Search

The study aimed to investigate the presence of some heavy metals in the different used paper tissue paper in the local market, evaluate their types in terms of their safety and highlight the risks arising from the excessive use of anonymous tissue paper. At highlighting the potential damage from the impact of the use of different tissues paper on human health in terms of the probability of the presence of heavy metals in the tissue paper product. The presence of the following metals (Cadmium, Lead, Chromium) war investigated in 20 random samples from the market where seven different types of homemade and imported brands were collected. The concentration of cadmium in all types of samples ranged from (0.21 - 0.05) ppm, where the highest concentration of the cadmium in the sample (A8) and the lowest concentration was in the sample (T4). The concentration of lead in all types of samples ranged from (0.01 - 0.32) ppm where the highest concentration of the lead in the sample (A9) and the lowest concentration was in the sample (A3 / A1). For the samples K2, A11 did not give absorption. The concentration of chromium in all types of samples ranged from (0.07-1) ppm where the highest concentration of the element in the sample (A4) and the lowest concentration were in the sample (A9).

This work reports the fabrication of integrated electrochemical fluidic paper-based analytical devices (ePADs) using a marker pen drawing and screen-printing. Electrodes were deposited on paper using screen-printing with conductive carbon ink. Then, the desired fluidic patterns were formed on the paper substrate by drawing with a commercial hydrophobic marker pen using an inexpensive computer-controlled x-y plotter. The working electrode was characterized by cyclic voltammetry and scanning electron microscopy. The analytical utility of the electrochemical PADs is demonstrated through electrochemical determination of Pb(II) and Cd(II) by anodic stripping voltammetry. For this purpose, the sample was mixed with a buffer solution and a Bi(III) solution, applied to the test zone of the PAD, the metals were preconcentrated as a bismuth alloy on the electrode surface and oxidized by applying an anodic potential scan. The proposed manufacturing approach enables the large-scale fabrication of fit-for-purpose disposable PADs at low cost which can be used for rapid on-site environmental monitoring.

Inorganic salt modified paper substrates were developed and utilized in microfluidic paper based sampling coupled with potentiometric ion sensors for the determination of heavy metals, such as Cd2+ and Pb2+. The application of paper based sampling without any paper substrate pre-treatment were characterized with super Nernstian response, while the paper substrates with inorganic salt pre-treatment were characterized with standard Nernstian response. The application of inorganic salt modified paper substrates was found advantageous when the cation of the salt in the conditioning solution was the same as the primary cations of the ion-selective electrodes (ISEs). A relatively high concentration of inorganic salts during pre-treatment of the paper substrates, namely Cd(NO3)2 or Pb(NO3)2 with subsequent measurement of cadmium(II) and lead(II), by Cd2+- and Pb2+-ISEs, respectively was needed to sustain Nernstian response of sensors. It was also found that paper substrates facilitate sorption of metal ions onto the paper substrates, with stronger binding strength given to Pb2+ over Cd2+. Moreover, the metal-paper interactions suggest concentration dependent sorption-desorption of metal ion, which can have direct limitations of the use of paper based analytics for the determination of low analyte concentration of heavy metals. Nanyang Technological University The authors would like to thank NTU-India Connect Research Internship Program for financial support of Ms Tharini Saravana Sundaram from Coimbatore Institute of Technology, India.

Contamination and associated risks posed by cadmium (Cd) and chromium (Cr) were characterized in the soils being continuously exposed by paper mill waste discharge in Assam, India. Soil samples from 20 (S-1 to S-20) sites surrounding a paper mill were analyzed by sequential extraction technique for Cd and Cr to assess the potential mobility and bioavailability of these heavy metals in the soils. Cadmium was mostly found in its carbonate fraction (37.14%) whereas; Cr was mostly available in Fe-Mn oxide bound fraction (34.72%). Relatively low amounts of Cd and Cr were associated with the water soluble fractions. The pollution load index (P i) values of Cd exceeded the maximum permissible limit i.e. 1 in all the sites but, for Cr it exceeded in all sites but S-7, S-13 and S-16. The mobility factor values ranged from 47.4% to 87.1% for Cd and 12.8–67.2% for Cr. High mobility factor values represent relatively higher biological availability in the soil samples and thus could pose environmental threats in the area surrounding the paper mill. The high values of other contamination factors, viz. individual and global contamination factors, potential ecological risk factor, ecological risk index and geo-accumulation index indicated that the studied area was widely polluted by Cd and Cr as a result of the effluents discharged from the paper mill.

Microfluidic paper-based analytical devices (μPADs) are a versatile and inexpensive point-of-care (POC) technology, but their widespread adoption has been limited by slow flow rates and the inability to carry out complex in field analytical measurements. In the present work, we investigate multilayer μPADs as a means to generate enhanced flow rates within self-pumping paper devices. Through optical and electrochemical measurements, the fluid dynamics are investigated and compared to established flow theories within μPADs. We demonstrate a ~145-fold increase in flow rate (velocity = 1.56 cm s(−1), volumetric flow rate = 1.65 mL min(−1), over 5.5 cm) through precise control of the channel height in a 2 layer paper device, as compared to archetypical 1 layer μPAD designs. These design considerations are then applied to a self-pumping sequential injection device format, known as a three-dimensional paper network (3DPN). These 3DPN devices are characterized through flow injection analysis of a ferrocene complex and anodic stripping detection of cadmium, exhibiting a 5× enhancement in signal compared to stationary measurements.

A colorimetric paper-based enzyme-coupled antimony tin oxide nanoparticle (ATONP) nanobiosensor for selective detection of Cd

With the knowledge of the extent of damage caused by cadmium ions (Cd2+), it becomes imperative to detect the presence of Cd2+ in drinking water with a rapid, efficient, and selective analytical method. Herein, a facile and novel colorimetric method for detecting cadmium ions, based on the irreversible inhibition of horseradish peroxidase (HRP) enzyme was established. Alternatively, a low-cost and affordable paper-based analytical device integrated with a smartphone platform was further designed to visualize, on-site and quantitative detection of Cd2+. The method developed for Cd2+ detection is of great interest to ensure a rapid diagnosis of water quality. Under the optimal conditions, the limit of detection of cadmium ions was 0.1 ppb, which is much lower than the permissible limit of WHO (5 ppb) for human exposure. Interference measurements showed that the method exhibited good selectivity. The proposed method was successfully applied as a rapid screening for cadmium ions monitoring in drinking water.

The fabrication of fully ink-drawn fluidic electrochemical paper-based analytical devices (ePADs) is reported for the determination of trace Pb(II) and Cd(II) by differential pulse anodic stripping voltammetry (DPASV). The fluidic pattern was formed on the paper substrate using an inexpensive computer-controlled x-y plotter and a commercial hydrophobic marker pen. Then, electrodes were deposited on the devices using a second x-y plotting step with a commercial technical pen filled with a graphite-based conductive ink prepared in house. The fabrication parameters of the ePADs were studied by cyclic voltammetry using the ferro/ferri couple as a probe and by scanning electron microscopy. The ePADs, featuring a bismuth nanoparticle-modified working electrode, were applied to the determination of Pb(II) and Cd(II) by DPASV. The chemical and instrumental conditions were studied. The limits of detection were 3.1 μg L

A method is described for simultaneous fluorometric determination of the biomarkers carcinoembryonic antigen (CEA) and prostate specific antigen (PSA) on the same zone of a paper-based immunodevice. Two kinds of CdTe quantum dots, with respective emission peaks at 525 nm and 605 nm under a single excitation wavelength of 272 nm, were used to label the antibodies against CEA and PSA. Then the capture antibodies of CEA and PSA were immobilized on the same zone of the paper-based device. With the difference of the colors of the quantum dot fluorescence (green and orange), CEA and PSA can be detected on the same zone of the paper-based device. By using of sandwich immunoassay format, CEA and PSA can be simultaneously detected in human serum samples with a linear response in the 1.0–40 ng·mL−1 concentration range for both. The recovery rates of the serum sample were in the range of 95–105%. The method has the potential of being applied to the simultaneous determination of various other kinds of substances on a single multichannel paper-based chip.

The paper-disc soil method is a soil algal bioassay used to assess soil water transfer in polluted soils. Although this ecotoxicological method was first established in 2016 to assess soil pollution, quantitative toxicity assessments of Cu- or Ni-treated soil and in situ or ex situ soils polluted with other heavy metals (HMs) have not been widely conducted. In this study, the paper-disc soil method was validated under different test conditions. The validated paper-disc soil method was used to quantitatively investigate the toxicity of four HMs (As, Cd, Cr, and Zn). Based on the results, the test species, initial inoculation concentration in the algal-dispersed solution, water content, light intensity, and exposure duration were proposed as Chlorococcum infusionum, 3 × 10

International audience; The fabrication of a fully bio-sourced adsorbent of Cd(II) by covalent immobilization of quinine on cellulose paper is described. The double bond of commercially available quinine was converted to a terminal alkyne function which was reacted with cellulose paper, chemically modified with azide functions, through a 1,3-dipolar cycloaddition, leading to Cell-Quin. The adsorption efficiency of Cell-Quin was investigated to determine the optimal pH, contact time and dose of adsorbent, ultimately leading to high levels of removal. The mechanism of adsorption of Cell-Quin was deeply rationalized through kinetic experiments and isotherm modeling. We also showed that Cell-Quin could adsorb other heavy metals such as Cu(II), Pb(II), Ni(II) and Zn (II).

Waste Paper Sludge Ash (WPSA) used as stabilizer binder to treat water treatment sludge (WTS). This study was conducted to treat WTS by using WPSA in Solidification/Stabilisation (S/S) technique. 10%, 20%, 30%, 40% and 50% of WPSA was utilized to treat 200g of WTS. 100% of Ordinary Portland Cement (OPC) was used as control specimen. For testing, compressive strength and leaching test on WTS treated with WPSA at specified percentage were performed. It was experimentally done on sample cured at 1, 3, 7 and 28 ages for the compressive strength and at 28 ages for leaching test. Results showed that compressive strength decreases with increasing WPSA content. The immobilization of cadmium (Cd), lead (Pb), nickel (Ni), copper (Cu) and chromium (Cr) were monitored. The concentration of metals decreases with respect to percentage of WPSA added. The optimum content of WPSA to treat WTS was 50%.

We studied the avoidance behaviour of the earthworm Eisenia fetida towards Cd, Cu, and Zn, trace elements (TEs) tested as chloride, nitrate and sulphate salts. Sub adults were exposed individually using dual-cell chambers at 20+2°C in the dark. Recordings were realised at different dates from 2h to 32h. We used filter paper and extruded water agar gel as exposure media to evaluate the contribution of the dermal and the digestive exposure routes on the avoidance reactions. Exposures to Cu or Cd (10mgmetal ionL(-1)) resulted in highly significant avoidance reactions through the exposure duration. Worms avoided Zn poorly and reactions towards Zn salts varied along the exposure. Worm sensitivity towards TEs differed between salts and this could result from differential toxicity or accessibility of these TE salts to earthworms. The anion in itself was not the determinant of the avoidance reactions since exposures to similar concentrations of these anions using calcium salts did not result in significant avoidance worm behaviour. Avoidance responses towards TEs were higher in the case of water agar exposures than in filter paper exposures. Thus, dermal contacts with TE solutions would elicit worm avoidance but signals from receptors located inside the digestive tract could reinforce this behaviour. The use of extruded water agar gels as the substrate allows checking the real sensitivity of earthworm species towards TEs since the TE concentrations leading to significant avoidance reactions were below those reported in the literature when using TE-spiked soils.

A portable device is conducive to the on-site detection of heavy metal ions at trace level in food and the prevention of related food safety issues. In this work, an electrochemical device stacked up with flat electrodes was developed for the detection of Pb

Instrument-free, portable and direct read-out mini-devices have wider application prospects in various fields, especially for real-time/on-site detection in environmental science. Herein, a colorimetric fluorescent sensor for detecting cadmium ions (Cd2+) based on aggregation-induced emission (AIE) was established, fluorescent paper strips integrated with smartphone platform was further designed for the visualization, on-site and quantitative detection of Cd2+. The colorimetric fluorescent sensor was prepared by mixing orange emission glutathione-stabilized gold nanoclusters (AuNCs) with blue emission ethylenediamine functionalized graphene oxide (EDA-GO), and introducing copper ions (Cu2+) to quench the orange emission of AuNCs while the blue emission served as a background reference without color change. The Cd2+ can induce Cu2+-GSH-AuNCs to aggregation and emit orange fluorescence, causing the fluorescent color of the sensor changed from blue to red with the limit of detection (LOD) as low as 33.3 nM in solution. Moreover, fluorescent paper strips integrated with smartphone platform has a sensitive detection of Cd2+ with the LOD of 0.1 μM in rice samples. The method reported here might have great application prospects in real-time monitoring of foods safety and environmental protection.

Leachate wastewater from pulp and paper industry is known for containing various types of heavy metals such as Cd (Cadmium), Ba (Barium) and Cu (Cuprum). The existence of heavy metals that accumulates and eventually exceeds certain threshold concentrations will cause environmental pollution, therefore it is necessary to conduct wastewater treatment to eliminate or at least reduce the heavy metal content in industrial wastewater. One of the most commonly used wastewater treatment method is using adsorbent, this study uses adsorbent made from the mixture of clay, zeolite and activated carbon formed into ceramic balls with ± 0.5 cm diameter. The ratios of the mixture of clay, zeolite and activated carbon are 6:3:1; 6:2,5:1,5; 6:2:2; 6:1,5:2,5 and 6:1:3 with variations of contact time 30, 60, 90, 120 and 150 minutes. The most favorable concentration reduction of heavy metals occurred at the longest contact time of 150 minutes at 6:3:1 adsorbent ratio, Cd concentration decreases from 0.65 mg/L to 0.03 mg /L, Ba concentration decreases from 0.86 mg/L to 0.04 mg/L and Cu concentration is from 0.6 mg/L to 0.02 mg/L. These prove that the ceramic zeolite/carbon-ceramic composite adsorbent can be an alternative to treat wastewater containing heavy metals derived from the pulp and paper industry.

A disposable electrochemical lateral flow paper-based sensing device for heavy metal detection is proposed. The quantification of lead and cadmium in aqueous samples is demonstrated in a range from 10 to 100 ppb with a limit of detection of 7 and 11 ppb respectively. Moreover, the platform itself, which is made of paper, served as a sample pretreatment material due to its filtering properties. Real samples, especially in which the matrix is usually turbid and would in principle need a previous filtration, are successfully analyzed. This lab-on-paper device is simple, low cost, easy to fabricate, and portable, being a promising tool for new point-of-care applications in environmental monitoring, public health, and food safety.

Disposal of paper mill effluent is a problem. A study was undertaken to determine the potential of an agro-residue-based paper mill effluent as an alternative of irrigation water on spinach (Spinacia oleracea L), var. Hybrid-7. The study was conducted during the rainy (July to October) and winter (November to February) seasons of 2011 and 2012. Doses of paper mill effluent of 5%, 10%, 25%, 50%, 75%, and 100% were used along with bore well water (control). Paper mill effluent increased electrical conductivity (EC), pH, organic carbon (OC), total Kjeldahl nitrogen (TKN), calcium (Ca2+), iron (Fe2+), potassium (K+), magnesium (Mg2+), sodium (Na+), phosphate (PO43−), sulfate (SO42−), cadmium (Cd), chromium (Cr), copper (Cu), manganese (Mn), and zinc (Zn) of soil in both seasons. There were no changes in soil water-holding capacity and bulk density due to fertigation. Agronomic performance of S. oleracea increased due to treatment with 5% to 25% paper mill effluent and decreased due to treatment with 50 to 100...

Recycled paper is an important raw material to provide sustainability of natural resources and reduce the environmental impact of the use of paper from recycled pulp in the packaging industry. Hence, recycled paper production is higher in terms of volume and utilization. Recycled paper products are used in the packaging industry partially or fully. Such usage leads to the presence of heavy metals due to recycled and chemical additive sources. The present study aims at determining the amounts and also identifying the sources of heavy metals such as Pb, Cd, Zn, Ni, and Cu contained in recycled testliner (TL) and fluting (FLT), which are main products used in production of corrugated cardboard. The metals in the structure of the paper used in packages directly or indirectly in contact with foods are heavy metals. Mean values of 2.6 mg kg-1 Pb (lead), 2.8 mg kg-1 Zn (zinc), 0.094 mg kg-1 Cd (cadmium), 1.8 mg kg-1 Ni (nickel), and 25.4 mg kg-1 Cu (copper) were detected in test liner and fluting papers using inductively coupled plasma optical emission spectrometry (ICP-OES). The main sources of heavy metals are colorants, mainly consisting of conventional paint and pigments as well as spot and Pantone Matching System (PMS) colorants.

Effluents from industries contain appreciable amount of metallic cations like zinc, copper, iron, manganese, lead and cadmium. Release of heavy metal without proper treatment poses a significant threat to public health because of its persistence biomagnifications and accumulation in food chain. To reduce metal pollution problems many processes have been developed for the treatment and disposal of metal containing wastes. Certain plants have the ability to accumulate heavy metals such as Pb, Cr, Cd and Zn. At present, phytoremediation of metals may be approaching commercialization. Hence, possibility can be explored to remove heavy metal load, present even in low concentration, in waste water of paper mill effluent soil by using Croton sparsiflorus.

The purpose of this study is to promote utilization of paper mill sludge as an adsorbent for stabilizing heavy metals in contaminated water by measuring the adsorption capacity of paper mill sludge for cadmium and arsenic. To measure adsorption capacity of paper mill sludge, sorption isotherm experiments were analyzed by Langmuir and Freundlich isotherm models. Also, two methods of chemical modifications were applied to improve the adsorption capacities of paper-mill-sludge: the first method used sodium hydroxide (NaOH), called PMS-1, and the second method used the NaOH and tartaric acid (C4H6O6) together, called PMS-2. For Cd adsorption, PMS-1 presented the increase of reactivity while PMS-2 presented the decline of reactivity compared to that of untreated paper-mill-sludge. In case of As adsorption, both PMS-1 and PMS-2 showed the decrease of adsorption capacities. This is because zeta-potential of paper mill sludge was changed to more negative values during chemical modification process due to the hydroxyl group in NaOH and the carboxyl group in C4H6O6, respectively. Therefore, we may conclude that the chemical treatment process increases adsorption capacity of paper mill sludge for cation heavy metals such as Cd but not for As.

Chemicals are used in materials as additives in order to improve the performance of the material or the production process itself. The presence of these chemicals in recyclable waste materials may potentially affect the recyclability of the materials. The addition of chemicals may vary depending on the production technology or the potential end-use of the material. Paper has been previously shown to potentially contain a large variety of chemicals. Quantitative data on the presence of chemicals in paper are necessary for appropriate waste paper management, including the recycling and re-processing of paper. However, a lack of quantitative data on the presence of chemicals in paper is evident in the literature. The aim of the present work is to quantify the presence of selected chemicals in waste paper derived from households. Samples of paper and board were collected from Danish households, including both residual and source-segregated materials, which were disposed of (e.g., through incineration) and recycled, respectively. The concentration of selected chemicals was quantified for all of the samples. The quantified chemicals included mineral oil hydrocarbons, phthalates, phenols, polychlorinated biphenyls, and selected toxic metals (Cd, Co, Cr, Cu, Ni, and Pb). The results suggest large variations in the concentration of chemicals depending on the waste paper fraction analysed. Research on the fate of chemicals in waste recycling and potential problem mitigation measures should be focused on in further studies.

Cadmium ion (Cd (II)) is a highly toxic heavy metal usually found in natural water. Exposure to Cd (II) can produce serious effects in human organs such as Itai-Itai disease. Therefore, the maximum allowance levels of Cd (II) in drinking water and herbal medicines imposed by the World Health Organization (WHO) are 3 μg L

The JK Paper industry located at Rayagada discharges biologically untreated effluent more than the permissible limit prescribed by Pollution Control Board, Odisha in to the environment. The industry is seriously polluting the surrounding aquatic and terrestrial environment. No detailed intensive study was carried out by previous workers on this industry earlier. The present study aims at finding out the impact of effluent on the flora at the contaminated site. The chemically treated effluent (TE) contained significant amount of mercury and cadmium. The TE has high BOD, COD, dissolved solids and suspended solids when compared to normal river water at the site of discharge. The TE deteriorated the natural water bodies changing the physico-chemical properties of natural river water. After meeting the river water the TE was diluted after 1 km distance from the meeting point of the river. Crop plants collected from the contaminated site showed higher level of residual Hg and Cd and significant depletion in pigment was observed. Plants collected from both the sides of the treated effluent canal showed significant amount residue mercury and cadmium in the plant leaves. The plants exposed to the TE, showed variation in chlorophyll and Phaeophytin pigment content when compared to their respective control values in all terrestrial plants collected from the contaminated site. In some plant leaves little increment in the pigment level was noted but the values were not significant. The changes observed in the plant pigment might be due to heavy metal accumulation. The presence of residual Hg and Cd in crop plants and plant leaves grazed by grazing animals after absorption, accumulation and enrichment may lead to a possible biological magnification, warrants attention. Proper biological treatment, treatment of effluent by modern methods and removal of heavy metals from the effluent before discharge by the industry is suggested.

Heavy metals are among the major contaminants of vegetables. A study was conducted at Wonji Gefersa farms where paper wastewater is used for cultivation of vegetable crops. Four vegetable samples, namely Swiss chard, carrot, tomato, green pepper, as well as paper wastewater were examined for heavy metal [Lead (Pb), Zinc (Zn), Cadmium (Cd), Iron (Fe), Copper (Cu), Chromium (Cr) and Cobalt (Co)] contamination using atomic absorption spectroscopy. The levels of Pb, Cd and Cr in paper wastewater were all above the safe limit for FAO standards for wastewater quality for irrigation. The concentration of Pb in Swiss chard and Green peeper was exceeded the permissible limits. The study reveals that Pb metal contamination in the study area which poses health risk with time unless an urgent step is taken by relevant agencies to address this issue.

Low cost disposable working electrodes are specifically desired for practical applications of electrochemical detection considering maturity of electrochemical stations and data collection protocols. In this paper double-sided conductive adhesive carbon tape with nanostructure was applied to fabricate disposable working electrodes. Being supported by indium tin oxide glass, the prepared carbon tape electrodes were coated with bismuth film for stripping analysis of heavy metal ions. By integrating the bismuth modified electrodes with paper-based analytical devices, we were able to differentiate Zn, Cd and Pb ions with the sample volume of around 15 μL. After the optimization of parameters, including modification of bismuth film and the area of the electrodes, etc., Pb ions could be measured in the linear range from 10 to 500 μg/L with the detection limit of 2 μg/L. Our experimental results revealed that the disposable modified electrodes could be used to quantify migrated lead from toys with the results agreed well with that using atomic absorption spectrometry. Although bismuth modification and stripping analysis could be influenced by the low conductivity of the carbon tape, the low cost disposable carbon tape electrodes take the advantages of large-scaled produced double-sided carbon tape, including its reproducible nanostructure and scaled-up fabrication process. In addition, the preparation of disposable electrodes avoids time-consuming pretreatment and experienced operation. This study implied that the carbon tape might be an alternative candidate for practical applications of electrochemical detection.

Theincreasing of demand of pulp and paper products, will following with the growing the pulp and paper industryand generate significant mill waste. The total waste reached 1/3 of the amount raw materials used and ash boiler is the waste with the largest percentage of 52%. For that it takes effort to manage the existing waste. The boiler ash contained the chemical elements, it can be utilized such as fertilizer, because it also contains transition metals in form of heavy metal such as Cadmium (Cd), Cobalt (Co), Chrome (Cr), Cupprum (Cu), Ferrum (Fe), Nickel (Ni), and Zinc (Zn), the use of boiler ash must follow the threshold specified by the Government. Several studies have been undertaken to reduce and extract heavy metals from ash and sand of the boiler by using carbon dioxide as its ligand. Eelectrochemical method was used to remove and recovery of heavy metals from the incenerator. This study focused on removal of heavy metals using Lauryl Amine as collector and three solvents namely Dichloromethane, Ethanol and n-Hexane. The treatmentswas able to extract the heavy metal and generally reduce the heavy metal content of ash boiler pulp and paper mill waste. The combination treatment used toreduce the heavy metal content of 5 gram Lauryl Amine collector in Dichloromethane solvent for 4 hours process time.

Blood being a vehicle for the transport of industrial pollutants in living system, fish hematology is considered as potent biomarker. In the present study, we investigated respective sublethal effects of pulp and paper mill effluents on hematology of two commonly cultured carps, Cyprinus carpio and Ctenopharyngodon idella, using optical, scanning electron microscopy and energy-dispersive X-ray spectroscopy. Irrespective of species, results showed significant decrease in erythrocyte, hematocrit and hemoglobin contents while an increase in white blood cell counts (P

Both glutathione capped CdTe quantum dots (QDs) and enzymes were encapsulated with poly(diallyldimethylammonium chloride) (PDDA) via electrostatic attraction to form hybrid films. The obtained PDDA QD-enzyme hybrids feature both high fluorescence and biorecognition. In the obtained hybrid materials, the fluorescence emission of the QDs was stable for at least 3 months, and the structure and activity of the enzyme was also well maintained as the Michaelis constant of tyrosinase was determined to be 0.90 mmol/L, which is just 2 times higher than that of free enzyme. This hybrid material was then utilized as a platform for the development of biosensors based on the quenching effects of the enzymatic products on the emission of the QDs with a kind of phenol (catechol) and glucose as example analytes. The detection limits of catechol and glucose were 1.0 × 10(-5) and 5.0 × 10(-6) mol/L, respectively. Moreover, this hybrid material was applied to the fabrication of test paper for these two analytes. The test paper was very stable with respect to the fluorescence of the QDs and the activity of the enzyme maintained for at least 1 month.

An engineered biochar was fabricated via paper mill sludge pyrolysis under CO2 atmosphere, and its adsorption capability for As(V) and Cd(II) in aqueous solution was evaluated in a batch mode. The characterization results revealed that the biochar had the structure of complex aggregates containing solid minerals (FeO, Fe3O4 and CaCO3) and graphitic carbon. Adsorption studies were carried out covering various parameters including pH effect, contact time, initial concentrations, competitive ions, and desorption. The adsorption of As(V) and Cd(II) reached apparent equilibrium at 180min, and followed the pseudo-second-order kinetics. The highest equilibrium uptakes of As(V) and Cd(II) were 22.8 and 41.6mgg-1, respectively. The adsorption isotherms were better described by Redlich-Peterson model. The decrease in As(V) adsorption was apparent with the increase in PO43- concentration, and a similar inhibition effect was observed for Cd(II) adsorption with Ni(II) ion. The feasibility of regeneration was demonstrated through desorption by NaOH or HCl.

The paper production is material intensive and generates enormous quantity of wastewater containing organic pollutants and heavy metals. Present study demonstrates the feasibility of constructed wetlands (CWs) to treat the heavy metals from pulp and paper industry effluent by using vertical flow constructed wetlands planted with commonly available macrophytes such as Typha angustifolia, Erianthus arundinaceus, and Phragmites australis. Results indicate that the removal efficiencies of the planted CWs for iron, copper, manganese, zinc, nickel, and cadmium were 74, 80, 60, 70, 71, and 70 %, respectively. On the other hand, the removal efficiency of the unplanted system was significantly lower ranging between 31 and 55 %. Among the macrophytes, T. angustifolia and E. arundinaceus exhibited comparatively higher bioconcentration factor (10(2) to 10(3)) than P. australis.

We successfully absorbed the copper ion (Cu2+) and cadmium ion (Cd2+) from alkaline aqueous solutions using the prepared chitosan-tannin (CTS/TA) functional paper as absorbent materials. The kinetics of the adsorption, the adsorption isotherms, and the influence of the solution flow rate and pH were investigated detailly. The adsorption data were described well by Langmuir isotherms, with maximum copper (Cu2+) and cadmium (Cd2+) adsorption capacities of 684.93 and 813.01 mg/m2, respectively. The experimental results also showed that the adsorption of these heavy metals was selective in the order of Cu2+ > Cd2+, as Cu2+ competed with Cd2+ for bonding sites at solution concentrations greater than or equal to 200 mg/L. The results of this study illustrated that the chitosan-tannin functional paper materials mainly followed a complexation-adsorption model, and the best adsorption capacity was achieved at pH = 9. The desorption of heavy ions from this adsorbent and its reusability of functional paper was also involved. Therefore, this novel, environment-friendly functional paper can surely act as an effective adsorbent for the removal and recovery of heavy metals in alkaline aqueous solutions.

Paper mill sludge (characterized by 29.0% of organic substances such as cellulose, lignin and tannins and 71.0% of inorganic substances such as kaolinite and carbonates) was studied in a mixture with soil in order to evaluate its effects on soil capability for retaining heavy metals. Attention was focused on cadmium and lead sorption and two parameters were investigated, the contact time of paper mill sludge–soil mixture and the paper mill sludge–soil ratio in the mixture. Results showed that paper mill sludge and soil interact to form ‘new’ sorbing sites. Taking into account sorption results of lead, the retention of which by soil is substantially increased by sludge addition, can highlight this modification. Also, the amount of sorbed cadmium was increased by sludge addition.

A five-stage sequential extraction procedure was used to determine the distribution of 11 metals (Cd, Cr, Cu, Mo, Pb, Zn, As, Co, V, Ni, Ba), and sulphur (S) in bottom ash and in fly ash from a fluidized bed co-combustion (i.e. wood and peat) boiler of Stora Enso Oyj Oulu Mill at Oulu, Northern Finland, into the following fractions: (1) water-soluble fraction (H2O); (2) exchangeable fraction (CH3COOH); (3) easily reduced fraction (NH2OH—HCl); (4) oxidizable fraction (H2O2 + CH3COONH 4); and (5) residual fraction (HF + HNO3 + HCl). Although metals were extractable in all fractions, the highest concentrations of most of the metals occurred in the residual fraction. From the environmental point of view, this fraction is the non-mobile fraction and is potentially the least harmful. The Ca concentrations of 29.3 g kg—1 (dry weight) in bottom ash and of 68.5 g kg— 1 (dry weight) in fly ash were correspondingly approximately 18 and 43 times higher than the average value of 1.6 g kg— 1 (dry weight) in arable land in Central Finland. The ashes were strongly alkaline pH (∼ 12) and had a liming effects of 9.3% (bottom ash) and 13% (fly ash) expressed as Ca equivalents (dry weight). The elevated Ca concentrations indicate that the ashes are potential agents for soil remediation and for improving soil fertility. The pH and liming effect values indicate that the ashes also have a pH buffering capacity. From the environmental point of view, it is notable that the heavy metal concentrations in both types of ash were lower than the Finnish criteria for ash utilization.

The distribution of DTPA-extractable Cd, Ni and Zn in four profile samples collected from areas contaminated with wastes from tannery, city sewage, pharmaceutical and paper mills located at different places in Bangladesh was investigated. Soil samples were analysed for the total and their DTPA-extractable metal contents. The total concentration of metals in the soil horizons ranged from 0.07 to 0.62 mg kg−1 for Cd, 31 to 54 mg kg−1 for Ni and 59 to 838 mg kg−1 for Zn, respectively. These metal concentrations were highest in the surface and lowest in the subsurface horizons. This trend was also observed for the DTPA-extractable amounts of these metals. The relative extractability, expressed as the ratio of DTPA to total contents (aqua regia-extractable) was 33 to 46% for Cd, 2 to 10% for Ni and 3 to 28% for Zn, respectively, in the A1 horizon, while in the B and C horizons the ratios decreased gradually as did total concentration, indicating that metal contamination was primarily limited to the su...

The purpose of this paper is to identify the nest materials, some physical characteristics and the elemental composition of the nest of Dolichovespula saxonica (Fabricius, 1793). The nest surfaces were observed with a stereomicroscope and scanning electron microscope (SEM). In the inner surface of the D. saxonica nest the medium thickness of the fibers in the envelope and comb varied between 7.14 and 26.9 μm, respectively and averaged 16.4 μm. In the outer surface of the nest the medium thickness of the fibers in the envelope and comb were between 3.52 and 5.70 μm, respectively and averaged 4.63 μm. The nitrogen concentration of the nest of D. saxonica was 0.616% and the amount of protein was 3.08%. The percentages of the fibers, saliva, oil and the water absorption capacity were calculated as 67–70%, 23–30%, 12–18% and 110–140%, respectively. However, the amount of the element Cadmium (Cd) in the nest was found to have a value of 0.2 ppm. The major compounds of wasp nests are plant fibers, saliva and oil. However, the concentrations and ratios of the nest material compounds depend on the plant variety, place of origin, and time of harvest as well as on the processing and saliva conditions. The colors of the nest are beige, cream and grey with long dark brown lines. As a result of our study, we have found that the rates and quantities of physical characteristics, elemental composition and the fibers in the envelope and comb of the nest of D. saxonica change with environmental conditions.

Paper sludges were traditionally landfilled or burned. Over the years, the use of paper sludges on soils has increased, as well as the concerns about their environmental effects. Therefore, the chemical characterization of paper sludges and their young (immature) compost needed to be investigated, and over 150 inorganic and organic chemicals were analyzed in de-inking paper sludge (DPS). In general, nitrogen, phosphorus and potassium contents were low but variable in raw DPS and its young compost. The contents of arsenic, boron, cadmium, cobalt, chromium, manganese, mercury, molybdenum, nickel, lead, selenium, and zinc were also low and showed low variability. However, the copper contents were above the Canadian compost regulation for unrestricted use and required a follow-up. The fatty- and resin acids, and polycyclic aromatic hydrocarbons were the organic chemicals measured at the highest concentrations. For resinic acids, care should be taken to avoid that leachates reach aquatic life. For polycyclic aromatic hydrocarbons, naphthalene should be followed until soil content reaches 0.1 microg g(-1), the maximum allowed for soil use for agricultural purposes according to Canadian Environmental Quality Guidelines. In young compost, the concentration of these chemical families decreased over time and most compounds were below the detection limits after 24 weeks of composting. In raw DPS, among the phenol, halogenated and monoaromatic hydrocarbons, dioxin and furan, and polychlorinated biphenyl families, most compounds were below the detection limits. The raw DPS and its young compost do not represent a major threat for the environment but can require an environmental follow-up.

Paper-based ion-selective electrodes (ISEs) are simple, flexible, and cost-efficient in comparison to conventional solid-contact ISEs. Yet, paper-based ISEs have poor limits of detection (in the micromolar range) relative to conventional solid-contact ISEs. Here we describe the construction and optimization of ISEs based on commercially available filter paper modified with single-walled carbon nanotubes (SWCNTs), sputtered gold, and conductive polymer poly(3-octylthiophene) to support an ion-selective membrane. The ion-selective membrane presented here is based on the copolymer methyl methacrylate-decyl methacrylate (MMA-DMA). The copolymer MMA-DMA is highly water-repellent and has a low coefficient of diffusion, which makes it particularly suitable for the creation of sensors with high performance in reaching low limits of detection. Three different configurations of the electrodes have been characterized by using contact angle surface analysis, oxygen influence, and testing for the presence of a water layer. Paper-strip ISEs for cadmium, silver, and potassium ions were developed with groundbreaking limits of detection of 1.2, 25.1, and 11.0 nM, respectively. In addition to such low limits of detection, paper-strip ISEs display high selectivity for their ion of interest and high reproducibility.

Cadmium (along with Fe(II), Co(II), Zn(II), and Pb(II) ions) decreases the rate of oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) with KIO4 conducted either without or with Mn(II) as a catalyst. Cadmium(II) is preconcentrated from aqueous solutions on silica plates or paper filters physically modified with a reagent for selective determination of Cd(II), namely 1-[(6-bromo-2-benzothiazolyl)azo]-2-naphthol (bromobenzothiazo, or BBT). The modifier is strongly retained on the both supports at pH 6-10 and does not affect the inhibiting effect of Cd(II) in the indicator reaction. Cadmium is determined by its inhibiting action directly on the sorbents by measuring transmittance (BBT/paper) or reflectance (BBT/silica) with limits of detection of 2 x 10(-4) and 0.03 mg/L, respectively. The proposed hybrid combination of sorption with catalytic detection on the sorbent allows to increase the selectivity factors several times (up to 2 orders) relatively to the determination in solution. Tap water samples and soil extracts were analyzed.

The authors of the title paper (J. Mol Struc. 1204 (2020) 127,457) claim to have grown a so-called ‘Cadmium (II) dibromide l - Proline monohydrate’ (CBLPM) crystal by the slow evaporation method and studied its crystal structure by Rietveld refinement technique. In this comment, many points of criticism, concerning the crystal growth, Rietveld refinement, spectra and theoretical study of the so called CBLPM crystal are highlighted.

Nowadays, the development of systems, devices, or methods that integrate several process steps into one multifunctional step for clinical, environmental, or industrial purposes constitutes a challenge for many ongoing research projects. Here, we present a new integrated paper based cadmium (Cd 2+) immunosensing system in lateral flow format, which integrates the sample treatment process with the analyte detection process. The principle of Cd2+ detection is based on competitive reaction between the cadmium-ethylenediaminetetraacetic acid-bovine serum albumin-gold nanoparticles (Cd-EDTA-BSA-AuNP) conjugate deposited on the conjugation pad strip and the Cd-EDTA complex formed in the analysis sample for the same binding sites of the 2A81G5 monoclonal antibody (mAb), specific to Cd-EDTA but not Cd2+ free, which is immobilized onto the test line. This platform operates without any sample pretreatment step for Cd2+ detection thanks to an extra conjugation pad that ensures Cd2+ complexation with EDTA and interference masking through ovalbumin (OVA). The detection and quantification limits found for the device were 0.1 and 0.4 ppb, respectively, these being the lowest limits reported up to now for metal sensors based on paper. The accuracy of the device was evaluated by addition of known quantities of Cd2+ to different drinking water samples and subsequent Cd2+ content analysis. Sample recoveries ranged from 95 to 105% and the coefficient of variation for the intermediate precision assay was less than 10%. In addition, the results obtained here were compared with those obtained with the well-established inductively coupled plasma emission spectroscopy (ICPES) and the analysis of certificate standard samples. © 2013 American Chemical Society., MICINN (Spain) for MAT2011-25870 and PIB2010JP-00278 projects are acknowledged. A.M.L.M. thanks the Generalitat of Catalunya for the FI-2010 scholarship. D.A.B. thanks the U.S. National Science Foundation (OISE-1253272) for partial support of this work.

Earthworms are ideal soil organisms for use in terrestrial ecotoxicology. As such, several earthworm protocols have been developed for testing toxic potential of chemicals and contaminated soils. Of these, the 48-h filter paper contact (FP) and the 14-d artificial soil exposure (AS) protocols, using mortality (LC50) as the toxic endpoint and Eisenia fetida as the test species, have received the most attention, with the latter being adopted by both OECD and EEC in Europe and the Environmental Protection Agency (USEPA) in the United States. Although the FP technique, adopted by EEC, provides for inexpensive reproducible toxicity screening for chemicals (i.e. establishing relative toxicities), it has been criticized for lacking the ecotoxicological relevance of the AS protocol. Choice of earthworm species for laboratory testing also has been controversial. The manure worm, E. fetida, is criticized for not being sufficiently sensitive to chemicals or representative of {open_quotes}typical{close_quotes} earthworms. Lumbricus terrestris and Apporectodea caliginosa have been suggested as more sensitive and ecologically relevant earthworms by Dean-Ross and Martin, respectively. This paper compares the AS and FP protocols in assessing toxicity of cadminum to L. terrestris and E. fetida using LC50s and LC50s. 19 refs., 2 tabs.

In a recent publication, Srinivasan and Gobre [1] commented on our research findings [2] . In this letter to Editor, I wish to respond to the comments.

Laboratory experiments were conducted to investigate the reduction of pollution load of paper mill effluent through phytoremediation technique using water caltrop (Trapa natans). Different concentrations, viz. 0% (control), 25, 50, 75, and 100% (absolute) were treated using T. natans for 60 days. Results showed that sewage effluent was loaded with various parameters, viz. total dissolved solids (TDS), electrical conductivity, total Kjeldhal nitrogen (TKN), phosphate ($ {\text{PO}}_{4}^{3- } $), calcium (Ca2+), magnesium (Mg2+), potassium (K+), cadmium (Cd), copper (Cu), iron (Fe), nickel (Ni), lead (Pb), and zinc (Zn). The maximum removal of different parameters was recorded after 60 days of phytoremediation experiments. Water caltrop (T. natans) significantly (p

The present study on heavy metal contamination in soil and their accumulation in edible part (leaves) and roots of Spinacia oleracea (Spinach) on irrigation with paper mill effluent (PME)/sewage revealed that there was significant increase in the nickel (Ni, +227.17 %) content of the soil irrigated with PME, whereas in the soil irrigated with sewage chromium (Cr, +274.84 %), iron (Fe, +149.56 %), and cadmium (Cd, +133.39 %), contents were increased appreciably. The value of enrichment factor (EF) for Ni (3.27) indicated moderate enrichment in PME-irrigated soil. The EF of Fe, zinc (Zn), Cd, and Cr were