Search

After a coal seam is mined, the oxidized coal left in its goaf is prone to water immersion, and spontaneous combustion accidents involving water-immersed coal may easily occur when mining the underlying coal seam. Using scanning electron microscopy and nitrogen adsorption experimental methods, the physical structure of high-temperature pre-oxidized water-immersed coal samples was characterized. By means of infrared spectroscopy, electron spin resonance (ESR) and simultaneous thermal analysis, the microscopic characteristics of the coal samples and the endothermic and exothermic characteristics of the oxidative combustion process were studied. The results showed that a specific pre-oxidation soaking time generated more oxidation pores in the coal sample, causing more water to become trapped in the pores and increasing the secondary oxidation heat absorption. High-temperature oxidation promoted the conversion of coal sample functional groups (FG) and free radical active sites, Water immersion led to the formation and loss of FG, and the longer the water immersion time was, the greater the loss. The larger average pore size of the pre-oxidized water-immersed coal sample provided more coal-oxygen contact sites, and the breaking of chemical bonds in the FG during the secondary oxidation process accelerated the heat release and promoted the oxidative re-ignition of the coal sample. The spontaneous combustion of water-immersed coal in the goaf can be prevented by controlling the high oxidation temperature and water immersion time. [ABSTRACT FROM AUTHOR]

Quaternary mudstone biogas reservoirs in the Qaidam Basin have shown great potential. However, complex pore structures with high clay contents and high heterogeneity limit the understanding of the storage and migration principles of these reservoirs. In this paper, HPMI and nitrogen adsorption experiments, in combination with NMR experiments under water saturation, centrifugation, various drying temperatures and other conditions, were adopted to determine the pore structure characteristics. Specifically, the reservoir space types and pore radius distribution characteristics were clarified. The cutoff values for different types of pores were identified based on the water-saturated mudstone NMR T2 spectra for full aperture distribution scales jointly characterized by mercury injection and nitrogen adsorption experiments. Furthermore, the three pore components and the saturation of different fluids were obtained. The research results indicate that the mudstone biogas reservoir has developed various reservoir spaces, and the pore size is primarily in the micronanometer range. The average total porosity reaches 27.28%, but the proportion of movable water pores is only 9.23% with poor fluid mobility, and the fluids in the pores are mostly capillary-bound water and clay-bound water. Among the different lithologies, argillaceous sand is more likely to become a good production layer. [ABSTRACT FROM AUTHOR]

ABSTRACT Rock masses in alpine regions inevitably undergo freeze–thaw (F–T) cycles, which affects the safety of infrastructure such as slopes, with shear failure being a significant concern. This study investigates the Mode II fracture behavior of F–T treated granite via the short core in compression (SCC) test, analyzing the related physical properties and mechanical properties while also discussing F–T damage mechanism at a microscopic level. Results reveal that as F–T cycles increase, the dynamic elastic modulus and P‐wave velocity decrease, whereas porosity and backbone fractal dimension of pore scale increase, indicating a transition towards a large‐scale pore. Mode II fracture toughness decreased by 31.19% and fracture process zone width increased by 248.49% with F–T cycles rising from 0 to 80, and related fractal dimension of surface morphology also increased by 11.17%. Microscopic observation reveals the microstructure deterioration induced by F–T treatment, indicating the correlation between microscopic damage and macroscopic fracture properties. [ABSTRACT FROM AUTHOR]

Nowadays, when regenerable alternative green sources are attracting more caution under sustainability targets, kapok and coconut fibers, known as natural fibers, have come to the fore as a very significant raw material source. In this experimental study, compressive strength, thermal insulation, and pore structure characteristics of kapok fiber (KP)– and coconut fiber (CC)–incorporated concrete samples under different curing conditions were analyzed. For that purpose, randomly distributed fiber-incorporated concrete mixtures containing 0%, 0.5%, 1%, and 1.5% KP and CC fiber by the weight of cement were prepared and under H2O2 and NaClO curing conditions, the effects of KP and CC fiber inclusion on properties mentioned above of fiber-incorporated concrete samples were researched in detail. Experimental results depict that a maximum thermal conductivity coefficient decrease of 24.31% was detected at a content ratio of 1.5% by the reason of the pore modification effect of used natural fibers in the H2O2 curing group. Because of the remarkable pore modification effect of KP fiber incorporation into the cement matrix compared to the CC fiber inclusion cases, strong linear correlations revealing the insulation-strength mechanism could be detected for both H2O2 and NaClO curing cases. This work intends to promote sustainable development in the building industry by integrating natural fibers into concrete mixtures as an innovative design approach. [ABSTRACT FROM AUTHOR]

In order to tackle the issue of excessive coal dust and hydrogen sulfide (H2S) concurrently in underground coal mines, an alkaline dust suppressant was formulated by combining surfactant sodium sec-alkyl sulfonate (SAS60) and sodium carbonate (Na2CO3) at a certain mass ratio, meant for injection into coal seams. This study principally targeted long-flame coal extracted from Hequ County, located in Shanxi Province, China. The objective was to investigate and analyze the underlying process of how alkaline dust suppressants affect the wettability of coal. A comprehensive strategy including contact angle determination, Fourier transform infrared absorption spectrometer(FTIR) analysis, low-temperature nitrogen adsorption tests, scanning electron microscope(SEM) experimental studies, and molecular dynamics simulations was employed for this examination. The results revealed that merging Na2CO3 with SAS60 could reduce the coal's contact angle. Despite the core structure of the coal surface staying unchanged after alkaline dust suppressant treatment, a rise in the number of hydrophilic functional groups was observed. This count notably surpassed the amount of hydrophobic functional groups, consequently boosting the coal's hydrophilicity. The permeability of the examined coal specimens was chiefly affected by the existence of macropores and mesopores. Processing with 0.05 wt% SAS60 and 1.0 wt% Na2CO3, the coal acquired additional pores and cracks, causing an upswing of average pore size by 25.79% and a 30.64% increase in the maximum gas adsorption. This facilitated more straightforward infiltration of water into the coal dust. Molecular dynamics simulation outcomes indicated a closer affiliation between coal and water following the incorporation of Na2CO3. It led to a heightened activity in water molecule movement, fortifying intermolecular electrostatic interactions, and fostering the creation of hydrogen bonds. Consequently, this improved the coal's wettability. The increase in the mass fraction of Na2CO3 directly corresponds to a more considerable enhancement in the solution's ability to wet the coal. The outcomes of the molecular dynamics simulation validated the experimental results' precision. [ABSTRACT FROM AUTHOR]

In this work, nanostructured and transparent cellulose aerogels are synthesized via a purely salt induced approach from non‐modified microcrystalline cellulose type II. The production process requires in contrast to state of the art methods no pretreatment of cellulose or use of expensive cellulose‐solvents: it consists of hydrogel formation via cross‐linking of cellulose with calcium ions, a solvent exchange and a supercritical drying step. A systematic multiparameter study reveals that a high level of structural control is achievable: ratios of macro‐ to mesoporosity and the size of mesopores can be tailored by adjustment of the calcium ion content, while keeping a high overall porosity in the range of 92% – 96 %. The build‐up of homogeneous, fine pore structures results in a significant increase of the specific surface area as compared to conventional calcium‐free aerogels (684 vs. 300 m2 g−1). Remarkably, the Ca2+‐cross‐linking renders aerogels transparent, with Rayleigh scattering being the dominant scattering mechanism. Additional ion exchange to Ca2+ in the hydrogel‐state leads to further reduction of the pore size and to products with optimized optical properties, e.g., light transmission of 91% at an incidents light wavelength of 800 nm and a substrate thickness of 1.5 mm. [ABSTRACT FROM AUTHOR]

Alkali dissolution is an effective method to regulate the pore structure of porous mineral material. The main chemical composition of diatomite is amorphous SiO 2 , which can be dissolved in alkali dissolution. The diatomite samples with alkali dissolution treatment were systematacially characterized by the particle size analysis, low temperature nitrogen adsorption, MIP, fractal theory, SEM, TEM, XRD, FTIR and surface hydroxyl density to analyze the pore structure and surface properties. And the humidity control performance of diatomite was tested under different temperatures and relative humidities. The relationship among pore structure, surface properties and humidity control performance were analyzed. The results show that alkali dissolution can regulate the mesoporous and macroporous of diatomite, and some new microporous can generate at high alkali dosage. The specific surface area, mesoporous pore volume, proportion of macroporous volume, surface roughness, heterogeneity of pore structure and number of hydroxyl groups on the surface of diatomite are important factors which determining the humidity control performance. The humidity control performance of diatomite is positively correlated with the specific surface area, mesoporous volume, surface roughness, heterogeneity of pore structure and number of hydroxyl groups on the surface, while is negatively correlated with the proportion of macroporous volume. [ABSTRACT FROM AUTHOR]

Introduction: Pore structure and geometry are crucial in scaffold development for tissue engineering. From this viewpoint, pore geometry characterization methods will aid in understanding the influence of pore structure (pore size and diffusivity) on its properties. These properties determine how oxygen and water enter the scaffold, forming adsorption states. Previous studies showed that the addition of graphene (G) to polycaprolactone (PCL) increased the pore size, and played a significant role in tissue regeneration. Therefore, this study aimed to evaluate pore structure, geometry, and viability that are suitable for osteogenesis. Materials and methods: Morphology, size, and size distribution of PCL and PCL/G scaffolds were measured at concentrations of 1, 2, and 3 wt% G for the pore structure, while the connectivity of the scaffold's pore was analyzed using the geodesic tortuosity. This is essential because these factors promote the viability of osteogenesis-supporting cells. Results and discussion: The results showed that 3 wt% G had a good water diffusivity rate, larger pores, better connectivity, and viability than other concentrations. Conclusion: In conclusion, the presence of G in scaffolds affects the pore geometry and structure. This results in several advantageous effects that support osteogenesis, such as increased water and nutrient uptake, enhanced waste metabolism transport, and increased viability of the cells. [ABSTRACT FROM AUTHOR]

Rock pore structure coupled with fluid pressure plays an important role in controlling fault slip behavior. Observation of fluid-induced seismicity in geoenergy extraction has raised fundamental questions about the physics of fault rock structure and fault frictional stability in the presence of fluid. Here, we change the pore structure of faults by thermal treatment and report on the frictional stability of granite faults with pore evolution and pore fluid pressure in velocity stepping experiments under the rate-and-state framework, where the variation of pore fluid is monitored. The experiments under constant fluid pressure show that pore structure propagation leads to an increase in friction coefficient from 0.71 to 0.78. As the degree of pore propagation increases, the drained fault exhibits a transition from velocity strengthening to weakening behavior. The decrease in frictional stability could be caused by the coupling between the pore fluid and the well-connected pores, namely “fluid oscillation”. Pore pressure overpressurization could develop and cause non-uniform stress distribution along the fault surface due to pore fluid oscillation at velocity steps. The time required to equilibrate fluid pressure could be prolonged by fluid oscillation, leading to intrinsic velocity strengthening behavior appearing as velocity weakening. The decrease in rate-and-state parameter with elevating pore fluid pressure on high-porosity fault corroborates the fluid-induced fault destabilization. The fluid oscillation at the greater pore pressure could be responsible for fault reactivation. Therefore, the coupling effect of rock pore structure with pore fluid could be a potential mechanism governing fault frictional stability. [ABSTRACT FROM AUTHOR]

Ground granulated blast-furnace slag (GGBFS) is well known to be capable of improving the performance of cement-based materials, but few studies focus on the impact of its large dosage on concrete containing basalt powder. In this study, the compressive strength and chloride permeability of cement-based materials with compound mineral admixtures (CMAs) containing high-volume GGBFS, basalt powder and desulfurisation gypsum were investigated. The results showed that the mortar strengths at 3, 7 and 28 days decreased with increasing GGBFS content, but that at 56 and 84 days increased with the addition of 45 wt% GGBFS. This is because the activity of GGBFS at an early stage has not been stimulated and the pozzolanic effect is exerted at a later stage. Moreover, cement replacement with up to 55 wt% GGBFS caused a significant decrease in the chloride diffusion coefficient of the mortar and concrete. Furthermore, the incorporation of GGBFS led to a remarkable refinement in pore structure of the hardened paste due to pozzolanic and filler effects. Therefore, the partial replacement of cement with high CMA contents (≥70 wt%) in concrete is desirable for ocean projects requiring low chloride permeability, and significantly reduces carbon dioxide emissions. [ABSTRACT FROM AUTHOR]

The modification of petroleum resin (PR) by catalytic hydrogenation is an upgrading technology for producing high-value-added hydrogenated petroleum resin (HPR) from of pyrolysis petroleum by-product. This research employed alumina supports with different pore size distributions to prepare supported Mo-Ni type catalysts and investigated their catalytic hydrogenation performance on C9 petroleum resin. Catalysts prepared with bimodal pore alumina (BPA) supports effectively overcome the limitations of internal diffusion and increase the quantity of active sites, thus increasing the catalytic activity for hydrogenation. The experimental results demonstrated that MoNi/BPA achieved a hydrogenation degree of 99.94% for HC9PR, with the hydrogenated product having a Pt–Co colour of 2.37 Hazen. After 140 h of reaction, the hydrogenation degree of HC9PR remained at 96.51%, and the Pt–Co colour value was lower than 40 Hazen. This investigation confirms that solving the mass transfer issues of petroleum resin molecules in the pores of supported catalysts is key to designing efficient hydrogenation catalysts for petroleum resin. [ABSTRACT FROM AUTHOR]

Radon release rate is one of the most important indicators to assess the environmental radon hazard. In the loess-covered area of northern China, the decay of uranium ore associated with the coal seams has caused elevated radon concentrations in overlying soil layers, significantly increasing the risk of various respiratory diseases to residents. In this paper, the effects of burial depth and soil type on radon release rate were investigated by X-ray diffraction (XRD) analysis, low-temperature nitrogen adsorption (LTNA) experiments, and measurement of radon concentrations in the soil based on the pore structure characteristics of soil layers. The results showed that all N2 adsorption isotherms in the soil were inverse-S shaped with well-developed mesopores. The number of mesoporous materials was positively correlated with the radon release rate of the soil. The overall tendency of the radon release rate was to firstly increase and then decrease with increasing depth. The relative degree of variation in radon exhalation rate between adjacent soil layers was in the order as follows: red clay > paleosoil > loess > pedocal. The results of this study can help to understand the release pattern of radon in different soils and provide valuable references in reflecting the characteristics of radon release in regional soils. [ABSTRACT FROM AUTHOR]

Lightweight geopolymer has good physical and mechanical properties, thermal and chemical stability and low carbon dioxide emissions. The development of high-strength lightweight geopolymer concrete (LGC) for load-bearing structures can expand geopolymer applications. The use of ground granulated blast-furnace slag (GGBFS) to improve the mechanical properties and pore structure of LGC was investigated. The ultimate compressive stress of LGC containing GGBFS were analysed, as well as the variation in microscopic pore structure. Specimens of LGCs with different strengths (LC20, LC30 and LC40) were investigated. As the GGBFS content increases, the ultimate compressive stress and specific strength of LGC increases, while the strain corresponding to the peak stress decreases, indicating that the mechanical properties and deformation resistance of LGC are improved. The carbon dioxide emissions of LGC are less than those of cement-based lightweight concrete, indicating that LGC has good sustainability. Moreover, the addition of GGBFS can produce more gel and reduce the volume proportion of capillary pores and air pores, resulting in LGC densification. Recommended GGBFS contents for strength grades LC20, LC30 and LC40 are 0–12.7%, 12.7–24.6% and 24.6–30%, respectively. The LGC is lightweight and has high strength, and has potential for application in civil engineering. [ABSTRACT FROM AUTHOR]

Honeycomb mullite ceramics with controllable pore geometries were prepared using stereolithography 3D printing. The influence of sintering temperature on the phase evolution, microstructure and compressive strength of honeycomb mullite ceramics was explored. The results showed that the mullite phases were basically completely transformed for the sample sintered at 1600 °C. As the sintering temperature increased, a huge number of rod-like mullite grains were generated through the dissolution-precipitation mechanism. As a result, the apparent porosity was reduced, while the densification and compressive strength were improved. Furthermore, the impact of the pore geometry on the mechanical properties of the sample was also investigated. Among all the honeycomb mullite ceramics, the compressive strength of the sample with square pores reached a maximum value of approximately 206.71 MPa. In addition, the compressive strength of honeycomb mullite was simulated using SolidWorks software. The results were in good agreement with the experimental data. The fracture behavior of honeycomb mullite ceramics exhibited three stages, including the linear elastic, plateau, and densification regions and the fracture mechanism was mainly layer-by-layer fracture of the pore structure. [ABSTRACT FROM AUTHOR]

The potential benefits of biochar, a carbon-rich substance derived from biomass, for enhancing agricultural yield and soil health have drawn increasing interest. Nevertheless, owing to the lack of specialized studies, the role of its poly-spatial structure in the success of fostering plant growth remains unclear. This study aimed to assess the effects of various biochar pore shapes on tobacco growth and the underlying microbiological processes. Three pyrolysis temperatures (250 °C, 400 °C, and 550 °C) were used to produce biochar from tobacco stems, resulting in different pore structures (T3 > T2 > T1). We then used BET-specific surface area (BET), t.Plot micropore specific surface area (t.Plot), mesopore specific surface area (MSSA), specific pore volume (SPV), average pore size (AP), and mesopore pore volume (MPV) measurements to evaluate the effects of these biochars on tobacco growth and biomass accumulation, and microbial analyses were performed to investigate the underlying mechanisms. When applied to plants, biochar increased their growth compared to untreated controls. The most notable improvement in tobacco growth was observed in the biochar produced at 400 °C (T3), which possessed the largest and most advantageous pore structure among all treatments. Further studies demonstrated that biochars with greater specific surface areas (BET, t.Plot, and MSSA) positively altered the abundance of key microbial taxa (e.g., Stenotrophobacter, Ensifer, Claroideoglomus) and community composition, thereby encouraging plant development and biomass accumulation. Conversely, greater pore volumes (SPV, AP, and MPV) inhibited microbial activity and significantly affected growth and biomass accumulation. Structural equation modeling further demonstrated that the pore structure of biochar greatly affected plant growth by changing the relative abundance and community composition of soil microbes. Maximizing the benefits of biochar in stimulating plant growth and improving soil microbial communities depends on optimizing the material's pore structure, particularly by increasing the specific surface area. These findings will help expand the use of biochar in sustainable agriculture. [ABSTRACT FROM AUTHOR]

Using a mixture of TiH 2 , Al, B 4 C, and graphite powders with a molar ratio of 3+2 m/1.2/m/2-m (where m ranges from 0 to 0.25, with increments of 0.05), porous Ti 3 AlC 2 -TiB 2 composite ceramics were successfully synthesized through activated reaction sintering. The effect of B 4 C content on the phase composition, volumetric expansion, microstructure, and pore structure parameters (including pore size, porosity, and permeability) was systematically studied. When the molar ratio of B 4 C was less than 0.1, the volumetric expansion rate, average pore size, and permeability increased with the addition of B 4 C, reaching maximum values of −5.46 %, 2.23 μm, and 92.4 m3 m−2·10 kPa−1 h−1, respectively. Conversely, when the B 4 C molar ratio exceeded 0.1, the parameters related to the pore structure of the porous Ti 3 AlC 2 -TiB 2 composite ceramics decreased, with minimum values of −10.40 %, 1.46 μm, and 68 m3 m−2·10 kPa−1 h−1, respectively. In addition, the pore formation mechanism of the porous Ti 3 AlC 2 -TiB 2 composite ceramics was systematically explored. The revolution tendency of pores is related to the decomposition of TiH 2 , Kirkendall partial diffusion, diffusion between B and C, and the transition process of the final phase Ti 3 AlC 2 -TiB 2. This research work could provide a reference for the preparation of the MAX phase composite porous materials. [ABSTRACT FROM AUTHOR]

Liquid manipulation using tubular actuators finds diverse applications ranging from microfluidics, printing, liquid transfer to micro‐reactors. Achieving flexible and simple regulation of manipulated liquid droplets during transport is crucial for the tubular liquid actuators to perform complex and multiple functions, yet it remains challenging. Here, a facile tubular actuator for directional transport of various liquid droplets under the control of an externally applied magnetic field is presented. The surfaces of the actuator can be engineered with submillimeter‐sized through‐hole pores, which enables the liquid droplet to be easily modulated in the transport process. Furthermore, the liquid actuator with featured through‐hole pores is expanded to function as a switch in an integrated external electric circuit by magnetically controlling the motion of a conductive liquid droplet. This work develops a strategy for regulating liquid droplets in the tubular actuation systems, which may inspire ideas for designing functional liquid actuators with potential applications in microfluidics, microchemical reaction, liquid switch, and liquid robotics. [ABSTRACT FROM AUTHOR]

AbstractThe second interface of cementing refers to the interface formed by the formation and the cement sheath after cementing. The bonding strength of the second cementing interface is mainly generated through the interaction between the cement sheath and the formation. This study employs sandstone and limestone as experimental materials to investigate the influencing factors on the bonding strength of the second cementing interface by altering the water-cement ratio of the cement slurry system, adding ultrafine materials, and incorporating latex materials. In a progressive experimental approach, various types of cement slurries are selected, including pure cement slurry systems under different water-cement ratios (L1, L2), cement slurry systems with added nano-silica on the basis of pure cement systems (L3), and cement slurry systems with latex added (L4). The influence factors of the bonding strength of the second cementing interface of cement sheaths are explored through self-developed bonding strength evaluation molds and micro-characterization of the bonding interface. The results indicate that increasing the water-cement ratio or adding nano-silica can promote the generation of calcium silicate hydrate (C-S-H), resulting in higher early bonding strength but lower later strength under sandstone interfaces; the reaction of latex particles themselves to form a three-dimensional network structure can enhance the bonding strength. This research provides significant insights into the bonding laws of the second cementing interface and is of great importance to the cementing construction process. [ABSTRACT FROM AUTHOR]

Lotus-type porous copper was fabricated using a continuous casting method in pressurized hydrogen and nitrogen gas atmospheres. This study evaluates the effects of process parameters, such as the hydrogen ratio, total pressure, and transference velocity, on the resulting pore structure. A continuous casting process was developed to facilitate the mass production of lotus-type porous copper. To achieve the desired porosity and pore diameter for large-scale manufacturing, a systematic evaluation of the influence of each process parameter was conducted. Lotus-type porous copper was produced within a hydrogen ratio range of 25–50%, a transference velocity range of 30–90 mm∙min−1, and a total pressure range of 0.2–0.4 MPa. As a result, the porosity ranged from 36% to 55% and the pore size varied from 300 to 1500 µm, demonstrating a wide range of porosities and pore sizes. Through process optimization, it is possible to control the porosity and pore size. The hydrogen ratio and total pressure were found to primarily affect porosity, whereas the hydrogen ratio, transference velocity, and total pressure significantly influenced pore diameter. When considering these parameters together, porosity was most influenced by the hydrogen ratio, whereas the total pressure and transference velocity had a greater influence on pore diameter. Reducing the hydrogen ratio and increasing the transference velocity and total pressure reduced the pore diameter and porosity. This optimization of the continuous casting process enables the control of porosity and pore diameter, facilitating the production of lotus-type porous copper with the desired pore structures. [ABSTRACT FROM AUTHOR]

This study compared the physical properties and mechanical strength development of PCBAs with water, sealed, standard, and open ambient air curing over 28 days to find a suitable curing method for the production of phosphogypsum-based cold-bonded aggregates. The types and relative amounts of hydration products, microstructural morphology and pore structure parameters were characterized utilizing XRD, TGA, FTIR, SEM and nitrogen adsorption methods. According to the results, water curing leads to rapid increases in single aggregate strength, reaching 5.26 MPa at 7 d. The standard curing condition improved the 28 d mechanical strength of the aggregates by 19.3% over others by promoting the generation of hydration products and the transformation of the C-S-H gel to a higher degree of polymerization and by optimizing the pore structure. Further, PCBAs achieved an excellent solidification of phosphorus impurities under all four curing conditions. This work provides significant guidance for selecting an optimized PCBA curing method for industrial production. [ABSTRACT FROM AUTHOR]

The use of construction waste in creating concrete and mortar is an important process that not only offers economic benefits but also helps protect the environment by reducing waste in rural and urban areas. This experimental study aims to investigate the effect of adding crushed ceramic waste (CCW) and crushed brick waste (CBW) on the bulk density, workability, compressive and flexural strengths, water absorption and microstructural properties of dune sand mortar. To determine changes in porosity, the study uses the mercury intrusion porosimetry technique to measure porosity and pore size distribution. Scanning electron microscopy and energy-dispersive X-ray spectroscopy analyses are conducted to examine the microstructure and size of the voids using an electron microscope, and photographs of voids in the mortar matrix are taken. By replacing 15% of the sand with CCW and CBW, the compactness and mechanical strength of the dune sand mortar are enhanced, increasing the dynamic modulus of elasticity by around 29 and 26%, respectively. This is due to the pozzolanic activity of these residues, which mainly occur in the form of medium and small capillaries in all the mortars studied, reducing the diameter of the pores. [ABSTRACT FROM AUTHOR]

To explore the influence of surfactant concentration on the pore structure and permeability of coal samples during the chemical enhancement of coalbed methane production, different kinds and different concentrations of surfactants were added to the chemical solution, and the coal samples were soaked. Methods such as low-field nuclear magnetic resonance testing (NMR), fractal theory, permeability testing, surface tension testing, and contact angle testing were employed to analyze the variation patterns of coal sample pore structure, fractal characteristics, and permeability, and to explore the correlation between surface tension, contact angle, and the degree of pore structure development. The results show that the increase in total porosity of coal samples, the increase in the seepage pore porosity, the decrease in Dt, and the growth rate of permeability increase with the increase in surfactant concentration, and are negatively correlated with the surface tension of the solution and the contact angle of the coal-solution interface, while the decrease in Ds is not significantly correlated with surfactant concentration, surface tension, or contact angle. In terms of the erosion effect of a chemical solution on coal samples, the influence of contact angle is greater than that of surface tension, while surface tension has the greatest impact on the development of adsorption pores. By adding different surfactants, the surface tension of the chemical solution and the contact angle of the coal-solution interface can be controlled, further promoting the erosion of coal samples, which is of positive significance for the chemical enhancement of coalbed methane production. [ABSTRACT FROM AUTHOR]

This review comprehensively introduces and summarizes the roles of various pore structures and the research progress on different hierarchical porous carbon (HPC) materials used as capacitive deionization (CDI) electrodes・ The study also highlights the challenges faced by HPC as a CDI electrode material in practical applications, such as the limited development and utilization of environmentally friendly activators, the necessity for a deeper understanding of the structure-performance relationship between HPC and pseudocapacitive materials, and the lack of research on system design. Furthermore, it outlines the future development directions in the capacitive deionization field, offering valuable insights for researchers aiming to create environmentally friendly, low・carbon, and high-performance CDI electrode materials. [ABSTRACT FROM AUTHOR]

In-situ thermal upgrading is used to tune the pore system in low-maturity oil shales. We introduce fractal dimension (D), form factor (ff) and stochastic entropy (H) to quantify the heating-induced evolution of pore morphological complexity and azimuthal disorder and develop a model to estimate the impact on seepage capacity via permeability. Experiments are conducted under recreated in-situ temperatures and consider anisotropic properties-both parallel and perpendicular to bedding. Results indicate that azimuthal distribution of pores in the bedding-parallel direction are dispersed, while those in the bedding-perpendicular direction are concentrated. D values indicate that higher temperatures reduce the uniformity of the pore size distribution (PSD) in the bedding-parallel direction but narrow the PSD in the bedding-perpendicular direction. The greater ff (> 0.7) values in the bedding-parallel direction account for a large proportion, while the dominated in the bedding-perpendicular direction locates within 0.2e0.7, for all temperatures. The H value of the bedding-parallel sample remains stable at ~0.925 during heating, but gradually increases from 0.808 at 25 ℃ to 0.879 at 500 ℃ for the beddingperpendicular sample. Congruent with a mechanistic model, the permeability at 500 ℃ is elevated ~1.83 times (bedding-parallel) and ~6.08 times (bedding-perpendicular) relative to that at 25 -Cdconfirming the effectiveness of thermal treatment in potentially enhancing production from lowmaturity oil shales. [ABSTRACT FROM AUTHOR]

The cyclic hydraulic stimulation (CHS) has proven as a prospective technology for enhancing the permeability of unconventional formations such as coalbeds. However, the effects of CHS on the microstructure and gas sorption behavior of coal remain unclear. In this study, laboratory tests including the nuclear magnetic resonance (NMR), low-temperature nitrogen sorption (LTNS), and methane sorption isotherm measurement were conducted to explore changes in the pore structure and methane sorption characteristics caused by CHS on an anthracite coal from Qinshui Basin, China. The NMR and LTNS tests show that after CHS treatment, meso- and macro-pores tend to be enlarged, whereas micropores with larger sizes and transition-pores may be converted into smaller-sized micro-pores. After the coal samples treated with 1, 3, 5 and 7 hydraulic stimulation cycles, the total specific surface area (TSSA) decreased from 0.636 to 0.538, 0.516, 0.505, and 0.491 m²/g, respectively. Fractal analysis based on the NMR and LTNS results show that the surface fractal dimensions increase with the increase in the number of hydraulic stimulation cycles, while the volume fractal dimensions exhibit an opposite trend to the surface fractal dimensions, indicating that the pore surface roughness and pore structure connectivity are both increased after CHS treatment. Methane sorption isothermal measurements show that both the Langmuir volume and Langmuir pressure decrease significantly with the increase in the number of hydraulic stimulation cycles. The Langmuir volume and the Langmuir pressure decrease from 33.47 cm³/g and 0.205 MPa to 24.18 cm³/g and 0.176 MPa after the coal samples treated with 7 hydraulic stimulation cycles, respectively. The increments of Langmuir volume and Langmuir pressure are positively correlated with the increment of TSSA and negatively correlated with the increments of surface fractal dimensions. [ABSTRACT FROM AUTHOR]

Quantitative prediction of reservoir properties (e.g., gas saturation, porosity, and shale content) of tight reservoirs is of great significance for resource evaluation and well placements. However, the complex pore structures, poor pore connectivity, and uneven fluid distribution of tight sandstone reservoirs make the correlation between reservoir parameters and elastic properties more complicated and thus pose a major challenge in seismic reservoir characterization. We have developed a partially connected double porosity model to calculate elastic properties by considering the pore structure and connectivity, and to analyze these factors' influences on the elastic behaviors of tight sandstone reservoirs. The modeling results suggest that the bulk modulus is likely to be affected by the pore connectivity coefficient, while the shear modulus is sensitive to the volumetric fraction of stiff pores. By comparing the model predictions with the acoustic measurements of the dry and saturated quartz sandstone samples, the volumetric fraction of stiff pores and the pore connectivity coefficient can be determined. Based on the calibrated model, we have constructed a 3D rock physics template that accounts for the reservoir properties' impacts on the P-wave impedance, S-wave impedance, and density. The template combined with Bayesian inverse theory is used to quantify gas saturation, porosity, clay content, and their corresponding uncertainties from elastic parameters. The application of well-log and seismic data demonstrates that our 3D rock physics template-based probabilistic inversion approach performs well in predicting the spatial distribution of high-quality tight sandstone reservoirs in southwestern China. [ABSTRACT FROM AUTHOR]

The pore structure and mineral characteristics affect the accumulation and migration of hydrocarbons in shale, which determines the production capacity of shale oil. In this study, shale samples from the Chang 7 member of the Ordos Basin in China were selected to investigate the pore space characteristics, the effect of hydrocarbon accumulation on pore heterogeneity, and the hydrocarbon migration changes based on fractal theory, and a series of experiments were conducted involving X-ray diffraction (XRD), total organic carbon (TOC), Soxhlet extraction, and low-temperature nitrogen (N2) and carbon dioxide (CO2) adsorption. Then, the factors affecting extraction efficiency in shale pores were discussed. The interparticle pores contributed most to the accumulation of shale oil, and the organic matter (OM) pores contributed positively to the adsorption of hydrocarbons. The accumulation of hydrocarbons in the pore space did not increase the heterogeneity of the shale pore structure. The contents, states, and positions of hydrocarbons changed during the extraction process. Hydrocarbons were redistributed on the pore surface after Soxhlet extraction, and the heterogeneity of hydrocarbon adsorption and pore surface roughness were improved. Some heavy hydrocarbons and adsorbed components were pyrolyzed, resulting in the gradual escape of the adsorbed layer in the large pores. However, the free oil in the small pores diffused to the large pores and reaggregated on the surface, restoring a stable adsorption layer. The extraction rate was closely related to the pore throat structure and the wettability of mineral surfaces. The configuration between pores and throats had a crucial influence on the extraction rate. A high proportion of meso-pores, which effectively connect micro- and macro-pores, had a higher diffusion efficiency and a higher extraction rate. The OM pores with high energy adsorption were located in the micro-pores, and the shale oil existed in a dissolved state with high mobile capacity. The wettability of mineral surfaces affected the adsorption behavior during extraction, and strong oil wetting promoted hydrocarbon re-adsorption in clay minerals, so that the volume of micro-pores was smaller after extraction. [ABSTRACT FROM AUTHOR]

Shale gas is a prospective cleaner energy resource and the exploration and development of shale gas has made breakthroughs in many countries. Structure deformation is one of the main controlling factors of shale gas accumulation and enrichment in complex tectonic areas in southern China. In order to estimate the shale gas capacity of structurally deformed shale reservoirs, it is necessary to understand the systematic evolution of organic pores in the process of structural deformation. In particular, as the main storage space of high-over-mature marine shale reservoirs, the organic matter pore system directly affects the occurrence and migration of shale gas; however, there is a lack of systematic research on the fractal characteristics and deformation mechanism of organic pores under the background of different tectonic stresses. Therefore, to clarify the above issues, modular automated processing system (MAPS) scanning, low-pressure gas adsorption, quantitative evaluation of minerals by scanning (QEMSCAN), and focused ion beam scanning electron microscopy (FIB-SEM) were performed and interpreted with fractal and morphology analyses to investigate the deformation mechanisms and structure of organic pores from different tectonic units in Silurian Longmaxi shale. Results showed that in stress concentration areas such as around veins or high-angle fractures, the organic pore length-width ratio and the fractal dimension are higher, indicating that the pore is more obviously modified by stress. Under different tectonic backgrounds, the shale reservoir in Weiyuan suffered severe denudation and stronger tectonic compression during burial, which means that the organic pores are dominated by long strip pores and slit-shaped pores with high fractal dimension, while the pressure coefficient in Luzhou is high and the structural compression is weak, resulting in suborbicular pores and ink bottle pores with low fractal dimension. The porosity and permeability of different forms of organic pores are also obviously different; the connectivity of honeycomb pores with the smallest fractal dimension is the worst, that of suborbicular organic pores is medium, and that of long strip organic pores with the highest fractal dimension is the best. This study provides more mechanism discussion and case analysis for the microscopic heterogeneity of organic pores in shale reservoirs and also provides a new analysis perspective for the mechanism of shale gas productivity differences in different stress–strain environments. [ABSTRACT FROM AUTHOR]

Due to the influence of terrigenous debris, the internal pore structure of continental shale is highly heterogeneous, and the controlling factors are complex. This paper studies the structure and controlling factors of shale reservoirs in the first member of the Qingshankou Formation in the Southern Songliao Basin using core data and various analytical test data. The results show that the original deposition and subsequent diagenesis comprehensively determine the shale reservoirs' pore structure characteristics and evolution law. According to the severity of terrigenous debris, the shale reservoirs in the study area are divided into four categories and six subcategories of lithofacies. By comparing the characteristics of different shale lithofacies reservoirs, the results show that the lithofacies with a high brittle mineral content have more substantial anti-compaction effects, more primary pores to promote retention and a relatively high proportion of mesopores/macropores. Controlling the organic matter content when forming high-quality reservoirs leads to two possibilities. An excessive organic matter content will fill pores and reduce the pore pressure resistance. A moderate organic matter content will make the inorganic diagenesis and organic hydrocarbon generation processes interact, and the development of organic matter mainly affects the development of dissolution pores. The comprehensive results show that A3 (silty laminated felsic shale) reservoirs underwent the pore evolution process of "two drops and two rises" of compaction, cementation and pore reduction, dissolution and pore increase, and organic matter cracking and pore increase, and they are the most favourable lithofacies of the shale reservoirs in the study area. [ABSTRACT FROM AUTHOR]

Rock pores crack and expand subjected to freeze-thaw cycles, resulting in the reduction of their physical and mechanical properties, it is necessary to study its evolution and deterioration mechanism. However, the majority of existing studies employ a singular pore testing methodology, and neglecting the impact of the thawing process on frost heave damage in rocks. To address this, this study employs a combination of non-destructive testing techniques, including nuclear magnetic resonance (NMR) and computed tomography (CT) scanning, to comprehensively analyze the evolution of pores during freeze-thaw cycles. Investigating the migration and redistribution of pore water and its effect on frost heave damage in sandstone during the freeze-thaw process. Finally, the study examines the mechanisms of pores frost heave initiation and propagation in sandstone during freeze-thaw cycles. The results demonstrate that freeze-thaw cycles result in an expansion of pore volume at all scales within the samples. However, the degree of expansion varies, with macropores, mesopores, and micropores exhibiting a less pronounced increase in sequence. During the freeze-thaw process, water in sandstone pores redistributes, moving from larger to smaller pores. The saturation of water increases in micropores, but decreases in mesopores and macropores, thereby rendering micropores more susceptible to frost heave initiation in subsequent freeze-thaw cycles. With repeated freeze-thaw, the expansion of rock pores will continue in the direction of the lowest tensile strength, eventually forming macroscopic cracks. This study provides valuable insights into the mechanisms of freeze-thaw disaster genesis in rock masses. [ABSTRACT FROM AUTHOR]

Under the influence of geostress, the thick hard sandstone roof layer at the upper end of the mining area is prone to faults, rockbursts, and sudden collapses during deep coal mining. Blasting top-cutting and depressurization technology centered on over-the-top deep hole blasting is an important method for this type of dynamic disaster control. To characterize the pore structure of sandstone damaged by blast loads and the change in energy dissipation in different pressure environments, specimens with different degrees of blasting damage were measured via nuclear magnetic resonance (NMR) spectroscopy. A triaxial test loading device was used to carry out compression tests on undamaged, vibration-damaged, and blast-damaged specimens under different pressures. The effects of blast load and confining pressure on the porosity, pore structure, energy dissipation, and fracture morphology characteristics of sandstone specimens were analyzed. (1) The T2 spectral curves of the sandstone specimens were all bimodal, and the signal intensity of the main peak was much greater than that of the secondary peak. The peak T2 spectrum curves of the blast-damaged specimens and vibration-damaged specimens were 1.21 and 1.14 times greater than those of the undamaged specimens, respectively, and the mean values of the peak relative area were 1.11 and 1.20 times greater than those of the undamaged specimens, respectively. The number of internal pores in the specimens increased significantly after blast loading. (2) The pore structure distributions in the sandstone specimens were dominated by the proportions of micropores and small holes. The blast load changed the internal pore ratio structure of the specimen, transformed the small holes into medium holes and large holes, and increased the porosity of the specimen. (3) Blast load damage could reduce the energy absorption and energy storage effects of sandstone specimens and weaken roof sandstone and reduce the stress concentration. Furthermore, the impact of the blasting damage area was greater than that of the vibration damage area. (4) With increasing confining pressure, the fracture degree of the specimen first decreased and then increased. Due to the high-energy storage abilities of the undamaged specimens, the macroscopic rupture degrees of the undamaged specimens were greater than those of the specimens damaged by vibration and blasting. The blasting load will cause damage to the roof sandstone to achieve the effect of pressure relief, so as to reduce the occurrence of geological disasters such as roof fault and rock burst. [ABSTRACT FROM AUTHOR]

Fly ash (FA) contents and water-binder ratio (w/b) are the important factors influencing the mechanical characteristics of cement-based materials, meanwhile the porous structure of material plays a vital role. The compressive strength and water permeability of cement-based samples with high-volume FA contents (0%, 30%, 40%) and different w/b (0.3, 0.4, 0.5) were measured. The results demonstrated that higher FA contents or greater w/b led to lower compressive strength and higher water permeability at an early stage. The pore structure features of samples were obtained using mercury intrusion porosimetry and low-temperature nitrogen gas adsorption (LT-NGA). The pore size distributions (PSDs) and the matrix compressibility in cementitious materials were also analyzed, with the compression coefficient KC ranging from 11.919 to 1.249 × 10−4 MPa−1. Increasing the FA content and reducing the w/b resulted in an optimized pore structure of the samples, characterized by changing the main pore type from mesopores (10–50 nm) to micropores (< 10 nm). The pores and fractures in the samples also had distinct multifractal characteristics. The strongest negative correlation between the compressive strength and the width of the multifractal generalized spectrum was proved by Pearson correlation analysis, and the correlation coefficient (ρ) was − 0.93. Furthermore, the water permeability had the strongest positive correlation with porosity, with ρ of 0.91. The content of macropores (50–10 μm) had greater influence on its macroscopic properties. The dense structure accompanied by homogeneous PSDs is advantageous for enhancing the strength and anti-permeability properties of cement-based materials. [ABSTRACT FROM AUTHOR]

The injection of CO2 into deep, unmineable coal seams is an effective strategy for reducing greenhouse gas emissions. At depths greater than 800 m, the carbon dioxide transitions to the supercritical state (Sc-CO2). This study investigated the complex interactions between Sc-CO2 and coal, which substantially affected the pore structure, mineralogy, and permeability of the coal. We used low-pressure nitrogen gas adsorption (LP-N2GA) to assess the impact of Sc-CO2 on the pore characteristics of the coal. X-ray diffraction (XRD) was also used to determine the causal factors. We performed comparative triaxial permeability tests before and after Sc-CO2 exposure to evaluate the changes in permeability for various coal types. Our findings suggested that Sc-CO2 exposure markedly increased the complexity of the coal pore structure, which in turn affects coal-rock permeability. Specifically, a 10-day exposure period resulted in considerable increases of 43.5% and 50.9% in the pore volume and the specific surface area, respectively, along with a slight increase of 0.01 nm in the average pore diameter. Furthermore, there were notable decreases in the contents of minerals such as kaolinite, calcite, and pyrite, with decreases of 1.5%, 2.8%, and 2.2%, respectively, whereas the quartz content increased by 3%, indicating that significant mineral dissolution influenced the pore structure. A significant positive correlation was observed between the loss of coal mass and the increase in permeability. The effects of Sc-CO2 were most pronounced in coals with low permeabilities, particularly during the initial phase of saturation. Subsequent saturation cycles and prolonged exposure resulted in a reduced rate for permeability enhancement, which eventually reached a plateau. This study underscores the critical role of Sc-CO2 in long-term geological CO2 storage and improved efficiency for coalbed methane production. [ABSTRACT FROM AUTHOR]

Utilizing recycled concrete aggregate (RCA) is a countermeasure to address the scarcity of landfills and the depletion of natural aggregates. Surface modification techniques have been proposed and implemented to improve the properties of RCA; however, to our best knowledge, few investigations on improving RCA under various pozzolanic slurry concentrations and extended soaking durations have been done. This study comprehensively assessed the properties and microstructure of low-strength RCA treated with cement–fly ash slurry with different concentrations and soaking durations. The purposes of this study were not only to provide the optimal slurry concentration and treatment duration but also to explore the enhancement mechanism of RCA under various treatment conditions. The RCA from concrete with a low-strength grade of 20 MPa was soaked in cement–fly ash slurry at low and high concentrations (i.e., 30% and 70% by mass of RCA, respectively) for 24 and 72 h. The physical and mechanical properties of RCA before and after treatment were evaluated through water absorption and crushing value measurements, respectively. Additionally, the pore structure, Ca(OH)2 contents, surface morphology, and phase compositions of RCAs were evaluated through a mercury intrusion porosimetry test, thermal gravimetric differential thermal analysis (TG-DTA), scanning electron microscopy, and X-ray diffraction (XRD) analyses, respectively. The water absorption of treated RCA reduced by 9.2%–37.9%, whereas the crushing value decreased by 8.6%–26.9% compared with the untreated RCA. The TG-DTA results indicated a 22.3%–43.8% increase in the Ca(OH)2 content of treated RCA. The XRD analysis depicted a higher ettringite (AFt) peak in all treated RCA samples compared with the untreated sample. For both concentrations, with a 24 h treatment, the slurry infiltration effect was clearly observable, whereas the 72 h treatment resulted in the formation of a pozzolanic coating layer on the RCA surface. In conclusion, the optimal slurry concentration and soaking duration were 70% and 72 h, respectively. [ABSTRACT FROM AUTHOR]

The mechanism of steel corrosion in recycled brick powder (RBP)–incorporated concrete remains unclear considering the potential utilization of active RBP for low-carbon design in engineering structures. This study aimed to point the influence of RBP on the corrosion behavior of reinforced concrete under the action of chloride or carbonation. Mortar containing RBP (RBPM) was used in this study to concentrate on the effect of RBP and limit the effect of coarse aggregate. The mechanical, chloride penetration, and carbonation properties of RBPM were first investigated. Then the steel corrosion in reinforced RBPM under the action of chloride or carbonation was evaluated by different electrochemical tests. The underlying mechanisms were elucidated by the chemical composition, pH value, and pore structures of RBPM. The results showed that the compressive strength of mortar decreased 21.7% when 30% RBP was used. The addition of RBP reduced the chloride ion permeability but increased the carbonation depth of RBPM. The corrosion caused by chloride penetration in reinforced RBPM was reduced with a higher corrosion potential and lower corrosion current density, which resulted in an approximately 20% lower mass loss with 30% RBP. However, compared with normal concrete, RBPM suffered an increase in corrosion after carbonation. The corrosion current density and mass loss were greatly increased with increasing the RBP content. When the replacement ratio of RBP was 20%, the mortar was in low corrosion state after carbonation curing for 56 days. This was because a combination of the pozzolanic, filling, and nucleation effect of RBP contributed to a 16.28% lower cumulative pore volume and lower pH of RBPM. Considering the effect of RBP on the mechanical properties and corrosion of reinforce mortar, this study suggested a utilization ratio of 20% for RBP in the practical project. [ABSTRACT FROM AUTHOR]

Influenced by the cyclic fluctuation of reservoir water levels and rainfall, the rocks of reservoir bank slopes have been subjected to alternating wet and dry environments for a long time. This leads to their deterioration and damage, posing a great threat to the stability of the bank slopes. This study investigates the red sandstone of the Baihetan hydropower station as the research object, and the structural deterioration of the red sandstone under wetting-drying cycles of sodium sulfate salt solution were investigated by carrying out wetting-drying cycles test, CT scanning test, digital core modeling and seepage simulation. The results show that the mass loss rate (a) and permeability (k) of the red sandstone increase exponentially with the number of cycles (N). The total porosity, effective porosity, and effective porosity ratio initially decrease and then increase with N. The study suggests that the structural deterioration of the red sandstone under wetting-drying cycles in the salt solution results from the combined effect of dissolution and salt crystallization. In the early stages, structural damage is mainly due to calcite, plagioclase feldspar and other minerals in solution dissolution. In the middle stages, the rocks undergoes damage from both salt crystallization and dissolution. In the later stages, the effect of salt crystallization is gradually weakened and rock dissolution becomes the dominant factor causing rock damage again. The results of the study provide an important theoretical basis for the long-term stability evaluation of reservoir slopes at the Baihetan hydropower station. [ABSTRACT FROM AUTHOR]

Activated carbon paper is a type of porous carbon material with a highly developed pore structure and a large specific surface area. It finds extensive applications in adsorption, complexation, and catalyst support. To prepare high-performance activated carbon paper, this study investigates the changes in performance and structure of Poly(p-phenylene terephthalamide) (PPTA) paper under CO2 activation, ZnCl2 activation, H3PO4 activation, and NaOH activation conditions. The research reveals that carbon paper after CO2 activation has a certain tensile strength (0.36 MPa), while chemically activated carbon paper lacks tensile strength. Incorporating 15% carbon fiber (CF) into PPTA paper increases the tensile stress (1.26 MPa) and tensile strain (4.18%) of the activated carbon paper. NaOH-activated carbon paper has the highest specific surface area (1321.6 m2/g), the most disordered carbon structure (ID/IG = 1.22), the lowest carbon yield (23.9%), and a pore rate 4.16% higher than that of CO2-activated samples. The activated carbon paper prepared by ZnCl2 activation has the highest content of C = N bonds, with the nitrogen content of pyridine increasing by 31.8% compared to CO2 activation. This indicates that ZnCl2 protects the N elements in PPTA paper during the activation process, preventing their decomposition during carbonization. The activated carbon paper prepared by H3PO4 activation has the lowest electrical conductivity (1.62 S/cm). [ABSTRACT FROM AUTHOR]

Mercury intrusion porosimetry (MIP) is widely used for coal pore structure characterization, however, the matrix compressibility (MC) can lead to overestimated measurement results. Determination of MC is crucial for revealing the influence of pore structure on coalbed methane (CBM) flow behavior. In this study, MIP and low temperature N2 adsorption (LT-N2A) were conducted on 15 coal samples from major coal-producing regions in Northern China. The MIP data were corrected using MC theory, and the effects of coal rank and pore structure on coal MC were analyzed. The influence of MC on fractal dimension was elucidated, and the sensitivity of three fractal models to MC was effectively evaluated. Finally, the impact of MC on the coalbed methane (CBM) exploitation was discussed. The results show that low-rank coals have higher MC than medium/high-rank coals, and the MC coefficient follows a cubic polynomial relationship with coal rank, with two inflection points located at 1.4–2.5%, respectively. Micropores and transition pores are the main contributors to MC, for corrected data, the pore volume of both types of pores decreases significantly. The corrected pore size distribution exhibits better agreement with the LT-N2A measurement results, particularly in peak position and size for pores between 5 and 50 nm. This suggests the potential of corrected MIP data to supersede the combined use of MIP and LT-N2A data. MC can lead to overestimation of the fractal dimension, with the thermodynamic model showing the lowest sensitivity to MC. After the microfractures in medium/high-rank coal are greatly compressed, the compressional deformation of micropores and transition pores begins to have a significant impact on the CBM transport. The research results are of great significance for deeply understanding the mechanism of CBM transport. [ABSTRACT FROM AUTHOR]

This research systematically investigates the influence of raw material particle size and calcium content on the geopolymerization process to gain insight into the physical and mechanical properties of geopolymer gels, including setting time, fluidity, pore structure, compressive strength, and leaching characteristics of encapsulated Cr3+ heavy metal ions. Utilizing a diverse range of particle sizes of metakaolin (MK; 3.75, 7.5, and 12 µm) and fly ash (FA; 18, 45, and 75 µm), along with varied calcium levels, this study assesses the dual impact of these factors on the final properties of both metakaolin- and fly-ash-based geopolymers. Employing sophisticated analytical techniques such as Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and Nuclear Magnetic Resonance (NMR), the research meticulously documents alterations in chemical bonding, micro-morphology, and pore structures. Key findings reveal that reducing the size of MK and FA particles to 3.75 and 18 µm, respectively, enhances the compressive strength of their matrices by 128.37 and 297.58%, respectively, compared to their original values (63.59 and 33.87 MPa, respectively) at larger particle sizes. While smaller particle sizes significantly bolster compressive strength, they adversely affect slurry flow and reduce the leaching rates of Cr3+ from MK- and FA-based matrices, reaching 0.42 and 0.75 mg/L at 3.75 and 18 µm, respectively. Conversely, increased calcium content markedly enhances setting times and contributes to the formation of dense microstructures through the production of calcium aluminate silicate hydrate (C-A-S-H) gels, thus improving the overall curing performance and durability of the materials. These insights underline the importance of fine-tuning particle size and calcium content to optimize geopolymer formulations, offering substantial benefits for varied engineering applications and promoting more sustainable construction practices. [ABSTRACT FROM AUTHOR]

We focused on the efflorescence induced microstructural evolution of ettringite-rich systems prepared with calcium aluminate cement (CAC) and anhydrite. The effects of anhydrite on the visible efflorescence, and the corresponding capillary absorption of CAC-anhydrite mortars were revealed. The composition and microstructure of efflorescence-causing substances were investigated by optical microscope, in-situ Raman spectroscopy, scanning electron microscope, energy dispersive spectrometer, thermogravimetric analysis, and differential scanning calorimetry, at multi-scales. Results indicate that, besides the calcium carbonate, ettringite is another main component of efflorescence-causing substances. Compared with the neat CAC mortars, the addition of anhydrite has a significant effect on the degree of efflorescence by acting on the composition of hydration products and pore structure. In addition, methods are proposed for the prevention of efflorescence of CAC-anhydrite binary system. [ABSTRACT FROM AUTHOR]

To improve the efficiency of coalbed methane and recoverability of reservoirs, enhanced fracturing technology is usually required to improve the low porosity and permeability status of coal reservoirs. As a feasible method for strengthening permeability, microwave–LN2 freeze–thaw (MLFT) cycles modify the microscopic pore structure of coal through the coupled effect of temperature stress changes, phase change expansion, and fatigue damage. 1H nuclear magnetic resonance combined with fractal dimension theory was used to characterize quantitatively the pore system and geometric features of coal. The geometric fractal model constructed using the T2 spectrum indicates that the fractal dimensions Dp and De have high fitting accuracy, demonstrating that percolation and effective pores exhibit good fractal characteristics. Dp and De are correlated negatively and positively, respectively, with the cyclic parameters. The relevance analysis shows that the NMR fractal method can reflect the pore–fracture heterogeneity of coal, which has a significant effect on the percentage of fluid migration space. This study reveals that MLFT cycles have significant enhancement effects on promoting the extension of multi-type pores structures within the coal matrix, as well as the connectivity and permeability of cracks. [ABSTRACT FROM AUTHOR]

In China, significant progress has been made in the exploration and development of coalbed methane (CBM) in medium- to high-rank coals. However, the exploration and development potential of CBM in low-rank coals in the Zhalainuoer coalfield is unknown. In this study, various testing methods were utilized, including low temperature N2/CO2 adsorption, field emission scanning electron microscopy, and nuclear magnetic resonance, to investigate the pore structure characteristics of low-rank coals in the Zhalainuoer coalfield, so as to further evaluate the occurrence space of CBM therein. The results revealed that the prevalent pore types in the low-rank coals were "ink bottle" shaped pores and semi-closed pores, and micropores provide the main specific surface area (SSA) and total pore volume (TPV). Moreover, there is no significant correlation between vitrinite content and fractal dimension, while pore SSA and TPV are correlated positively with D1 but negatively with D2. The coalification degree significantly impacts the pore characteristics of the coal reservoirs. With coalification degree increasing, the SSA and TPV of micropores and transition pores generally exhibited a pattern of initially decreasing and then increasing. These research findings establish a theoretical foundation for the exploration and development of CBM in the Zhalainuoer coalfield. [ABSTRACT FROM AUTHOR]

As a crucial factor that influences the hydraulic fracturing effectiveness of coal seams, fracturing fluids have garnered increasing attention. Among them, acid fracturing fluids have demonstrated positive impact on the pore transformation of coal, but high-strength acid fracturing fluids can cause corrosion damage to mechanical equipment. In this study, we employed acetic acid to formulate four types of weak acid fracturing fluids with varying concentrations and conducted soaking experiments. We analyzed the changes in the physical and chemical structure of coal samples before and after treatment using Fourier-transform infrared spectroscopy and X-ray diffraction analysis. The changes in the pore structure of coal samples before and after treatment were characterized by nitrogen adsorption and scanning electron microscopy. Our findings indicate the following: (1) The effects of different concentrations of acetic acid fracturing fluid on functional groups and microcrystalline structure vary. The 5% concentration fracturing fluid had the most significant impact on the organic structure of coal samples, with decreases in the area of hydroxyl structure, aliphatic structure, and oxygen-containing structure of 2.97%, 1.37%, and 0.68%, respectively. The 6% concentration fracturing fluid had the most significant impact on crystal structure, leading to a high degree of recrystallization and a fragile crystal network structure. (2) Fracturing fluids with concentrations below 7% can increase the number of mesopores and simplify the pore structure, while concentrations above 7% can lead to an increase in micropores and a more complex pore structure. (3) After the action of fracturing fluid, carbonate minerals are dissolved, and the pores of coal samples increase. However, excessively high concentrations of acetic acid fracturing fluid can facilitate shedding of mineral particles and block some pore channels, worsening the connectivity between pores. (4) The octadecylamine acetate formed by the combination of octadecylamine and acetic acid develops as a partial film on the surface of a coal body, reducing the roughness of the fracture surface and facilitating the flow of the fracturing fluid. Our findings provide theoretical support for the preparation and selection of weak acid fracturing fluids. [ABSTRACT FROM AUTHOR]

Land‐use conversion profoundly influences the soil pore structure, consequently modifying the soil functions. Investigating the variation of multiscale soil pore structure and their associated functions following land‐use change is critical for evaluating land management strategies. However, this topic has not yet been extensively explored in recent studies. In this study, the pore structure of soil following land‐use conversion was quantitatively investigated by multiscale X‐ray tomography. Intact soil aggregates and undisturbed soil cores were collected from paddy fields (PF) and from vegetable fields were converted from paddy fields for 5 years (VF‐5), 13 years (VF‐13), and 20 years (VF‐20), respectively. Results revealed that the connected porosity of both aggregates and soil cores was significantly increased after land‐use conversion. The isolated porosity of soil aggregates increased, while, conversely, it decreased for soil cores. The variance in pore structure was attributed to the development of new pores, including channels created by vegetable roots, fissures, earthworm holes, and packing pores resulting from the decomposition of soil organic matter and the rearrangement of soil particles. The altered pore structure influenced the soil exchangeability and reservation ability. For aggregates, the isolated porosity of PF and VF‐5 accounted for over 70% of the total imaged porosity. These aggregates displayed a larger water and carbon reservation ability, but limited exchangeability of air, water, and nutrients. The isolated porosity of VF‐13 and VF‐20 aggregates accounted for approximately 50% of the total imaged porosity, suggesting they could effectively balance the exchange and storage of air, water, and nutrients. As for soil cores, isolated pores became negligible (<0.2%) following land‐use conversion, leading to the emergence of a drainable pore system suitable for vegetable plantation. These findings offer insights into the development of pore structures and the prediction of soil function variations at multiple scales, both of which are crucial for optimizing soil management protocols. [ABSTRACT FROM AUTHOR]

Copyright of Natural Gas Geoscience is the property of Natural Gas Geoscience and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Special Oil & Gas Reservoirs is the property of Special Oil & Gas Reservoirs Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Materiae Compositae Sinica is the property of Acta Materiea Compositae Sinica Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Solid waste recycling plays a crucial role in environmental protection and energy conservation. This study explores the impact of the modulus of the alkaline activator on the dry density, water absorption rate, thermal conductivity, electromagnetic wave absorption, and compressive and flexural strength of rice husk ash (RHA)‐foamed composites. Additionally, the foamed composite's micropore structure and hydration characteristics were characterized. For the first time, the study reveals the correlation between the pore structure, hydration products, and hardening properties of alkali‐activated RHA‐foamed composites. The study found that decreasing the modulus of the alkaline activator increased the amount of OH− ions available in the gel, and the number of micropores (r ≤ .1 µm) in the foamed composites increased from 7.1903% to 21.3156%. This resulted in the refinement of pore sizes and optimization of heat transfer paths. Meanwhile, increasing the C–S–H gel composition in the hydrated products improved its compressive and flexural strength. When the alkali modulus reaches 1, 28 days foamed composites display compressive strength of 8.33 MPa and thermal conductivity of .1404 W/(m·K). Furthermore, the superior pore structure improved the electromagnetic wave absorption of the foamed composites, yielding a reflection loss value of −12.02 dB. [ABSTRACT FROM AUTHOR]

Coal gasification fine slag (CGFS) is a large solid waste in the field of coal chemical industry, and its land occupation and environmental pollution caused by stockpiling and landfill make its comprehensive utilization imminent. The composition and structure of CGFS is the basis of its resource utilization, particle size classification and density classification is the important means to achieve the separation and enrichment of components in CGFS, while there are significant differences in the properties of CGFS in different particle size and different density fractions. Therefore, a CGFS sample from Shaanxi, China was used as an example in this paper, and X-ray diffraction analyzer (XRD), X-ray fluorescence spectrometry (XRF), Fourier Transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), and low-temperature N2 adsorption tester were applied to comprehensively analyze the compositional and structural properties of the raw as well as the graded (both size-graded and density-graded) samples. The results show that the proximate composition, mineral composition, elemental composition, surface functional groups, apparent morphology, and pore structure show a good regularity with the particle size and density of the samples. Meanwhile, these properties and their variations with particle size and density were analyzed for their implication in the separation of components and resource utilizations of CGFS. The findings of this study provide ideas and data support for large-scale dissipation and high value-added disposal of CGFS. [ABSTRACT FROM AUTHOR]

In this paper, the effect of basalt fiber (BF) on the frost resistance of concrete under different curing conditions was investigated, and its frost resistance mechanism was analyzed. Three different curing conditions (normal curing, short-term curing, and seawater curing) were adopted, and concrete with different BF volume contents was designed. Freeze-thaw (FT) tests were carried out using the rapid freezing method to test the frost resistance of basalt fiber reinforced concrete (BFRC). Additionally, the mass loss rate (MLR), relative dynamic modulus of elasticity (RDME) change, and compressive strength reduction of specimens during the freeze-thaw cycles (FTCs) were evaluated. The results show that when the BF content is 0.15%, under normal curing, short-term curing, and seawater curing conditions, the residual compressive strength of BFRC after FTCs was increased by 5.4%, 28.1%, and 30.9%, respectively, compared to plain concrete. By incorporating BF into concrete, the development of microcracks can be effectively retarded, and damage generation during FTCs can be reduced. In addition, the microscopic morphological characteristics and pore structure characteristics of concrete further elucidate the frost resistance mechanism of BFRC from a microscopic perspective. [ABSTRACT FROM AUTHOR]