example general relativistic magnetohydrodynamics (GRMHD) model images of M87, we performed case studies to assess the attainable image quality with the current and future EHT array for different weather conditions. The results show that the effects of atmospheric and instrumental corruptions on the measured visibilities are significant. Despite these effects, we demonstrate how the overall structure of the input models can be recovered robustly after performing calibration steps. With the planned addition of new stations to the EHT array, images could be reconstructed with higher angular resolution and dynamic range. In our case study, these improvements allowed for a distinction between a thermal and a non-thermal GRMHD model based on salient features in reconstructed images., Comment: 20 pages, 15 figures, accepted for publication in A&A

We report about a 230 GHz very long baseline interferometry (VLBI) fringe finder observation of blazar 3C 279 with the APEX telescope in Chile, the phased submillimeter array (SMA), and the SMT of the Arizona Radio Observatory (ARO). We installed VLBI equipment and measured the APEX station position to 1 cm accuracy (1 sigma). We then observed 3C 279 on 2012 May 7 in a 5 hour 230 GHz VLBI track with baseline lengths of 2800 M$\lambda$ to 7200 M$\lambda$ and a finest fringe spacing of 28.6 micro-arcseconds. Fringes were detected on all baselines with SNRs of 12 to 55 in 420 s. The correlated flux density on the longest baseline was ~0.3 Jy/beam, out of a total flux density of 19.8 Jy. Visibility data suggest an emission region <38 uas in size, and at least two components, possibly polarized. We find a lower limit of the brightness temperature of the inner jet region of about 10^10 K. Lastly, we find an upper limit of 20% on the linear polarization fraction at a fringe spacing of ~38 uas. With APEX the angular resolution of 230 GHz VLBI improves to 28.6 uas. This allows one to resolve the last-photon ring around the Galactic Center black hole event horizon, expected to be 40 uas in diameter, and probe radio jet launching at unprecedented resolution, down to a few gravitational radii in galaxies like M 87. To probe the structure in the inner parsecs of 3C 279 in detail, follow-up observations with APEX and five other mm-VLBI stations have been conducted (March 2013) and are being analyzed., Comment: accepted for publication in A&A

In April 2002 an array of antennas operating at 129GHz successfully detected VLBI fringes on both continuum AGN and SiO maser sources. The 129GHz fringes on maser sources represent the highest frequency spectral line VLBI detections to date. The AGN 3C279 was detected on long baselines at both 129GHz (and at 147GHz, see Krichbaum et al in these proceedings) yielding fringe spacings of 50-56 micro arc seconds, an angular resolution record. The array consisted of the University of Arizona Kittpeak 12m antenna, the Heinrich Hertz 10m Telescope (HHT), and the IRAM 30m dish on Pico Veleta. At 129GHz, a number of evolved stars and several young stellar objects exhibit strong SiO maser emission in the v=1 J=3-2 transition. Preliminary cross power spectra of SiO masers around the red hypergiant VYCMa on the HHT-KittPeak baseline ~190km are consistent with multiple spatially separate maser spots associated with the star. Future observations will include continuum observations of the radio source at the Galactic Center, SgrA*, and higher frequency maser lines including HCN and methanol., Comment: 4 pages, 3 figures, appears in: Proceedings of the 6th European VLBI Network Symposium held on June 25th-28th in Bonn, Germany. Edited by: E. Ros, R.W. Porcas, A.P. Lobanov, and J.A. Zensus. New version includes all editors in paper header

At 147 GHz (2mm wavelength), we detected three prominent AGN (NRAO150, 3C279, 1633+382) with Very Long Baseline Interferometry (VLBI) with an angular resolution of only 18 micro-arcseconds on the baseline between two antennas in Arizona (10m HHT and 12m KittPeak) and the IRAM 30m antenna on Pico Veleta in Spain. This is a new world record in radio interferometry and astronomical imaging and opens fascinating future possibilities to directly image and study the innermost regions in Quasars and other Active Galactic Nuclei., Comment: 4 pages, 3 figures, appears in: Proceedings of the 6th European VLBI Network Symposium held on June 25th-28th in Bonn, Germany. Edited by: E. Ros, R.W. Porcas, A.P. Lobanov, and J.A. Zensus