Search

Building integrated photovoltaic thermal (BIPV/T) systems offer a highly effective means of generating clean energy for both electricity and heating purposes in residential buildings. Hence, this article introduces a new BIPV/T system to optimally minimize the energy consumption of a household residential building. The meticulous design of the proposed BIPV/T system is accomplished through MATLAB/Simulink® dynamic modeling. Performance analysis for the BIPV/T system is performed under different seasonal conditions with in-depth techno-economic analyses to estimate the expected enhancement in the thermal, electrical, and economic performance of the system. Moreover, a sensitivity analysis is conducted to explore the impact of various factors on the energetic and economic performances of the proposed BIPV/T system. More so, the two-layer feed-forward back-propagation artificial neural network modeling is developed to accurately predict the hourly solar radiation and ambient temperature for the BIPV/T. Additionally, a multi-objective optimization using the NSGA-II method is also conducted for the minimization of the total BIPV/T plant area and maximization of the total efficiency and net thermal power of the system as well as to estimate the optimized operating conditions for input variables across different seasons within the provided ranges. The sensitivity analysis revealed that higher solar flux levels lead to increased electric output power of the BIPV/T plant, but total efficiency decreases due to higher thermal losses. Moreover, the proposed NSGA-II shows a feasible method to attain a maximum net thermal power and optimal total efficiency of 5320 W and 63% with a minimal total plant area of 32.89 m2 that attained a very low deviation index from the ideal solution. The levelised cost of electricity is obtained as 0.10 $/kWh under the optimal conditions. Thus, these findings offer valuable insights into the potential of BIPV/T systems as a sustainable and efficient energy solution for residential applications.

Building integrated photovoltaic thermal (BIPV/T) systems offer a highly effective means of generating clean energy for both electricity and heating purposes in residential buildings. Hence, this article introduces a new BIPV/T system to optimally minimize the energy consumption of a household residential building. The meticulous design of the proposed BIPV/T system is accomplished through MATLAB/Simulink® dynamic modeling. Performance analysis for the BIPV/T system is performed under different seasonal conditions with in-depth techno-economic analyses to estimate the expected enhancement in the thermal, electrical, and economic performance of the system. Moreover, a sensitivity analysis is conducted to explore the impact of various factors on the energetic and economic performances of the proposed BIPV/T system. More so, the two-layer feed-forward back-propagation artificial neural network modeling is developed to accurately predict the hourly solar radiation and ambient temperature for the BIPV/T. Additionally, a multi-objective optimization using the NSGA-II method is also conducted for the minimization of the total BIPV/T plant area and maximization of the total efficiency and net thermal power of the system as well as to estimate the optimized operating conditions for input variables across different seasons within the provided ranges. The sensitivity analysis revealed that higher solar flux levels lead to increased electric output power of the BIPV/T plant, but total efficiency decreases due to higher thermal losses. Moreover, the proposed NSGA-II shows a feasible method to attain a maximum net thermal power and optimal total efficiency of 5320 W and 63% with a minimal total plant area of 32.89 m2 that attained a very low deviation index from the ideal solution. The levelised cost of electricity is obtained as 0.10 $/kWh under the optimal conditions. Thus, these findings offer valuable insights into the potential of BIPV/T systems as a sustainable and efficient energy solution for residential applications. [ABSTRACT FROM AUTHOR]

The growing demand for energy has led to the popularity of building integrated photovoltaic (BIPV) systems. However, photovoltaic (PV) system efficiency decreases as the temperature increases. To address this issue, a study was conducted on a BIPV thermal (BIPVT) system, which can generate both thermal and electrical energy, to enhance its efficiency. In this study, for the cold weather in Tabriz city in Iran, BIPV and BIPVT systems are compared with each other in terms of energy, economy, exergy, and environment (4E) and the goal is to fully supply the thermal and electrical load of the desired building. The studied criteria are electrical power and heat recovery, payback time (PBT), exergy efficiency, and saved carbon dioxide (SCD) from the energy, economic, exergy, and environmental point of view, respectively. Finally, it is concluded that in cold weather, the BIPVT system can achieve a 7.15% improvement in produced power compared to the BIPV system and 52.2% of the building's heating needs are provided. It also causes the exergy efficiency to improve by an average of 1.69% and saves 34.98 ton of carbon dioxide. The PBT of this study is calculated as 5.77 years for the BIPV system and 4.78 years for the BIPVT system. [ABSTRACT FROM AUTHOR]

The growing demand for energy has led to the popularity of building integrated photovoltaic (BIPV) systems. However, photovoltaic (PV) system efficiency decreases as the temperature increases. To address this issue, a study was conducted on a BIPV thermal (BIPVT) system, which can generate both thermal and electrical energy, to enhance its efficiency. In this study, for the cold weather in Tabriz city in Iran, BIPV and BIPVT systems are compared with each other in terms of energy, economy, exergy, and environment (4E) and the goal is to fully supply the thermal and electrical load of the desired building. The studied criteria are electrical power and heat recovery, payback time (PBT), exergy efficiency, and saved carbon dioxide (SCD) from the energy, economic, exergy, and environmental point of view, respectively. Finally, it is concluded that in cold weather, the BIPVT system can achieve a 7.15% improvement in produced power compared to the BIPV system and 52.2% of the building’s heating needs are provided. It also causes the exergy efficiency to improve by an average of 1.69% and saves 34.98 ton of carbon dioxide. The PBT of this study is calculated as 5.77 years for the BIPV system and 4.78 years for the BIPVT system.

Surface Combatants are highly dependent on fossil fuels for their propulsion. During the course of its voyage, these vessels experience considerable amounts of drag or resistance based on the operational environment and their hull form. Reduction of this drag would result in a corresponding reduction in fuel costs, exhaust emissions, and an increase in the vessel's speed and range. The operational flexibility of the vessel is enhanced by an increase in the time between successive refuellings, as well as the distance over which the vessel can operate without the need for replenishment. Of the many energy saving devices, fitment of a stern flap on Surface combatants is a very popular cost-effective means for drag reduction. The U.S Navy has extensively installed stern flaps on their combatants and, through this experience, found that suitably designed stern flaps had reduced the power requirement of the vessel they were fitted on by about 4--19%, an amount that translates to significant fuel savings and reduction in emissions. This paper will discuss the concept of stern flaps, examine the benefits offered by this technology on U.S Naval platforms, and will present the scope of leveraging this technology in Indian Defence Shipbuilding and Ship repair which could lead to significant reductions in power and emissions without compromising the platform's performance. [ABSTRACT FROM AUTHOR]