Search

Objective The purpose of this study was to develop a natural language processing (NLP) pipeline to identify incidental thyroid nodules (ITNs) meeting criteria for sonographic follow-up and to assess both adherence rates to white paper recommendations and downstream outcomes related to these incidental findings. Methods 21583 non-contrast chest CT reports from 2017 and 2018 were retrospectively evaluated to identify reports which included either an explicit recommendation for thyroid ultrasound, a description of a nodule ≥ 1.5 cm, or description of a nodule with suspicious features. Reports from 2018 were used to train an NLP algorithm called fastText for automated identification of such reports. Algorithm performance was then evaluated on the 2017 reports. Next, any patient from 2017 with a report meeting criteria for ultrasound follow-up was further evaluated with manual chart review to determine follow-up adherence rates and nodule-related outcomes. Results NLP identified reports with ITNs meeting criteria for sonographic follow-up with an accuracy of 96.5% (95% CI 96.2-96.7) and sensitivity of 92.1% (95% CI 89.8-94.3). In 10006 chest CTs from 2017, ITN follow-up ultrasound was indicated according to white paper criteria in 81 patients (0.8%), explicitly recommended in 46.9% (38/81) of patients, and obtained in less than half of patients in which it was appropriately recommended (17/35, 48.6%). Discussion NLP accurately identified chest CT reports meeting criteria for ITN ultrasound follow-up. Radiologist adherence to white paper guidelines and subsequent referrer adherence to radiologist recommendations showed room for improvement.

Paper-based microfluidic devices are popular for their ability to automate multistep assays for chemical or biological sensing at a low cost, but the design of paper microfluidic networks has largely relied on experimental trial and error. A few mathematical models of flow through paper microfluidic devices have been developed and have succeeded in explaining experimental flow behavior. However, the reverse engineering problem of designing complex paper networks guided by appropriate mathematical models is largely unsolved. In this article, we demonstrate that a two-dimensional paper network (2DPN) designed to sequentially deliver three fluids to a test zone on the device can be computationally designed and experimentally implemented without experimental trial and error. This was accomplished by three new developments in modeling flow through paper networks: (i) coupling of the Richards equation of flow through porous media to the species transport equation, (ii) modeling flow through assemblies of multiple paper materials (test membrane and wicking pad), and (iii) incorporating limited-volume fluid sources. We demonstrate the application of this model in the optimal design of a paper-based signal-enhanced immunoassay for a malaria protein, PfHRP2. This work lays the foundation for the development of a computational design toolbox to aid in the design of paper microfluidic networks. ©

Introduction: Water is essential for normal functioning of the human body. Total fluid intake assessment using fluid record method is considered to be a burden for respondents, and the development of technology is expected to contribute favourably to this issue. My Fluid Diary is a smartphone-based application developed by the researcher as a fluid intake recording tool. This study aimed to evaluate the acceptance of manual, paper-based fluid intake recording compared to using My Fluid Diary as a trial among Indonesian vocational female students. Methods: A qualitative study was conducted to explore students’ acceptance of fluid intake recording using the smartphone-based application. An exploratory case study approach involving 38 female students as key informants was used via focus group discussion and in-depth interview as a method of triangulation. Results: Based on the data, female adolescents admitted that the application was more acceptable for fluid intake than recording manually using a book, in consideration of three aspects - the benefits, the easiness, and the application display or features. Based on its benefits, My Fluid Diary was mentioned as easy to learn and use. However, in order to improve the application, there is still a need for research development. Conclusion: My Fluid Diary was an application with respectable acceptance for fluid record compared to the manual, paper-based method among female adolescents.

Comparative studies on paper and pencil– and computer-based tests principally focus on statistical analysis of students’ performances. In educational assessment, comparing students’ performance (in terms of right or wrong results) does not imply a comparison of problem-solving processes followed by students. In this paper, we present a theoretical tool for task analysis that allows us to highlight how students’ problem-solving processes could change in switching from paper to computer format and how these changes could be affected by the use of one environment rather than another. In particular, the aim of our study lies in identifying a set of indexes to highlight possible consequences that specific changes in task formulation have, in terms of task comparability. Therefore, we propose an example of the use of the tool for comparing paper-based and computer-based tasks.

The spread of invasive alien plant species (IAPS) is a leading reason for worldwide environmental change due to their effects on biodiversity and humans. Some valued goods from IAPS have been produced, e.g. paper that consists of cellulose fibres from Japanese knotweed. Therefore, the aim of this study was to establish the usability of this paper grade as a printing substrate, since it does not have ideal optical properties as it is expected from commercial office paper. Because it is widely used, inkjet printing technology was employed. Print permanence is essential, especially when printing documents. However, typographic characteristics must be considered to make a text more legible. Two widely used typefaces (Arial and Times) were tested in three commonly used type sizes (8 pt, 10 pt, and 12 pt). The results showed that the paper made from Japanese knotweed could have valuable properties and suitable legibility, especially when using typefaces with a moderate counter size, high x-height, and minimal differences in the letter stroke width to obtain an appropriate typographic tonal density with an adequate type size. Even after exposure to light, the texts printed in a proper type size and stroke width remained visible.

General diagnosis of poultry viruses primarily relies on detection of viruses in samples, but many farms are located in remote areas requiring logistic transportation. Filter paper cards are a usef...

배경 및 목적: 본 연구는 언어발달지연 아동의 한국판 수용 · 표현 어휘력 검사에서 컴퓨터 기반(태블릿 PC) 매체와 종이 기반 매체를 이용하여 매체의 변화가 아동의 언어 수행력에 차이를 보이는지 알아보고자 하였다. 방법: 연구의 대상은 생활 연령이 만 3-7세의 언어발달지연 아동 27명을 대상으로 하였다. 언어발달지연 정도와 통합언어연령에 따라 각각 두...

The NIST selection process for standardizing Post-Quantum Cryptography Mechanisms is currently running. Many papers already studied their theoretical security, but the resistance in deployed device has not been much investigated so far. In particular, fault attack is a serious threat for algorithms implemented in embedded devices. One particularly powerful technique is to use safe-error attacks. Such attacks exploit the fact that a specific fault may or may not lead to a faulty output depending on a secret value. In this paper, we investigate the resistance of various Post-Quantum candidates algorithms against such attacks.

Due to the increasing use of the Internet and other online resources, there is tremendous growth in the data of text documents. It is not possible to manage this huge data manually. This has led to the growth of fields like text mining and text summarization. This paper presents a title prediction model for research papers using Recursive Recurrent Neural Network (Recursive RNN) and evaluates its performance by comparing it with sequence-to-sequence models. Research papers published between 2018 and 2020 were obtained from a standard repository, viz. Kaggle, to train the title prediction model. The performance of different versions of Recursive RNN and Seq2Seq was evaluated in terms of training and hold-out loss. The experimental results show that Recursive RNN models perform significantly better than the other models.

The clinical importance of blood group (BG) antigens is related to their ability to induce immune antibodies that can cause hemolysis. Yet, ABO and D (Rh) are still considered to be the key antigens for healthy blood transfusion and secondary antigens are the next priority. Serological typing is the most widely used typing method. Rapid and accurate blood grouping plays an important role in some clinical conditions, rather than conventional techniques. Hence, developing a simple and economical model for rapid blood grouping would facilitate these tests. In recent decades, paper-based microfluidics such as μPADs has gained much interest in wide application areas such as point-of-care diagnostic. In this study, we evaluated μPADs that are performed for blood grouping and its recent progress. A comprehensive literature search was performed using databases including PUBMED, SCOPUS, Web of Science and Google Scholar. Keywords were blood grouping or typing, paper analytical device, rapid test, etc. After investigation of search results, 16 papers from 2010 to 2020 were included. Further information in detail was classified in Table 1. Generally, two principles for blood typing μPADs are introduced. The lateral chromatographic flow method and the vertical flow-through method that detects BG in a visual-based manner. To detect results with acceptable clarity many factors and challenges like paper, blood sample, buffer, Ab and RBC interaction and also μPADs stability need to be considered, which are discussed. In conclusion, the simplicity, stability, cheapness, portability and biocompatibility of μPADs for blood grouping confirming its utility and also they have the capability to robust, universal blood-grouping platform. Table 1 Summary of blood grouping tests using paper-based analytical devices Antigens Type of diagnosis Validation method Sample No Accuracy Action time Paper type Stability Sample dilution Buffer Ref A, B, Rh Forward volunteers records 5 - - Whatman No. 4 - 1/2 PBS* (Khan et al. 2010) A, B, Rh Forward gel assay test and conventional slide test 100 100% 1 min Whatman No. 4 and Kleeenex paper towel 7 Days in 4 °C 1/1 NSS (Al-Tamimi et al. 2012) A, B, Rh Forward gel card assay 99 100% 20 Sec + Washing Kleeenex paper towel - 1/1 NSS (Li et al. 2012) A, B, Rh Forward - - - - Kleeenex paper towel - 45/100 PSS (Li et al. 2013) A, B, Rh Forward gel card assay 98 100% 1.5 min Kleeenex paper towel - 85/100 PBS (Guan et al. 2014b) C, E, c, e, K, Jka, Jkb, M, N, S, P1, and Lea Forward gel card assay 266 100% - Kleeenex paper towel - 1/1 NSS (Li et al. 2014b) A, B, Rh Forward and Reverse conventional slide test 96 ≈ 91% 10 min Whatman No. 1 21 Days in 4 °C 1/2 NSS (Noiphung et al. 2015) C, c, E, e, K, k, Fya, Fyb, Jka, Jkb, M, N, S and s, P1, Lea and Leb Forward - 478 - - Kleeenex paper towel - 1/1 NSS, PBS (Then et al. 2015) A, B Forward and Reverse conventional slide test 76 100% 5-8 min Whatman No. 4 38 Days in 4 °C 1/4, 1/1 NSS (Songjaroen and Laiwattanapaisal 2016) D, K Forward volunteers records 210 - 7.5 min Kleenex paper towel - 1/1 NSS (Yeow et al. 2016) A, B, c, e, D, C, E, M, N, S, s, P1, Jka, Jkb, Lea, Leb, Fya, and Fyb Forward and Reverse gel card assay 3550 ≈100% 30 s Fiber glass and cotton linter 180 Days in 25 °C 45/100, 1/1 PBS (Zhang et al. 2017) A, B Forward conventional slide test 598 100% 3 min Whatman No. 113 14 Day in 4 °C 1/1 NSS (Songjaroen et al. 2018) A, B, Rh Forward conventional slide test - - 30 Sec + Washing Unrefined sisal paper - 1/2 NSS (Casals-Terré et al. 2019) A, B, Rh Forward - - - - Whatman No.1 - 1/1 NSS (Ansari et al. 2020) ABORh Forward and Reverse conventional slide test - 100% Unrefined Eucalyptus papers - 1/2 NSS, PBS (Casals-Terré et al. 2020) A, B, Rh Forward - - - 30 Sec + Washing Whatman No. 4 modified with chitosan ≥ 100 days in 25 °C 1/1 NSS (Parween et al. 2020)

Paper spray ionization has been used as a fast sampling/ionization method for the direct mass spectrometric analysis of biological samples at ambient conditions. Here, we demonstrated that by utilizing paper spray ionization-mass spectrometry (PSI-MS) coupled with field asymmetric waveform ion mobility spectrometry (FAIMS), predictive metabolic and lipidomic profiles of routine breast core needle biopsies could be obtained effectively. By the combination of machine learning algorithms and pathological examination reports, we developed a classification model, which has an overall accuracy of 87.5% for an instantaneous differentiation between cancerous and noncancerous breast tissues utilizing metabolic and lipidomic profiles. Our results suggested that paper spray ionization-ion mobility spectrometry-mass spectrometry (PSI-IMS-MS) is a powerful approach for rapid breast cancer diagnosis based on altered metabolic and lipidomic profiles.

Paper prototypes have been successful for gathering concrete, grounded user feedback. Most of these prototypes are used to elicit feedback during bounded design sessions. However, for systems that support new social practices these bounded sessions do not fully materialize the interactions the prototype supports. This paper presents a case study of a six-month paper prototype deployment that materialized collaborative interactions in care retirement community. Throughout this deployment the prototype was situated within the lives of participants, where they shaped the interactions and usage of the prototype over time. As these interactions materialized, the evoked community practice was unlike what participants envisioned during our first, more traditional paper prototyping and design sessions. This article shows how our interactive, paper prototype provided critical guidance in how realistic our imagined practice would be.

Zone identification is a topic in the area of text mining which helps researchers be benefited by the content of scientific papers in a satisfactory manner. The major aim of zone identification is to classify the sentences of scientific texts into some predefined zone categories which can be useful for summarization as well as information extraction. In this paper, we propose a two-level approach to zone identification within which the first level is in charge of classifying the sentences in a given paper based on some semantic and lexical features. In this respect, several machine learning algorithms such as Simple Logistics, Logistic Model Trees and Sequential Minimal Optimization are applied. The second level is responsible for applying fusion to the classification results obtained for consecutive sentences of the first level in order to make the final decision. The proposed method is evaluated on ART and DRI corpora as two well-known data sets. Results obtained for the accuracy of zone identification for these corpora are respectively 65.75% and 84.15%, which seem to be quite promising compared to those obtained by previous approaches.

Thermal papers, commonly used for printed receipts or lottery tickets, are omnipresent in our everyday life. They are regarded as semi-porous substrates, and yet can be critical to analyze when looking for latent fingermarks due to their thermosensibility. The aim of this study was to investigate a development sequence that would better combine the adequate detection techniques in order to maximize the chances to develop latent fingermarks left on these substrates. Different methods of development have been compared on test substrates: black magnetic powder, Lumicyano™, thermal development, ninhydrin and 1,2-indanedione/ZnCl2. Whitening stages and thermal development have been focused on, tested and optimized. The results of these preliminary tests enabled the study of three development sequences. They have subsequently been compared to the one currently used in the Gendarmerie's laboratories and the best results have been provided during pseudo-operational comparative trials by one of these sequences, consisting in 6 stages.

One of the benefits of Internet of Vehicles (IoV) is improved traffic safety and efficiency, for example due to the capability to share vehicular messages in real-time. While most of the vehicular messages only need to be shared by nearby vehicles, some messages (e.g., announcement messages) may need to be more broadly distributed, for example to vehicles in a wider region. Finding a single trusted entity to store and distribute such messages can be challenging, and vehicles may not be inclined to participate (e.g., generation and distribution of announcement messages) unless they can benefit from such participation. In addition, achieving both security and privacy can be challenging. In this paper, we propose a blockchain based secure data sharing system to address the above challenges in an IoV setting. Specifically, in our system, announcement messages are stored using blockchain. To encourage/incentivize participation, vehicles that faithfully broadcast the announcement messages and/or contribute to the block generation will be rewarded by some cryptocurrency. Our system is also designed to be privacy-preserving and realizes both priori and posteriori countermeasures.

Performance/security trade-off is widely noticed in CFI research, however, we observe that not every CFI scheme is subject to the trade-off. Motivated by the key observation, we ask three questions: ➊ does trade-off really exist in different CFI schemes? ➋ if trade-off do exist, how do previous works comply with it? ➌ how can it inspire future research? Although the three questions probably cannot be directly answered, they are inspiring. We find that a deeper understanding of the nature of the trade-off will help answer the three questions. Accordingly, we proposed theGPTconjecture to pinpoint the trade-off in designing CFI schemes, which says that at most two out of three properties (fine granularity, acceptable performance, and preventive protection) could be achieved.

Recent advances in telecommunication technology and video conferencing systems have opened a new avenue for surgical instruction called “surgical telementoring.” This report from the Technology Working Group of the SAGES Project 6 Summit reviews the telementoring technology that currently exists and proposes recommendations for minimum technology requirements and future technology development. While also providing insight in regulatory considerations, this review offers what prospective surgical telementoring participants need to know about the underlying technology with a specific focus on safety, reliability, transmission quality, ease of use, and cost. Content experts from around the world, in minimally invasive surgery, surgical mentoring and telementoring, surgical education, business development, healthcare innovation, and regulation were invited to attend a 2-day summit in Los Angeles, USA to outline the current state of surgical telementoring and chart the challenges and opportunities going forward. This article summarizes the discussion, conclusions, and recommendation of the technology group with regard to telementoring technology. This article reviews the technical requirements which can be divided into the following categories: (1) safety, (2) reliability, (3) transmission quality, (4) ease of use, and (5) cost. Telementoring applications are technology driven. Given the pace of change of technology, guiding principles in technology design and selection are warranted (Table 4). Telementoring technologies require two basic components, video capturing and display devices at the transmitting and receiving end, and a telecommunication link between them. Many additional features can be added to this basic setup including multiple cameras or video sources, remote camera zoom and pan, recording and storage of videos and images, and telestration capabilities to mention just a few. In general, the cost of these technologies is feature driven. The education framework for each specific application should determine the need for these features (Schlachta in Surg Endosc https://doi.org/10.1007/s00464-016-4988-5 ).

Terrorist fraud is an attack against distance bounding protocols, whereby a malicious prover allows an adversary to authenticate on their behalf without revealing their secret key. In this paper, we propose new attack strategies that lead to successful terrorist frauds on proven-secure protocols.

Headline generation is a challenging subtask of abstractive text summarization, which its output should be a summary, shorter than one sentence. It would be precious to develop a dataset for the evaluation of abstractive summarization methods on this task in the Persian language. There are several datasets for headline generation in Persian, most of which are not large enough to be used by more sophisticated methods of text summarization, such as deep learning models. Moreover, all of these datasets are focused on daily news and there is no dataset for summarizing scientific Persian papers. In this article, we present “ElmNet,” a headline generation dataset of about 400,000 abstract/headline pairs of scientific papers, gathered from six major publishers for scientific articles in Persian. We, moreover, evaluate the performance of the most important deep learning-based headline generation methods, on the proposed dataset. The results prove the comparability of the performance of the state-of-the-art methods on this task, to their results on the existing English datasets.

Sistem QCS (Quality Control System) bisa memonitor kualitas kertas secara in-line saat proses produksi. Sistem QCS dapat mengeluarkan data kualitas kertas dalam bentuk log file teks. Data pada log file teks dapat diolah dan dianalisa untuk menjadi informasi kualitas kertas dengan parameter-parameter yang terdiri dari : basis weight (gramature), ash titrasi, moisture content, opasitas dan porositas. Informasi kualitas kertas ini disebut informasi paper profile. sistem Pengolahan Data Log QCS Menjadi Informasi Paper Profile pada penelitian ini dikembangkan dengan menggunakan metodologi prototyping dan bahasa pemrograman Visual Basic .Net. Pengolahan data pada sistem ini menggunakan metoda SPC (Statistical Process Control) dan memanfaatkan fasilitas-fasilitas yang dimiliki oleh Microsoft Excel yaitu pemrograman VBA, fungsi-fungsi statistik dan kemampuan membuat tampilan grafis yang menarik dan sudah sangat dikenal oleh pengguna komputer. Sistem informasi paper profile akan menyimpan dan mendistribusikan informasi paper profile melalui sebuah aplikasi berbasis web kepada pihak-pihak yang berkepentingan. Sehingga informasi paper profile dapat dibuat dan didistribusikan dengan mudah dan cepat . Informasi paper profile ini diperlukan untuk mengetahui kualitas produk dan untuk memonitor kapabilitas proses dalam menghasilkan produk. Kata kunci : QCS, Log File, Paper Profile, Statistical Process Control

When students believe they can get smarter, they understand that effort makes them stronger. Therefore, they put in extra time and effort, and that leads to higher achievement. Besides that, the arrangement of question papers and answer sheets process for a high number of students takes a long time. In this paper, the sheet exam has been proposed to change into an electric exam (E-exam). This system depended on the client-server framework to convert the traditional exam environment into an electronic exam, providing multiple and different questions at the same time. In additions, kept the grades of students and providing them automatically. In this paper, Visual Studio and Microsoft SQL server have been proposed to develop the electronic exam. The questionnaire is made by distributed it among 30 students, and after the data analysis, the results have been collected have been represented a response rate of 100%. It is recommended that, to take electronic exams and e-learning for students periodically. To improve their performance through continuous training on computerized exams and to increase the student’s efficiency in this type of learning.

Background The traditional informed consent (IC) process rarely emphasizes research participants’ comprehension of medical information, leaving them vulnerable to unknown risks and consequences associated with procedures or studies. Objective This paper explores how we evaluated the feasibility of a digital health tool called Virtual Multimedia Interactive Informed Consent (VIC) for advancing the IC process and compared the results with traditional paper-based methods of IC. Methods Using digital health and web-based coaching, we developed the VIC tool that uses multimedia and other digital features to improve the current IC process. The tool was developed on the basis of the user-centered design process and Mayer’s cognitive theory of multimedia learning. This study is a randomized controlled trial that compares the feasibility of VIC with standard paper consent to understand the impact of interactive digital consent. Participants were recruited from the Winchester Chest Clinic at Yale New Haven Hospital in New Haven, Connecticut, and healthy individuals were recruited from the community using fliers. In this coordinator-assisted trial, participants were randomized to complete the IC process using VIC on the iPad or with traditional paper consent. The study was conducted at the Winchester Chest Clinic, and the outcomes were self-assessed through coordinator-administered questionnaires. Results A total of 50 participants were recruited in the study (VIC, n=25; paper, n=25). The participants in both groups had high comprehension. VIC participants reported higher satisfaction, higher perceived ease of use, higher ability to complete the consent independently, and shorter perceived time to complete the consent process. Conclusions The use of dynamic, interactive audiovisual elements in VIC may improve participants’ satisfaction and facilitate the IC process. We believe that using VIC in an ongoing, real-world study rather than a hypothetical study improved the reliability of our findings, which demonstrates VIC’s potential to improve research participants’ comprehension and the overall process of IC. Trial Registration ClinicalTrials.gov NCT02537886; https://clinicaltrials.gov/ct2/show/NCT02537886

Paper writing with the existing writing format causing excessive paper usage. Excessive paper usage could lead to environmental destruction. Therefore, it is necessary to find an alternative in the writing procedure by doing an experimental design based on student reading comprehensive. This study uses Completely Randomized Factorial Experimental Design. After analysis of variance and the multiple comparisons test done, it results a new writing format alternative that use less paper than the existing writing procedure. In other hand, it results greater student reading comprehensive than the existing writing procedure. With the results, the application of the alternative procedure can save the paper usage and make student easier to understand the paper .

Many home IoT devices suffer from poor security design and confusing interfaces, lowering the bar for successful cyberattacks. A popular approach to identify compromised IoT devices is network-based detection, in which network traffic is analyzed to fingerprint and identify such devices. However, while several network-based techniques for identifying misbehaving devices have been proposed, the role of the user in remediating IoT security incidents has been conspicuously overlooked.

International audience; Despite predictions of the paperless office, global demand for printing and writing paper remains strong, and paper appears to be here to stay for some time. Not only firms, but also governments, libraries, and archives are in possession of large collections of legacy documents that still must be sorted and scanned. In this study, terahertz-based techniques are demonstrated to address several routine tasks related to the automated paper handling of unsorted legacy documents. Specifically, we demonstrate terahertz-based counting of the number of sheets in unconsolidated paper stacks, as well as locating stapled documents buried in paper stacks.

Cyber Forensics is termed as scientific methods or applications in association with the judiciary or court of laws. The aim behind these methods is to unveil the digital evidence to be utilized in court for solving crime cases. This sort of technology wasn’t practiced before therefore most criminals tend to urge away with their criminal acts without valid proof to incriminate or prosecute them. During that time the oaths, confessions, testimonies from witnesses were the sole determining factors of evidence Crimes committed within electronic or digital domains, particularly within cyberspace, have become common. Criminals are using technology to commit their offenses and make new challenges for law enforcement agents, attorneys, judges, military, and security professionals. Digital forensics has become a vital instrument in identifying and solving computer-based and computerassisted crime. This paper provides a quick introduction to cyber forensics. During this paper we present a typical model for both Incident Response and Computer Forensics processes which mixes their advantages in an exceedingly flexible way: It allows for a management oriented approach in digital investigations while retaining the chance of a rigorous forensics investigation. Keywords: cyber forensics, digital forensic science, computer forensics, evidence, judicial system.

Text summarization is one problem in natural language processing that generates a brief version of the original document. This research took attention for some researchers in this last decade and growing fast, including Indonesia language. This paper aims to recap summarization text research especially in Indonesia language. As usual, this paper discusses two summarization approaches, extractive and abstractive. In fact, the number of research of extractive is more than abstractive. This paper investigates some methods such as Statistical Based Approach, Graph Based Approach, Machine Learning Approach, Fuzzy Logic Approach, Algebraic Approach, and Hybrid Approach. This paper shows some methods details and summarize the results. Keywords— Text summarization, extractive summary, abstractive summary, natural language processing

Logic Programming (LP) is considered to be relatively simple for non-programmers, and allows the developer to focus on developing facts and rules of a logical derivation, and not on algorithms. Secure multiparty computation (MPC) is a methodology that allows several parties to process private data collaboratively without revealing the data to any party. In this paper, we bring together the notions of MPC and LP, allowing users to write privacy-preserving applications in logic programming language.

We propose new solutions that can efficiently address the problem of malicious memory access from pluggable computer peripherals and microcontrollers embedded within a system-on-chip. This problem represents a serious emerging threat to total-system computer security. Previous work has shown that existing defenses are insufficient and poorly deployed, in part due to performance concerns. In this paper we explore the threat and its implications for system architecture. We propose a range of protection techniques, from lightweight to heavyweight, across different classes of systems. We consider how emerging capability architectures (and specifically the CHERI protection model) can enhance protection and provide a convenient bridge to describe interactions among software and hardware components. Finally, we describe how new schemes may be more efficient than existing defenses.

Internet of Things (IoT) has drawn important attention in recent years since it has made revolutionary changes in human life. The IoT enables the exchange of information or data in a wide variety of applications such as smart buildings, smart health, smart transport, and so on. As billions of connected things communicate with each other and can interchange sensitive information that may be revealed. Hence, strengthening IoT’s security and preserving users’ privacy is a crucial challenge. The aim of this paper is to provide a comprehensive study of the IoT security. Several IoT security attacks are examined and a taxonomy of the security requirements based on the attacks purposes is proposed. Furthermore, recent security solutions are described and classified based on their application area. Ultimately, open research directions and security challenges are discussed.

Due to the growth of e-commerce, most of the banking transactions are made on the online platform and all these transactions are made on the websites provided by the merchant or the payable apps and because of this the vulnerability of attacks has increased and there are also chances of using fraudulent websites and apps by the attackers though there are many high-security algorithms are been used for safeguarding against vulnerabilities. The way of judging the relation of trust on the online platform has become a major issue, so a proper trust model also needs to be maintained. In this paper, we reviewed various security algorithms which involve cryptographic algorithms, machine learning, anonymization, and masking techniques, blockchain, distributed networks, and many more to provide integrity, privacy, reliability, authentication, security, and risk-less e-commerce platform.

Low-energy manufacturing of polymeric composites through two-dimensional electrothermal heaters is a promising strategy over the traditional autoclave and oven. Laser-induced graphene paper (LIGP) is a recent emergent multifunctional material with the merits of one-step computer aided design and manufacturing (CAD/CAM) as well as a flexible thin nature. To fully explore its capabilities of in situ heating, herein, we adventurously propose and investigate the customizable manufacture and modulation of LIGP enabled heaters with multimodally patternable performance. Developed by two modes (uniform and nonuniform) of laser processing, the LIGP heaters (LIGP-H) show distinctively unique characteristics, including high working range (>600 °C), fast stabilization (

When it comes to leaked credentials and credit card information, we observe the development and use of anti-fingerprinting browsers by malicious actors. These tools are carefully designed to evade detection, often by mimicking the browsing environment of the victim whose credentials were stolen. Even though these tools are popular in the underground markets, they have not received enough attention by researchers. In this paper, we report on the first evaluation of four underground, commercial, and research anti-fingerprinting browsers and highlight their high success rate in bypassing browser fingerprinting. Despite their success against well-known fingerprinting methods and libraries, we show that even slightest variation in the simulated fingerprint compared to the real ones can give away the presence of anti-fingerprinting tools. As a result, we provide techniques and fingerprint-based signatures that can be used to detect the current generation of anti-fingerprinting browsers.

We report a multiplexed paper-based assay powered by mobile imaging and machine learning for point-of-care diagnosis of Lyme Disease. Blind testing of 96 serum samples showed a sensitivity and specificity of 85.7% and 96.3%, respectively.

This paper offers a Talmudic norms solution to the paradox of the heap. The claim is that the paradox arises because philosophers use the wrong language to discuss it. We need a language about objects which is capable of expressing not only the declarative properties of the object (such as being a heap) but also how the object/heap was constructed. Such a view of objects comes from the Talmudic theory of mixtures.

The aim of the present study was to explore the relationship between testing mode (taking a test on computer versus paper) and two other factors: (1) cognitive load and (2) scratch paper use in an undergraduate general chemistry class setting. Cognitive load was measured with two self-report questions (perceived mental effort and level of difficulty) and scratch paper use was analyzed manually. All 221 students completed three assessments administered either on computer or paper. The assessments included a variety of chemistry topics with an equal number of three question types (algorithmic, conceptual, and definition). There was no significant difference in the cognitive load imposed by computer or paper-based tests at the overall test level or by question type. Students utilized scratch paper more on paper-based than online tests, especially when the questions were conceptual, and they used scratch paper the most for algorithmic questions. Altogether, these results provide further support that online testing can be implemented in educational settings without imposing additional cognitive load on students.

This study investigated the performance of four widely used data-collection designs in detecting test-mode effects (i.e., computer-based versus paper-based testing). The experimental conditions inc...

Machine learning (ML) has increasingly been adopted in safety-critical systems such as autonomous vehicles (AVs) and industrial robotics. In these domains, reliability and safety are important considerations, and hence it is critical to ensure the resilience of ML systems to faults and errors. On the other hand, soft errors are becoming more frequent in commodity computer systems due to the effects of technology scaling and reduced supply voltages. Further, traditional solutions for masking hardware faults such as Triple-Modular Redundancy (TMR) are prohibitively expensive in terms of their energy and performance overheads. Therefore, there is a compelling need to ensure the resilience of ML applications to soft errors on commodity hardware platforms.We first experimentally assess the resilience of safety-critical ML applications to soft errors. We demonstrate through fault injection experiments that even a single bit flip due to a soft error can lead to misclassification in Deep Neural Network (DNN) applications deployed in AVs, leading to safety violations. However, not all the errors in an DNN will result in serve consequences such as safety violations, and hence it is sufficient to protect the DNN from the ones that do. Unfortunately, finding all possible errors that result in safety violations is a very compute intensive task. We propose BinFI, a fault injection approach that efficiently injects critical faults that are highly likely to result in safety violations, based on the unique properties of DNNs. Finally, we propose Ranger, an approach to protect DNNs from critical faults with minimal performance overheads and no accuracy loss. We will conclude by presenting some of our ongoing work, and the future challenges in this area.

Paper (or plastic) certificates are considered as a means against different forgery of product quality and brand falsification. It is commonly to use barcodes or data matrices to solve this problem. However such approach does not work usually against such sophisticated attacks as cloning of certificate copies. In the current paper we propose to use a digital watermarking and estimation of inner noises of scanners and printers in order to detect cloning attack effectively. Algorithm of cloning attack detecting is presented. The probabilities of attack missing and false alarm are proved.

Purpose Identifying the frontiers of a specific research field is one of the most basic tasks in bibliometrics and research published in leading conferences is crucial to the data mining research community, whereas few research studies have focused on it. The purpose of this study is to detect the intellectual structure of data mining based on conference papers. Design/methodology/approach This study takes the authoritative conference papers of the ranking 9 in the data mining field provided by Google Scholar Metrics as a sample. According to paper amount, this paper first detects the annual situation of the published documents and the distribution of the published conferences. Furthermore, from the research perspective of keywords, CiteSpace was used to dig into the conference papers to identify the frontiers of data mining, which focus on keywords term frequency, keywords betweenness centrality, keywords clustering and burst keywords. Findings Research showed that the research heat of data mining had experienced a linear upward trend during 2007 and 2016. The frontier identification based on the conference papers showed that there were five research hotspots in data mining, including clustering, classification, recommendation, social network analysis and community detection. The research contents embodied in the conference papers were also very rich. Originality/value This study detected the research frontier from leading data mining conference papers. Based on the keyword co-occurrence network, from four dimensions of keyword term frequency, betweeness centrality, clustering analysis and burst analysis, this paper identified and analyzed the research frontiers of data mining discipline from 2007 to 2016.