Search

Hyperpolarized (HP) 129 Xe MRI uniquely images pulmonary ventilation, gas exchange, and terminal airway morphology rapidly and safely, providing novel information not possible using conventional imaging modalities or pulmonary function tests. As such, there is mounting interest in expanding the use of biomarkers derived from HP 129 Xe MRI as outcome measures in multi-site clinical trials across a range of pulmonary disorders. Until recently, HP 129 Xe MRI techniques have been developed largely independently at a limited number of academic centers, without harmonizing acquisition strategies. To promote uniformity and adoption of HP 129 Xe MRI more widely in translational research, multi-site trials, and ultimately clinical practice, this position paper from the 129 Xe MRI Clinical Trials Consortium (https://cpir.cchmc.org/XeMRICTC) recommends standard protocols to harmonize methods for image acquisition in HP 129 Xe MRI. Recommendations are described for the most common HP gas MRI techniques-calibration, ventilation, alveolar-airspace size, and gas exchange-across MRI scanner manufacturers most used for this application. Moreover, recommendations are described for 129 Xe dose volumes and breath-hold standardization to further foster consistency of imaging studies. The intention is that sites with HP 129 Xe MRI capabilities can readily implement these methods to obtain consistent high-quality images that provide regional insight into lung structure and function. While this document represents consensus at a snapshot in time, a roadmap for technical developments is provided that will further increase image quality and efficiency. These standardized dosing and imaging protocols will facilitate the wider adoption of HP 129 Xe MRI for multi-site pulmonary research.

In this study, the removal of UV254, phenol, and calcium from paper industry wastewater by persulfate oxidation was investigated. Fe2+ addition and heat application methods were used for persulfate...

Polymeric felts are commonly used in the papermaking process on the paper machine wet end, in the press section, and in the dryer section. They provide an important function during paper manufacturing, including as a carrier or support; as a filter media assisting with water removal on the paper machine; in retention of fibers, fines, and fillers; and in some applications, such as tissue and towel, to impart key structural features to the web. These felts can have highly interwoven complex internal structures comprised of machine direction and cross-machine direction yarns of varying sizes and chemical compositions. Here, we present a non-intrusive three-dimensional (3D) image visualization method using advanced X-ray computed tomography (XRCT). This method was used to characterize the complex 3D felt structure and determine the water removal characteristics of some commonly used paper machine felts. The structural features analyzed include porosity; specific pore-yarn interfacial surface area; 3D pore size distribution; 3D fiber or yarn-size distribution; and their variations through the thickness direction. The top, middle, and bottom layers of the felt have very different structures to assist with water removal and impart paper properties. The size distribution of the yarns, as well as the pores in the different layers of the felt, are also inherently different. These structural features were non-intrusively quantified. In addition, variation in the structural characteristics through the thickness of the felts and its potential role in papermaking is explored. In addition to the 3D structural characteristics, permeability characteristics and water removal characteristics, including rewetting of select felt samples, have also been experimentally determined. It is interesting to observe the relationship between key structural features and permeability and water removal characteristics. These relationships can provide additional insights into press felt design, as well as ways to improve product properties and the dewatering efficiency and productivity of the paper machine.

Cardiac arrhythmias are a major cause of death and disability. A large number of experimental cell and animal models have been developed to study arrhythmogenic diseases. These models have provided important insights into the underlying arrhythmia mechanisms and translational options for their therapeutic management. This position paper from the ESC Working Group on Cardiac Cellular Electrophysiology provides an overview of (i) currently available in vitro, ex vivo, and in vivo electrophysiological research methodologies, (ii) the most commonly used experimental (cellular and animal) models for cardiac arrhythmias including relevant species differences, (iii) the use of human cardiac tissue, induced pluripotent stem cell (hiPSC)-derived and in silico models to study cardiac arrhythmias, and (iv) the availability, relevance, limitations, and opportunities of these cellular and animal models to recapitulate specific acquired and inherited arrhythmogenic diseases, including atrial fibrillation, heart failure, cardiomyopathy, myocarditis, sinus node, and conduction disorders and channelopathies. By promoting a better understanding of these models and their limitations, this position paper aims to improve the quality of basic research in cardiac electrophysiology, with the ultimate goal to facilitate the clinical translation and application of basic electrophysiological research findings on arrhythmia mechanisms and therapies.

We demonstrated the thermally robust reduced graphene oxide (rGO)/boron nitride nanotube (BNNT) papers and their application in electromagnetic interference shielding. In order to overcome the thermal durability shortcomings of electromagnetic wave shielding paper based on rGO nanomaterial, rGO/BNNT electromagnetic interference (EMI) shielding paper having excellent thermal durability could be manufactured using BNNT nanomaterials having excellent chemical and thermal stability at high temperature. With the addition of a little BNNT, the durability against temperature can be increased by more than two times while there is little reduction in EMI performance.

Paper-based photodetectors have attracted extensive research interest owing to their environmentally friendly and highly deformable properties. Although perovskite crystals with outstanding optoelectronic properties have proved to be one of the most promising candidates for photodetectors, the development of paper-based photodetectors is hindered by the moisture absorptivity of paper and the instability of perovskite crystals in a humid atmosphere. In this study, we demonstrate a highly deformable and high-performance paper-based perovskite photodetector. The photodetector maintains its excellent performance even after exposure to a relative humidity of 60% for 120 h.

More than 50 billion disposable paper cups used for cold and hot beverages are sold within the United States each year. Most of the cups are coated with a thin layer of plastic — low density polyethylene (LDPE) — to prevent leaking and staining. While the paper in these cups is both recyclable and compostable, the LDPE coating is neither. In recycling a paper cup, the paper is separated from the plastic lining. The paper is sent to be recycled and the plastic lining is typically sent to landfill. In an industrial composting environment, the paper and lining can be composted together if the lining is made from compostable materials. Coating paper cups with a compostable performance material uniquely allows for used cups to be processed by either recycling or composting, thus creating multiple pathways for these products to flow through a circular economy. A segment of the paper converting industry frequently uses an extrusion grade of polylactic acid (PLA) for zero-waste venues and for municipalities with ordinances for local composting and food service items. The results among these early adopters reveal process inefficiencies that elevate manufacturing costs while increasing scrap and generally lowering output when using PLA for extrusion coating. NatureWorks and Sung An Machinery (SAM) North America researched the extrusion coating process utilizing the incumbent polymer (LDPE) and PLA. The trademarked Ingeo 1102 is a new, compostable, and bio-based PLA grade that is specifically designed for the extrusion coating process. The research team identified the optimum process parameters for new, dedicated PLA extrusion coating lines. The team also identified changes to existing LDPE extrusion lines that processors can make today to improve output. The key finding is that LDPE and PLA are significantly different polymers and that processing them on the same equipment without modification of systems and/or setpoints can be the root cause of inefficiencies. These polymers each have unique processing requirements with inverse responses. Fine tuning existing systems may improve over-all output for the biopolymer without capital investment, and this study showed an increase in line speed of 130% by making these adjustments. However, the researchers found that highest productivity can be achieved by specifying new systems for PLA. A line speed increase to more than 180% and a reduction in coat weight to 8.6 µm (10.6 g/m2 or 6.5 lb/3000 ft2) was achieved in this study. These results show that Ingeo 1102 could be used as a paper coating beyond cups.

Objective The objective of this study was to develop the first edition of a Chinese evidence-based position paper on the management of oral leukoplakia (OLK). Study Design The consultant group for drafting the position paper consisted of 31 oral medicine specialists and 2 evidence-based medicine specialists. English studies (searched in PubMed, EMBASE, and the Cochrane Library) and Chinese studies (searched in China National Knowledge Infrastructure and WanFang) published before January 2018 were used. The quality of the study was assessed using the Grading of Recommendations Assessment, Development, and Evaluation grid, and the strength of the recommendations was determined based on the results of 3 rounds of voting among the consultant group members using the Delphi method. Results Twenty-two evidence-based guidelines for clinical management and monitoring of OLK were established in this position paper. A clinical path diagram for oral health practitioners was constructed based on the recommendations. Conclusion Current evidence suggests that management and monitoring of patients with OLK should be performed by experienced clinicians to control the lesion and for early detection of malignant transformation. However, all recommendations are based on evidence of low or extremely low quality and may require further modification as new evidence is produced.

Measuring line efficiency and productivity are very important to do to find out in which level the efficiency and productivity of the business process has been carried out by the company. This paper aims to determine line efficiency analysis and provide suggestions for improvements to increase line efficiency at the finishing department of PT Pura Nusapersada. Measurement of line efficiency in the finishing department of PT Pura Nusapersada paper mill unit 7 has not yet reached the company's line efficiency value target. The initial line efficiency assessment obtained a percentage of 65.14% while the company's target was 70%. In this paper, a fishbone diagram is used to determine the root cause of the problem. Based on the research results, it was found that the most dominant cause of the problem was the inefficient work elements at the cutter, sorting, pollar, and packing work stations. Improvements were made using the eliminate, combine, re-arrange, and simplify (ECRS) method and the results of the line efficiency improvements in the finishing department increased to 71.90% and the company's target can be met.

Due to great advantages, such as simple operation, high porosity, and good fiber continuity, the working principle and research progress of electrospinning technology was studied and polyvinyl alcohol (PVOH) nanofibers were prepared via this process. Air filter paper was used as the receiving substrate to prepare electrospun nano air filter paper (NAFP). The PVOH concentration, static voltage, and receiving distance, were tested to explore the influence of spinning parameters on the filtration performance. Further, the microfiber morphology of the electrospun NAFP was observed. The performance of filter paper, including air permeability, pore size, initial resistance, filtration efficiency, and dust retention, were tested. The results showed that the electrospun NAFP had better filtration performance compared to the air filter paper, and simultaneously they had lower initial resistance and higher precision filtration efficiency. The nanofiber influenced the surface of the air filter paper, as it sharply reduced the pore size. When the spinning condition was 10%, 21 kV, and 15 cm, the pore size decreased approximately 0.6 times of the original, which meant the electrospun NAFP could capture particles ≥ 0.2 μm in size. Finally, after three repeated uses, the good filtration performance was maintained.

From the moment of production, paper as a printing substrate is exposed to the process of natural ageing regardless of the type of cellulose fibres in its composition. Accordingly, the prints produced by the various printing techniques are also exposed to several factors that impair the quality of the print i.e. its colour over time. Therefore, it is very important to properly select the printing substrate for achieving a high quality of graphic products. For that purpose, three types of papers with hemp fibres were used as printing substrates which were printed with laboratory hand-operated instrument Esiproof using flexographic cyan (C), magenta (M), yellow (Y) and black (K) water-based inks. Prints were artificially aged in SunTEST XLS+ test chamber according to standard ASTM D 6789-02 for 48 and 96 hours. Based on changes in the reflectance spectra of each printed ink after exposure to electromagnetic radiation it was noticed how composition of printing substrate strongly influence on colour stability of prints due time. An increase of exposure time to electromagnetic radiation leads to a decrease in the value of the reflectance of the printing substrate and cyan, magenta and yellow prints. It was confirmed how electromagnetic radiation have the greatest impact on the reflectance of yellow print, while the black one is the most stabile regardless of the substrate it was printed on.

Perforation is used in multilayer tissue products, such as toilet and kitchen papers, as part of the converting process. Perforation facilitates the detachment of consecutive sheets by the user. The compromise between the strength required to detach a perforated sheet and the strength required to break a sheet affects the perforation efficiency. In this work, the mechanical behaviors of 15 commercial papers from different European producers were studied. A morphological analysis of the materials was performed, followed by the determination of their perforation efficiency (through tensile tests). A qualitative analysis of the cuts quality, along with a quantitative analysis of the same cuts dimensions was performed through an optical system. Finally, the stress concentration in the holes and the influence of the cuts distance were analyzed using a finite element model implemented in Abaqus/Standard finite element software. The results showed that a cut distance of 2.0 mm should not be used in these types of papers, and the perforation efficiency increased with the cut distance, regardless of the number of plies in the toilet paper. The stress concentration factor was also determined to have a limit value of 0.11. Papers above this limit value tear at the perforation line, as desired.

Herein, paper mill waste sludge (PMS) from two different sources has been investigated to extract calcium hydroxide, Ca(OH)2 by a facile and inexpensive extraction process. This green process exploits typical chemical precipitation (CP) in an aqueous medium at room temperature to develop an economically and industrially viable technique for the effective utilization of calcium-containing waste sludge. PMS samples, collected from local paper mill plants of Bangladesh, were the main precursors wherein HCl and NaOH were utilized for chemical treatment. The as-synthesized products were analyzed by a variety of characterization tools including X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, Scanning electron microscopy (SEM), and Energy Dispersive X-ray (EDX) elemental analyses. Our studies confirm that the extracted product contains Ca(OH)2 as a major content, albeit it also includes CaCO3 phase formed owing to the inescapable carbonation process from the surrounding environment. The particle size of the synthesized products is in the range of 450 - 500 nm estimated from SEM micrographs. The crystallite domain size of the same estimated from XRD analyses and was found to be ~47 nm and ~31 nm respectively for product-A and product-B considering major (101) Bragg peak of Ca(OH)2. The yield percentage of the isolated products is about 65% for samples collected from both sources.

Malnutrition, muscle loss, and cachexia are prevalent in cancer and remain key challenges in oncology today. These conditions are frequently underrecognized and undertreated and have devastating consequences for patients. Early nutrition screening/assessment and intervention are associated with improved patient outcomes. As a multifaceted disease, cancer requires multimodal care that integrates supportive interventions, specifically nutrition and exercise, to improve nutrient intake, muscle mass, physical functioning, quality of life, and treatment outcomes. An integrated team of healthcare providers that incorporates societies’ recommendations into clinical practice can help achieve the best possible outcomes. A multidisciplinary panel of experts in oncology, nutrition, exercise, and medicine participated in a 2-day virtual roundtable in October 2020 to discuss gaps and opportunities in oncology nutrition, alone and in combination with exercise, relative to current evidence and international societies’ recommendations. The panel recommended five principles to optimize clinical oncology practice: (1) position oncology nutrition at the center of multidisciplinary care; (2) partner with colleagues and administrators to integrate a nutrition care process into the multidisciplinary cancer care approach; (3) screen all patients for malnutrition risk at diagnosis and regularly throughout treatment; (4) combine exercise and nutrition interventions before (e.g., prehabilitation), during, and after treatment as oncology standard of care to optimize nutrition status and muscle mass; and (5) incorporate a patient-centered approach into multidisciplinary care.

Two novel methods of measuring the dimensions of oral lesions are described, which would be of help in deciding relative efficacies of different therapeutic agents when used in clinical trials after larger studies quantitatively assessed for inter/intraobserver variability.

Osteoporosis and associated fractures present a major challenge in improving global health outcomes. Key clinical aspects are the definition of osteoporosis and associated fractures, fracture risk prediction, stratification of risk of fracture, intervention thresholds and the most appropriate intervention based on integration of aforementioned. Correct understanding and application of these concepts are essential to stem the increasing tide of fragility fractures associated with an aging population. The role of muscle strength and function, sarcopenia, and the newly emerging concept of osteosarcopenia in maintaining bone health are discussed in detail.

Colorimetric gas detectors have been widely applied in many fields such as environmental sciences, industrial hygiene, process control, forensic science and indoor air quality monitoring. They have a history of about 100 years and include devices such as gas detector tubes and paper-based gas detectors. The sensitivity and selectivity of the colorimetric gas detector are relatively high compared to other types of gas detectors such as semiconductor, catalytic combustion and electrochemical gas detectors. Detection of gas concentration can be performed by the naked eye in some colorimetric gas detectors. These methods do not require an electrical power source and are simple, so they are suitable for field operations. This review introduces the history and provides a general overview of the development in the research of colorimetric gas detectors. Recently, the sensitivity and selectivity of colorimetric gas detectors have improved. New materials such as enzymes or particles with a large surface area have been utilized to improve selectivity and sensitivity. Moreover, new gas detectors without toxic materials have been developed to reduce the environmental load. At present, there is a rapid development of IoT sensors in many industrial fields, which might extend the applications of colorimetric gas detectors in the near future.

This work analyzes the energy performance implications of the physicochemical properties and the mineralogical elemental composition of agro-industrial wastes in the form of pellets (ISR pellets) and pine bark chips (PBCh). ISR pellets were made from a mixture of industrial wastewater treatment plant (IWTP) primary sludge, coal boiler ashes (CBA), and wood waste chips (WW), which are wastes rich in inorganic material and with a usable energy potential. All these residues were obtained from the production processes of paper company (Smurfit Kappa Colombia). ISR pellets and PBCh were tested as individual and mixed fuels in the thermochemical gasification and combustion processes. Several synergistic effects were found through the co-processing of these fuels, resulting in improvements in the performance indices normally used for the energy assessment of waste, as well as substantial environmental impact and operational behavior improvements. These effects were predicted through fusibility correlations from the elemental composition of the inorganic content, particularly the low melting point salts precursor species and fusibility temperature, as developed for coal ashes. The results of experimental co-processing validated these predictions.

The goal of this position paper on ventilatory support at home for children is to provide expert consensus from Australia and New Zealand on optimal care for children requiring ventilatory support at home, both non-invasive and invasive. It was compiled by members of the Thoracic Society of Australia and New Zealand (TSANZ) and the Australasian Sleep Association (ASA). This document provides recommendations to support the development of improved services for Australian and New Zealand children who require long-term ventilatory support. Issues relevant to providers of equipment and areas of research need are highlighted.

The majority of chemical experiments conducted during educational programs are carried out in laboratories because they require instructors with special skills, in addition to large, expensive instruments. Recently, there has been an increasing demand for chemical experiments that can be carried out anywhere. Herein, we propose a novel type of paper-based analytical device (PAD) for enabling quantitative analysis without the requirement for a micropipette, since the PAD features a large sample loading zone and a waste zone, enabling accurate volume control of a liquid sample. We initially employed a micropipette to evaluate the PAD and demonstrate the quantitative analysis of ascorbic acid (AA) and pH using different loading volumes. Finally, we determined the AA concentrations and pH values of commercially available beverages using disposable plastic droppers, and the obtained results were in good agreement with those obtained through conventional methods. This PAD format can therefore be used as a novel educational tool for conducting certain chemical analyses in remote learning environments.

The treatment of patients with advanced acute heart failure is still challenging. Intra-aortic balloon pump (IABP) has widely been used in the management of patients with cardiogenic shock. However, according to international guidelines, its routinary use in patients with cardiogenic shock is not recommended. This recommendation is derived from the results of the IABP-SHOCK II trial, which demonstrated that IABP does not reduce all-cause mortality in patients with acute myocardial infarction and cardiogenic shock. The present position paper, released by the Italian Association of Hospital Cardiologists, reviews the available data derived from clinical studies. It also provides practical recommendations for the optimal use of IABP in the treatment of cardiogenic shock and advanced acute heart failure.

The European Society of Cardiology guidelines on non-ST-elevation acute coronary syndromes suggest different temporal strategies for the angiographic study depending on the risk profile. The scientific evidence underlying the guideline recommendations and the critical issues currently existing in Italy, that often do not allow either an extended strategy of revascularization within 24 h or the application of the principle of the same day transfer from a spoke to a hub centre, are analysed. The position paper focuses, in particular, on the subgroup of patients with a defined diagnosis of non-ST-elevation myocardial infarction by proposing a timing of coronary angiography/revascularization that takes into account the available scientific evidence and the organizational possibilities of a considerable part of national cardiology services.

The present paper provides an update of previous recommendations on Home Blood Pressure Monitoring from the European Society of Hypertension (ESH) Working Group on Blood Pressure Monitoring and Cardiovascular Variability sequentially published in years 2000, 2008 and 2010. This update has taken into account new evidence in this field, including a recent statement by the American Heart association, as well as technological developments, which have occurred over the past 20 years. The present document has been developed by the same ESH Working Group with inputs from an international team of experts, and has been endorsed by the ESH. ispartof: JOURNAL OF HYPERTENSION vol:39 issue:9 pages:1742-1767 ispartof: location:Netherlands status: published

Clear legal content of white papers provides certainty, stability and trust in the relations between all the participants in initial coins offering (ICO) procedures and contributes to the successfu...

Technologic advancements and the evolving digital health landscape have offered innovative solutions to several of our health care system's issues as well as increased the number of digital interactions and type of personal health information that is generated and collected, both within and outside of traditional health care. This American College of Physicians' position paper discusses the state of privacy legislation and regulations, highlights existing gaps in health information privacy protections, and outlines policy principles and recommendations for the development of health information privacy and security protections that are comprehensive, transparent, understandable, adaptable, and enforceable. The principles and recommendations aim to improve on the privacy framework in which physicians have practiced for decades and expand similar privacy guardrails to entities not currently governed by privacy laws and regulations. The expanded privacy framework should protect personal health information from unauthorized, discriminatory, deceptive, or harmful uses and align with the principles of medical ethics, respect individual rights, and support the culture of trust necessary to maintain and improve care delivery.

Background Coronavirus Disease 2019 (COVID-19), firstly reported in China last November 2019, became a global pandemic. It has been shown that periods of isolation may induce a spike in alcohol use disorder (AUD). In addition, alcohol-related liver disease (ALD) is the most common consequence of excessive alcohol consumption worldwide. Moreover, liver impairment has also been reported as a common manifestation of COVID-19. Aims The aim of our position paper was to consider some critical issues regarding the management of ALD in patients with AUD in the era of COVID-19. Methods A panel of experts of the Italian Society of Alcohology (SIA) met via “conference calls” during the lockdown period to draft the SIA’s criteria for the management of ALD in patients with COVID-19 as follows: (a) liver injury in patients with ALD and COVID-19 infection; (b) toxicity to the liver of the drugs currently tested to treat COVID-19 and the pharmacological interaction between medications used to treat AUD and to treat COVID-19; (c) reorganization of the management of compensated and decompensated ALD and liver transplantation in the COVID-19 era. Results and Conclusions The COVID-19 pandemic has rapidly carried us toward a new governance scenario of AUD and ALD which necessarily requires an in-depth review of the management of these diseases with a new safe approach (management of out-patients and in-patients following new rules of safety, telemedicine, telehealth, call meetings with clinicians, nurses, patients, and caregivers) without losing the therapeutic efficacy of multidisciplinary treatment.

COVID‐19 has infected millions of patients and impacted healthcare workers worldwide. Personal Protective Equipment (PPE) is a key component of protecting frontline clinicians against infection. The benefits of PPE far outweigh the risks, nonetheless, many clinicians are exhibiting skin injury caused by PPE worn incorrectly. These skin injuries, ranging from lesions to open wounds are concerning because they increase the susceptibility of viral infection and transmission to other individuals. Early into the COVID‐19 pandemic (April 2020), the U.S. National Pressure Injury Advisory Panel (NPIAP) developed a series of position statements to improve wear‐ability of PPE and protect healthcare professionals and their patients as safe from harm as possible under the circumstances. The NPIAP positions, which were formed by conducting a systematic review of what was known at the time, include: (1) Prepare skin before and after wearing PPE with skin sealants, barrier creams and moisturizers; (2) Frequent PPE offloading to relieve pressure and shear applied to skin; (3) treat visible skin injuries immediately caused by PPE to minimize future infection; (4) non‐porous dressings may provide additional skin protection, but lack evidence; (5) health systems should take care to educate clinicians about placement and personal hygiene related to handling PPE. Throughout all of these practices, handwashing remains a top priority to handle PPE. These NPIAP positions provided early guidance to reduce the risk of skin injury caused by PPE based on available research regarding PPE injuries, a cautious application of evidence‐based recommendations on prevention of device related pressure injuries in patients and the expert opinion of the NPIAP Board of Directors. Clinicians who adhere to these recommendations reduce the prospects of skin damage and long‐term effects (e.g. scarring). These simple steps to minimize the risk of skin injury and reduce the risk of coronavirus infection from PPE can help.

International audience; In 2014 leading publishers withdrew more than 120 nonsensical publications automatically generated with the SCIgen program. Casual observations suggested that similar problematic papers are still published and sold, without follow-up retractions. No systematic screening has been performed and the prevalence of such nonsensical publications in the scientific literature is unknown. Our contribution is 2-fold. First, we designed a detector that combs the scientific literature for grammar-based computer-generated papers. Applied to SCIgen, it has a 83.6% precision. Second, we performed a scientometric study of the 243 detected SCIgen-papers from 19 publishers. We estimate the prevalence of SCIgen-papers to be 75 per million papers in Information and Computing Sciences. Only 19% of the 243 problematic papers were dealt with: formal retraction (12) or silent removal (34). Publishers still serve and sometimes sell the remaining 197 papers without any caveat. We found evidence of citation manipulation via edited SCIgen bibliographies. This work reveals metric gaming up to the point of absurdity: fraudsters publish nonsensical algorithmically generated papers featuring genuine references. It stresses the need to screen papers for nonsense before peer-review and chase citation manipulation in published papers. Overall, this is yet another illustration of the harmful effects of the pressure to publish or perish.

BACKGROUND Medical and dental education is highly dependent on the development of students’ clinical skills in addition to their theoretical knowledge. The use of logbooks to monitor the clinical procedures performed by students provides a great advantage in the educational process. Because of the pandemic, utilisation of digital logbooks may prove to be more advantageous. This study aims to investigate the effective use of online progress records and as to whether they actually decrease the chance of error compared to the traditional paper-based logbooks. METHODS In this quasi-experimental study, 139 student logbooks were studied to compare online and paper-based clinical procedures. Logbook monitoring of undergraduate dental students reported by the students themselves vs. instructors was compared. Students filled mandatory individual paper-based logbooks, reporting the number of clinical procedures performed in that year. Additionally, they filled online log- sheets, and updated them regularly. Instructors proofread and signed the paper-based students’ logbooks. Instructors also separately submitted individual online forms recording each student’s clinical procedure performed in clinical sessions. A total of 556 logbook records was collected. The mean number of procedures recorded by the students and instructors (online and paper-based) were statistically compared. RESULTS The mean number of procedures recorded in student-reported online logbooks were significantly lower than that in all other logbooks. Paper-based and online instructorreported logbook data was identical to that of student reported paper-based logbooks. CONCLUSIONS Within the scope of the study, it was concluded that online tools are an asset and may be used as a substitute for paper-based monitoring of clinical activity for instructors. However, students’ compliance updating and uploading online forms is a factor, which is a matter of concern. KEY WORDS Undergraduate Dental Logbooks, Clinical Progress Records, Monitoring Methods, Monitoring Tools, Undergraduate Dental Monitoring, Undergraduate Clinical Procedures Records

Aims The epidemiologic Study of Women's Health Across the Nation (SWAN) includes urinary incontinence (UI) questionnaire items. We introduced an independently self-administered paper towel test (PTT-ISA; invention disclosure #2021-347) to objectively demonstrate UI. Aims were to determine: (1) PTT-ISA compliance and (2) relationship to questionnaire results. Methods 276 community women were invited to complete both SWAN questionnaire and PTT-ISA. For PTT-ISA, a woman holds a trifold brown paper towel against her perineum while coughing hard three times. She checks the towel for wetness and compares it with pictorial showing wetted area gradations (dry towel through >6 ml/saturated). She then selects the best photo match for her towel. A newly conceptualized variable constructed as PTT-ISA plus questionnaire results was formed. Results Of 276 women, noncompliance with PTT-ISA was 2.2% (6 women). Four others (1.5%) were missing questionnaires. For the remaining 266 women, conceptual cohesiveness between questionnaire-only and PTT-ISA + questionnaire was demonstrated in 165 (62.0%). Lack of cohesiveness occurred in 101 (38.9%), including 41 women who said "no" to the questionnaire item indicative of stress UI and had leakage on PTT-ISA; leakage degree varied across the full pictorial spectrum from drops to saturated. Conclusion PTT-ISA demonstrates high compliance, with rate comparable to survey compliance. It is a novel measure for objective sign of urine loss when independently self-administered by community women outside of a clinic environment. Further research comparing PTT-ISA with clinician-observed cough test is warranted. As independently self-administered, PTT-ISA is simple, noninvasive, inexpensive, and an acceptable test that adds value to otherwise survey-dependent research.

To provide an international standard for the safe management and operation of ships and for pollution prevention, the International Maritime Organization (IMO) introduced the International Safety Management (ISM) Code (adopted in 1993 and entered in force on 1st July 1998). The Code, through its guidelines and recommendations, provides seafarers (ship’s crew) the course of action for the safety and quality assurance process on ships. Traditionally a paper-based system, the ISM Code is now being digitalized in every aspect to streamline the processes to improve ship operations. This paper presents findings of a review of existing literature available on the world wide web to highlight areas of the Code that have been impacted by technology and the benefits that are being reaped. However, recent cyber attacks on ships and the maritime industry require a discussion on various implications associated with ships becoming increasingly reliant on technology and the advancing digital world. This paper highlights and explains the related implications and suggests strategies to address them.

One of the requirements of the qualification paper is to process data and information, as well as to conduct research in the analytical part, it is mandatory to use various research methods. The aim of the research is to analyse the compliance of the application of research methods with the tasks of the qualification work and the usefulness of the research results to achieve the set goal, as well as to provide recommendations on the application of descriptive and inferential statistics in the development of qualification work.

Background/Aims: The incidence of disease outbreaks in clinical settings arising from ultrasound examinations is well documented, and is a source of worry. The ultrasound transducers and the coupling gel are potential sources of these infections since they come in direct contact with the patient’s skin. In this study, we examine the efficacy of the widespread practice of the use of plain non-sterile tissue paper in some low-cost private ultrasound centres in our locality as a method of disinfecting ultrasound transducers after each use. Its potential impact on nosocomial infection management in clinical practice is also examined. Methods: Swab samples from convex ultrasound transducers before and after transabdominal scanning of three consecutive patients were obtained from 10 different ultrasound centres in urban and rural areas of Enugu state. Ultrasound coupling gel samples were equally obtained, and all samples cultured for bacteria growth which was quantified in colony-forming units per ml (CFU/ml) and reported in 1000/ml. Paired sampled t-test was used to check for significance in a reduction in a bacterial load before and after the transducer was cleaned. Results: Nine different bacterial strains were isolated. Staphylococcus aureus and Klebsiella spp had the highest percentage of occurrence in all centres. Significant bacteria growth was recorded in the morning before the examination, and plain tissue paper significantly reduced the bacteria load in the ultrasound transducer. Conclusion: Even though disinfecting ultrasound transducers with non-sterile plain tissue paper alone is statistically effective and has the potential to minimize nosocomial infection, it is however not clinically effective and hence not advised.

The role of certain viruses in the etiology of some tumors is today indisputable, but there is a lack, however, of annoverview of the relationship between viruses and cancer with amultidisciplinary approach. For this reason, the Health Sciences Foundation has convened a group of professionals from different areas of knowledge to discuss the relationship between viruses and cancer, and the present document is the result of these deliberations. Although viruses cause only 10-15% of cancers, advances in oncology research are largely due to the work done during the last century on tumor viruses. The clearest cancer-inducing viruses are: HPV, HBV, HCV, EBV and, depending on the geographical area, HHV-8, HTLV-1 and HIV. HPVs, for example, are considered to be the causative agents of cervical carcinomas and, more recently, of a proportion of other cancers. Among the Herpes viruses, the association with the development of neoplasms is well established for EBV and HHV-8. Viruses can also be therapeutic agents in certain neoplasms and, thus, some oncolytic viruses with selective tropism for tumor cells have been approved for clinical use in humans. It is estimated that the prophylaxis or treatment of viral infections could prevent at least 1.5 million cancer deaths per year.

Pediatric acute liver failure (PALF) is a rare, rapidly progressive clinical syndrome with significant morbidity and mortality. The phenotype of PALF manifests as abrupt onset liver dysfunction, which can be brought via disparate etiology. Management is reliant upon intensive clinical care and support, often provided by the collaborative efforts of hepatologists, critical care specialists, and liver transplant surgeons. The construction of an age-based diagnostic approach, the identification of a potential underlying cause, and the prompt implementation of appropriate therapy can be lifesaving; however, the dynamic and rapidly progressive nature of PALF also demands that diagnostic inquiries be paired with monitoring strategies for the recognition and treatment of common complications of PALF. Although liver transplantation can provide a potential life-saving therapeutic option, the ability to confidently determine the certainness that liver transplant is needed for an individual child has been hampered by a lack of adequately tested clinical decision support tools and accurate predictive models. Given the accelerated progress in understanding PALF, we will provide clinical guidance to pediatric gastroenterologists and other pediatric providers caring for children with PALF by presenting the most recent advances in diagnosis, management, pathophysiology, and associated outcomes.

Intra-operative ultrasound has become a relevant imaging modality in neurosurgical procedures. While B-mode, with its intrinsic limitations, is still considered the primary ultrasound modality, intra-operative contrast-enhanced ultrasound (ioCEUS) has more recently emerged as a powerful tool in neurosurgery. Though still not used on a large scale, ioCEUS has proven its utility in defining tumor boundaries, identifying lesion vascular supply and mapping neurovascular architecture. Here we propose a step-by-step procedure for performing ioCEUS analysis of the brain, highlighting its neurosurgical applications. Moreover, we provide practical advice on the use of ultrasound contrast agents and review technical ultrasound parameters influencing ioCEUS imaging.

Atherosclerosis often affects the coronary arterial tree. Frequently the disease does not translate in significant narrowing of the vessels, thus determining only a non-obstructive disease. This condition that is described as non-obstructive coronary artery disease (NobsCAD) should be distinguished from the absence of disease (i.e. smooth coronary arteries) as it carries a specific prognostic value. The detection and reporting of NobsCAD should prompt preventive measures that can be individualized upon the degree of the underlying burden of disease. The accompanying clinical condition, the other cardiovascular risk factors present, and the description of the severity and extent of NobsCAD should provide the framework for an individualized treatment that should also consider the best available scientific evidence and guidelines. The description of NobsCAD represents important information to be collected whenever a coronary angiogram (both invasive and non-invasive) is performed. Treating the patient according to the presence and extent of NobsCAD offers prognostic benefits well beyond those offered by considering only the traditional cardiovascular risk factors. In order to reach this goal, NobsCAD should not be confused with the absence of coronary atherosclerosis or even ignored when detected as if it was a trivial information to provide.

The COVID-19 pandemic represents an unprecedented event that has brought deep changes in hospital facilities with reshaping of the health system organization, revealing inadequacies of current hospital and local health systems. When the COVID-19 emergency will end, further evaluation of the national health system, new organization of acute wards, and a further evolution of the entire health system will be needed to improve care during the chronic phase of disease. Therefore, new standards for healthcare personnel, more efficient organization of hospital facilities for patients with acute illnesses, improvement of technological approaches, and better integration between hospital and territorial services should be pursued. With experience derived from the COVID-19 pandemic,new models, paradigms, interventional approaches, values and priorities should be suggested and implemented.

Since the first statement of the German Society of Oto-Rhino-Laryngology, hypoglossal nerve stimulation (HNS) is meanwhile an established treatment option for obstructive sleep apnea (OSA). There are three HNS systems available in Germany which differ in their technical details of the underlying comparable basic principle. For the unilateral HNS with respiratory sensing, several comparative studies, high-volume register analysis and long-term reports exist. The continuous HNS without respiratory sensing does not require a sleep endoscopy for indication. For the bilateral continuous HNS as the single partially implantable device, a feasibility study exists. For indication, the assessment of positive airway pressure failure by sleep medicine is crucial, and the decision for HNS should be made in discussion of other treatment options for at least moderate OSA. The implantation center holds primarily responsibility among the interdisciplinary sleep team and is primary contact for the patient in problems. This depicts why structural processes are required to secure outcome quality and minimize the complications. The aftercare of HNS patients can be provided interdisciplinary and by different medical institutions, whereat, minimal reporting standards to document outcome and usage are recommended.

Allergo journal international 30(5), 155-168 (2021). doi:10.1007/s40629-021-00178-2, Published by Urban & Vogel, München

Rearrangements in the anaplastic lymphoma kinase (ALK) and proto-oncogene tyrosine-protein kinase ROS (ROS1) genes characterise two distinct molecular subsets of non-small cell lung cancer (NSCLC) tumours. Lorlatinib is a third-generation ALK/ROS1 tyrosine kinase inhibitor (TKI) shown to have systemic and intracranial activity in treatment-naive patients and in those who progressed on first- and second-generation TKIs. Despite being generally well tolerated, lorlatinib has a unique and challenging safety profile that includes hyperlipidaemia and central and peripheral nervous system adverse events (AEs). This article summarises a set of strategies designed to monitor and manage lorlatinib-related AEs that were agreed upon by a multidisciplinary panel of specialists in a meeting held in July 2020. Among the recommendations hereby described, special emphasis was placed on communication: prescribing physicians should inform patients and their families/caregivers about the likelihood and nature of lorlatinib AEs, encouraging them to report any symptoms, while at the same time reassuring them that most events are manageable and resolve spontaneously and have little to no interference with cancer treatment. Importantly, all patients should undergo a set of baseline assessments, including biochemical analysis, evaluation of cardiovascular risk, electrocardiogram (ECG), neurological evaluation and contrast-enhanced magnetic resonance imaging of the brain, which should be repeated regularly during lorlatinib treatment. Supportive medications to treat or relieve lorlatinib AEs were also discussed, as were the conditions requiring specialist consultations and/or adjustments in lorlatinib therapy. The overall goal of this article is to serve as a practical guide for oncologists to systematically and effectively approach lorlatinib AEs.