Search

The fibre characteristics of five Spondia mombin stands were studied to determine their suitability for pulp and paper production. Wood slivers obtained parallel to grain at three (3) different positions along the bole were macerated in combined identical amounts of glacial acetic acid plus hydrogen peroxide under heat at between 80-100o C. Macerated fibres were washed clean of mixture and mounted on slide for microscopic examination of fibre characteristics. Completely Randomized Design (CRD) was employed for the experiment. Data were analysed using one-way Analysis of Variance (ANOVA) while, the Duncan’s Multiple Range Test (DMRT) was used to separate means of significant differences among the treatments. Results show that significant differences existed in fibre characteristic of sampled trees, however the fibre length ranged from 0.98-1.0 mm, fibre diameter (18.22-21.47 um), lumen width (10.90-12.98 um) and cell wall thickness (3.86-4.60 um). Significant differences were also observed among the derived fibre characteristics, the Runkel ratio ranged from 0.66-8.89, elasticity coefficient (57.22-60.50 %), coefficient of rigidity (19.78-22.24 %), slenderness ratio (43.27-46.5). This implied that, the fibres of S. mombin were short and elastic which make the wood species an appropriate raw material for pulp and paper making especially when blended with other long fibre species.

Perforation is used in multilayer tissue products, such as toilet and kitchen papers, as part of the converting process. Perforation facilitates the detachment of consecutive sheets by the user. The compromise between the strength required to detach a perforated sheet and the strength required to break a sheet affects the perforation efficiency. In this work, the mechanical behaviors of 15 commercial papers from different European producers were studied. A morphological analysis of the materials was performed, followed by the determination of their perforation efficiency (through tensile tests). A qualitative analysis of the cuts quality, along with a quantitative analysis of the same cuts dimensions was performed through an optical system. Finally, the stress concentration in the holes and the influence of the cuts distance were analyzed using a finite element model implemented in Abaqus/Standard finite element software. The results showed that a cut distance of 2.0 mm should not be used in these types of papers, and the perforation efficiency increased with the cut distance, regardless of the number of plies in the toilet paper. The stress concentration factor was also determined to have a limit value of 0.11. Papers above this limit value tear at the perforation line, as desired.

High demands for trees as the raw material of paper can disrupt the stability of the environment. It is necessary to find alternatives from other materials which are more environmentally friendly. This study aims to determine the quality of paper made from combining sugarcane bagasse with cassava peels or with corn husks using PVAc or tapioca starch adhesives. A completely randomized 2 x 2 factorial design with five times replication was used. The parameters tested were the tensile and tear resistance of the paper using a micrometer and a universal testing machine. A sensory analysis from panelists was also conducted. The combination of J1P1 produced a paper with the highest tensile strength (11.30 MPa) and the highest tear strength (1.82 MPa). The combination of J2P2 produced a paper with the lowest tensile strength (10.35 MPa) and the lowest tear strength (1.62 MPa). Variance analysis showed that the type of adhesive used showed a significant result on both tensile and tear resistance but material choices and interaction between materials and adhesive choices was not significantly different from the result on both tensile and tear resistance. Sensory testing shows that the combination of J1P1 was preferred the most. It can be concluded that the combination of J1P1 appeared to be the best combination.Keywords: Handmade paper, sugarcane bagasse, cassava peels, corn husk, PVAc tapioca starch, adhesive

This research is an analysis of quality control process on paper production on the soft roll production process of Bel Papyrus Ltd located in Ogba, Lagos State, Nigeria. The research was done with the aim of determining the conformity of the industry’s product to quality standard, identifying and eliminating the possible causes of variation in their production process, with reference to Percentage Elongation. The researchers used primary data in form of periodic laboratory test result done on soft rolls.Data presentations were made using simple statistical tools like Mean, Ranges, Standard Deviations, and Tables reflecting the primary data obtained at equal interval of production. The researchers made use of variable control charts for the purpose of analysis. The

Our dependency towards wood has reduced the number of forests especially in Indonesia. Hence, many people tried to use another material as a replacement of wood. One of them is composite. Department of Industrial Engineering Universitas Sebelas Maret has developed paper-based composite using newspaper waste in Praktikum Perancangan Teknik Industri (PPTI) II. Unfortunately, the quality of composite is not so good. This paper tried to understand the effect of factors to responses and discover the best combination of factors to obtain the best responses. The responses of this experiment are tensile strength, bending strength and impact value. The factors of this experiment are paper pulp, PVAc glue and water. Taguchi method is used to find the appropriate orthogonal array and Particle Swarm Optimization method to find the optimum combination of the factors. Orthogonal array used in this experiment is L9 (34). Through analysis, all of the factors are significant to tensile and bending strength, but they are not significant to impact value. The best combination of factors is 175 grams paper pulp, 130 grams PVAc glue and 175 ml water. Optimum results obtained for tensile strength is 0.7595 N/mm2, bending strength is 4.873 N/mm2 and impact value is 0.0138 J/mm2.

In China, Xuan paper has been the paper of choice as artwork support and for conservation, for several centuries. However, little is known about its material properties, especially given the many grades of sized and unsized Xuan paper. In addition, there is a lack of information on its degradation. In this research, a selection of contemporary unsized Xuan papers was investigated, representing diverse raw materials. Seven out of twelve contemporary unsized Xuan papers were determined to be approximately neutral and contain > 2% alkaline reserve, indicating good durability. Viscometry was used to determine the degree of polymerisation (DP) as none of the samples gave significant reactions to the phloroglucinol spot test. The average DP of ten contemporary unsized Xuan papers is ~ 1700, excluding two papers that have presumably been sun-bleached, and that exhibit significantly lower DP. Using X-ray fluorescence, it can be demonstrated that Ca and Si are the dominant elements and interestingly, Ca content is directly correlated with ash content and with alkaline reserve. Accelerated degradation was performed at two sets of environmental conditions, i.e. 90 °C, 30% RH and 60 °C, 70% RH, and the established degradation rates agreed with the Collections Demography model of paper degradation meaning that degradation of Xuan papers proceeds in the same way as other types of paper. This research gives fundamental insights into contemporary unsized Xuan papers, which exhibit good stability during accelerated degradation despite the low starting DP in the context of the samples used in this study. Our findings may inform methods of Xuan paper production, selection of Xuan paper for conservation purposes, as well as preventive conservation of Xuan paper-based artefacts.

Uzbekistan is bare of forests and it takes the fifth place in the world in terms of cotton production, and the third place in terms of silk production after China and India. According to the government program the expansion of the land area for mulberry plantations boosts the growth of silk production causing an increase in the total amount of wastes, i.e. branches of mulberry trees industrially useless after the removal of leaves. Their use as a raw material for the cellulose pulp production is relevant, since it is aimed at solving not only the resource, but also the environmental problem. The bark was cut off from the mulberry branches and soaked in water for some time after which its exterior hard layer was scraped off and divided into the rough exterior layer and the softer inner layer. The inner layer was boiled for several hours. The boiled bast, after washing with water, was grinded in a laboratory grinding machine under the following conditions: mass concentration – 1 %, temperature – 22 °С. A given amount of lint cotton cellulose (grinding degree – 45 °SR) was added to the grinded bast. Paper molds with the mass of 80 g/m2 were obtained in laboratory conditions using a sheet-making apparatus. It was found out that the obtained paper that contains cotton cellulose pulp and inner layer of mulberry branch bark has low whiteness which depends on whiteness of the added fibers. It has been established that adding the cellulose pulp of the inner layer of mulberry branch bark at a grinding degree of 30 °SR contributes to the production of strong paper. It is recommended to add up to 30 % of cellulose pulp from the inner layer of mulberry branch bark to paper pulp as further addition adversely affects the paper whiteness.For citation: Babakhanova Kh.A., Galimova Z.K., Abdunazarov M.M., Ismailov I.I. Cellulose Pulp from Mulberry Branch Bark for the Paper Industry. Lesnoy Zhurnal [Russian Forestry Journal], 2020, no. 5, pp. 193–200. DOI: 10.37482/0536-1036-2020-5-193-200

The utilization of branchwood as lignocellulosic raw material source for paper production may have the potential of solving the problem of the availability of raw material in the pulp and paper industry. This study therefore compared the chemical composition and fiber morphological indices (according to Franklin’s method) of stemwood and branchwood in Eucalyptus camaldulensis and Pinus halepensis trees grown in Egypt. The statistical analysis showed a significant effect of species, wood type (stem and branchwood), and their interaction on the measured chemical constituents and fiber morphological indices at 0.05 significance level. In both genera, the stemwood exhibited a higher percentage of cellulose and hemicellulose and was lower in lignin, total extractives, and ash than those measured in branchwood. Also in both genera, the stemwood was higher in fiber length, Runkel ratio, rigidity coefficient, Muhlsteph ratio, and Luce’s shape factor, and lower in basic density and flexibility coefficient than those in branchwood. Based on the chemical analysis and the fiber morphological indices, the stemwood and branchwood of both species were suitable for paper production with various qualities. Moreover, good correlations were found in both stem and branchwood between the basic density and the fiber wall thickness and fiber lumen diameter. ln contrast, there was an independent association between the stemwood basic density and the fiber length, and this relationship in branchwood was positive for both genera.

This study evaluated the fibre morphology of Musa balbisiana leaf, stalk and stem portions for pulp and paper production. Samples of Musa balbisiana portions were prepared and macerated in equal volume of glacial acetic acid and hydrogen peroxide in ratio 1:1. Twenty cellulose fibres from each portion were randomly selected using Reichert visopan microscope to determine the physical fibre morphology while the derived fibre indices were calculated. Data collected were subjected to one way Analysis of Variance (ANOVA). Follow up tests carried out using Duncan Multiple Range Test (DMRT). Results showed that means of fibre length, fibre diameter, cell wall thickness and lumen width ranged between 1.35 and 2.46 mm, 16.46 and 33.34 µm, 7.58 and 24.99 µm, and 3.54 and 3.56 µm, respectively. The mean values of fibre length of Musa balbisiana leaf and stalk were not significant but were significantly different from the mean values of the stem at p

Objectives: The objective of the study was to study the compressive strength of the partially replaced paper mill waste in cement. Methods/ Statistical analysis: The concrete cube specimen were prepared for compressive strength test. In this study, the cement has been replaced with 20%, 30%, 40% and 50% of hypo sludge. The specimens were cured for two different ages (7 days and 28 days) and tested for compressive strength. The quadratic polynomial prediction equation was proposed using Response Surface Methodology (RSM). The prediction model was developed using the experimental output results. Thus, the prediction model facilitates the further research work to be conducted by researchers on paper mill waste replacement. The rate analysis was also further carried out to show the cost effectiveness of using the waste replacement in cement. Findings: The test was conducted on the compressive strength (7 days and 28 days) of control specimen (0%) and partial replacement of 20%, 30%, 40% and 50% of cement using the hypo sludge. Thus, 20% replacement of cement using hypo sludge has shown good compressive strength than the control specimen. The cost of 20% paper mill waste was less when compared to the cost of control specimen. Novelty/ Applications: The compressive strength of 20% partial replacement of paper mill waste in cement can be used in further construction. The prediction model can be used to predict the future compressive strength of partially replaced paper mill waste concrete. Keywords: Ordinary Portland cement; Paper mill waste; Hypo sludge; Partial replacement; RSM

Based on publications related to the use of micro- and nanofibrillated cellulose (MNFC) in papermaking applications, three sets of parameters (intrinsic and extrinsic variables, furnish composition, and degree of dispersion) were proposed. This holistic approach intends to facilitate understanding and manipulation of the main factors describing the colloidal behavior in systems comprising of MNFC, pulp fibers, and additives, which directly impact paper product performance. A preliminary techno-economic assessment showed that cost reductions driven by the addition of MNFC in paper furnishes could be as high as USD 149 per ton of fiber (up to 20% fiber reduction without adverse effects on paper’s strength) depending on the cost of papermaking fibers. It was also determined that better performance in terms of strength development associated with a higher degree of MNFC fibrillation offset its high manufacturing cost. However, there is a limit from which additional fibrillation does not seem to contribute to further strength gains that can justify the increasing production cost. Further research is needed regarding raw materials, degree of fibrillation, and combination with polyelectrolytes to further explore the potential of MNFC for the reduction of weight of paper products.

This study is aimed at exploring the writing ability improvement process of g roup B students in TK Nursa and investigating to what extend the processing result of writing ability can be improved through sand paper alphabet . This study was a classroom action research using Kemmis and Mc. Taggart research model. This study was conducted in 2 cycles with 6 meetings in each cycle where every cycle consisted of the following steps: planning, action and observation, reflection. The sample of this study was 1 2 Group B students comprissing of 5 male students and 7 female students. The instruments used in this study was observational sheet of students activities using sand paper alphabet . The data in this study were quantitative and qualitative data. Quantitative data were analyzed by using descriptive statistic to compare the result from the first and second cycle. While qualitative data from field notes and interview were analyzed through the following steps: data reduction, data display and data verification. The results of this study show that there is the improvement of writing ability through sand paper alphabet , proven by the writing ability mean score in pre-cycle which was 50,17 % improve to 67,15 % in cycle I and keep increasing becoming 76,04 % in cycle II.

Chemical medicine which are synthetic chemicals or isolation products must not be added to herbal medicine, that was standared by Indonesian Head of the Drug and Food Control Agency in statement regarding Criteria and Procedure for Registration of Traditional Medicines, Standardized Herbal Medicines, and Phytofarmaka. This study aims to develope prototype of paper-based color test-strip to identify paracetamol trace in several types of Indonesian herbal medicine, better known as Jamu. Research conducted with experimental research wich make paper test-strip prototype by immobilizing reagents into Whatman’s filter paper, then it used to identify paracetamol in extracted Jamu samples. The paracetamol qualitative test uses 10 Jamu samples that distributed in Samarinda area. were also carried out on. Comparison methode with qualitative color reaction tests using specific reagents in the laboratory were also carried out beside the paper-based color test-strip methode. In addition with positive control tests using 5000 ppm paracetamol solution to make sure both methode used are valid. The results of this study showed that two prototype paper-based color test-strips containing 10% iron (III) chloride reagent and folin ciocalteu were able to detect the presence of paracetamol chemicals in Jamu samples with color reaction.

This study aims to predict financial distress in pulp and paper companies in Indonesia. The data used are the financial statements of each pul and paper company listed on the Indonesia Stock Exchange in 2012-2017. Data analysis techniques used descriptive analysis with three methods of financial distress prediction, namely the Altman Z-Score, Springate, and Zmijewski methods. The results showed that the Zmijewski method is a prediction method with the highest accuracy rate of 100%, with an error type of 0%. The Altman Z-Score method has an accuracy rate of 28.6%, with an error type of 71.4%. While the Springate method has an accuracy rate of 14.3%, with an error type of 85.7%. Therefore an accurate prediction method to predict the potential for financial distress is the Zmijewski method.

A classical result of K. L. Chung and W. Feller deals with the partial sums S k S_k arising in a fair coin-tossing game. If N n N_n is the number of “positive” terms among S 1 S_1 , S 2 S_2 , …, S n S_n then the quantity P ( N 2 n = 2 r ) P(N_{2n} = 2r) takes an elegant form. We lift the restriction on an even number of tosses and give a simple expression for P ( N 2 n + 1 = r ) P(N_{2n+1} = r) , r = 0 r = 0 , 1 1 , 2 2 , …, 2 n + 1 2n+1 . We get to this ansatz by adaptating the Feynman–Kac methodology.

In this study, it is aimed to determine the most suitable time series models with Box-Jenkins method, which is the most widely used in prediction studies. Export and import values have been predicted by 2020 with the most suitable models. The data used in this study were obtained from the Turkey Statistical Institute. Data are monthly data covering from January 2003 to December 2014. Sum of Squared Errors (SSE) and Mean Squared Error (MSE) criteria were taken into consideration when selecting the best Box-Jenkins models. Also, in order to test the success of forecasting of the models, Root mean Error Square (RMSE), Mean Absolute Error (MAE) and Mean Absolute Percentage Error (MAPE) were used. As a result of the analyzes, it was determined that the most suitable models for export and import data were ARIMA (2,1,0) (0,0,1)12 and ARIMA(3,1,2)(1,0,1)12. It was predicted that the rate of exports meeting imports in paper and paper products of Turkey will be approximately 0.86 in 2020.

Borassus flabellifer L., one of the palm-based commodities in Indonesia which is grows in dry areas especially around the north coast of Java Island. An abundant waste of this plant is a leaf midrib and fruit fiber have an opportunity as a source of lignocellulose for the paper industry. In this study, Kraft paper production was conducted to know the influence of the proportion of Borassus flabellifer L. leaf midrib pulp and fruit fiber pulp, and the concentration of Polyvinyl Acetate (PVAc) adhesives on the sensory and physical quality of kraft paper. The research method used was Randomized Block Design (RBD) with two factors. The Friedman test was used to determine the sensory quality of kraft paper. The physical quality of kraft paper was used ANOVA analysis. The results showed that the treatment of raw material proportion and PVAc adhesive concentration had significant effect on color, surface texture, yield, and tensile resistance, but not significantly different between treatment of gramature and tear resistance. The best treatment of sensory tests was kraft paper with proportion of leaf midrib pulp 50% and fruit fiber pulp 50% and a 7.5% PVAc adhesive concentration. It has a yield value of 72.11%, gramature of 162.80 g/m2, tensile strength of 1.70 %, and tear resistance of 197.6 gf.