Search

The question of whether charge-changing interactions can be used to probe point-proton radii of nuclei remains unanswered. Charge-changing cross sections, σcc, were systematically investigated using stable and unstable nuclear beams of intermediateenergy. The ratios of the experimental σcc values to the calculated ones obtained from a phenomenological Glauber-type model analysis are found to be nearly constant in a broad range of Z/N for light neutron-rich nuclei. This enables the determination of density distributions, i.e., the radii of protons tightly bound in nuclei. To test the applicability of the present method to all nuclei in the nuclear chart, extensive measurements were performed for medium-mass nuclei ranging from Z = 18 to 32. The present study suggests the potential capability of a new experimental approach for exploring exotic nuclei.

The inelastic (IE) component of the reaction product, which is produced through charge-exchange reactions at relativistic energies of E ~ 1 GeV/u, is one of the hopeful probes used to study the nuclear medium effect on Δ excitation. In the present study, the longitudinal-momentum (PL) distribution of 56Co, produced by bombarding C-and CH2-target with a primary beam of 56Fe at E=500 MeV/u, was observed by means of the spectrometer at HIMAC facility. The IE peak of 56Co, produced from H and C targets, was successfully observed in energy transfer spectrum. The behaviors of the IE peaks are consistent with those observed in previous experiments. A remarkable reduction of the energy transfer for the IE process was also observed with C target compared with H target. The present results have shown the feasibility to investigate the energy transfer in charge-exchange reactions for heavy reaction system at the energy down to 500 MeV/u.

Interaction cross sections (σI) for 22−35Na isotopes from the stability line to the vicinity of the neutron drip line have been measured at around 240 MeV/nucleon. The σI for 33−35Na were measured for the first time. Enhancement in cross sections is clearly observed from the systematics for stable nuclei, for isotopes with large mass numbers. From the known values of the nuclear-deformation parameters β2 of 22−31Na, these enhancement can be mainly ascribed to the nuclear deformation. Large enhancement in heavier isotopes suggest that these nuclei are strongly deformed. The root-mean-square (RMS) nuclear matter radii were deduced from the σI by using Glauber-type calculation. Furthermore, a monotonic growth of the neutron-skin thickness has been deduced with increasing neutron number for Na isotopes.

Reaction cross sections (σR) for 24–38Mg on C targets at the energies of around 240 MeV/nucleon have been measured precisely at RIBF, RIKEN for the purpose of obtaining the crucial information on the changes of nuclear structure in unstable nuclei, especially around the so-called “island of inversion” region. In the island of inversion region, which includes neutron-rich Ne, Na, and Mg isotopes, the vanishing of the N = 20 magic number for neutrons have been discussed along with nuclear deformation. The present result suggest deformation features of Mg isotopes and shows a large cross section of weakly-bound nucleus 37Mg, which could be caused by a neutron halo formation.

The differential cross sections of the 9Be + α inelastic scattering at 30 MeV were measured at the tandem of Tsukuba University. All the known states of 9Be up to energies ~ 12 MeV were observed and decomposed into three rotational bands, each of them having a cluster structure consisting of a 8Be core plus a valence neutron in one of the sub-shells: p3/2−, s1/2+ and p1/2−. Existence of a neutron halo in the positive parity states was confirmed.

In the framework of the program for the construction of 1 MeV–16 MW negative neutral beam injector (NNBI) for ITER, a research and development activity on voltage holding in vacuum has been initiated since 2009, aimed at supporting the design, construction, and development of the NNBI accelerator. For this purpose, the voltage holding prediction model (VHPM) previously developed has been updated. In the VHPM, the effect of the anodic electric field and the cathodic electric field on the probability of breakdown is evaluated by means of two exponents: $\alpha $ and $\gamma $. On the basis of the experimental results from different test stands and of detailed 3-D numerical simulation of the corresponding electric-field configurations, the predictions of the VHPM numerical code have been benchmarked. New exponents, $\alpha $ and $\gamma $ , have been proposed to obtain a more precise location of the weak point of the system and a better prediction of the maximum withstanding dc voltage in high vacuum. [ABSTRACT FROM AUTHOR]

In order to realize negative ion sources and accelerators to be applicable to International Thermonuclear Experimental Reactor and JT-60 Super Advanced, a large cesium (Cs)-seeded negative ion source and a multi-aperture and multi-stage electric acceleration have been developed at Japan Atomic Energy Agency (JAEA). Long pulse production and acceleration of the negative ion beams have been independently carried out. The long pulse production of the high current beams has achieved 100 s at the beam current of 15 A by modifying the JT-60 negative ion source. The pulse duration time is increased three times longer than that before the modification. As for the acceleration, a pulse duration time has been also extended two orders of magnitudes from 0.4 s to 60 s. The developments of the negative ion source and acceleration at JAEA are well in progress towards the realization of the negative ion sources and accelerators for fusion applications. [ABSTRACT FROM AUTHOR]

Design techniques for the vacuum insulation have been developed in order to realize a reliable voltage holding capability of multi-aperture multi-grid (MAMuG) accelerators for fusion application. In this method, the nested multi-stage configuration of the MAMuG accelerator can be uniquely designed to satisfy the target voltage within given boundary conditions. The evaluation of the voltage holding capabilities of each acceleration stages was based on the previous experimental results about the area effect and the multi-aperture effect. Since the multi-grid effectwas found to be the extension of the area effect by the total facing area this time, the total voltage holding capability of the multi-stage can be estimated from that per single stage by assuming the stage with the highest electric field, the total facing area, and the total apertures. By applying these consideration, the analysis on the 3-stage MAMuG accelerator for JT-60SA agreed well with the past gap-scan experiments with an accuracy of less than 10% variation, which demonstrated the high reliability to design MAMuG accelerators and also multistage high voltage bushings. [ABSTRACT FROM AUTHOR]

The level structure of 30P up to 8.25 MeV was investigated via in-beam &#947-ray spectroscopy using the 28Si(³He,p&#947)30P reaction at 9 MeV at the University of Tsukuba Tandem Accelerator Complex in Japan. An energy level scheme was deduced from &#947-&#947 coincidence measurements. 47 new transitions have been observed from the previously known states (mostly resonances), thereby reducing the uncertainties in the excitation energies of 17 states from 3 to 10 keV to values of < 1 keV. Furthermore, spin assignments based on measurements of &#947-ray angular distributions and &#947-&#947 directional correlation of oriented nuclei (DCO ratios) were made for several observed levels of 30P. [ABSTRACT FROM AUTHOR]

Infection control of dental stone cast is an important issue. Ozone is effective for disinfection against microorganisms and inactivation of viruses. However, there is little information regarding the use of ozone. We prepared 4 types of gypsum specimens and 3 types of disinfectants (4-5 ppm Ozonated water [OZW], 2% glutaraldehyde [GL], and 1% sodium hypochlorite [SH]). Gypsum specimens were immersed in each disinfectant for 5 and 10 min, and surface roughness was then examined using laser scanning microscopy. Surface microstructure was investigated using scanning electron microscopy. Immersion of gypsum specimens in SH, GL, and OZW increased the surface roughness to a maximum of 1.04, 0.37, and 0.30 μm, respectively, based on the difference between the average values of surface roughness before and after the disinfection procedure. The effects of OZW and GL were comparable. OZW is useful as a candidate for relatively safe disinfection of material for dental stone casts.

To understand the physics of the negative ion extraction/acceleration, the heat load density profile on the acceleration grid has been firstly measured in the ITER prototype accelerator where the negative ions are accelerated to 1 MeV with five acceleration stages. In order to clarify the profile, the peripheries around the apertures on the acceleration grid were separated into thermally insulated 34 blocks with thermocouples. The spatial resolution is as low as 3 mm and small enough to measure the tail of the beam profile with a beam diameter of ∼16 mm. It was found that there were two peaks of heat load density around the aperture. These two peaks were also clarified to be caused by the intercepted negative ions and secondary electrons from detailed investigation by changing the beam optics and gas density profile. This is the first experimental result, which is useful to understand the trajectories of these particles.

Quality control of mesenchymal stem cells is an important step before their clinical use in regenerative therapy. Among various characteristics of mesenchymal stem cells, reproducibility of population compositions should be analyzed according to characteristics, such as stem cell contents and differentiation stages. Such characterization may be possible by assessing the expression of several surface markers. Here we report our attempts to utilize antibody arrays for analyzing surface markers expressed in mesenchymal stem cell populations in a high-throughput manner. Antibody arrays were fabricated using a glass plate on which a micropatterned alkanethiol monolayer was formed. Various antibodies against surface markers including CD11b, CD31, CD44, CD45, CD51, CD73, CD90, CD105, and CD254 were covalently immobilized on the micropatterned surface in an array format to obtain an antibody array. To examine the feasibility of the array, cell binding assays were performed on the array using a mouse mesenchymal stem cell line. Our results showed that cell binding was observed on the arrayed spots with immobilized antibodies which exhibited reactivity to the cells in flow cytometry. It was further found that the density of cells attached to antibody spots was correlated to the mean fluorescent channel recorded in flow cytometry. These results demonstrate that data obtained by cell binding assays on the antibody array are comparable to those by the conventional flow cytometry, while throughput of the analysis is much higher with the antibody array-based method than flow cytometry. Accordingly, we concluded that the antibody array provides a high-throughput analytical method useful for the quality control of mesenchymal stem cells.

To examine the effects of carbon ion and gamma ray irradiation on cancer-induced osteoclastogenesis, mouse calvaria MC3T3-E1 cells were cultured with conditioned medium from irradiated and non-irradiated MCF7 human breast cancer cells. The authors examined RANKL and OPG mRNA expression in osteoblastic MC3T3-E1 cells following treatment with conditioned MCF7 medium. Co-cultured MC3T3-E1 and bone marrow cells treated with conditioned medium from irradiated MCF7 cells showed decreased numbers of osteoclasts, assessed using TRAP staining. Conditioned medium from control MCF7 cells elevated the RANKL/OPG mRNA ratio in MC3T3-E1 cells; this effect was suppressed by carbon ion irradiation of the MCF7 cells. These data demonstrate that indirect interactions between breast cancer cells and MC3T3-E1 cells induce osteoclastogenesis in vitro through modulation of RANKL expression and that this process is suppressed by carbon ion irradiation.

Effects of magnetic field (maximum field, 4 and 93 T(2) m(-1)) on the propagation speed of a chemical wavefront from the Belousov-Zhabotinsky reaction were studied in a thin glass tube. The downward and upward speed and the horizontal one are, respectively affected significantly by vertical and horizontal magnetic fields. Observations of the wavefront shape in magnetic fields showed that the magnetic force-induced convection causes the observed effects.

We evaluated the effects of high-dose major components in oral disinfectants on oral cells from the standpoints of the cell cycle and apoptosis. We examined the viability and cell cycle of human gingival fibroblasts (HGFs) treated with the components of dental disinfectants, benzethonium chloride (BEC), benzalkonium chloride (BAC), and povidone iodine (PVD-I) using a cell counting kit and flow cytometry. The IC(50) inhibitory concentration value in HGF cultures at 24 hours was 1.3x10(-2) mM BEC, 6.0x10(-3) mM BAC, and 2.6x10(-1) mM PVD-I. In the cell cycle analysis, propidium iodide-stained HGFs were arrested in G(0)/G(1) of the cell cycle by all three disinfectants, and in the apoptosis assay, annexin V-FITC/PI-stained HGFs that became apoptotic at 5.0x10(-2) and 1.0x10(-1) mM BEC and 5.0x10(-2) and 1.0x10(-1) mM BAC, but not in PVD-I at concentrations as high as 5.0x10(-1) mM. Our findings describe the effects of high-dose oral disinfectants, rather than clinical concentrations. Nevertheless, appreciating the effects of high-dose disinfectants absorbed into the human body is important, where they may accumulate in specific tissues and cells.

Anthraquinones are widely present in plant kingdom, and clinically used as laxatives. Environmental contaminants, dioxins, develop various adverse effects through transformation of a cytosolic aryl hydrocarbon receptor (AhR). We investigated the effects of 18 anthraquinones and 7 of their structurally related compounds on transformation of the AhR estimated by its DNA-binding activity in the cell-free system. 1,4-Dihydroxyanthraquinone (quinizarin), 1,5-dihydroxyanthraquinone (anthrarufin), 1,8-dihydroxyanthraquinone (danthron), and 5-hydroxy-1,4-naphthoquinone (juglone) strongly suppressed DNA-binding activity of the AhR induced by 0.1 nM 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), with their IC(50) values around 1 muM. On the other hand, anthraquinone, 2,6-dihydroxyanthraquinone (anthraflavic acid), and 2-hydroxy-1,4-naphthalendione (lawsone) showed moderate effects. Quantitative structure-activity relationships analysis demonstrated that hydroxyl groups at C1 or C4 but not C3 position of anthraquinone structure are critical for the suppressive effects. In addition, all compounds except lawsone had no agonistic effect. The suppressive effects of anthraquinones in a cultured cell system were also confirmed. In human hepatoma HepG2 cells, chrysophanol, danthron, and rhein also suppressed the DNA-binding activity in a dose-dependent manner, although aloe-emodin showed a moderate effect. The findings of this study may be useful for the design of the novel antagonists of the AhR.

Objectives: The effects of chlorine dioxide (ClO2), sodium hypochlorite (NaOCl), and hydrogen peroxide (H2O2) on cell death and the cell cycle of human gingival fibroblast (HGF) cells were examined., Methods: The inhibition of HGF cell growth was evaluated using a Cell Counting Kit-8. The cell cycle was assessed with propidium iodide-stained cells (distribution of cells in G0/G1, S, and G2/M phases) using flow cytometry. The patterns of cell death (necrosis and apoptosis) were analyzed using flow cytometry with annexin V-FITC/PI staining., Results: The lethal doses for 50% of the cells (LD50) of ClO2, NaOCl, and H2O2 were 0.16, 0.79, and 0.11 mM, respectively. All three dental disinfectants induced G0/G1 cell cycle arrest. H2O2 induced apoptosis at concentrations of 0.05 and 0.1 mM, while NaOCl and ClO2 did not induce significant apoptosis at any concentration examined., Conclusions: These results suggest that ClO2 is sufficient for use as a dental disinfectant compared with H2O2 or NaOCl.

Conventional comparative molecular field analysis (CoMFA) requires at least 3 orders of experimental data, such as IC 50 and K i, to obtain a good model, although practically there are many screening assays where biological activity is measured only by rating scale. To improve three-dimensional quantitative structure-activity relationship (3D-QSAR) analysis, we developed in this study a modified ordinal classification-oriented CoMFA using partial-least-squares generalized linear regression and ridge estimation. The modified Logistic CoMFA was validated using a corticosteroid binding globulin receptor binding data set, a benchmark for 3D-QSAR, and an acetylcholine esterase inhibitor data set. Our results show that modification of Logistic CoMFA enhanced both prediction accuracy and 3D graphical analysis. In addition, the 3D graphical analysis of the modified Logistic CoMFA was much improved. This improvement resulted in more accurate information on the binding mode between proteins and ligands than in the case of conventional CoMFA.

Absorption spectra of polycrystalline L-, D-, and DL-tartaric acid have been measured by terahertz time domain spectroscopy (THz-TDS). Different absorption bands are observed for DL-tartaric acid and its enantiomers (L- and D-tartaric acid). This result shows that the THz-TDS can be used for distinguishing between DL-tartaric acid and enantiomers (L- and D-tartaric acid). Moreover, partial least square (PLS) can be found to improve the quantitation of L-tartaric acid in L- and DL-tartaric acid mixture by THz-TDS.

Comparative Molecular Field Analysis (CoMFA) is most widely used as one of the 3-dimensional QSAR (3D-QSAR) methods to identify the relationship between chemical structure and biological activity. Conventional CoMFA requires at least 3 orders of experimental data, such as IC50 and Ki, to obtain a good model, although practically there are many screening assays where biological activity is measured only by a rating scale. Hence, rating classification-oriented CoMFA coupled with ordinal logistic regression has been developed, and its predictive ability and 3D graphical analysis ability have been investigated. As a result, this novel CoMFA (Logistic CoMFA) has been found to be more robust than conventional CoMFAs in both predictive and 3D graphical analysis abilities. Furthermore, Logistic CoMFA is useful since it can provide the probability of each rank.

We investigated the effects of carbon ion and gamma-irradiation on osteoblastic MC3T3-E1 cells by comparing mRNA expression levels for RANKL and osteoprotegerin by RT-PCR. MC3T3-E1 cells were irradiated with 2, 4, or 6 Gy of carbon ions or gamma-rays, and total RNA was harvested 1, 2, 3, 5, or 7 days after irradiation. The RANKL mRNA/OPG mRNA ratio in carbon ion-irradiated MC3T3-E1 cells was lower, while in gamma-irradiated MC3T3-E1 cells this ratio was higher than in non-irradiated cells. To evaluate osteoclastogenesis of MC3T3-E1 cells, carbon ion- or gamma-irradiated cells were co-cultured with non-irradiated cells from murine bone marrow. Staining for tartrate-resistant acid phosphatase (TRAP) in co-cultures showed that carbon ion irradiation suppressed osteoclastogenesis. This result is consistent with the lower RANKL/OPG mRNA ratio for carbon ion-irradiated cells. These results suggest that carbon ion irradiation acts primarily on osteoblastic cells, leading to a decrease in the RANKL/OPG mRNA ratio. This effect, in turn, leads to a decrease in osteoclastogenesis and osteoclast activity, which results in an increase in bone volume.

This study highlights the essential concept in the statistical treatment of medical and pharmaceutical data. To explain the concept, artificial data generated using random numbers was analyzed, and the importance of the confidence interval and distribution of data was shown. Sole use of the standard deviation (SD) is not considered appropriate from the viewpoint of clinical treatment, because many oversights occur. It was shown by considering the confidence interval that such oversights rarely occur, and the safety level is increased. Moreover, the probability of the occurrence of outliers from the average can be calculated by the distribution of data. Thus, pharmacokinetic data for humans were examined. The results for the human data also support the importance of the confidence interval and the distribution of differences between groups.