Search

The presence of seasonal algal blooms with harmful algae-derived organic matters threatens the performance of ultrafiltration in drinking water treatment. The hybrid process of in-situ ozonation with ceramic ultrafiltration membrane was proposed for the treatment of algal-rich water with effective removal of algal cells and mitigation of membrane fouling. The mechanism of membrane fouling mitigation with in-situ ozonation was systematically investigated from the perspective of cake layer, gel layer and membrane pore blocking. The results showed that in-situ ozonation treatment can effectively mitigate membrane fouling. For instance, transmembrane pressure was reduced by 75.8% with in-situ ozonation at 1 mg/L. In-situ ozonation resulted in the formation of a more porous and thinner cake layer due to the disintegration of extracellular organic matters that attached on the algal surface. Besides, the portion of very high molecular weight biopolymers (around 100 kDa) and the hydrophobic fraction of algae-derived organic matters, the main component intercepted by the ceramic membrane, were reduced with in-situ ozonation and thus leaded to less severe gel layer fouling. Furthermore, in-situ ozonation induced the accelerated organics degradation within the ceramic membrane pores, alleviating the membrane pore blocking. [ABSTRACT FROM AUTHOR]

Inorganic salts (e.g., FeCl 3 and FeSO 4) are typically added to membrane bioreactor (MBR) for achieving improved total phosphorus (TP) removal and hydraulic performance. However, at the iron dose (e.g., Fe to P molar ratio of 1–4) required for effective TP removal, severe irreversible membrane fouling could become a significant concern. In this context, intermittent in-situ ozonation was provided for the first time directly in the membrane tank of Fe(II)-dosed membrane bioreactor, and its effect on membrane fouling mitigation was assessed and elucidated. The basic effluent quality remained unaffected, indicating that in-situ ozonation had no detrimental effects. In addition, concentration of foulants and the relative abundance of biofilm-forming microbes were comparable in both the Fe-MBR and Fe/O 3 -MBR. Importantly, as compared to the Fe-MBR, a 33% reduction in membrane fouling was achieved in the Fe/O 3 -MBR. The enhanced filterability of mixed liquor and the scrubbing of the membrane surface by ozone with the direct/indirect oxidation of the deposited foulants contributed to membrane fouling mitigation in the Fe/O 3 -MBR. Meanwhile, trans -membrane pressure profiles of MBRs followed cake-intermediate fouling mechanism. This study demonstrates that provision of intermittent in-situ ozonation is a simple and attractive approach to extend the operation of iron-dosed MBR. [Display omitted] • Performance of in-situ ozonation combined with Fe-MBR (Fe/O 3 -MBR) was elucidated. • Abundance of biofilm-forming bacteria was comparable in both Fe- and Fe/O 3 -MBR. • Ozonation improved mixed liquor properties and delayed the onset of severe fouling. • Increased floc size and membrane scrubbing by ozone contributed to fouling control. • Cake-intermediate fouling was the fouling mechanism in both Fe- and Fe/O 3 -MBR. [ABSTRACT FROM AUTHOR]