Search

The study aimed to select rice genotypes based on agronomic traits and commercial grain quality. The study was carried out in the 2014/15 and 2015/16 harvests in eight growing environments, located in the state of Rio Grande do Sul, Brazil. Fourteen rice genotypes were sown in each environment. The experiment was conducted in a randomized block design with four replications. The following agronomic traits were evaluated: number of days to flowering and grain yield as well as commercial grain quality traits: percentage of whole grains and percentage of chalky area in the grains. AMMI, GGE and MGIDI methodologies were used to select the best performing genotypes. Using the AMMI, GGE and MGDI methods, genotypes G9 and G1 performed close to the ideal ideotype for the number of days to grain flowering, yield and quality.

Copyright of Diversitas Journal is the property of Diversitas Journal and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Clinical Orthodontics is the property of Dental Press International and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Abstract This study aimed to produce Calabrese-type sausages on an industrial scale by incorporating nisin and mixtures of organic acids and their salts as preservatives. In addition, it was assessed the stability of the product during storage at 25 °C. Various formulations were investigated, each featuring distinct preservative combinations as follows: Treatment 1 (T1) included sodium lactate and sodium acetate; Treatment 2 (T2) contained sodium lactate, sodium acetate, citric acid, and nisin; Treatment 3 (T3) involved a combination of salt and nisin alongside sodium lactate; and a control group which utilized sodium lactate. The moisture values ranged from 55.84% to 57.45%, proteins from 18.53 to 19.07, and lipids from 17.04% to 19.15%, all following Brazilian legislation. The pH remained stable until 90 days of storage, with values of 6.30, 6.28, 6.05, and 6.23 for control, T1, T2, and T3, respectively. T2 presented higher acidity compared to the other formulations due to the presence of citric acid. The evaluated preservatives (T1, T2, and T3) showed lower lipid oxidation indices and inhibited microbial growth. Therefore, the evaluated preservatives have the potential to be used industrially because they maintain the characteristics of the product and ensure 120 days of storage at 25 °C.

Abstract The objective of this work was to evaluate common bean lines for yield and commercial grain quality in multi-environments, and to maximize the efficiency of selection using complementary methods. Over three crop years, 79 trials using carioca common bean lines were carried out in the dry, winter, and rainy crop seasons, in the Southern, Southeastern, Midwestern, and Northeastern regions of Brazil. The experimental design was a randomized complete block with three replicates and 17 genotypes. The evaluated traits were: grain yield (GY), grain appearance (GA), sieve yield (SY), and 100-seed weight (100SW). Adaptability and stability analyses were carried out using models that consider the genotype effect as fixed or as random, in a mixed-model perspective. A significant interaction between genotypes and environments was observed for all traits evaluated. The CNFC 15086 line presented the highest GY and 100SW, besides a high adaptability and stability. The most prominent line for GA was CNFC 15038. The CNFC 15097 line is recommended as a cultivar (BRS FC406) because it shows, simultaneously, favorable performances for GY, GA, SY, and 100SW, as well as for adaptability and stability.

Abstract Two different reactive concentrated magnesium hydroxide (HM) pulps, produced in a lab reactor mill, and a synthetic and non-reactive HM-pulp, for comparative analyses, have been prepared and studied. Sodium polyacrylate was selected as a dispersant for improving the HM pulp fluidity, with concentrations varying from 0.42% to 2.0% on a dry basis. The two reactive pulps differed from each other mainly by the impurity level and for both, a residual MgO amount was detected, implying that the hydration reaction could proceed. Results (with and without dispersant) confirmed the formation of particle clusters as HM concentration rose until a critical value, above which the pulp behaved as a solid. Reactive HM-pulps with high impurities may represent a limiting factor in the drying operation. Among all HM-pulps studied, the purest reactive pulp with 1% dispersant presented the best flow behavior making this reactive pulp the most suitable to be tested in a pilot spray dryer.

This study approaches the analysis of the stability of the epidemiological model SIR with loss of immunity. This is a model given by a system of ordinary differential equations. Initially, we present the model and its interpretation. Then we define the constants and elements that compose the model, so we present the results obtained using the qualitative theory of ordinary differential equations, especially the theory of planar systems related to the dynamics of fixed points. Finally, we show that the system representing the SIR model is globally stable and they have two types of dynamic that {depend on model constants}, and their meaning for epidemiology.

Ethyl-linked anthocyanin-flavanol pigments are one of the most important condensation products formed during the red winemaking and ageing period. They have great contribution to the color characteristics and stability of aged red wines. In this study, the color characteristics and stability of ethyl-linked anthocyanin-flavanol pigments and their precursor anthocyanins were evaluated by combined spectrophotometry and 3D molecular simulations. In model wine solutions, the condensation reactions between three anthocyanins and (-)-epicatechin, mediated by acetaldehyde, were conducted to produce ethyl-linked anthocyanin-flavanol pigments. The color was assessed by the CIELab method, and the concentration changes were analyzed by HPLC-DAD. On the other hand, the stability of these pigmented compounds was also calculated by the three 3D molecular simulation methods, that is molecular mechanics, molecular dynamics, and quantum chemistry simulation. The results obtained from CIELab analysis indicated that the formation of ethyl-linked anthocyanin-flavanol pigments resulted in a decrease of L*, a*, b* and C* values, and conversely, a rising of h* value. The 3D molecular simulations revealed that the stability of anthocyanins was as follows: Mv-3-O-glu > Pn-3-O-glu > Cy-3-O-glu. The cis or trans ethyl-linked anthocyanin-flavanol pigments were much more stable than their precursor anthocyanins. Among the pigments, ethyl-linked malvidin-3-O-glucoside-flavanol was more stable than ethyl-linked cyanidin-3-O-glucoside-flavanol and ethyl-linked peonidin-3-O-glucoside-flavanol.

My aim in this text is to call attention to possible problems involved in two frequent strategies among Descartes's readers who maintain, on the one hand, that the Cartesian epistemic project is based on the metaphysical foundation of the truth of clear and distinct ideas and, on the other hand, that there is no circle in defending this reasoning which, in some way, depends on the truth of clear and distinct ideas. [ABSTRACT FROM AUTHOR]

Copyright of Revista Foco (Interdisciplinary Studies Journal) is the property of Revista Foco and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Vector-borne diseases are a cause of concern all around the world, especially in Brazil. In the past few years, the Brazilian health system faced recurrent epidemics such as Dengue and Malaria as well as new cases of Chikungunya, Zika and Yellow Fever. Vector control continues to be one of the most important counter measures against these types of diseases. Mathematical models are important tools for planning vector control strategies. In this work we present an approach in order to calculate what is the minimum vector control intensity to obtain stability in a simple population’s dynamics model of mosquitoes.We combined numerical simulations with analytic results. Transcritical bifurcations appear in our analysis considering different control’s parameters values for the eggs, larvae, pupae and adults mosquitoes populations. A discussion about combined strategies of vector control was also showed.

Abstract The objective of this work was to select white oat (Avena sativa) genotypes for environments with and without fungicide application, as well as to identify relationships between meteorological variables and agronomic traits. Two experiments were carried out: one without and the other with the use of the tebuconazole fungicide. In each experiment, 26 genotypes were evaluated, conducted during ten years in the same experimental area; cultivation years were considered as one environment. The methodologies of genotype and of the genotypes x environments interaction were used to define the ideal genotype. 'URS Corona' is considered an ideal genotype due to its excellent responses in the environment with tebuconazole. The 'Brisasul', 'IPR Aphrodite', and 'URS Taura' genotypes respond better in the environment without the fungicide. However, based on multitraits, the 'URS Taura' and 'IPR Afrodite' genotypes can be positioned in environments with or without the use of tebuconazole. Genotypes with a rust incidence lower than 15% and a height higher than 93 cm in an environment with a relative humidity lower than 70.75% have a higher grain yield regardless of fungicide use. Greater magnitudes of air temperature and solar radiation result in a higher grain yield of white oat, regardless of fungicide use.

In this work we analyze the approximation error in Sobolev norms for quasi-interpolation operators in spline spaces. We establish in a general way the hypotheses on a quasi-interpolant to achieve the optimal order of approximation. Finally, we propose simple but general constructions of such operators that satisfy the established hypotheses and illustrate their performance through some numerical tests.

Copyright of Revista Colombiana de Investigaciones Agroindustriales is the property of Revista Colombiana de Investigaciones Agroindustriales del Centro Agropecuario Sena Buga and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Abstract The objective of this work was to develop a drying process using the foam-layer method to obtain the powder from butiá (Butia spp.) pulp, as well as to characterize this powder according to its yield and physicochemical and technological characteristics. The foam was optimized for density and stability by varying whipping times and albumin and xanthan gum concentrations. Foam drying was optimized for vitamin C retention and yield using different foam thicknesses and drying temperatures. The optimized foam showed a density of 0.25 g cm-3 and a high stability, being suitable for subsequent drying. The lowest foam thickness (0.50 cm) and the highest drying temperature (80°C) resulted in the highest retention of vitamin C, whereas the increase in drying temperature improved yield. The butiá pulp powder obtained under the optimized condition presented an acid pH of 3.25, a low humidity of 7.97%, a water activity of 0.206, a water retention capacity of 4.90 g H2O per gram of powder, a solubility of 74.40%, a soluble solids content of 61°Brix, and a predominantly yellow color. The foam-layer drying method can be used to obtain butiá pulp powder.

ABSTRACT Objective: The aim of this prospective clinical study was to compare the clinical outcomes of three different fixed lingual retainers, in terms of effects on periodontal health and success rate. Methods: Forty five patients aged 13 to 25 years were randomly assigned into three groups, using bonded upper and lower lingual retainers. The study groups were as follows: Group 1- Bond-A-Braid®, Group 2- everStick® ORTHO, Group 3- Super-Splint. The follow-up appointments were performed two weeks (Baseline=T0), one month (T1), three months (T2), and six months (T3) after the application of retainers. Plaque Index (PI), Gingival Index (GI), Probing Depth (PD), Bleeding in Probing (BOP) and Retainer Failure were assessed at each appointment. Results: The everStick Ortho group showed significantly lower PI values on the upper-lower lingual side after three (p=0.008) and six (p=0.001) months. The everStick Ortho group had significantly lower upper lingual (GI) levels after six months, and lower lingual side levels after one month. The Super-Splint group showed significantly lower PD values on the upper lingual side after six months. The everStick Ortho group presented significantly lower BOP levels after six months on the upper lingual side. No significant differences between the groups (p>0.05) in terms of retainer failure were found. Conclusions: The everStick Ortho group presented better results in terms of periodontal health. The failure rates of the retainers were similar.

Introduction: Over the years, the search for improving self-care has extended to compound pharmacy, where the cosmetic can be manipulated according to the preferences of each person. Thus, it is necessary to provide stability for each product handled, ensuring that a safe and effective cosmetic will be dispensed. Hyaluronic acid is an active that has become popular due to its ability to maintain skin elasticity and exert a moisturizing function, in addition to acting in the reduction of fine lines. Aim: To analyze the quality of cosmetics manipulated with the active ingredient of Hyaluronic Acid from different compound pharmacies in the city of Campo Grande-MS, through physical-chemical laboratory analysis and labeling. Material and methods: Four samples of 5% hyaluronic acid-based cream-gel were acquired from master pharmacies, and the following quality control analyzes were carried out: organoleptic analysis, pH determination, density, centrifuge test, spreadability and labeling analysis. Results: Regarding the analyses, the results obtained were satisfactory. The organoleptic analysis, the centrifugation test and the spreadability were within the stipulated standards; however, the density test stands out, in which two samples obtained results below the stipulated; and for label analysis, no product contained a list of formulation components. Conclusion: At the end of the analyses, it can be pointed out that the products presented satisfactory performance in most of the proposed tests and are a safe option, of good quality and accessible to the public. [ABSTRACT FROM AUTHOR]

ABSTRACT Maneuvers to activate the equine's core can make a difference in their physical and psychic health. Although these activities are recommended and practiced, there is little research proving their effectiveness. This article aims to describe, through surface electromyography, the occurrences, durations and sequences activity of longissimus dorsi, rectus abdominis and gluteus medius during thoracolumbar flexion (TLF), lumbar and lumbosacral flexion (LLSF), global flexion (GF), which is the combination of TLF and LLSF, and tail traction (TT). Seven healthy adult horses of three different breeds performed five repetitions of these movements for five seconds (sec). Electromyographic activity was captured with non-invasive superficial sensors positioned in the skin regions covering these muscles. The sequence was performed once per animal, muscle activity captured by surface electromyography, data from two replicates of each animal were selected, analyzed on matLab software and data tabulation were described during each maneuver. These maneuvers provoked punctual and transient activation of muscles mentioned above, confirming the ability to activate equine core muscles. However, responses were not standardized, which means there were variations of occurrence, duration and sequence, suggesting that for practical application of those maneuvers it is necessary to perform more repetitions with longer durations to activate more muscles.

ABSTRACT Introduction: In several conditions, outcome stability is a great challenge for Orthodontics. Previous studies have reported that relapse commonly occurs along the years after orthodontic treatment finishing. Objective: The aim of the present study was to evaluate in the long-term transversal dental arch changes of Class II division 1 patients treated with cervical headgear and fixed appliance. Methods: Plaster study casts of 20 patients treated with cervical headgear without dental extractions were 3D-scanned and evaluated in three distinct times: initial (T1), immediate post-treatment (T2) and long-term retention (T3 - minimum 20 years). Transversal teeth distance of maxillary and mandibular canines, premolars and first molars were measured. Results: A statistically significant increase during treatment was observed for all maxillary teeth transversal distances (p< 0.05). In turn, a significant reduction was observed in the long term (p

The aim of the present study was to analyze the factors with the greatest influence on the early termination of the career of soccer players. The sample consisted of 40 former professional soccer athletes. To collect the results, a semi-structured questionnaire was used, elaborated by the authors themselves, which addressed topics such as athletes' biography; psychological and sociological aspects of the career; causes, problems, and difficulties with the end of a career; emotions experienced in this process and the occurrence of injuries throughout the career. Data were analyzed quantitatively through the distribution of absolute and relative frequency. By analyzing the results, it was possible to verify that 55% of the sample abandoned their football player career in the age group of 21 to 25 years. In addition, 37.5% of the sample received an amount equivalent to less than the minimum wage when they were still football players. In relation to the current monthly income, 52.5% of the sample currently receives between 1 to 2 minimum wages. It was also possible to observe that 90.0% of the sample chose the profession of soccer player because of “Pleasure in playing soccer”. On the other hand, the main reason for abandoning the football player career was the “Lack of stability in the profession” with a percentage of 37.5%. The results of the present study showed that the lack of stability and low salaries in the football player profession, in addition to injuries throughout their careers, were the main reasons for early abandonment of the profession.

Copyright of Intercontinental Journal of Sport Management / Revista Intercontinental de Gestão Desportiva is the property of Revista Intercontinental de Gestao Desportiva and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Revista do Instituto de Laticínios Cândido Tostes is the property of Revista do Instituto de Laticinios Candido Tostes and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

ABSTRACT This comment came to refute and correct the idea of Charles (2007) about the negatively implications in the income distribution when the government expand the consumption in favour to households. We prove that the political choice, to both cases (increasing consumption or increasing profit), impact positively the income distribution and does not affect the essential nature of the Kaldor neo-Pasinetti dynamic equilibrium results and the “Cambridge Equation”. The stability of the model is guarantee by applying the Olech’s Theorem to the case.

ABSTRACT Introduction: Controversial reports suggest a relationship between growth pattern and cortical alveolar bone thickness, and its effect in the use of mini-implants. Objective: The main purpose of this study was to assess the influence of the growth pattern on the cortical alveolar bone thickness and on the stability and success rate of mini-implants. Methods: Fifty-six mini-implants were inserted in the buccal region of the maxilla of 30 patients. These patients were allocated into two groups, based on their growth pattern (horizontal group [HG] and vertical group [VG]). Cortical thickness was measured using Cone Beam Computed Tomography. Stability of mini-implants, soft tissue in the insertion site, sensitivity during loading and plaque around the mini-implants were evaluated once a month. Intergroup comparisons were performed using t tests, Mann-Whitney tests, and Fisher exact tests. Correlations were evaluated with Pearson’s correlation coefficient. Results: The cortical bone thickness was significantly greater in the HG at the maxillary labial anterior region and at the mandibular buccal posterior and labial anterior regions. There was a significant negative correlation between Frankfort-mandibular plane angle (FMA) and the labial cortical thickness of the maxilla, and with the labial and lingual cortical bone thicknesses of the mandible. No significant intergroup difference was found for mini-implant mobility and success rate. No associated factor influenced stability of the mini-implants. Conclusions: Growth pattern affects the alveolar bone cortical thickness in specific areas of the maxilla and mandible, with horizontal patients presenting greater cortical bone thickness. However, this fact may have no influence on the stability and success rate of mini-implants in the maxillary buccal posterior region.

Iron and zinc deficiencies in humans can cause serious health problems. Increasing the iron (IC) and zinc (ZC) concentrations in common bean (Phaseolus vulgaris L.) grains using genetic breeding can be an effective strategy to prevent these problems. Thus, the aims of this study were i) to investigate the importance of genetic, environmental, and genotype-by-environment interaction effects on IC and ZC in common bean grains; ii) to select cultivars that have high mean values and phenotypic stability for IC and ZC, as well as high protein concentration (PC), high yield, and standard commercial grain quality; and iii) to investigate whether there is a genetic relationship between these traits. A total of 34 cultivars were evaluated in 19 different environments. Genetic variability was observed among the genotypes for all traits. For IC and ZC, the environmental effect represented most of the total variation (63% and 65%, respectively), and the effect of the G × E interaction was 18% for IC and 15% for ZC. The genetic correlations between IC, ZC, and PC were positive, indicating that the selection of one of these traits resulted in gains for the other. The genetic correlations between IC or ZC with yield or 100-grain weight were low or intermediate, but negative, indicating that it is important to evaluate these traits at all stages of breeding programs that focus on developing cultivars with high IC and ZC. The cultivar BRS Sublime, with the carioca grain type, combined high IC, ZC, and PC, high yield, and grains of commercial size.

Abstract The objective of this work was to simultaneously select pre-commercial grain sorghum hybrids with high adaptability and yield stability, through mixed modeling, in 20 environments, during six years. The evaluated plant material consisted of 57 commercial grain sorghum hybrids. In all experiments, hybrids were arranged in a triple lattice design; some experiments used a 6x6 lattice, and others, a 5x5 lattice. Adaptability and stability parameters were obtained based on the prediction by harmonic mean of the relative performance of genotypic values (HMRPGV). The mixed models proved to be adequate to analyze the genotype x environment (GxE) interaction and the genotypic adaptability and stability studies on grain sorghum. The hybrids that stand out, considering all environments are 1G282, A9904, 50A50, A9902, and XB6022. The A9904 hybrid stands out in favorable environments, with a grain yield above average. Only 1G282 is among the five best hybrids for each group of environments, and it is the best grain sorghum hybrid for yield performance, adaptability, and stability. The predicted genotypic values based on genotypic means can be used in the environments with the same GxE interaction pattern because they are free of the GxE interaction.

Copyright of Revista Jurídica (0103-3506) is the property of Revista Juridica and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Galician Journal of Economics / Revista Galega de Economía is the property of Universidad de Santiago de Compostela, Servicio de Publicaciones and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper presents the design and analysis of a signal estimator with improved robustness applied in the active damping (AD) of a single-phase grid-tied inverter with LCL low-pass filter. The proposed estimator is based on the mathematical model of the LCL filter, with resistors in series with the converter-side inductor and capacitor for improving robustness. The implementation method is also capable of estimate multiple filter signals. The control strategy presented uses a virtual resistor based AD, that suppresses the resonance ensuring stability and robustness, helping comply with power quality standards, such as IEEE 1547 and IEC 61727. The signal necessary for achieving the AD is obtained through the estimator, dismissing the use of additional sensors. The current control structure uses grid-side current feedback with proportional-resonant controller and harmonic compensation. The system is designed by the root locus approach to achieve stability despite grid parameter variance. The estimator and overall system is analyzed through mathematical modeling, computational simulation and experimental setup. The results show that the estimator presented is capable of providing the necessary AD feedback signal, even with grid inductance variation.

ABSTRACT Introduction: Orthodontic mini-implants (MI) are a reliable alternative to provide temporary orthodontic anchorage. Prior to miniscrew insertion, the best approach would be to evaluate each possible insertion site and measure the cortical bone thickness, and verify whether it would provide adequate primary stability. Objective: This study aimed to evaluate the difference in cortical bone thickness in areas of mini-implants insertion in patients of different ages, by means of cone beam computed tomography (CBCT). Methods: The sample of this retrospective study was composed of 123 CBCT scans, which were used to measure cortical bone thickness in the buccal and palatal inter-radicular space in the mesial region of the first permanent molars. These measures were compared by using the Student’s t-test, ANOVA/Tukey tests, and Linear regression between male and female subjects, from 12 to 30 years old. Results: No significant difference was found in cortical bone thickness between sex, race and sagittal facial patterns. Significantly higher measurement values were observed in patients older than 12 years of age at all sites evaluated. The coefficient β at the adjusted linear regression analysis showed that at each increment in age, mean cortical thickness values increased by 0.06mm in the mandible, 0.03mm in the buccal region and 0.02mm in the palatal region of the maxilla. Conclusions: The increase in cortical bone thickness was positively associated with age; that is, the more advanced the patient’s age was, the less chance there was of failure due to primary stability.

The constitutional complaint is a typically Brazilian legal institute, which emerged in the jurisprudence of the Supreme Court (STF) and gained extreme importance throughout its historical phases, especially since its codification in the Code of Civil Procedure of 2015 (CPC). Its essence is the purpose of preserving the jurisdiction of the courts and ensuring the authority of their decisions. However, in the current context of difficult access of the upper courts, due to the obstacle of art. 1030 of the CPC, is presented as a mechanism to guarantee the procedural subjects to urge the superior courts to promote the revision of their precedents, thereby avoiding the stiffening of the right of the country and promoting the natural and desired dialogue of the courts with their own decisions.

ABSTRACT Objective: To evaluate the 3x3 bonded retainer influence on the mandibular anterior crowding in cases treated with mandibular incisor extraction Methods: The sample comprised pretreatment, posttreatment and follow-up orthodontic records of 16 subjects (10 females and 6 males) with Class I malocclusion treated with extraction of a single mandibular incisor. The mean ages (± SD) at pretreatment, posttreatment and follow-up evaluation were 23.45 ± 9.14 years, 25.50 ± 8.95 years and 30.11 ± 8.59 years, respectively. The mean (± SD) treatment time and posttreatment evaluation time were 2.05 ± 0.45 years and 4.60 ± 1.85 years , respectively. Little irregularity index and interdental widths were evaluated using dental casts. The sample was divided into two subgroups, according to the presence of the 3x3 bonded retainer at follow-up. Results: The subgroup without 3x3 bonded retainer presented a greater relapse at the follow-up, when compared to 3x3 bonded retainer subgroup. Conclusion: There was a significant relapse in cases treated with mandibular incisor extraction at follow-up. The subgroup without 3x3 bonded retainer showed a significant relapse at the follow-up when compared to the retainer group.

Introduction: Podoposturology is the area that studies postural dysfunctions. In prevention and treatment, it uses the thermomoldable proprioceptive insoles principle, developed by the French René Bordiol in 1980. This principle is based on the action of reliefs, used in the insoles, and placed under the skin and muscles at specific points, to correct the positioning of the foot and body. The parts for the treatment are chosen after a clinical evaluation, which aims to identify the origin of the dysfunction. Correction with postural insoles requires a follow-up from the beginning to the end, so the patient will have a new positioning, without the use of an orthosis, after the treatment. Objective: Conduct a revisional study on postural insoles and podoposturology. Methods: The study consists of a literature review aimed to find information about Podoposturology. Articles, written in Brazilian Portuguese, were searched on the Scielo (Scientific Electronic Library Online), Medline, PubMed, and Lilacs databases. Conclusion: Podoposturology and postural insoles are important tools in rehabilitation since they bring postural benefits and corrections of musculoskeletal changes. [ABSTRACT FROM AUTHOR]

ABSTRACT Identification of cowpea genotypes with high protein content for specific environments, based on the genotype-environment interaction, has a positive impact in places where access to protein for human consumption is deficient. The objective of the study was to analyze the protein content of 10 cowpea bean genotypes in five environments in the Caribbean Region of Colombia. The randomized complete block design with four replications at each site was used. The analysis of the genotype-environment interaction (GEI) was performed using the AMMI (additive main effects and multiplicative interaction) and SREG (regression in sites) models, in which the main effects of genotypes (G) + GEI are part of the bilinear term of the model. The AMMI and SREG models and their biplots were useful in the analysis and interpretation of the protein content of cowpea beans from experiments carried out in multiple environments. The AMMI model identified genotypes 1, 4 and 8 as those with the greatest adaptability and stability, and the Montería (MO7B), Mahates (MA7B) and Cereté (CE7B) environments as the most favorable. The SREG model identified a potential mega-environment constituted by the PN7B, MA7B and CE7B environments, in which genotypes 1, 2 and 3 presented greater adaptability and stability, while genotype 8 showed specific adaptability in MO7B. In both models, genotypes 6, 7 and 10 showed absence of adaptability and stability in the studied environments.

Abstract The objective of this work was to evaluate the interaction between genotypes and environment for seed-coat darkening of common bean (Phaseolus vulgaris) seeds, in order to select lines that combine slow darkening, upright plants, resistance to lodging, and higher yield and 100-grain weight, with good adaptability and stability for these traits. Forty four pre-selected lines, originating from crosses between one cultivar with slow darkening and prostrate plants and four cultivars with normal darkening and upright plants, were evaluated in field trials conducted in 15 environments (combinations of locations, crop seasons, and years). Considering the mean values, adaptability, and stability for each isolated trait, most of the lines presented satisfactory performance: 75% for slow darkening, 48% for high yield, 59% for upright plants, 84% for resistance to lodging, and 68% for 100-grain weight. The effects of environments and of the genotype by environment interaction are important for the five studied traits. The CNFC 16754 and CNFC 16820 lines present slow seed-coat darkening, high yield and 100-grain weight, more upright plant architecture, and greater resistance to lodging, besides high adaptability and stability for these traits, which shows their potential for recommendation as new cultivars and confirms that it is possible to join desirable phenotypes for the five traits evaluated.

ABSTRACT Agricultural ground vehicles often have to traverse unstructured terrain, i.e., terrain whose conditions cannot be precisely predicted during its displacement. Such characteristics restrict the use of robots in the agricultural field because their stability could be compromised by their interaction with the terrain. As it does not have a human operator capable of observing, predicting, and controlling the interaction of the vehicle with the terrain. Therefore, a robot must deal with the unpredictability caused by this interaction, a task that was previously performed by the human operator. Given the relevance of the topic, this study investigates the literature on agricultural unmanned ground vehicles from the stability point of view, and also presents relevant criteria for dealing with the stability of agricultural robots in terms of their design and selection.

Copyright of Revista Brasileira de Ciencias Sociais is the property of Revista Brasileira de Ciencias Sociais and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

ABSTRACT The aim of this work was to evaluate the effects of variations in soil compaction on the stability of the slope embankments of fish farms used in aquaculture. Computational modeling was performed using the RocScience Slide 6.0 program, simulating filling scenarios, fast lowering and stationary regimes for the full operation of the fish farms. The data used in these simulations were obtained from soil characterization tests in the laboratory. The geometry of the levees, the inclination of the slopes and the crest width and height, also necessary for modeling, were obtained from field data and technical projects. The modeling generated a safety factor (SF) for the upstream and downstream slopes of the levees, considering different upstream slopes, for three types of levees (L1, L2 and L3). The results have shown that the variation in soil compaction, regardless of the upstream inclination of the slopes, maintains the stability of the levee slopes, as it generated safety factors above the acceptable minimum (> 1.5). Decreasing the speed of lowering the water column in the fish farm does not compromise the stability of the embankments of the levees. The construction of superficial pond levees for aquaculture can be performed at points below the optimum water contents for compaction since the stabilization of these structures showed SF values above the minimum required.

ABSTRACT Mixing acerola pulp with whey, a by-product of the dairy industry, led to this study, whose aim was the development of a powdered beverage mix of acerola pulp, whey and maltodextrin (DE20). To determine the proportions of the mixture, a simplex-centroid mixture design was used. Different proportions of the mixture were dehydrated in a spray dryer at 175 °C. The results were evaluated in relation to hygroscopicity, moisture and ascorbic acid. Higher proportions of whey and pulp increased hygroscopicity and moisture, while maltodextrin reduced these parameters. An increase in pulp content raised the levels of ascorbic acid. The proportions (m m-1) of 50% acerola pulp, 25% whey and 25% maltodextrin resulted in significantly lower hygroscopicity (8.25 g 100 g-1) and moisture (1.66%), and appreciable levels of ascorbic acid (1492.49 g 100 g-1). The results indicated that the powder obtained shows good stability after 75 days of storage, with 9.20%, 1.79% and 1146.13 g 100 g-1 of hygroscopicity, moisture and ascorbic acid respectively.

The aim of this paper is to investigate the stability problem for the pexiderized trigonometric functional equation f₁(xy)+f₂(xσ(y))=2g₁(x)g₂(y), x,y∈G, where G is an arbitrary group, f₁,f₂,g₁ and g₂ are complex valued functions on G and σ is an involution of G. Results of this paper also can be extended to the setting of monoids (that is, a semigroup with identity) that need not be abelian.

ABSTRACT Introduction: Shorter miniscrew implants (MSIs) are needed to make orthodontics more effective and efficient. Objective: To evaluate the stability, insertion torque, removal torque and pain associated with 3 mm long MSIs placed in humans by a novice clinician. Methods: 82 MSIs were placed in the buccal maxillae of 26 adults. Pairs of adjacent implants were immediately loaded with 100g. Subjects were recalled after 1, 3, 5, and 8 weeks to verify stability and complete questionnaires pertaining to MSI-related pain and discomfort. Results: The overall failure rate was 32.9%. The anterior and posterior MSIs failed 35.7% and 30.0% of the time, respectively. Excluding the 10 MSIs (12.2%) that were traumatically dislodged, the failure rates in the anterior and posterior sites were 30.1% and 15.2%, respectively; the overall primary failure rate was 23.6%. Failures were significantly (p= 0.010) greater (46.3% vs 19.5%) among the first 41 MSIs than the last 41 MSIs that were placed. Excluding the traumatically lost MSIs, the failures occurred on or before day 42. Subjects experienced very low pain (2.2% of maximum) and discomfort (5.5% of maximum) during the first week only. Conclusions: Shorter 3 mm MSIs placed by a novice operator are highly likely to fail. However, failure rates can be substantially decreased over time with the placement of more MSIs. Pain and discomfort experienced after placing 3 mm MSIs is minimal and temporary.

The modular multilevel converter is composed of many equal submodules connected in series, each having to ideally withstand the same voltage and current stresses. The resulting configuration when each SM capacitor feeds its own auxiliary power supply is unstable during at least part of the converter precharge process. SM capacitor voltages can diverge until a protection trips in. The system can be stabilized by adding a balancing resistor in parallel to each SM capacitor. In this work, models for the dc-side precharge of the modular multilevel converter are proposed and its dynamics are analyzed in depth. The worst case parameter combination is found by running the models for all possible combinations within certain discrete ranges. A conservative estimation of the balancing resistor value is proposed by analysis of the results.

Copyright of Anuario do Instituto de Geociencias is the property of Universidade Federal do Rio de Janeiro, Instituto de Geociencias and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Revista do Instituto de Laticínios Cândido Tostes is the property of Revista do Instituto de Laticinios Candido Tostes and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Abstract Acerola and camu-camu fruits possess high vitamin C content. However, since these fruits are little consumed in their fresh form, it is important to consider that vitamin C can be oxidized depending on storage conditions. Thus, this study aimed to produce acerola and camu-camu powders by spray drying to maintain the stability of their vitamin C content during storage. Acerola and camu-camu powders were characterized in relation to their physicochemical characteristics, antioxidant activity, and vitamin C concentration and stability under different storage conditions (30 °C and 40 °C, 75% relative humidity). In general, the powders were proven to be stable, with low water activity (< 0.40) and humidity (< 4.0 g/100 g powder), as well as high vitamin C concentrations (1593.2 and 6690.4 mg/100 g of powder for acerola and camu-camu, respectively). Furthermore, we observed a high antioxidant activity by ABTS●+, DPPH• and FRAP assays. The powders stored at lower temperature (30 °C) showed higher vitamin C stability. In conclusion, acerola and camu-camu powders produced by spray drying are potential sources of vitamin C and active compounds and are therefore suitable for several food industry applications.

Abstract The comparison of vegetation at two different moments allows for recognizing the stability of plant communities. The structure and floristic composition of a Caatinga fragment in the municipality of Poço Verde, state of Sergipe, were evaluated after four years (2011-2015). Sampling was performed through 30 plots of 20 m × 20 m, considering individuals with circumference at breast height ≥ 6 cm. Despite the increase in density (0.79%) and basal area (4.82%), changes in floristic composition, in Shannon-Wiener diversity (from 3.33 nats.ind-1 to 3.30 nats.ind-1) and in Pielou equability (from 0.78 to 0.80) were small. None of the structural parameters evaluated (richness, density, basal area, importance value and Shannon-Wiener diversity) significantly differed between evaluation periods. The vegetation remained stable over time, tolerating current anthropization levels and enabling the use of its natural resources through planned management.

Crude oil can show high viscosity due to the presence of W/O (water-in-oil) emulsion structure and/or the presence of a high concentration of asphaltenes (as in heavy oil), causing difficulties during pipeline transport. The production of O/W emulsion by solid particles is an alternative to decrease oil viscosity. Thus, the objective of this study is to obtain low viscous O/W (oil-in-water) emulsions by the addition of an aqueous phase containing sodium bentonite. Emulsions were characterized in conductivity, rheology, kinetic stability and droplet size analyses. W/O to O/W emulsions transition occurred between 30 and 40% (m/m) of aqueous solution, according to the conductivity and rheology analyzes. The increment of water content from 30 to 50 % (w/w) increased mean droplet size and phase separation, and decreased emulsion viscosity. Solid particles addition affects emulsions properties, producing systems with smaller droplet size and lower viscosity than crude oil. In this way, it can be concluded that sodium bentonite was efficient to induce emulsion inversion and produce O/W emulsion with low viscosity, making easier oil pumping and pipeline transportation. Óleo cru pode apresentar elevada viscosidade devido à presença de uma estrutura do tipo emulsão A/O (água-em-óleo) e/ou à presença de altas concentrações de asfalteno (com em presentes em óleo pesado), levando a dificuldades durante o seu escoamento em oleodutos. A produção de emulsões O/A (óleo-em-água) a partir de partículas sólidas é uma alternativa para alcançar a redução da viscosidade do óleo de petróleo. Assim, o objetivo deste estudo é obter emulsões O/A através da adição de solução aquosa contendo partícula de bentonita. As emulsões foram caracterizadas em análises de condutividade, reologia, estabilidade cinética e tamanho de gotas. A transição de emulsões A/O para O/A ocorreu entre 30 e 40 % (m/m) de solução aquosa, segundo as análises de condutividade e reologia. O incremento de solução aquosa de 30 para 40 % (m/m) aumentou o tamanho médio de gotas e a separação de fases, e diminui a viscosidade das emulsões. A adição de partículas sólidas afetou as propriedades das emulsões, produzindo sistemas de menor tamanho de gota e menor viscosidade que o óleo cru. Neste sentido, pode-se concluir que a bentonita sódica foi eficiente na inversão da emulsão e na produção de emulsões O/A de baixa viscosidade, facilitado o bombeamento e transporte do petróleo em dutos.

Copyright of Nativa is the property of Revista Nativa and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)