Search

The phase behavior of block copolymers (BCPs) at the water-oil interface is influenced by the segmental interaction parameter ( χ${\chi }$ ) and chain architecture. We synthesized a series of star block copolymers (s-BCPs) having polystyrene (PS) as core and poly(2-vinylpyridine) (P2VP) as corona. The interaction parameters of block-block ( χ${\chi }$ PS-P2VP ) and block-solvent ( χ${\chi }$ P2VP-solvent ) were varied by adjusting the pH of the aqueous solution. Lowering pH increased the fraction of quaternized-P2VP (Q-P2VP) with enhanced hydrophilicity. By transferring the equilibrated interfacial assemblies, morphologies ranging from bicontinuous films at pH of 7 and 3.1 to nanoporous and nanotubular structure at pH of 0.65 were observed. The nanoporous films formed hexagonally packed pores in s-BCP matrix, while nanotubes comprised Q-P2VP as corona and PS as core. Control over pore size, d-spacing between pores, and nanotube diameters was achieved by varying polymer concentration, molecular weight, volume fraction and arm number of s-BCPs. Large-scale nanoporous films were obtained by freeze-drying emulsions. Remarkably, the morphologies of linear BCPs were inverted, forming hexagonal-packed rigid spherical micelles with Q-P2VP as core and PS as corona in multilayer. This work provides insights of phase behaviors of BCP at fluids interface and offer a facile approach to prepare nanoporous film with well-controlled pore structure.

Star block copolymers (s-BCPs), comprised of multiple linear diblock copolymers joined at a central point, are shown to segregate to the interface between two immiscible homopolymers that are identical to the blocks of the s-BCPs. The s-BCPs undergo a configurational transition at the interface, with different blocks of copolymers being embedded in their respective homopolymers, thereby bridging the interface and promoting adhesion. A series of 4-arm s-BCPs were synthesized with hydrogenated or deuterated polystyrene (PS/dPS) as the core block and poly(2-vinylpyridine) (P2VP) as the corona block, which was directly placed at the interface between the two homopolymers. Neutron reflectivity (NR) was used to determine the concentration profiles of the PS homopolymer, s-BCP core blocks, and P2VP total segments under equilibrium. The investigation varies the molecular weight (MW) and the total number of s-BCPs at the interface. Self-consistent-field theory (SCFT) was also employed to calculate the concentration profiles of the components at the interface, which were in excellent agreement with experimental results. The NR showed that the interfacial width between the homopolymers increased with the increasing number of s-BCPs at the interface up to a saturation limit. Beyond this limit, additional s-BCPs were released into the corona-miscible phase as unimolecular micelles. For a comparable interlayer thickness of s-BCPs at the interface, lower MW s-BCPs generated a broader interface. SCFT analysis suggested that, at the same packing density, the arms of the low MW s-BCPs align more parallel to the interface, while the arms of high MW s-BCPs adopt a more normal orientation, like their linear BCP counterparts. Furthermore, it was also observed that the core blocks, constrained by the junction points, were oriented more parallel and closer to the interface than the corona blocks. The phase behavior of the polymer blends revealed that s-BCP additives can efficiently reduce the domain size, with the low MW yielding smaller domain sizes due to the greater reduction in the interfacial energy and the high MW arresting phase separation due to their higher binding energy and a jamming of the interfacial assemblies. Asymmetric double cantilever beam (ADCB) tests demonstrated that s-BCPs promoted adhesion more efficiently than their linear BCP counterparts due to stronger binding energy per molecule, suggesting a more efficient compatibilizer for polymer upcycling. The results from these studies provide fundamental insights into the assembly of s-BCPs at homopolymer interfaces, the reduction of domain size, and promotion of adhesion, providing a strategy for the use of s-BCPs as stealth surfactants and universal compatibilizers.

Anion exchange membranes (AEMs) are a promising class of materials for applications that require selective ion transport, such as fuel cells, water purification, and electrolysis devices. Studies of structure–morphology–property relationships of ion-exchange membranes revealed that block copolymers exhibit improved ion conductivity and mechanical properties due to their microphase-separated morphologies with well-defined ionic domains. While most studies focused on symmetric diblock or triblock copolymers, here, the first example of a midblock quaternized pentablock AEM is presented. A symmetric ABCBA pentablock copolymer was functionalized to obtain a midblock brominated polymer. Solution cast films were then quaternized to obtain AEMs with resulting ion exchange capacities (IEC) ranging from 0.4 to 0.9 mmol/g. Despite the relatively low IEC, the polymers were highly conductive (up to 60 mS/cm Br− at 90 °C and 95%RH) with low water absorption (

Cyclic ketene acetals (CKAs) possess unique features in two aspects. On one hand, after the addition of a radical on the alkene, CKAs can undergo ring‐opening via radical rearrangement, enabling polyester preparation based on chain‐growth polymerization. On the other hand, the alkene connected with two electron‐donating oxygens in a strained form exhibit unique reactivities, resulting in complex reactions in the presence of electron deficient compounds. In this investigation, fundamental studies on CKA radical ring‐opening polymerization and charge‐mediated reactions were performed. Alternating copolymers of CKA and maleimides, or maleates, were prepared and characterized. Quantum chemistry modeling from the perspectives of reaction kinetics and thermodynamics enabled an in‐depth mechanistic study on the side reactions between CKA and maleic anhydride or itaconic anhydride, inspiring the techniques to minimize those side reactions in competition with radical copolymerization. After purifying the anhydride monomers with sublimation, the copolymerization with CKA successfully occurred. The anhydride containing polyester structures with an alternating sequence were confirmed with comprehensive characterizations. Facile post‐functionalization with an alcohol was performed, resulting in carboxylate containing polyesters. [ABSTRACT FROM AUTHOR]

Amphiphilic polymers based on modular norbornene derivatives exhibit good antibacterial activities and high selectivity for bacteria versus red blood cells. The study showed the preparation of fully synthetic high molecular weight polymers that mimic the activities of host-defensive peptides in the absence of a specific secondary structure.

One of the important challenges in designing robust alkaline anion exchange membranes is the difficulty associated with the chemical stability of covalently bound cationic units. Here, a systematic study exploring alkaline stabilities of polymerizable hexyltrimethylammonium cations is presented, where the hexyl chain is linked to a phenyl ring through a direct carbon‐carbon, phenyl ether, or benzyl ether functionality. For this work, small molecule model compounds, styrenic monomer analogs, and their homopolymers are synthesized. Alkaline stabilities of the small molecule cations and their homopolymers are compared to alkaline stability of benzyltrimethylammonium (BTMA) cation and its homopolymer poly(BTMA), respectively. All the hexyl‐tethered cations and their homopolymers are significantly more stable under strongly alkaline conditions (2 m KOD at 80 °C). Moreover, ether‐linked cations show comparable stability to the direct carbon‐carbon linked cation. Via 1H NMR analyses, possible degradation mechanisms are investigated for each small molecule cation. Findings of this study strongly suggest that the alkaline stability is dictated by the steric hindrance around the β‐hydrogen. This study expands beyond the limits of general knowledge on alkaline stability of alkyl‐tethered ammonium cations via the Hofmann elimination route, highlights important design parameters for stable ammonium cations, and demonstrates accessible directly polymerizable alkaline stable ammonium cations. [ABSTRACT FROM AUTHOR]

In the study, cadmium selenide nanoparticles are stabilized with phosphine oxide and then used in the polymerization of cyclic olefins. This is done by ruthenium-catalyzed ring-opening metathesis polymerization.

Ionic conductivity in a polymeric fuel cell requires water uptake. Previous theoretical studies of water uptake used idealized parameters. We report a parameter-free prediction of the water-swelling behavior of a model fuel cell membrane. The model polymers, poly(methyl-butylene)-block-poly(vinylbenzyl-trimethylamine), form lamellar domains that absorb water in humid air. We use the Scheutjens-Fleer methodology to predict the resulting change in lamellar structure and compare with x-ray scattering. The results suggest locally uniform water distributions. However, under conditions where a PVBTMA and water mixture phase-separate, the two phases arrange into stripes with a dilute stripe sandwiched between two concentrated stripes. A small amount of water enhances conductivity most when it is partitioned into such channels, improving fuel-cell performance. [ABSTRACT FROM AUTHOR]

The length of pendant side chains in charged, random, comb‐shaped polymers dictates the nature of their short‐range ordering. Random copolymers, and terpolymer, of 4‐vinylpyridine (4VP), styrene, and isoprene were synthesized and subsequently fully quaternized with 1‐alkylbromides having varying number of carbons on the alkyl group ranging from 2 to 8. Evaluation by wide angle X‐ray scattering revealed that dipole–dipole attraction facilitates the formation of ionomer cluster morphology in samples with two carbons on the pendant side chain, whereas for samples with four or more carbons on the pendant side chains, side‐chain sterics was dominant resulting in periodic backbone spacing. Copolymers with isoprene, having flexible backbones, favor the formation of ionomer cluster morphology while styrene copolymers having rigid backbones disfavor the formation of ionomer clusters. An "in‐line" dipole model was developed to predict the separation distance at which both ionomer cluster and backbone–backbone morphologies could coexist. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019, 57, 1325–1336 [ABSTRACT FROM AUTHOR]

The synthesis of rac-Me2Si(2-SiMe3-4-CMe3C5H2)2YR or (rac-BpYH)2 provides the firstiso-specific, single component Ziegler-Natta polymerization catalyst. (rac-BpYH)2 is obtained by addition of YCl3(THF)3 to LiBp, followed by deprotonation and removal of lithium chloride and tetrahydrofuran. The catalystis shown to effectively induce the polymerization of propylene, 1-butene, 1-pentene and 1-hexene into medium molecular weight (4,200-24,000) polymers.

Understanding the structure–property relationships and the phenomena responsible for ion conduction is one of the keys in the design of novel ionomers with improved properties. In this report, the morphology and the mechanism of ion exchange in a model anion exchange membrane (AEM), poly(vinyl benzyl trimethyl ammonium bromide)-block-poly(methylbutylene) ([PVBTMA][Br]-b-PMB), is investigated with small angle X-ray scattering, high-resolution thermogravimetry, modulated differential scanning calorimetry, dynamic mechanical analysis, and broadband electrical spectroscopy. The hyper-morphology of the material consists of hydrophilic domains characterized by stacked sides of [PVBTMA][Br] which are sandwiched between “spaghetti-like” hydrophobic cylindrical parallel domains of the PMB block. The most important interactions in the hydrophilic domains occur between the dipoles of ammonium bromide ion pairs in the side chains of adjacent chains. A reordering of the ion pair dipoles is responsible for a disorder–order transition (Tδ) at high temperature, observed here for the first time in AEMs, which results in a dramatic decrease of the ionic conductivity. The overall mechanism of long range charge transfer, deduced from a congruent picture of all of the results, involves two distinct ion conduction pathways. In these pathways, hydration and the motion of the ionic side groups are crucial to the conductivity of the AEM. Unlike the typical perfluorinated sulfonated proton-conducting polymer, the segmental motion of the backbone is negligible. [ABSTRACT FROM AUTHOR]

Anion exchange membranes (AEM) are polymer electrolytes that facilitate ion transport in alkaline fuel cells and electrochemical devices. Fabrication of mechanically durable AEMs with high ionic conductivity is a challenge. Here, a copolymer of isoprene and vinylbenzyl trimethylammonium and a terpolymer of isoprene, vinylbenzyl trimethylammonium and styrene were crosslinked by various methods, and properties, including conductivity and mechanical strength, were investigated at dry and saturated conditions. Polymer chemistry and degree of crosslinking significantly influenced conductivity, swelling, and mechanical properties. The terpolymer had a higher proportion of vinylbenzyl trimethylammonium units increasing the ion exchange capacity (IEC), but membranes could still be rendered insoluble by crosslinking. The higher IEC of the terpolymer resulted in higher chloride conductivity, 20-75 mS/cm at 50°C and 95%RH, compared to 4-17 mS/cm for the copolymer at the same conditions. At dry conditions films were stiff, having Young's moduli between 100-740 MPa, but hydration caused severe softening, reducing moduli by 1-2 orders of magnitude. The severe softening effect of hydration was confirmed by dynamic mechanical analysis. The AEMs studied did not have adequate mechanical durability at hydrated conditions, additional work is needed to determine polymer chemistries and crosslinking methods that will produce robust AEMs for long-term use in fuel cells and electrochemical devices. [ABSTRACT FROM AUTHOR]