Search

International audience; Halogen bonding (XB) interactions are investigated in cation radical salts of bis(methylthio)-5,5'-diiodotetrathiafulvalene (1). Electrocrystallization of 1 in the presence of Bu NCl affords a 1 1 salt formulated as (E-1)Cl. Particularly strong I⋅⋅⋅Cl XB interactions are observed around the Cl anion with the distances at 78 % the sum of the van der Waals radii, a consequence of the XB charge activation in the cation radical. Moreover, the Cl environment is complemented by two extra S⋅⋅⋅Cl chalcogen bonding (ChB) interactions, an original feature among reported halide salts of TTF derivatives. Electrostatic potential calculations on the cation radical further demonstrate the efficient activation of the S atoms of the 1,3-dithiole rings (V =87.2 kcal/mol), as strong as with the iodine atoms (V =87.9 kcal/mol). The radical cations form weakly dimerized stacks, as confirmed by the variable-temperature magnetic susceptibility and the weak conductivity (4.8×10 S cm ).

The synthesis of [2.2]paracyclophane derivatives containing tetrathiafulvalene units has been accomplished by the coupling reaction of 4-([2.2]paracyclophan-4-yl)-1,3-dithiol-2-thione in the presence of trimethylphosphite. The 1,3-dithiol-2-thione derivative was in turn synthesized by the regioselective bromination of 4-acetyl[2.2]paracyclophane, then through the corresponding dithiocarbamates and 1,3-dithiolium salts.

International audience; The synthesis and properties of a series of bis-tetrathiafulvalenes (bis-TTFs) containing nitrophenyl, aminophenyl or dimethylaminophenyl is reported. The synthesis was carried out by using routes involving Wittig-type, cross-coupling, reduction and alkylation reactions. The electron donor ability of these new compounds has been measured by cyclic voltammetry (CV). Charge transfer complexes with tetracyanoquinodimethane (TCNQ) were prepared by chemical redox reactions. The complexes have been proven to give conducting materials.

Tris-fused tetrathiafulvalene (TTF) derivatives, TTCn-TTPY, 2,2′-bis[4,5-alkylthio-(1,3-dithiol-2-ylidene)-1,3,4,6-tetrathiapentalenylidene] with four alkylthio chains [CnH2n+1S: n=3–5] are prepared and the structural and conducting properties are investigated. Crystals of the neutral molecules show very low electrical resistivity (400 Ω cm) as single-component pure organic materials. Irrespective of the alkylthio chain length, the crystal structures are so-called β″-type consisting of uniform stacks of the tris-fused TTF parts. Iodine-doped TTC3-TTPY exhibits metallic conductivity down to liquid helium temperature.

As the use of low-molecular-weight gelators (LMWGs) as components in single and multicomponent systems for optoelectronic and solar cell applications increases, so does the need for more functional gelators. There are relatively few examples of p-type gelators that can be used in such systems. Here, the synthesis and characterization of three amino-acid-functionalized p-type gelators based on terthiophene, tetrathiafulvalene, and oligo(phenylenevinylene) are described. The cores of these molecules are already used as electron donors in optoelectronic applications. These newly designed molecules can gel water to form highly organized structures, which can be dried into thin films that show p-type behavior.

While mechanical bonding stabilizes tetrathiafulvalene (TTF) radical dimers, the question arises: what role does topology play in catenanes containing TTF units? Here, we report how topology, together with mechanical bonding, in isomeric [3]- and doubly interlocked [2]catenanes controls the formation of TTF radical dimers within their structural frameworks, including a ring-in-ring complex (formed between an organoplatinum square and a {2+2} macrocyclic polyether containing two 1,5-dioxynaphthalene (DNP) and two TTF units) that is topologically isomeric with the doubly interlocked [2]catenane. The separate TTF units in the two {1+1} macrocycles (each containing also one DNP unit) of the isomeric [3]catenane exhibit slightly different redox properties compared with those in the {2+2} macrocycle present in the [2]catenane, while comparison with its topological isomer reveals substantially different redox behavior. Although the stabilities of the mixed-valence (TTF2)^(•+) dimers are similar in the two catenanes, the radical cationic (TTF^(•+))_2 dimer in the [2]catenane occurs only fleetingly compared with its prominent existence in the [3]catenane, while both dimers are absent altogether in the ring-in-ring complex. The electrochemical behavior of these three radically configurable isomers demonstrates that a fundamental relationship exists between topology and redox properties.

The control of the loss mechanism in a dye sensitised solar cell (DSSC) via recombination of the injected electron with the oxidised dye was investigated by incorporating a redox-active ligand, 6,7-bis(methylthio)tetrathiafulvalene dithiolate (TTF(SMe)2), into a ruthenium bipyridyl dye. A series of dyes with general formula [Ru(4,4'-R-bpy)2(TTF(SMe)2], where R = H, CO2Et and CO2H, were synthesised and characterised using electrochemistry, absorption and emission spectroscopy, spectroelectrochemistry and hybrid-DFT calculations. In addition, the performance of the acid derivative in a DSSC was investigated using IV measurements, as well as transient absorption spectroscopy. These complexes showed significant TTF-ligand character to the HOMO orbital, as deduced by spectroelectrochemical, emission and computational studies. Upon adsorption of the acid derivative to TiO2 a long-lived charge-separated state of 20 ms was observed via transient absorption spectroscopy. Despite this long-lived charge-separated state, the dye yielded extremely low DSSC efficiencies, attributed to the poor regeneration of the neutral dye by iodide. As a result, the complex forms a novel long-lived charge separated state that persists even under working solar cell electrolyte conditions.

Since the first reports more than a half-century ago, interest in self-assembled monolayers (SAMs) on metal surfaces has increased almost exponentially. At present, such supported SAMs are used for numerous applications, ranging from metallurgy—wherein the surface properties, such as conductivity, wettability, corrosion resistance, and etching resistance, are modified—to the preparation of sensors and materials for use in separations. In fact, the use of SAMs is now recognized as offering a convenient, flexible, and simple way to tailor the interfacial properties of metals. This is because the spontaneous organization and absorption of molecules on metal, metal oxide, or semiconducting surfaces often creates highly ordered systems with well-defined dimensions on the nanoscale. During the last decade, increasing attention has been dedicated to the design and elaboration of SAMs that integrate a molecular or ionic receptor unit with a transducer element so as to create sensing devices for environmental or biologic purposes. If a redox-active element is incorporated into the monolayer or the guest, the recognition event can be followed by cyclic voltammetry (CV). In other cases, the monitoring can be completed by using impedance spectroscopic measurements. Although, cation (generally metallic ions) recognition using SAMs is well documented, and several systems that exhibit both excellent selectivity and sensitivity have been described in the literature, much less work on anion recognition by using SAMs has been reported, perhaps reflecting the fact that anions have variable sizes and shapes and exhibit strong solvation in most solvents. The first anion recognition SAM systems were reported by Astruc et al. and involved the use of ferrocene derivatives for dihydrogenophosphate anion detection. More recently, Echegoyen et al. described SAMs for use in acetate anion recognition. Although these systems are very selective, their sensitivity is relatively low and the limits of detection do not reach the sub-millimolar scale. Calix[4]pyrrole and its derivatives have been extensively studied in the search for chemosensors capable of recognizing specific chemical species, with a number of optically active calix[4]pyrrole-based sensors having now been reported. Some of us have recently described the first fully successful examples of electrochemically active sensors based on calix[4]pyrroles; these were prepared by attaching one, two, or four redox-active tetrathiafulvalene (TTF) units directly to the calix[4]pyrrole platform so as to produce receptors with enhanced binding affinities toward anions as compared to the parent meso-octamethyl calix[4]pyrrole. In the case of the mono-TTF calix[4]pyrrole, we observed selectivity between the chloride anion (Ka= 2900m ) and the bromide anion (Ka=96m ) in CH2Cl2 solution. This success has led us to consider that TTF calix[4]pyrroles could be used to create anion-sensing SAMs. These kinds of receptors are attractive in this regard because they incorporate within one molecular framework both pyrrolebased anion recognition and TTF-derived transducer subACHTUNGTRENNUNGunits. We wish to report here that such SAMs may be prepared and that they are effective for chloride anion recognition at the sub-millimolar level, thus providing a sensitivity that differs dramatically from previously reported systems. [a] L. G. Jensen, Dr. K. A. Nielsen, Prof. J. O. Jeppesen Department of Physics and Chemistry University of Southern Denmark Campusvej 55, DK-5230, Odense M (Denmark) Fax: (+45)6615-8780 E-mail : joj@ifk.sdu.dk Homepage: http://www.jojgroup.sdu.dk [b] Dr. T. Breton, Prof. Dr. E. Levillain, Dr. L. Sanguinet Universit d’Angers—CNRS 2 boulevard Lavoisier 49045, Angers Cedex (France) E-mail : eric.levillain@iniv-angers.fr lionel.sanguinet@univ-angers.fr [c] Prof. J. L. Sessler Department of Chemistry and Biochemistry The University of Texas at Austin 1 University Station, A5300, Austin, TX 78712-0165 (USA) Supporting information for this article is available on the WWW under http://dx.doi.org/10.1002/chem.200901394.

International audience; The synthesis and characterization of two ortho-dimethyltetrathiafulvalene (o-DMTTF)-based rigid dimers containing dimethylsilicon (Me(2)Si) or dimethylgermanium (Me(2)Ge) linkers are described. Single-crystal X-ray analysis reveals planar geometry for the central 1,4-disilicon or 1,4-digermanium six-membered rings. DFT calculations provide optimized conformations in agreement with the experimental ones, and also emphasize the role of the heteroatomic linkers in the conjugation between the two redox active units. Cyclic voltammetry measurements show sequential oxidation into radical cation, and then dication species. Solution EPR measurements on the radical-cation species indicate full delocalization of the unpaired electron over both electroactive TTF units, with an associated coupling of 0.42 G with twelve equivalent protons. DFT calculations afford fully planar geometry for the radical-cation species and confirm the experimental isotropic coupling constant. Single-crystal X-ray analyses of two charge-transfer compounds obtained upon chemical oxidation, formulated as [(Me(2)Si)(2)(o-DMTTF)(2)].1/2[TCNQ].1/2[TCNQF(4)] and [(Me(2)Ge)(2)(o-DMTTF)(2)].[TCNQ], demonstrate the occurrence of genuine mixed-valence radical-cation species, as well as a three-dimensional network of short S...S intermolecular contacts. Temperature-dependent conductivity measurements demonstrate semiconducting behavior for both charge-transfer compounds, with an increase of the absolute value of the conductivity upon applying external pressure. Band structure calculations reveal peculiar pseudo-two-dimensional electronic structures, also confirming electronic interactions through SiMe(2) and GeMe(2) bridges.

C 5 H 4 O 2 S 3 ,monoclinic, P 12 1 / c 1(no.14), a =3.9797(1)A, b =6.0394(2)A, c =31.1165(6)A, =91.868(1)°, V =747.5A 3 , Z =4, R gt (F) =0.119, wR ref (F 2 ) =0.324, T =200K. Source of material In the literature 4-methoxycarbonyl-1,3-dithiole-2-thione wasobtainedinthreesteps[1].Inthepresentone-potsynthesistheti-tlecompoundwasobtainedundersolventfreeconditionscata-lyzedbypotassiumcyanideinthepresenceofsilicaassolidsupportat200°C(85%yield).0.2mmolof4,5-bis(carbonyl-methoxy)-1,3-dithiole-2-thione,0.4mmolofpotassiumcyanideand0.2gofsilicaweremixedinamortar.Thispowderwasheatedfor1hat200°C.Thecolorofthemixturewasturnedfromyellowtolightbrown.Thepurecompoundwasobtainedbyfiltrationofthesolutionindichloromethane,followedbyevaporationofsol-ventandpreparativechromatographyoversilicagel.TheproductwascharacterizedbyIR, 1 HNMR,and 13 CNMRspectroscopy. Experimental details TheX-rayreflectionswereratherbroadanddiffuse,butthedataturnedouttobeuseable.Allhydrogenatomsweretreatedusingappropriateridingmodels.Thebadqualityofthecrystalsandthedatasetwerethereasonsforthelarge

The advantages of organic field-effect transistors (OFETs), such as low cost, flexibility and large-area fabrication, have recently attracted much attention due to their electronic applications. Practical transistors require high mobility, large on/off ratio, low threshold voltage and high stability. Development of new organic semiconductors is key to achieving these parameters. Recently, organic semiconductors have been synthesized showing comparable mobilities to amorphous-silicon-based FETs. These materials make OFETs more attractive and their applications have been attempted. New organic semiconductors resulting in high-performance FET devices are described here and the relationship between transistor characteristics and chemical structure is discussed.