Search

Monolayer boron nanosheet, commonly known as borophene, has garnered significant attention in recent years due to its unique structural, electronic, mechanical, and thermal properties. This review paper provides a comprehensive overview of the advancements in the synthetic strategies, tunable properties, and prospective applications of borophene, specifically focusing on its potential in energy storage devices. The review begins by discussing the various synthesis techniques for borophene, including molecular beam epitaxy (MBE), chemical vapor deposition (CVD), and chemical methods, such as ultrasonic exfoliation and thermal decomposition of boron-containing precursors. The tunable properties of borophene, including its electronic, mechanical, and thermal characteristics, are extensively reviewed, with discussions on its bandgap engineering, plasmonic behavior, and thermal conductivity. Moreover, the potential applications of borophene in energy storage devices, particularly as anode materials in metal-ion batteries and supercapacitors, along with its prospects in other energy storage systems, such as sodium-oxygen batteries, are succinctly, discussed. Hence, this review provides valuable insights into the synthesis, properties, and applications of borophene, offering much-desired guidance for further research and development in this promising area of nanomaterials science., (© 2024 The Author(s). Small published by Wiley‐VCH GmbH.)

Packaging materials are a significant part of our lives due to their daily usage at grocery stores, supermarkets, restaurants, pharmaceuticals, etc. Packaging plays an important role in ensuring that the products are preserved during handling, transporting, and storage. Similarly, it helps to maintain and prolong the shelf life of products. These materials are used for packaging meats, poultry and seafood products, food and beverages, cosmetics, and pharmaceutical products. Several applications of packaging materials have been discussed extensively, with little discussion on their end of life and continuous availability without impacting the environment. This study presents the need for sustainable packaging as a result of growing demands and the environmental impact of packaging materials after use. This study also presents the importance, types, and applications of packaging materials. Based on the findings of this study, sustainable packaging is made possible by using bio-based and recyclable materials. These materials contribute a great deal to protecting and ensuring a sustainable environment.

This study investigates the effect of using ethanol as the process control agent during the wet ball milling of niobium (Nb). Dried nanocrystal Nb powders, of high purity, with particle sizes, ranging from 8.5 to 14.3 nm, were synthesized by ball milling. Commercial Nb powder of particle sizes of - 44 µm was employed by using the planetary ball mill equipped with stainless still vials with still balls in ethanol. A ball-to-powder mass ratio of 10:1 was used at a rotation speed of 400 rpm, an interval of 15 min with an interval break of 5 s, and a milling time of 10 h. The powder was dried in vacutec at a temperature of 100 °C, using a speed of 15 rpm in the vacuum of 250 mbar at a time of approximately 653 min. The crystal phase of the dried powders was analyzed using X-ray diffraction (XRD) with CuK ɑ radiation, and by modification of the Scherrer equation, a single crystallite size of 11.85 nm was obtained. The morphology of the particles was observed using scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS). The XRD results show that the pure crystal sizes in nanometre (nm), which decreases as the 2θ and the full width at half maximum (FWHM) increases., (© 2021. The Author(s).)

Recently, the issues of land-based plastics and their associated challenges in the marine world have been widely publicised in the media and scientific literature. Thus far, despite these communications, there have been few reports that have focused on the issues that acute plastic waste generation and its poor management pose to human health and the global environment. Also, articles on ways to mitigate these issues particularly in sub-Saharan Africa have not been documented. Indeed, there is significant scope for improvements in plastic waste management in developing countries, which offer a wide range of economic and environmental benefits. Plastic waste generation in sub-Saharan Africa is dependent on many factors like urbanization, etc. Currently, the population of sub-Saharan Africa is around 1 billion as of the year 2019, the amount of generated waste is 180 million tonnes at the rate of 0.5% per capita per day, the amount that is openly dumped is 70% and the plastic waste generated annually is 17 million tonnes. Therefore, this study aims to provide an overview of the plastic lifecycle and problems associated with plastic waste management in sub-Saharan Africa, including current practices, public participation and opinion, and government regulations. In addition, this highlight aims to outline the impact of plastic waste proliferation on man and the environment; and the economic and environmental benefits of proper plastic waste management. Critical discussion of current processes and the suitability of potential solutions provide the basis for proposition on mitigation measures to avert the negative impact of plastic waste., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Constructed wetland is an innovative and emerging ecological technology for wastewater treatment. This study was conducted to investigate the effectiveness of a Vegetated Submerged Bed Constructed Wetland (VSBCW) for removal of heavy metals from industrial wastewater in a steel manufacturing company. A pilot Effluent Treatment Plant (ETP) consisting of equalization basin, two VSBCW basins and a storage tank was constructed. The VSBCW was constructed using 10-30 mm round granite for the different zones. This was overlaid by 200 mm deep granite and 150 mm washed sand with Phragmites karka, Vetiveria nigritana and Cana lilies as macrophytes. Irrigation of macrophytes using effluent from the industry was done after 3 months of planting and ETP monitored. Industrial wastewater samples were collected and analyzed for heavy metals such as zinc (Zn), lead (Pb), iron (Fe), manganese (Mn), magnesium (Mg) and chromium (Cr) to know the treatment efficiency of the ETP. Results indicated that the removal efficiencies of the VSBCW for Pb, Mg and Cr were 15.4%, 79.7% and 97.9% respectively. Fe and Mn were seen to increase by 1.8% and 33% respectively. The ETP using locally available macrophytes is effective in the phytoremediation of heavy metals, particularly Cr from the wastewater.