Search

Neural interfaces are well-established as a tool to understand the behaviour of the nervous system viarecording and stimulation of living neurons, as well as serving as neural prostheses. Conventional neural interfaces based on metals and carbon-based materials are generally optimised for high conductivity; however, a mechanical mismatch between the interface and the neural environment can significantly reduce long-term neuromodulation efficacy by causing an inflammatory response. This paper presents a soft composite material made of gelatin methacryloyl (GelMA) containing graphene oxide (GO) conjugated with gold nanorods (AuNRs). The soft hydrogel presents stiffness within the neural environment range of modulus below 5 kPa, while the AuNRs, when exposed to light in the near infrared range, provide a photothermal response that can be used to improve the spatial and temporal precision of neuromodulation. These favourable properties can be maintained at safer optical power levels when combined with electrical stimulation. In this paper we provide mechanical and biological characterization of the optical activity of the GO-AuNR composite hydrogel. The optical functionality of the material has been evaluated viaphotothermal stimulation of explanted rat retinal tissue. The outcomes achieved with this study encourage further investigation into optical and electrical costimulation parameters for a range of biomedical applications.

There are numerous biomedical applications where the interfacial shearing of surfaces can cause wear and friction, which can lead to a variety of medical complications such as inflammation, irritation, and even bacterial infection. We introduce a novel nanomaterial additive comprised of two-dimensional graphene oxide nanosheets (2D-NSCs) coated with lubricin (LUB) to reduce the amount of tribological stress in biomedical settings, particularly at low shear rates where boundary lubrication dominates. LUB is a glycoprotein found in the articular joints of mammals and has recently been discovered as an ocular surface boundary lubricant. The ability of LUB to self-assemble into a “telechelic” brush layer on a variety of surfaces was exploited here to coat the top and bottom surfaces of the ultrathin 2D-NSCs in solution, effectively creating a biopolymer-coated nanosheet. A reduction in friction of almost an order of magnitude was measured at a bioinspired interface. This reduction was maintained after repeated washing (5×), suggesting that the large aspect ratio of the 2D-NSCs facilitates effective lubrication even at diluted concentrations. Importantly, and unlike LUB-only treatment, the lubrication effect can be eliminated over 15 rinsing cycles, suggesting that the LUB-coated 2D-NSCs do not exhibit any binding interactions with the shearing surfaces. The effective lubricating properties of the 2D-NSCs combined with full reversibility through rinsing make the LUB-coated 2D-NSCs an intriguing candidate as a lubricant for biomedical applications.

Self-assembled lubricin (LUB) monolayers are an effective antiadhesive coating for biomedical applications. Long deposition times and limited control over the monolayer grafting density remain impediments to commercialization and applications in advanced sensor technologies. This work describes a novel potential pulse-facilitated coating method that reduces coating times to mere seconds while also providing high-level control over the achieved grafting density. This is the first time that the potential pulse-facilitated method is applied for direct assembling of a large and complex polyelectrolyte.

In the field of bionics, the long-term effectiveness of implantable bionic interfaces depends upon maintaining a “clean” and unfouled electrical interface with biological tissues. Lubricin (LUB) is an innately biocompatible glycoprotein with impressive antifouling properties. Unlike traditional antiadhesive coatings, LUB coatings do not passivate electrode surfaces, giving LUB coatings great potential for controlling surface fouling of implantable electrode interfaces. This study characterizes the antifouling properties of bovine native LUB (N-LUB), recombinant human LUB (R-LUB), hyaluronic acid (HA), and composite coatings of HA and R-LUB (HA/R-LUB) on gold electrodes against human primary fibroblasts and chondrocytes in passive and electrically stimulated environments for up to 96 h. R-LUB coatings demonstrated highly effective antifouling properties, preventing nearly all adhesion and proliferation of fibroblasts and chondrocytes even under biphasic electrical stimulation. N-LUB coatings, while showing efficacy in the short term, failed to produce sustained antifouling properties against fibroblasts or chondrocytes over longer periods of time. HA/R-LUB composite films also demonstrated highly effective antifouling performance equal to the R-LUB coatings in both passive and electrically stimulated environments. The high electrochemical stability and long-lasting antifouling properties of R-LUB and HA/R-LUB coatings in electrically stimulating environments reveal the potential of these coatings for controlling unwanted cell adhesion in implantable bionic applications.

The human tissues most sensitive to electrical activity such as neural and muscle tissues are relatively soft, and yet traditional conductive materials used to interface with them are typically stiffer by many orders of magnitude. Overcoming this mismatch, by creating both very soft and electroactive materials, is a major challenge in bioelectronics and biomaterials science. One strategy is to imbue soft materials, such as hydrogels, with electroactive properties by adding small amounts of highly conductive nanomaterials. However, electroactive hydrogels reported to date have required relatively large volume fractions (>1%) of added nanomaterial, have shown only modest electroactivity, and have not been processable via additive manufacturing to create 3D architectures. Here, we describe the development and characterization of improved biocompatible photo-cross-linkable soft hybrid electroactive hydrogels based on gelatin methacryloyol (GelMA) and large area graphene oxide (GO) flakes, which resolve each of these three limitations. The addition of very small amounts (less than a 0.07% volume fraction) of GO to a 5% w/v GelMA hydrogel resulted in a dramatic (∼35-fold) decrease in the impedance at 1 Hz compared with GelMA alone. The GelMA/GO coated indium tin oxide (ITO) electrode also showed a considerable reduction in the impedance at 1 kHz (down to 170 Ω compared with 340 Ω for the GelMA-coated ITO), while charge injection capacity increased more than 6-fold. We attribute this enhanced electroactivity to the increased electroactive surface area contributed by the GO. Despite this dramatic change in electroactivity, the GelMA/GO composite hydrogels’ mechanical properties were only moderately affected. Mechanical properties increased by ∼2-fold, and therefore, the hydrogels’ desired softness of <4 kPa was retained. Also, we demonstrate how light attenuation through the gel can be used to create a stiffness gradient with the exposed surface of the gel having an elastic modulus of <1.5 kPa. GO addition also enhanced the rheological properties of the GelMA composites, thus facilitating 3D extrusion printing. GelMA/GO enhanced filament formation as well as improved printability and the shape fidelity/integrity of 3D printed structures compared with GelMA alone. Additionally, the GelMA/GO 3D printed structures presented a higher electroactive behavior than nonprinted samples containing the same GelMA/GO amount, which can be attributed to the higher electroactive surface area of 3D printed structures. These findings provide new rational choices of electroactive hydrogel (EAH) compositions with broad potential applications in bioelectronics, tissue engineering, and drug delivery.

Lubricin (LUB, aka PRG4), a mucin-like glycoprotein, is best known for the significant role it plays in the boundary lubrication, wear protection, and adhesion control systems in human joints. However, LUB exhibits a number of diverse and useful properties, including a remarkable ability to self-assemble into a telechelic brush structure onto virtually any substrate. This self-assembly behavior has spawned the emergence of numerous nontraditional applications of LUB coatings in numerous areas such as microfluidics, electrochemical sensors, contact lenses, antifouling surfaces, and bionic neural interfaces. Although LUB will readily self-assemble on most substrates, it has become apparent that the substrate has a significant influence on the LUB layer’s demonstrated lubrication, antiadhesion, electrokinetic, and size-selective transport properties; however, investigations into LUB–substrate interactions and how they influence the self-assembled LUB layer structure remain a neglected aspect of LUB research. This study utilizes AFM force spectroscopy to directly assess the adhesion energy of LUB molecules adsorbed to a wide variety of different substrates which include inorganic, polymeric, and metallic materials. An analysis of the steric repulsive forces measured on approach provides a qualitative assessment of the LUB layer’s mechanical modulus, related to the chain packing density, across substrates. These modulus measurements, combined with characteristic features and the dwell time dependence of the LUB adhesion forces provide insight into the organization and uniformity of the LUB brush structure. The results of these measurements indicate that LUB interactions with different substrates are highly variable and substrate-specific, resulting in a surprisingly broad spectrum of adhesion energies and layer properties (i.e., chain density, uniformity, etc.) which are not, themselves, correlated or easily predicted by substrate properties. In addition, this study finds exceptionally poor LUB adhesion to both mica and poly(methyl methacrylate) surfaces that remain widely used substrates for constructing model surfaces in fundamental tribology studies which may have significant implications for the findings of a number of foundational studies into LUB tribology and molecular synergies.

This study investigates the electrochemical behavior of GelMA-based hydrogels and their interactions with PC12 neural cells under electrical stimulation in the presence of conducting substrates. Focusing on indium tin oxide (ITO), platinum, and gold mylar substrates supporting conductive scaffolds composed of hydrogel, graphene oxide, and gold nanorods, we explored how the substrate materials affect scaffold conductivity and cell viability. We examined the impact of an optimized electrical stimulation protocol on the PC12 cell viability. According to our findings, substrate selection significantly influences conductive hydrogel behavior, affecting cell viability and proliferation as a result. In particular, the ITO substrates were found to provide the best support for cell viability with an average of at least three times higher metabolic activity compared to platinum and gold mylar substrates over a 7 day stimulation period. The study offers new insights into substrate selection as a platform for neural cell stimulation and underscores the critical role of substrate materials in optimizing the efficacy of neural interfaces for biomedical applications. In addition to extending existing work, this study provides a robust platform for future explorations aimed at tailoring the full potential of tissue-engineered neural interfaces.

In vitrohuman skin models are evolving into versatile platforms for the study of skin biology and disorders. These models have many potential applications in the fields of drug testing and safety assessment, as well as cosmetic and new treatment development. The development of in vitroskin models that accurately mimic native human skin can reduce reliance on animal models and also allow for more precise, clinically relevant testing. Recent advances in biofabrication techniques and biomaterials have led to the creation of increasingly complex, multilayered skin models that incorporate important functional components of skin, such as the skin barrier, mechanical properties, pigmentation, vasculature, hair follicles, glands, and subcutaneous layer. This improved ability to recapitulate the functional aspects of native skin enhances the ability to model the behavior and response of native human skin, as the complex interplay of cell-to-cell and cell-to-material interactions are incorporated. In this review, we summarize the recent developments in in vitroskin models, with a focus on their applications, limitations, and future directions.

Schizophrenia (SCZ) is a debilitating mental disorder which results in high healthcare and loss of productivity costs to society. This disease remains poorly understood, however there is increasing evidence suggesting a role for oxidative damage in the disease etiology. We aimed to examine the effect of the conducting polymer polypyrrole on the growth and morphology of both wildtype and neuregulin-1 knock out (NRG-1 +/−) explant cells. Polypyrrole is an organic conducting polymer known to be cytocompatible and capable of acting as a platform for effective stimulation of neurons. Here we demonstrate for the first time the ability of this material to mediate processes occurring in disease affected neurons: schizophrenic model cortical neurons. Prefrontal cortical cells were grown on conducting polymer scaffolds of specific composition and showed significantly increased neurite branching and outgrowth length on the polymers compared to controls. Concurrently, a more significant enhancement was seen in both parameters in the NRG-1 +/− model cells. This finding implies that conducting polymers such as polypyrrole may be utilised to overcome neuro-functional deficits associated with neurological disease in humans.

Polythiophenes are attractive candidate polymers for use in synthetic cell scaffolds as they are amenable to modification of functional groups as a means by which to increase biocompatibility. In the current study we analysed the physical properties and response of primary myoblasts to three thiophene polymers synthesized from either a basic bithiophene monomer or from one of two different thiophene monomers with alkoxy functional groups. In addition, the effect of the dopants pTS−and ClO4−was investigated. In general, it was found that pTS−doped polymers were significantly smoother and tended to be more hydrophilic than their ClO4−doped counterparts, demonstrating that the choice of dopant significantly affects the polythiophene physical properties. These properties had a significant effect on the response of primary myoblasts to the polymer surfaces; LDH activity measured from cells harvested at 24 and 48 h post-seeding revealed significant differences between numbers of cells attaching to the different thiophene polymers, whilst all of the polymers equally supported cell doubling over the 48 h period. Differences in morphology were also observed, with reduced cell spreading observed on polymers with alkoxy groups. In addition, significant differences were seen in the polymers’ ability to support myoblast fusion. In general pTS−doped polymers were better able to support fusion than their ClO4−doped counterparts. These studies demonstrate that modification of thiophene polymers can be used to promote specific cellular response (e.g.proliferation over differentiation) without the use of biological agents.

Novel biosynthetic platforms supporting ex vivo growth of partially differentiated muscle cells in an aligned linear orientation that is consistent with the structural requirements of muscle tissue are described. These platforms consist of biodegradable polymer fibers spatially aligned on a conducting polymer substrate. Long multinucleated myotubes are formed from differentiation of adherent myoblasts, which align longitudinally to the fiber axis to form linear cell‐seeded biosynthetic fiber constructs. The biodegradable polymer fibers bearing undifferentiated myoblasts can be detached from the substrate following culture. The ability to remove the muscle cell‐seeded polymer fibers when required provides the means to use the biodegradable fibers as linear muscle‐seeded scaffold components suitable for in vivo implantation into muscle. These fibers are shown to promote differentiation of muscle cells in a highly organized linear unbranched format in vitro and thereby potentially facilitate more stable integration into recipient tissue, providing structural support and mechanical protection for the donor cells. In addition, the conducting substrate on which the fibers are placed provides the potential to develop electrical stimulation paradigms for optimizing the ex vivo growth and synchronization of muscle cells on the biodegradable fibers prior to implantation into diseased or damaged muscle tissue.

Three-dimensional (3D) printing and 3D bioprinting are promising technologies for a broad range of healthcare applications from frontier regenerative medicine and tissue engineering therapies to pharmaceutical advancements yet must overcome the challenges of biocompatibility and resolution. Through comparison of traditional biofabrication methods with 3D (bio)printing, this review highlights the promise of 3D printing for the production of on-demand, personalized, and complex products that enhance the accessibility, effectiveness, and safety of drug therapies and delivery systems. In addition, this review describes the capacity of 3D bioprinting to fabricate patient-specific tissues and living cell systems (e.g., vascular networks, organs, muscles, and skeletal systems) as well as its applications in the delivery of cells and genes, microfluidics, and organ-on-chip constructs. This review summarizes how tailoring selected parameters (i.e., accurately selecting the appropriate printing method, materials, and printing parameters based on the desired application and behavior) can better facilitate the development of optimized 3D-printed products and how dynamic 4D-printed strategies (printing materials designed to change with time or stimulus) may be deployed to overcome many of the inherent limitations of conventional 3D-printed technologies. Comprehensive insights into a critical perspective of the future of 4D bioprinting, crucial requirements for 4D printing including the programmability of a material, multimaterial printing methods, and precise designs for meticulous transformations or even clinical applications are also given.

Illustration of liquid crystal graphene oxide‐gold nanorods (LCGO‐AuNR) film used as interface for electrical and near‐infrared (NIR) co‐stimulation of neurons. In article number 1801321, Simon E. Moulton and co‐workers develop an LCGO‐AuNR nanocomposite film with promising electroactivity and photoactivity in the NIR. Good biocompatibility with neuronal cell line is also shown. Illustration credit: George Chiramal Davis.

For decades, electrode–tissue interfaces are pursued to establish electrical stimulation as a reliable means to control neuronal cells behavior. However, spreading of electrical currents in tissues limits its spatial precision. Thus, optical cues, such as near‐infrared (NIR) light, are explored as alternatives. Presently, NIR stimulation requires higher energy input than electrical methods despite introduction of light absorbers, e.g., gold nanoparticles. As potential solution, NIR and electrical costimulation are proposed but with limited interfaces capable of sustaining this stimulation technique. Here, a novel electroactive nanocomposite with photoactive properties in the NIR range is constructed by N‐(3‐dimethylaminopropyl)‐N′‐ethylcarbodiimide hydrochloride/N‐hydroxysulfosuccinimide sodium (EDC)/NHS conjugation of liquid crystal graphene oxide (LCGO) to protein‐coated gold nanorods (AuNR). The liquid crystal graphene oxide–gold nanorod nanocomposite (LCGO–AuNR) is fabricated into a hydrophilic electrode‐coating via drop‐casting, making it appropriate for versatile electrode–tissue interface fabrication. UV–vis spectrophotometry results demonstrate that LCGO–AuNR presents an absorbance peak at 798 nm (NIR range). Cyclic voltammetry measurements further confirm its electroactive capacitive properties. Furthermore, LCGO–AuNR coating supports cell adhesion, proliferation, and differentiation of NG108‐15 neuronal cells. This biocompatible interface is anticipated, with ideal electrical and optical properties for NIR and electrical costimulation, to enable further development of the technique for energy‐efficient and precise neuronal cell modulation. Today, electrical and optical neuronal cell stimulation techniques require high precision and energy efficiency, respectively. As a solution, an electrode–tissue interface made of liquid crystal graphene oxide–gold nanorods composite is constructed for electrical and near infrared (NIR) costimulation of neuronal cells. Its photoactivity in the near‐infrared range, electroactivity, and biocompatibility with neuronal cells shows its promising potential for this application.

The impedance of electrodes at 1 kHz is typically reported to assess the signal-to-noise ratio of neural recording electrodes. The impedance response of platinum electrodes modified by poly-3,4-ethylenedioxythiophene doped with dextran sulfate has been examined. The modified electrodes have lower impedance at low and intermediate frequencies compared to unmodified electrodes. The impedance and phase angle at low frequencies is strongly correlated with the electrode area. The geometric and linear diffusion charge densities of the modified electrodes are also dependent on the electrode area and impedance at low frequencies. A 3 time constant equivalent circuit provided a better fit to the impedance than a 2 time constant model. The decrease in impedance at low frequencies indicates PEDOT-DS will be suitable for reducing the thermal noise and increasing the signal-to-noise ratio for neural recording electrodes.

Bio‐synthetic platforms, consisting of a conducting polymer substrate overlaid with aligned biodegradable fibers promote the linear growth (ex vivo) of partially differentiated muscle fibers, consistent with the structural requirements of skeletal muscle in vivo, as described by J. M. Razal et al. on page 3381. The conducting surface facilitates development of electrical stimulation paradigms for optimizing muscle growth and development ex vivo that may potentially be applied to repair diseased or damaged muscle.