Search

Polyamide-imides (PAIs) are highly desired in many applications because of their superior thermal and mechanical properties. In this work, PAI was prepared from an amide-containing diamine and dianhydride by polycondensation and thermal treatment. Both PAI films and aligned electrospun nanofibers (ANFs) were fabricated. FT-IR was used to determine the structure formation of PAI at different annealing temperatures. DSC and TGA were used to evaluate the thermal properties of PAI, while tensile test was applied to evaluate the mechanical properties of PAI films and ANFs. The results indicated that the PAI possessed both outstanding thermal stability and mechanical properties, which provide opportunities for applications in gas separation, high temperature filtration, reinforcement, etc. [ABSTRACT FROM AUTHOR]

High mechanical performance carbon nanofibers are highly required for the carbon nanofiber-reinforced composites, and it is necessary to develop novel precursors for the preparation of carbon nanofibers. In this work, blends of poly(acrylonitrile-butyl acrylate mono-butyl itaconate) (co-PAN) and polyamic acid (PAA) were electrospun into aligned nanofibers and the nanofibers were converted to carbon nanofibers by thermal imidization, pre-oxidation and high-temperature carbonization. FT-IR spectroscopy was applied to monitor the chemical structures of the nanofibers before and after pre-oxidation. Tensile tests were used to characterize the mechanical properties of electrospun carbon nanofibers (ECNFs). The microstructures of ECNFs were investigated by high-resolution TEM and Raman spectroscopy. The results indicated that the ECNFs derived from blend of co-PAN/PAA with molar ratio of 6/4 and with carbonization temperature of 1400 °C possessed the highest tensile strength of 1212 MPa, which could be attributed to the ordered graphitic structures in ECNFs. [ABSTRACT FROM AUTHOR]

Mechanically strong electrospun nanofibers at high temperature are highly desired in the aerospace industry, high temperature filtration and fire protection clothing. In the present work, highly tough poly(imide-co-benzoxazole) (PI-co-PBO) nanofiber belts with excellent thermal stability, mechanical properties and thermomechanical properties were produced from the highly viscous methoxy-containing polyamic acid (MeO-PAA) solution by electrospinning followed by thermal rearrangement. The chemical structures of the polymer nanofibers and the corresponding thermal rearrangement were confirmed by 1H-NMR, FT-IR and TGA. The mechanical properties and thermomechanical properties were characterized by a tensile test and thermomechanical analysis (TMA). The aligned nanofiber belts heat-treated at 450 °C (ANF-450) had the highest tensile strength of 559 MPa, a modulus of 11.2 GPa and a toughness of 12.0 J g−1, respectively, which were much higher than those of the pure PBO films made by thermal rearrangement. The TMA test showed that the ANF-450 exhibited a high tensile strength retention of 90% and a modulus retention of 94% at a high temperature of 200 °C. These excellent thermomechanical properties make electrospun PI-co-PBO nanofibers promising candidates in high temperature areas. [ABSTRACT FROM AUTHOR]

High mechanical performance materials at high temperature are highly desired for the materials used in high temperature industries. This study reports the aligned electrospun polyimide nanofiber belt (A-PI-NFB) fabricated from the electrospinning followed with imidization. The A-PI-NFB showed increased mechanical and thermal mechanical properties as increasing the imidization temperature. At room temperature, the A-PI-NFB imidized at 450 °C (A-PI-NFB-450) had the highest tensile strength (689 MPa) and E modulus (13.2 GPa). The thermomechanical analysis (TMA) and dynamic mechanical analysis (DMA) showed that A-PI-NFB-450 possessed 80% tensile strength and 90% modulus when heated at 300 and 350 °C in N 2 , respectively. These excellent properties made A-PI-NFB good candidates for use in high temperature filtration, protective clothes etc. [ABSTRACT FROM AUTHOR]

Abstract: This work highlights the usage of short electrospun fibers for the first time for the preparation of homogeneous polymer nanofiber/polymer composites and the improvement in mechanical properties by an order to magnitude compared to as-electrospun long and continuous nanofibers. Dispersions of short electrospun nanofibers can be processed by liquid processing techniques resulting in nanofiber nonwovens similar to electrospun nonwovens but is independent from the demands of the electrospinning process is one of the emphasis of this work. The re-formation of electrospun fiber nonwovens by dispersion casting of short electrospun polyimide (PI) nanofibers and the preparation of homogeneous polymer/polymer nanofiber composite films were selected as representative examples for showing the versatility of short electrospun fibers. The self-reinforced PI/PI-short nanofiber composite films were obtained from mixtures of short electrospun PI nanofibers and polyamic acid after imidization. Significant improvement of 53% and 87% in mechanical properties like tensile strength and modulus, respectively in comparison to the neat PI film was observed by using just 2wt% of short fibers. Parallel experiments were also carried out with long and continuous electrospun PI fibers and amazingly a huge difference was observed. The amount of continuously long fibers required for achieving almost the same strength was much higher i.e. 38wt% in comparison to the 2wt% required of short fibers. [Copyright &y& Elsevier]

Electrospinning is an effective and versatile method to prepare continuous polymer nanofibers and nonwovens that exhibit excellent properties such as high molecular orientation, high porosity and large specific surface area. Benefitting from these outstanding and intriguing features, electrospun nanofibers have been employed as a promising candidate for the fabrication of food packaging materials. Actually, the electrospun nanofibers used in food packaging must possess biocompatibility and low toxicity. In addition, in order to maintain the quality of food and extend its shelf life, food packaging materials also need to have certain functionality. Herein, in this timely review, functional materials produced from electrospinning toward food packaging are highlighted. At first, various strategies for the preparation of polymer electrospun fiber are introduced, then the characteristics of different packaging films and their successful applications in food packaging are summarized, including degradable materials, superhydrophobic materials, edible materials, antibacterial materials and high barrier materials. Finally, the future perspective and key challenges of polymer electrospun nanofibers for food packaging are also discussed. Hopefully, this review would provide a fundamental insight into the development of electrospun functional materials with high performance for food packaging. [ABSTRACT FROM AUTHOR]

Highlights: [•] Heat-resistant electrospun PBO nanofibers were prepared from precursor OH-PAA. [•] The obtained PBO nanofibers are thermally stable up to 643°C. [•] The obtained PBO nanofibers have excellent mechanical properties. [•] PBO nanofibers have retention of tensile strength and modulus over 80% at 350°C. [•] Such heat-resistant PBO nanofibers could be used in high temperature fields. [ABSTRACT FROM AUTHOR]

La–Mn bimetal oxide nanofibers, used as an adsorbent for the defluoridation of water, were synthesized by an electrospinning and heat treatment technology. The La–Mn bimetal oxide nanofiber adsorbent with a specific surface area of 35.064 m2 g−1 displayed a good defluoridation performance. Both the adsorption kinetics and equilibrium for fluoride (F−) uptake onto La–Mn bimetal oxide nanofibers were investigated. The kinetic studies established that the adsorption attained equilibrium at about 90 min, and the PSO kinetic model was ideal for the kinetic data under 20 and 50 mg L−1. The Langmuir maximum F− uptake was computed to be 189.39 mg g−1 at 308 K and pH 3. A thermodynamic study affirmed a feasible, endothermic, spontaneous and entropy driven process of F− adsorption towards La–Mn bimetal oxide nanofibers at the studied temperature range. Except for the competitive adsorption of PO43− and F−, the presence of NO3−, CO32−, Cl− and SO42− had little effect on fluoride removal. The La–Mn bimetal oxide adsorbent exhibited a good reusability. [ABSTRACT FROM AUTHOR]

Quantitative explanation on the improved mechanical properties of aligned electrospun polyimide (PI) nanofibers as the increased imidization temperatures is highly required. In this work, polarized FT-IR spectroscopy is applied to solve this problem. Based on the polarized FT-IR spectroscopy and the molecular model in the fibers, the length of the repeat unit of PI molecule, the angle between the fiber axis and the symmetric stretching direction of carbonyl group on the imide ring, and the angle between the PI molecular axis and fiber axis are all investigated. The Mark-Howink equation is used to calculate the number-average molar mass of PI molecules. The orientation states of PI molecules in the electrospun nanofibers are studied from the number-average molar mass of PI molecules and the average fiber diameter. Quantitative analysis of the orientation factor of PI molecules in the electrospun nanofibers is performed by polarized FT-IR spectroscopy. [ABSTRACT FROM AUTHOR]

Electrospinning is a common method for preparing nanomaterials. Among many electrospinning materials, electrospun carbon nanofibers (CNFs) have become one of the hot research directions for advanced functional materials owing to their good mechanical properties, high surface area, excellent flexibility, physical and chemical stability. Particularly, significant progress has been made in the engineering advancement of electrospinning, electrospun CNFs and their derived reinforced composites to fulfill various applications. This review aims to afford a comprehensive overview of electrospun CNF reinforced composites. Firstly, the different precursors, the correlative properties, and surface modification strategies (e.g. , physical modification and chemical modification) of electrospun CNFs are introduced. Secondly, the preparation methods of reinforced composites based on electrospun CNFs are described in detail. Then, the functional applications of electrospun CNF reinforced composites are discussed. Finally, the challenges and future solutions of electrospun CNF reinforced composites are also prospected. This review is expected to offer a basic but deep understanding of modification strategies to heighten the surface performances of CNFs for the future development of high-performance electrospun CNF reinforced composites in the composite industry, defense, and aerospace applications. [Display omitted] • Electrospun CNF reinforced composites are widly used in engineering materials. • The precursors and modification strategies of electrospun CNFs are detailly reviewed. • Diverse preparation and application of CNF reinforced composites are summarized. • The current challenges of electrospun CNF reinforced composites are discussed. • The future prospects of CNF-based composites in advanced engineering are proposed. [ABSTRACT FROM AUTHOR]

Mechanical properties of polyimide (PI) electrospun nanofibers could be improved by increasing imidization temperatures. However, the intrinsic mechanism on this phenomenon is highly required, which is helpful to improve mechanical properties of electrospun nanofibers by external thermal treatment. In this work, single electrospun PI nanofibers (SNF-PI) with different imidization temperatures were prepared. The nanofiber morphology was studied by SEM and AFM and the mechanical properties were measured by single fiber micro-tensile test. Polarized Raman Spectroscopy was applied to determine the PI molecular orientation in SNF-PI. The molecular orientation factor provides directly explanation on the effect of imidization temperatures on the mechanical properties of SNF-PI. [ABSTRACT FROM AUTHOR]

[Display omitted] • The recent progress of electrospun nanofibers as electrocatalysts for flexible metal-air batteries has been reviewed. • The fundamental principles of electrospinning technique have been introduced. • The importance of bifunctional electrocatalysts for oxygen reduction and oxygen evolution in metal-air batteries has been highlighted. • Future perspectives of novel electrospun nanofibers composite for flexible metal-air batteries have been proposed. Rechargeable metal-air (O 2) batteries have been regarded as the promising candidates for wearable and flexible energy devices owing to their outstanding energy density, low cost, and high safety. Generally, the electrocatalyst at air cathode plays a significant role in various metal-air (O 2) batteries. As a versatile and efficient technique, electrospinning has been considered as a powerful method to fabricate nanofibers, which hold great potential as bifunctional electrocatalysts for such batteries. Although great progresses have been achieved in improving the electrochemical performance of catalysts in recent years, some critical challenges still maintain. In this review, the advanced electrospun carbon nanofiber-based electrocatalysts for flexible metal-air batteries have been summarized. Then, additional discussions have been included focusing on the advantages and characteristics of different nanofibers and some special requirements for various flexible metal-air batteries. Moreover, some current challenges and future prospects in the development of electrospun carbon nanomaterials for flexible metal-air cathode catalysts have been rationally analyzed. [ABSTRACT FROM AUTHOR]

• Single PI/rGO composite nanofiber by in-situ polymerization and in-situ thermal conversion. • Tensile strength of single nanofiber up to 4.2 GPa (PI/rGO-1.0% single nanofiber). • Modulus of single nanofiber up to 121 GPa (PI/rGO-1.2% single nanofiber). • Homogeneous dispersion of rGO by in-situ strategies. • In-situ strategies enhance the interfacial interaction between rGO and PI fibrous matrix. High mechanical performance electrospun polymeric nanofibers are highly desired for practical applications, especially as reinforcements for composites. However, most of the electrospun polymeric nanofibers present tensile strength < 3 GPa. To overcome such limitation, this work successfully prepared single rGO reinforced polyimide composite nanofiber with tensile strength up to 4.2 GPa (PI/rGO-1.0%) and modulus up to 121 GPa (PI/rGO-1.2%) by applying in-situ polymerization, electrospinning, and in-situ thermal conversion. These mechanical properties are higher than other polymer-based electrospun nanofibers, and 45% and 236% higher than those of neat PI single nanofiber, respectively. The in-situ strategies provide the homogeneous dispersion of rGO in single electrospun nanofibers and enhance the interfacial interaction between rGO and PI. In addition, the PI/rGO composite nanofibers also present excellent thermal stability with glass transition temperature (T g) > 295 °C, and the 5% thermal decomposition temperature (T 5%) > 539 °C. This work would open a new route for the preparation of high performance electrospun nanofibers for composites. [ABSTRACT FROM AUTHOR]